Change the return status to error if MMP file size is too large so the
driver load fails early if a large MMP firmware is loaded.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change "sram_visible" to "mmp_sram_size" and compare it with the MMP
size to prevent an overly large MMP file being written to SRAM.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Save the return value of qat_uclo_map_auth_fw() function so that the
function qat_uclo_wr_mimage() could return the correct value.
This way, the procedure of adf_gen2_ae_fw_load() function could stop
and exit properly by checking the return value of qat_uclo_wr_mimage().
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the detection of hangs by setting watchdog timers (WDTs) on
generations that supports that feature.
The default timeout value comes from HW specs. WTDs are reset each time
an accelerator wins arbitration and is able to send/read a command to/from
an accelerator.
The value has added significant margin to make sure there are no spurious
timeouts. The scope of watchdog is per QAT device.
If a timeout is detected, the firmware resets the accelerator and
returns a response descriptor with an appropriate error code.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In adf_create_ring, if the callee adf_init_ring() failed, the callee will
free the ring->base_addr by dma_free_coherent() and return -EFAULT. Then
adf_create_ring will goto err and the ring->base_addr will be freed again
in adf_cleanup_ring().
My patch sets ring->base_addr to NULL after the first freed to avoid the
double free.
Fixes: a672a9dc87 ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_isr_resource_alloc() is not unwinding correctly in case
of error.
This patch fixes the error paths and propagate the errors to the caller.
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.
[ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.180345] Call Trace:
[ 7.182576] mutex_lock+0xc9/0xd0
[ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 25c6ffb249 ("crypto: qat - check if PF is running")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DMA_TO_DEVICE synchronisation must be done after the last modification
of the memory region by the software and before it is handed off to
the device.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'dma_mapping_error' return a negative value if 'dma_addr' is equal to
'DMA_MAPPING_ERROR' not zero, so fix initialization of 'dma_addr'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trivial fix to spelling mistake in adf_pf2vf_msg.c and adf_vf2pf_msg.c.
s/messge/message/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Restrict size of field to what is required by the operation.
This issue was detected by smatch:
drivers/crypto/qat/qat_common/qat_asym_algs.c:328 qat_dh_compute_value() error: dma_map_single_attrs() '&qat_req->in.dh.in.b' too small (8 vs 64)
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cast ADF_SIZE_TO_RING_SIZE_IN_BYTES() so it can return a 64 bit value.
This issue was detected by smatch:
drivers/crypto/qat/qat_common/adf_transport_debug.c:65 adf_ring_show() warn: should '(1 << (ring->ring_size - 1)) << 7' be a 64 bit type?
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sanitize ring_num value coming from configuration (and potentially
from user space) before it is used as index in the banks array.
This issue was detected by smatch:
drivers/crypto/qat/qat_common/adf_transport.c:233 adf_create_ring() warn: potential spectre issue 'bank->rings' [r] (local cap)
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware specific function adf_get_arbiter_mapping() modifies
the static array thrd_to_arb_map to disable mappings for AEs
that are disabled. This static array is used for each device
of the same type. If the ae mask is not identical for all devices
of the same type then the arbiter mapping returned by
adf_get_arbiter_mapping() may be wrong.
This patch fixes this problem by ensuring the static arbiter
mapping is unchanged and the device arbiter mapping is re-calculated
each time based on the static mapping.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use CRYPTO_LIB_AES in place of CRYPTO_AES in the dependences for the QAT
common code.
Fixes: c0e583ab20 ("crypto: qat - add CRYPTO_AES to Kconfig dependencies")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cipher routines in the crypto API are mostly intended for templates
implementing skcipher modes generically in software, and shouldn't be
used outside of the crypto subsystem. So move the prototypes and all
related definitions to a new header file under include/crypto/internal.
Also, let's use the new module namespace feature to move the symbol
exports into a new namespace CRYPTO_INTERNAL.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch includes a missing dependency (CRYPTO_AES) which may
lead to an "undefined reference to `aes_expandkey'" linking error.
Fixes: 5106dfeaea ("crypto: qat - add AES-XTS support for QAT GEN4 devices")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect device capabilities in qat_4xxx driver.
Read fuses and build the device capabilities mask. This will enable
services and handling specific to QAT 4xxx devices.
Co-developed-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com>
Signed-off-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add handling of AES-XTS specific to QAT GEN4 devices.
Co-developed-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com>
Signed-off-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for AES-CTR for QAT GEN4 devices.
Also, introduce the capability ICP_ACCEL_CAPABILITIES_AES_V2 and the
helper macro HW_CAP_AES_V2, which allow to distinguish between
different HW generations.
Co-developed-by: Tomasz Kowalik <tomaszx.kowalik@intel.com>
Signed-off-by: Tomasz Kowalik <tomaszx.kowalik@intel.com>
Co-developed-by: Mateusz Polrola <mateuszx.potrola@intel.com>
Signed-off-by: Mateusz Polrola <mateuszx.potrola@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Condition !A || A && B is equivalent to !A || B.
Generated by: scripts/coccinelle/misc/excluded_middle.cocci
Fixes: b76f0ea013 ("coccinelle: misc: add excluded_middle.cocci script")
CC: Denis Efremov <efremov@linux.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for QAT 4xxx devices.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an hook to initialize the vector routing table with the default
values before MSIx is enabled.
The new function set_msix_rttable() is called only if present in the
struct adf_hw_device_data of the device. This is to allow for QAT
devices that do not support that functionality.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce support for devices that require multiple firmware images.
If a device requires more than a firmware image to operate, load the
image to the appropriate Acceleration Engine (AE).
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the QAT gen4 devices in the firmware loader.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for broadcasting mode in firmware loader to enable the next
generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for shared ustore mode support. This is required by the next
generation of QAT devices to share the same fw image across engines.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce new API, qat_uclo_set_cfg_ae_mask(), to allow the load of the
firmware image to a subset of Acceleration Engines (AEs). This is
required by the next generation of QAT devices to be able to load
different firmware images to the device.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add firmware control unit (FCU) CSRs to chip info so the firmware
authentication code is common between all devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for CSS3K, which uses RSA3K as image signature algorithm,
to support the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use ae_mask to decide which Accelerator Engine (AE) to target in AE
related operations, instead of a sequential loop, to skip AEs that are
fused out.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add null pointer check when freeing the memory for firmware.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add misc control CSR to chip info since the CSR offset will be different
in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the wake up event to chip info since this value will be different
in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add global clock enable CSR to the chip info since the CSR offset
will be different in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add reset CSR offset and mask to chip info since they are different
in new QAT devices. This also simplifies the reset/clrReset functions
by using the reset mask.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the local memory size to the chip info since the size of this memory
will be different in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for local memory lm2 and lm3 which is introduced in the next
generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the next neighbor (NN) capability in chip_info as NN registers
are not supported in certain SKUs of QAT.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify condition in qat_uclo_wr_mimage() to use a capability of the
device (sram_visible), rather than the device ID, so the check is not
specific to devices of the same type.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the chip info structure which contains device specific
information. The initialization path has been split between common and
hardware specific in order to facilitate the introduction of the next
generation hardware.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace long expressions with local variables in the functions
qat_uclo_wr_uimage_page(), qat_uclo_init_globals() and
qat_uclo_init_umem_seg() to improve readability.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Refactor qat_uclo_set_ae_mode() by moving the logic that sets the AE
modes to a separate function, qat_hal_set_modes().
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of ICP_QAT_AE_OFFSET, ICP_QAT_CAP_OFFSET,
LOCAL_TO_XFER_REG_OFFSET and ICP_QAT_EP_OFFSET from qat_hal.c to
icp_qat_hal.h to avoid the definition of generation specific constants
in qat_hal.c.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Include the offset of GLOBAL_CSR directly into the enum hal_global_csr
and remove the macros SET_GLB_CSR/GET_GLB_CSR to simplify the global CSR
access.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the API and the behaviour of the qat_hal_start() function.
With this change, the function starts under the hood all acceleration
engines (AEs) and there is no longer need to call it for each engine.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change micro word data mask since the Acceleration Engine (AE)
instruction codes have been changed in the new generation QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change type for ctx_mask from unsigned char to unsigned long to avoid
type casting.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve the way micro instructions (FW code) are uploaded to Accelerator
Engines (AEs). If code starts at PC zero (absolute addressing), read
uwords with no relative address. Otherwise, use relative addressing to
the page region.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename the function qat_uclo_del_uof_obj() in qat_uclo_del_obj() since
it frees the memory allocated for all firmware objects.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce additional parenthesis to resolve a warninga reported by
checkpatch.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove unnecessary parenthesis across the firmware loader.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change message in error path of qat_uclo_check_image_compat() to report
an incompatible firmware image that contains a neighbor register table.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not mask the AE number with the AE mask when accessing the AE local
CSRs. Bit 12 of the local CSR address is the start of AE number so just
take out the AE mask here.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The return value of qat_hal_rd_ae_csr() is always a CSR value and never
a status and should not be stored in the status variable of
qat_hal_put_rel_rd_xfer().
This removes the assignment as qat_hal_rd_ae_csr() is not expected to
fail.
A more comprehensive handling of the theoretical corner case which could
result in a fail will be submitted in a separate patch.
Fixes: 8c9478a400 ("crypto: qat - reduce stack size with KASAN")
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implement infrastructure for the Multiple Object File (MOF) format
in the firmware loader. This will allow to load a specific firmware
image contained inside an MOF file.
This patch is based on earlier work done by Pingchao Yang.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Jack Xu <jack.xu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change all lower case pci in comments to be upper case PCI.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove cast for mailbox CSR in adf_admin.c as it is not needed.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change type of ae_mask in adf_hw_device_data to allow for devices with
more than 16 Acceleration Engines (AEs).
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow for crypto instances to be configured with symmetric crypto rings
that belong to a bank that is different from the one where asymmetric
crypto rings are located.
This is to allow for devices with banks made of a single ring pair.
In these, crypto instances will be composed of two separate banks.
Changed string literals are not exposed to the user space.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Refactor function qat_crypto_dev_config() to propagate errors to
the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Refactor function qat_crypto_create_instances() to propagate errors to
the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a key is not found in the internal key value storage, return -ENODATA
instead of -1 that is treated as -EPERM and may confuse.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the parameter type provided to adf_cfg_add_key_value_param()
is invalid, return -EINVAL instead of -1 that is treated as -EPERM and
may confuse.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove superfluous casts to void* in function qat_crypto_dev_config().
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call the function configure_iov_threads(), adf_enable_vf2pf_interrupts()
and adf_pf2vf_notify_restarting() only if present in the struct
adf_hw_device_data of the device.
This is to allow for QAT drivers that do not implement those functions.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace hardcoded value of the bank interrupt clear flag mask with a
value calculated on the fly which is based on the number of rings
present in a bank. This is to support devices that have a number of
rings per bank different than 16.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Abstract writes to the service arbiter enable register.
This is in preparation for the introduction of the qat_4xxx driver since
the arbitration enable register differes between QAT GEN2 and QAT GEN4
devices.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace occurrences of the pattern GENMASK_ULL(var - 1, 0)) with
BIT_ULL(var) - 1 since it produces better code and it is easier to read.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace constant 0xFFFFFFFFFFFFFFFFULL with GENMASK_ULL(63, 0) and
0xFFFFFFFF with GENMASK(31, 0) as they are masks.
This makes code less error prone.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Abstract the implementation of BUILD_RING_BASE_ADDR.
This is in preparation for the introduction of the qat_4xxx driver since
the value of the ring base differs between QAT GEN2 and QAT GEN4
devices.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable arbitration on the TX ring only after the RX ring is programmed.
Before this change, arbitration was enabled on the TX ring before the RX
ring was programmed allowing the HW to process a request before having
the ring pair configured.
With this change, the arbitration logic is programmed only if the TX
half of the ring mask matches the RX half.
This change does not affect QAT GEN2 devices (c62x, c3xxx and dh895xcc),
but it is a must for QAT GEN4 devices since the CSRs of the ring pair
are locked after arbitration is enabled on the TX ring.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the function adf_hw_dev_has_crypto() that returns true if a
device supports symmetric crypto, asymmetric crypto and authentication
services.
If a device has crypto capabilities, add crypto instances to the
configuration.
This is done since the function that allows to retrieve crypto
instances, qat_crypto_get_instance_node(), return instances that support
all crypto services.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add logic to detect device capabilities for c62x, c3xxx and dh895xcc.
Read fuses, straps and legfuses CSRs and build the device capabilities
mask. This will be used to understand if a certain service is supported
by a device.
This patch is based on earlier work done by Conor McLoughlin.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The arbiter configuration, the offset to the arbiter config CSR and the
offset to the worker thread to service arbiter CSR are going to be
different in QAT GEN4 devices although the logic that uses them is the
same across all QAT generations.
This patch reworks the gen-specific parts of the arbiter access code by
introducing the arb_info structure, that contains the values that are
generation specific, and a function in the structure adf_hw_device_data,
get_arb_info(), that allows to get them.
Since the arbiter values for QAT GEN2 devices (c62x, c3xxx and
dh895xcc) are the same, a single function, adf_gen2_get_arb_info() is
provided in adf_gen2_hw_data.c and referenced by each QAT GEN2 driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the unused macros ADF_ARB_WTR_SIZE, ADF_ARB_WTR_OFFSET
and ADF_ARB_RO_EN_OFFSET.
These macros were left in commit 34074205bb ("crypto: qat - remove
redundant arbiter configuration") that removed the logic that used those
defines.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
WQCFG registers contain the correct values after reset in all
generations of QAT. No need to write into them.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend admin contansts table to support QAT GEN4 devices.
