Adding back the nonstandard ioctl commands caused -Wrestrict warnings
when building with 'make W=1':
drivers/staging/r8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_read_rf':
drivers/staging/r8188eu/os_dep/ioctl_linux.c:5515:27: error: 'sprintf' argument 3 overlaps destination object 'extra' [-Werror=restrict]
5515 | sprintf(extra, "%s %d", extra, strtou);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/r8188eu/os_dep/ioctl_linux.c:5470:54: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
5470 | struct iw_point *wrqu, char *extra)
| ~~~~~~^~~~~
Change these to the same construct used elsewhere in that driver,
with an offset to the string to make the warning go away.
The ioctl commands were previously removed, and it's unlikely that
anything is actually using them, so ideally I would prefer to have
them removed again.
The lack of range checking of the 'extra' output buffer is also
slightly worrying, but I did not check whether this could cause
harm.
Fixes: 2b42bd58b3 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210920095525.1150678-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.
Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect.
Fixes: a18e151757 ("greybus: more uart work")
Cc: stable@vger.kernel.org # 4.9
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
-----BEGIN PGP SIGNATURE-----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=PQpb
-----END PGP SIGNATURE-----
Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more cleanups
on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS9/lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZNwCggKViEViSGqJFIafAZZjmI3Nt6tUAoMkRlhcd
n1MS3snS0Sq+7BdJs37M
=GyxP
-----END PGP SIGNATURE-----
Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had been
maintained out-of-tree by Larry with the end goal of actually being able
to get this driver out of staging eventually. Despite that driver being
"newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to see,
that is why there are additions to the mfc and misc driver subsystems.
All of these were acked by the various subsystem maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+BKg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yku5gCgyMykJ2mwtEiQxfAWu13e2iZX29AAnjk38ANp
Un2sQXYnL9RVlcnjLg+X
=jMWL
-----END PGP SIGNATURE-----
Merge tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO and staging driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had
been maintained out-of-tree by Larry with the end goal of actually
being able to get this driver out of staging eventually. Despite that
driver being "newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to
see, that is why there are additions to the mfc and misc driver
subsystems. All of these were acked by the various subsystem
maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
[ Note: the r8188eu merge clashed with commit 89939e8906 ("staging:
rtlwifi: use siocdevprivate") from the networking tree. When resolving
the issue, I noted that the whole r8188eu rtw_android code is dead
since commit ae7471cae0 ("staging: r8188eu: remove rtw_ioctl
function").
End result: the merge resolution was to throw all of that away,
rather than do the mindless fixup to code that isn't actually
reachable - Linus ]
* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
staging: vt6655: Remove filenames in files
staging: r8188eu: add extra TODO entries
staging: vt6656: Remove filenames in files
staging: wlan-ng: fix invalid assignment warning
staging: r8188eu: rename fields of struct rtl_ps
staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
staging: r8188eu: rename fields of struct dyn_primary_cca
staging: r8188eu: rename struct field Wifi_Error_Status
staging: r8188eu: Provide a TODO file for this driver
staging: r8188eu: remove unneeded variable
staging: r8188eu: remove unneeded conversions to bool
staging: r8188eu: remove {read,write}_macreg
staging: r8188eu: core: remove condition with no effect
staging: r8188eu: remove ethernet.h header file
staging: r8188eu: remove ip.h header file
staging: r8188eu: remove if_ether.h header file
staging: r8188eu: make rtw_deinit_intf_priv return void
staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEukBYACgkQMUZtbf5S
IrsyHA//TO8dw18NYts4n9LmlJT2naJ7yBUUSSXK/M+DtW0MQ9nnHhqzPm5uJdRl
IgQTNJrW3dYzRwgqaWZqEwO1t5/FI+f87ND1Nsekg7x9tF66a6ov5WxU26TwwSba
U+si/inQ/4chuQ+LxMQobqCDxaLE46I2dIoRl+YfndJ24DRzYSwAEYIPPbSdfyU+
+/l+3s4GaxO4k/hLciPAiOniyxLoUNiGUTNh+2yqRBXelSRJRKVnl+V22ANFrxRW
nTEiplfVKhlPU1e4iLuRtaxDDiePHhw9I3j/lMHhfeFU2P/gKJIvz4QpGV0CAZg2
1VvDU32WEx1GQLXJbKm0KwoNRUq1QSjOyyFti+BO7ugGaYAR4gKhShOqlSYLzUtB
tbtzQhSNLWOGqgmSJOztZb5kFDm2EdRSll5/lP2uyFlPkIsIp0QbscJVzNTnS74b
Xz15ZOw41Z4TfWPEMWgfrx6Zkm7pPWkly+7WfUkPcHa1gftNz6tzXXxSXcXIBPdi
yQ5JCzzxrM5573YHuk5YedwZpn6PiAt4A/muFGk9C6aXP60TQAOS/ppaUzZdnk4D
NfOk9mj06WEULjYjPcKEuT3GGWE6kmjb8Pu0QZWKOchv7vr6oZly1EkVZqYlXELP
AfhcrFeuufie8mqm0jdb4LnYaAnqyLzlb1J4Zxh9F+/IX7G3yoc=
=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
The regular pile:
- A few improvements to the mutex code
- Documentation updates for atomics to clarify the difference between
cmpxchg() and try_cmpxchg() and to explain the forward progress
expectations.
- Simplification of the atomics fallback generator
- The addition of arch_atomic_long*() variants and generic arch_*()
bitops based on them.
- Add the missing might_sleep() invocations to the down*() operations of
semaphores.
The PREEMPT_RT locking core:
- Scheduler updates to support the state preserving mechanism for
'sleeping' spin- and rwlocks on RT. This mechanism is carefully
preserving the state of the task when blocking on a 'sleeping' spin- or
rwlock and takes regular wake-ups targeted at the same task into
account. The preserved or updated (via a regular wakeup) state is
restored when the lock has been acquired.
- Restructuring of the rtmutex code so it can be utilized and extended
for the RT specific lock variants.
- Restructuring of the ww_mutex code to allow sharing of the ww_mutex
specific functionality for rtmutex based ww_mutexes.
- Header file disentangling to allow substitution of the regular lock
implementations with the PREEMPT_RT variants without creating an
unmaintainable #ifdef mess.
- Shared base code for the PREEMPT_RT specific rw_semaphore and rwlock
implementations. Contrary to the regular rw_semaphores and rwlocks the
PREEMPT_RT implementation is writer unfair because it is infeasible to
do priority inheritance on multiple readers. Experience over the years
has shown that real-time workloads are not the typical workloads which
are sensitive to writer starvation. The alternative solution would be
to allow only a single reader which has been tried and discarded as it
is a major bottleneck especially for mmap_sem. Aside of that many of
the writer starvation critical usage sites have been converted to a
writer side mutex/spinlock and RCU read side protections in the past
decade so that the issue is less prominent than it used to be.
- The actual rtmutex based lock substitutions for PREEMPT_RT enabled
kernels which affect mutex, ww_mutex, rw_semaphore, spinlock_t and
rwlock_t. The spin/rw_lock*() functions disable migration across the
critical section to preserve the existing semantics vs. per CPU
variables.
- Rework of the futex REQUEUE_PI mechanism to handle the case of early
wake-ups which interleave with a re-queue operation to prevent the
situation that a task would be blocked on both the rtmutex associated
to the outer futex and the rtmutex based hash bucket spinlock.
While this situation cannot happen on !RT enabled kernels the changes
make the underlying concurrency problems easier to understand in
general. As a result the difference between !RT and RT kernels is
reduced to the handling of waiting for the critical section. !RT
kernels simply spin-wait as before and RT kernels utilize rcu_wait().
- The substitution of local_lock for PREEMPT_RT with a spinlock which
protects the critical section while staying preemptible. The CPU
locality is established by disabling migration.
The underlying concepts of this code have been in use in PREEMPT_RT for
way more than a decade. The code has been refactored several times over
the years and this final incarnation has been optimized once again to be
as non-intrusive as possible, i.e. the RT specific parts are mostly
isolated.
It has been extensively tested in the 5.14-rt patch series and it has
been verified that !RT kernels are not affected by these changes.
-----BEGIN PGP SIGNATURE-----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=IEqE
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking and atomics updates from Thomas Gleixner:
"The regular pile:
- A few improvements to the mutex code
- Documentation updates for atomics to clarify the difference between
cmpxchg() and try_cmpxchg() and to explain the forward progress
expectations.
- Simplification of the atomics fallback generator
- The addition of arch_atomic_long*() variants and generic arch_*()
bitops based on them.
- Add the missing might_sleep() invocations to the down*() operations
of semaphores.
The PREEMPT_RT locking core:
- Scheduler updates to support the state preserving mechanism for
'sleeping' spin- and rwlocks on RT.
This mechanism is carefully preserving the state of the task when
blocking on a 'sleeping' spin- or rwlock and takes regular wake-ups
targeted at the same task into account. The preserved or updated
(via a regular wakeup) state is restored when the lock has been
acquired.
- Restructuring of the rtmutex code so it can be utilized and
extended for the RT specific lock variants.
- Restructuring of the ww_mutex code to allow sharing of the ww_mutex
specific functionality for rtmutex based ww_mutexes.
- Header file disentangling to allow substitution of the regular lock
implementations with the PREEMPT_RT variants without creating an
unmaintainable #ifdef mess.
- Shared base code for the PREEMPT_RT specific rw_semaphore and
rwlock implementations.
Contrary to the regular rw_semaphores and rwlocks the PREEMPT_RT
implementation is writer unfair because it is infeasible to do
priority inheritance on multiple readers. Experience over the years
has shown that real-time workloads are not the typical workloads
which are sensitive to writer starvation.
The alternative solution would be to allow only a single reader
which has been tried and discarded as it is a major bottleneck
especially for mmap_sem. Aside of that many of the writer
starvation critical usage sites have been converted to a writer
side mutex/spinlock and RCU read side protections in the past
decade so that the issue is less prominent than it used to be.
- The actual rtmutex based lock substitutions for PREEMPT_RT enabled
kernels which affect mutex, ww_mutex, rw_semaphore, spinlock_t and
rwlock_t. The spin/rw_lock*() functions disable migration across
the critical section to preserve the existing semantics vs per-CPU
variables.
- Rework of the futex REQUEUE_PI mechanism to handle the case of
early wake-ups which interleave with a re-queue operation to
prevent the situation that a task would be blocked on both the
rtmutex associated to the outer futex and the rtmutex based hash
bucket spinlock.
While this situation cannot happen on !RT enabled kernels the
changes make the underlying concurrency problems easier to
understand in general. As a result the difference between !RT and
RT kernels is reduced to the handling of waiting for the critical
section. !RT kernels simply spin-wait as before and RT kernels
utilize rcu_wait().
- The substitution of local_lock for PREEMPT_RT with a spinlock which
protects the critical section while staying preemptible. The CPU
locality is established by disabling migration.
The underlying concepts of this code have been in use in PREEMPT_RT for
way more than a decade. The code has been refactored several times over
the years and this final incarnation has been optimized once again to be
as non-intrusive as possible, i.e. the RT specific parts are mostly
isolated.
It has been extensively tested in the 5.14-rt patch series and it has
been verified that !RT kernels are not affected by these changes"
* tag 'locking-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (92 commits)
locking/rtmutex: Return success on deadlock for ww_mutex waiters
locking/rtmutex: Prevent spurious EDEADLK return caused by ww_mutexes
locking/rtmutex: Dequeue waiter on ww_mutex deadlock
locking/rtmutex: Dont dereference waiter lockless
locking/semaphore: Add might_sleep() to down_*() family
locking/ww_mutex: Initialize waiter.ww_ctx properly
static_call: Update API documentation
locking/local_lock: Add PREEMPT_RT support
locking/spinlock/rt: Prepare for RT local_lock
locking/rtmutex: Add adaptive spinwait mechanism
locking/rtmutex: Implement equal priority lock stealing
preempt: Adjust PREEMPT_LOCK_OFFSET for RT
locking/rtmutex: Prevent lockdep false positive with PI futexes
futex: Prevent requeue_pi() lock nesting issue on RT
futex: Simplify handle_early_requeue_pi_wakeup()
futex: Reorder sanity checks in futex_requeue()
futex: Clarify comment in futex_requeue()
futex: Restructure futex_requeue()
futex: Correct the number of requeued waiters for PI
futex: Remove bogus condition for requeue PI
...
Add entry for CFG80211 to reflect that it is currently being worked on
and is a desirable feature to have for this driver. Leave entries for
LIB80211 and MAC80211 in case anyone else wishes to work on them - they
can always be removed later, but MAC80211 in particular would certainly
be good to aim for. Also, include an entry for improving error handling,
as this is another goal of the cleanup effort.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210828000231.1458-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch.pl warning: It's generally not useful to have the filename in
the file
Remove the filenames.
Signed-off-by: Aldas Taraškevičius <aldas60@gmail.com>
Link: https://lore.kernel.org/r/20210827163203.4100-1-aldas60@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p80211_hdr->frame_control is u16, change to __le16
to satisfy sparse warning:
wlan-ng/prism2sta.c:253:43: warning: invalid assignment: |=
wlan-ng/prism2sta.c:253:43: left side has type unsigned short
wlan-ng/prism2sta.c:253:43: right side has type restricted __le16
Fixes: 6277fbfdd2 ("staging: wlan-ng: Remove pointless a3/a4 union")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Aakash Hemadri <aakashhemadri123@gmail.com>
Link: https://lore.kernel.org/r/20210828042949.2276341-1-aakashhemadri123@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide a TODO file that lists the tasks that should be carried out in
order to move this driver off drivers/staging.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210827100813.18610-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are only two definitions from ethernet.h used in the driver.
Namely:
#define ETHERNET_HEADER_SIZE 14 /* Ethernet Header Length */
#define LLC_HEADER_SIZE 6 /* LLC Header Length */
Both are only used in the file core/rtw_recv.c. Replace the usage of
ETHERNET_HEADER_SIZE with ETH_HLEN, move the definition of LLC_HEADER_SIZE
into rtw_recv.h and remove the now unused ethernet.h header file.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct ip_options declared in ip.h is only unsed in the optlength
macro which is also defined in ip.h and not used in the driver code.
All other definitions/declarations in ip.h are duplicated from
<include/uapi/linux/ip.h>. Remove the ip.h header file and its includes.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All constants, declarations and macros in if_ether.h are either
duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
if_ether.h and its includes.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_deinit_intf_priv() always return success, so there is no need in
return value
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210823184059.19742-1-paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-9-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add __aligned(2) to eth address buffers in structs rx_pkt_attrib and
pkt_attrib to ensure proper alignment for usage with functions from
<linux/etherdevice.h>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver is for chips that do not operate in the 5 GHz band.
Remove some 5 GHz related code.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823193028.12391-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All functions declared in the cmd_osdep.h header file are only used in
a single c source file. Make the functions static and remove the header
file and its includes.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210821155151.25822-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 16- and 32-bit quantities in the dhcp message definition must be
big endian.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210821151459.26078-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove forward declaration of Efuse_Read1ByteFromFakeContent function
from core/rtw_efuse.c, as the function is defined in full directly
after this and therefore this forward declaration is redundant.
In addition, convert the storage class of the function to static, as the
function is only used with rtw_efuse.c, and tidy up the signature
alignment.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Michael Straube<straube.linux@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210821105615.6307-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "pbackup_remainder_ie" variable is not freed when "pwps_ie_src" is null
Fixes: 15865124fe ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com>
Link: https://lore.kernel.org/r/20210821081824.14745-1-xyz.sun.ok@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the pipe for reading or writing in usbctrl_vendorreq only once.
There's no need to set it again for every retry.
This patch is an adaptation of commit 889ed8b5e3 ("staging: rtl8188eu:
set pipe only once") for the new r8188eu driver.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function pointers which are not used by the r8188eu driver.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary variables, check the length.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary variables, summarize declarations and assignments.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary variables, summarize declarations and assignments.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VENDOR_READ and VENDOR_WRITE defines are not used.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the numeric values with USB constants to make their
meaning clearer.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment, usbctrl_vendorreq's requesttype parameter must be set to
1 for reading and 0 for writing. It's then converted to the actual
bmRequestType for the USB control request. We can simplify the code and
avoid this conversion if the caller passes the actual bmRequestType.
This patch is an adaptation of commit 788fde0310 ("staging: rtl8188eu:
use actual request type as parameter") for the new r8188eu driver.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann