Commit Graph

186 Commits

Author SHA1 Message Date
Christoph Hellwig 2a3d4eb8e2 scsi: flip the default on use_clustering
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page.  Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Nilesh Javali 037bc0d434 scsi: qedi: Update driver version to 8.33.0.21
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Manish Rangankar 9632a6b4b7 scsi: qedi: Move LL2 producer index processing in BH.
1. Removed logic to update HW producer index in interrupt context.

2. Update HW producer index after UIO ring and buffer gets initialized.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Nilesh Javali dcceeeb71f scsi: qedi: add module param to set ping packet size
Default packet size is 0x400. For jumbo packets set to 0x2400.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Manish Rangankar cdd3ff87f1 scsi: qedi: Add packet filter in light L2 Rx path.
Add packet filter to avoid unnecessary packet processing in iscsiuio.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Manish Rangankar d5632b11f0 scsi: qedi: Check for session online before getting iSCSI TLV data.
The kernel panic was observed after switch side perturbation,

BUG: unable to handle kernel NULL pointer dereference at (null)
     IP: [<ffffffff8132b5a0>] strcmp+0x20/0x40
     PGD 0 Oops: 0000 [#1] SMP
CPU: 8 PID: 647 Comm: kworker/8:1 Tainted: G        W  OE  ------------   3.10.0-693.el7.x86_64 #1
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/20/2018
Workqueue: slowpath-13:00. qed_slowpath_task [qed]
task: ffff880429eb8fd0 ti: ffff880429190000 task.ti: ffff880429190000
RIP: 0010:[<ffffffff8132b5a0>]  [<ffffffff8132b5a0>] strcmp+0x20/0x40
RSP: 0018:ffff880429193c68  EFLAGS: 00010202
RAX: 000000000000000a RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff88042bda7a41
RBP: ffff880429193c68 R08: 000000000000ffff R09: 000000000000ffff
R10: 0000000000000007 R11: ffff88042b3af338 R12: ffff880420b007a0
R13: ffff88081aa56af8 R14: 0000000000000001 R15: ffff88081aa50410
FS:  0000000000000000(0000) GS:ffff88042fe00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000019f2000 CR4: 00000000003407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff880429193d20 ffffffffc02a0c90 ffffc90004b32000 ffff8803fd3ec600
ffff88042bda7800 ffff88042bda7a00 ffff88042bda7840 ffff88042bda7a40
0000000129193d10 2e3836312e323931 ff000a342e363232 ffffffffc01ad99d
Call Trace:
[<ffffffffc02a0c90>] qedi_get_protocol_tlv_data+0x270/0x470 [qedi]
[<ffffffffc01ad99d>] ? qed_mfw_process_tlv_req+0x24d/0xbf0 [qed]
[<ffffffffc01653ae>] qed_mfw_fill_tlv_data+0x5e/0xd0 [qed]
[<ffffffffc01ad9b9>] qed_mfw_process_tlv_req+0x269/0xbf0 [qed]

Fix kernel NULL pointer deref by checking for session is online before
getting iSCSI TLV data.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Nilesh Javali 1a291bce5e scsi: qedi: Allocate IRQs based on msix_cnt
The driver load on some systems failed with error,
[0004:01:00.5]:[qedi_request_msix_irq:2524]:8: request_irq failed.

Allocate the IRQs based on MSIX count obtained from qed module instead of
number of queues.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Nilesh Javali fa97c51109 scsi: qedi: Replace PAGE_SIZE with QEDI_PAGE_SIZE
Use QEDI_PAGE_SIZE for enablement of module on systems with 64K page size.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Nilesh Javali f853053da9 scsi: qedi: Fix spelling mistake "OUSTANDING" -> "OUTSTANDING"
Fix trivial spelling mistake within macro definition.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:47 -05:00
Nilesh Javali 3fb5a21fd0 scsi: qedi: Cleanup redundant QEDI_PAGE_SIZE macro definition
Remove redundant macro definition.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28 20:51:46 -05:00
Jens Axboe f664a3cc17 scsi: kill off the legacy IO path
This removes the legacy (non-mq) IO path for SCSI.

Cc: linux-scsi@vger.kernel.org
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Linus Torvalds d49f8a52b1 SCSI misc on 20181024
This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
 qla2xxx, lpfc, libsas, hisi_sas.  In addition there's a set of mostly
 small updates to the target subsystem a set of conversions to the
 generic DMA API, which do have some potential for issues in the older
 drivers but we'll handle those as case by case fixes. A new myrs for
 the DAC960/mylex raid controllers to replace the block based DAC960
 which is also being removed by Jens in this merge window. Plus the
 usual slew of trivial changes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW9BQJSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU3MAP41T8yW
 UJQDCprj65pCR+9mOUWzgMvgAW/15ouK89x/7AD/XAEQZqoAgpFUbgnoZWGddZkS
 LykIzSiLHP4qeDOh1TQ=
 =2JMU
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
  qla2xxx, lpfc, libsas, hisi_sas.

  In addition there's a set of mostly small updates to the target
  subsystem a set of conversions to the generic DMA API, which do have
  some potential for issues in the older drivers but we'll handle those
  as case by case fixes.

  A new myrs driver for the DAC960/mylex raid controllers to replace the
  block based DAC960 which is also being removed by Jens in this merge
  window.

  Plus the usual slew of trivial changes"

[ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even
  wonder. There's also a "myrb" driver, where the 'b' stands for
  'block'. Truly, somebody has got mad naming skillz. - Linus ]

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits)
  scsi: myrs: Fix the processor absent message in processor_show()
  scsi: myrs: Fix a logical vs bitwise bug
  scsi: hisi_sas: Fix NULL pointer dereference
  scsi: myrs: fix build failure on 32 bit
  scsi: fnic: replace gross legacy tag hack with blk-mq hack
  scsi: mesh: switch to generic DMA API
  scsi: ips: switch to generic DMA API
  scsi: smartpqi: fully convert to the generic DMA API
  scsi: vmw_pscsi: switch to generic DMA API
  scsi: snic: switch to generic DMA API
  scsi: qla4xxx: fully convert to the generic DMA API
  scsi: qla2xxx: fully convert to the generic DMA API
  scsi: qla1280: switch to generic DMA API
  scsi: qedi: fully convert to the generic DMA API
  scsi: qedf: fully convert to the generic DMA API
  scsi: pm8001: switch to generic DMA API
  scsi: nsp32: switch to generic DMA API
  scsi: mvsas: fully convert to the generic DMA API
  scsi: mvumi: switch to generic DMA API
  scsi: mpt3sas: switch to generic DMA API
  ...
2018-10-25 07:40:30 -07:00
Christoph Hellwig 7ae7ce0bbe scsi: qedi: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:58:53 -04:00
Nilesh Javali 3cc5746e5a scsi: qedi: Initialize the stats mutex lock
Fix kernel NULL pointer dereference,

Call Trace:
  [<ffffffff9b7658e6>] __mutex_lock_slowpath+0xa6/0x1d0
  [<ffffffff9b764cef>] mutex_lock+0x1f/0x2f
  [<ffffffffc061b5e1>] qedi_get_protocol_tlv_data+0x61/0x450 [qedi]
  [<ffffffff9b1f9d8e>] ? map_vm_area+0x2e/0x40
  [<ffffffff9b1fc370>] ? __vmalloc_node_range+0x170/0x280
  [<ffffffffc0b81c3d>] ? qed_mfw_process_tlv_req+0x27d/0xbd0 [qed]
  [<ffffffffc0b6461b>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed]
  [<ffffffffc0b81c59>] qed_mfw_process_tlv_req+0x299/0xbd0 [qed]
  [<ffffffff9b02a59e>] ? __switch_to+0xce/0x580
  [<ffffffffc0b61e5b>] qed_slowpath_task+0x5b/0x80 [qed]

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28 02:28:05 -04:00
Nilesh Javali c77a2fa3ff scsi: qedi: Add the CRC size within iSCSI NVM image
The QED driver commit, 1ac4329a1c ("qed: Add configuration information
to register dump and debug data"), removes the CRC length validation
causing nvm_get_image failure while loading qedi driver:

[qed_mcp_get_nvm_image:2700(host_10-0)]Image [0] is too big - 00006008 bytes
where only 00006004 are available
[qedi_get_boot_info:2253]:10: Could not get NVM image. ret = -12

Hence add and adjust the CRC size to iSCSI NVM image to read boot info at
qedi load time.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30 07:15:22 -04:00
Linus Torvalds 72f02ba66b SCSI misc on 20180815
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
 hisi_sas, smartpqi, megaraid_sas, arcmsr.  In addition, with the
 continuing absence of Nic we have target updates for tcmu and target
 core (all with reviews and acks).  The biggest observable change is
 going to be that we're (again) trying to switch to mulitqueue as the
 default (a user can still override the setting on the kernel command
 line).  Other major core stuff is the removal of the remaining
 Microchannel drivers, an update of the internal timers and some
 reworks of completion and result handling.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
 dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
 o/JckEZZpIp+5NySZNc=
 =ggLB
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
  hisi_sas, smartpqi, megaraid_sas, arcmsr.

  In addition, with the continuing absence of Nic we have target updates
  for tcmu and target core (all with reviews and acks).

  The biggest observable change is going to be that we're (again) trying
  to switch to mulitqueue as the default (a user can still override the
  setting on the kernel command line).

  Other major core stuff is the removal of the remaining Microchannel
  drivers, an update of the internal timers and some reworks of
  completion and result handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
  scsi: ufs: remove unnecessary query(DM) UPIU trace
  scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
  scsi: aacraid: Spelling fix in comment
  scsi: mpt3sas: Fix calltrace observed while running IO & reset
  scsi: aic94xx: fix an error code in aic94xx_init()
  scsi: st: remove redundant pointer STbuffer
  scsi: qla2xxx: Update driver version to 10.00.00.08-k
  scsi: qla2xxx: Migrate NVME N2N handling into state machine
  scsi: qla2xxx: Save frame payload size from ICB
  scsi: qla2xxx: Fix stalled relogin
  scsi: qla2xxx: Fix race between switch cmd completion and timeout
  scsi: qla2xxx: Fix Management Server NPort handle reservation logic
  scsi: qla2xxx: Flush mailbox commands on chip reset
  scsi: qla2xxx: Fix unintended Logout
  scsi: qla2xxx: Fix session state stuck in Get Port DB
  scsi: qla2xxx: Fix redundant fc_rport registration
  scsi: qla2xxx: Silent erroneous message
  scsi: qla2xxx: Prevent sysfs access when chip is down
  scsi: qla2xxx: Add longer window for chip reset
  ...
2018-08-15 22:06:26 -07:00
Bart Van Assche 15d258674b scsi: qedi: Fix a potential buffer overflow
Tell snprintf() to store at most 255 characters in the output buffer
instead of 256. This patch avoids that smatch reports the following
warning:

drivers/scsi/qedi/qedi_main.c:891: qedi_get_boot_tgt_info() error: snprintf() is printing too much 256 vs 255

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <QLogic-Storage-Upstream@cavium.com>
Cc: <stable@vger.kernel.org>
Acked-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30 22:30:32 -04:00
Manish Rangankar a3440d0d2f scsi: qedi: Send driver state to MFW
In case of iSCSI offload BFS environment, MFW requires to mark virtual
link based upon qedi load status.

Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-10 22:25:55 -04:00
Dan Carpenter 915d9b7142 scsi: qedi: tidy up a size calculation
The id_tbl->table pointer points to unsigned long so static checkers
complain that instead of 4 we should be allocating sizeof(long) bytes.

We're trying to allocate enough bits for the bitmap.  The size variable is
always 1024.  (1024 / 32 * 4) is the same as (1024 / 64 * 8) so this
doesn't change runtime, but this is the more idiomatic way to do it and
makes the static checker happy.

[mkp: typo]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02 16:17:22 -04:00
Bart Van Assche c2cdef9516 scsi: qedi: Fix misleading indentation
This patch avoids that smatch reports the following warnings:

drivers/scsi/qedi/qedi_fw_api.c:129: init_sqe() warn: inconsistent indenting
drivers/scsi/qedi/qedi_fw_api.c:137: init_sqe() warn: inconsistent indenting

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: QLogic-Storage-Upstream@cavium.com
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:30:11 -04:00
Kees Cook 6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Michal Kalderon d52c89f120 qed*: Utilize FW 8.37.2.0
This FW contains several fixes and features.

