Commit 3c4d755915 ("tls: kernel TLS support") declared but never implemented
these functions.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting dev->priv_flags & IFF_SEE_ALL_HWTSTAMP_REQUESTS is only legal
for drivers which were converted to ndo_hwtstamp_get() and
ndo_hwtstamp_set(), and it is only there that we call ndo_hwtstamp_set()
for a request that otherwise goes to phylib (for stuff like packet traps,
which need to be undone if phylib failed, hence the old_cfg logic).
The problem is that we end up calling ndo_hwtstamp_get() when we don't
need to (even if the SIOCSHWTSTAMP wasn't intended for phylib, or if it
was, but the driver didn't set IFF_SEE_ALL_HWTSTAMP_REQUESTS). For those
unnecessary conditions, we share a code path with virtual drivers (vlan,
macvlan, bonding) where ndo_hwtstamp_get() is implemented as
generic_hwtstamp_get_lower(), and may be resolved through
generic_hwtstamp_ioctl_lower() if the lower device is unconverted.
I.e. this situation:
$ ip link add link eno0 name eno0.100 type vlan id 100
$ hwstamp_ctl -i eno0.100 -t 1
We are unprepared to deal with this, because if ndo_hwtstamp_get() is
resolved through a legacy ndo_eth_ioctl(SIOCGHWTSTAMP) lower_dev
implementation, that needs a non-NULL old_cfg.ifr pointer, and we don't
have it.
But we don't even need to deal with it either. In the general case,
drivers may not even implement SIOCGHWTSTAMP handling, only SIOCSHWTSTAMP,
so it makes sense to completely avoid a SIOCGHWTSTAMP call if we can.
The solution is to split the single "if" condition into 3 smaller ones,
thus separating the decision to call ndo_hwtstamp_get() from the
decision to call ndo_hwtstamp_set(). The third "if" condition is
identical to the first one, and both are subsets of the second one.
Thus, the "cfg" argument of kernel_hwtstamp_config_changed() is always
valid.
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iLOspJsvjPj+y8jikg7erXDomWe8sqHMdfL_2LQSFrPAg@mail.gmail.com/
Fixes: fd770e856e ("net: remove phy_has_hwtstamp() -> phy_mii_ioctl() decision from converted drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use eth_broadcast_addr() to assign broadcast address instead
of memset().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc with W=1 reports
drivers/net/ethernet/ibm/ibmvnic.c:194:13: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
^
This variable is not used so remove it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308040609.zQsSXWXI-lkp@intel.com/
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add page pool for RX buffers for faster buffer cycle and reduce CPU
usage.
The standard page pool API is used.
With iperf and 128 threads test, this patch improved the throughput
by 12-15%, and decreased the IRQ associated CPU's usage from 99-100% to
10-50%.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rushil Gupta says:
====================
gve: Add QPL mode for DQO descriptor format
GVE supports QPL ("queue-page-list") mode where
all data is communicated through a set of pre-registered
pages. Adding this mode to DQO.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a note about QPL and RDA mode
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RX path allocates the QPL page pool at queue creation, and
tries to reuse these pages through page recycling. This patch
ensures that on refill no non-QPL pages are posted to the device.
When the driver is running low on free buffers, an ondemand
allocation step kicks in that allocates a non-qpl page for
SKB business to free up the QPL page in use.
gve_try_recycle_buf was moved to gve_rx_append_frags so that driver does
not attempt to mark buffer as used if a non-qpl page was allocated
ondemand.
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each QPL page is divided into GVE_TX_BUFS_PER_PAGE_DQO buffers.
When a packet needs to be transmitted, we break the packet into max
GVE_TX_BUF_SIZE_DQO sized chunks and transmit each chunk using a TX
descriptor.
We allocate the TX buffers from the free list in dqo_tx.
We store these TX buffer indices in an array in the pending_packet
structure.
The TX buffers are returned to the free list in dqo_compl after
receiving packet completion or when removing packets from miss
completions list.
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GVE supports QPL ("queue-page-list") mode where
all data is communicated through a set of pre-registered
pages. Adding this mode to DQO descriptor format.
Add checks, abi-changes and device options to support
QPL mode for DQO in addition to GQI. Also, use
pages-per-qpl supplied by device-option to control the
size of the "queue-page-list".
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: set few options locklessly
This series is avoiding the socket lock for six TCP options.
They are not heavily used, but this exercise can give
ideas for other parts of TCP/IP stack :)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rskq_defer_accept field can be read/written without
the need of holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->linger2 can be set locklessly as long as readers
use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->keepalive_probes can be set locklessly, readers
are already taking care of this field being potentially
set by other threads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->keepalive_intvl can be set locklessly, readers
are already taking care of this field being potentially
set by other threads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
icsk->icsk_user_timeout can be set locklessly,
if all read sides use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
icsk->icsk_syn_retries can safely be set without locking the socket.
We have to add READ_ONCE() annotations in tcp_fastopen_synack_timer()
and tcp_write_timeout().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first pull request for v6.6 and only driver patches this time.
Nothing special really standing out, it has been quiet most likely due
to vacations.
Major changes:
rtl8xxxu
* enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU
mwifiex
* allow moving to a different namespace
mt76
* preparation for mt7925 support
* mt7981 support
ath12k
* Extremely High Throughput (EHT) PHY support for Wi-Fi 7
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmTM6gkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuuAggAjRQi7Vjsfr+GlZ+g/y/vf+ircw8YjKgy
wJqnQ0fnJ4rpyxqVFjMr+ocuOrdBufTSs/W4fqOBbbg9oimsgg+vxIQA8GmQIUVQ
ZQVWQHVqPLQ6NVp/YZJnt9seeCewGHW6UZxG9k0MqR1RJn+KinmSjWKRo1D56niL
rJQAK0FWrVqkj5nt9lKRJLMGxX0k/ftrdZgHanUOVCNYi9Ukx0jXSbqSMftTk7xz
r3jtuY5zAV+2GXoMIbW4ogBks4Yx06XzVycByzj+dYt5E3VBdDFX+mXlsw9vnjbv
whVzsuMnYBu6CCFlKDPdGsmrzZA0GrLCRZE9uw7yhwZZ+qKkQZ8kNw==
=5r3T
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The first pull request for v6.6 and only driver patches this time.
Nothing special really standing out, it has been quiet most likely due
to vacations.
Major changes:
rtl8xxxu
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
mwifiex
- allow moving to a different namespace
mt76
- preparation for mt7925 support
- mt7981 support
ath12k
- Extremely High Throughput (EHT) PHY support for Wi-Fi 7
* tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (172 commits)
wifi: rtw89: return failure if needed firmware elements are not recognized
wifi: rtw89: add to parse firmware elements of BB and RF tables
wifi: rtw89: introduce infrastructure of firmware elements
wifi: rtw89: add firmware suit for BB MCU 0/1
wifi: rtw89: add firmware parser for v1 format
wifi: rtw89: introduce v1 format of firmware header
wifi: rtw89: support firmware log with formatted text
wifi: rtw89: recognize log format from firmware file
wifi: ath12k: avoid deadlock by change ieee80211_queue_work for regd_update_work
wifi: ath12k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED
wifi: ath12k: relax list iteration in ath12k_mac_vif_unref()
wifi: ath12k: configure puncturing bitmap
wifi: ath12k: parse WMI service ready ext2 event
wifi: ath12k: add MLO header in peer association
wifi: ath12k: peer assoc for 320 MHz
wifi: ath12k: add WMI support for EHT peer
wifi: ath12k: prepare EHT peer assoc parameters
wifi: ath12k: add EHT PHY modes
wifi: ath12k: propagate EHT capabilities to userspace
wifi: ath12k: WMI support to process EHT capabilities
...
====================
Link: https://lore.kernel.org/r/87msz7j942.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
tcp: Disable header prediction for MD5.
The 1st patch disable header prediction for MD5 flow and the 2nd
patch updates the stale comment in tcp_parse_options().
====================
Link: https://lore.kernel.org/r/20230803224552.69398-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 9ea88a1530 ("tcp: md5: check md5 signature without socket
lock"), the MD5 option is checked in tcp_v[46]_rcv().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP socket saves the minimum required header length in tcp_header_len
of struct tcp_sock, and later the value is used in __tcp_fast_path_on()
to generate a part of TCP header in tcp_sock(sk)->pred_flags.
In tcp_rcv_established(), if the incoming packet has the same pattern
with pred_flags, we enter the fast path and skip full option parsing.
The MD5 option is parsed in tcp_v[46]_rcv(), so we need not parse it
again later in tcp_rcv_established() unless other options exist. We
add TCPOLEN_MD5SIG_ALIGNED to tcp_header_len in two paths to avoid the
slow path.
For passive open connections with MD5, we add TCPOLEN_MD5SIG_ALIGNED
to tcp_header_len in tcp_create_openreq_child() after 3WHS.
On the other hand, we do it in tcp_connect_init() for active open
connections. However, the value is overwritten while processing
SYN+ACK or crossed SYN in tcp_rcv_synsent_state_process().
These two cases will have the wrong value in pred_flags and never go
into the fast path.
We could update tcp_header_len in tcp_rcv_synsent_state_process(), but
a test with slightly modified netperf which uses MD5 for each flow shows
that the slow path is actually a bit faster than the fast path.
On c5.4xlarge EC2 instance (16 vCPU, 32 GiB mem)
$ for i in {1..10}; do
./super_netperf $(nproc) -H localhost -l 10 -- -m 256 -M 256;
done
Avg of 10
* 36e68eadd3 : 10.376 Gbps
* all fast path : 10.374 Gbps (patch v2, See Link)
* all slow path : 10.394 Gbps
The header prediction is not worth adding complexity for MD5, so let's
disable it for MD5.
Link: https://lore.kernel.org/netdev/20230803042214.38309-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move marking the PHY as being on a SFP module into the SFP code between
getting the PHY device (and thus initialising the phy_device structure)
and registering the discovered device.
This means that PHY drivers can use phy_on_sfp() in their match and
get_features methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qRaga-001vKt-8X@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit c3d2ed93b1 ("mlxsw: Remove old parsing depth infrastructure")
left behind mlxsw_sp_nve_inc_parsing_depth_get()/mlxsw_sp_nve_inc_parsing_depth_put().
And commit 532b49e41e ("mlxsw: spectrum_span: Derive SBIB from maximum port speed & MTU")
remove mlxsw_sp_span_port_mtu_update()/mlxsw_sp_span_speed_update_work() but leave the
declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230803142047.42660-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe_napi_add_all()/ixgbe_napi_del_all() are declared but never implemented in
commit 92915f7120 ("ixgbevf: Driver main and ethool interface module and main header")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803141904.15316-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d021c34405 ("VSOCK: Introduce VM Sockets") declared but never implemented
vsock_release_pending(). Also vsock_init_tap() never implemented since introduction
in commit 531b374834 ("VSOCK: Add vsockmon tap functions").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230803134507.22660-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d8d9ba8dc9 ("net: 802: remove dead leftover after ipx driver removal")
remove these implementations but leave the declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803135424.41664-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 098a697b49 ("tcp_metrics: Use a single hash table
for all network namespaces.") we can avoid calling tcp_net_metrics_init()
for each new netns.
Instead, rename tcp_net_metrics_init() to tcp_metrics_hash_alloc(),
and move it to __init section.
Also move tcpmhash_entries to __initdata section.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230803135417.2716879-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
llc_conn_ac_send_i_rsp_as_ack() and llc_conn_ev_sendack_tmr_exp()
are never implemented since beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230803134747.41512-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko says:
====================
devlink: use spec to generate split ops
This is an outcome of the discussion in the following thread:
https://lore.kernel.org/netdev/20230720121829.566974-1-jiri@resnulli.us/
It serves as a dependency on the linked selector patchset.
There is an existing spec for devlink used for userspace part
generation. There are two commands supported there.
This patchset extends the spec so kernel split ops code could
be generated from it.
====================
Link: https://lore.kernel.org/r/20230803111340.1074067-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do the switch and use generated split ops for get and info_get commands.
Remove those from small ops array.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-13-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Put the newly added generated header to the include list. Remove the
duplicated temporary function prototypes.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the existing devlink spec in order to serve as a source for
generation of valid devlink split ops for the existing commands.
Add the generated sources.
