nvme_ctrl_get_by_path() is analogous to blkdev_get_by_path() except it
gets a struct nvme_ctrl from the path to its char dev (/dev/nvme0).
It makes use of filp_open() to open the file and uses the private
data to obtain a pointer to the struct nvme_ctrl. If the fops of the
file do not match, -EINVAL is returned.
The purpose of this function is to support NVMe-OF target passthru
and is exported under the NVME_TARGET_PASSTHRU namespace.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Introduce a new nvme_execute_passthru_rq() helper which calls
nvme_passthru_[start|end]() around blk_execute_rq(). This ensures
all passthru calls (including nvme_submit_io()) will be wrapped
appropriately.
nvme_execute_passthru_rq() will also be useful for the nvmet passthru
code and is exported in the NVME_TARGET_PASSTHRU namespace.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Separate the code to obtain command effects from the code
to start a passthru request and move the nvme_passthru_start() and
nvme_passthru_end() functions up above nvme_submit_user_cmd() in order
that they may be used in a new helper a subsequent patch.
The new helper function will be necessary for nvmet passthru
code to determine if we need to change out of interrupt context
to handle the effects. It is exported in the NVME_TARGET_PASSTHRU
namespace.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The host driver should decide whether to use SGLs or PRPs and they
currently assume the flags are cleared after the call to
nvme_setup_cmd(). However, passed-through commands may erroneously
set these bits; so clear them for all cases.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently the FC transport is set max_hw_sectors based on the lldds
max sgl segment count. However, the block queue max segments is
set based on the controller's max_segments count, which the transport
does not set. As such, the lldd is receiving sgl lists that are
exceeding its max segment count.
Set the controller max segment count and derive max_hw_sectors from
the max segment count.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A deadlock happens in the following scenario with multipath:
1) scan_work(nvme0) detects a new nsid while nvme0
is an optimized path to it, path nvme1 happens to be
inaccessible.
2) Before scan_work is complete nvme0 disconnect is initiated
nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING
3) scan_work(1) attempts to submit IO,
but nvme_path_is_optimized() observes nvme0 is not LIVE.
Since nvme1 is a possible path IO is requeued and scan_work hangs.
--
Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
--
4) Delete also hangs in flush_work(ctrl->scan_work)
from nvme_remove_namespaces().
Similiarly a deadlock with ana_work may happen: if ana_work has started
and calls nvme_mpath_set_live and device_add_disk, it will
trigger I/O. When we trigger disconnect I/O will block because
our accessible (optimized) path is disconnecting, but the alternate
path is inaccessible, so I/O blocks. Then disconnect tries to flush
the ana_work and hangs.
[ 605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core]
[ 605.552087] Call Trace:
[ 605.552683] __schedule+0x2b9/0x6c0
[ 605.553507] schedule+0x42/0xb0
[ 605.554201] io_schedule+0x16/0x40
[ 605.555012] do_read_cache_page+0x438/0x830
[ 605.556925] read_cache_page+0x12/0x20
[ 605.557757] read_dev_sector+0x27/0xc0
[ 605.558587] amiga_partition+0x4d/0x4c5
[ 605.561278] check_partition+0x154/0x244
[ 605.562138] rescan_partitions+0xae/0x280
[ 605.563076] __blkdev_get+0x40f/0x560
[ 605.563830] blkdev_get+0x3d/0x140
[ 605.564500] __device_add_disk+0x388/0x480
[ 605.565316] device_add_disk+0x13/0x20
[ 605.566070] nvme_mpath_set_live+0x5e/0x130 [nvme_core]
[ 605.567114] nvme_update_ns_ana_state+0x2c/0x30 [nvme_core]
[ 605.568197] nvme_update_ana_state+0xca/0xe0 [nvme_core]
[ 605.569360] nvme_parse_ana_log+0xa1/0x180 [nvme_core]
[ 605.571385] nvme_read_ana_log+0x76/0x100 [nvme_core]
[ 605.572376] nvme_ana_work+0x15/0x20 [nvme_core]
[ 605.573330] process_one_work+0x1db/0x380
[ 605.574144] worker_thread+0x4d/0x400
[ 605.574896] kthread+0x104/0x140
[ 605.577205] ret_from_fork+0x35/0x40
[ 605.577955] INFO: task nvme:14044 blocked for more than 120 seconds.
[ 605.579239] Tainted: G OE 5.3.5-050305-generic #201910071830
[ 605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 605.582320] nvme D 0 14044 14043 0x00000000
[ 605.583424] Call Trace:
[ 605.583935] __schedule+0x2b9/0x6c0
[ 605.584625] schedule+0x42/0xb0
[ 605.585290] schedule_timeout+0x203/0x2f0
[ 605.588493] wait_for_completion+0xb1/0x120
[ 605.590066] __flush_work+0x123/0x1d0
[ 605.591758] __cancel_work_timer+0x10e/0x190
[ 605.593542] cancel_work_sync+0x10/0x20
[ 605.594347] nvme_mpath_stop+0x2f/0x40 [nvme_core]
[ 605.595328] nvme_stop_ctrl+0x12/0x50 [nvme_core]
[ 605.596262] nvme_do_delete_ctrl+0x3f/0x90 [nvme_core]
[ 605.597333] nvme_sysfs_delete+0x5c/0x70 [nvme_core]
[ 605.598320] dev_attr_store+0x17/0x30
Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will
indicate the phase of controller deletion where I/O cannot be allowed
to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to
be issued to the bottom device, and only after we flush the ana_work
and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces)
we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work
from re-firing by aborting early if we are not LIVE, so we should be safe
here.
In addition, change the transport drivers to follow the updated state
machine.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We are starting to see some non-trivial states
so lets start documenting them.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Has the driver use shared CQs providing ~10%-20% improvement as seen in
the patch introducing shared CQs. Instead of opening a CQ for each QP
per controller connected, a CQ for each QP will be provided by the RDMA
core driver that will be shared between the QPs on that core reducing
interrupt overhead.
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch implements a solution for a BIOS hack used on some currently
shipping Intel systems to change driver power management policy for PCIe
NVMe drives. Some newer Intel platforms, like some Comet Lake systems,
require that PCIe devices use D3 when doing suspend-to-idle in order to
allow the platform to realize maximum power savings. This is particularly
needed to support ATX power supply shutdown on desktop systems. In order to
ensure this happens for root ports with storage devices, Microsoft
apparently created this ACPI _DSD property as a way to influence their
driver policy. To my knowledge this property has not been discussed with
the NVME specification body.
Though the solution is not ideal, it addresses a problem that also affects
Linux since the NVMe driver's default policy of using NVMe APST during
suspend-to-idle prevents the PCI root port from going to D3 and leads to
higher power consumption for these platforms. The power consumption
difference may be negligible on laptop systems, but many watts on desktop
systems when the ATX power supply is blocked from powering down.
The patch creates a new nvme_acpi_storage_d3 function to check for the
StorageD3Enable property during probe and enables D3 as a quirk if set. It
also provides a 'noacpi' module parameter to allow skipping the quirk if
needed.
Tested with:
- PM961 NVMe SED Samsung 512GB
- INTEL SSDPEKKF512G8
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
>From the initial implementation of NVMe SGL kernel support
commit a7a7cbe353 ("nvme-pci: add SGL support") with addition of the
commit 943e942e62 ("nvme-pci: limit max IO size and segments to avoid
high order allocations") now there is only caller left for
nvme_pci_iod_alloc_size() which statically passes true for last
parameter that calculates allocation size based on SGL since we need
size of biggest command supported for mempool allocation.
This patch modifies the helper functions nvme_pci_iod_alloc_size() such
that it is now uses maximum of PRP and SGL size for iod allocation size
calculation.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Saving the nvme controller's page size was from a time when the driver
tried to use different sized pages, but this value is always set to
a constant, and has been this way for some time. Remove the 'page_size'
field and replace its usage with the constant value.
This also lets the compiler make some micro-optimizations in the io
path, and that's always a good thing.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We've already validated the 'kato' in nvme_start_keep_alive(), thus no
need to validate it again in nvme_start_ctrl(). Remove it.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
"v" is an unsigned int so it can't be more than UINT_MAX. Removing this
check makes it easier to preserve the error code as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a new max_active zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.
Export max_active_zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.
Add the new max_active_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.
For SCSI devices, even though max active zones is not part of the ZBC/ZAC
spec, export max_active_zones as 0, signifying "no limit".
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new max_open_zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.
Export max open zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.
Add the new max_open_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By the time a namespace is added to ctrl->namespaces list and thus
can be looked up ns->disk has been assigned, and it it never cleared.
Remove all the checks for ns->disk being NULL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
The nvme_pci_iod_alloc_size() should return 'size_t' type to be
consistent with the sizeof return value.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a blank line after declarations to make code more readable.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We've validated the segment counts before calling nvme_map_data(),
so there is no need to validate again in nvme_pci_use_sgls(, which is
only called from nvme_map_data().
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Documented model names of Intel SSDs requiring quirks.
Signed-off-by: David Fugate <david.fugate@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is useful information, and moreover its it's useful to
be able to alter these parameters per controller after it
has been established.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined
in NVM Express TP4053. Zoned namespaces are discovered based on their
Command Set Identifier reported in the namespaces Namespace
Identification Descriptor list. A successfully discovered Zoned
Namespace will be registered with the block layer as a host managed
zoned block device with Zone Append command support. A namespace that
does not support append is not supported by the driver.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <keith.busch@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The Commands Supported and Effects log page was extended with a CSI
field that enables the host to query the log page for each command set
supported. Retrieve this log page for each command set that an attached
namespace supports, and save a pointer to that log in the namespace head.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <keith.busch@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Implements support for multiple I/O Command Sets. NVMe TP 4056
introduces a method to enumerate multiple command sets per namespace. If
the command set is exposed, this method for enumeration will be used
instead of the traditional method that uses the CC.CSS register command
set register for command set identification.
For namespaces where the Command Set Identifier is not supported or
recognized, the specific namespace will not be created.
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use USEC_PER_SEC instead of magic numbers to make code more readable.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we have a long list of request to send, signal the network stack
that more is coming (MSG_MORE). If we have nothing else, signal MSG_EOR.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
blk-mq request plugging can improve the execution of our pipeline.
When we queue a request we actually trigger our I/O worker thread
yielding a context switch by definition. However if we know that
there are more requests in the pipe that are coming, we are better
off not trigger our I/O worker and only do that for the last request
in the batch (bd->last). By having it, we improve efficiency by
amortizing context switches over a batch of requests.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The queue processing will splice to a queue local list, this should
alleviate some contention on the send_list lock, but also prepares
us to the next patch where we look on these lists for network stack
flag optimization.
Remove queue lock as its not used anymore.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
[hch: simplified a loop]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just cleanup by removing the empty line.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Although use of for loop is preferred it is not a common practice to
have 80 char long for loop initialization and comparison section.
Use temp variables for calculating values and replace them in the
for loop with size of all variables to set to u64 since preferred
variable is declared as u64.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The NVMe PCIe declares module parameter io_queue_depth as int. Change
this to u16 as queue depth can never be negative. Now to reflect this
update module parameter getter function from param_get_int() ->
param_get_uint() and respective setter function with type of n changed
from int to u16 with param_set_int() to param_set_ushort(). Finally
update struct nvme_dev q_depth member to u16 and use u16 in min_t()
when calculating dev->q_depth in the nvme_pci_enable() (since q_depth is
now u16) and use unsigned int instead of int when calculating
dev->tagset.queue_depth as target variable tagset->queue_depth is of type
unsigned int in nvme_dev_add().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_init_identify() when calculating submission queue size use u16
instead of int type in the min_t() since target variable ctrl->sqsize is
of type u16.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_configure_directives() when calculating number of streams use
u16 instead of unsigned type in the min_t() since target variable
ctrl->nr_streams is of type u16.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8CYDYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcQkH/2vOsPf79yWtsc7x
hd2LpCPfrm7T1xlQcYcXbEbyRI8sqPmguixO8pRI1ePl2lBZ7KurfyeYgYZNGpFU
t74Ph6A6dSWoCgO68Genm/SQuK8ic6o9n1Vr8tDsGDp5KlHWNaweq4JwHrsPmO1T
cI0PR/ClAhLG8cQZ4x988Es5HTNGY17XK27e+M/zKYxSMGY2NRdJBGQIq964i5Q8
2d9G0rtVCaVDzgjrLwaFm6RBu21Il7HV6KsBsacyTFiL1ywx2vnUHzeZQyvuJSOQ
4YpLo9v4tBP10WHC50LRStZyO0qRwPVd/Yl7fL4R/CKsJT9H4uiwasVoEBVSL/k6
CUn3JL0=
=P/Vx
-----END PGP SIGNATURE-----
Merge tag 'v5.8-rc4' into for-5.9/drivers
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide
a clean base and making the life for the NVMe changes easier.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v5.8-rc4': (732 commits)
Linux 5.8-rc4
x86/ldt: use "pr_info_once()" instead of open-coding it badly
MIPS: Do not use smp_processor_id() in preemptible code
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
.gitignore: Do not track `defconfig` from `make savedefconfig`
io_uring: fix regression with always ignoring signals in io_cqring_wait()
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
i2c: mlxcpld: check correct size of maximum RECV_LEN packet
i2c: add Kconfig help text for slave mode
i2c: slave-eeprom: update documentation
i2c: eg20t: Load module automatically if ID matches
i2c: designware: platdrv: Set class based on DMI
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
mm/page_alloc: fix documentation error
vmalloc: fix the owner argument for the new __vmalloc_node_range callers
mm/cma.c: use exact_nid true to fix possible per-numa cma leak
...
For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.
Fixes: b2ce4d9069 ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N <Avinash.M.N@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Commit 59c7c3caaa intended to only silently ignore non retry-able
errors (DNR bit set) such that we can still identify misbehaving
controllers, and in the other hand propagate retry-able errors (DNR bit
cleared) so we don't wrongly abandon a namespace just because it happens
to be temporarily inaccessible.
The goal remains the same as the original commit where this was
introduced but unfortunately had the logic backwards.
Fixes: 59c7c3caaa ("nvme: fix possible hang when ns scanning fails during error recovery")
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mpath disk node takes a reference on the request mpath
request queue when adding live path to the mpath gendisk.
However if we connected to an inaccessible path device_add_disk
is not called, so if we disconnect and remove the mpath gendisk
we endup putting an reference on the request queue that was
never taken [1].
Fix that to check if we ever added a live path (using
NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue
reference.
[1]:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xa6/0xf0
RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007
RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980
RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0
FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
disk_release+0xa2/0xc0
device_release+0x28/0x80
kobject_put+0xa5/0x1b0
nvme_put_ns_head+0x26/0x70 [nvme_core]
nvme_put_ns+0x30/0x60 [nvme_core]
nvme_remove_namespaces+0x9b/0xe0 [nvme_core]
nvme_do_delete_ctrl+0x43/0x5c [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write+0xc1/0x1a0
vfs_write+0xb6/0x1a0
ksys_write+0x5f/0xe0
do_syscall_64+0x52/0x1a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In the following scenario scan_work and ana_work will deadlock:
When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.
While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.
Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on
ANY ctrl will not be able to complete nvme_mpath_set_live()
on the same ns->head, which is required in order to update
the new accessible path and remove NVME_NS_ANA_PENDING..
Therefore IO never completes: deadlock [1].
Fix:
Move device_add_disk out of the head->lock and protect it with an
atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit.
[1]:
kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:2 D 0 160 2 0x80004000
kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: nvme_update_ns_ana_state+0x22/0x60 [nvme_core]
kernel: nvme_update_ana_state+0xca/0xe0 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_read_ana_log+0x76/0x100 [nvme_core]
kernel: nvme_ana_work+0x15/0x20 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ret_from_fork+0x35/0x40
kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:4 D 0 439 2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_mpath_add_disk+0xbe/0x100 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x256/0x390 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ret_from_fork+0x35/0x40
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Right now ns->head->lock is protecting namespace mutation
which is wrong and unneeded. Move it to only protect
against head mutations. While we're at it, remove unnecessary
ns->head reference as we already have head pointer.
The problem with this is that the head->lock spans
mpath disk node I/O that may block under some conditions (if
for example the controller is disconnecting or the path
became inaccessible), The locking scheme does not allow any
other path to enable itself, preventing blocked I/O to complete
and forward-progress from there.
This is a preparation patch for the fix in a subsequent patch
where the disk I/O will also be done outside the head->lock.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.
While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.
In order to recover and complete the IO ana_work on the same ctrl
should be able to update the path state and remove NVME_NS_ANA_PENDING.
The deadlock occurs because scan_work keeps holding ana_lock,
so ana_work hangs [1].
Fix:
Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy
of the ANA group desc, and then calls nvme_update_ns_ana_state() without
holding ana_lock.
[1]:
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: ? __switch_to_asm+0x34/0x70
kernel: ? select_task_rq_fair+0x1aa/0x5c0
kernel: ? kvm_sched_clock_read+0x11/0x20
kernel: ? sched_clock+0x9/0x10
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: nvme_read_ana_log+0x3a/0x100 [nvme_core]
kernel: nvme_ana_work+0x15/0x20 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ? process_one_work+0x380/0x380
kernel: ? kthread_park+0x80/0x80
kernel: ret_from_fork+0x35/0x40
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Revert fab7772bfb ("nvme-multipath: revalidate nvme_ns_head gendisk
in nvme_validate_ns")
When adding a new namespace to the head disk (via nvme_mpath_set_live)
we will see partition scan which triggers I/O on the mpath device node.
This process will usually be triggered from the scan_work which holds
the scan_lock. If I/O blocks (if we got ana change currently have only
available paths but none are accessible) this can deadlock on the head
disk bd_mutex as both partition scan I/O takes it, and head disk revalidation
takes it to check for resize (also triggered from scan_work on a different
path). See trace [1].
The mpath disk revalidation was originally added to detect online disk
size change, but this is no longer needed since commit cb224c3af4
("nvme: Convert to use set_capacity_revalidate_and_notify") which already
updates resize info without unnecessarily revalidating the disk (the
mpath disk doesn't even implement .revalidate_disk fop).
[1]:
--
kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:9 D 0 494 2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: revalidate_disk+0x63/0xa0
kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core]
kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core]
kernel: ? evict+0x14c/0x1b0
kernel: revalidate_disk+0x2b/0xa0
kernel: nvme_validate_ns+0x49/0x940 [nvme_core]
kernel: ? blk_mq_free_request+0xd2/0x100
kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
kernel: ? process_one_work+0x380/0x380
kernel: ? kthread_park+0x80/0x80
kernel: ret_from_fork+0x1f/0x40
...
kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:1 D 0 2630 2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: ? __switch_to_asm+0x34/0x70
kernel: ? file_fdatawait_range+0x30/0x30
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: ? kmem_cache_alloc_trace+0x19c/0x230
kernel: efi_partition+0x1e6/0x708
kernel: ? vsnprintf+0x39e/0x4e0
kernel: ? snprintf+0x49/0x60
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: ? blk_mq_free_request+0xd2/0x100
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
kernel: ? process_one_work+0x380/0x380
kernel: ? kthread_park+0x80/0x80
kernel: ret_from_fork+0x1f/0x40
--
Fixes: fab7772bfb ("nvme-multipath: revalidate nvme_ns_head gendisk
in nvme_validate_ns")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The completion vector index that is given during CQ creation can't
exceed the number of support vectors by the underlying RDMA device. This
violation currently can accure, for example, in case one will try to
connect with N regular read/write queues and M poll queues and the sum
of N + M > num_supported_vectors. This will lead to failure in establish
a connection to remote target. Instead, in that case, share a completion
vector between queues.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Both admin's and drive's tagsets should be set according the numa
node of the controller.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Logan Gunthorpe