RDMA
- Several modifications and fixes for Memory Windows
- drop vlan and tcp timestamp from mss calculation in driver for
  this FW
- Fix SQ completion flow when local ack timeout is infinite
- Modifications in t10dif support

ETH
- Fix aRFS for tunneled traffic without inner IP.
- Fix chip configuration which may fail under heavy traffic conditions.
- Support receiving any-VNI in VXLAN and GENEVE RX classification.

iSCSI / FcoE
- Fix iSCSI recovery flow
- Drop vlan and tcp timestamp from mss calc for fw 8.37.2.0

Misc
- Several registers (split registers) won't read correctly with
  ethtool -d

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05 10:48:09 -04:00
Manish Rangankar 269afb3603 qedi: Add get_generic_tlv_data handler.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22 23:29:54 -04:00
Manish Rangankar 534bbdf883 qedi: Add support for populating ethernet TLVs.
This patch adds callbacks for providing the ethernet protocol driver TLVs.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22 23:29:54 -04:00
Sudarsana Reddy Kalluru cac6f69154 qed: Add support for Unified Fabric Port.
This patch adds driver changes for supporting the Unified Fabric Port
(UFP). This is a new paritioning mode wherein MFW provides the set of
parameters to be used by the device such as traffic class, outer-vlan
tag value, priority type etc. Drivers receives this info via notifications
from mfw and configures the hardware accordingly.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:46:10 -04:00
Linus Torvalds 052c220da3 SCSI for-linus on 20180404
This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
 ufs, mpt3sas, hisi_sas.  In addition we have removed several really
 old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed
 the old scsi_module.c initialization from all remaining drivers.  Plus
 an assortment of bug fixes, initialization errors and other minor
 fixes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWsVSnSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbvbAP9ErpTZ
 OR5iJ5HIz4W3Bd8aTfEpJrDyeYwSUC+sra5SKQD/ZWyVB3fYFSg+ZROyT26pmtmd
 SdImhG7hLaHgVvF5qRQ=
 =SQ/n
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
  ufs, mpt3sas, hisi_sas.

  In addition we have removed several really old drivers: sym53c416,
  NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c
  initialization from all remaining drivers.

  Plus an assortment of bug fixes, initialization errors and other minor
  fixes"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits)
  scsi: ufs: Add support for Auto-Hibernate Idle Timer
  scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries
  scsi: qla2xxx: fx00 copypaste typo
  scsi: qla2xxx: fix error message on <qla2400
  scsi: smartpqi: update driver version
  scsi: smartpqi: workaround fw bug for oq deletion
  scsi: arcmsr: Change driver version to v1.40.00.05-20180309
  scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready
  scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.
  scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug
  scsi: qla2xxx: Update driver version to 10.00.00.06-k
  scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling
  scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
  scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY
  scsi: qla2xxx: Remove nvme_done_list
  scsi: qla2xxx: Return busy if rport going away
  scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change
  scsi: qla2xxx: Add FC-NVMe abort processing
  scsi: qla2xxx: Add changes for devloss timeout in driver
  ...
2018-04-05 15:05:53 -07:00
James Bottomley 2e1f44f6ad Merge branch 'fixes' into misc
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi:
qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc
scsi: qla2xxx: Fix FC-NVMe LUN discovery"

Merge is non-trivial and has been verified by Qlogic (Cavium)

Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
2018-04-03 17:38:39 -07:00
Masanari Iida bc8282a730 treewide: Fix typos in printk
This patch fixes spelling typos found in printk.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-27 09:51:22 +02:00
Linus Torvalds be75b1b8bc SCSI fixes on 20180306
This patch is mostly fixes for driver specific issues (nine of them)
 and the storvsc performance improvement with interrupt handling which
 was dropped from the previous fixes pull request.  We also have two
 regressions: one is a double call_rcu() in ATA error handling and the
 other is a missed conversion to BLK_STS_OK in
 __scsi_error_from_host_byte().
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWp7/dCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSYAAP0RiYSR
 oq3yLesh09tx0u+w2He8ylpdVizIzNMTjNE+BAD9GqeQWEvNaoGPUwNeMFJuwawX
 hNjOttF1YOfFlsuoG94=
 =9e1j
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is mostly fixes for driver specific issues (nine of them) and the
  storvsc performance improvement with interrupt handling which was
  dropped from the previous fixes pull request.

  We also have two regressions: one is a double call_rcu() in ATA error
  handling and the other is a missed conversion to BLK_STS_OK in
  __scsi_error_from_host_byte()"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Fix kernel crash during port toggle
  scsi: qla2xxx: Fix FC-NVMe LUN discovery
  scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()
  scsi: core: Avoid that ATA error handling can trigger a kernel hang or oops
  scsi: qla2xxx: ensure async flags are reset correctly
  scsi: qla2xxx: do not check login_state if no loop id is assigned
  scsi: qla2xxx: Fixup locking for session deletion
  scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS
  scsi: mpt3sas: wait for and flush running commands on shutdown/unload
  scsi: mpt3sas: fix oops in error handlers after shutdown/unload
  scsi: storvsc: Spread interrupts when picking a channel for I/O requests
  scsi: megaraid_sas: Do not use 32-bit atomic request descriptor for Ventura controllers
2018-03-07 10:50:15 -08:00
Manish Rangankar 967823d6c3 scsi: qedi: Fix kernel crash during port toggle
BUG: unable to handle kernel NULL pointer dereference at 0000000000000100

[  985.596918] IP: _raw_spin_lock_bh+0x17/0x30
[  985.601581] PGD 0 P4D 0
[  985.604405] Oops: 0002 [#1] SMP
:
[  985.704533] CPU: 16 PID: 1156 Comm: qedi_thread/16 Not tainted 4.16.0-rc2 #1
[  985.712397] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.4.3 01/17/2017
[  985.720747] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
[  985.725996] RSP: 0018:ffffa4b1c43d3e10 EFLAGS: 00010246
[  985.731823] RAX: 0000000000000000 RBX: ffff94a31bd03000 RCX: 0000000000000000
[  985.739783] RDX: 0000000000000001 RSI: ffff94a32fa16938 RDI: 0000000000000100
[  985.747744] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000a33
[  985.755703] R10: 0000000000000000 R11: ffffa4b1c43d3af0 R12: 0000000000000000
[  985.763662] R13: ffff94a301f40818 R14: 0000000000000000 R15: 000000000000000c
[  985.771622] FS:  0000000000000000(0000) GS:ffff94a32fa00000(0000) knlGS:0000000000000000
[  985.780649] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  985.787057] CR2: 0000000000000100 CR3: 000000067a009006 CR4: 00000000001606e0
[  985.795017] Call Trace:
[  985.797747]  qedi_fp_process_cqes+0x258/0x980 [qedi]
[  985.803294]  qedi_percpu_io_thread+0x10f/0x1b0 [qedi]
[  985.808931]  kthread+0xf5/0x130
[  985.812434]  ? qedi_free_uio+0xd0/0xd0 [qedi]
[  985.817298]  ? kthread_bind+0x10/0x10
[  985.821372]  ? do_syscall_64+0x6e/0x1a0