Node that the policies are narrowed down only to the attributes that
are actually parsed. The dont-validate-strict parsing policy makes sure
that other possibly passed garbage attributes from userspace are
ignored during validation.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing dump op for info-get command and re-generate related
devlink-user.[ch] code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To be prepared for the follow-up generated split ops addition,
make the functions devlink_nl_pre_doit() and devlink_nl_post_doit()
usable outside of netlink.c. Introduce temporary prototypes which are
going to be removed once the generated header will be included.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce couple of dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The generated names of the doit netlink callback are missing "cmd" in
their names. Change names to be ready to switch to generated split ops
header.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to avoid name collision with the generated split ops array
which is going to be introduced as a follow-up patch, rename
the existing ops array to devlink_nl_small_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When policies are rendered for split ops, they are consumed in the same
file. No need to expose them for user outside, make them static.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Directional model limitation is only applicable for uapi mode.
For kernel mode, the code is generated correctly using right cmd values
for do/dump requests. Lift the limitation.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For split ops, do and dump has different meaningful values in
validate field.
Fix the rendering to allow the values per op type as follows:
do: strict
dump: dump, strict-dump
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow user to specify GENL_DONT_VALIDATE_DUMP_STRICT flag for validation
and add this flag to netlink spec schema.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230803111340.1074067-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since platform_get_irq_byname() never returned zero, so it need not to
check whether it returned zero, it returned -EINVAL or -ENXIO when
failed, so we replace the return error code with the result it returned.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vlan_insert_tag() and friends do not allocate a new skb.
However they might allocate a new skb->head.
Update their comments to better describe their behavior.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have seen tcp_hashinfo starting at a non optimal location,
forcing input handlers to pull two cache lines instead of one,
and sharing a cache line that was dirtied more than necessary:
ffffffff83680600 b tcp_orphan_timer
ffffffff83680628 b tcp_orphan_cache
ffffffff8368062c b tcp_enable_tx_delay.__tcp_tx_delay_enabled
ffffffff83680630 B tcp_hashinfo
ffffffff83680680 b tcp_cong_list_lock
After this patch, ehash, ehash_locks, ehash_mask and ehash_locks_mask
are located in a read-only cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At present hwc timeout value is a fixed value. This patch sets the hwc
timeout from the hardware. It now uses a new hardware capability
GDMA_DRV_CAP_FLAG_1_HWC_TIMEOUT_RECONFIG to query and set the value
in hwc_timeout.
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a warning reported by coccinelle:
./drivers/net/ethernet/microchip/vcap/vcap_api.c:2399:9-16: WARNING:
ERR_CAST can be used with ri
Use ERR_CAST instead of ERR_PTR + PTR_ERR to simplify the
conversion process.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmTLXpwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6NM8B/9M3zYbi7CedTzT4TW1i0PNjx5qBL7/
o7YJg/pVbGSpX8sRFOlJB9K4JTH1GI+ziZ/+KIv5fJlyBMfArqNG64NyC3i5SL3R
rPpLE3/w6OHk5fZuPYfOsdzf7KOsSnyqr2D2aFDKImrsNaqHIQWdNUBJcAuBG/Hm
cfmbEOKsYq47eSDkE63aUzb1Ta2wf6lQN2+wVr1jRQIiO3/UEjJyu3mveujYbEVK
JNOsMBuzx5Kz2bwul7ygKCRdULxT7LoopBg0jJksFY6DjEurG35r4FhOakacW0Jj
yk+0qHiKdAFGGY2+AlYHt1Hh0eFzsUXBwhMvlZ/aVKXb1uZAZw1iQ/00
=aQuE
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.6-20230803' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-08-03
This is a pull request of 9 patches for net-next/master.
The 1st patch is by Ruan Jinjie, targets the flexcan driver, and
cleans up the error handling of platform_get_irq() in the
flexcan_probe() function.
Markus Schneider-Pargmann contributes 6 patches for the tcan4x5x M_CAN
driver, consisting of some cleanups, and adding support for the
tcan4552/4553 chips.
Another patch by Ruan Jinjie, that cleans up the error path of
platform_get_irq() in the c_can_plat_probe() function of the C_CAN
platform driver.
The last patch is by Frank Jungclaus and adds support for the
CAN-USB/3 and CAN FD to the ESD USB CAN driver.
================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5aa83a4c0a (" [PATCH] remove two obsolete net drivers") remove fmv18x_probe().
And commmit 01f4685797 ("eth: amd: remove NI6510 support (ni65)") leave ni65_probe().
Commit a10079c662 ("staging: remove hp100 driver") remove hp100 driver and hp100_probe()
declaration is not used anymore.
sonic_probe() and iph5526_probe() are never implemented since the beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230802130716.37308-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yue Haibing