Always set a non-zero "Sw. Id." in the lower nibble of the Function/ASE
and Software Identifier byte in HID++ 2.0 commands.
As per the "Protocol HID++2.0 essential features" section in
https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf
"
Software identifier (4 bits, unsigned)
A number uniquely defining the software that sends a request. The
firmware must copy the software identifier in the response but does
not use it in any other ways.
0 Do not use (allows to distinguish a notification from a response).
"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215699
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Now that all the Logitech Bluetooth devices are probed for HID++
support, remove the handling of those 2 devices without any quirks, as
they're duplicates.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Probe for HID++ support over Bluetooth for all the Logitech Bluetooth
devices. As Logitech doesn't have a list of Bluetooth devices that
support HID++ over Bluetooth, probe every device. The HID++ driver
will fall back to plain HID if the device does not support HID++,
or to a another device-specific driver if it is part of the
unhandled_hidpp_devices array, used in the match function.
Note that this change might cause upower to export 2 batteries for
certain Bluetooth LE devices which export their battery information
through the Bluetooth BATT profile. This particular bug is tracked at:
https://gitlab.freedesktop.org/upower/upower/-/issues/166
Tested with a Logitech Signature M650 mouse, over Bluetooth
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Export hid_match_id() so it can be used in device-specific drivers to
implement their own matching with open-coding a match function.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We can dereference a null pointer trying to queue work to a destroyed
workqueue.
If the device is disconnected, nintendo_hid_remove is called, in which
the rumble_queue is destroyed. Avoid using that queue to defer rumble
work once the controller state is set to JOYCON_CTLR_STATE_REMOVED.
This eliminates the null pointer dereference.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add device ID of Meteor Lake P into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
commit 87562fcd13 ("HID: input: remove the need for HID_QUIRK_INVERT")
made the assumption that it was the only one handling tablets and thus
kept an internal state regarding the tool.
Turns out that the uclogic driver has a timer to release the in range
bit, effectively making hid-input ignoring all in range information
after the very first one.
Fix that by having a more rationale approach which consists in forwarding
every event and let the input stack filter out the duplicates.
Reported-by: Stefan Hansson <newbie13xd@gmail.com>
Fixes: 87562fcd13 ("HID: input: remove the need for HID_QUIRK_INVERT")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The touchbar on Apple T2 Macs has 2 modes, one that shows the function
keys and other that shows the media controls. The user can use the fn
key on his keyboard to switch between the 2 modes.
On Linux, if people were using an external keyboard or mouse, the
touchbar failed to change modes on pressing the fn key with the following
in dmesg :-
[ 10.661445] apple-ib-als 0003:05AC:8262.0001: : USB HID v1.01 Device [Apple Inc. Ambient Light Sensor] on usb-bce-vhci-3/input0
[ 11.830992] apple-ib-touchbar 0003:05AC:8302.0007: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0
[ 12.139407] apple-ib-touchbar 0003:05AC:8102.0008: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0
[ 12.211824] apple-ib-touchbar 0003:05AC:8102.0009: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1
[ 14.219759] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 24.395670] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 34.635791] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 269.579233] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 1 (-110)
Add the USB IDs of the touchbar found in T2 Macs to HID have special
driver list to fix the issue.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Similar to the Surface Go devices, the Elantech touchscreen/digitizer in
the Lenovo Yoga C630 mistakenly reports the battery of the stylus, and
always reports an empty battery.
Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and
prevent the erroneous low battery warnings.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Google Chromebooks use Chrome OS Embedded Controller Sensor Hub instead
of Sensor Hub Fusion and leaves MP2 uninitialized, which disables all
functionalities, even including the registers necessary for feature
detections.
The behavior was observed with Lenovo ThinkPad C13 Yoga.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add device id for the Sparco R383 Mod wheel.
Fix wheel info array length to match actual wheel count present in the array.
Signed-off-by: Michael Hübner <michaelh.95@t-online.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a timing issue captured during ishtp client sending stress tests.
It was observed during stress tests that ISH firmware is getting out of
ordered messages. This is a rare scenario as the current set of ISH client
drivers don't send much data to firmware. But this may not be the case
going forward.
When message size is bigger than IPC MTU, ishtp splits the message into
fragments and uses serialized async method to send message fragments.
The call stack:
ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)->
ishtp_send_msg(with callback)->write_ipc_to_queue->
write_ipc_from_queue->callback->ipc_tx_callback(next fregment)......
When an ipc write complete interrupt is received, driver also calls
write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment.
Through ipc_tx_callback uses spin_lock to protect message splitting, as the
serialized sending method will call back to ipc_tx_callback again, so it doesn't
put sending under spin_lock, it causes driver cannot guarantee all fragments
be sent in order.
Considering this scenario:
ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg
yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue
->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue......
Because ISR has higher exec priority than normal thread, this causes the new
fragment be sent out before previous fragment. This disordered message causes
invalid message to firmware.
The solution is, to send fragments synchronously:
Use ishtp_write_message writing fragments into tx queue directly one by one,
instead of ishtp_send_msg only writing one fragment with completion callback.
As no completion callback be used, so change ipc_tx_callback to ipc_tx_send.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The double `like' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On an Asus G513QY, of the 5 bytes in a 0x5a report, only the first byte
is a meaningful keycode. The other bytes are zeroed out or hold garbage
from the last packet sent to the keyboard.
This patch fixes up the report descriptor for this event so that the
general hid code will only process 1 byte for keycodes, avoiding
spurious key events and unmapped Asus vendor usagepage code warnings.
Signed-off-by: Josh Kilmer <srjek2@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Fixes: c164d6abf3 ("HID: add driver for Valve Steam Controller")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Mv0b
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)
- XP-PEN Deco L support (José Expósito)
- support for Elan eKTH6915 touchscreens (Douglas Anderson)
- other small assorted fixes and device ID additions
* tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
HID: amd_sfh: Handle condition of "no sensors"
HID: amd_sfh: Fix implicit declaration error on i386
HID: apple: Add "GANSS" to the non-Apple list
HID: alps: Declare U1_UNICORN_LEGACY support
HID: wacom: Force pen out of prox if no events have been received in a while
HID: nintendo: Add missing array termination
HID: lg-g15: Fix comment typo
HID: amd_sfh: Implement SFH1.1 functionality
HID: amd_sfh: Move interrupt handling to common interface
HID: amd_sfh: Move amd_sfh_work to common interface
HID: amd_sfh: Move global functions to static
HID: amd_sfh: Add remove operation in amd_mp2_ops
HID: amd_sfh: Add PM operations in amd_mp2_ops
HID: amd_sfh: Add descriptor operations in amd_mp2_ops
HID: amd_sfh: Move request_list variable to client data
HID: amd_sfh: Move request_list struct to header file
HID: amd_sfh: Move common macros and structures
HID: amd_sfh: Add NULL check for hid device
HID: core: remove unneeded assignment in hid_process_report()
ID: intel-ish-hid: hid-client: drop unexpected word "the" in the comments
...
Add a check for num_hid_devices to handle special case the situation
of "no sensors".
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add depended header file to fix error on i386 due to implicit
declaration of function ‘writeq’.
Fixes: 93ce5e0231 ("HID: amd_sfh: Implement SFH1.1 functionality")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
While using the name "SONiX USB DEVICE" for wired mode, my GANSS keyboard
uses "GANSS" for bluetooth mode as well, so adding this to the list.
Signed-off-by: Hilton Chain <hako@ultrarare.space>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
U1_UNICORN_LEGACY id was added to the driver, but was not declared
in the device id table, making it impossible to use.
Fixes: 640e403 ("HID: alps: Add AUI1657 device ID")
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Prox-out events may not be reliably sent by some AES firmware. This can
cause problems for users, particularly due to arbitration logic disabling
touch input while the pen is in prox.
This commit adds a timer which is reset every time a new prox event is
received. When the timer expires we check to see if the pen is still in
prox and force it out if necessary. This is patterend off of the same
solution used by 'hid-letsketch' driver which has a similar problem.
Link: https://github.com/linuxwacom/input-wacom/issues/310
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
joycon_dpad_inputs_jc[] is unterminated. This may result in odd warnings
such as
input: input_set_capability: invalid code 3077588140 for type 1
or in kernel crashes in nintendo_hid_probe(). Terminate the array to fix
the problem.
Fixes: 2af16c1f84 ("HID: nintendo: add nintendo switch controller driver")
Cc: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The double `with' is duplicated in line 769, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Newer AMD SOCs use SFH1.1 memory access with new PCI-id. Hence add new
sfh1_1 sub directory to implement SFH1.1 functionality by defining new
PCI id, interface functions, descriptor functions and handlers which
invokes sfh1.1.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Interrupt handling can be used in multiple files to support all
AMD SOCs. Hence move interrupt handling to common interface.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
amd_sfh_work can be used in multiple files to support all AMD SOCs.
Hence move amd_sfh_work to common interface.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move global functions declared from header files and make them as static
functions wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add remove operation as part of amd_mp2_ops structure to support all
AMD SOCs and use wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add PM operations as part of amd_mp2_ops structure to support all
AMD SOCs and use wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add dynamic descriptor operations as part of amd_mp2_ops structure to
support all AMD SOCs and use wherever applicable.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
request_list variable can be used in multiple files to support all
AMD SOCs. Hence move request_list variable to client data.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
request_list structure can be used in multiple files to support all
AMD SOCs. Hence move request_list structure to header file.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduce common macros and structures to support multiple generations
of AMD SOCs, move them to amd_sfh_common.h.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On removal of hid device during SFH set report may cause NULL pointer
exception. Hence add NULL check for hid device before accessing.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit bebcc522fb ("HID: core: for input reports, process the usages by
priority list") split the iteration into two distinct loops in
hid_process_report().
After this change, the variable field is only used while iterating in the
second loop and the assignment of values to this variable in the first loop
is simply not needed.
Remove the unneeded assignment during retrieval. No functional change and
no change in the resulting object code.
This was discovered as a dead store with clang-analyzer.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/hid/intel-ish-hid/ishtp-hid-client.c
line: 331
* @device: Pointer to the the ishtp client device for which this message
changed to
* @device: Pointer to the ishtp client device for which this message
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Smatch Warning:
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy()
'&mcp->txbuf[5]' too small (59 vs 255)
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf'
too small (34 vs 255)
The 'len' variable can take a value between 0-255 as it can come from
data->block[0] and it is user data. So add an bound check to prevent a
buffer overflow in memcpy().
Fixes: 67a95c2146 ("HID: mcp2221: add usb to i2c-smbus host bridge")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
While the MAC address the uniq identifier is set to (cf. commit
1425247383 ("HID: nintendo: set controller uniq to MAC")) is certainly
unique, the physical location can be more helpful in user interfaces. The
underlying hid_device already provides a suitable value, so we can simply
reuse this here.
Signed-off-by: Thomas Schneider <qsx@chaotikum.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The XP-PEN Deco L (UGEE) needs to be initialized by sending a buffer of
magic data, discovered by sniffing the Windows driver traffic.
In order to differentiate UGEE tablets that need this kind of
initialization from the previous ones, name them v2 internally and
create an entry point for them.
After initialization, the template report descriptors can be discovered
by parsing a string descriptor, similar to the one exposed by HUION v1
devices.
Add all the required elements to support the device.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new template placeholder to allow configuring the number of
buttons in the drawing tablet frame and update the KUnit tests to
cover the new case.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The uclogic_rdesc_template_apply() function is used by the driver to
generate HID descriptors from templates.
In order to avoid regressions in future patches, add KUnit tests to
test the function.
To run the tests:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/hid \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Bastien Nocera