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-01 20:16:54 -05:00
Arnd Bergmann edd066a100 scsi: qedi: fix build regression
A bugfix I did caused a build regression in some other randconfig
builds in a rare combination of options:

In file included from drivers/scsi/qedi/qedi_fw.c:16:
drivers/scsi/qedi/qedi_gbl.h:26:38: error: array type has incomplete element type 'struct qedi_debugfs_ops'
 extern const struct qedi_debugfs_ops qedi_debugfs_ops[];
                                      ^~~~~~~~~~~~~~~~

This removes the useless #ifdef around the declarations in qedi_dbg.h
to make it always build.

Fixes: 779936faf4 ("scsi: qedi: fix building with LTO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-27 21:19:13 -05:00
Linus Torvalds 170e07bf6b SCSI fixes on 20180222
These are mostly fixes for problems with merge window code.  In
 addition we have one doc update (alua) and two dead code removals
 (aiclib and octogon) a spurious assignment removal (csiostor) and a
 performance improvement for storvsc involving better interrupt
 spreading and increasing the command per lun handling.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWo+H2yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe2eAQDyWfoK
 Mfjbrl6cdPop+JIoED0VtBzAQyeXceJt8GYDQwEApXTIZon2HTdJqGawfUhaapBA
 JnO6iOiC13/nZjl7C28=
 =K3Pk
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "These are mostly fixes for problems with merge window code.

  In addition we have one doc update (alua) and two dead code removals
  (aiclib and octogon) a spurious assignment removal (csiostor) and a
  performance improvement for storvsc involving better interrupt
  spreading and increasing the command per lun handling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla4xxx: skip error recovery in case of register disconnect.
  scsi: aacraid: fix shutdown crash when init fails
  scsi: qedi: Cleanup local str variable
  scsi: qedi: Fix truncation of CHAP name and secret
  scsi: qla2xxx: Fix incorrect handle for abort IOCB
  scsi: qla2xxx: Fix double free bug after firmware timeout
  scsi: storvsc: Increase cmd_per_lun for higher speed devices
  scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  scsi: scsi_dh: Document alua_rtpg_queue() arguments
  scsi: Remove Makefile entry for oktagon files
  scsi: aic7xxx: remove aiclib.c
  scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
  scsi: sym53c8xx_2: iterator underflow in sym_getsync()
  scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
  scsi: csiostor: remove redundant assignment to pointer 'ln'
  scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
  scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
  scsi: qla2xxx: Fix memory corruption during hba reset test
  scsi: mpt3sas: fix an out of bound write
2018-02-23 14:09:43 -08:00
Arnd Bergmann 779936faf4 scsi: qedi: fix building with LTO
When link-time optimizations are enabled, qedi fails to build because
of mismatched prototypes:

drivers/scsi/qedi/qedi_gbl.h:27:37: error: type of 'qedi_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch]
 extern const struct file_operations qedi_dbg_fops;
                                     ^
drivers/scsi/qedi/qedi_debugfs.c:239:30: note: 'qedi_dbg_fops' was previously declared here
 const struct file_operations qedi_dbg_fops[] = {
                              ^
drivers/scsi/qedi/qedi_gbl.h:26:32: error: type of 'qedi_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch]
 extern struct qedi_debugfs_ops qedi_debugfs_ops;
                                ^
drivers/scsi/qedi/qedi_debugfs.c:102:25: note: 'qedi_debugfs_ops' was previously declared here
 struct qedi_debugfs_ops qedi_debugfs_ops[] = {

This changes the declaration to match the definition, and adapts the
users as necessary. Since both array can be constant here, I'm adding
the 'const' everywhere for consistency.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13 21:37:00 -05:00
Nilesh Javali 2c08fe64e4 scsi: qedi: Cleanup local str variable
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13 21:35:40 -05:00
Andrew Vasquez 1683ce57f5 scsi: qedi: Fix truncation of CHAP name and secret
The data in NVRAM is not guaranteed to be NUL terminated.  Since
snprintf expects byte-stream to accommodate null byte, the CHAP secret
is truncated.  Use sprintf instead of snprintf to fix the truncation of
CHAP name and secret.

Signed-off-by: Andrew Vasquez <andrew.vasquez@cavium.com>
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13 21:35:39 -05:00
Linus Torvalds b2fe5fa686 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Significantly shrink the core networking routing structures. Result
    of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

 2) Add netdevsim driver for testing various offloads, from Jakub
    Kicinski.

 3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

 4) Add a 2nd listener hash table for TCP, similar to what was done for
    UDP. From Martin KaFai Lau.

 5) Add eBPF based queue selection to tun, from Jason Wang.

 6) Lockless qdisc support, from John Fastabend.

 7) SCTP stream interleave support, from Xin Long.

 8) Smoother TCP receive autotuning, from Eric Dumazet.

 9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
    Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
    Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
    from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
    Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
    Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
    Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
  tls: Add support for encryption using async offload accelerator
  ip6mr: fix stale iterator
  net/sched: kconfig: Remove blank help texts
  openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
  tcp_nv: fix potential integer overflow in tcpnv_acked
  r8169: fix RTL8168EP take too long to complete driver initialization.
  qmi_wwan: Add support for Quectel EP06
  rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
  ipmr: Fix ptrdiff_t print formatting
  ibmvnic: Wait for device response when changing MAC
  qlcnic: fix deadlock bug
  tcp: release sk_frag.page in tcp_disconnect
  ipv4: Get the address of interface correctly.
  net_sched: gen_estimator: fix lockdep splat
  net: macb: Handle HRESP error
  net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
  ipv6: addrconf: break critical section in addrconf_verify_rtnl()
  ipv6: change route cache aging logic
  i40e/i40evf: Update DESC_NEEDED value to reflect larger value
  bnxt_en: cleanup DIM work on device shutdown
  ...
2018-01-31 14:31:10 -08:00
Manish Rangankar a1a20ffde2 scsi: qedi: Drop cqe response during connection recovery
We get stuck in the loop when firmware sends a cqe response during
connection recovery.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-22 20:04:01 -05:00
Himanshu Jha e9f31779a5 scsi: qedi: Use zeroing allocator instead of allocator/memset
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset
0.

Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci

Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10 23:25:09 -05:00
Tomer Tayar 41e87c91f4 qed*: Advance drivers' version to 8.33.0.20
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 13:59:16 -05:00
Tomer Tayar da09091732 qed*: Utilize FW 8.33.1.0
Advance the qed* drivers to use firmware 8.33.1.0:
Modify core driver (qed) to utilize the new FW and initialize the device
with it. This is the lion's share of the patch, and includes changes to FW
interface files, device initialization flows, FW interaction flows, and
debug collection flows.
Modify Ethernet driver (qede) to make use of new FW in fastpath.
Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath.
Modify FCoE driver (qedf) to make use of new FW in fastpath.
Modify iSCSI driver (qedi) to make use of new FW in fastpath.

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com>
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 13:59:16 -05:00
Tomer Tayar 21dd79e82f qed*: HSI renaming for different types of HW
This patch renames defines and structures in the FW HSI files to allow a
distinction between different types of HW.

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 13:59:15 -05:00
Tomer Tayar a2e7699eb5 qed*: Refactoring and rearranging FW API with no functional impact
This patch refactors and reorders the FW API files in preparation of
upgrading the code to support new FW.

- Make use of the BIT macro in appropriate places.
- Whitespace changes to align values and code blocks.
- Comments are updated (spelling mistakes, removed if not clear).
- Group together code blocks which are related or deal with similar
 matters.

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02 13:59:15 -05:00
Jia-Ju Bai b128458876 scsi: qedi: Fix a possible sleep-in-atomic bug in qedi_process_tmf_resp
The driver may sleep under a spinlock.
The function call path is:
qedi_cpu_offline (acquire the spinlock)
  qedi_fp_process_cqes
    qedi_mtask_completion
      qedi_process_tmf_resp
        kzalloc(GFP_KERNEL) --> may sleep

To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool(DSAC) and checked by my
code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-20 21:11:51 -05:00
Linus Torvalds 5bbcc0f595 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...
2017-11-15 11:56:19 -08:00
Michal Kalderon f436baf326 qed: Fix iWARP out of order flow
Out of order flow is not working for iWARP.
This patch got cut out from initial series that added out
of order support for iWARP.

Make out of order code common for iWARP and iSCSI.
Add new configuration option CONFIG_QED_OOO. Set by
qedr and qedi Kconfigs.

Fixes: d1abfd0b4e ("qed: Add iWARP out of order support")

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 12:46:43 +01:00
Christos Gkekas 8712f467d4 scsi: qedi: Delete redundant variables
Remove redundant variables in quedi_fw.c that are set but not used.

Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 23:25:14 -04:00
James Bottomley 2441500a41 Merge branch 'fixes' into misc 2017-09-07 12:12:43 -07:00
Dan Carpenter fa2d9d6e89 scsi: qedi: off by one in qedi_get_cmd_from_tid()
The > here should be >= or we end up reading one element beyond the end
of the qedi->itt_map[] array.  The qedi->itt_map[] array is allocated in
qedi_alloc_itt().

Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-28 22:12:39 -04:00
Manish Rangankar 42d7c10f23 scsi: qedi: Limit number for CQ queues.
[qed_sp_iscsi_func_start:189(host_7-0)]Cannot satisfy CQ amount. Queues
requested 8, CQs available 4. Aborting function start

Above condition will resolve as management firmware is capable of
telling us the number of CQs available for a given PF, qed will
communicate the same number to qedi, So that qedi will know how much CQs
are allowed.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:28:50 -04:00
Dan Carpenter 2c67521821 scsi: qedi: Fix return code in qedi_ep_connect()
We shouldn't be writing over the "ret" variable.  It means we return
ERR_PTR(0) which is NULL and it results in a NULL dereference in the
caller.

Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24 22:24:29 -04:00
Nilesh Javali cc20c29ebc scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig
qedi uses iscsi_boot_sysfs to export the targets used for boot to
sysfs. Select the config option to make sure the module is built.

This addresses the compile time issue,
    drivers/scsi/qedi/qedi_main.o: In function `qedi_remove':
    qedi_main.c:(.text+0x3bbd): undefined reference to `iscsi_boot_destroy_kset'
    drivers/scsi/qedi/qedi_main.o: In function `__qedi_probe.constprop.0':
    qedi_main.c:(.text+0x577a): undefined reference to `iscsi_boot_create_target'
    qedi_main.c:(.text+0x5807): undefined reference to `iscsi_boot_create_target'
    qedi_main.c:(.text+0x587f): undefined reference to `iscsi_boot_create_initiator'
    qedi_main.c:(.text+0x58f3): undefined reference to `iscsi_boot_create_ethernet'
    qedi_main.c:(.text+0x5927): undefined reference to `iscsi_boot_destroy_kset'
    qedi_main.c:(.text+0x5d7b): undefined reference to `iscsi_boot_create_host_kset'

[mkp: fixed whitespace]

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Fixes: c57ec8fb7c ("scsi: qedi: Add support for Boot from SAN over iSCSI offload")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24 22:06:29 -04:00
Colin Ian King 4feca6a52b scsi: qedi: fix another spelling mistake: "alloction" -> "allocation"
Trivial fix to spelling mistake in QEDF_ERR message. I should have also
included this in a previous fix, but I only just spotted this one.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-12 17:10:51 -04:00
Nilesh Javali c57ec8fb7c scsi: qedi: Add support for Boot from SAN over iSCSI offload
This patch adds support for Boot from SAN over iSCSI offload. The iSCSI
boot information in the NVRAM is populated under
/sys/firmware/iscsi_bootX/ using qed NVM-image reading API and further
exported to open-iscsi to perform iSCSI login enabling boot over offload
iSCSI interface in a Boot from SAN environment.

