When there is an error in init_bus() then we need to call release_bus()
before we return.
Fixes: c5c77ba18e ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case *mode* happens to be different than WILC_AP_MODE and
WILC_STATION_MODE, gtk_key is not released, hence leanding
to a memory leak. So, in this case it is safer to release
gtk_key just before returning to callers.
Addresses-Coverity-ID: 1476020 ("Resource leak")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the cmd.read_write setting is not initialized so it contains
garbage from the stack. Fix this by setting it to 0 to indicate a
read is required.
Detected by CoverityScan, CID#1357925 ("Uninitialized scalar variable")
Fixes: c5c77ba18e ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct inconsistent indenting reported by smatch.
Instead of simply remove indentation, refactor the
loop to also improve readabilitiy.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor code to handle scan operation callback from cfg80211 context.
No need to maintain 'scan_attr' struct as the wid command is directly
sent to firmware from cfg80211 context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code to avoid the use of an extra buffer to store the
connection related parameter. No need to call cfg80211_disconnected in
case of failure to send the wid command to firmware, an error status is
directly returned in cfg80211 connect callback.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the connect related cfg callback to be called from cfg80211
context. No need to post connect command internally in case scan is in
progress instead simply return the error status in connect ops callback.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor disconnect operation callback to handle from the cfg80211
context. The reason code is not required to pass as parameter to the
function, so remove it.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor code to handle the get_station() callback from cfg80211
context. Provided different API's to fetch the station statistics
information in sync or async call. From cfg80211 get_station() ops
callback calls the sync version of API.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the correct reference to remain_ch variable in scan complete.
Passing 'msg->body.remain_on_ch' to handle_remain_on_chan is not
correct. So used the correct reference used to store roc related
information during the scan.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid handling of WID_MAC_ADDR wid command in deferred approach. Instead
of posting the wid to workqueue now handle directly from the caller
context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After code refactor some of the macro and variables are not required any
more, so deleted the unused code.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor add/delete key operation to handle directly from cfg80211
context. Also, avoid an extra copy of the information in hif layer and
directly fill the buffer in firmware format.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid handling of inactive time related wid command in deferred manner.
Instead of posting the wid to workqueue now handle directly from the
caller context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid handling of WID_SET_DRV_HANDLER wid command in deferred approach.
Instead of posting the wid to work queue now handle directly from the
caller context. Remove 'is_sync' parameter from the API as it's not
required anymore.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid handling of WID_CURRENT_CHANNEL wid command in deferred approach.
Instead of posting the wid to work queue now handle directly from the
caller context. Use structure to fill in the firmware specific format.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor code to handle dump_station() callback from cfg80211 context.
Instead of deferring issue of wid command now send it directly from cfg
context. Also making use of wilc_get_rssi() error status in case there
is a failure to post the wid command to the firmware.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid handling configuration params wid command in deferred approach.
Instead of posting to workqueue now handle directly from the caller
context. Reduce the size of wid array from 32 to 4 as maximum only 4 wid
used at a time.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid handling of WID_CURRENT_CHANNEL wid command in deferred approach.
Instead of posting the wid to workqueue now handle directly from the
caller context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid handling of mgmt_frame_register operation callback in a deferred
manner. Now set the wid command to firmware directly from caller
context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor add/change beacon cfg80211 operation callback to handle from
cfg context. Also avoided extra copy of information by packing directly
in firmware expected format.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_zero_ether_addr() API to check if mac address value is zero.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code to handle delete/delete_all station operation callback
from cfg80211 context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the return type from u32 to void for wilc_hif_pack_sta_param() as
its value is not used. Also remove the use of extra pointer as it's not
required now.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code to avoid handling of add/edit stations using work
queue and now set the wid value from caller context.
Avoid making an extra copy of buffer and directly copy the data in
firmware expected format.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code to handle the power management cfg operation from the
caller context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid the use of internal work queue to defer the handling of tx power
related cfg operations callback. Now issuing the wid command to firmware
directly from the caller context.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use mutex lock to protect the issuing of wid cmd to the firmware.
Currently the wid commands are synchronized by use of hif_workqueue work
queue.
Now, these changes are required to synchronize the access to wid
command, so the commands can be issued directly from cfg80211 context
and 'WILC_wq' thread.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor code to avoid the use of static variables to configure the
'wiphy' structure. Now move static variables as part of 'priv' data so
it helped to maintain this information per interface.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of put_unaligned_le32() function to pack the wid command buffer
for firmware.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary 'if' check in wilc_mac_close() as those conditions
will not happen.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename 'tsf_hi' element in network_info struct as it's not used to store
only the higher 32-bit value but the complete 64-bit tsf value.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of 'ENOBUFS' instead of WILC_TX_ERR_NO_BUF macro. The value of
WILC_TX_ERR_NO_BUF is -2, which is confusing with ENOENT error code.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the firmware related macro by prefix with 'WILC_FW_' prefix for
a better namespace. Also, move them to wilc_wlan_if.h file along with other
FW related macros.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move 'current_tx_rate' enum to wilc_wlan_if.h, to have it along with the
other FW related to constants. Also added prefix to have a better
namespace.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the macros defined in wilc_wlan_if.h header to have clear
namespace. As convention used 'WILC_FW_' prefix for constants defined for
firmware and 'WILC_' prefix for driver constants.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Restructure the code to have a proper namespace for macro defined to
handle the security types. Move them as part of wilc_wlan_if.h header as
along with other macro defined for firmware.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clubbed mac status constants inside the enum constant and also added
'WILC_' prefix to have better namespace.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved sdio_cmd52 & sdio_cmd53 struct from wilc_wlan_if.h, as its used in
wilc_sdio.cfile.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to remove the unused macros and struct members in
host_interface.h header file.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of WLAN_PMKID_LEN macro provided by ieee80211.h header instead
of PMKID_LEN.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of ieee80211.h provided macros and removed the extra macro
defined for the same purpose.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After removing cfg_values member, cfg_values_lock that was used to protect
it can also be removed.
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
host_if_drv.cfg_values is a write only member, and can be removed
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validate cfg parameters after being called by cfg80211 in set_wiphy_params
before scheduling the work executed in handle_cfg_param
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter