Loading firmware is a rather complicated process, in the end we add a
dependency between the pm mutex and the mm semaphore which results in
a harmless but annoying error message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Leave that at the values set during init. No need to update
them repeatedly.
Signed-off-by: monk.liu <monk.liu@amd.com>
Signed-off-by: David Zhang <david1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
bo_va may un-initialized, fix it.
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
Need to take the lock when accessing this.
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
call reservation_object_reserve_shared before amdgpu_bo_fence
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
Pass a ttm_placement pointer to amdgpu_bo_create_restricted
add min_offset to amdgpu_bo_pin_restricted. This makes it
easier to allocate memory with address restrictions. With
this patch we can also enable 2-ended allocation again.
v2: fix rebase conflicts
v3: memset placements before using
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The structure is renamed and moved to amd_shared.h to make
the component independent. This makes it easier to add
new components in the future.
v2: fix include path
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: yanyang1 <young.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's causing issues with VMID handling and comparing the
fence value two times actually doesn't make handling faster.
Port of radeon commit "d6d5c5b8364bcc4d52cddc68bcb0a330d2af20f3".
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Enable UVD dpm (dynamic power management) and powergating. UVD dpm dynamically scales the UVD
clocks on demand. Powergating turns off the power to the block when it's not in use.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
VCE 3.0 has two indentical instances in the engine, they share
the same registers name in differrent memory block distinguished
by the grbm_gfx_index, we set to master instance after init, it
will dispatch task to slave instance. These two instances will
share the same firmware, but have their own stacks and heaps.
v2: add mutex for using grbm_gfx_index
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Firmware required BO size changes in terms of ASIC family
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Deny user and kernel mapping if we said we never want to do so.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Retry the dpcd fetch several times. Some eDP panels
fail several times before the fetch is successful.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73530
Ported from radeon.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use %*ph rather than walking the array.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly protect the state and also handle submission failures.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Otherwise a process can access the GDS data of another process.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
The CE preamble IB can be dropped for the same context
v2: use the flags directly
v3: remove 'CE' for potential preamble usage by other rings
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
check the filp is not robust, and sometimes different contexts may
have same filp value.
v2: check both filp and ctx_id
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
It is required to support fence per context.
v2: add amdgpu_ctx_get/put
v3: improve get/put
v4: squash hlock fix
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Set up the CP and SDMA for proper unaligned memory access.
Required for OpenCL 2.x
v2: udpate commit message
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
The existing locks were protecting the list, but not the elements.
v2: rename hlock to lock
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
If ctx was released between put and get, then "get" would crash.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
sg could point to array of contigiouse page*, only free page could lead
to memory leak.
v2: use iterator
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This flag isn't used by user mode drivers, remove it to avoid
confusion. And rename GTT_WC to GTT_USWC to make it clear.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Avoids possibility that info may leak via the uninitialized
_pad element.
Noticed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to unlock the mutex on error.
Noticed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this could prevent mis-understanding, because libdrm side will consider
no bo_list created if handleis zero
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Still need to handle ibs BO and validate them even bo_list is NULL
Signed-off-by: Monk.Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_bo_create() calls amdgpu_ttm_placement_from_domain()
before ttm_bo_init() is called. amdgpu_ttm_placement_from_domain()
uses the ttm bo size to determine when to select top down
allocation but since the ttm bo is not initialized yet the
check is always false. It only took affect when buffers
were validated later. It also seemed to regress suspend
and resume on some systems possibly due to it not
taking affect in amdgpu_bo_create().
amdgpu_bo_create() and amdgpu_ttm_placement_from_domain()
need to be reworked substantially for this to be optimally
effective. Re-enable it at that point.
Ported from radeon commit:
a239118a24
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This adds initial support for VI asics. This
includes Iceland, Tonga, and Carrizo. Our inital
focus as been Carrizo, so there are still gaps in
support for Tonga and Iceland, notably power
management.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for CIK parts. These parts
are also supported by radeon which is the preferred
option, so there is a config option to enable support
for CIK parts in amdgpu for testing.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use readb() and memcpy_fromio() accessors instead.
Ported from radeon commit:
f2c9e560b4
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds the non-asic specific core driver code.
v2: remove extra kconfig option
v3: implement minor fixes from Fengguang Wu
v4: fix cast in amdgpu_ucode.c
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the main header file for amdgpu.
v2: remove stable comments
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This header defines asic families and attributes.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This header provides the smc message interface for the driver.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This header provides for format for the GCA blocks
clear state (i.e., default state). Each GCA version
has a specific clear state.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These headers define the atombios table structure and
driver interface.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the VCE (Video Codec Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the VCE (Video Codec Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the UVD (Universal Video Decoder)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the UVD (Universal Video Decoder)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the UVD (Universal Video Decoder)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the SMU (System Management Unit)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the OSS (OS Services)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the GMC (Graphics Memory Controller)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the GCA (Graphics and Compute Array)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the GCA (Graphics and Compute Array)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the GCA (Graphics and Compute Array)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the DCE (Display and Composition Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the DCE (Display and Composition Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the DCE (Display and Composition Engine)
block on the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are register headers for the BIF (Bus InterFace) block on
the GPU.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a bug where the number of watch points
was shown before it was actually calculated
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit makes sure that on process termination, after
we're destroying all the active queues, we're killing all the
existing wave front of the current process.
By doing this we're making sure that if any of the CUs were blocked
by infinite loop we're enforcing it to end the shader explicitly.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds three new interfaces to kfd2kgd interface file of radeon.
The interfaces are:
- Check if a specific VMID has a valid PASID mapping
- Retrieve the PASID which is mapped to a specific VMID
- Issue a VMID invalidation request to the ATC
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
v2:
- rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
- change void* to uint64_t inside ioctl arguments
- use kmalloc instead of kzalloc because we use copy_from_user
immediately after it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
v2:
- rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
- change void* to uint64_t inside ioctl arguments
- use kmalloc instead of kzalloc because we use copy_from_user
immediately after it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The address watch operation gives the ability to specify watch points
which will generate a shader breakpoint, based on a specified single
address or range of addresses.
There is support for read/write/any access modes.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The wave control operation supports several command types executed upon
existing wave fronts that belong to the currently debugged process.
The available commands are:
HALT - Freeze wave front(s) execution
RESUME - Resume freezed wave front(s) execution
KILL - Kill existing wave front(s)
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the skeleton H/W debugger module support. This code
enables registration and unregistration of a single HSA process at a
time.
The module saves the process's pasid and use it to verify that only the
registered process is allowed to execute debugger operations through the
kernel driver.
v2: rename get_dbgmgr_mutex to kfd_get_dbgmgr_mutex to namespace it
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds support for static user-mode queues in QCM.
Queues which are designated as static can NOT be preempted by
the CP microcode when it is executing its scheduling algorithm.
This is needed for supporting the debugger feature, because we
can't allow the CP to preempt queues which are currently being debugged.
The number of queues that can be designated as static is limited by the
number of HQDs (Hardware Queue Descriptors).
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W
debugger functionality to the userspace.
The IOCTLs are:
- AMDKFD_IOC_DBG_REGISTER:
The purpose of this IOCTL is to notify amdkfd that a process wants to use
GPU debugging facilities on itself only.
It is expected that this IOCTL would be called before any other H/W
debugger requests are sent to amdkfd and for each GPU where the H/W
debugging needs to be enabled. The use of this IOCTL ensures that only
one instance of a debugger is active in the system.
- AMDKFD_IOC_DBG_UNREGISTER:
This IOCTL detaches the debugger/debugged process from the H/W
Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL.
- AMDKFD_IOC_DBG_ADDRESS_WATCH:
This IOCTL allows to set different watchpoints with various conditions as
indicated by the IOCTL's arguments. The available number of watchpoints
is retrieved from topology. This operation is confined to the current
debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER.
- AMDKFD_IOC_DBG_WAVE_CONTROL:
This IOCTL allows to control a wavefront as indicated by the IOCTL's
arguments. For example, you can halt/resume or kill either a
single wavefront or a set of wavefronts. This operation is confined to
the current debugged process, which was registered through
AMDKFD_IOC_DBG_REGISTER.
Because the arguments for the address watch IOCTL and wave control IOCTL
are dynamic, meaning that they could vary in size, the userspace passes a
pointer to a structure (in userspace) that contains the value of the
arguments. The kernel driver is responsible to parse this structure and
validate its contents.
v2: change void* to uint64_t inside ioctl arguments
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds new interface functions to the kfd2kgd interface file. The
new functions allow to perform H/W debugger operations by writing to GPU
registers.
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Use the generic mechanism to declare a bitmap instead of unsigned long.
It seems that "struct kfd_process.allocated_queue_bitmap" is unused.
Maybe it could be deleted instead.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVWh3TAAoJEHm+PkMAQRiG/kwH/2c9irodp2+M9OUnX2bfsBb6
LnChiDpvkF5BB8jhP6d/XmvPp4NJzAbTxByhjdfb2E2HkorCUHCOIn2tI1TE2pUs
2qjkOVH+XCzoV0goGtQjzK1ht8f2IrtlDiEjyRekK5cJHzhggb22QPtWL4npyd0O
reDmG2jsRaF9POr9uLSFEv4CEnkksmRLUU0vuQX0TZeCJ41O7TXrkN/wKrLZ5mj4
IWpqXQaSlrffq/T5HnVbXBxk3/T8QmhrIoppiMpV1mUVj0uTqlFRNi5qwT2Nit1h
FVljWI4+WgOk3bf7fUlp+ahopjkTgu+GuXkiRP/pdgWNQO0cxCWSAzSndAlIIAE=
=uOoJ
-----END PGP SIGNATURE-----
Backmerge v4.1-rc4 into into drm-next
We picked up a silent conflict in amdkfd with drm-fixes and drm-next,
backmerge v4.1-rc5 and fix the conflicts
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/drm_irq.c
This patch adds a new kernel module parameter to amdkfd,
called send_sigterm.
This parameter specifies whether amdkfd should send the
SIGTERM signal to an HSA process, when the following conditions
occur:
1. The GPU triggers an exception regarding a kernel that was
issued by this process.
2. The HSA process isn't waiting on an event that handles
this exception.
The default behavior is not to send a SIGTERM and suffice
with a dmesg error print.
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds Peripheral Page Request (PPR) failure processing
and reporting.
Bad address or pointer to a system memory block with inappropriate
read/write permission cause such PPR failure during a user queue
processing. PPR request handling is done by IOMMU driver notifying
AMDKFD module on PPR failure.
The process triggering a PPR failure will be notified by
appropriate event or SIGTERM signal will be sent to it.
v3:
- Change all bool fields in struct kfd_memory_exception_failure to
uint32_t
Signed-off-by: Alexey Skidanov <alexey.skidanov@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).
The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.
The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.
v2:
Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap
v3:
Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
- AMDKFD_IOC_CREATE_EVENT:
Creates a new event of a specified type
- AMDKFD_IOC_DESTROY_EVENT:
Destroys an existing event
- AMDKFD_IOC_SET_EVENT:
Signal an existing event
- AMDKFD_IOC_RESET_EVENT:
Reset an existing event
- AMDKFD_IOC_WAIT_EVENTS:
Wait on event(s) until they are signaled
v2:
- Move the limit of the signal events to kfd_ioctl.h so it
can be used by userspace
v3:
- Change all bool fields in struct kfd_memory_exception_failure
to uint32_t
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.
The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.
There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.
The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.
However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.
The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch creates a new structure for asic specific operations, instead
of using the existing structure of operations.
This is done to make the code flow more logic, readable and maintainable.
The change is done only to the device queue manager module at this point.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
kmalloc() returns a void pointer - no need to cast it in
drivers/gpu/drm/amd/amdkfd/kfd_process.c::kfd_process_destroy_delayed()
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a bug where sdma vm wasn't initialized when
an sdma queue was created in HWS mode.
This caused GPUVM faults to appear on dmesg and it is one of the
causes that SDMA queues are not working.
Signed-off-by: Xihan Zhang <xihan.zhang@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.comt>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch sets the local memory size that is reported to userspace to 0.
This is done to make sure that userspace won't try to allocate local memory
for HSA.
As long as amdkfd doesn't support allocating local memory for HSA,
we need this patch.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes we might unregister process that have queues, because we couldn't
preempt the queues. Until now we blocked it with BUG_ON but instead just
print it as debug.
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This backmerges 4.0-rc6 due to the recent fixes in rc5/6
- DP link rate refactoring from Ville
- byt/bsw rps tuning from Chris
- kerneldoc for the shrinker code
- more dynamic ppgtt pte work (Michel, Ben, ...)
- vlv dpll code refactoring to prep fro bxt (Imre)
- refactoring the sprite colorkey code (Ville)
- rotated ggtt view support from Tvrtko
- roll out struct drm_atomic_state to prep for atomic update (Ander)
* tag 'drm-intel-next-2015-03-27-merge' of git://anongit.freedesktop.org/drm-intel: (473 commits)
Linux 4.0-rc6
arm64: juno: Fix misleading name of UART reference clock
drm/i915: Update DRIVER_DATE to 20150327
drm/i915: Skip allocating shadow batch for 0-length batches
drm/i915: Handle error to get connector state when staging config
drm/i915: Compare GGTT view structs instead of types
drm/i915: fix simple_return.cocci warnings
drm/i915: Add module param to test the load detect code
drm/i915: Remove usage of encoder->new_crtc from clock computations
drm/i915: Don't look at staged config crtc when changing DRRS state
drm/i915: Convert intel_pipe_will_have_type() to using atomic state
drm/i915: Pass an atomic state to modeset_global_resources() functions
drm/i915: Add dynamic page trace events
drm/i915: Finish gen6/7 dynamic page table allocation
drm/i915: Remove unnecessary gen6_ppgtt_unmap_pages
drm/i915: Fix i915_dma_map_single positive error code
drm/i915: Prevent out of range pt in gen6_for_each_pde
drm/i915: fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl
drm/i915: Rip out GET_SPRITE_COLORKEY ioctl
watchdog: imgpdc: Fix default heartbeat
...
The current code can only support one kgd instance. We have to
support multiple kgd instances in one system. i.e two amdgpu or two
radeon or one amdgpu + one radeon or more than two kgd instances.
Signed-off-by: Xihan Zhang <xihan.zhang@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Convert the timestamping in the amdkfd driver to use a timespec64 and 64bit
time accessors.
Although the existing code is completely safe beyond y2038 because it deals
with monotonic time, this patch is still needed in order to kill off all uses
of struct timespec.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
fence_wait_timeout() is an exported kernel symbol, so we should rename our
local function to something different.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the SDMA queue initialization, when running in non-HWS mode.
The first fix is to move the initialization of SDMA VM parameters before the
initialization of the SDMA MQD.
The second fix is to load the MQD to an HQD after the initialization of the MQD.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a missing destruction of mqd, when destroying a kernel queue.
Without the destruction, there is a memory leakage when repeatedly creating and
destroying kernel queues.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
get_pipes_num() calls BUG_ON so we can't set it as inline because it produces a
warning as BUG_ON() uses static variables when it is expanded.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a bug in the initialization of the pipelines. The
init_pipelines() function was called with a constant value of 0 in the
first_pipe argument. This is an error because amdkfd doesn't handle pipe 0.
The correct way is to pass the value that get_first_pipe() returns as the
argument for first_pipe.
This bug appeared in 3.19 (first version with amdkfd) and it causes around 15%
drop in CPU performance of Kaveri (A10-7850).
v2: Don't set get_first_pipe() as inline because it calls BUG_ON()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Pull drm updates from Dave Airlie:
"This is the main drm pull, it has a shared branch with some alsa
crossover but everything should be acked by relevant people.
New drivers:
- ATMEL HLCDC driver
- designware HDMI core support (used in multiple SoCs).
core:
- lots more atomic modesetting work, properties and atomic ioctl
(hidden under option)
- bridge rework allows support for Samsung exynos chromebooks to
work finally.
- some more panels supported
i915:
- atomic plane update support
- DSI uses shared DSI infrastructure
- Skylake basic support is all merged now
- component framework used for i915/snd-hda interactions
- write-combine cpu memory mappings
- engine init code refactored
- full ppgtt enabled where execlists are enabled.
- cherryview rps/gpu turbo and pipe CRC support.
radeon:
- indirect draw support for evergreen/cayman
- SMC and manual fan control for SI/CI
- Displayport audio support
amdkfd:
- SDMA usermode queue support
- replace suballocator usage with more suitable one
- rework for allowing interfacing to more than radeon
nouveau:
- major renaming in prep for later splitting work
- merge arm platform driver into nouveau
- GK20A reclocking support
msm:
- conversion to atomic modesetting
- YUV support for mdp4/5
- eDP support
- hw cursor for mdp5
tegra:
- conversion to atomic modesetting
- better suspend/resume support for child devices
rcar-du:
- interlaced support
imx:
- move to using dw_hdmi shared support
- mode_fixup support
sti:
- DVO support
- HDMI infoframe support
exynos:
- refactoring and cleanup, removed lots of internal unnecessary
abstraction
- exynos7 DECON display controller support
Along with the usual bunch of fixes, cleanups etc"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
drm/radeon: fix voltage setup on hawaii
drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
drm/radeon: only enable kv/kb dpm interrupts once v3
drm/radeon: workaround for CP HW bug on CIK
drm/radeon: Don't try to enable write-combining without PAT
drm/radeon: use 0-255 rather than 0-100 for pwm fan range
drm/i915: Clamp efficient frequency to valid range
drm/i915: Really ignore long HPD pulses on eDP
drm/exynos: Add DECON driver
drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
drm/i915: Insert a command barrier on BLT/BSD cache flushes
drm/i915: Drop vblank wait from intel_dp_link_down
drm/exynos: fix NULL pointer reference
drm/exynos: remove exynos_plane_dpms
drm/exynos: remove mode property of exynos crtc
drm/exynos: Remove exynos_plane_dpms() call with no effect
drm/i915: Squelch overzealous uncore reset WARN_ON
drm/i915: Take runtime pm reference on hangcheck_info
drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
...
This patch changes a BUG_ON() statement to pr_debug, in case the user tries to
update a non-existing queue.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a bug where the first_pipe index passed into init_pipelines()
was a #define instead of the value that is passed into amdkfd by radeon
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes a bug when calling to init_pipeline() interface.
The index that was passed to that function didn't take into account the
first_pipe value, which represents the first pipe index that is under amdkfd's
responsibility.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
CP microcode uses undocumented bits in this register to record queue
state information. The KFD zeroes these bits in update_mqd, when invoked
through the UPDATE_QUEUE ioctl, causing incoherent state when the ioctl
is used to successively unmap and map a queue.
Since the queue type cannot be changed in this path, move the MQD write
to init_mqd.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
dqm->queue_count tracks queues in the active state only. In a few
places this count is modified unconditionally, leading to an incorrect
value when the UPDATE_QUEUE ioctl is used to make a queue inactive.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This backmerges drm-fixes into drm-next mainly for the amdkfd
stuff, I'm not 100% confident, but it builds and the amdkfd
folks can fix anything up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
This patch handles a case where amdkfd tries to destroy a queue but the queue
type is invalid.
This case occurs in non-HWS path.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Backmerge Linus tree after rc5 + drm-fixes went in.
There were a few amdkfd conflicts I wanted to avoid,
and Ben requested this for nouveau also.
Conflicts:
drivers/gpu/drm/amd/amdkfd/Makefile
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_priv.h
drivers/gpu/drm/amd/include/kgd_kfd_interface.h
drivers/gpu/drm/i915/intel_runtime_pm.c
drivers/gpu/drm/radeon/radeon_kfd.c
This patch replaces the two current amdkfd module parameters with a new one.
The current parameters that are being replaced are:
- Maximum number of HSA processes
- Maximum number of queues per process
The new parameter that replaces them is called "Maximum queues per device"
This replacement achieves two goals:
- Allows the user to have as many HSA processes as it wants (until
a maximum of 512 HSA processes in Kaveri).
- Removes the limitation the user had on maximum number of queues per HSA
process. E.g. the user can now have processes which only have one queue and
other processes which have hundreds of queues, while before the user
couldn't have more than 128 queues per process (as default).
The default value of the new parameter is 4096 (32 * 128, which were the
defaults of the old parameters). There is almost no additional GART memory
required for the default case. As a reminder, this amount of queues requires a
little bit below 4MB of GART memory.
v2:
In addition, This patch defines a new counter for queues accounting in the DQM
structure. This is done because the current counter only counts active queues
which allows the user to create more queues than the
max_num_of_queues_per_device module parameter allows.
However, we need the current counter for the runlist packet build process, so
the solution is to have a dedicated counter for this accounting.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
If the first queue created was failed on DQM then PQM should
unregister the process from DQM.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch completely removes the sync_with_hw() because it was broken and
actually there is no point of using it.
This function was used to:
- Make sure that the submitted packet to the HIQ (which is a kernel queue) was
read by the CP. However, it was discovered that the method this function used
to do that (checking wptr == rptr) is not consistent with how the actual CP
firmware works in all cases.
- Make sure that the queue is empty before issuing the next packet. To achieve
that, the function blocked amdkfd from continuing until the recently
submitted packet was consumed. However, the acquire_packet_buffer() already
checks if there is enough room for a new packet so calling sync_with_hw() is
redundant.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
In order not to occupy the current core and thus prevent the core from
servicing IOMMU PPR requests, this patch replaces the call in DQM to
cpu_relax() with a call to schedule().
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a minor bug in allocate_hqd(), where the loop run from the
next-to-allocate pipe until the number of pipes.
This is wrong because we need to consider the possibility where
next-to-allocate pipe is not 0, and thus, the for-loop only checks part of the
pipes and doesn't wrap-around, as it supposed to do.
Therefore, we add another counting variable to make sure we go over all the
pipes, regardless of where we start to look at the first iteration of the loop.
This bug only affected non-HWS mode. In HWS mode, the CP fw is responsible for
allocating the HQD.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
The work queue couldn't reliably prevent the SW ring buffer from
overflowing, so dmesg was spammed by
kfd kfd: Interrupt ring overflow, dropping interrupt.
messages when running e.g. the Atlantis Substance demo from
https://wiki.unrealengine.com/Linux_Demos on Kaveri.
Since the SW ring buffer doesn't actually do anything at this point, just
remove it for now. When actual interrupt processing code is added to
amdkfd, it should try to do things immediately and only defer to work
queues when necessary.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch changes kfd_ioctl() to be very similar to drm_ioctl().
The patch defines an array of amdkfd_ioctls, which maps IOCTL definition to the
ioctl function.
The kfd_ioctl() uses that mapping to call the appropriate ioctl function,
through a function pointer.
This patch also declares a new typedef for the ioctl function pointer.
v2: Renamed KFD_COMMAND_(START|END) to AMDKFD_...
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
This patch reformats the ioctl definitions in kfd_ioctl.h to be similar to the
drm ioctls definition style.
v2: Renamed KFD_COMMAND_(START|END) to AMDKFD_...
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
This patch moves the copy_to_user() and copy_from_user() calls from the
different ioctl functions in amdkfd to the general kfd_ioctl() function, as
this is a common code for all ioctls.
This was done according to example taken from drm_ioctl.c
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This patch fixes a bug where deallocate_vmid() didn't actually unmap the
VMID<-->PASID mapping (in the registers).
That can cause undefined behavior.
This bug only occurs in non-HWS mode.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a bug in DQM, where the MQD of a newly created compute queue
is not loaded to an HQD slot. As a result, the CP never reads packets from this
queue.
This bug happens only in non-HWS (hardware scheduling) mode. In HWS mode, the
CP is responsible of loading MQDs to HQDs slots.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Commit "amdkfd: use sizeof(long) granularity for the pasid bitmask" calculated
the number of longs it will need, but ended up allocating that number of
bytes rather than longs.
Fix that silly error and allocate the amount of data really required.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Original code sent always 0 as the index number of the node. This patch fixes
this bug by sending a variable which is incremented per node.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a device QCM bug, where the number of queues were not
counted correctly for the operation of update queue. The count was incorrect
as there was no regard to the previous state of the queue.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch starts to add support for the VI APU in the KQ (kernel queue)
module.
Because most (more than 90%) of the KQ code is shared among AMD's APUs, we
chose a design that performs most/all the code in the shared KQ file
(kfd_kernel_queue.c). If there is H/W specific code to be executed,
than it is written in an asic-specific extension function for that H/W.
That asic-specific extension function is called from the shared function at the
appropriate time. This requires that for every asic-specific extension function
that is implemented in a specific ASIC, there will be an equivalent
implementation in ALL ASICs, even if those implementations are just stubs.
That way we achieve:
- Maintainability: by having one copy of most of the code, we only need to
fix bugs at one locations
- Readability: very clear what is the shared code and what is done per ASIC
- Extensibility: very easy to add new H/W specific files/functions
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch does some re-org on the kernel_queue structure. It takes out
all the function pointers from the structure and puts them in a new structure,
called kernel_queue_ops. Then, it puts an instance of that structure
inside kernel_queue.
This re-org is done to prepare the KQ module to support more than one AMD APU
(Kaveri).
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch starts to add support for the VI APU in the DQM module.
Because most (more than 90%) of the DQM code is shared among AMD's APUs, we
chose a design that performs most/all the code in the shared DQM file
(kfd_device_queue_manager.c). If there is H/W specific code to be executed,
than it is written in an asic-specific extension function for that H/W.
That asic-specific extension function is called from the shared function at the
appropriate time. This requires that for every asic-specific extension function
that is implemented in a specific ASIC, there will be an equivalent
implementation in ALL ASICs, even if those implementations are just stubs.
That way we achieve:
- Maintainability: by having one copy of most of the code, we only need to
fix bugs at one locations
- Readability: very clear what is the shared code and what is done per ASIC
- Extensibility: very easy to add new H/W specific files/functions
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch does some re-org on the device_queue_manager structure. It takes out
all the function pointers from the structure and puts them in a new structure,
called device_queue_manager_ops. Then, it puts an instance of that structure
inside device_queue_manager.
This re-org is done to prepare the DQM module to support more than one AMD APU
(Kaveri).
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Instead of creating a BUG if trying to free a NULL GART sub-allocation object,
just return 0 (success).
This is done to mirror behavior of kfree.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Since the user space may call open() more that once from the same process,
the aperture initialization should be moved from kfd_open()
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch displays the firmware version of the microcode that is currently
running in the MEC.
This is needed for the HSA RT, so it could differentiate its behavior based on
fw version. e.g. workarounds for bugs in fw
v2: Send the KGD_ENGINE_MEC1 as a parameter to the get_fw_version()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new interface to the kfd-->kgd interface.
The new interface function retrieves the firmware version that is currently in
use by the MEC engine. The firmware was uploaded to the MEC engine by the kgd
(radeon).
v2: Added parameter of engine type to interface function
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch checks if the process that opens the /dev/kfd device is 32-bit
process. If so, it returns -EPERM and prints a warning message in dmesg.
This is done to prevent 32-bit user processes from using amdkfd, and hence, HSA
features.
AMD's HSA userspace stack will also support only 64-bit processes on Linux.
Reviewed-by: Alexey Skidanov <alexey.skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
In function acquire_packet_buffer() we may return -ENOMEM. In that case, we
should set the *buffer_ptr to NULL, so that calling functions which check the
*buffer_ptr value as a criteria for success, will know that
acquire_packet_buffer() failed.
Reviewed-by: Alexey Skidanov <alexey.skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
srcu callbacks are running in atomic context, we can't allocate using
__GFP_WAIT.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
All the bit operations (such as find_first_zero_bit()) read sizeof(long) bytes
at a time. If we allocated less than sizeof(long) bytes for the bitmask we
would be accessing invalid memory when working with the bitmask.
Change the allocator to allocate sizeof(long) multiples for the bitmask.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This is dead code. We don't need to unbind here, we can just return
directly.
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The mqds array members are not freed when dqm is uninitialized.
Reviewed-by: Ben Goz <Ben.Goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The call to kernel_queue_uninit(NULL) will trigger a BUG(), and also the
error code is incorrect.
Fixes: 45102048f7 ('amdkfd: Add process queue manager module')
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
There is a typo here so the errors from kfd_bind_process_to_device()
are not detected.
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch removes the dependency of amdkfd upon DRM_AMDGPU symbol in amdkfd's
Kconfig file.
This is done because amdgpu driver is not yet upstreamed and therefore,
DRM_AMDGPU symbol is not present in any Kconfig file.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch fixes a compilation error when using certain configuration by
including the file io.h in kfd_doorbell.c
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
amdkfd uses cpu_relax() in its sync_with_hw() function. Because cpu_relax() is
defined as 'REP; NOP' on x86_64, it will block the CPU from servicing
IOMMU PPR requests.
This may cause a deadlock, because sync_with_hw() won't be completed
until the PPR request has been served.
Therefore, we need to use schedule() instead of cpu_relax() as it is the
minimum requirement to allow other threads to execute.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
struct device_process_node was allocated during process registration but
not released at process deregistration.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch was done due to sparse warning. It changes the definition of
doorbell_ptr in queue_properties to be with __iomem attribute, so it would
match the type which the doorbell module functions are returning.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch rewrites destroy_queue_nocpsch() as the current logic that is
implemented in the function is completely flawed.
This function is used only in non-HWS mode.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
The MQDs for CI and VI are different. Therefore, the MQD manager module need to
be H/W specific.
This patch splits the current MQD manager into three files:
- kfd_mqd_manager.c, which contains common functions and initializes the
specific mqd manager module according to the H/W
- kfd_mqd_manager_cik.c, which contains Kaveri specific functions. This is
basically the old kfd_mqd_manager.c
- kfd_mqd_manager_vi.c, which will contain VI specific functions. Currently it
is not implemented except for returning NULL on initialization.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new property to kfd_device_info structure. That structure
holds information that is H/W specific.
The new property is called asic_family and its purpose is to distinguish
between different asic families in amdkfd operations, mainly in QCM (queue
control & management)
This patch also adds a new enum, to select different ASICs. We set the current
kfd_device_info instance as Kaveri and create a new instance which describes
the new AMD APU, codenamed 'Carrizo'.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
As the MQD types are common across all AMD GPUs/APUs, let's remove the CIK part
from the name.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds new fields to the queue_properties structure. The new fields
are relevant only for queues running on AMD GPU VI architecture.
The eop_ring_buffer_address and eop_ring_buffer_size describe an
end-of-pipe queue which is assigned to the MQD. In CI, the EOP queue was per
pipeline and in VI it is per queue.
The ctx_save_restore_area_address and ctx_save_restore_area_size describe a
memory area that is designated to allow the CP to do context save/restore in
mid-wave state.
This patch also modifies the set_queue_properties_from_user() (called from
kfd_ioctl_create_queue()) to check and copy those new parameters.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Because amdkfd will need to work both with radeon and amdgpu, don't include
header files that are in radeon's folder.
Instead, use the common amd include folder and move amdkfd specific defines to
amdkfd header files.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch creates a new file, cik_structs.h, and puts the cik_mqd and
cik_sdma_rlc_registers structures in that file.
The new file is placed in a common include folder under the drm/amd folder, so
it will be shared among all amd drm drivers.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes a call to kfd-->kgd interface function that is doing H/W
initialization. That function is moved into radeon to be part of the common
H/W initialization sequence. The interface function will be deleted.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves to radeon the initialization of compute vmid.
That initializations was done in kfd-->kgd interface, but doing it in radeon
as part of radeon's H/W initialization routines is more appropriate.
In addition, this simplifies the kfd-->kgd interface.
The patch removes the function from the interface file and from the interface
declaration file.
The function initializes memory apertures to fixed base/limit address and non
cached memory types.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch change the calls throughout the amdkfd driver from the old kfd-->kgd
interface to the new kfd gtt sa inside amdkfd
v2: change the new call in sdma code that appeared because of the sdma feature
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch changes the calls to allocate the gart memory for amdkfd from the
old interface (radeon_sa) to the new one (kfd_gtt_sa)
The new gart sub-allocator is initialized with chunk size equal to 512 bytes.
This is because the KV MQD is 512 Bytes and most of the sub-allocations are
MQDs.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch makes the gart's buffer size calculation more accurate. This buffer
is needed per GPU.
It takes into account maximum number of MQDs, runlist packets, kernel queues
and reserves 512KB for other misc allocations.
The total size is just shy of 4MB, for 32 processes and 128 queues per
process, which are the defaults for amdkfd kernel module parameters.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds new kfd gtt sub-allocator functions that service the amdkfd
driver when it wants to use gtt memory.
The sub-allocator uses a bitmap to handle the memory area that was transferred
to it during init. It divides the memory area into chunks, according to chunk
size parameter.
The allocation function will allocate contiguous chunks from that memory area,
according to the requested size. If the requested size is smaller than the
chunk size, a single chunk will be allocated.
v2: Do some more verifications on parameters that are passed into
kfd_gtt_sa_init()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds new fields to kfd_dev struct that are necessary for the new kfd
gtt sa module
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds two new functions to the kfd-->kgd interface:
init_gtt_mem_allocation, which allocate a large enough buffer on the amdkfd
needs, such as mqds, hpds, kernel queue, fence and runlists. This function
is only called once per GPU device. The size of the allocated buffer is
based on the maximum number of HSA processes and maximum number of queues
per HSA process (two amdkfd kernel module parameters).
free_gtt_mem, which frees a buffer that was allocated on the gart aperture.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch passes the correct queue type to pqm_create_queue() instead of a
fixed KFD_QUEUE_TYPE_COMPUTE type.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a check to the create queue ioctl path, which identifies SDMA
queue type that is sent by userspace.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for SDMA user-mode queues to the QCM - the Queue
management system that manages queues-per-device and queues-per-process.
v2: Remove calls to interface function that initializes sdma engines.
v3: Use the new names of some of the defines.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for SDMA mqd operations:
- init_mqd_sdma
- uninit_mqd_sdma
- load_mqd_sdma
- update_mqd_sdma
- destroy_mqd_sdma
- is_occupied_sdma
It also adds SDMA queue information to some private structures of amdkfd.
v3: Use the new names of some of the defines.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds three new functions to the kfd2kgd interface:
- hqd_sdma_load() - Loads SDMA mqd to a H/W SDMA hqd slot. Used only in no HWS
mode.
- hqd_sdma_is_occupied() - Checks if an SDMA hqd slot is occupied. Used only
in no HWS mode.
- hqd_sdma_destroy() - Destructs and preempts the SDMA queue assigned to
that SDMA hqd slot. Used only in no HWS mode.
These functions are needed to support SDMA queues scheduling when using no HWS
mode (used for debug or bring-up).
v2: Removed init_sdma_engines() from interface. Initialization is done in
radeon.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch splits the current kfd_get_process_device_data() to two
functions, one that specifically creates a pdd and another one which
just do lookup.
This is done to enhance the readability and maintainability of the code.
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the number of watch points to the node capabilities in the
topology module
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
v3: Removed the use of internal typedefs, fixed debug prints, added checks
for parameters and moved to using doorbell address from user
v4: Extracted some of the code in the create queue ioctl to a different
function that may be also called from other ioctls in the future.
Also fixed the check of the ring size argument.
v5:
Add support for AQL queues creation to enable working with open-source HSA
runtime
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the interrupt handling module, in kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.
The amdkfd interrupt module maintains an internal interrupt ring per amdkfd
device. The internal interrupt ring contains interrupts that needs further
handling. The extra handling is deferred to a later time through a workqueue.
There's no acknowledgment for the interrupts we use. The hardware simply queues
a new interrupt each time without waiting.
The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.
v3:
Move amdkfd from drm/radeon/ to drm/amd/
Change device init
Made sure spin lock is taken only if init is complete
Moved bool field to the end of the structure
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The queue scheduler divides into two sections, one section is process bounded
and the other section is device bounded.
The device bounded section is handled by this module.
The DQM module handles queue setup, update and tear-down from the device side.
It also supports suspend/resume operation.
v3: Changed device_init, added the use of the new gart allocation functions an
Added documentation.
v4:
Fixed a race in DQM queue scheduler where dqm->lock must be held when accessing
dqm->queue_count and dqm->processes_count. This fixes runlist IB allocation
failures when DQM is under load.
Fixed race in DQM queue destruction where queues being destroyed must be
removed from qpd->queues_list prior to preemption, or concurrent queue
creation activity may reschedule them while their MQD is destroyed.
Fixed EOP queue size setting in CP_HPD_EOP_CONTROL, because the size is
specified as (log2(size_dwords)-1). The previous calculation assumed the
size was specified in bytes, which caused interference between EOP queues
when multiple MEC pipelines were active.
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Remove unused unmap_queue function
Various fixes (Style, typos)
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The queue scheduler divides into two sections, one section is process bounded
and the other section is device bounded.
The process bounded section is handled by this module. The PQM handles usermode
queue setup, updates and tear-down.
v3:
Used kernel parameter to limit queues per process instead of define
Added use of doorbell address from user
v4:
Modified pqm_create_queue so that only when creating usermode queues the
driver should return the queue properties to the userspace.
Added an info message print when no more queues can be opened because of the
queue per process limitation
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Various fixes
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The packet manager module builds PM4 packets for the sole use of the CP
scheduler. Those packets are used by the HIQ to submit runlists to the CP.
v3:
Removed include of cik_mqds.h
Changed lower_32/upper_32 calls to use linux macros
Used new gart allocation functions
Added documentation
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Always chain runlist if you have more than 1 process or if you have
over-subscription over the number of queues.
Various fixes (typos, style)
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds a new parameter to the amdkfd driver. This parameter enables
the user to select the scheduling policy of the CP. The choices are:
* CP Scheduling with support for over-subscription
* CP Scheduling without support for over-subscription
* Without CP Scheduling
Note that the third option (Without CP scheduling) is only for debug purposes
and bringup of new H/W. As such, it is _not_ guaranteed to work at all times on
all H/W versions.
v3: Fixed description of parameter, changed the permissions to read_only, added
a verification of the value and added documentation
v5: Set default sched_policy to HWS as it is now supported by firmware
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The kernel queue module enables the amdkfd to establish kernel queues, not
exposed to user space.
The kernel queues are used for HIQ (HSA Interface Queue) and DIQ (Debug
Interface Queue) operations
v3: Removed use of internal typedefs and added use of the new gart allocation
functions
v4: Fixed a miscalculation in kernel queue wrapping
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Add define for kernel queue size
Various fixes
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The mqd_manager module handles MQD data structures.
MQD stands for Memory Queue Descriptor, which is used by the H/W to
keep the usermode queue state in memory.
v3:
Removed new typedefs
Removed pragma pack 4
Remove cik_mqds.h file
Changed lower_32/upper_32 calls to use linux macros
Used new gart allocation functions
Added documentation
v4:
Added missing initialization of the addr field in init_mqd()
Setting the hqd persistent.preload_req bit ON so that when queues switches
on/off, their context will kept and read from the mqd when the cp reassign
them, and thus the dispatched workload context kept consistent without any
interrupts.
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime.
Various fixes
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
The queue module enables allocating and initializing queues uniformly.
v3: Removed typedef and redundant memset call. Broke long pr_debug print to one
liners and Added documentation.
v5: Move amdkfd from drm/radeon/ to drm/amd/
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the functions to bind and unbind pasid
from a device through the amd_iommu driver.
The unbind function is called when the mm_struct of the
process is released.
The bind function is not called here because it is called
only in the IOCTLs which are not yet implemented at this
stage of the patchset.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the process module and three helper modules:
- kfd_process, which handles process which open /dev/kfd
- kfd_doorbell, which provides helper functions for doorbell allocation,
release and mapping to userspace
- kfd_pasid, which provides helper functions for pasid allocation and release
- kfd_aperture, which provides helper functions for managing the LDS, Local GPU
memory and Scratch memory apertures of the process
This patch only contains the basic kfd_process module, which doesn't contain
the reference to the queue scheduler. This was done to allow easier code review.
Also, this patch doesn't contain the calls to the IOMMU driver for binding the
pasid to the device. Again, this was done to allow easier code review
The kfd_process object is created when a process opens /dev/kfd and is closed
when the mm_struct of that process is teared-down.
v3:
Removed kfd_vidmem.c file
Replaced direct mmput call to mmu_notifier release
Removed typedefs
Moved bool field to end of the structure
Added new kernel params for gart usage limitation
Added initialization of sa manager
Fixed debug messages
Remove support for LDS in 32 bit
Changed code to support mmap of doorbell pages from userspace
Added documentation for apertures
v4: Replaced RCU by SRCU for kfd_process list management
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Rename kfd_aperture.c to kfd_flat_memory.c
Protect against multiple init calls
MQD size is H/W dependent so moved it to device info structure
Rename kfd_mem_obj structure's members
Use delayed function for process tear-down
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the topology module to the driver. The topology is exposed to
userspace through the sysfs.
The calls to add and remove a device to/from topology are done by the radeon
driver.
v3:
The CPU information, that is provided in the topology section of the amdkfd
driver, is extracted from the CRAT table. Unlike the CPU information located
in /sys/devices/system/cpu/cpu*, which is extracted from the SRAT table.
While the CPU information provided by the CRAT and the SRAT tables might be
identical, the node topology might be different. The SRAT table contains the
topology of CPU nodes only. The CRAT table contains the topology of CPU and GPU
nodes together (and can be interleaved). For example CPU node 1 in SRAT can be
CPU node 3 in CRAT. Furthermore it's worth to mention that the CRAT table
contains only HSA compatible nodes (nodes which are compliant with the HSA
spec).
To recap, amdkfd exposes a different kind of topology than the one exposed by
/sys/devices/system/cpu/cpu even though it may contain similar information.
v4:
The topology module doesn't support uevent handling and doesn't notify the
userspace about runtime modifications. It is up to the userspace to acquire
snapshots of the topology information created by the amdkfd and exposed
in sysfs.
The following is an example of how the topology looks on a Kaveri A10-7850K
system with amdkfd installed:
/sys/devices/virtual/kfd/kfd/
|
--- topology/
|
|--- generation_id
|--- system_properties
|--- nodes/
|
|--- 0/
|
|--- gpu_id
|--- name
|--- properties
|--- caches/
|
|--- 0/
|
|--- properties
|--- 1/
|
|--- properties
|--- 2/
|
|--- properties
|--- io_links/
|
|--- mem_banks/
|
|--- 0/
|
|--- properties
|--- 1/
|
|--- properties
|--- 2/
|
|--- properties
|--- 3/
|
|--- properties
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Add a check if dev->gpu pointer is null before accessing it in the
node_show function in kfd_topology.c
This situation may occur when amdkfd is loaded and there is a GPU with a CRAT
table, but that GPU isn't supported by amdkfd
Signed-off-by: Evgeny Pinchuk <evgeny.pinchuk@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the amdkfd skeleton driver. The driver does nothing except
define a /dev/kfd device.
It returns -ENODEV on all amdkfd IOCTLs.
v3: Move bool field to the end of structure, removed the pmc ioctls and added
a meaningful error message for ioctl error.
v5:
Create a new folder drm/amd and move amdkfd from drm/radeon/ to drm/amd/
Remove scheduler_class from kfd_priv.h as it was never used
Add skeleton implementation of the Get Version IOCTL
v6:
Update module version to the correct number and remove the "default m" from the
Kconfig file
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the interface between the radeon driver and the amdkfd driver.
The interface implementation is contained in radeon_kfd.c and radeon_kfd.h.
The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside radeon_device structure.
All the register accesses that amdkfd need are done using this interface. This
allows us to avoid direct register accesses in amdkfd proper, while also
avoiding locking between amdkfd and radeon.
The single exception is the doorbells that are used in both of the drivers.
However, because they are located in separate pci bar pages, the danger of
sharing registers between the drivers is minimal.
Having said that, we are planning to move the doorbells as well to radeon.
v3:
Add interface for sa manager init and fini. The init function will allocate a
buffer on system memory and pin it to the GART address space via the radeon sa
manager.
All mappings of buffers to GART address space are done via the radeon sa
manager. The interface of allocate memory will use the radeon sa manager to sub
allocate from the single buffer that was allocated during the init function.
Change lower_32/upper_32 calls to use linux macros
Add documentation for the interface
v4:
Change ptr field type in kgd_mem from uint32_t* to void* to match to type that
is returned by radeon_sa_bo_cpu_addr
v5:
Change format of mqd structure to work with latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime.
Move generic kfd-->kgd interface and other generic kgd definitions to a generic
header file that will be used by AMD's radeon and amdgpu drivers
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
monk.liu