Signed-off-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@cavium.com>
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-12 16:52:27 -04:00
Linus Torvalds 9031114841 SCSI misc on 20170704
This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
 qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
 a host of minor and miscellaneous changes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZW7JMAAoJEAVr7HOZEZN4IM4P/AqBtvH+6Lo1Eb+3A/HnHskK
 hIxVxgBxaw3fhW5AegDfVCvrdVTTEkCB/g5CIKN8NCWEx6OGmCX0Lu6lnjld9BOZ
 cTlPtzNwFGlgHrz34LwCc3vlc5ovMpTQBrpGAQpGGWoAZIP+c3ilEihIYTEMNCsN
 dmjI71AigDE5g6X1OT361IJ1gydkjfG41IcRe/jlMtEgRNdy3B2JVIdATL89Pw4b
 0uZO3uUTn8EGEKUdyJZCNpie7sGZv8u2LhA+Znby2C4h3bwWNV/d0p7ped4xrQY5
 yVpZEUbYVdcOOYBgeBJlfwOhvjRQTdxeK4d7W9XTb+AQf30F3DgSepdMCdf3BjVt
 KnQvBOTxyidB8xsCL46wlxxNew3qoUtaKoY88WUOOnnJwU5U7hlRtPkf/eO2i5QF
 +k7fxUpFfkBTS4I2gXnyGWpmSoxwJerd0knojSOjrjJcAlcgM65+pocUAea/0Dpr
 SsfL2sTb12gk6bkF9UlRv8/4aSsWYb92WW1nbTt2nFRXncPNN5Qzc3lGj//36O+b
 2bka+aSKVAFoNAnQ1pUE8EJxSboy5q7y4509iZzO/Fom+pVuzBROm5fmrpcOE5dP
 IjW7gqSFB6578tnNiK049rrrPja5wkUa+Ptc8s0FjPAVyIDrp2RN+f2nljOBBhW8
 3Z1nXMG0eFqvb5taLtfZ
 =D9QX
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
  qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
  a host of minor and miscellaneous changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits)
  qla2xxx: Fix NVMe entry_type for iocb packet on BE system
  scsi: qla2xxx: avoid unused-function warning
  scsi: snic: fix a couple of spelling mistakes/typos
  scsi: qla2xxx: fix a bunch of typos and spelling mistakes
  scsi: lpfc: don't double count abort errors
  scsi: lpfc: spin_lock_irq() is not nestable
  scsi: hisi_sas: optimise DMA slot memory
  scsi: ibmvfc: constify dev_pm_ops structures.
  scsi: ibmvscsi: constify dev_pm_ops structures.
  scsi: cxlflash: Update debug prints in reset handlers
  scsi: cxlflash: Update send_tmf() parameters
  scsi: cxlflash: Avoid double free of character device
  scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state
  scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
  scsi: ufs: flush eh_work when eh_work scheduled.
  scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock
  scsi: sun_esp: fix device reference leaks
  scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init
  scsi: fnic: correct speed display and add support for 25,40 and 100G
  scsi: fnic: added timestamp reporting in fnic debug stats
  ...
2017-07-06 12:10:33 -07:00
David S. Miller b079115937 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
A set of overlapping changes in macvlan and the rocker
driver, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 12:43:08 -04:00
Christos Gkekas e365cab14f scsi: qedi: Remove comparison of u16 idx with zero.
Variable idx is defined as u16 thus statement (idx < 0) is always false
and should be removed.

Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26 15:01:05 -04:00
Manish Rangankar 02d94e0474 scsi: qedi: Remove WARN_ON from clear task context.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-19 21:53:42 -04:00
Manish Rangankar 6ebf81536d scsi: qedi: Remove WARN_ON for untracked cleanup.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-19 21:53:36 -04:00
David S. Miller 216fe8f021 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just some simple overlapping changes in marvell PHY driver
and the DSA core code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 22:20:08 -04:00
Mintz, Yuval 712c3cbf19 qed: Replace set_id() api with set_name()
Current API between qed and protocol modules allows passing an
additional private string - but it doesn't get utilized by qed
anywhere.

Clarify the API by removing it and renaming it 'set_name'.

CC: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24 15:17:19 -04:00
manish.rangankar@cavium.com b19775e478 scsi: qedi: Fix endpoint NULL panic during recovery.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-23 22:16:43 -04:00
Nilesh Javali 3d61a31322 scsi: qedi: set max_fin_rt default value
max_fin_rt is the maximum re-transmission of FIN packets
as part of the termination flow. After reaching this value
the FW will send a single RESET.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-23 22:16:43 -04:00
manish.rangankar@cavium.com 962ea1c0df scsi: qedi: Set firmware tcp msl timer value.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-23 22:16:43 -04:00
manish.rangankar@cavium.com 0ea9314f4e scsi: qedi: Fix endpoint NULL panic in qedi_set_path.
RIP: 0010:qedi_set_path+0x114/0x570 [qedi]
 Call Trace:
  [<ffffffffa0472923>] iscsi_if_recv_msg+0x623/0x14a0
  [<ffffffff81307de6>] ? rhashtable_lookup_compare+0x36/0x70
  [<ffffffffa047382e>] iscsi_if_rx+0x8e/0x1f0
  [<ffffffff8155983d>] netlink_unicast+0xed/0x1b0
  [<ffffffff81559c30>] netlink_sendmsg+0x330/0x770
  [<ffffffff81510d60>] sock_sendmsg+0xb0/0xf0
  [<ffffffff8101360b>] ? __switch_to+0x17b/0x4b0
  [<ffffffff8163a2c8>] ? __schedule+0x2d8/0x900
  [<ffffffff81511199>] ___sys_sendmsg+0x3a9/0x3c0
  [<ffffffff810e2298>] ? get_futex_key+0x1c8/0x2b0
  [<ffffffff810e25a0>] ? futex_wake+0x80/0x160

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-23 22:16:43 -04:00
manish.rangankar@cavium.com d0788a528d scsi: qedi: Set dma_boundary to 0xfff.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-23 22:16:43 -04:00
manish.rangankar@cavium.com fc2fbf0d42 scsi: qedi: Correctly set firmware max supported BDs.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-23 22:16:43 -04:00
Arun Easi 5e901d0b15 scsi: qedi: Fix bad pte call trace when iscsiuio is stopped.
munmap done by iscsiuio during a stop of the service triggers a "bad
pte" warning sometimes. munmap kernel path goes through the mmapped
pages and has a validation check for mapcount (in struct page) to be
zero or above. kzalloc, which we had used to allocate udev->ctrl, uses
slab allocations, which re-uses mapcount (union) for other purposes that
can make the mapcount look negative. Avoid all these trouble by invoking
one of the __get_free_pages wrappers to be used instead of kzalloc for
udev->ctrl.

 BUG: Bad page map in process iscsiuio  pte:80000000aa624067 pmd:3e6777067
 page:ffffea0002a98900 count:2 mapcount:-2143289280
     mapping: (null) index:0xffff8800aa624e00
 page flags: 0x10075d00000090(dirty|slab)
 page dumped because: bad pte
 addr:00007fcba70a3000 vm_flags:0c0400fb anon_vma: (null)
     mapping:ffff8803edf66e90 index:0

 Call Trace:
     dump_stack+0x19/0x1b
     print_bad_pte+0x1af/0x250
     unmap_page_range+0x7a7/0x8a0
     unmap_single_vma+0x81/0xf0
     unmap_vmas+0x49/0x90
     unmap_region+0xbe/0x140
     ? vma_rb_erase+0x121/0x220
     do_munmap+0x245/0x420
     vm_munmap+0x41/0x60
     SyS_munmap+0x22/0x30
     tracesys+0xdd/0xe2

Signed-off-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-23 22:16:42 -04:00
Mintz, Yuval 7b6859fbdc qed: Utilize FW 8.20.0.0
This pushes qed [and as result, all qed* drivers] into using 8.20.0.0
firmware. The changes are mostly contained in qed with minor changes
to qedi due to some HSI changes.

Content-wise, the firmware contains fixes to various issues exposed
since the release of the previous firmware, including:
 - Corrects iSCSI fast retransmit when data digest is enabled.
 - Stop draining packets when receiving several consecutive PFCs.
 - Prevent possible assertion when consecutively opening/closing
   many connections.
 - Prevent possible assertion due to too long BDQ fetch time.

In addition, the new firmware would allow us to later add iWARP support
in qed and qedr.

Changes from previous version
-----------------------------
 - V2: Fix warning in qed_debug.c

Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18 13:21:40 -04:00
Linus Torvalds 8d5e72dfdf SCSI misc on 20170503
This update includes the usual round of major driver updates
 (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex).  There's also
 the usual amount of cosmetic and spelling stuff.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZClQkAAoJEAVr7HOZEZN4OmkP/j/JJx2ImGzTgil5S8yeSWPY
 5Gqb8IK9rCQ+OJgCZYCz3JsLZZnwY4ODZ9tC1lO/3he6VfjIhcEs2/eXbTnEfsZx
 D3EwWEVR3wYBNZN0d4hQoudVbdCf6UuvsUvM1hDFO7by10qFEs0DqsufccpDlpG/
 us96BWf7PgiNzHYSvZIlmsfEDzNDRRg7Dm1NuLOQvXw56zFGsrysCO6Tqg7/ScJm
 Unz/VlEe1DE7zE9QotsKNCht7xHkmn1vfuva1wqG2wMp7EHf0rKnavRYrWUrxiEy
 2ig6GpR7mIHmVHS8PAMNhyS6iNxGQ3e50sAvZdqDlq42P73AEwbrOo5YhgsTJxWT
 vCpRAzSuHwPOPY3W2Aa1yJ10iOpoPKxXs2xSZuzpcz8XJ3RjHy+l90Y0VT4Jrvzv
 +dSY1cynshFccZmw2HQanlt1Ly9G3U8xmx8KIbnsIPCdSIQaQQD27H+Ip0YZ0fKt
 aLmMcQzffma3UP/LPmRAQ45bwx8rLi9M3DWbWOGmSkIRY3etPCXqNuDcC6h5p9TF
 4W74oVcELTql/u8ATZNSbdHBsWAg3GATIkAgdqwLTk/CU/0OgGY8epILr3EM2bc6
 vVbglwP9DiyVOikTLhVNJdZA97qHjZ1WXNo03eefFTBfPDcUlkZw4j2gufGuNFh2
 5vA4C/aSl9uxaLInr3aC
 =kj7u
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...
2017-05-04 12:19:44 -07:00
Kees Cook efacae6d4c scsi: qedi: qedf: Use designated initializers
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.

For these cases, terminate the list with { }, which will be zero-filled,
instead of undesignated NULLs.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-19 22:10:25 -04:00
David S. Miller 6f14f443d3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 08:24:51 -07:00
Manish Rangankar 046885251a scsi: qedi: Add PCI device-ID for QL41xxx adapters.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-15 19:00:57 -04:00
Elena Reshetova 6dc618cdd6 scsi: libiscsi: qedi: convert iscsi_task.refcount from atomic_t to refcount_t
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter. This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-15 18:44:39 -04:00
David S. Miller 101c431492 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/broadcom/genet/bcmgenet.c
	net/core/sock.c

Conflicts were overlapping changes in bcmgenet and the
lockdep handling of sockets.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15 11:59:10 -07:00
Mintz, Yuval be086e7c53 qed*: Utilize Firmware 8.15.3.0
This patch advances the qed* drivers into using the newer firmware -
This solves several firmware bugs, mostly related [but not limited to]
various init/deinit issues in various offloaded protocols.

It also introduces a major 4-Cached SGE change in firmware, which can be
seen in the storage drivers' changes.

In addition, this firmware is required for supporting the new QL41xxx
series of adapters; While this patch doesn't add the actual support,
the firmware contains the necessary initialization & firmware logic to
operate such adapters [actual support would be added later on].

Changes from Previous versions:
-------------------------------
 - V2 - fix kbuild-test robot warnings

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 15:33:09 -07:00
Arnd Bergmann bd571195c9 scsi: qedi: fix build error without DEBUG_FS
Without CONFIG_DEBUG_FS, we run into a link error:

drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_poll':
qedi_iscsi.c:(.text.qedi_ep_poll+0x134): undefined reference to `do_not_recover'
drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_disconnect':
qedi_iscsi.c:(.text.qedi_ep_disconnect+0x36c): undefined reference to `do_not_recover'
drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_connect':
qedi_iscsi.c:(.text.qedi_ep_connect+0x350): undefined reference to `do_not_recover'
drivers/scsi/qedi/qedi_fw.o: In function `qedi_tmf_work':
qedi_fw.c:(.text.qedi_tmf_work+0x3b4): undefined reference to `do_not_recover'

This defines the symbol as a constant in this case, as there is no way to
set it to anything other than zero without DEBUG_FS. In addition, I'm renaming
it to qedi_do_not_recover in order to put it into a driver specific namespace,
as "do_not_recover" is a really bad name for a kernel-wide global identifier
when it is used only in one driver.

Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06 22:22:16 -05:00
Colin Ian King d1a9ccc4b1 scsi: qedi: fix missing return error code check on call to qedi_setup_int
The call to qedi_setup_int is not updating the return code rc yet rc is
being checked for an error. Fix this by assigning rc to the return code
from the call to qedi_setup_int.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-28 21:55:24 -05:00
Dupuis, Chad 42a70abddd scsi: qedi: Fix memory leak in tmf response processing.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-27 22:21:26 -05:00
Linus Torvalds cdc194705d SCSI misc on 20170220
This update includes the usual round of major driver updates (ncr5380,
 ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid,
 megaraid_sas, ).  There's also an assortment of minor fixes and the
 major update of switching a bunch of drivers to pci_alloc_irq_vectors
 from Christoph.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYq5adAAoJEAVr7HOZEZN4bjUP/Atk7CSZVnC75pcYmncbEGCx
 ysOlEHK4uW2HhiAYk3PlYMk+pKrMHet2zsbbM9PHJfopdOHZ7Sq1+UZZVeqE1Zun
 8pe0NhON+fZx7XAnevdEvnSSULQZ+AGfjZO72iUwkJiN3ozYaFtCITOyn49l4GpR
 ra9emskBh7CQOFW2voGn1AKeDijPYGx3+TO4AUrWjVMiByR06gb1bmImx+ljiUrs
 jzRJPfrt90ORcTdpMateyN2EXxudcASMhX03SJ6fRI84hPAhMCROMbTv8RnzOTE4
 DPbnvbYUowlHt43iUhJHSwGdkRRaRBnkzQENBp1fNrNzZgF6vB7+kShxbonrYB2p
 gC4ewaJr0BNj+HsUnvTpe3WseiPOcfsnBsKilPLKBlm2dCKEXqFox/dj/T1uexxg
 HoyFrl3u8fyEqVHrzRS4M9t/njWh0NFmXxb0wBdj+lkVFTRErGSKQ8SfOqshuSGs
 P8NN88jy8vC7uqgzKBJ+UH3ehzn3qfBxasFHIC/e2awY9FqKjHGTxKMmSVpjXVxy
 wCvE2FQ3k/qEj2XSM6f7/NGytlSOlju5q1rFtHPW2M+TFSh0LJWCnmVjR/Zle9em
 pBWmtIgCv8W5b41zL2H94nLWAZbfdrrNU/XnX88l47LKnmorte/PGhpxu36NEsMS
 VCgreQmFMdMRY+WzDWl1
 =cBQx
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (ncr5380,
  ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid,
  megaraid_sas, ...).

  There's also an assortment of minor fixes and the major update of
  switching a bunch of drivers to pci_alloc_irq_vectors from Christoph"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits)
  scsi: megaraid_sas: handle dma_addr_t right on 32-bit
  scsi: megaraid_sas: array overflow in megasas_dump_frame()
  scsi: snic: switch to pci_irq_alloc_vectors
  scsi: megaraid_sas: driver version upgrade
  scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2
  scsi: megaraid_sas: Indentation and smatch warning fixes
  scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints
  scsi: megaraid_sas: Increase internal command pool
  scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete
  scsi: megaraid_sas: Bail out the driver load if ld_list_query fails
  scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void
  scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR
  scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool
  scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion
  scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero
  scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate
  scsi: megaraid_sas: update can_queue only if the new value is less
  scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions
  scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID
  scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD
  ...
2017-02-21 11:51:42 -08:00
Wei Yongjun 8b9b22ba75 scsi: qedi: Fix possible memory leak in qedi_iscsi_update_conn()
'conn_info' is malloced in qedi_iscsi_update_conn() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.

Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-09 18:35:00 -05:00
Christoph Hellwig b6a05c823f scsi: remove eh_timed_out methods in the transport template
Instead define the timeout behavior purely based on the host_template
eh_timed_out method and wire up the existing transport implementations
in the host templates.  This also clears up the confusion that the
transport template method overrides the host template one, so some
drivers have to re-override the transport template one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-06 19:10:03 -05:00
Colin Ian King 703e747a6b scsi: qedi: return via va_end to match corresponding va_start
Although on most systems va_end is a no-op, it is good practice to use
va_end on the function return path, especially since the va_start
documenation states:

  "Each invocation of va_start() must be matched by a corresponding
   invocation of va_end() in the same function."

Found with static analysis by CoverityScan, CIDs 1389477-1389479

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-05 00:31:13 -05:00
James Bottomley db27edf80c Merge remote-tracking branch 'mkp-scsi/4.10/scsi-fixes' into fixes 2016-12-26 20:32:48 -08:00
Thomas Gleixner a98d1a0ca6 scsi: qedi: Convert to hotplug state machine
The CPU hotplug code is a trainwreck. It leaks a notifier in case of driver
registration error and the per cpu loop is racy against cpu hotplug. Aside
of that the driver should have been written and merged with the new state
machine interfaces in the first place.

Mop up the mess and Convert it to the hotplug state machine.

Signed-off-by: Thomas Grumpy Gleixner <tglx@linutronix.de>
Cc: Nilesh Javali <nilesh.javali@cavium.com>
Cc: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Cc: Chad Dupuis <chad.dupuis@cavium.com>
Cc: Saurav Kashyap <saurav.kashyap@cavium.com>
Cc: Arun Easi <arun.easi@cavium.com>
Cc: Manish Rangankar <manish.rangankar@cavium.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2016-12-25 10:47:18 +01:00
Randy Dunlap 7961d53d22 scsi: qedi: fix build, depends on UIO
Fix build of SCSI qedi driver. It uses uio interfaces so it should
depend on UIO.

ERROR: "uio_unregister_device" [drivers/scsi/qedi/qedi.ko] undefined!
ERROR: "uio_event_notify" [drivers/scsi/qedi/qedi.ko] undefined!
ERROR: "__uio_register_device" [drivers/scsi/qedi/qedi.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-20 17:49:34 -05:00
Manish Rangankar ace7f46ba5 scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.
The QLogic FastLinQ Driver for iSCSI (qedi) is the iSCSI specific module
for 41000 Series Converged Network Adapters by QLogic.

This patch consists of following changes:

  - MAINTAINERS Makefile and Kconfig changes for qedi,
  - PCI driver registration,
  - iSCSI host level initialization,
  - Debugfs and log level infrastructure.

The following indiviual changes are merged into this commit:

  qedi: Add LL2 iSCSI interface for offload iSCSI.
  qedi: Add support for iSCSI session management.
  qedi: Add support for data path.

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com>
Signed-off-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14 14:56:28 -05:00