Fix following warnings caused by mismatch bewteen function parameters
and comments.
drivers/hid/hid-core.c:931: warning: Function parameter or member 'hid' not described in 'hid_parse_report'
drivers/hid/hid-core.c:931: warning: Excess function parameter 'device' description in 'hid_parse_report'
drivers/hid/hid-core.c:961: warning: Function parameter or member 'hid' not described in 'hid_validate_values'
drivers/hid/hid-core.c:961: warning: Excess function parameter 'device' description in 'hid_validate_values'
drivers/hid/hid-core.c:1452: warning: Function parameter or member 'report' not described in 'hid_match_report'
drivers/hid/hid-core.c:1452: warning: Excess function parameter 'report_type' description in 'hid_match_report'
drivers/hid/hid-core.c:2132: warning: Function parameter or member 'drv' not described in 'new_id_store'
drivers/hid/hid-core.c:2132: warning: Excess function parameter 'driver' description in 'new_id_store'
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen2.
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen3.
It is probably also needed for the Lenovo X1 Tablet Gen2 with PID 0x60a3
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is an if statement that is indented too deeply, fix this by removing the
extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the file has been open in non-blocking mode, EIO or ERESTARTSYS
would never be returned even if they should (for example when device
has been unplugged, you want EIO and not EAGAIN to be returned).
Move the O_NONBLOCK check after other checks have been performed.
Based on similar to patches hidraw and hiddev by Founder Fang
<founder.fang@gmail.com> and Jiri Kosina <jkosina@suse.cz>.
Signed-off-by: Laurent Gauthier <laurent.gauthier@soccasys.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adding printouts to the i2c_hid_probe() function shows that it takes
quite some time. It used to take about 70 ms, but after commit
eef4016243 ("HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON
commands") it takes about 190 ms. This is not tons of time but it's
not trivial. Because we haven't yet specified that we'd prefer
asynchronous probe for this driver then, if the driver is builtin to
the kernel, we'll wait for this driver to finish before we start
probes for more drivers. Let's set the flag to enable asynchronous
for this driver so that other drivers aren't blocked from probing
until we finish.
Since this driver can be configured as a module and modules are
always asynchronously probed this is quite a safe change and will
benefit anyone who has a reason to build this driver into the kernel
instead of using it as a module.
[jkosina@suse.cz: drop spurious whitespace addition]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer One S1003 2-in-1 keyboard dock uses a Synaptics S910xx touchpad
which is connected to an ITE 8910 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with ITE keyboard chips, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard. Note that like for the
Acer Aspire Switch 10 (SW5-012) the id-table entry matches on the
HID_GROUP_GENERIC generic group so that hid-ite only binds to the
keyboard interface and the mouse/touchpad interface is left untouched
so that hid-multitouch can bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This code doesn't check if "settings->startup_profile" is within bounds
and that could result in an out of bounds array access. What the code
does do is it checks if the settings can be written to the firmware, so
it's possible that the firmware has a bounds check? It's safer and
easier to verify when the bounds checking is done in the kernel.
Fixes: 14bf62cde7 ("HID: add driver for Roccat Kone gaming mouse")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into patchwork
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
In `wiimote_hid_event()`, the `wdata->state.lock` spinlock does not need
to be held while searching `handlers[]` for a suitable handler function.
Change it so the spinlock is only held during the call to the handler
function itself.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The `handlers[]` array contents are never modified, so use the `const`
qualifier.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.
Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.
Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.
This affects:
- rx_resolution member of struct rc_dev
- timeout member of struct rc_dev
- duration member in struct ir_raw_event
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull HID fixes from Jiri Kosina:
- data sanitization and validtion fixes for report descriptor parser
from Marc Zyngier
- memory leak fix for hid-elan driver from Dinghao Liu
- two device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: Sanitize event code and type when mapping input
HID: core: Correctly handle ReportSize being zero
HID: elan: Fix memleak in elan_input_configured
HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller
HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.
Detect the corner case and correctly compute the size.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
When input_mt_init_slots() fails, input should be freed
to prevent memleak. When input_register_device() fails,
we should call input_mt_destroy_slots() to free memory
allocated by input_mt_init_slots().
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.
Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.
One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- regression fix / revert of a commit that intended to reduce probing
delay by ~50ms, but introduced a race that causes quite a few devices
not to enumerate, or get stuck on first IRQ
- buffer overflow fix in hiddev, from Peilin Ye
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "HID: usbhid: do not sleep when opening device"
HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()
HID: quirks: Always poll three more Lenovo PixArt mice
HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON commands
HID: macally: Constify macally_id_table
HID: cougar: Constify cougar_id_table
This reverts commit d313279228.
This patch causes a regression with quite a few devices, as probing fails
because of the race where the first IRQ is dropped on the floor (after
hid_device_io_start() happens, but before the 50ms timeout passess), and
report descriptor never gets parsed and populated.
As this is just a boot time micro-optimization, let's revert the
patch for 5.9 now, and fix this properly eventually for next merge
window.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208935
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Reported-by: Marius Zachmann <mail@mariuszachmann.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Matias Wireless keyboard has an Apple like layout and identifies
as ISO RevB Alu keyboard. Use hid-apple for it so Fn key and media
control functions work as expected.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Before this commit i2c_hid_parse() consists of the following steps:
1. Send power on cmd
2. usleep_range(1000, 5000)
3. Send reset cmd
4. Wait for reset to complete (device interrupt, or msleep(100))
5. Send power on cmd
6. Try to read HID descriptor
Notice how there is an usleep_range(1000, 5000) after the first power-on
command, but not after the second power-on command.
Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad,
not having a delay after the second power-on command causes the HID
descriptor to read as all zeros.
In case we hit this on other devices too, the descriptor being all zeros
can be recognized by the following message being logged many, many times:
hid-generic 0018:0911:5288.0002: unknown main item tag 0x0
At the same time as the BMAX Y13's touchpad issue was debugged,
Kai-Heng was working on debugging some issues with Goodix i2c-hid
touchpads. It turns out that these need a delay after a PWR_ON command
too, otherwise they stop working after a suspend/resume cycle.
According to Goodix a delay of minimal 60ms is needed.
Having multiple cases where we need a delay after sending the power-on
command, seems to indicate that we should always sleep after the power-on
command.
This commit fixes the mentioned issues by moving the existing 1ms sleep to
the i2c_hid_set_power() function and changing it to a 60ms sleep.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-and-tested-by: Andrea Borgia <andrea@borgia.bo.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add(). The irqchip is
instead added while adding the gpiochip.
Cc: Eudean Sun <eudean@arista.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
macally_id_table is not modified and can be made const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
cougar_id_table[] is not changed and can be made const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- fix for some modern devices that return multi-byte battery report,
from Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
- other small assorted fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: add NOGET quirk for Logitech GROUP
HID: Replace HTTP links with HTTPS ones
HID: udraw-ps3: Replace HTTP links with HTTPS ones
HID: mcp2221: Replace HTTP links with HTTPS ones
HID: input: Fix devices that return multiple bytes in battery report
HID: lenovo: Fix spurious F23 key press report during resume from suspend
HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support
HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support
HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic
HID: lenovo: Factor out generic parts of the LED code
HID: lenovo: Merge tpkbd and cptkbd data structures
HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state
HID: Wiimote: Treat the d-pad as an analogue stick
HID: input: do not run GET_REPORT unless there's a Resolution Multiplier
HID: usbhid: remove redundant assignment to variable retval
HID: usbhid: do not sleep when opening device
- fix for some modern devices that return multi-byte battery report, from
Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov
Add HID_QUIRK_NOGET for Logitech GROUP device.
Logitech GROUP is a compound with camera and audio.
When the HID interface in an audio device is requested to get
specific report id, all following control transfers are stalled
and never be restored back.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- linked list race condition fix in hid-steam driver from Rodrigo Rivas
Costa
- assorted deviceID-specific quirks and other small cosmetic cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: avoid repeated "multiplier = " log messages
HID: logitech: Use HIDPP_RECEIVER_INDEX instead of 0xff
HID: quirks: Ignore Simply Automated UPB PIM
HID: apple: Disable Fn-key key-re-mapping on clone keyboards
MAINTAINERS: update uhid and hid-wiimote entry
HID: steam: fixes race in handling device list.
HID: magicmouse: do not set up autorepeat
HID: alps: support devices with report id 2
HID: quirks: Always poll Obins Anne Pro 2 keyboard
HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
Some devices, particularly the 3DConnexion Spacemouse wireless 3D
controllers, return more than just the battery capacity in the battery
report. The Spacemouse devices return an additional byte with a device
specific field. However, hidinput_query_battery_capacity() only
requests a 2 byte transfer.
When a spacemouse is connected via USB (direct wire, no wireless dongle)
and it returns a 3 byte report instead of the assumed 2 byte battery
report the larger transfer confuses and frightens the USB subsystem
which chooses to ignore the transfer. Then after 2 seconds assume the
device has stopped responding and reset it. This can be reproduced
easily by using a wired connection with a wireless spacemouse. The
Spacemouse will enter a loop of resetting every 2 seconds which can be
observed in dmesg.
This patch solves the problem by increasing the transfer request to 4
bytes instead of 2. The fix isn't particularly elegant, but it is simple
and safe to backport to stable kernels. A further patch will follow to
more elegantly handle battery reports that contain additional data.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Darren Hart <darren@dvhart.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Darren Hart <dvhart@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Ultrabook Keyboard sends a spurious F23 key-press when resuming
from suspend. GNOME uses F23 to toggle the touchpad on/off so this causes
the OSD graphics for the touchpad toggle to show on resume.
The keyboard does not actually have a F23 key, se we can simple fix it
by marking the 0x00070072 HID usage, which normally is F23, to be ignored.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for setting the Fn lock value of the ThinkPad 10 Ultrabook
Keyboard through sysfs, re-using the fn_lock sysfs attribute read/write
helpers from the existing ThinkPad Compact Keyboard with TrackPoint
support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some of the function keys special functions all use the same
0x000c0001 usage code, add a mapping for these based on the usage_index;
And add support for the Speaker and Mic mute LEDs integrated into the
F1 and F4 keys.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Except for a single call, there is nothing keyboard-model specific about
the cptkbd fn_lock sysfs attr handlers, rename them dropping the cptkbd
post-/pre-fix, so that they can be re-used for supporting Fn-lock on the
Thinkpad 10 ultrabook kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Factor out the generic parts of the tpkbd LED code, so that they can be
re-used for supporting the LEDs on the Thinkpad 10 ultrabook kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Merge the tpkbd and cptkbd data structures, into a single unified
structure instead of having a separate data structure per keyboard type.
This is a preparation patch for making the tpkbd LED functions more
generic, so that they can be re-used for supporting the LEDs on the
Thinkpad 10 ultrabook keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These messages appear each time the mouse wakes from sleep, in my case
(Logitech M705), every minute or so.
Let's downgrade them to the "debug" level so they don't fill the kernel log
by default.
While we are at it, let's make clear that this is a wheel multiplier (and
not, for example, XY movement multiplier).
Fixes: 4435ff2f09 ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some parts of hid-logitech-dj explicitly referred to 0xff for the
receiver index. This patch changes those references to the
HIDPP_RECEIVER_INDEX definition.
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core.
Instead, we can use pci_save_state() to hint PCI core that the device
should stay at D0 during suspend. By doing so, PCI core will let the
upstream bridges also stays at D0 so the entire hierarchy is in the
correct power state as PCI spec mandates.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As this is a cypress HID->COM RS232 style device that is handled
by the cypress_M8 driver we also need to add it to the ignore list
in hid-quirks.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.
But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.
The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.
This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.
This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.
Cc: Joao Moreno <mail@joaomoreno.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The controllers from the Super Nintendo Classic Edition (AKA the SNES
Mini) appear as a Classic Controller Pro when connected to a Wii
Remote. All the buttons work as the same, with the d-pad being mapped
the same as the d-pad on the Classic Controller Pro. This differs from
the behaviour of most controllers with d-pads and no analogue sticks,
where the d-pad maps to ABS_HAT1X for left and right, and ABS_HAT1Y
for up and down. This patch adds an option to the hid-wiimote module
to make the Super Nintendo Classic Controller behave this way.
The patch has been tested with a Super Nintendo Classic Controller
plugged into a Wii Remote in both with the option both enabled and
disabled. When enabled the d-pad acts as the analogue control, and
when disabled it acts as it did before the patch was applied. This
patch has not been tested with e Wii Classic Controller (either the
original or the pro version) as I do not have one of these
controllers.
Although I have not tested it with these controllers, I think it is
likely this patch will also work with the NES Classic Edition
Controllers.
Signed-off-by: Daniel G. Morse <dmorse@speedfox.co.uk>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Using uhid and KASAN this driver crashed because it was getting
several connection events where it only expected one. Then the
device was added several times to the static device list and it got
corrupted.
This patch checks if the device is already in the list before adding
it.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Siarhei Vishniakou <svv@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Neither the trackpad, nor the mouse want input core to generate autorepeat
events for their buttons, so let's reset the bit (as hid-input sets it for
these devices based on the usage vendor code).
Cc: stable@vger.kernel.org
Reported-by: Yariv <oigevald+kernel@gmail.com>
Tested-by: Yariv <oigevald+kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for devices which that have reports with id == 2
Signed-off-by: Caiyuan Xie <caiyuan.xie@cn.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Obins Anne Pro 2 keyboard (04d9:a293) disconnects after a few
minutes of inactivity when using it wired and typing does not result
in any input events any more. This is a common firmware flaw. So add
the ALWAYS_POLL quirk for this device.
GitHub user Dietrich Moerman (dietrichm) tested the quirk and
requested my help in my project
https://github.com/sriemer/fix-linux-mouse issue 22 to provide
this patch.
Link: https://www.reddit.com/r/AnnePro/comments/gruzcb/anne_pro_2_linux_cant_type_after_inactivity/
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid-multitouch currently runs GET_REPORT for Contact Max and again to
retrieve the Win8 blob. If both are within the same report, the
Resolution Multiplier code calls GET_FEATURE again and this time,
possibly due to timing, it causes the ILITEK-TP device interpret the
GET_FEATURE as an instruction to change the mode and effectively stop
the device from functioning as expected.
Notably: the device doesn't even have a Resolution Multiplier so it
shouldn't be affected by any of this at all.
Fix this by making sure we only execute GET_REPORT if there is
a Resolution Multiplier in the respective report. Where the
HID_QUIRK_NO_INIT_REPORTS field is set we just bail out immediately. This
shouldn't be triggered by any real device anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto <fed.ricchiuto@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The variable retval is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
usbhid tries to give the device 50 milliseconds to drain its queues when
opening the device, but does it naively by simply sleeping in open handler,
which slows down device probing (and thus may affect overall boot time).
However we do not need to sleep as we can instead mark a point of time in
the future when we should start processing the events.
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull input updates from Dmitry Torokhov:
- a new driver for the Azoteq IQS269A capacitive touch controller
- a new driver for the Cypress CY8CTMA140 touchscreen
- updates to Elan and ft5x06 touchscreen drivers
- assorted driver fixes
- msm-vibrator has been removed as we have a more generic solution
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits)
Input: adi - work around module name confict
Input: iqs269a - add missing I2C dependency
Input: elants - refactor elants_i2c_execute_command()
Input: elants - override touchscreen info with DT properties
Input: elants - remove unused axes
Input: add support for Azoteq IQS269A
dt-bindings: input: Add bindings for Azoteq IQS269A
Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups
Input: remove msm-vibrator driver
dt-bindings: Input: remove msm-vibrator
Input: elants_i2c - provide an attribute to show calibration count
Input: introduce input_mt_report_slot_inactive()
dt-bindings: input: touchscreen: elants_i2c: convert to YAML
Input: add driver for the Cypress CY8CTMA140 touchscreen
dt-bindings: touchscreen: Add CY8CTMA140 bindings
Input: edt-ft5x06 - prefer asynchronous probe
Input: edt-ft5x06 - improve power management operations
Input: edt-ft5x06 - move parameter restore into helper
Input: edt-ft5x06 - fix get_default register write access
Input: atkbd - receive and use physcode->keycode mapping from FW
...
After commit c23e2043d5 ("HID: multitouch: do not filter mice nodes"),
MT_CLS_WIN_8 also supports mouse nodes, hence make MT_CLS_WIN_8_DUAL
redundant.
Remove MT_CLS_WIN_8_DUAL accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Two touchpad/trackstick combos are currently not behaving properly.
They define a mouse emulation collection, as per Win8 requirements,
but also define a separate mouse collection for the trackstick.
The way the kernel currently treat the collections is that it
merges both in one device. However, given that the first mouse
collection already defines X,Y and left, right buttons, when
mapping the events from the second mouse collection, hid-multitouch
sees that these events are already mapped, and simply ignores them.
To be able to report events from the tracktick, add a new quirked
class for it, and manually add the 2 devices we know about.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207235
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fix for non-working buttons on knock-off USB dongles for Sony
controllers. These USB dongles are used to connect older Sony DA/DS1/DS2
controllers via USB and are common on Amazon, AliExpress, etc. Without
the patch, the square, X, and circle buttons do not function. These
dongles used to work prior to kernel 4.10 but removing the global DS3
report fixup in commit e19a267b99 ("HID: sony: DS3 comply to Linux gamepad
spec") exposed the problem.
Many people reported the problem on the Ubuntu forums and are working
around the problem by falling back to the 4.9 hid-sony driver.
The problem stems from these dongles incorrectly reporting their button
count as 13 instead of 16. This patch fixes up the report descriptor by
changing the button report count to 16 and removing 3 padding bits.
Cc: stable@vger.kernel.org
Fixes: e19a267b99 ("HID: sony: DS3 comply to Linux gamepad spec")
Signed-off-by: Scott Shumate <scott.shumate@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch allows users to swap the Fn and left Control keys on all Apple
keyboards: internal (e.g. Macbooks) and external (both wired and wireless).
The patch adds a new hid-apple module param: swap_fn_leftctrl (off by default).
Signed-off-by: Zakhar Semenov <mail@free5lot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
input_mt_report_slot_state() ignores "tool" argument when the slot is
closed, which has caused a bit of confusion. Let's introduce
input_mt_report_slot_inactive() to report inactive slot state.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Link: https://lore.kernel.org/r/20200508055656.96389-2-jiada_wang@mentor.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since commit 4bc43a4212 ("HID: asus: Add
hid_is_using_ll_driver(usb_hid_driver) check") the hid-asus.c depends
on the usb_hid_driver symbol. Add a depends on USB_HID to Kconfig to
fix missing symbols errors in hid-asus when USB_HID is not enabled.
Fixes: 4bc43a4212 ("HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The mute key, is broken. All the consumer keys on the keyboard USB
interface work normally, except for mute which only sends press events
and never sends release events.
The touchpad key sends the otherwise unused input report with a report-id
of 5 on the touchpad interface. It too only sends press events. This also
requires extra special handling since the multi-touch touchpad events and
the KEY_F21 events for the touchpad toggle must not be send from the same
input_dev (userspace cannot handle this).
This commit adds special handlig for both, fixing these keys not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The multi-touch touchpad found on the Medion Akoya E1239T's keyboard-dock,
uses the same custom multi-touch protocol as the Asus keyboard-docks
(same chipset vendor, Integrated Technology Express / ITE).
Add support for this using the existing multi-touch touchpad support in
the hid-asus driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the report_size to struct asus_touchpad_info instead of calculating it.
This is a preparation patch for adding support for the multi-touch touchpad
found on the Medion Akoya E1239T's keyboard-dock, which uses the same
custom multi-touch protocol as the Asus keyboard-docks (same chipset
vendor, Integrated Technology Express / ITE).
The only difference in that the Akoya E1239T keyboard-dock's input-reports
have a 5 byte footer instead of a 1 byte footer, which requires the
report_size to be configurable per touchpad-model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a hid_is_using_ll_driver(usb_hid_driver) check to ensure that the
parent device is an usb_interface, before casting the parent device
pointer to an usb_interface pointer with to_usb_interface().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Before this commit the code was trying to keep the mapping for the
left mouse-button, do avoid the hidinput_has_been_populated() check
in hid-input.c from triggering and causing the touchpad input_dev ro
get cleaned up.
But the hidinput_has_been_populated() check happens after the
input_configured callback which sets up all the input bit for the
touchpad, so there is no need to preserve the left button mapping.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make asus_input_mapping() only set EV_REP if we are adding a mapping.
The T100CHI bluetooth keyboard dock has a few input reports for which
we do not create any mappings (these input-reports are present in the
descriptors but never send).
The hid-asus code relies on the HID core not creating input devices for
input-reports without any mappings. But the present of the EV_REP but
counts as a mapping causing 6 /dev/input/event# nodes to be created for
the T100CHI bluetooth keyboard dock. This change brings the amount of
created /dev/input/event# nodes / input-devices down to 4.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Cc: stable@vger.kernel.org
Signed-off-by: Julian Sax <jsbc@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Older compilers like gcc-4.8 don't see that the variable is
initialized when it is used:
In file included from include/linux/compiler_types.h:68:0,
from <command-line>:0:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host':
include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
^
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here
struct shim_fw_info fw_info;
^
Make sure to initialize it before returning an error from ish_query_loader_prop().
Fixes: 91b228107d ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.
Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious
interrupts after resuming from suspend until it receives some input or
is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it
is reset when resuming from suspend.
More information about the bug can be found in this mailing list
discussion: https://www.spinics.net/lists/linux-input/msg59530.html
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The state of the center button was not reported to userspace for the
2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling
code not being updated to support its reduced number of buttons. This
patch uses the actual number of buttons present on the tablet to
assemble a button state bitmap.
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112
Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The syzbot fuzzer discovered a bad race between in the usbhid driver
between usbhid_stop() and usbhid_close(). In particular,
usbhid_stop() does:
usb_free_urb(usbhid->urbin);
...
usbhid->urbin = NULL; /* don't mess up next start */
and usbhid_close() does:
usb_kill_urb(usbhid->urbin);
with no mutual exclusion. If the two routines happen to run
concurrently so that usb_kill_urb() is called in between the
usb_free_urb() and the NULL assignment, it will access the
deallocated urb structure -- a use-after-free bug.
This patch adds a mutex to the usbhid private structure and uses it to
enforce mutual exclusion of the usbhid_start(), usbhid_stop(),
usbhid_open() and usbhid_close() callbacks.
Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
MCP2221 has 4 pins that can be used as GPIO or configured
for alternate functionality such as clock generation and
IRQ detection. This patch adds support for GPIO functionality.
To set direction of a pin or to toggle its state after it
has been configured as GPIO, driver sends command to mcp2221
and parses response received from mcp2221. Based on this
response either 0 or appropriate error code is returned to
GPIO framework.
To get the direction or current state of a pin, driver
sends command and read response from the device. Based on
the response received from device direction or value
is sent to the GPIO framework.
Command from driver to mcp2221 device are output report.
Response received from mcp2221 is input report.
Datasheet (page 45-48) contains details about how to decode
the response received from device:
http://ww1.microchip.com/downloads/en/DeviceDoc/20005565B.pdf
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 15893fa401.
The referenced commit broke pen and touch input for a variety of devices
such as the Cintiq Pro 32. Affected devices may appear to work normally
for a short amount of time, but eventually loose track of actual touch
state and can leave touch arbitration enabled which prevents the pen
from working. The commit is not itself required for any currently-available
Bluetooth device, and so we revert it to correct the behavior of broken
devices.
This breakage occurs due to a mismatch between the order of collections
and the order of usages on some devices. This commit tries to read the
contact count before processing events, but will fail if the contact
count does not occur prior to the first logical finger collection. This
is the case for devices like the Cintiq Pro 32 which place the contact
count at the very end of the report.
Without the contact count set, touches will only be partially processed.
The `wacom_wac_finger_slot` function will not open any slots since the
number of contacts seen is greater than the expectation of 0, but we will
still end up calling `input_mt_sync_frame` for each finger anyway. This
can cause problems for userspace separate from the issue currently taking
place in the kernel. Only once all of the individual finger collections
have been processed do we finally get to the enclosing collection which
contains the contact count. The value ends up being used for the *next*
report, however.
This delayed use of the contact count can cause the driver to loose track
of the actual touch state and believe that there are contacts down when
there aren't. This leaves touch arbitration enabled and prevents the pen
from working. It can also cause userspace to incorrectly treat single-
finger input as gestures.
Link: https://github.com/linuxwacom/input-wacom/issues/146
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Fixes: 15893fa401 ("HID: wacom: generic: read the number of expected touches on a per collection basis")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other
ALPS hardware IDs using this particular touchpad.
Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order
to describe reality better.
Fixes: 640e403b1f ("HID: alps: Add AUI1657 device ID")
Reported-by: Xiaojian Cao <xiaojian.cao@cn.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device is used on Lenovo V130-15IKB variants and uses
the same registers as U1.
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech G11 keyboard is a cheap variant of the G15 without the LCD
screen. It uses the same layout for its extra and macro keys (G1 - G18,
M1-M3, MR) and - from the input subsystem's perspective - behaves just
like the G15, so we can treat it as such.
Tested it with my own keyboard.
Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid-logitech-{dj,hidpp} were originally developed for unifying
receivers but since then they have evolved and now support other types
of receivers and devices. This patch adjusts the original descriptions
with this in mind.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We've recently switched from extracting the value of HID_DG_CONTACTMAX
at a fixed offset (which may not be correct for all tablets) to
injecting the report into the driver for the generic codepath to handle.
Unfortunately, this change was made for *all* tablets, even those which
aren't generic. Because `wacom_wac_report` ignores reports from non-
generic devices, the contact count never gets initialized. Ultimately
this results in the touch device itself failing to probe, and thus the
loss of touch input.
This commit adds back the fixed-offset extraction for non-generic devices.
Link: https://github.com/linuxwacom/input-wacom/issues/155
Fixes: 184eccd403 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
CC: stable@vger.kernel.org # 5.3+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Pull HID updates from Jiri Kosina:
- Logitech HID++ protocol support improvement from Filipe Laíns
- probe fix for Logitech-G* devices from Hans de Goede
- a few other small code cleanups and support for new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()'
HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member
HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member
HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor
HID: lg-g15: Do not fail the probe when we fail to disable F# emulation
HID: appleir: Use devm_kzalloc() instead of kzalloc()
HID: appleir: Remove unnecessary goto label
HID: logitech-dj: add support for the static device in the Powerplay mat/receiver
HID: mcp2221: add usb to i2c-smbus host bridge
HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
HID: quirks: Remove ITE 8595 entry from hid_have_special_driver
Pull trivial tree updates from Jiri Kosina:
"My attempt to revitalize trivial queue I've been neglecting for years
(what a disaster that was for this world, right? :) ) with patches
collected from backlog that were still relevant and not applied
elsewhere in the meantime"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
err.h: remove deprecated PTR_RET for good
blk-mq: Fix typo in comment
x86/boot: Fix comment spelling
sh: mach-highlander: Fix comment spelling
s390/dasd: Fix comment spelling
mfd: wm8994: Fix comment spelling
docs: Add reference in binfmt-misc.rst
genirq: fix kerneldoc comment for irq_desc
drm/amdgpu: fix two documentation mismatch issues
HID: fix Kconfig word ordering
list/hashtable: minor documentation corrections.
The 'RMI_READ_REQUEST_PENDING' bit is already cleared in the error handling
path. There is no need to reset it twice.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Glorious Model O mice (and also at least the Model O-, which is
driver-wise the same mouse) have a bug in the descriptor of HID
Report with ID 2. This report is used for Consumer Control buttons,
which can be mapped using the provided Windows only software.
Here is an excerpt from the original descriptor:
INPUT(2)[INPUT]
Field(0)
Flags( Constant Variable Absolute )
Field(1)
Flags( Constant Variable Absolute )
Field(2)
Flags( Constant Variable Absolute )
The issue is the Constant flag specified on all 3 fields, which
causes the hid driver to ignore changes in these fields and
essentialy causes the buttons to not work at all. The submitted driver
patches the descriptor to end up with the following:
INPUT(2)[INPUT]
Field(0)
Flags( Variable Relative )
Field(1)
Flags( Variable Relative )
Field(2)
Flags( Variable Relative )
The Constant bit is reset and the Relative bit has been set in
order to prevent repeat events when holding down the button.
Additionally, the device name is changed from the hardware-reported
"SINOWEALTH Wired Gaming Mouse" to "Glorious Model O" or "Glorious
Model D".
Signed-off-by: Samuel Čavoj <sammko@sammserver.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
By default the G1-G12 keys on the Logitech gaming keyboards send
F1 - F12 when in "generic HID" mode.
The first thing the hid-lg-g15 driver does is disable this behavior.
We have received a bugreport that this does not work when the keyboard
is connected through an Aten KVM switch. Using a gaming keyboard with
a KVM is a bit weird setup, but still we can try to fail a bit more
gracefully here.
On the G510 keyboards the same USB-interface which is used for the gaming
keys is also used for the media-keys. Before this commit we would call
hid_hw_stop() on failure to disable the F# emulation and then exit the
probe method with an error code.
This not only causes us to not handle the gaming-keys, but this also
breaks the media keys which is a regression compared to the situation
when these keyboards where handled by the generic hidinput driver.
This commit changes the error handling to clear the hiddev drvdata
(to disable our .raw_event handler) and then returning from the probe
method with success.
The net result of this is that, when connected through a KVM, things
work as well as they did before the hid-lg-g15 driver was introduced.
Fixes: ad4203f5a2 ("HID: lg-g15: Add support for the G510 keyboards' gaming keys")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806321
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix a silly word ordering typo.
Fixes: 42337b9d4d ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- string buffer formatting fixes in picolcd and sensor drivers, from
Takashi Iwai
- two new device IDs from Chen-Tsung Hsieh and Tony Fischetti
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: add ALWAYS_POLL quirk to lenovo pixart mouse
HID: google: add moonball USB id
HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow
HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction
where it disconnects and reconnects every minute--each time incrementing
the device number. This patch adds the device id of the device and
specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to
work properly.
Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech G Powerplay has a lightspeed receiver with a static HID++
device with ID 7 attached to it to. It is used to configure the led on
the mat. For this reason I increased the max number of devices.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
MCP2221 is a USB HID to I2C/SMbus host bridge device. This
commit implements i2c and smbus host adapter support. 7-bit
address and i2c multi-message transaction is also supported.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix below warnings reported by coccicheck:
drivers/hid/hid-hyperv.c:197:2-7: WARNING: NULL check before some freeing functions is not needed.
drivers/hid/hid-hyperv.c:211:2-7: WARNING: NULL check before some freeing functions is not needed.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Pull HID subsystem fixes from Jiri Kosina:
- syzkaller-reported error handling fixes in various drivers, from
various people
- increase of HID report buffer size to 8K, which is apparently needed
by certain modern devices
- a few new device-ID-specific fixes / quirks
- battery charging status reporting fix in logitech-hidpp, from Filipe
Laíns
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hid-bigbenff: fix race condition for scheduled work during removal
HID: hid-bigbenff: call hid_hw_stop() in case of error
HID: hid-bigbenff: fix general protection fault caused by double kfree
HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override
HID: alps: Fix an error handling path in 'alps_input_configured()'
HID: hiddev: Fix race in in hiddev_disconnect()
HID: core: increase HID report buffer size to 8KiB
HID: core: fix off-by-one memset in hid_report_raw_event()
HID: apple: Add support for recent firmware on Magic Keyboards
HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
It's possible that there is scheduled work left while the device is
already being removed, which can cause a kernel crash. Adding a flag
will avoid this.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
It's required to call hid_hw_stop() once hid_hw_start() was called
previously, so error cases need to handle this. Also, hid_hw_close() is
not necessary during removal.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The struct *bigben was allocated via devm_kzalloc() and then used as a
parameter in input_ff_create_memless(). This caused a double kfree
during removal of the device, since both the managed resource API and
ml_ff_destroy() in drivers/input/ff-memless.c would call kfree() on it.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply
descriptors, so it has to be added to the override list.
BugLink: https://bugs.launchpad.net/bugs/1858299
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
They are issues:
- if 'input_allocate_device()' fails and return NULL, there is no need
to free anything and 'input_free_device()' call is a no-op. It can
be axed.
- 'ret' is known to be 0 at this point, so we must set it to a
meaningful value before returning
Fixes: 2562756dde ("HID: add Alps I2C HID Touchpad-Stick support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect().
The hiddev_disconnect() function sets "hiddev->exist = 0;" so
hiddev_release() can free it as soon as we drop the "existancelock"
lock. This patch moves the mutex_unlock(&hiddev->existancelock) until
after we have finished using it.
Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com
Fixes: 7f77897ef2 ("HID: hiddev: fix potential use-after-free")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When exporting all other types of report descriptors we print a debug
message. Not doing so for HID++ descriptors makes unaware users think
that no HID++ descriptor was exported.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ITE 8595 chip used in various 2-in-1 keyboard docks works fine with
the hid-generic driver (minus the RF_KILL key) and also keeps working fine
when swapping drivers, so there is no need to have it in the
hid_have_special_driver list.
Note the other 2 USB ids in hid-ite.c were never added to
hid_have_special_driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated,
but the report-number byte is not correctly handled. This results in a
off-by-one in the following memset, causing a kernel Oops and ensuing
system crash.
Note: With commit 8ec321e96e ("HID: Fix slab-out-of-bounds read in
hid_field_extract") I no longer hit the kernel Oops as we instead fail
"controlled" at probe if there is a report too long in the HID
report-descriptor. hid_report_raw_event() is an exported symbol, so
presumabely we cannot always rely on this being the case.
Fixes: 966922f26c ("HID: fix a crash in hid_report_raw_event()
function.")
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Magic Keyboards with more recent firmware (0x0100) report Fn key differently.
Without this patch, Fn key may not behave as expected and may not be
configurable via hid_apple fnmode module parameter.
Signed-off-by: Mansour Behabadi <mansour@oxplot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 8f18eca9eb ("HID: ite: Add USB id match for Acer SW5-012 keyboard
dock") added the USB id for the Acer SW5-012's keyboard dock to the
hid-ite driver to fix the rfkill driver not working.
Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the
"Wireless Radio Control" bits which need the special hid-ite driver on the
second USB interface (the mouse interface) and their touchpad only supports
mouse emulation, so using generic hid-input handling for anything but
the "Wireless Radio Control" bits is fine. On these devices we simply bind
to all USB interfaces.
But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10
(SW5-012)'s touchpad not only does mouse emulation it also supports
HID-multitouch and all the keys including the "Wireless Radio Control"
bits have been moved to the first USB interface (the keyboard intf).
So we need hid-ite to handle the first (keyboard) USB interface and have
it NOT bind to the second (mouse) USB interface so that that can be
handled by hid-multitouch.c and we get proper multi-touch support.
This commit changes the hid_device_id for the SW5-012 keyboard dock to
only match on hid devices from the HID_GROUP_GENERIC group, this way
hid-ite will not bind the the mouse/multi-touch interface which has
HID_GROUP_MULTITOUCH_WIN_8 as group.
This fixes the regression to mouse-emulation mode introduced by adding
the keyboard dock USB id.
Cc: stable@vger.kernel.org
Fixes: 8f18eca9eb ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock")
Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes
-----BEGIN PGP SIGNATURE-----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=oFrI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Davbe Airlie:
"This is the main pull request for graphics for 5.6. Usual selection of
changes all over.
I've got one outstanding vmwgfx pull that touches mm so kept it
separate until after all of this lands. I'll try and get it to you
soon after this, but it might be early next week (nothing wrong with
code, just my schedule is messy)
This also hits a lot of fbdev drivers with some cleanups.
Other notables:
- vulkan timeline semaphore support added to syncobjs
- nouveau turing secureboot/graphics support
- Displayport MST display stream compression support
Detailed summary:
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes"
* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
drm/nouveau/acr: return error when registering LSF if ACR not supported
drm/nouveau/disp/gv100-: not all channel types support reporting error codes
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
drm/nouveau: support synchronous pushbuf submission
drm/nouveau: signal pending fences when channel has been killed
drm/nouveau: reject attempts to submit to dead channels
drm/nouveau: zero vma pointer even if we only unreference it rather than free
drm/nouveau: Add HD-audio component notifier support
drm/nouveau: fix build error without CONFIG_IOMMU_API
drm/nouveau/kms/nv04: remove set but not used variable 'width'
drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
drm/nouveau/mmu: fix comptag memory leak
drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
drm/exynos: Rename Exynos to lowercase
drm/exynos: change callback names
drm/mst: Don't do atomic checks over disabled managers
drm/amdgpu: add the lost mutex_init back
drm/amd/display: skip opp blank or unblank if test pattern enabled
...
In the HID++ 2.0 function getBatteryInfo() from the BatteryVoltage
(0x1001) feature, chargeStatus is only valid if extPower is active.
Previously we were ignoring extPower, which resulted in wrong values.
Example:
With an unplugged mouse
$ cat /sys/class/power_supply/hidpp_battery_0/status
Charging
This patch fixes that, it also renames charge_sts to flags as
charge_sts can be confused with chargeStatus from the spec.
Spec:
+--------+-------------------------------------------------------------------------+
| byte | 2 |
+--------+--------------+------------+------------+----------+----------+----------+
| bit | 0..2 | 3 | 4 | 5 | 6 | 7 |
+--------+--------------+------------+------------+----------+----------+----------+
| buffer | chargeStatus | fastCharge | slowCharge | critical | (unused) | extPower |
+--------+--------------+------------+------------+----------+----------+----------+
Table 1 - battery voltage (0x1001), getBatteryInfo() (ASE 0), 3rd byte
+-------+--------------------------------------+
| value | meaning |
+-------+--------------------------------------+
| 0 | Charging |
+-------+--------------------------------------+
| 1 | End of charge (100% charged) |
+-------+--------------------------------------+
| 2 | Charge stopped (any "normal" reason) |
+-------+--------------------------------------+
| 7 | Hardware error |
+-------+--------------------------------------+
Table 2 - chargeStatus value
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Tested-by: Pedro Vanzella <pedro@pedrovanzella.com>
Reviewed-by: Pedro Vanzella <pedro@pedrovanzella.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
'hid_hw_stop()' is already in the error handling path when branching to
the 'hid_hw_open_fail' label.
There is no point in calling it twice, so remove one.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidraw and uhid device nodes are always available for writing so we should
always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when
there is nothing to read.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: be54e7461f ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll")
Fixes: 9f3b61dc1d ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.
When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added Tiger Lake PCI device ID to the supported device list.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
1002 if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) {
1003 struct input_mt_slot *i_slot = &mt->slots[slotnum];
1004
1005 if (input_mt_is_active(i_slot) &&
1006 input_mt_is_used(mt, i_slot))
1007 return -EAGAIN;
1008 }
We previously assumed 'mt' could be null (see line 1002).
The following situation is similar, so add a judgement.
Signed-off-by: Pan Zhang <zhangpan26@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Newer Logitech mice report their battery voltage through feature 0x1001
instead of the battery levels through feature 0x1000.
When the device is brought up and we try to query the battery, figure
out if it supports the old or the new feature. If it supports the new
feature, record the feature index and read the battery voltage and
its charge status. The device will respond with three bytes: the first
two are its voltage, and the last one is a bitset, reporting if the
battery is charging, fast or slow, in critical level or discharging.
If everything went correctly, record the fact that we're capable
of querying battery voltage.
Note that the protocol only gives us the current voltage in mV.
We store that as-is, but when queried, we report it in uV as
expected by sysfs.
Like we do for other ways of interacting with the battery for other
devices, refresh the battery status and notify the power supply
subsystem of the changes in voltage and status.
Since there are no known devices which implement both the old and the
new battery feature, we make sure to try the newer feature first and
only fall back to the old one if that fails.
Signed-off-by: Pedro Vanzella <pedro@pedrovanzella.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patch adds support for the Logitech MX Master 3 Mouse using the
Logitech Unifying Receiver and Bluetooth LE.
Signed-off-by: Adrian Freund <adrian@freund.io>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patch allows hidpp_report_is_connect_event to support
WirelessDeviceStatus connect events.
The WirelessDeviceStatus feature index is stored in hidpp_device when
probed. The connect event's fap feature_index is compared against it if the
device supports it.
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patch allows short reports to be translated into long reports.
hidpp_validate_device now returns a u8 instead of a bool which represents
the supported reports. The corresponding bits (i.e.
HIDPP_REPORT_*_SUPPORTED) are set if an HID++ report is supported.
If a short report is being sent and the device does not support it, it is
instead sent as a long report.
This patch also introduces support for the MX Master (b01e and b012).
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
A new PID is in use for repaired MobileStudio Pro devices. Add it to the
list of devices that need special-casing in wacom_wac_pad_event.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add Comet Lake H into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The open method of hiddev handler fails to bring the device out of
autosuspend state as was promised in 0361a28d3f, as it actually has 2
blocks that try to start the transport (call hid_hw_open()) with both
being guarded by the "open" counter, so the 2nd block is never executed as
the first block increments the counter so it is never at 0 when we check
it for the second block.
Additionally hiddev_open() was leaving counter incremented on errors,
causing the device to never be reopened properly if there was ever an
error.
Let's fix all of this by factoring out code that creates client structure
and powers up the device into a separate function that is being called
from usbhid_open() with the "existancelock" being held.
Fixes: 0361a28d3f ("HID: autosuspend support for USB HID")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
We should not be leaving half-mapped usages with potentially invalid
keycodes, as that may confuse hidinput_find_key() when the key is located
by index, which may end up feeding way too large keycode into the VT
keyboard handler and cause OOB write there:
BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
input_pass_values drivers/input/input.c:949 [inline]
input_set_keycode+0x290/0x320 drivers/input/input.c:954
evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
evdev_do_ioctl drivers/input/evdev.c:1150 [inline]
Cc: stable@vger.kernel.org
Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
At least on a T100HA an Asus vendor-page usage-code 0xff event is send on
every suspend and again on resume, resulting in the following warning:
asus 0003:0B05:1807.0002: Unmapped Asus vendor usagepage code 0xff
being logged twice on every suspend/resume.
This commit silences the "Unmapped Asus vendor usagepage code ..."
warning for usage-code 0xff to avoid these warnings being logged.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad
which is connected to an ITE 8595 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without the quirk, joystick shows up as single controller
for both first and second player pads/pins.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for reading out the uniq information from the underlying HID
device. This might be the iSerialNumber in case of USB or the BD_ADDR in
case of Bluetooth.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The syzbot fuzzer found a slab-out-of-bounds bug in the HID report
handler. The bug was caused by a report descriptor which included a
field with size 12 bits and count 4899, for a total size of 7349
bytes.
The usbhid driver uses at most a single-page 4-KB buffer for reports.
In the test there wasn't any problem about overflowing the buffer,
since only one byte was received from the device. Rather, the bug
occurred when the HID core tried to extract the data from the report
fields, which caused it to try reading data beyond the end of the
allocated buffer.
This patch fixes the problem by rejecting any report whose total
length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow
for a possible report index). In theory a device could have a report
longer than that, but if there was such a thing we wouldn't handle it
correctly anyway.
Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add multitouch support for LG MELF I2C touchscreen.
Apply the same workaround as LG USB touchscreen.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When polling a connected /dev/hidrawX device, it is useful to get the
EPOLLOUT when writing is possible. Since writing is possible as soon as
the device is connected, always return it.
Right now EPOLLOUT is only returned when there are also input reports
are available. This works if devices start sending reports when
connected, but some HID devices might need an output report first before
sending any input reports. This change will allow using EPOLLOUT here as
well.
Fixes: 378b80370a ("hidraw: Return EPOLLOUT from hidraw_poll")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- Support for Logitech G15 (Hans de Goede)
- HID parser improvements, improving support for some devices; e.g.
Windows Precision Touchpad, products from Primax, etc. (Blaž
Hrastnik, Candle Sun)
- robustification of tablet mode support in google-whiskers driver
(Dmitry Torokhov)
- assorted small fixes, device-specific quirks and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits)
HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
HID: quirks: remove hid-led devices from hid_have_special_driver
HID: Improve Windows Precision Touchpad detection.
HID: i2c-hid: Reset ALPS touchpads on resume
HID: i2c-hid: fix no irq after reset on raydium 3118
HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
HID: i2c-hid: remove orphaned member sleep_delay
HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
HID: core: check whether Usage Page item is after Usage ID items
HID: intel-ish-hid: Spelling s/diconnect/disconnect/
HID: google: Detect base folded usage instead of hard-coding whiskers
HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry
HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs
HID: lg-g15: Add support for controlling the G510's RGB backlight
HID: lg-g15: Add support for the G510 keyboards' gaming keys
HID: lg-g15: Add support for the M1-M3 and MR LEDs
HID: lg-g15: Add keyboard and LCD backlight control
HID: Add driver for Logitech gaming keyboards (G15, G15 v2)
Input: Add event-codes for macro keys found on various keyboards
HID: hidraw: replace printk() with corresponding pr_xx() variant
...
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
- Hibernation support (Dexuan Cui).
- Latency testing framework (Branden Bonaby).
- Decoupling Hyper-V page size from guest page size (Himadri Pandya).
-----BEGIN PGP SIGNATURE-----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=oJGE
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
During the suspend process and resume process, if there is any mouse
event, there is a small chance the suspend and the resume process can be
aborted because of mousevsc_on_receive() -> pm_wakeup_hard_event().
This behavior can be avoided by disabling the Hyper-V mouse device as
a wakeup source:
echo disabled > /sys/bus/vmbus/drivers/hid_hyperv/XXX/power/wakeup
(XXX is the device's GUID).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In the event that the RMI device is unreachable, the calls to rmi_set_mode() or
rmi_set_page() will fail before registering the RMI transport device. When the
device is removed, rmi_remove() will call rmi_unregister_transport_device()
which will attempt to access the rmi_dev pointer which was not set.
This patch adds a check of the RMI_STARTED bit before calling
rmi_unregister_transport_device(). The RMI_STARTED bit is only set
after rmi_register_transport_device() completes successfully.
The kernel oops was reported in this message:
https://www.spinics.net/lists/linux-input/msg58433.html
[jkosina@suse.cz: reworded changelog as agreed with Andrew]
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Federico Cerutti <federico@ceres-c.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since e04a0442d3 ("HID: core: remove the absolute need of
hid_have_special_driver[]") it's no longer needed to list these LED
devices in hid_have_special_driver[]. This allows libraries needing
access to the hidraw device to work properly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Commit 52cf93e63e ("HID: i2c-hid: Don't reset device upon system
resume") fixes many touchpads and touchscreens, however ALPS touchpads
start to trigger IRQ storm after system resume.
Since it's total silence from ALPS, let's bring the old behavior back
to ALPS touchpads.
Fixes: 52cf93e63e ("HID: i2c-hid: Don't reset device upon system resume")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On some ThinkPad L390 some raydium 3118 touchscreen devices
doesn't response any data after reset, but some does.
Add this ID to no irq quirk,
then don't wait for any response alike on these touchscreens.
All kinds of raydium 3118 devices work fine.
BugLink: https://bugs.launchpad.net/bugs/1849721
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
My Logitech M185 (PID:4038) 2.4 GHz wireless HID++ mouse is causing
intermittent errors like these in the log:
[11091.034857] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[12388.031260] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[16613.718543] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[23529.938728] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
We are already silencing error-code 0x09 (HIDPP_ERROR_RESOURCE_ERROR)
errors in other places, lets do the same in
hidpp20_batterylevel_get_battery_capacity to remove these harmless,
but scary looking errors from the dmesg output.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This was introduced in commit 00b790ea54 ("HID: i2c-hid: Add a small
delay after sleep command for Raydium touchpanel") which has been
effectively reverted by commit 67b18dfb8c ("HID: i2c-hid: Remove
runtime power management").
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The PixArt OEM mouse disconnets/reconnects every minute on
Linux. All contents of dmesg are repetitive:
[ 1465.810014] usb 1-2.2: USB disconnect, device number 20
[ 1467.431509] usb 1-2.2: new low-speed USB device number 21 using xhci_hcd
[ 1467.654982] usb 1-2.2: New USB device found, idVendor=03f0,idProduct=1f4a, bcdDevice= 1.00
[ 1467.654985] usb 1-2.2: New USB device strings: Mfr=1, Product=2,SerialNumber=0
[ 1467.654987] usb 1-2.2: Product: HP USB Optical Mouse
[ 1467.654988] usb 1-2.2: Manufacturer: PixArt
[ 1467.699722] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1F4A.0012/input/input19
[ 1467.700124] hid-generic 0003:03F0:1F4A.0012: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:05:00.3-2.2/input0
So add HID_QUIRK_ALWAYS_POLL for this one as well.
Test the patch, the mouse is no longer disconnected and there are no
duplicate logs in dmesg.
Reference:
https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Upstream commit 58e7515500 ("HID: core: move Usage Page concatenation
to Main item") adds support for Usage Page item after Usage ID items
(such as keyboards manufactured by Primax).
Usage Page concatenation in Main item works well for following report
descriptor patterns:
USAGE_PAGE (Keyboard) 05 07
USAGE_MINIMUM (Keyboard LeftControl) 19 E0
USAGE_MAXIMUM (Keyboard Right GUI) 29 E7
LOGICAL_MINIMUM (0) 15 00
LOGICAL_MAXIMUM (1) 25 01
REPORT_SIZE (1) 75 01
REPORT_COUNT (8) 95 08
INPUT (Data,Var,Abs) 81 02
-------------
USAGE_MINIMUM (Keyboard LeftControl) 19 E0
USAGE_MAXIMUM (Keyboard Right GUI) 29 E7
LOGICAL_MINIMUM (0) 15 00
LOGICAL_MAXIMUM (1) 25 01
REPORT_SIZE (1) 75 01
REPORT_COUNT (8) 95 08
USAGE_PAGE (Keyboard) 05 07
INPUT (Data,Var,Abs) 81 02
But it makes the parser act wrong for the following report
descriptor pattern(such as some Gamepads):
USAGE_PAGE (Button) 05 09
USAGE (Button 1) 09 01
USAGE (Button 2) 09 02
USAGE (Button 4) 09 04
USAGE (Button 5) 09 05
USAGE (Button 7) 09 07
USAGE (Button 8) 09 08
USAGE (Button 14) 09 0E
USAGE (Button 15) 09 0F
USAGE (Button 13) 09 0D
USAGE_PAGE (Consumer Devices) 05 0C
USAGE (Back) 0a 24 02
USAGE (HomePage) 0a 23 02
LOGICAL_MINIMUM (0) 15 00
LOGICAL_MAXIMUM (1) 25 01
REPORT_SIZE (1) 75 01
REPORT_COUNT (11) 95 0B
INPUT (Data,Var,Abs) 81 02
With Usage Page concatenation in Main item, parser recognizes all the
11 Usages as consumer keys, it is not the HID device's real intention.
This patch checks whether Usage Page is really defined after Usage ID
items by comparing usage page using status.
Usage Page concatenation on currently defined Usage Page will always
do in local parsing when Usage ID items encountered.
When Main item is parsing, concatenation will do again with last
defined Usage Page if this page has not been used in the previous
usages concatenation.
Signed-off-by: Candle Sun <candle.sun@unisoc.com>
Signed-off-by: Nianfu Bai <nianfu.bai@unisoc.com>
Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
"Two fixes for the HID subsystem:
- regression fix for i2c-hid power management (Hans de Goede)
- signed vs unsigned API fix for Wacom driver (Jason Gerecke)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: generic: Treat serial number and related fields as unsigned
HID: i2c-hid: Send power-on command after reset
The HID descriptors for most Wacom devices oddly declare the serial
number and other related fields as signed integers. When these numbers
are ingested by the HID subsystem, they are automatically sign-extended
into 32-bit integers. We treat the fields as unsigned elsewhere in the
kernel and userspace, however, so this sign-extension causes problems.
In particular, the sign-extended tool ID sent to userspace as ABS_MISC
does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
We introduce a function 'wacom_s32tou' that can undo the automatic sign
extension performed by 'hid_snto32'. We call this function when processing
the serial number and related fields to ensure that we are dealing with
and reporting the unsigned form. We opt to use this method rather than
adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
more robust in the face of future devices.
Ref: https://github.com/linuxwacom/input-wacom/issues/134
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Before commit 67b18dfb8c ("HID: i2c-hid: Remove runtime power
management"), any i2c-hid touchscreens would typically be runtime-suspended
between the driver loading and Xorg or a Wayland compositor opening it,
causing it to be resumed again. This means that before this change,
we would call i2c_hid_set_power(OFF), i2c_hid_set_power(ON) before the
graphical session would start listening to the touchscreen.
It turns out that at least some SIS touchscreens, such as the one found
on the Asus T100HA, need a power-on command after reset, otherwise they
will not send any events.
Fixes: 67b18dfb8c ("HID: i2c-hid: Remove runtime power management")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- HID++ device support regression fixes (race condition during cleanup,
device detection fix, opps fix) from Andrey Smirnov
- disable PM on i2c-hid, as it's causing problems with a lot of
devices; other OSes apparently don't implement/enable it either; from
Kai-Heng Feng
- error handling fix in intel-ish driver, from Zhang Lixu
- syzbot fuzzer fix for HID core code from Alan Stern
- a few other tiny fixups (printk message cleanup, new device ID)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: i2c-hid: add Trekstor Primebook C11B to descriptor override
HID: logitech-hidpp: do all FF cleanup in hidpp_ff_destroy()
HID: logitech-hidpp: rework device validation
HID: logitech-hidpp: split g920_get_config()
HID: i2c-hid: Remove runtime power management
HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring()
HID: google: add magnemite/masterball USB ids
HID: Fix assumption that devices have inputs
HID: prodikeys: make array keys static const, makes object smaller
HID: fix error message in hid_open_report()
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Each of these drivers has a copy of the same trivial helper function to
convert the pointer argument and then call the native ioctl handler.
We now have a generic implementation of that, so use it.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Primebook C11B uses the SIPODEV SP1064 touchpad. There are 2 versions
of this 2-in-1 and the touchpad in the older version does not supply
descriptors, so it has to be added to the override list.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
All of the FF-related resources belong to corresponding FF device, so
they should be freed as a part of hidpp_ff_destroy() to avoid
potential race condidions.
Fixes: ff21a635dd ("HID: logitech-hidpp: Force feedback support for the Logitech G920")
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Austin Palmer <austinp@valvesoftware.com>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
G920 device only advertises REPORT_ID_HIDPP_LONG and
REPORT_ID_HIDPP_VERY_LONG in its HID report descriptor, so querying
for REPORT_ID_HIDPP_SHORT with optional=false will always fail and
prevent G920 to be recognized as a valid HID++ device.
To fix this and improve some other aspects, modify
hidpp_validate_device() as follows:
- Inline the code of hidpp_validate_report() to simplify
distingushing between non-present and invalid report descriptors
- Drop the check for id >= HID_MAX_IDS || id < 0 since all of our
IDs are static and known to satisfy that at compile time
- Change the algorithms to check all possible report
types (including very long report) and deem the device as a valid
HID++ device if it supports at least one
- Treat invalid report length as a hard stop for the validation
algorithm, meaning that if any of the supported reports has
invalid length we assume the worst and treat the device as a
generic HID device.
- Fold initialization of hidpp->very_long_report_length into
hidpp_validate_device() since it already fetches very long report
length and validates its value
Fixes: fe3ee1ec00 ("HID: logitech-hidpp: allow non HID++ devices to be handled by this module")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204191
Reported-by: Sam Bazely <sambazley@fastmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Austin Palmer <austinp@valvesoftware.com>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Runtime power management in i2c-hid brings lots of issues, such as:
- When transitioning from display manager to desktop session, i2c-hid
was closed and opened, so the device was set to SLEEP and ON in a short
period. Vendors confirmed that their devices can't handle fast ON/SLEEP
command because Windows doesn't have this behavior.
- When rebooting, i2c-hid was closed, and the driver core put the device
back to full power before shutdown. This behavior also triggers a quick
SLEEP and ON commands that some devices can't handle, renders an
unusable touchpad after reboot.
- Most importantly, my power meter reports little to none energy saving
when i2c-hid is runtime suspended.
So let's remove runtime power management since there is no actual
benefit.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Some other hammer-like device will emit a similar code, let's look for
the folded event in HID usage table, instead of hard-coding whiskers
in many places.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 97b741aba9 ("HID: lg-g15: Add keyboard and LCD backlight control")
makes the hid-lg15 kernel module, which gets configured through config
HID_LOGITECH depends on symbols from the led class. Add a depends on
LEDS_CLASS to HID_LOGITECH to avoid undefined reference errors on the
led class symbols.
Fixes: 97b741aba9 ("HID: lg-g15: Add keyboard and LCD backlight control")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The syzbot fuzzer found a slab-out-of-bounds write bug in the hid-gaff
driver. The problem is caused by the driver's assumption that the
device must have an input report. While this will be true for all
normal HID input devices, a suitably malicious device can violate the
assumption.
The same assumption is present in over a dozen other HID drivers.
This patch fixes them by checking that the list of hid_inputs for the
hid_device is nonempty before allowing it to be used.
Reported-and-tested-by: syzbot+403741a091bf41d4ae79@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add support for controlling the LEDs below the M1-M3 and MR keys
on the G510.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Note that the keyboard has a backlight on/off toggle button. If the
backlight is turned off through that button, then any changes we make
will be ignored and we cannot turn it back on again from the host.
To workaround this we write the last set RGB values when we receive an
event indicating that the backlight has been turned on again.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the gaming and LCD menu keys on the G510 keyboard.
Note this commit does not add support for the keyboard and LCD backlight
and the status LEDs, this is done in a follow up commit.
Note the G510 generates 4 different input reports on its second
(Consumer Keys) interface:
-input report 1 is standard bootclass keyboard input report, mirroring
normal keyboard interface
-input report 2 is consumer page keys
-input report 3 is gkeys, etc.
-input report 4 is LED status, single byte, bits:
bit 2: kbd and LCD backlight is *off* when set, toggled by the light key
bit 3: headphone mute LED
bit 4: mic mute LED
Input-report 1 we ignore since this is a duplicate report from the first
interface, report 2 is handled by the regular hid-input code. In this
commit we add handling for input report 3.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for controlling the LEDs below the M1-M3 and MR keys.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Register a led_classdev for the keyboard backlight and another one for
the LCD backlight.
This commit also includes LED_BRIGHT_HW_CHANGED support, which together
with a desktop-environment which supports this, such as GNOME3 leads to
the kbd-backlight OSD being show with the new level when changing the
backlight setting through the hotkey on the keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a driver to stop the extra "G" keys from sending F1 - F12 instead
making them send KEY_GKEY# and also make the non-functional M1 - M3 and MR
keys and the non-functional buttons below the LCD panel properly generated
key events.
Note the connect_mask and gkeys_settings_output_report variables may seem
unnecessary since they are always set to the same value, these are there in
preparation of adding support for the G, M and LCD keys on the G510 kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Simplify the ring buffer handling with the in-place API.
Also avoid the dynamic allocation and the memory leak in the channel
callback function.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit replaces direct invocations of printk with
their appropriate pr_info/warn() variant.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Don't populate the array keys on the stack but instead make it
static const. Makes the object code smaller by 166 bytes.
Before:
text data bss dec hex filename
18931 5872 480 25283 62c3 drivers/hid/hid-prodikeys.o
After:
text data bss dec hex filename
18669 5968 480 25117 621d drivers/hid/hid-prodikeys.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On HID report descriptor parsing error the code displays bogus
pointer instead of error offset (subtracts start=NULL from end).
Make the message more useful by displaying correct error offset
and include total buffer size for reference.
This was carried over from ancient times - "Fixed" commit just
promoted the message from DEBUG to ERROR.
Cc: stable@vger.kernel.org
Fixes: 8c3d52fc39 ("HID: make parser more verbose about parsing errors by default")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When we receive "keyboard position" event from Whiskers we can
conclude that the base is attached, even if we did not get EC event
for that. We may miss EC event because there are some units which
have a lot of leakage on the ADC pins that the EC uses to determine
whether or not a base is attached.
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, the tablet mode switch that takes two signals as its input:
base attached switch from the EC and some GMR signal from whiskers when
it's folded over. This tablet mode switch is then sent to Chrome, which
changes the UI.
However, there are some units which have a lot of leakage on the ADC
pins that the EC uses to determine whether or not a base is attached.
This can result in the base being physically detached, but the EC
thinking that it's still attached. The user would then be stuck in
laptop mode and wouldn't be able to rotate their display.
To work around this let's send "tablet mode" signal when we remove HID
interface, which normally happens when we physically disconnect
whiskers.
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The USB interface may get detected before the platform/EC one, so let's
note the state of the base (if we receive event) and use it to correctly
initialize the tablet mode switch state.
Also let's start the HID interface immediately when probing, this will
ensure that we correctly process "base folded" events that may be sent
as we initialize the base. Note that this requires us to add a remove()
function where we stop and close the hardware and switch the LED
registration away from devm interface as we need to make sure that we
destroy the LED instance before we stop the hardware.
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Removal of dependencies on PAGE_SIZE by Maya Nakamura.
- Moving the hyper-v tools/ code into the tools build system by Andy
Shevchenko.
- hyper-v balloon cleanups by Dexuan Cui.
-----BEGIN PGP SIGNATURE-----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=Dk9i
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- first round of vmbus hibernation support (Dexuan Cui)
- remove dependencies on PAGE_SIZE (Maya Nakamura)
- move the hyper-v tools/ code into the tools build system (Andy
Shevchenko)
- hyper-v balloon cleanups (Dexuan Cui)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Resume after fixing up old primary channels
Drivers: hv: vmbus: Suspend after cleaning up hv_sock and sub channels
Drivers: hv: vmbus: Clean up hv_sock channels by force upon suspend
Drivers: hv: vmbus: Suspend/resume the vmbus itself for hibernation
Drivers: hv: vmbus: Ignore the offers when resuming from hibernation
Drivers: hv: vmbus: Implement suspend/resume for VSC drivers for hibernation
Drivers: hv: vmbus: Add a helper function is_sub_channel()
Drivers: hv: vmbus: Suspend/resume the synic for hibernation
Drivers: hv: vmbus: Break out synic enable and disable operations
HID: hv: Remove dependencies on PAGE_SIZE for ring buffer
Tools: hv: move to tools buildsystem
hv_balloon: Reorganize the probe function
hv_balloon: Use a static page for the balloon_up send buffer
Pull HID updates from Jiri Kosina:
- syzbot memory corruption fixes for hidraw, Prodikeys, Logitech and
Sony drivers from Alan Stern and Roderick Colenbrander
- stuck 'fn' key fix for hid-apple from Joao Moreno
- proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian
Henneke
- fixes for handling power management for intel-ish devices with NO_D3
flag set, from Zhang Lixu
- extension of supported usage range for customer page, as some
Logitech devices are actually making use of it. From Olivier Gay.
- hid-multitouch is no longer filtering mice node creation, from
Benjamin Tissoires
- MobileStudio Pro 13 support, from Ping Cheng
- a few other device ID additions and assorted smaller fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: core: fix dmesg flooding if report field larger than 32bit
HID: core: Add printk_once variants to hid_warn() etc
HID: core: reformat and reduce hid_printk macros
HID: prodikeys: Fix general protection fault during probe
HID: wacom: add new MobileStudio Pro 13 support
HID: sony: Fix memory corruption issue on cleanup.
HID: i2c-hid: modify quirks for weida's devices
HID: apple: Fix stuck function keys when using FN
HID: sb0540: add support for Creative SB0540 IR receivers
HID: Add quirk for HP X500 PIXART OEM mouse
HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices fails
hid-logitech-dj: add the new Lightspeed receiver
HID: logitech-dj: add support of the G700(s) receiver
HID: multitouch: add support for the Smart Tech panel
HID: multitouch: do not filter mice nodes
HID: do not call hid_set_drvdata(hdev, NULL) in drivers
HID: wacom: do not call hid_set_drvdata(hdev, NULL)
HID: logitech: Fix general protection fault caused by Logitech driver
HID: hidraw: Fix invalid read in hidraw_ioctl
HID: wacom: support named keys on older devices
...
- support for the Smart Tech panel, from Benjamin Tissoires
- hid-multitouch is no longer filtering mice node creation,
from Benjamin Tissoires
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- extension of supported usage range for customer page, as some Logitech
devices are actually making use of it. From Olivier Gay.
- support for Lightspeed and G700(s) receivers from Filipe Laíns and
Benjamin Tissoires
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Only warn once of oversize hid report value field
On HP spectre x360 convertible the message:
hid-sensor-hub 001F:8087:0AC2.0002: hid_field_extract() called with n (192) > 32! (kworker/1:2)
is continually printed many times per second, crowding out all else.
Protect dmesg by printing the warning only one time.
The size of the hid report field data structure should probably be increased.
The data structure is treated as a u32 in Linux, but an unlimited number
of bits in the USB hid spec, so there is some rearchitecture needed now that
devices are sending more than 32 bits.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
hidp_send_message was changed to return non-zero values on success,
which some other bits did not expect. This caused spurious errors to be
propagated through the stack, breaking some drivers, such as hid-sony
for the Dualshock 4 in Bluetooth mode.
As pointed out by Dan Carpenter, hid-microsoft directly relied on that
assumption as well.
Fixes: 48d9cc9d85 ("Bluetooth: hidp: Let hidp_send_message return number of queued bytes")
Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The syzbot fuzzer provoked a general protection fault in the
hid-prodikeys driver:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline]
RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline]
RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline]
RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836
Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc
48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f
85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b
The problem is caused by the fact that pcmidi_get_output_report() will
return an error if the HID device doesn't provide the right sort of
output report, but pcmidi_set_operational() doesn't bother to check
the return code and assumes the function call always succeeds.
This patch adds the missing check and aborts the probe operation if
necessary.
Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
wacom_wac_pad_event is the only routine we need to update.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The sony driver is not properly cleaning up from potential failures in
sony_input_configured. Currently it calls hid_hw_stop, while hid_connect
is still running. This is not a good idea, instead hid_hw_stop should
be moved to sony_probe. Similar changes were recently made to Logitech
drivers, which were also doing improper cleanup.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This 'SET_PWR_WAKEUP_DEV' quirk only works for weida's devices with pid
0xC300 & 0xC301. Some weida's devices with other pids also need this quirk
now. Use 'HID_ANY_ID' instead of 0xC300 to make all of weida's devices can be
fixed on the power on issue. This modification should be safe since devices
without power on issue will send the power on command only once.
Signed-off-by: HungNien Chen <hn.chen@weidahitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This fixes an issue in which key down events for function keys would be
repeatedly emitted even after the user has raised the physical key. For
example, the driver fails to emit the F5 key up event when going through
the following steps:
- fnmode=1: hold FN, hold F5, release FN, release F5
- fnmode=2: hold F5, hold FN, release F5, release FN
The repeated F5 key down events can be easily verified using xev.
Signed-off-by: Joao Moreno <mail@joaomoreno.com>
Co-developed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add a new hid driver for the Creative SB0540 IR receiver. This receiver
is usually coupled with an RM-1500 or an RM-1800 remote control.
The scrollwheels on the RM-1800 remote are not bound, as they are
labelled for specific audio controls that don't usually exist on most
systems. They can be remapped using standard Linux keyboard
remapping tools.
Signed-off-by: Bastien Nocera <bnocera@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.
Ville Viinikka (viinikv) reported and tested the quirk.
Link: https://github.com/sriemer/fix-linux-mouse issue 15
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org # v4.16+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Define the ring buffer size as a constant expression because it should
not depend on the guest page size.
Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Before this commit dj_probe would exit with an error if the initial
logi_dj_recv_query_paired_devices fails. The initial call may fail
when the receiver is connected through a kvm and the focus is away.
When the call fails this causes 2 problems:
1) dj_probe calls logi_dj_recv_query_paired_devices after calling
hid_device_io_start() so a HID report may have been received in between
and our delayedwork_callback may be running. It seems that the initial
logi_dj_recv_query_paired_devices failure happening with some KVMs triggers
this exact scenario, causing the work-queue to run on free-ed memory,
leading to:
BUG: unable to handle page fault for address: 0000000000001e88
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 257 Comm: kworker/3:3 Tainted: G OE 5.3.0-rc5+ #100
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B150M Pro4S/D3, BIOS P7.10 12/06/2016
Workqueue: events 0xffffffffc02ba200
RIP: 0010:0xffffffffc02ba1bd
Code: e8 e8 13 00 d8 48 89 c5 48 85 c0 74 4c 48 8b 7b 10 48 89 ea b9 07 00 00 00 41 b9 09 00 00 00 41 b8 01 00 00 00 be 10 00 00 00 <48> 8b 87 88 1e 00 00 48 8b 40 40 e8 b3 6b b4 d8 48 89 ef 41 89 c4
RSP: 0018:ffffb760c046bdb8 EFLAGS: 00010286
RAX: ffff935038ea4550 RBX: ffff935046778000 RCX: 0000000000000007
RDX: ffff935038ea4550 RSI: 0000000000000010 RDI: 0000000000000000
RBP: ffff935038ea4550 R08: 0000000000000001 R09: 0000000000000009
R10: 000000000000e011 R11: 0000000000000001 R12: ffff9350467780e8
R13: ffff935046778000 R14: 0000000000000000 R15: ffff935046778070
FS: 0000000000000000(0000) GS:ffff935054e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000001e88 CR3: 000000075a612002 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
0xffffffffc02ba2f7
? process_one_work+0x1b1/0x560
process_one_work+0x234/0x560
worker_thread+0x50/0x3b0
kthread+0x10a/0x140
? process_one_work+0x560/0x560
? kthread_park+0x80/0x80
ret_from_fork+0x3a/0x50
Modules linked in: vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep vfat fat btusb btrtl btbcm btintel bluetooth intel_rapl_msr ecdh_generic rfkill ecc snd_usb_audio snd_usbmidi_lib intel_rapl_common snd_rawmidi mc x86_pkg_temp_thermal intel_powerclamp coretemp iTCO_wdt iTCO_vendor_support mei_wdt mei_hdcp ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_generic crc32_pclmul snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio ghash_clmulni_intel intel_cstate snd_hda_intel snd_hda_codec intel_uncore snd_hda_core snd_hwdep intel_rapl_perf snd_seq snd_seq_device snd_pcm snd_timer intel_wmi_thunderbolt snd e1000e soundcore mxm_wmi i2c_i801 bfq mei_me mei intel_pch_thermal parport_pc parport acpi_pad binfmt_misc hid_lg_g15(E) hid_logitech_dj(E) i915 crc32c_intel i2c_algo_bit drm_kms_helper nvme nvme_core drm wmi video uas usb_storage i2c_dev
CR2: 0000000000001e88
---[ end trace 1d3f8afdcfcbd842 ]---
2) Even if we were to fix 1. by making sure the work is stopped before
failing probe, failing probe is the wrong thing to do, we have
logi_dj_recv_queue_unknown_work to deal with the initial
logi_dj_recv_query_paired_devices failure.
Rather then error-ing out of the probe, causing the receiver to not work at
all we should rely on this, so that the attached devices will get properly
enumerated once the KVM focus is switched back.
Cc: stable@vger.kernel.org
Fixes: 74808f9115 ("HID: logitech-dj: add support for non unifying receivers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patchs adds the new Lightspeed receiver. Currently it seems to only
be used in the G305.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
[bentiss: rebased on top of master]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Both the G700 and the G700s are sharing the same receiver.
Include support for this receiver in hid-logitech-dj so that userspace
can differentiate both.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This panel is not very friendly to us:
it exposes multiple multitouch collections, some of them being of
logical application stylus.
Usually, a device has only one report per application, and that is
what I assumed in commit 8dfe14b3b4 ("HID: multitouch: ditch mt_report_id")
To avoid breaking all working device, add a new class and a new quirk
for that situation.
Reported-and-tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
It was a good idea at the time to not create a mouse node for the
multitouch touchscreens, but:
- touchscreens following the Win 8 protocol should not have this
disturbing mouse node anymore, or if they have, it should be
used for something else (like a joystick attached to the screen)
- touchpads have it, and they should not use it unless there is a bug,
but when the laptop has a trackstick, the data are reported through this
mouse node.
So instead of whitelisting all of the devices that have a need for the
mouse node, just export it.
hid-input.c will append a suffix to it ('Mouse'), so users will eventually
see if something goes wrong.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This is a common pattern in the HID drivers to reset the drvdata. Some
do it properly, some do it only in case of failure.
But, this is actually already handled by driver core, so there is no need
to do it manually.
[for hid-sensor-hub.c]
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[For hid-picolcd_core.c]
Acked-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This is a common pattern in the HID drivers to reset the drvdata.
However, this is actually already handled by driver core, so there
is no need to do it manually.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Some Wacom devices have keys with predefined meanings. However, when
support was originally added for these devices, the codes for these
keys were not available yet. These keys were thus reported with
the numbered KEY_PROG* range.
Some missing key codes were added with commit 4eb220cb35 ("HID:
wacom: generic: add 3 tablet touch keys") and we are now able to
report the proper key codes. We continue to report the original
KEY_PROG codes so as not to break any unknown applications that
may depend on them.
Also, to support the touch key, track its state in the pad report.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Link: https://gitlab.freedesktop.org/libinput/libinput/merge_requests/155
Link: https://github.com/linuxwacom/xf86-input-wacom/pull/46
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Addresses a few issues that were noticed when compiling with non-default
warnings enabled. The trimmed-down warnings in the order they are fixed
below are:
* declaration of 'size' shadows a parameter
* '%s' directive output may be truncated writing up to 5 bytes into a
region of size between 1 and 64
* pointer targets in initialization of 'char *' from 'unsigned char *'
differ in signedness
* left shift of negative value
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The EKR ring claims a range of 0 to 71 but actually reports
values 1 to 72. The ring is used in relative mode so this
change should not affect users.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Fixes: 72b236d602 ("HID: wacom: Add support for Express Key Remote.")
Cc: <stable@vger.kernel.org> # v4.3+
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When calling request_threaded_irq() with a CP2112, the function
cp2112_gpio_irq_startup() is called in a IRQ context.
Therefore we can not sleep, and we can not call
cp2112_gpio_direction_input() there.
Move the call to cp2112_gpio_direction_input() earlier to have a working
driver.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
EHL is a new platform using ishtp solution, add its device id
to support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Distance values reported by 2nd-gen Intuos tablets are on an inverted
scale (0 == far, 63 == near). We need to change them over to a normal
scale before reporting to userspace or else userspace drivers and
applications can get confused.
Ref: https://github.com/linuxwacom/input-wacom/issues/98
Fixes: eda01dab53 ("HID: wacom: Add four new Intuos devices")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The NO_D3 flag would be set if the ISH enter D0i3 in ish_suspend(),
The resume paths can be distinguished by checking the NO_D3 flag.
It's more reasonable than checking the FW status.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For suspend-to-idle, send suspend message and set N0_D3 flag to put
the ISH into D0i3 state.
For suspend-to-mem, disable the DMA bit before ISH entering D3, and
NO_D3 flag is cleared by default, then the ISH would enter D3.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Xiaofei Tan