This change does not affect QAT GEN2 devices (c62x, c3xxx and dh895xcc)
as the table was extended in an unused area which is not referenced by
any of those drivers and devices.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce admin AE mask. If this mask set, the fw constant message is
sent only to engines that belong to that set, otherwise it is sent to
all engines.
This is in preparation for the qat_4xxx driver where the constant message
should be sent only to admin engines.
In GEN2 devices (c62x, c3xxx and dh895xcc), the admin AE mask is 0 and
the fw constants message is sent to all AEs.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call adf_set_fw_constants() before adf_init_ae().
This is required by QAT GEN4 devices, which expect that the
FW_CONSTANTS_CFG command is sent to the admin AEs before the FW_INIT_AE
command.
Swapping the order of the two commands (FW_INIT_AE and FW_CONSTANTS_CFG)
is allowed in QAT GEN2 devices as the firmware can handle those in any
order.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename occurrences of ME in the admin module with the acronym AE
(Acceleration Engine) as the two are equivalent.
This is to keep a single acronym for engined in the codebase and
follow the documentation in https://01.org/intel-quickassist-technology.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add packed attribute to the structures icp_qat_fw_init_admin_req and
icp_qat_fw_init_admin_resp as they are accessed by firmware.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Abstract access to admin interface and move generation specific code into
adf_gen2_hw_data.c in preparation for the introduction of the qat_4xxx
driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move gen2 specific transport macros to adf_gen2_hw_data.c.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Abstract access to transport CSRs and move generation specific code into
adf_gen2_hw_data.c in preparation for the introduction of the qat_4xxx
driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The number of AE2FUNC_MAP registers is different in every QAT device
(c62x, c3xxx and dh895xcc) although the logic and the register offsets
are the same across devices.
This patch separates the logic that configures the iov threads in a
common function that takes as input the number of AE2FUNC_MAP registers
supported by a device. The function is then added to the
adf_hw_device_data structure of each device, and called with the
appropriate parameters.
The configure iov thread logic is added to a new file,
adf_gen2_hw_data.c, that is going to contain code that is shared across
QAT GEN2 devices.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This change is to allow support for QAT devices that may not have 16
rings per bank.
The rings structure in bank is allocated dynamically based on the number
of banks supported by a device.
Note that in the error path in adf_init_bank(), ring->inflights is set
to NULL after the free to silence a false positive double free reported
by clang scan-build.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable acceleration engines (AEs) and accelerators based on soft straps
and fuses. When looping with a number of AEs or accelerators, ignore the
ones that are disabled.
This patch is based on earlier work done by Conor McLoughlin.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do IV update calculations in software for AES-CBC and AES-CTR.
This allows to embed the IV on the request descriptor and removes the
allocation of the IV buffer in the data path.
In addition, this change allows the support of QAT devices that are not
capable of updating the IV buffer when performing an AES-CBC or AES-CTR
operation.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Mateusz Polrola <mateuszx.potrola@intel.com>
Signed-off-by: Mateusz Polrola <mateuszx.potrola@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Indrasena Reddy Gali <indrasena.reddygali@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove unused function qat_dh_get_params().
This is to fix the following warning when compiling the driver with
CC=clang W=1
drivers/crypto/qat/qat_common/qat_asym_algs.c:207:34: warning: unused function 'qat_dh_get_params' [-Wunused-function]
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
Remove pointer to struct pci_driver from function adf_enable_aer() as it
is possible to get it directly from pdev->driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix description of function parameters. This is to fix the following
warnings when compiling the driver with W=1:
drivers/crypto/qat/qat_common/adf_sriov.c:133: warning: Function parameter or member 'numvfs' not described in 'adf_sriov_configure'
drivers/crypto/qat/qat_common/adf_dev_mgr.c:296: warning: Function parameter or member 'pci_dev' not described in 'adf_devmgr_pci_to_accel_dev'
drivers/crypto/qat/qat_common/adf_dev_mgr.c:296: warning: Excess function parameter 'accel_dev' description in 'adf_devmgr_pci_to_accel_dev'
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mutex adf_ctl_lock is initialized statically. It is
unnecessary to initialize by mutex_init().
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Build pci_device_id structure using the PCI_VDEVICE macro.
This removes any references to the ADF_SYSTEM_DEVICE macro.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace device ids defined in the QAT drivers with the ones in
include/linux/pci_ids.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use pci_name() when creating debugfs entries in order to include PCI
domain in the path.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return -EINVAL for authenc(hmac(sha1),cbc(aes)),
authenc(hmac(sha256),cbc(aes)) and authenc(hmac(sha512),cbc(aes))
if the cipher length is not multiple of the AES block.
This is to prevent an undefined device behaviour.
Fixes: d370cec321 ("crypto: qat - Intel(R) QAT crypto interface")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dominik Przychodni <dominik.przychodni@intel.com>
[giovanni.cabiddu@intel.com: reworded commit message]
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
- fix regression in af_alg that affects iwd
- restore polling delay in qat
- fix double free in ingenic on error path
- fix potential build failure in sa2ul due to missing Kconfig dependency
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Work around empty control messages without MSG_MORE
crypto: sa2ul - add Kconfig selects to fix build error
crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc
crypto: qat - add delay before polling mailbox
The mailbox CSR register has a write latency and requires a delay before
being read. This patch replaces readl_poll_timeout with read_poll_timeout
that allows to sleep before read.
The initial sleep was removed when the mailbox poll loop was replaced with
readl_poll_timeout.
Fixes: a79d471c65 ("crypto: qat - update timeout logic in put admin msg")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clang static analysis flags this error
qat_uclo.c:297:3: warning: Attempt to free released memory
[unix.Malloc]
kfree(*init_tab_base);
^~~~~~~~~~~~~~~~~~~~~
When input *init_tab_base is null, the function allocates memory for
the head of the list. When there is problem allocating other list
elements the list is unwound and freed. Then a check is made if the
list head was allocated and is also freed.
Keeping track of the what may need to be freed is the variable 'tail_old'.
The unwinding/freeing block is
while (tail_old) {
mem_init = tail_old->next;
kfree(tail_old);
tail_old = mem_init;
}
The problem is that the first element of tail_old is also what was
allocated for the list head
init_header = kzalloc(sizeof(*init_header), GFP_KERNEL);
...
*init_tab_base = init_header;
flag = 1;
}
tail_old = init_header;
So *init_tab_base/init_header are freed twice.
There is another problem.
When the input *init_tab_base is non null the tail_old is calculated by
traveling down the list to first non null entry.
tail_old = init_header;
while (tail_old->next)
tail_old = tail_old->next;
When the unwinding free happens, the last entry of the input list will
be freed.
So the freeing needs a general changed.
If locally allocated the first element of tail_old is freed, else it
is skipped. As a bit of cleanup, reset *init_tab_base if it came in
as null.
Fixes: b4b7e67c91 ("crypto: qat - Intel(R) QAT ucode part of fw loader")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Forward requests to another provider if the key length for AES-XTS is
192 bits as this is not supported by the QAT accelerators.
This fixes the following issue reported with the option
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:
alg: skcipher: qat_aes_xts setkey failed on test vector "random: len=3204 klen=48"; expected_error=0, actual_error=-22, flags=0x1
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove tfm field in qat_alg_skcipher_ctx structure.
This is not used.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Validate AES-XTS key using the function xts_verify_key() to prevent
malformed keys.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow AES-XTS requests that are not multiple of the block size.
If a request is smaller than the block size, return -EINVAL.
This fixes the following issue reported by the crypto testmgr self-test:
alg: skcipher: qat_aes_xts encryption failed on test vector "random: len=116 klen=64"; expected_error=0, actual_error=-22, cfg="random: inplace may_sleep use_finup src_divs=[<reimport>45.85%@+4077, <flush>54.15%@alignmask+18]"
Fixes: 96ee111a65 ("crypto: qat - return error for block...")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace timeout logic in adf_put_admin_msg_sync() with existing macro
readl_poll_timeout().
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the logic that sends admin messages to be able to target a subset
of Acceleration Engines (AEs) in the device.
In future not all admin messages need to be sent to all the AEs.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch tidies up the definition of init/admin request and response
messages by removing the icp_qat_fw_init_admin_resp_pars structure
and embedding it into icp_qat_fw_init_admin_resp.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove packed attribute in adf_etr_bank_data and adf_etr_ring_data.
Fields in these structures are reordered in order to avoid holes.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel source code should not contain stdint.h types.
This patch replaces uintXX_t types with kernel space ABI types.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel source code should not include stdint.h types.
This patch replaces uintXX_t types with respective ones defined in kernel
headers.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace License Headers with SPDX License Identifiers.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It seems that smp_processor_id() is only used for a best-effort
load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible
to disable preemption for the duration of the crypto requests. Therefore,
just silence the warning. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").
Silences the following splat:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904
caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1
...
Call Trace:
dump_stack+0x5f/0x86
check_preemption_disabled+0xd3/0xe0
qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
skcipher_setkey_ablkcipher+0x2b/0x40
__test_skcipher+0x1f3/0xb20
? cpumask_next_and+0x26/0x40
? find_busiest_group+0x10e/0x9d0
? preempt_count_add+0x49/0xa0
? try_module_get+0x61/0xf0
? crypto_mod_get+0x15/0x30
? __kmalloc+0x1df/0x1f0
? __crypto_alloc_tfm+0x116/0x180
? crypto_skcipher_init_tfm+0xa6/0x180
? crypto_create_tfm+0x4b/0xf0
test_skcipher+0x21/0xa0
alg_test_skcipher+0x3f/0xa0
alg_test.part.6+0x126/0x2a0
? finish_task_switch+0x21b/0x260
? __schedule+0x1e9/0x800
? __wake_up_common+0x8d/0x140
cryptomgr_test+0x40/0x50
kthread+0xff/0x130
? cryptomgr_notify+0x540/0x540
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x24/0x50
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct qat_alg_buf_list {
...
struct qat_alg_buf bufers[];
} __packed __aligned(64);
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(struct qat_alg_buf_list) + ((1 + n) * sizeof(struct qat_alg_buf))
with:
struct_size(bufl, bufers, n + 1)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a zero length request is submitted through the skcipher api,
do not offload it and return success.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return -EINVAL if a request for a block cipher is not multiple of the
size of the block.
This problem was found with by the new extra run-time crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an invalid key is provided as input to the setkey function, the
function always failed returning -ENOMEM rather than -EINVAL.
Furthermore, if setkey was called multiple times with an invalid key,
the device instance was getting leaked.
This patch fixes the error paths in the setkey functions by returning
the correct error code in case of error and freeing all the resources
allocated in this function in case of failure.
This problem was found with by the new extra run-time crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The block size for aes counter mode was improperly set to AES_BLOCK_SIZE.
This sets it to 1 as it is a stream cipher.
This problem was found with by the new extra run-time crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate a contiguous buffer and instruct the qat hardware to return the
iv at the end of an encryption or decryption operation.
The iv is copied to the array provided by the user in the callback
function.
This problem was found with by the crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The offset is calculated based on type of hash algorithum.
If the algorithum is invalid the offset can have negative value.
Hence added negative offset check and return -EFAULT.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Shant KumarX Sonnad <shant.kumarx.sonnad@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.
With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.
Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.
Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for new akcipher verify call remove sign/verify callbacks
from RSA backends and make PKCS1 driver call encrypt/decrypt instead.
This also complies with the well-known idea that raw RSA should never be
used for sign/verify. It only should be used with proper padding scheme
such as PKCS1 driver provides.
Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: qat-linux@intel.com
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto update from Herbert Xu:
"API:
- Add helper for simple skcipher modes.
- Add helper to register multiple templates.
- Set CRYPTO_TFM_NEED_KEY when setkey fails.
- Require neither or both of export/import in shash.
- AEAD decryption test vectors are now generated from encryption
ones.
- New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random
fuzzing.
Algorithms:
- Conversions to skcipher and helper for many templates.
- Add more test vectors for nhpoly1305 and adiantum.
Drivers:
- Add crypto4xx prng support.
- Add xcbc/cmac/ecb support in caam.
- Add AES support for Exynos5433 in s5p.
- Remove sha384/sha512 from artpec7 as hardware cannot do partial
hash"
[ There is a merge of the Freescale SoC tree in order to pull in changes
required by patches to the caam/qi2 driver. ]
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits)
crypto: s5p - add AES support for Exynos5433
dt-bindings: crypto: document Exynos5433 SlimSSS
crypto: crypto4xx - add missing of_node_put after of_device_is_available
crypto: cavium/zip - fix collision with generic cra_driver_name
crypto: af_alg - use struct_size() in sock_kfree_s()
crypto: caam - remove redundant likely/unlikely annotation
crypto: s5p - update iv after AES-CBC op end
crypto: x86/poly1305 - Clear key material from stack in SSE2 variant
crypto: caam - generate hash keys in-place
crypto: caam - fix DMA mapping xcbc key twice
crypto: caam - fix hash context DMA unmap size
hwrng: bcm2835 - fix probe as platform device
crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number
crypto: stm32 - drop pointless static qualifier in stm32_hash_remove()
crypto: chelsio - Fixed Traffic Stall
crypto: marvell - Remove set but not used variable 'ivsize'
crypto: ccp - Update driver messages to remove some confusion
crypto: adiantum - add 1536 and 4096-byte test vectors
crypto: nhpoly1305 - add a test vector with len % 16 != 0
crypto: arm/aes-ce - update IV after partial final CTR block
...
This patch removes an unused label.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f0fcf9ade4 ("crypto: qat - no need to check return...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Conor McLoughlin <conor.mcloughlin@intel.com>
Cc: Waiman Long <longman@redhat.com>
Cc: qat-linux@intel.com
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
Arnd reports that with Kees's latest VLA patches applied, the HMAC
handling in the QAT driver uses a worst case estimate of 160 bytes
for the SHA blocksize, allowing the compiler to determine the size
of the stack frame at compile time and throw a warning:
drivers/crypto/qat/qat_common/qat_algs.c: In function 'qat_alg_do_precomputes':
drivers/crypto/qat/qat_common/qat_algs.c:257:1: error: the frame size
of 1112 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Given that this worst case estimate is only 32 bytes larger than the
actual block size of SHA-512, the use of a VLA here was hiding the
excessive size of the stack frame from the compiler, and so we should
try to move these buffers off the stack.
So move the ipad/opad buffers and the various SHA state descriptors
into the tfm context struct. Since qat_alg_do_precomputes() is only
called in the context of a setkey() operation, this should be safe.
Using SHA512_BLOCK_SIZE for the size of the ipad/opad buffers allows
them to be used by SHA-1/SHA-256 as well.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After bfcb79fca1 ("PCI/ERR: Run error recovery callbacks for all affected
devices"), AER errors are always cleared by the PCI core and drivers don't
need to do it themselves.
Remove calls to pci_cleanup_aer_uncorrect_error_status() from device
driver error recovery functions.
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog, remove PCI core changes, remove unused variables]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
adf_dev_aer_schedule_reset() is never called in atomic context, as it
calls wait_for_completion_timeout().
adf_dev_aer_schedule_reset() calls kzalloc() with GFP_ATOMIC,
which is not necessary.
GFP_ATOMIC can be replaced with GFP_KERNEL.
This is found by a static analysis tool named DCNS written by myself.
I also manually check the kernel code before reporting it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In qat_alg_aead_init_sessions we save pointers to the authenc keys
in a local variable of type struct crypto_authenc_keys and we don't
zeroize it after use. Fix this and don't leak pointers to the
authenc keys.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Functions qat_rsa_set_n, qat_rsa_set_e and qat_rsa_set_n are local to
the source and do not need to be in global scope, so make them static.
Cleans up sparse warnings:
drivers/crypto/qat/qat_common/qat_asym_algs.c:972:5: warning: symbol
'qat_rsa_set_n' was not declared. Should it be static?
drivers/crypto/qat/qat_common/qat_asym_algs.c:1003:5: warning: symbol
'qat_rsa_set_e' was not declared. Should it be static?
drivers/crypto/qat/qat_common/qat_asym_algs.c:1027:5: warning: symbol
'qat_rsa_set_d' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Passing the register value by reference here leads a large amount of stack being
used when CONFIG_KASAN is enabled:
drivers/crypto/qat/qat_common/qat_hal.c: In function 'qat_hal_exec_micro_inst.constprop':
drivers/crypto/qat/qat_common/qat_hal.c:963:1: error: the frame size of 1792 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Changing the register-read function to return the value instead reduces the stack
size to around 800 bytes, most of which is for the 'savuwords' array. The function
now no longer returns an error code, but nothing ever evaluated that anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
Neither 'p' nor 'g' can be NULL, as they were unpacked using
crypto_dh_decode_key(). And it makes no sense for them to be optional.
So remove the NULL checks that were copy-and-pasted into both modules.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the error handling in qat_dh_set_secret() to mirror
dh_set_secret(). The new version is less error-prone because freeing
memory and setting the pointers to NULL is now only done in one place.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pointer vf_info is being assigned but never read, it is redundant
and therefore can be removed.
Cleans up clang warning: Value stored to 'vf_info' is never read
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
trivial fix to spelling mistake in dev_info message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls
to ->mapping_error so that the dma_map_ops instances are
more self contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)
-----BEGIN PGP SIGNATURE-----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=0Fso
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping infrastructure from Christoph Hellwig:
"This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls to
->mapping_error so that the dma_map_ops instances are more self
contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)"
* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
ARM: dma-mapping: Remove traces of NOMMU code
ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
ARM: NOMMU: Introduce dma operations for noMMU
drivers: dma-mapping: allow dma_common_mmap() for NOMMU
drivers: dma-coherent: Introduce default DMA pool
drivers: dma-coherent: Account dma_pfn_offset when used with device tree
dma: Take into account dma_pfn_offset
dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
dma-mapping: remove dmam_free_noncoherent
crypto: qat - avoid an uninitialized variable warning
au1100fb: remove a bogus dma_free_nonconsistent call
MAINTAINERS: add entry for dma mapping helpers
powerpc: merge __dma_set_mask into dma_set_mask
dma-mapping: remove the set_dma_mask method
powerpc/cell: use the dma_supported method for ops switching
powerpc/cell: clean up fixed mapping dma_ops initialization
tile: remove dma_supported and mapping_error methods
xen-swiotlb: remove xen_swiotlb_set_dma_mask
arm: implement ->dma_supported instead of ->set_dma_mask
mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
...
After commit 9e442aa6a753 ("x86: remove DMA_ERROR_CODE"), the inlining
decisions in the qat driver changed slightly, introducing a new false-positive
warning:
drivers/crypto/qat/qat_common/qat_algs.c: In function 'qat_alg_sgl_to_bufl.isra.6':
include/linux/dma-mapping.h:228:2: error: 'sz_out' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/crypto/qat/qat_common/qat_algs.c:676:9: note: 'sz_out' was declared here
The patch that introduced this is correct, so let's just avoid the
warning in this driver by rearranging the unwinding after an error
to make it more obvious to the compiler what is going on.
The problem here is the 'if (unlikely(dma_mapping_error(dev, blp)))'
check, in which the 'unlikely' causes gcc to forget what it knew about
the state of the variables. Cleaning up the dma state in the reverse
order it was created means we can simplify the logic so it doesn't have
to know about that state, and also makes it easier to understand.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Constify the buffer passed to crypto_kpp_set_secret() and
kpp_alg.set_secret, since it is never modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The unsigned long type for init_status and start_status in
service_hndl are not long enough to represent more than 64
acceleration devices. Use an array instead.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove leading zeros in pci function number to be consistent
with output from lspci.
Signed-off-by: Pablo Marcos Oltra <pablo.marcos.oltra@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zero embedded ram in DH85x devices. This is not
needed for newer generations as it is done by HW.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some accelerators of the c62x series have only two bars.
This patch skips BAR0 if the accelerator does not have it.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace BIT(0) macro with proper definition in pf2vf path
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a memory leak in an error path in uc loader.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix incorrect value of ADF_C3XXX_ACCELERATORS_MASK.
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Copy const_tab array into DMA-able memory (accesible by qat hw).
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase value of supported key sizes for qat_aes_xts.
aes-xts keys consists of keys of equal size concatenated.
Fixes: def14bfaf3 ("crypto: qat - add support for ctr(aes) and xts(aes)")
Cc: stable@vger.kernel.org
Reported-by: Wenqian Yu <wenqian.yu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is not need to drop leading zeros from the RSA output
operations results.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DH support under kpp api. Drop struct qat_rsa_request and
introduce a more generic struct qat_asym_request and share it
between RSA and DH requests.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend qat driver to use RSA CRT mode when all CRT related components are
present in the private key. Simplify code in qat_rsa_setkey by adding
qat_rsa_clear_ctx.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Different product families will use FLR or SBR.
Virtual Function devices have no reset method.
Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop all asn1 related code and use the new rsa_helper
functions rsa_parse_[pub|priv]_key for parsing the key
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
alloc_workqueue replaces deprecated create_workqueue().
The workqueue device_reset_wq has workitem &reset_data->reset_work per
adf_reset_dev_data. The workqueue pf2vf_resp_wq is a workqueue for
PF2VF responses has workitem &pf2vf_resp->pf2vf_resp_work per pf2vf_resp.
The workqueue adf_vf_stop_wq is used to call adf_dev_stop()
asynchronously.
Dedicated workqueues have been used in all cases since the workitems
on the workqueues are involved in operation of crypto which can be used in
the IO path which is depended upon during memory reclaim. Hence,
WQ_MEM_RECLAIM has been set to gurantee forward progress under memory
pressure.
Since there are only a fixed number of work items, explicit concurrency
limit is unnecessary.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sizeof(*ctx->dec_cd) and sizeof(*ctx->enc_cd) are equal,
but we should use the correct one for freeing memory anyway.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the adf_ctl_stop_devices to a void function.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The adf_vf_isr.c should only be build if CONFIG_PCI_IOV is enabled
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix undefined reference issue reported by kbuild test robot.
Cc: <stable@vger.kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pf2vf_resp_wq is a global so it has to be created at init
and destroyed at exit, instead of per device.
Cc: <stable@vger.kernel.org>
Tested-by: Suresh Marikkannu <sureshx.marikkannu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix Section mismatch warinig in adf_exit_vf_wq()
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jack Xu