[Why]
dcn30_link_encoder_validate_output_with_stream was a static function.
[How]
remove the static define and include it in the header.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Find out when we try to disable CRC calculation,
crc generation is still enabled. Main reason is
that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.
[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Also, clean up crc window when disable crc calculation.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many VR headsets require a HSYNC width of 4, but DCN
has default minimum of 8.
[How]
Change the arbitrary minimum HSYNC width to 4 to match
DCN20.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
some DP_SEC register defs and masks are missing.
[How]
add the missing defs and masks.
Signed-off-by: Max Tseng <chuan-yu.tseng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a warning that triggers when pstate takes too long.
Pstate can take up to ~200us on Linux without hanging but
it is currently set to 40us.
[How]
Change the timeout for the warning to be 180us on Linux.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CONFIG_DRM_AMD_DC_DCN3_0 is retired. drop it
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's only used when CONFIG_DRM_AMD_DC_DCN is set. Fixes and set but
not used warning.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After refactor our amdgpu_dm_atomic_commit, this function only invoke
drm_atomic_helper_commit. For this reason, this commit drops
amdgpu_dm_atomic_commit and add drm_atomic_helper_commit directly in the
atomic_commit hook.
v2: squash in warning fix (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than in late_init to avoid race conditions between freeing the
buffers and the initial modeset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Scatter/gather is APU feature.
But in dm it is limited only to Renoir.
Now we need it for Vangogh.
[How]
Apply system context setup in dm_init to all APUs.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New value breaks VSR on high refresh panels, reverting until a fix is developed
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn3_01 supports gpu_vm, but this is not enabled in amdgpu_dm
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When HDCP is on, some display would introduce audio noise during
HDCP handling.
[How]
Mute before HDCP handling when disabling core link. Unmute after
HDCP when enabling core link.
Signed-off-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Without additional HostVM Latency, Renoir takes 2us longer to exit
self-refresh. This causes underflow in certain cases.
[How]
Add table for Renoir with updated sr exit latencies for WM set A.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
At very high pixel clock, bandwidth calculation exceeds 32 bit size
and overflow value. This causes the resulting selection of link rate
to be inaccurate.
[How]
Change order of operation and use fixed point to deal with integer
accuracy. Also address bug found when forcing link rate.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With the addition of dc_lock acquire before dc_link_handle_hpd_rx_irq,
there will be a deadlock situation where commit state sends a request
for payload allocation on MST and wait for HPD to process DOWN_REP.
[How]
Move forward the MST message handling in handle_hpd_rx_irq so that
it will not rely on call to dc_link_handle_hpd_rx_irq.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, the offset provided to dcn30_set_disp_pattern_generator is
not forwarded to OPP for display pattern generation, resulting in
misaligned patterns and test failures.
[How]
Use the provided offset.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Change in DCN10 to use IMMEDIATE_UPDATE mode for AFMT is not
reflected in DCN30 as it uses VPG.
[How]
Use IMMEDIATE_UPDATE mode for DCN30 in VPG.
Signed-off-by: Judy Cai <HuiYi.Cai@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
power_down_on_boot is designed to power down HW when set mode is not
called before timeout. It can happen in headless system or booting with
the display is output by non-AMD GPU only.
The function will be executed only if it's not seamless boot. So in
seamless boot, the HW is still on.
It's not necessary to check this since there's no display data in both
cases.
[How]
Remove seamless boot checking in power_down_on_boot.
Signed-off-by: John Wu <john.wu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bump into calcReducedBlankingTiming because of mode query failed.
In this function,
timing.displayColorDepth == DISPLAY_COLOR_DEPTH_UNDEFINED.
Then req_bw == 0 because of bits_per_channel == 0.
So decide edp link settings, use default RBRx1 for special timing.
[How]
Set default bits_per_channel is 8.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add support for new fw command for runtime feature detection.
[How]
Driver sends command through ring buffer, and fw returns data back
through this command.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How & Why]
Allow clk_mgr functions to be reused by making then non-static
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Calls to disable/enable stream should be guarded with dc_lock.
[How]
Add dc_lock before calling into dc_link_handle_hpd_rx_irq.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Signal FreeSync display that we are in Fixed Rate mode, and
expand the FreeSync range to 1024.
[How]
Set the new bit in SB16:bit0, and augment the min and max
refresh rate with 2 extra bits.
Signed-off-by: AMD\ramini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement feature of VSIF V3
[How]
Set refresh rate MSB for extended range
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we accepted non-linear buffers for the cursor plane. This
results in bad output, DC validation failures and oops.
Make sure the FB uses a linear layout in the atomic check function.
The GFX8- check is inspired from ac_surface_set_bo_metadata in Mesa.
The GFX9+ check comes from convert_tiling_flags_to_modifier.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1390
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As more checks are added, the indentation makes the code harder to read.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid a recently added warning:
Bogus possible_crtcs: [ENCODER:65:TMDS-65] possible_crtcs=0xf (full crtc mask=0x7)
WARNING: CPU: 3 PID: 439 at drivers/gpu/drm/drm_mode_config.c:617 drm_mode_config_validate+0x178/0x200 [drm]
In this case the warning is harmless, but confusing to users.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209123
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the width check with a pitch check, which matches DM internals.
Add a new check to make sure the pitch (in pixels) matches the width.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of relying on pitch (in pixels) == width, use the FB pitch. This
is less confusing to readers, and works correctly if we ever support FBs
with a pitch (in pixels) != width.
This also makes the code symmetrical with fill_plane_buffer_attributes.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of silently failing the atomic check, explain what happened via
a debug log. This makes it easier for user-space to figure out why
something failed.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c: In function ‘dm_dtn_log_append_v’:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:345:2: warning: function ‘dm_dtn_log_append_v’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:375:3: warning: function ‘dm_dtn_log_append_v’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/vector.c:55:6: warning: no previous prototype for ‘dal_vector_presized_costruct’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/fixpt31_32.c:29:32: warning: ‘dc_fixpt_pi’ defined but not used [-Wunused-const-variable=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:34:10: warning: no previous prototype for ‘fixed_point_to_int_frac’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/conversion.c:81:6: warning: no previous prototype for ‘convert_float_matrix’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:664:20: warning: no previous prototype for ‘pp_nv_set_pme_wa_enable’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:538:6: warning: no previous prototype for ‘pp_rv_set_wm_ranges’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:590:6: warning: no previous prototype for ‘pp_rv_set_pme_wa_enable’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:601:6: warning: no previous prototype for ‘pp_rv_set_active_display_count’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:614:6: warning: no previous prototype for ‘pp_rv_set_min_deep_sleep_dcfclk’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:627:6: warning: no previous prototype for ‘pp_rv_set_hard_min_dcefclk_by_freq’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_pp_smu.c:640:6: warning: no previous prototype for ‘pp_rv_set_hard_min_fclk_by_freq’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:128: warning: Function parameter or member 'lut' not described in '__drm_lut_to_dc_gamma'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:128: warning: Function parameter or member 'gamma' not described in '__drm_lut_to_dc_gamma'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:128: warning: Function parameter or member 'is_legacy' not described in '__drm_lut_to_dc_gamma'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_color.c:426: warning: Function parameter or member 'dc_plane_state' not described in 'amdgpu_dm_update_plane_color_mgmt'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'dpp_input_csc_matrix' is used by some, but not all source files which
include dpp.h.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/inc/hw/dpp.h:50:42: warning: ‘dpp_input_csc_matrix’ defined but not used [-Wunused-const-variable=]
NB: Snipped lots of these for brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add feature caps to allow way for driver to query what features
FW supports
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPCS related info needs to be properly defined within code.
[How]
Add missing DPCS related info to code.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Whenever DSC parameters are changed we need to perform full modeset to commit
DSC changes to DC.
[How]
If dsc_force_changed is set, need to set mode_changed on new CRTC state
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DSCL memory blocks should be powered down when they're not in use.
This will reduce power consumption.
[How]
1. Write to DSCL_MEM_PWR_FORCE to put memory to shutdown when DSCL is not
used.
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.
[How]
Get current clocks value to update init clocks.
To avoid underflow.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable_link_dp_mst checks that cur_link_settings != unknown to determine
that the link is already enabled, to skip redundant enablement calls for
multiple streams on the same link. During dc_reinitialize_hardware,
cur_link_settings on previously-active links is not cleared, which blocks
MST links from being re-enabled after a reinitialization.
[How]
- check for link_status->link_active instead, as it's the real intent
- clear cur_link_settings when we clear link_active
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
does that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The HDR3DLUT and SHAPER memory blocks should be powered down when
they're not in use. This will reduce power consumption.
[How]
1. Write to HDR3DLUT_MEM_PWR_FORCE to put memory to shutdown
when HDR3DLUT is not used.
2. Write to SHAPER_MEM_PWR_FORCE to put memory to shutdown
when SHAPER is not used.
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2208f39c75.
It caused a regression in internal FPGA tests.
Signed-off-by: Eric Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Set dpms off on the connector that was unplugged, for the side effect of
releasing some references held through deallocation of MST payload. This is
the expected behaviour for non MST devices as well.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Recent changes to upstream mst code remove the callback which
cleared the internal state for mst. Move the missing functionality
that was previously called through the destroy call back for mst connector
destroy
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting any rotation on the cursor plane is ignored by amdgpu.
Because of DCE/DCN design, it's not possible to rotate the cursor.
Instead of displaying the wrong result, stop advertising the rotation
property for the cursor plane.
Now that we check all cursor plane properties in amdgpu_dm_atomic_check,
remove the TODO.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't allow user-space to set different scaling parameters for the
cursor plane and for the primary plane. Because of DCE/DCN design,
it's not possible to have a mismatch.
The old check in dm_update_plane_state is superseded by this new
check.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looking at handle_cursor_update, it doesn't seem like src_{x,y,w,h}
are picked up by DC. I also tried to change these parameters via a
test KMS client, and amdgpu ignored them. Instead of displaying the
wrong result, reject the atomic commit.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expands the cursor checks added in "drm/amd/display: add basic
atomic check for cursor plane" to also include a FB size check. Without
this patch, setting a FB smaller than max_cursor_size with an invalid
width would result in amdgpu error messages and a fallback to a 64-byte
width:
[drm:hubp1_cursor_set_attributes [amdgpu]] *ERROR* Invalid cursor pitch of 100. Only 64/128/256 is supported on DCN.
Note that DC uses the word "pitch" when actually checking the FB width.
Indeed, the function handle_cursor_update does this:
attributes.pitch = attributes.width;
In my tests, the cursor FB actually had a pitch of 512 bytes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cached backlight is never being updated since panel_cntl specific
registers were moved from abm to panel_cntl.
[How]
Update cached backlight in set_abm_immediate_disable as what we used to
do. Also, update the priority of backlight restore mechanism so that
cached backlight has the highest priority since it is always correct.
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ASIC requirement.
[how]
Make disable_*_power_gate to false.
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The GAMCOR memory blocks should be powered down when they're not in use.
This will reduce power consumption.
[How]
Write to GAMCOR_MEM_PWR_FORCE to put memory to shutdown
when GAMCOR is not used.
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove temp macro since the enum is in header file already.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
only apply multiple display power optimization in case there are more
than one internal display.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Get internal display info from vbios and pass it to dmub fw to determine
if multiple display optmization is needed.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The BLNDGAM memory blocks should be powered down when they're not in
use. This will reduce power consumption.
[How]
1. Write to BLNDGAM_MEM_PWR_FORCE to put memory to shutdown when BLNDGAM
is not used.
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
t9 delay func is called twice after setting power off, the unexpected
action results in a doubling of the added 140ms t9 delay
[How]
If the backlight has been turned off, does not turn it off again
Signed-off-by: Sherry <Yao.Wang1@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The MPCC may change and request data when the pipes are switching from 2
to 1 or 1 to 2. During the switch there is a possibility of underflow
and flicker/missing data.
[How]
During VBlank the MPCC won't request data. The trick is to delay and
wait on VBlank, ONLY when pipes are either turning on or off, right
before MPCC is reset for the pipes.
Signed-off-by: Tashfique Abdullah <tabdullah@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some platforms, DMCU is no longer used. In these cases, some DMCU
memory should be completely powered off to save power.
[How]
1. Set DMCU_ERAM_MEM_PWR_FORCE to shutdown memory when DMCU is not in
use
2. Added a debug option to allow this behaviour to be turned off
3. Set all memory low power debug options to off first, to not
immediately cause problems
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect panel register settings are applied for power sequence because
the register macro is not defined in resource.
[How]
Implement same register space to future resource files.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some sink devices wish to have access to the minimum HBlank supported by
the ASIC.
[How]
Make the ASIC minimum HBlank available in Source Device information
address 0x340.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
HDCP 1.4 failed on SL8800 SW w/a test driver use.
[how]
slower down the HW i2c speed when used by HW i2c.
this request: each acquired_i2c_engine setup the i2c speed needed.
and set the I2c engine for HDCP use at release_engine.
this covers SW using HW I2c engine and HDCP using HW I2c engine. for
dmcu using HW I2c engine, needs add similar logic in dmcufw.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dpcs reg are missing for dcn302 link encoder regs list, so add them.
Just like dcn3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These comments are helpful in understanding which case each if
statement handles.
[How]
Add comments for state transitions (9 possible cases)
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We call add display multiple times because DESIRED->ENABLED cannot
happen instantaneously. We can't compare the new_state/old_state to
avoid this because on unplug we set the state to DESIRED and on hotplug
the state will still be DESIRED.
[How]
Add a flag to dm_connector_state to keep track of when to enable or
disable HDCP
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We recently improved our display atomic commit and tail sequence to
avoid some issues related to concurrency. One of the major changes
consisted of moving the interrupt disable and the stream release from
our atomic commit to our atomic tail (commit 6d90a208cf
("drm/amd/display: Move disable interrupt into commit tail")) .
However, the new code introduced inside our commit tail function was
inserted right after the function
drm_atomic_helper_update_legacy_modeset_state(), which has routines for
updating internal data structs related to timestamps. As a result, in
certain conditions, the display module can reach a situation where we
update our constants and, after that, clean it. This situation generates
the following warning:
amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722
drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm]
...
RIP:
0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340
[drm]
...
Call Trace:
? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu]
drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm]
drm_get_last_vbltimestamp+0xad/0xc0 [drm]
drm_reset_vblank_timestamp+0x63/0xd0 [drm]
drm_crtc_vblank_on+0x85/0x150 [drm]
amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu]
commit_tail+0x99/0x130 [drm_kms_helper]
drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper]
amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu]
drm_atomic_commit+0x4a/0x50 [drm]
drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper]
drm_mode_setcrtc+0x20b/0x7e0 [drm]
? tomoyo_path_number_perm+0x6f/0x200
? drm_mode_getcrtc+0x190/0x190 [drm]
drm_ioctl_kernel+0xae/0xf0 [drm]
drm_ioctl+0x245/0x400 [drm]
? drm_mode_getcrtc+0x190/0x190 [drm]
amdgpu_drm_ioctl+0x4e/0x80 [amdgpu]
__x64_sys_ioctl+0x91/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
For fixing this issue we rely upon a refactor introduced on
drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping
constant update from drm_atomic_helper_update_legacy_modeset_state()")
which decouples constant values update from
drm_atomic_helper_update_legacy_modeset_state to a new helper.
Basically, this commit uses this new helper and place it right after our
release module to avoid a situation where our CRTC struct gets wrong
values.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update bounding box as per spread sheet.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After removing added latency for HostVM by default, DDR4 sr exit
latencies were no longer large enough for some panels and caused
underflow.
[How]
Add 1us to sr enter/exit watermark.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should use int for counting variable
[How]
Change type from bool to uint32_t
Signed-off-by: Raymond Yang <rayyang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Instead of calculating CRC on whole frame, add flexibility to calculate
CRC on specific frame region.
[How]
Add few crc window coordinate properties. By default, CRC is calculated
on whole frame unless user space specifies the CRC calculation window.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add a dual edp power optimization flag, so driver will
notify this flag to dmub FW to determine if apply the
power optimization.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Blue screen when PNP with multiple monitor or hotplug external monitor when playing video
due to dpp dto isn't programmed properly.
If lower dpp clock, dpp dto need to be programmed first, and actual dpp clk not avalable yet.
[How]
set dpp dto as per request clk for lower case before dpp clk update, and after dpp clk updated
set dpp dto again with actual dpp clk.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The I2C memory blocks should be powered down when they are not in use.
This will reduce power consumption.
[How]
1. Write to I2C_LIGHT_SLEEP_FORCE to put memory in light sleep when
released
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Check if the eDP sink supports the dynamic backlight control
[How]
Query the dynamic backlight capability in DPCD (eDP case only)
Signed-off-by: Roy Chan <roy.chan@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor is missing on displays 2 and up when doing rotated
display groups in 1xnY setup. Calculation puts cursor
out of bounds so it is not enabled.
[How]
In dcn10_set_cursor_position(), add in viewport.y into cursor
calculations for 1xnY rotated display groups.
For pipe split, check viewport.y for both pipes and use lower one
to normalize cursor position before calculations.
Add odm 2:1 support ( using same calculations as pipe split ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently if VBIOSSMC_Result_UnknownCmd is returned as result of smu msg
there is no way to know. Put 1 in param so if 1 is returned, this unknown case is handled.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the system does not have hostvm enabled, disabling it for
DML validation will allow more modes to pass at lower voltage
levels.
[How]
When initializing HostVM save state to hubbub and read back
when populating DML pipes from context.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Use GPINT command to get PSR residency from FW.
[How]
Hook up PSR residency command to DSAT.
Since PSR Count Request is deprecated, we will use this.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dpp dto phase and modulo are programmed with actual dpp global clk
and pipe clk. Need to use actual dpp clk to prgoram dpp dto modulo
to get more accuracy ratio.
[How]
assign actual dpp clk to dccg for dpp modulo programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein