Commit 2115bb250f ("audit: Use timespec64 to represent audit timestamps")
noted that audit timestamps were not y2038 safe and used a 64-bit
timestamp. In itself, this makes sense but the conversion was from
CURRENT_TIME to ktime_get_real_ts64() which is a heavier call to record
an accurate timestamp which is required in some, but not all, cases. The
impact is that when auditd is running without any rules that all syscalls
have higher overhead. This is visible in the sysbench-thread benchmark as
a 11.5% performance hit. That benchmark is dumb as rocks but it's also
visible in redis as an 8-10% hit on all operations which is of greater
concern. It is somewhat stupid of audit to track syscalls without any
rules related to syscalls but that is how it behaves.
The overhead can be directly measured with perf comparing 4.9 with 4.12
4.9
7.76% sysbench [kernel.vmlinux] [k] __schedule
7.62% sysbench [kernel.vmlinux] [k] _raw_spin_lock
7.37% sysbench libpthread-2.22.so [.] __lll_lock_elision
7.29% sysbench [kernel.vmlinux] [.] syscall_return_via_sysret
6.59% sysbench [kernel.vmlinux] [k] native_sched_clock
5.21% sysbench libc-2.22.so [.] __sched_yield
4.38% sysbench [kernel.vmlinux] [k] entry_SYSCALL_64
4.28% sysbench [kernel.vmlinux] [k] do_syscall_64
3.49% sysbench libpthread-2.22.so [.] __lll_unlock_elision
3.13% sysbench [kernel.vmlinux] [k] __audit_syscall_exit
2.87% sysbench [kernel.vmlinux] [k] update_curr
2.73% sysbench [kernel.vmlinux] [k] pick_next_task_fair
2.31% sysbench [kernel.vmlinux] [k] syscall_trace_enter
2.20% sysbench [kernel.vmlinux] [k] __audit_syscall_entry
.....
0.00% swapper [kernel.vmlinux] [k] read_tsc
4.12
7.84% sysbench [kernel.vmlinux] [k] __schedule
7.05% sysbench [kernel.vmlinux] [k] _raw_spin_lock
6.57% sysbench libpthread-2.22.so [.] __lll_lock_elision
6.50% sysbench [kernel.vmlinux] [.] syscall_return_via_sysret
5.95% sysbench [kernel.vmlinux] [k] read_tsc
5.71% sysbench [kernel.vmlinux] [k] native_sched_clock
4.78% sysbench libc-2.22.so [.] __sched_yield
4.30% sysbench [kernel.vmlinux] [k] entry_SYSCALL_64
3.94% sysbench [kernel.vmlinux] [k] do_syscall_64
3.37% sysbench libpthread-2.22.so [.] __lll_unlock_elision
3.32% sysbench [kernel.vmlinux] [k] __audit_syscall_exit
2.91% sysbench [kernel.vmlinux] [k] __getnstimeofday64
Note the additional overhead from read_tsc which goes from 0% to 5.95%.
This is on a single-socket E3-1230 but similar overheads have been measured
on an older machine which the patch also eliminates.
The patch in question has no explanation as to why a fully-accurate timestamp
is required and is likely an oversight. Using a coarser, but monotically
increasing, timestamp the overhead can be eliminated. While it can be
worked around by configuring or disabling audit, it's tricky enough to
detect that a kernel fix is justified. With this patch, we see the following;
sysbenchthread
4.9.0 4.12.0 4.12.0
vanilla vanilla coarse-v1r1
Amean 1 1.49 ( 0.00%) 1.66 ( -11.42%) 1.51 ( -1.34%)
Amean 3 1.48 ( 0.00%) 1.65 ( -11.45%) 1.50 ( -0.96%)
Amean 5 1.49 ( 0.00%) 1.67 ( -12.31%) 1.51 ( -1.83%)
Amean 7 1.49 ( 0.00%) 1.66 ( -11.72%) 1.50 ( -0.67%)
Amean 12 1.48 ( 0.00%) 1.65 ( -11.57%) 1.52 ( -2.89%)
Amean 16 1.49 ( 0.00%) 1.65 ( -11.13%) 1.51 ( -1.73%)
The benchmark is reporting the time required for different thread counts to
lock/unlock a private mutex which, while dense, demonstrates the syscall
overhead. This is showing that 4.12 took a 11-12% hit but the overhead is
almost eliminated by the patch. While the variance is not reported here,
it's well within the noise with the patch applied.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
struct timespec is not y2038 safe. Replace
all uses of timespec by y2038 safe struct timespec64.
Even though timespec is used here to represent timeouts,
replace these with timespec64 so that it facilitates
in verification by creating a y2038 safe kernel image
that is free of timespec.
The syscall interfaces themselves are not changed as part
of the patch. They will be part of a different series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull audit updates from Paul Moore:
"Things are relatively quiet on the audit front for v4.13, just five
patches for a total diffstat of 102 lines.
There are two patches from Richard to consistently record the POSIX
capabilities and add the ambient capability information as well.
I also chipped in two patches to fix a race condition with the auditd
tracking code and ensure we don't skip sending any records to the
audit multicast group.
Finally a single style fix that I accepted because I must have been in
a good mood that day.
Everything passes our test suite, and should be relatively harmless,
please merge for v4.13"
* 'stable-4.13' of git://git.infradead.org/users/pcmoore/audit:
audit: make sure we never skip the multicast broadcast
audit: fix a race condition with the auditd tracking code
audit: style fix
audit: add ambient capabilities to CAPSET and BPRM_FCAPS records
audit: unswing cap_* fields in PATH records
Capabilities were augmented to include ambient capabilities in v4.3
commit 58319057b7 ("capabilities: ambient capabilities").
Add ambient capabilities to the audit BPRM_FCAPS and CAPSET records.
The record contains fields "old_pp", "old_pi", "old_pe", "new_pp",
"new_pi", "new_pe" so in keeping with the previous record
normalizations, change the "new_*" variants to simply drop the "new_"
prefix.
A sample of the replaced BPRM_FCAPS record:
RAW: type=BPRM_FCAPS msg=audit(1491468034.252:237): fver=2
fp=0000000000200000 fi=0000000000000000 fe=1 old_pp=0000000000000000
old_pi=0000000000000000 old_pe=0000000000000000 old_pa=0000000000000000
pp=0000000000200000 pi=0000000000000000 pe=0000000000200000
pa=0000000000000000
INTERPRET: type=BPRM_FCAPS msg=audit(04/06/2017 04:40:34.252:237):
fver=2 fp=sys_admin fi=none fe=chown old_pp=none old_pi=none
old_pe=none old_pa=none pp=sys_admin pi=none pe=sys_admin pa=none
A sample of the replaced CAPSET record:
RAW: type=CAPSET msg=audit(1491469502.371:242): pid=833
cap_pi=0000003fffffffff cap_pp=0000003fffffffff cap_pe=0000003fffffffff
cap_pa=0000000000000000
INTERPRET: type=CAPSET msg=audit(04/06/2017 05:05:02.371:242) : pid=833
cap_pi=chown,dac_override,dac_read_search,fowner,fsetid,kill,
setgid,setuid,setpcap,linux_immutable,net_bind_service,net_broadcast,
net_admin,net_raw,ipc_lock,ipc_owner,sys_module,sys_rawio,sys_chroot,
sys_ptrace,sys_pacct,sys_admin,sys_boot,sys_nice,sys_resource,sys_time,
sys_tty_config,mknod,lease,audit_write,audit_control,setfcap,
mac_override,mac_admin,syslog,wake_alarm,block_suspend,audit_read
cap_pp=chown,dac_override,dac_read_search,fowner,fsetid,kill,setgid,
setuid,setpcap,linux_immutable,net_bind_service,net_broadcast,
net_admin,net_raw,ipc_lock,ipc_owner,sys_module,sys_rawio,sys_chroot,
sys_ptrace,sys_pacct,sys_admin,sys_boot,sys_nice,sys_resource,
sys_time,sys_tty_config,mknod,lease,audit_write,audit_control,setfcap,
mac_override,mac_admin,syslog,wake_alarm,block_suspend,audit_read
cap_pe=chown,dac_override,dac_read_search,fowner,fsetid,kill,setgid,
setuid,setpcap,linux_immutable,net_bind_service,net_broadcast,
net_admin,net_raw,ipc_lock,ipc_owner,sys_module,sys_rawio,sys_chroot,
sys_ptrace,sys_pacct,sys_admin,sys_boot,sys_nice,sys_resource,
sys_time,sys_tty_config,mknod,lease,audit_write,audit_control,setfcap,
mac_override,mac_admin,syslog,wake_alarm,block_suspend,audit_read
cap_pa=none
See: https://github.com/linux-audit/audit-kernel/issues/40
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull fsnotify updates from Jan Kara:
"The branch contains mainly a rework of fsnotify infrastructure fixing
a shortcoming that we have waited for response to fanotify permission
events with SRCU read lock held and when the process consuming events
was slow to respond the kernel has stalled.
It also contains several cleanups of unnecessary indirections in
fsnotify framework and a bugfix from Amir fixing leakage of kernel
internal errno to userspace"
* 'fsnotify' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (37 commits)
fanotify: don't expose EOPENSTALE to userspace
fsnotify: remove a stray unlock
fsnotify: Move ->free_mark callback to fsnotify_ops
fsnotify: Add group pointer in fsnotify_init_mark()
fsnotify: Drop inode_mark.c
fsnotify: Remove fsnotify_find_{inode|vfsmount}_mark()
fsnotify: Remove fsnotify_detach_group_marks()
fsnotify: Rename fsnotify_clear_marks_by_group_flags()
fsnotify: Inline fsnotify_clear_{inode|vfsmount}_mark_group()
fsnotify: Remove fsnotify_recalc_{inode|vfsmount}_mask()
fsnotify: Remove fsnotify_set_mark_{,ignored_}mask_locked()
fanotify: Release SRCU lock when waiting for userspace response
fsnotify: Pass fsnotify_iter_info into handle_event handler
fsnotify: Provide framework for dropping SRCU lock in ->handle_event
fsnotify: Remove special handling of mark destruction on group shutdown
fsnotify: Detach mark from object list when last reference is dropped
fsnotify: Move queueing of mark for destruction into fsnotify_put_mark()
inotify: Do not drop mark reference under idr_lock
fsnotify: Free fsnotify_mark_connector when there is no mark attached
fsnotify: Lock object list with connector lock
...
struct timespec is not y2038 safe.
Audit timestamps are recorded in string format into
an audit buffer for a given context.
These mark the entry timestamps for the syscalls.
Use y2038 safe struct timespec64 to represent the times.
The log strings can handle this transition as strings can
hold upto 1024 characters.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently we free fsnotify_mark_connector structure only when inode /
vfsmount is getting freed. This can however impose noticeable memory
overhead when marks get attached to inodes only temporarily. So free the
connector structure once the last mark is detached from the object.
Since notification infrastructure can be working with the connector
under the protection of fsnotify_mark_srcu, we have to be careful and
free the fsnotify_mark_connector only after SRCU period passes.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently notification marks are attached to object (inode or vfsmnt) by
a hlist_head in the object. The list is also protected by a spinlock in
the object. So while there is any mark attached to the list of marks,
the object must be pinned in memory (and thus e.g. last iput() deleting
inode cannot happen). Also for list iteration in fsnotify() to work, we
must hold fsnotify_mark_srcu lock so that mark itself and
mark->obj_list.next cannot get freed. Thus we are required to wait for
response to fanotify events from userspace process with
fsnotify_mark_srcu lock held. That causes issues when userspace process
is buggy and does not reply to some event - basically the whole
notification subsystem gets eventually stuck.
So to be able to drop fsnotify_mark_srcu lock while waiting for
response, we have to pin the mark in memory and make sure it stays in
the object list (as removing the mark waiting for response could lead to
lost notification events for groups later in the list). However we don't
want inode reclaim to block on such mark as that would lead to system
just locking up elsewhere.
This commit is the first in the series that paves way towards solving
these conflicting lifetime needs. Instead of anchoring the list of marks
directly in the object, we anchor it in a dedicated structure
(fsnotify_mark_connector) and just point to that structure from the
object. The following commits will also add spinlock protecting the list
and object pointer to the structure.
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 5b52330bbf ("audit: fix auditd/kernel connection state
tracking") made inlining audit_signal_info() a bit pointless as
it was always calling into auditd_test_task() so let's remove the
inline function in kernel/audit.h and convert __audit_signal_info()
in kernel/auditsc.c into audit_signal_info().
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
What started as a rather straightforward race condition reported by
Dmitry using the syzkaller fuzzer ended up revealing some major
problems with how the audit subsystem managed its netlink sockets and
its connection with the userspace audit daemon. Fixing this properly
had quite the cascading effect and what we are left with is this rather
large and complicated patch. My initial goal was to try and decompose
this patch into multiple smaller patches, but the way these changes
are intertwined makes it difficult to split these changes into
meaningful pieces that don't break or somehow make things worse for
the intermediate states.
The patch makes a number of changes, but the most significant are
highlighted below:
* The auditd tracking variables, e.g. audit_sock, are now gone and
replaced by a RCU/spin_lock protected variable auditd_conn which is
a structure containing all of the auditd tracking information.
* We no longer track the auditd sock directly, instead we track it
via the network namespace in which it resides and we use the audit
socket associated with that namespace. In spirit, this is what the
code was trying to do prior to this patch (at least I think that is
what the original authors intended), but it was done rather poorly
and added a layer of obfuscation that only masked the underlying
problems.
* Big backlog queue cleanup, again. In v4.10 we made some pretty big
changes to how the audit backlog queues work, here we haven't changed
the queue design so much as cleaned up the implementation. Brought
about by the locking changes, we've simplified kauditd_thread() quite
a bit by consolidating the queue handling into a new helper function,
kauditd_send_queue(), which allows us to eliminate a lot of very
similar code and makes the looping logic in kauditd_thread() clearer.
* All netlink messages sent to auditd are now sent via
auditd_send_unicast_skb(). Other than just making sense, this makes
the lock handling easier.
* Change the audit_log_start() sleep behavior so that we never sleep
on auditd events (unchanged) or if the caller is holding the
audit_cmd_mutex (changed). Previously we didn't sleep if the caller
was auditd or if the message type fell between a certain range; the
type check was a poor effort of doing what the cmd_mutex check now
does. Richard Guy Briggs originally proposed not sleeping the
cmd_mutex owner several years ago but his patch wasn't acceptable
at the time. At least the idea lives on here.
* A problem with the lost record counter has been resolved. Steve
Grubb and I both happened to notice this problem and according to
some quick testing by Steve, this problem goes back quite some time.
It's largely a harmless problem, although it may have left some
careful sysadmins quite puzzled.
Cc: <stable@vger.kernel.org> # 4.10.x-
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull audit updates from Paul Moore:
"The audit changes for v4.11 are relatively small compared to what we
did for v4.10, both in terms of size and impact.
- two patches from Steve tweak the formatting for some of the audit
records to make them more consistent with other audit records.
- three patches from Richard record the name of a module on module
load, fix the logging of sockaddr information when using
socketcall() on 32-bit systems, and add the ability to reset
audit's lost record counter.
- my lone patch just fixes an annoying style nit that I was reminded
about by one of Richard's patches.
All these patches pass our test suite"
* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
audit: remove unnecessary curly braces from switch/case statements
audit: log module name on init_module
audit: log 32-bit socketcalls
audit: add feature audit_lost reset
audit: Make AUDIT_ANOM_ABEND event normalized
audit: Make AUDIT_KERNEL event conform to the specification
Pull audit updates from Paul Moore:
"After the small number of patches for v4.9, we've got a much bigger
pile for v4.10.
The bulk of these patches involve a rework of the audit backlog queue
to enable us to move the netlink multicasting out of the task/thread
that generates the audit record and into the kernel thread that emits
the record (just like we do for the audit unicast to auditd).
While we were playing with the backlog queue(s) we fixed a number of
other little problems with the code, and from all the testing so far
things look to be in much better shape now. Doing this also allowed us
to re-enable disabling IRQs for some netns operations ("netns: avoid
disabling irq for netns id").
The remaining patches fix some small problems that are well documented
in the commit descriptions, as well as adding session ID filtering
support"
* 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit:
audit: use proper refcount locking on audit_sock
netns: avoid disabling irq for netns id
audit: don't ever sleep on a command record/message
audit: handle a clean auditd shutdown with grace
audit: wake up kauditd_thread after auditd registers
audit: rework audit_log_start()
audit: rework the audit queue handling
audit: rename the queues and kauditd related functions
audit: queue netlink multicast sends just like we do for unicast sends
audit: fixup audit_init()
audit: move kaudit thread start from auditd registration to kaudit init (#2)
audit: add support for session ID user filter
audit: fix formatting of AUDIT_CONFIG_CHANGE events
audit: skip sessionid sentinel value when auto-incrementing
audit: tame initialization warning len_abuf in audit_log_execve_info
audit: less stack usage for /proc/*/loginuid
The audit event specification asks for certain fields to exist in
all events. Running 'ausearch -m anom_abend -sv yes' returns no
events. This patch adds the result field so that the
AUDIT_ANOM_ABEND event conforms to the rules.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Define AUDIT_SESSIONID in the uapi and add support for specifying user
filters based on the session ID. Also add the new session ID filter
to the feature bitmap so userspace knows it is available.
https://github.com/linux-audit/audit-kernel/issues/4
RFE: add a session ID filter to the kernel's user filter
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: combine multiple patches from Richard into this one]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The value (unsigned int)-1 is used as a sentinel to indicate the
sessionID is unset. Skip this value when the session_id value wraps.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Tame initialization warning of len_abuf in audit_log_execve_info even
though there isn't presently a bug introduced by commit 43761473c2
("audit: fix a double fetch in audit_log_single_execve_arg()"). Using
UNINITIALIZED_VAR instead may mask future bugs.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull audit updates from Paul Moore:
"Another relatively small pull request for v4.9 with just two patches.
The patch from Richard updates the list of features we support and
report back to userspace; this should have been sent earlier with the
rest of the v4.8 patches but it got lost in my inbox.
The second patch fixes a problem reported by our Android friends where
we weren't very consistent in recording PIDs"
* 'stable-4.9' of git://git.infradead.org/users/pcmoore/audit:
audit: add exclude filter extension to feature bitmap
audit: consistently record PIDs with task_tgid_nr()
Unfortunately we record PIDs in audit records using a variety of
methods despite the correct way being the use of task_tgid_nr().
This patch converts all of these callers, except for the case of
AUDIT_SET in audit_receive_msg() (see the comment in the code).
Reported-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull audit updates from Paul Moore:
"Six audit patches for 4.8.
There are a couple of style and minor whitespace tweaks for the logs,
as well as a minor fixup to catch errors on user filter rules, however
the major improvements are a fix to the s390 syscall argument masking
code (reviewed by the nice s390 folks), some consolidation around the
exclude filtering (less code, always a win), and a double-fetch fix
for recording the execve arguments"
* 'stable-4.8' of git://git.infradead.org/users/pcmoore/audit:
audit: fix a double fetch in audit_log_single_execve_arg()
audit: fix whitespace in CWD record
audit: add fields to exclude filter by reusing user filter
s390: ensure that syscall arguments are properly masked on s390
audit: fix some horrible switch statement style crimes
audit: fixup: log on errors from filter user rules
There is a double fetch problem in audit_log_single_execve_arg()
where we first check the execve(2) argumnets for any "bad" characters
which would require hex encoding and then re-fetch the arguments for
logging in the audit record[1]. Of course this leaves a window of
opportunity for an unsavory application to munge with the data.
This patch reworks things by only fetching the argument data once[2]
into a buffer where it is scanned and logged into the audit
records(s). In addition to fixing the double fetch, this patch
improves on the original code in a few other ways: better handling
of large arguments which require encoding, stricter record length
checking, and some performance improvements (completely unverified,
but we got rid of some strlen() calls, that's got to be a good
thing).
As part of the development of this patch, I've also created a basic
regression test for the audit-testsuite, the test can be tracked on
GitHub at the following link:
* https://github.com/linux-audit/audit-testsuite/issues/25
[1] If you pay careful attention, there is actually a triple fetch
problem due to a strnlen_user() call at the top of the function.
[2] This is a tiny white lie, we do make a call to strnlen_user()
prior to fetching the argument data. I don't like it, but due to the
way the audit record is structured we really have no choice unless we
copy the entire argument at once (which would require a rather
wasteful allocation). The good news is that with this patch the
kernel no longer relies on this strnlen_user() value for anything
beyond recording it in the log, we also update it with a trustworthy
value whenever possible.
Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix the whitespace in the CWD record
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
[PM: fixed subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull audit fixes from Paul Moore:
"Two small patches to fix audit problems in 4.7-rcX: the first fixes a
potential kref leak, the second removes some header file noise.
The first is an important bug fix that really should go in before 4.7
is released, the second is not critical, but falls into the very-nice-
to-have category so I'm including in the pull request.
Both patches are straightforward, self-contained, and pass our
testsuite without problem"
* 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit:
audit: move audit_get_tty to reduce scope and kabi changes
audit: move calcs after alloc and check when logging set loginuid
The only users of audit_get_tty and audit_put_tty are internal to
audit, so move it out of include/linux/audit.h to kernel.h and create
a proper function rather than inlining it. This also reduces kABI
changes.
Suggested-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: line wrapped description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move the calculations of values after the allocation in case the
allocation fails. This avoids wasting effort in the rare case that it
fails, but more importantly saves us extra logic to release the tty
ref.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull audit updates from Paul Moore:
"Four small audit patches for 4.7.
Two are simple cleanups around the audit thread management code, one
adds a tty field to AUDIT_LOGIN events, and the final patch makes
tty_name() usable regardless of CONFIG_TTY.
Nothing controversial, and it all passes our regression test"
* 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit:
tty: provide tty_name() even without CONFIG_TTY
audit: add tty field to LOGIN event
audit: we don't need to __set_current_state(TASK_RUNNING)
audit: cleanup prune_tree_thread
The tty field was missing from AUDIT_LOGIN events.
Refactor code to create a new function audit_get_tty(), using it to
replace the call in audit_log_task_info() and to add it to
audit_log_set_loginuid(). Lock and bump the kref to protect it, adding
audit_put_tty() alias to decrement it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Except on SPARC, this is what the code always did. SPARC compat seccomp
was buggy, although the impact of the bug was limited because SPARC
32-bit and 64-bit syscall numbers are the same.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the inode argument of the inode_getsecid hook non-const so that we
can use it to revalidate invalid security labels.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull audit update from Paul Moore:
"This is one of the larger audit patchsets in recent history,
consisting of eight patches and almost 400 lines of changes.
The bulk of the patchset is the new "audit by executable"
functionality which allows admins to set an audit watch based on the
executable on disk. Prior to this, admins could only track an
application by PID, which has some obvious limitations.
Beyond the new functionality we also have some refcnt fixes and a few
minor cleanups"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
fixup: audit: implement audit by executable
audit: implement audit by executable
audit: clean simple fsnotify implementation
audit: use macros for unset inode and device values
audit: make audit_del_rule() more robust
audit: fix uninitialized variable in audit_add_rule()
audit: eliminate unnecessary extra layer of watch parent references
audit: eliminate unnecessary extra layer of watch references
This adds the ability audit the actions of a not-yet-running process.
This patch implements the ability to filter on the executable path. Instead of
just hard coding the ino and dev of the executable we care about at the moment
the rule is inserted into the kernel, use the new audit_fsnotify
infrastructure to manage this dynamically. This means that if the filename
does not yet exist but the containing directory does, or if the inode in
question is unlinked and creat'd (aka updated) the rule will just continue to
work. If the containing directory is moved or deleted or the filesystem is
unmounted, the rule is deleted automatically. A future enhancement would be to
have the rule survive across directory disruptions.
This is a heavily modified version of a patch originally submitted by Eric
Paris with some ideas from Peter Moody.
Cc: Peter Moody <peter@hda3.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: minor whitespace clean to satisfy ./scripts/checkpatch]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Clean up a number of places were casted magic numbers are used to represent
unset inode and device numbers in preparation for the audit by executable path
patch set.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: enclosed the _UNSET macros in parentheses for ./scripts/checkpatch]
Signed-off-by: Paul Moore <pmoore@redhat.com>
The "fix" in commit 0b08c5e594 ("audit: Fix check of return value of
strnlen_user()") didn't fix anything, it broke things. As reported by
Steven Rostedt:
"Yes, strnlen_user() returns 0 on fault, but if you look at what len is
set to, than you would notice that on fault len would be -1"
because we just subtracted one from the return value. So testing
against 0 doesn't test for a fault condition, it tests against a
perfectly valid empty string.
Also fix up the usual braindamage wrt using WARN_ON() inside a
conditional - make it part of the conditional and remove the explicit
unlikely() (which is already part of the WARN_ON*() logic, exactly so
that you don't have to write unreadable code.
Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull audit updates from Paul Moore:
"Four small audit patches for v4.2, all bug fixes. Only 10 lines of
change this time so very unremarkable, the patch subject lines pretty
much tell the whole story"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: Fix check of return value of strnlen_user()
audit: obsolete audit_context check is removed in audit_filter_rules()
audit: fix for typo in comment to function audit_log_link_denied()
lsm: rename duplicate labels in LSM_AUDIT_DATA_TASK audit message type
strnlen_user() returns 0 when it hits fault, not -1. Fix the test in
audit_log_single_execve_arg(). Luckily this shouldn't ever happen unless
there's a kernel bug so it's mostly a cosmetic fix.
CC: Paul Moore <pmoore@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Mikhail Klementyev <jollheef@riseup.net>
[PM: patch applied by hand due to HTML mangling, rewrote subject line]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Pull audit fixes from Paul Moore:
"Seven audit patches for v4.1, all bug fixes.
The largest, and perhaps most significant commit helps resolve some
memory pressure issues related to the inode cache and audit, there are
also a few small commits which help resolve some timing issues with
the audit log queue, and the rest fall into the always popular "code
clean-up" category.
In general, nothing really substantial, just a nice set of maintenance
patches"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: Remove condition which always evaluates to false
audit: reduce mmap_sem hold for mm->exe_file
audit: consolidate handling of mm->exe_file
audit: code clean up
audit: don't reset working wait time accidentally with auditd
audit: don't lose set wait time on first successful call to audit_log_start()
audit: move the tree pruning to a dedicated thread
This patch adds a audit_log_d_path_exe() helper function
to share how we handle auditing of the exe_file's path.
Used by both audit and auditsc. No functionality is changed.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
[PM: tweaked subject line]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull getname/putname updates from Al Viro:
"Rework of getname/getname_kernel/etc., mostly from Paul Moore. Gets
rid of quite a pile of kludges between namei and audit..."
* 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
audit: replace getname()/putname() hacks with reference counters
audit: fix filename matching in __audit_inode() and __audit_inode_child()
audit: enable filename recording via getname_kernel()
simpler calling conventions for filename_mountpoint()
fs: create proper filename objects using getname_kernel()
fs: rework getname_kernel to handle up to PATH_MAX sized filenames
cut down the number of do_path_lookup() callers
In order to ensure that filenames are not released before the audit
subsystem is done with the strings there are a number of hacks built
into the fs and audit subsystems around getname() and putname(). To
say these hacks are "ugly" would be kind.
This patch removes the filename hackery in favor of a more
conventional reference count based approach. The diffstat below tells
most of the story; lots of audit/fs specific code is replaced with a
traditional reference count based approach that is easily understood,
even by those not familiar with the audit and/or fs subsystems.
CC: viro@zeniv.linux.org.uk
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In all likelihood there were some subtle, and perhaps not so subtle,
bugs with filename matching in audit_inode() and audit_inode_child()
for some time, however, recent changes to the audit filename code have
definitely broken the filename matching code. The breakage could
result in duplicate filenames in the audit log and other odd audit
record entries. This patch fixes the filename matching code and
restores some sanity to the filename audit records.
CC: viro@zeniv.linux.org.uk
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Enable recording of filenames in getname_kernel() and remove the
kludgy workaround in __audit_inode() now that we have proper filename
logging for kernel users.
CC: viro@zeniv.linux.org.uk
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull audit fix from Paul Moore:
"One audit patch to resolve a panic/oops when recording filenames in
the audit log, see the mail archive link below.
The fix isn't as nice as I would like, as it involves an allocate/copy
of the filename, but it solves the problem and the overhead should
only affect users who have configured audit rules involving file
names.
We'll revisit this issue with future kernels in an attempt to make
this suck less, but in the meantime I think this fix should go into
the next release of v3.19-rcX.
[ https://marc.info/?t=141986927600001&r=1&w=2 ]"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: create private file name copies when auditing inodes
Unfortunately, while commit 4a928436 ("audit: correctly record file
names with different path name types") fixed a problem where we were
not recording filenames, it created a new problem by attempting to use
these file names after they had been freed. This patch resolves the
issue by creating a copy of the filename which the audit subsystem
frees after it is done with the string.
At some point it would be nice to resolve this issue with refcounts,
or something similar, instead of having to allocate/copy strings, but
that is almost surely beyond the scope of a -rcX patch so we'll defer
that for later. On the plus side, only audit users should be impacted
by the string copying.
Reported-by: Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Pull audit fixes from Paul Moore:
"Four patches to fix various problems with the audit subsystem, all are
fairly small and straightforward.
One patch fixes a problem where we weren't using the correct gfp
allocation flags (GFP_KERNEL regardless of context, oops), one patch
fixes a problem with old userspace tools (this was broken for a
while), one patch fixes a problem where we weren't recording pathnames
correctly, and one fixes a problem with PID based filters.
In general I don't think there is anything controversial with this
patchset, and it fixes some rather unfortunate bugs; the allocation
flag one can be particularly scary looking for users"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: restore AUDIT_LOGINUID unset ABI
audit: correctly record file names with different path name types
audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb
audit: don't attempt to lookup PIDs when changing PID filtering audit rules
There is a problem with the audit system when multiple audit records
are created for the same path, each with a different path name type.
The root cause of the problem is in __audit_inode() when an exact
match (both the path name and path name type) is not found for a
path name record; the existing code creates a new path name record,
but it never sets the path name in this record, leaving it NULL.
This patch corrects this problem by assigning the path name to these
newly created records.
There are many ways to reproduce this problem, but one of the
easiest is the following (assuming auditd is running):
# mkdir /root/tmp/test
# touch /root/tmp/test/567
# auditctl -a always,exit -F dir=/root/tmp/test
# touch /root/tmp/test/567
Afterwards, or while the commands above are running, check the audit
log and pay special attention to the PATH records. A faulty kernel
will display something like the following for the file creation:
type=SYSCALL msg=audit(1416957442.025:93): arch=c000003e syscall=2
success=yes exit=3 ... comm="touch" exe="/usr/bin/touch"
type=CWD msg=audit(1416957442.025:93): cwd="/root/tmp"
type=PATH msg=audit(1416957442.025:93): item=0 name="test/"
inode=401409 ... nametype=PARENT
type=PATH msg=audit(1416957442.025:93): item=1 name=(null)
inode=393804 ... nametype=NORMAL
type=PATH msg=audit(1416957442.025:93): item=2 name=(null)
inode=393804 ... nametype=NORMAL
While a patched kernel will show the following:
type=SYSCALL msg=audit(1416955786.566:89): arch=c000003e syscall=2
success=yes exit=3 ... comm="touch" exe="/usr/bin/touch"
type=CWD msg=audit(1416955786.566:89): cwd="/root/tmp"
type=PATH msg=audit(1416955786.566:89): item=0 name="test/"
inode=401409 ... nametype=PARENT
type=PATH msg=audit(1416955786.566:89): item=1 name="test/567"
inode=393804 ... nametype=NORMAL
This issue was brought up by a number of people, but special credit
should go to hujianyang@huawei.com for reporting the problem along
with an explanation of the problem and a patch. While the original
patch did have some problems (see the archive link below), it did
demonstrate the problem and helped kickstart the fix presented here.
* https://lkml.org/lkml/2014/9/5/66
Reported-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
... for situations when we don't have any candidate in pathnames - basically,
in descriptor-based syscalls.
[Folded the build fix for !CONFIG_AUDITSYSCALL configs from Chen Gang]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull audit updates from Eric Paris:
"So this change across a whole bunch of arches really solves one basic
problem. We want to audit when seccomp is killing a process. seccomp
hooks in before the audit syscall entry code. audit_syscall_entry
took as an argument the arch of the given syscall. Since the arch is
part of what makes a syscall number meaningful it's an important part
of the record, but it isn't available when seccomp shoots the
syscall...
For most arch's we have a better way to get the arch (syscall_get_arch)
So the solution was two fold: Implement syscall_get_arch() everywhere
there is audit which didn't have it. Use syscall_get_arch() in the
seccomp audit code. Having syscall_get_arch() everywhere meant it was
a useless flag on the stack and we could get rid of it for the typical
syscall entry.
The other changes inside the audit system aren't grand, fixed some
records that had invalid spaces. Better locking around the task comm
field. Removing some dead functions and structs. Make some things
static. Really minor stuff"
* git://git.infradead.org/users/eparis/audit: (31 commits)
audit: rename audit_log_remove_rule to disambiguate for trees
audit: cull redundancy in audit_rule_change
audit: WARN if audit_rule_change called illegally
audit: put rule existence check in canonical order
next: openrisc: Fix build
audit: get comm using lock to avoid race in string printing
audit: remove open_arg() function that is never used
audit: correct AUDIT_GET_FEATURE return message type
audit: set nlmsg_len for multicast messages.
audit: use union for audit_field values since they are mutually exclusive
audit: invalid op= values for rules
audit: use atomic_t to simplify audit_serial()
kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0]
audit: reduce scope of audit_log_fcaps
audit: reduce scope of audit_net_id
audit: arm64: Remove the audit arch argument to audit_syscall_entry
arm64: audit: Add audit hook in syscall_trace_enter/exit()
audit: x86: drop arch from __audit_syscall_entry() interface
sparc: implement is_32bit_task
sparc: properly conditionalize use of TIF_32BIT
...
When task->comm is passed directly to audit_log_untrustedstring() without
getting a copy or using the task_lock, there is a race that could happen that
would output a NULL (\0) in the output string that would effectively truncate
the rest of the report text after the comm= field in the audit, losing fields.
Use get_task_comm() to get a copy while acquiring the task_lock to prevent
this and to prevent the result from being a mixture of old and new values of
comm.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Since the arch is found locally in __audit_syscall_entry(), there is no need to
pass it in as a parameter. Delete it from the parameter list.
x86* was the only arch to call __audit_syscall_entry() directly and did so from
assembly code.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-audit@redhat.com
Signed-off-by: Eric Paris <eparis@redhat.com>
---
As this patch relies on changes in the audit tree, I think it
appropriate to send it through my tree rather than the x86 tree.
The AUDIT_SECCOMP record looks something like this:
type=SECCOMP msg=audit(1373478171.953:32775): auid=4325 uid=4325 gid=4325 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0 pid=12381 comm="test" sig=31 syscall=231 compat=0 ip=0x39ea8bca89 code=0x0
In order to determine what syscall 231 maps to, we need to have the arch= field right before it.
To see the event, compile this test.c program:
=====
int main(void)
{
return seccomp_load(seccomp_init(SCMP_ACT_KILL));
}
=====
gcc -g test.c -o test -lseccomp
After running the program, find the record by: ausearch --start recent -m SECCOMP -i
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
signed-off-by: Eric Paris <eparis@redhat.com>
Since every arch should have syscall_get_arch() defined, stop using the
function argument and just collect this ourselves. We do not drop the
argument as fixing some code paths (in assembly) to not pass this first
argument is non-trivial. The argument will be dropped when that is
fixed.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch fix spelling typo found in DocBook/kernel-api.xml.
It is because the file is generated from the source comments,
I have to fix the comments in source codes.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes an easy DoS and possible information disclosure.
This does nothing about the broken state of x32 auditing.
eparis: If the admin has enabled auditd and has specifically loaded
audit rules. This bug has been around since before git. Wow...
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull audit updates from Eric Paris.
* git://git.infradead.org/users/eparis/audit: (28 commits)
AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
audit: do not cast audit_rule_data pointers pointlesly
AUDIT: Allow login in non-init namespaces
audit: define audit_is_compat in kernel internal header
kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
sched: declare pid_alive as inline
audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
syscall_get_arch: remove useless function arguments
audit: remove stray newline from audit_log_execve_info() audit_panic() call
audit: remove stray newlines from audit_log_lost messages
audit: include subject in login records
audit: remove superfluous new- prefix in AUDIT_LOGIN messages
audit: allow user processes to log from another PID namespace
audit: anchor all pid references in the initial pid namespace
audit: convert PPIDs to the inital PID namespace.
pid: get pid_t ppid of task in init_pid_ns
audit: rename the misleading audit_get_context() to audit_take_context()
audit: Add generic compat syscall support
audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
...
The login uid change record does not include the selinux context of the
task logging in. Add that information.
(Updated from 2011-01: RHBZ:670328 -- RGB)
Reported-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: James Morris <jmorris@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Store and log all PIDs with reference to the initial PID namespace and
use the access functions task_pid_nr() and task_tgid_nr() for task->pid
and task->tgid.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
(informed by ebiederman's c776b5d2)
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
sys_getppid() returns the parent pid of the current process in its own pid
namespace. Since audit filters are based in the init pid namespace, a process
could avoid a filter or trigger an unintended one by being in an alternate pid
namespace or log meaningless information.
Switch to task_ppid_nr() for PPIDs to anchor all audit filters in the
init_pid_ns.
(informed by ebiederman's 6c621b7e)
Cc: stable@vger.kernel.org
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
"get" usually implies incrementing a refcount into a structure to indicate a
reference being held by another part of code.
Change this function name to indicate it is in fact being taken from it,
returning the value while clearing it in the supplying structure.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
During an audit event, cache and print the value of the process's
proctitle value (proc/<pid>/cmdline). This is useful in situations
where processes are started via fork'd virtual machines where the
comm field is incorrect. Often times, setting the comm field still
is insufficient as the comm width is not very wide and most
virtual machine "package names" do not fit. Also, during execution,
many threads have their comm field set as well. By tying it back to
the global cmdline value for the process, audit records will be more
complete in systems with these properties. An example of where this
is useful and applicable is in the realm of Android. With Android,
their is no fork/exec for VM instances. The bare, preloaded Dalvik
VM listens for a fork and specialize request. When this request comes
in, the VM forks, and the loads the specific application (specializing).
This was done to take advantage of COW and to not require a load of
basic packages by the VM on very app spawn. When this spawn occurs,
the package name is set via setproctitle() and shows up in procfs.
Many of these package names are longer then 16 bytes, the historical
width of task->comm. Having the cmdline in the audit records will
couple the application back to the record directly. Also, on my
Debian development box, some audit records were more useful then
what was printed under comm.
The cached proctitle is tied to the life-cycle of the audit_context
structure and is built on demand.
Proctitle is controllable by userspace, and thus should not be trusted.
It is meant as an aid to assist in debugging. The proctitle event is
emitted during syscall audits, and can be filtered with auditctl.
Example:
type=AVC msg=audit(1391217013.924:386): avc: denied { getattr } for pid=1971 comm="mkdir" name="/" dev="selinuxfs" ino=1 scontext=system_u:system_r:consolekit_t:s0-s0:c0.c255 tcontext=system_u:object_r:security_t:s0 tclass=filesystem
type=SYSCALL msg=audit(1391217013.924:386): arch=c000003e syscall=137 success=yes exit=0 a0=7f019dfc8bd7 a1=7fffa6aed2c0 a2=fffffffffff4bd25 a3=7fffa6aed050 items=0 ppid=1967 pid=1971 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="mkdir" exe="/bin/mkdir" subj=system_u:system_r:consolekit_t:s0-s0:c0.c255 key=(null)
type=UNKNOWN[1327] msg=audit(1391217013.924:386): proctitle=6D6B646972002D70002F7661722F72756E2F636F6E736F6C65
Acked-by: Steve Grubb <sgrubb@redhat.com> (wrt record formating)
Signed-off-by: William Roberts <wroberts@tresys.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This changes 'do_execve()' to get the executable name as a 'struct
filename', and to free it when it is done. This is what the normal
users want, and it simplifies and streamlines their error handling.
The controlled lifetime of the executable name also fixes a
use-after-free problem with the trace_sched_process_exec tracepoint: the
lifetime of the passed-in string for kernel users was not at all
obvious, and the user-mode helper code used UMH_WAIT_EXEC to serialize
the pathname allocation lifetime with the execve() having finished,
which in turn meant that the trace point that happened after
mm_release() of the old process VM ended up using already free'd memory.
To solve the kernel string lifetime issue, this simply introduces
"getname_kernel()" that works like the normal user-space getname()
function, except with the source coming from kernel memory.
As Oleg points out, this also means that we could drop the tcomm[] array
from 'struct linux_binprm', since the pathname lifetime now covers
setup_new_exec(). That would be a separate cleanup.
Reported-by: Igor Zhbanov <i.zhbanov@samsung.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove spaces between "new", "old" label modifiers and "auid", "ses" labels in
log output since userspace tools can't parse orphaned keywords.
Make variable names more consistent and intuitive.
Make audit_log_format() argument code easier to read.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Right now the sessionid value in the kernel is a combination of u32,
int, and unsigned int. Just use unsigned int throughout.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently when the coredump signals are logged by the audit system, the
actual path to the executable is not logged. Without details of exe, the
system admin may not have an exact idea on what program failed.
This patch changes the audit_log_task() so that the path to the exe is also
logged.
This was copied from audit_log_task_info() and the latter enhanced to avoid
disappearing text fields.
Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The audit_log_abend() is used only by the audit_core_dumps(). Thus there is no
need of maintaining the audit_log_abend() as a separate function.
This patch drops the audit_log_abend() and pushes its functionalities back to
the audit_core_dumps(). Apart from that the "reason" field is also dropped
from being logged since the reason can be deduced from the signal number.
Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
If audit is disabled, we shouldn't generate loginuid audit
log.
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
- Always report the current process as capset now always only works on
the current process. This prevents reporting 0 or a random pid in
a random pid namespace.
- Don't bother to pass the pid as is available.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
(cherry picked from commit bcc85f0af31af123e32858069eb2ad8f39f90e67)
(cherry picked from commit f911cac4556a7a23e0b3ea850233d13b32328692)
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[eparis: fix build error when audit disabled]
Signed-off-by: Eric Paris <eparis@redhat.com>
sfr pointed out that with CONFIG_UIDGID_STRICT_TYPE_CHECKS set the audit
tree would not build. This is because the oldsessionid in
audit_set_loginuid() was accidentally being declared as a kuid_t. This
patch fixes that declaration mistake.
Example of problem:
kernel/auditsc.c: In function 'audit_set_loginuid':
kernel/auditsc.c:2003:15: error: incompatible types when assigning to
type 'kuid_t' from type 'int'
oldsessionid = audit_get_sessionid(current);
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Paris <eparis@redhat.com>
Move the audit_bprm() call from search_binary_handler() to exec_binprm(). This
allows us to get rid of the mm member of struct audit_aux_data_execve since
bprm->mm will equal current->mm.
This also mitigates the issue that ->argc could be modified by the
load_binary() call in search_binary_handler().
audit_bprm() was being called to add an AUDIT_EXECVE record to the audit
context every time search_binary_handler() was recursively called. Only one
reference is necessary.
Reported-by: Oleg Nesterov <onestero@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
This patch is against 3.11, but was developed on Oleg's post-3.11 patches that
introduce exec_binprm().
audit_bprm() was being called to add an AUDIT_EXECVE record to the audit
context every time search_binary_handler() was recursively called. Only one
reference is necessary, so just update it. Move the the contents of
audit_aux_data_execve into the union in audit_context, removing dependence on a
kmalloc along the way.
Reported-by: Oleg Nesterov <onestero@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Get rid of write-only audit_aux_data_exeve structure member envc.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
(cherry picked from ebiederman commit 6904431d6b41190e42d6b94430b67cb4e7e6a4b7)
Signed-off-by: Eric Paris <eparis@redhat.com>
It appears this one comparison function got missed in f368c07d (and 9c937dcc).
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This adds a new 'audit_feature' bit which allows userspace to set it
such that the loginuid is absolutely immutable, even if you have
CAP_AUDIT_CONTROL.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This is a new audit feature which only grants processes with
CAP_AUDIT_CONTROL the ability to unset their loginuid. They cannot
directly set it from a valid uid to another valid uid. The ability to
unset the loginuid is nice because a priviledged task, like that of
container creation, can unset the loginuid and then priv is not needed
inside the container when a login daemon needs to set the loginuid.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
If a task has CAP_AUDIT_CONTROL allow that task to unset their loginuid.
This would allow a child of that task to set their loginuid without
CAP_AUDIT_CONTROL. Thus when launching a new login daemon, a
priviledged helper would be able to unset the loginuid and then the
daemon, which may be malicious user facing, do not need priv to function
correctly.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
After trying to use this feature in Fedora we found the hard coding
policy like this into the kernel was a bad idea. Surprise surprise.
We ran into these problems because it was impossible to launch a
container as a logged in user and run a login daemon inside that container.
This reverts back to the old behavior before this option was added. The
option will be re-added in a userspace selectable manor such that
userspace can choose when it is and when it is not appropriate.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This is just a code rework. It makes things more readable. It does not
make any functional changes.
It does change the log messages to include both the old session id as
well the new and it includes a new res field, which means we get
messages even when the user did not have permission to change the
loginuid.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
If audit_filter_task() nacks the new thread it makes sense
to clear TIF_SYSCALL_AUDIT which can be copied from parent
by dup_task_struct().
A wrong TIF_SYSCALL_AUDIT is not really bad but it triggers
the "slow" audit paths in entry.S to ensure the task can not
miss audit_syscall_*() calls, this is pointless if the task
has no ->audit_context.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The old audit PATH records for mq_open looked like this:
type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
obj=system_u:object_r:tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
...with the audit related changes that went into 3.7, they now look like this:
type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
obj=system_u:object_r:tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"
Both of these look wrong to me. As Steve Grubb pointed out:
"What we need is 1 PATH record that identifies the MQ. The other PATH
records probably should not be there."
Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting. With this change, we get
a single PATH record that looks more like this:
type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
obj=unconfined_u:object_r:user_tmpfs_t:s0
In order to do this, a new audit_inode_parent_hidden() function is
added. If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
audit rule additions containing "-F auid!=4294967295" were failing
with EINVAL because of a regression caused by e1760bd.
Apparently some userland audit rule sets want to know if loginuid uid
has been set and are using a test for auid != 4294967295 to determine
that.
In practice that is a horrible way to ask if a value has been set,
because it relies on subtle implementation details and will break
every time the uid implementation in the kernel changes.
So add a clean way to test if the audit loginuid has been set, and
silently convert the old idiom to the cleaner and more comprehensible
new idiom.
Cc: <stable@vger.kernel.org> # 3.7
Reported-By: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The userspace audit tools didn't like the existing formatting of the
AUDIT_ANOM_LINK event. It needed to be expanded to emit an AUDIT_PATH
event as well, so this implements the change. The bulk of the patch is
moving code out of auditsc.c into audit.c and audit.h for general use.
It expands audit_log_name to include an optional "struct path" argument
for the simple case of just needing to report a pathname. This also
makes
audit_log_task_info available when syscall auditing is not enabled,
since
it is needed in either case for process details.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Steve Grubb <sgrubb@redhat.com>
We have a number of places we were reimplementing the same code to write
out lsm labels. Just do it one darn place.
Signed-off-by: Eric Paris <eparis@redhat.com>
Looks like this one has been around since 5195d8e21:
kernel/auditsc.c: In function ‘audit_free_names’:
kernel/auditsc.c:998: error: ‘i’ undeclared (first use in this function)
...and this warning:
kernel/auditsc.c: In function ‘audit_putname’:
kernel/auditsc.c:2045: warning: ‘i’ may be used uninitialized in this function
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
RHBZ: 785936
If the audit system collects a record about one process sending a signal
to another process it includes in that collection the 'secid' or 'an int
used to represet an LSM label.' If there is no LSM enabled it will
collect a 0. The problem is that when we attempt to print that record
we ask the LSM to convert the secid back to a string. Since there is no
LSM it returns EOPNOTSUPP.
Most code in the audit system checks if the secid is 0 and does not
print LSM info in that case. The signal information code however forgot
that check. Thus users will see a message in syslog indicating that
converting the sid to string failed. Add the right check.
Signed-off-by: Eric Paris <eparis@redhat.com>
> In function audit_alloc_context(), use kzalloc, instead of kmalloc+memset. Patch also renames audit_zero_context() to
> audit_set_context(), to represent it's inner workings properly.
Fair enough. I'd go futher...
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
In function audit_alloc_context(), use kzalloc, instead of kmalloc+memset. Patch also renames audit_zero_context() to
audit_set_context(), to represent it's inner workings properly.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
__audit_socketcall is an extern function.
better to check its parameters by itself.
also can return error code, when fail (find invalid parameters).
also use macro instead of real hard code number
also give related comments for it.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
[eparis: fix the return value when !CONFIG_AUDIT]
Signed-off-by: Eric Paris <eparis@redhat.com>
filename should be destroyed via final_putname() instead of __putname()
Otherwise this result in following BUGON() in case of long names:
kernel BUG at mm/slab.c:3006!
Call Trace:
kmem_cache_free+0x1c1/0x850
audit_putname+0x88/0x90
putname+0x73/0x80
sys_symlinkat+0x120/0x150
sys_symlink+0x16/0x20
system_call_fastpath+0x16/0x1b
Introduced-in: 7950e3852
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
It is useful to extend GID/EGID comparation logic to be able to
match not only the exact EID/EGID values but the group/egroup also.
Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Mel Gorman