rdma_for_each_block() makes assumptions about how the SGL is constructed
that don't work if the block size is below the page size used to to build
the SGL.
The rules for umem SGL construction require that the SG's all be PAGE_SIZE
aligned and we don't encode the actual byte offset of the VA range inside
the SGL using offset and length. So rdma_for_each_block() has no idea
where the actual starting/ending point is to compute the first/last block
boundary if the starting address should be within a SGL.
Fixing the SGL construction turns out to be really hard, and will be the
subject of other patches. For now block smaller pages.
Fixes: 4a35339958 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/2-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is possible for a single SGL to span an aligned boundary, eg if the SGL
is
61440 -> 90112
Then the length is 28672, which currently limits the block size to
32k. With a 32k page size the two covering blocks will be:
32768->65536 and 65536->98304
However, the correct answer is a 128K block size which will span the whole
28672 bytes in a single block.
Instead of limiting based on length figure out which high IOVA bits don't
change between the start and end addresses. That is the highest useful
page size.
Fixes: 4a35339958 ("RDMA/umem: Add API to find best driver supported page size in an MR")
Link: https://lore.kernel.org/r/1-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change counters to return failure like any other verbs destroy, however
this flow shouldn't return error at all.
Link: https://lore.kernel.org/r/20200907120921.476363-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other verbs objects, CQ shouldn't fail during destroy, but
mlx5_ib didn't follow this contract with mixed IB verbs objects with
DEVX. Such mix causes to the situation where FW and kernel are fully
interdependent on the reference counting of each side.
Kernel verbs and drivers that don't have DEVX flows shouldn't fail.
Fixes: e39afe3d6d ("RDMA: Convert CQ allocations to be under core responsibility")
Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ib_alloc_cq*() and ib_free_cq*() are solely kernel verbs to manage CQs
and doesn't need extra indirection just to call same functions with
constant parameter NULL as udata.
Link: https://lore.kernel.org/r/20200907120921.476363-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In similar way to other IB objects, restore the ability to return error on
SRQ destroy. Strictly speaking, this change is not necessary, and provided
here to ensure a symmetrical interface like other destroy functions.
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Like any other IB verbs objects, AH are refcounted by ib_core. The release
of those objects are controlled by ib_core with promise that AH destroy
can't fail.
Being SW object for now, this change makes dealloc_ah() to behave like any
other destroy IB flows.
Fixes: d345691471 ("RDMA: Handle AH allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IB verbs objects are counted by the kernel and ib_core ensures that
deallocate PD will success so it will be called once all other objects
that depends on PD will be released. This is achieved by managing various
reference counters on such objects.
The mlx5 driver didn't follow this standard flow when allowed DEVX objects
that are not managed by ib_core to be interleaved with the ones under
ib_core responsibility.
In such interleaved scenarios deallocate command can fail and ib_core will
leave uobject in internal DB and attempt to clean it later to free
resources anyway.
This change partially restores returned value from dealloc_pd() for all
drivers, but keeping in mind that non-DEVX devices and kernel verbs paths
shouldn't fail.
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently it triggers a WARN_ON and then goes ahead and destroys the
uobject anyhow, leaking any driver memory.
The only place that leaks driver memory should be during FD close() in
uverbs_destroy_ufile_hw().
Drivers are only allowed to fail destroy uobjects if they guarantee
destroy will eventually succeed. uverbs_destroy_ufile_hw() provides the
loop to give the driver that chance.
Link: https://lore.kernel.org/r/20200902081708.746631-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In ucma_process_join(), if the call to xa_alloc() fails, the function will
return without freeing mc. Fix this by jumping to the correct line.
In the process I renamed the jump labels to something more memorable for
extra clarity.
Link: https://lore.kernel.org/r/20200902162454.332828-1-alex.dewar90@gmail.com
Addresses-Coverity-ID: 1496814 ("Resource leak")
Fixes: 95fe51096b ("RDMA/ucma: Remove mc_list and rely on xarray")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the returned speed from __ethtool_get_link_ksettings() is
SPEED_UNKNOWN this will lead to reporting a wrong speed and width for
providers that uses ib_get_eth_speed(), fix that by defaulting the
netdev_speed to SPEED_1000 in case the returned value from
__ethtool_get_link_ksettings() is SPEED_UNKNOWN.
Fixes: d41861942f ("IB/core: Add generic function to extract IB speed from netdev")
Link: https://lore.kernel.org/r/20200902124304.170912-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It's not safe to access the next CQ in list_for_each_entry() after
invoking ib_free_cq(), because the CQ has already been freed in current
iteration. It should be replaced by list_for_each_entry_safe().
Fixes: c7ff819aef ("RDMA/core: Introduce shared CQ pool API")
Link: https://lore.kernel.org/r/1598963935-32335-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc3' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Drivers that fail destroy can cause uverbs to leak uobjects. Drivers are
required to always eventually destroy their ubojects, so trigger a WARN_ON
to detect this driver bug.
Link: https://lore.kernel.org/r/0-v1-b1e0ed400ba9+f7-warn_destroy_ufile_hw_jgg@nvidia.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use cancel_work_sync() to ensure that the wq is not running and simply
assign NULL to ctx->cm_id to indicate if the work ran or not. Delete the
close_wq since flush_workqueue() is no longer needed.
Link: https://lore.kernel.org/r/20200818120526.702120-15-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a new connection is established the RDMA CM creates a new cm_id and
passes it through to the event handler. However inside the UCMA the new ID
is not assigned a ucma_context until the user retrieves the event from a
syscall.
This creates a weird edge condition where a cm_id's context can continue
to point at the listening_id that created it, and a number of additional
edge conditions on event list clean up related to destroying half created
IDs.
There is also a race condition in ucma_get_events() where the
cm_id->context is being assigned without holding the handler_mutex.
Simplify all of this by creating the ucma_context inside the event handler
itself and eliminating the edge case of a half created cm_id. All cm_id's
can be uniformly destroyed via __destroy_id() or via the close_work.
Link: https://lore.kernel.org/r/20200818120526.702120-14-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the backlog is now an atomic the file->mut is now only protecting
the event_list and ctx_list. Narrow its scope to make it clear
Link: https://lore.kernel.org/r/20200818120526.702120-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All entry points to the rdma_cm from a ULP must be single threaded,
even this error unwinds. Add the missing locking.
Fixes: 7c11910783 ("RDMA/ucma: Put a lock around every call to the rdma_cm layer")
Link: https://lore.kernel.org/r/20200818120526.702120-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This value is locked under the file->mut, ensure it is held whenever
touching it.
The case in ucma_migrate_id() is a race, while in ucma_free_uctx() it is
already not possible for the write side to run, the movement is just for
clarity.
Fixes: 88314e4dda ("RDMA/cma: add support for rdma_migrate_id()")
Link: https://lore.kernel.org/r/20200818120526.702120-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ctx->file is changed under the file->mut lock by ucma_migrate_id(), which
is impossible to lock correctly. Instead change ctx->file under the
handler_lock and ctx_table lock and revise all places touching ctx->file
to use this locking when reading ctx->file.
Link: https://lore.kernel.org/r/20200818120526.702120-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only reader of destroying is inside a handler under the handler_mutex,
so directly use the handler_mutex when setting it instead of the larger
file->mut.
As the refcount could be zero here, and the cm_id already freed, and
additional refcount grab around the locking is required to touch the
cm_id.
Link: https://lore.kernel.org/r/20200818120526.702120-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In almost all cases rdma_accept() is called under the handler_mutex by
ULPs from their handler callbacks. The one exception was ucma which did
not get the handler_mutex.
To improve the understand-ability of the locking scheme obtain the mutex
for ucma as well.
This improves how ucma works by allowing it to directly use handler_mutex
for some of its internal locking against the handler callbacks intead of
the global file->mut lock.
There does not seem to be a serious bug here, other than a DISCONNECT event
can be delivered concurrently with accept succeeding.
Link: https://lore.kernel.org/r/20200818120526.702120-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is not really necessary to keep a linked list of mcs associated with
each context when we can just scan the xarray to find the right things.
The removes another overloading of file->mut by relying on the xarray
locking for mc instead.
Link: https://lore.kernel.org/r/20200818120526.702120-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The store to ctx->cm_id was based on the idea that _ucma_find_context()
would not return the ctx until it was fully setup.
Without locking this doesn't work properly.
Split things so that the xarray is allocated with NULL to reserve the ID
and once everything is final set the cm_id and store.
Along the way this shows that the error unwind in ucma_get_event() if a
new ctx is created is wrong, fix it up.
Link: https://lore.kernel.org/r/20200818120526.702120-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ucma_close() is open coding the tail end of ucma_destroy_id(), consolidate
this duplicated code into a function.
Link: https://lore.kernel.org/r/20200818120526.702120-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
During the file_operations release function it is already not possible
that write() can be running concurrently, remove the extra locking
around the ctx_list.
Link: https://lore.kernel.org/r/20200818120526.702120-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Both ucma_destroy_id() and ucma_close_id() (triggered from an event via a
wq) can drive the refcount to zero. ucma_get_ctx() was wrongly assuming
that the refcount can only go to zero from ucma_destroy_id() which also
removes it from the xarray.
Use refcount_inc_not_zero() instead.
Link: https://lore.kernel.org/r/20200818120526.702120-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the interest of converging on a common instrumentation infrastructure,
modernize the pr_debug() call sites added by commit 119bf81793 ("IB/cm:
Add debug prints to ib_cm"). The new tracepoints appear in a new "ib_cma"
subsystem.
The conversion is somewhat mechanical. Someone more familiar with the
semantics of the recorded information might suggest additional data
capture.
Some benefits include:
- Tracepoints enable "always on" reporting of these errors
- The error records are structured and compact
- Tracepoints provide hooks for eBPF scripts
Sample output:
nfsd-1954 [003] 62.017901: icm_dreq_skipped: local_id=1998890974 remote_id=1129750393 state=DREQ_RCVD lap_state=LAP_UNINIT
Link: https://lore.kernel.org/r/159767239665.2968.10613294222688696646.stgit@klimt.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "domain" argument is constant and modern device (mlx5) doesn't support
anything except IB_FLOW_DOMAIN_USER, so delete this extra parameter and
simplify code.
Link: https://lore.kernel.org/r/20200730081235.1581127-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more. Remove that parameter in the whole gup
stack.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Smaller set of RDMA updates. A smaller number of 'big topics' with the
majority of changes being driver updates.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob for
device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it off.
Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of a
device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed
-----BEGIN PGP SIGNATURE-----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=0z2L
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
Mapping as little as 64GB can take more than 10 seconds, triggering issues
on kernels with CONFIG_PREEMPT_NONE=y.
ib_umem_get() already splits the work in 2MB units on x86_64, adding a
cond_resched() in the long-lasting loop is enough to solve the issue.
Note that sg_alloc_table() can still use more than 100 ms, which is also
problematic. This might be addressed later in ib_umem_add_sg_table(),
adding new blocks in sgl on demand.
Link: https://lore.kernel.org/r/20200730015755.1827498-1-edumazet@google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The memory allocated for the DIM wasn't freed in in error unwind path, fix
it by calling to rdma_dim_destroy().
Fixes: da6629793a ("RDMA/core: Provide RDMA DIM support for ULPs")
Link: https://lore.kernel.org/r/20200730082719.1582397-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com <mailto:maxg@mellanox.com>>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW destroy operation should be last operation after all possible CQ users
completed their work, so move DIM work cancellation before such destroy
call.
Fixes: da6629793a ("RDMA/core: Provide RDMA DIM support for ULPs")
Link: https://lore.kernel.org/r/20200730082719.1582397-3-leon@kernel.org
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When dumping QPs bound to a counter, raw QPs should be allowed to dump
without the CAP_NET_RAW privilege. This is consistent with what "rdma res
show qp" does.
Fixes: c4ffee7c9b ("RDMA/netlink: Implement counter dumpit calback")
Link: https://lore.kernel.org/r/20200727095828.496195-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a rdma_cm_id needs to be destroyed after a handler callback fails,
part of the destruction pattern is open coded into each call site.
Unfortunately the blind assignment to state discards important information
needed to do cma_cancel_operation(). This results in active operations
being left running after rdma_destroy_id() completes, and the
use-after-free bugs from KASAN.
Consolidate this entire pattern into destroy_id_handler_unlock() and
manage the locking correctly. The state should be set to
RDMA_CM_DESTROYING under the handler_lock to atomically ensure no futher
handlers are called.
Link: https://lore.kernel.org/r/20200723070707.1771101-5-leon@kernel.org
Reported-by: syzbot+08092148130652a6faae@syzkaller.appspotmail.com
Reported-by: syzbot+a929647172775e335941@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The REQ flows are concerned that once the handler is called on the new
cm_id the ULP can choose to trigger a rdma_destroy_id() concurrently at
any time.
However, this is not true, while the ULP can call rdma_destroy_id(), it
immediately blocks on the handler_mutex which prevents anything harmful
from running concurrently.
Remove the confusing extra locking and refcounts and make the
handler_mutex protecting state during destroy more clear.
Link: https://lore.kernel.org/r/20200723070707.1771101-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Whenever an event is delivered to the handler it should be done under the
handler_mutex and upon any non-zero return from the handler it should
trigger destruction of the cm_id.
cma_process_remove() skips some steps here, it is not necessarily wrong
since the state change should prevent any races, but it is confusing and
unnecessary.
Follow the standard pattern here, with the slight twist that the
transition to RDMA_CM_DEVICE_REMOVAL includes a cma_cancel_operation().
Link: https://lore.kernel.org/r/20200723070707.1771101-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
cma_process_remove() triggers an unconditional rdma_destroy_id() for
internal_id's and skips the event deliver and transition through
RDMA_CM_DEVICE_REMOVAL.
This is confusing and unnecessary. internal_id always has
cma_listen_handler() as the handler, have it catch the
RDMA_CM_DEVICE_REMOVAL event and directly consume it and signal removal.
This way the FSM sequence never skips the DEVICE_REMOVAL case and the
logic in this hard to test area is simplified.
Link: https://lore.kernel.org/r/20200723070707.1771101-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The error codes in _ib_modify_qp() are supposed to be negative errno.
Fixes: 7a5c938b9e ("IB/core: Check for rdma_protocol_ib only after validating port_num")
Link: https://lore.kernel.org/r/1595645787-20375-1-git-send-email-liheng40@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These are missing throughout ucma, it harmlessly copies garbage from
userspace, but in this new code which uses min to compute the copy length
it can result in uninitialized stack memory. Check for minimum length at
the very start.
BUG: KMSAN: uninit-value in ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091
CPU: 0 PID: 8457 Comm: syz-executor069 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1df/0x240 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091
ucma_write+0x5c5/0x630 drivers/infiniband/core/ucma.c:1764
do_loop_readv_writev fs/read_write.c:737 [inline]
do_iter_write+0x710/0xdc0 fs/read_write.c:1020
vfs_writev fs/read_write.c:1091 [inline]
do_writev+0x42d/0x8f0 fs/read_write.c:1134
__do_sys_writev fs/read_write.c:1207 [inline]
__se_sys_writev+0x9b/0xb0 fs/read_write.c:1204
__x64_sys_writev+0x4a/0x70 fs/read_write.c:1204
do_syscall_64+0xb0/0x150 arch/x86/entry/common.c:386
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 34e2ab57a9 ("RDMA/ucma: Extend ucma_connect to receive ECE parameters")
Fixes: 0cb15372a6 ("RDMA/cma: Connect ECE to rdma_accept")
Link: https://lore.kernel.org/r/0-v1-d5b86dab17dc+28c25-ucma_syz_min_jgg@nvidia.com
Reported-by: syzbot+086ab5ca9eafd2379aa6@syzkaller.appspotmail.com
Reported-by: syzbot+7446526858b83c8828b2@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix reported by kbuild warning.
drivers/infiniband/core/uverbs_cmd.c:1897:47: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
BUILD_BUG_ON(IB_USER_LAST_QP_ATTR_MASK == (1 << 31));
^
Link: https://lore.kernel.org/r/20200720175627.1273096-3-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The kbuild reported the following warning, so clean whole uverbs_cmd.c
file.
drivers/infiniband/core/uverbs_cmd.c:1066:6: warning: Variable 'ret' is reassigned a value before the old one has been used. [redundantAssignment]
ret = uverbs_request(attrs, &cmd, sizeof(cmd));
^
drivers/infiniband/core/uverbs_cmd.c:1064:0: note: Variable 'ret' is reassigned a value before the old one has been used.
int ret = -EINVAL;
^
Link: https://lore.kernel.org/r/20200720175627.1273096-2-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The automatic object lifetime model allows us to change the write()
interface to have the same logic as the ioctl() path. Update the
create/alloc functions to be in the following format, so the code flow
will be the same:
* Allocate objects
* Initialize them
* Call to the drivers, this is last step that is allowed to fail
* Finalize object
* Return response and allow to core code to handle abort/commit
respectively.
Link: https://lore.kernel.org/r/20200719052223.75245-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Create the same logic flow for the write() interface as we have for the
ioctl() path by making sure that the object is committed or aborted
automatically after HW object creation.
Link: https://lore.kernel.org/r/20200719052223.75245-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The query_pkey() isn't mandatory for the iwarp providers, so remove this
requirement from the RDMA core.
Link: https://lore.kernel.org/r/20200714183414.61069-4-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocate the pkey cache only if the pkey_tbl_len is set by the provider,
also add checks to avoid accessing the pkey cache when it not initialized.
Link: https://lore.kernel.org/r/20200714183414.61069-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
In manual mode allow bind user QPs with different pids to same counter,
since this is allowed in auto mode.
Bind kernel QPs and user QPs to the same counter are not allowed.
Fixes: 1bd8e0a9d0 ("RDMA/counter: Allow manual mode configuration support")
Link: https://lore.kernel.org/r/20200702082933.424537-4-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In auto mode only bind user QPs to a dynamic counter, since this feature
is mainly used for system statistic and diagnostic purpose, while there's
no need to counter kernel QPs so far.
Fixes: 99fa331dc8 ("RDMA/counter: Add "auto" configuration mode support")
Link: https://lore.kernel.org/r/20200702082933.424537-3-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With the "PID" category QPs have same PID will be bound to same counter;
If this category is not set then QPs have different PIDs will be bound
to same counter.
This is implemented for 2 reasons:
1. The counter is a limited resource, while there may be dozens of
applications, each of which creates several types of QPs, which means
it may doesn't have enough counter.
2. The system administrator needs all QPs created by all applications
with same type bound to one counter.
The counter name and PID is only make sense when "PID" category are
configured.
This category can also be used in combine with others, e.g. QP type.
Link: https://lore.kernel.org/r/20200702082933.424537-2-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update the code to allocate and free ib_xrcd structure in the
ib_core instead of inside drivers.
Link: https://lore.kernel.org/r/20200630101855.368895-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose UAPI to query MR, this will let user space application that
didn't allocate the MR but has access to by owning the matching command
FD to retrieve its information.
Link: https://lore.kernel.org/r/20200630093916.332097-8-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the query ucontext functionality by returning the original
ucontext data as part of an extra mlx5 attribute that holds the driver
UAPI response.
Link: https://lore.kernel.org/r/20200630093916.332097-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expose UAPI to query ucontext, this will let user space application that
didn't allocate the ucontext but has access to by owning the matching
command FD to retrieve the ucontext information.
Link: https://lore.kernel.org/r/20200630093916.332097-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set IOVA on IB MR in uverbs layer to let all drivers have it, this
includes both reg/rereg MR flows.
As part of this change cleaned-up this setting from the drivers that
already did it by themselves in their user flows.
Fixes: e6f0330106 ("mlx4_ib: set user mr attributes in struct ib_mr")
Link: https://lore.kernel.org/r/20200630093916.332097-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Enable CQ ioctl commands by default, this functionality is fully mature
to be used over ioctl, no reason to maintain any more the EXP KCONFIG
entry to enable it.
Link: https://lore.kernel.org/r/20200630093916.332097-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace the mutex with read write semaphore and use xarray instead of
linked list for XRC target QPs. This will give faster XRC target
lookup. In addition, when QP is closed, don't insert it back to the xarray
if the destroy command failed.
Link: https://lore.kernel.org/r/20200706122716.647338-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_alloc_xrcd() already does the required initialization, so move the
uverbs to call it and save code duplication, while cleaning the function
argument lists of that function.
Link: https://lore.kernel.org/r/20200706122716.647338-3-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocating an MR flow can only be initiated by kernel users, and not from
userspace so a udata parameter is redundant.
Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allocating an MR flow can only be initiated by kernel users, and not from
userspace. As a result, the udata parameter is always being passed as
NULL. Rename ib_alloc_mr_user function to ib_alloc_mr and remove the udata
parameter.
Link: https://lore.kernel.org/r/20200706120343.10816-3-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The common kernel pattern is to check for error, not success. Flip the if
statement accordingly and keep the main flow unindented.
Link: https://lore.kernel.org/r/20200706120343.10816-2-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is a race condition where ib_nl_make_request() inserts the request
data into the linked list but the timer in ib_nl_request_timeout() can see
it and destroy it before ib_nl_send_msg() is done touching it. This could
happen, for instance, if there is a long delay allocating memory during
nlmsg_new()
This causes a use-after-free in the send_mad() thread:
[<ffffffffa02f43cb>] ? ib_pack+0x17b/0x240 [ib_core]
[ <ffffffffa032aef1>] ib_sa_path_rec_get+0x181/0x200 [ib_sa]
[<ffffffffa0379db0>] rdma_resolve_route+0x3c0/0x8d0 [rdma_cm]
[<ffffffffa0374450>] ? cma_bind_port+0xa0/0xa0 [rdma_cm]
[<ffffffffa040f850>] ? rds_rdma_cm_event_handler_cmn+0x850/0x850 [rds_rdma]
[<ffffffffa040f22c>] rds_rdma_cm_event_handler_cmn+0x22c/0x850 [rds_rdma]
[<ffffffffa040f860>] rds_rdma_cm_event_handler+0x10/0x20 [rds_rdma]
[<ffffffffa037778e>] addr_handler+0x9e/0x140 [rdma_cm]
[<ffffffffa026cdb4>] process_req+0x134/0x190 [ib_addr]
[<ffffffff810a02f9>] process_one_work+0x169/0x4a0
[<ffffffff810a0b2b>] worker_thread+0x5b/0x560
[<ffffffff810a0ad0>] ? flush_delayed_work+0x50/0x50
[<ffffffff810a68fb>] kthread+0xcb/0xf0
[<ffffffff816ec49a>] ? __schedule+0x24a/0x810
[<ffffffff816ec49a>] ? __schedule+0x24a/0x810
[<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180
[<ffffffff816f25a7>] ret_from_fork+0x47/0x90
[<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180
The ownership rule is once the request is on the list, ownership transfers
to the list and the local thread can't touch it any more, just like for
the normal MAD case in send_mad().
Thus, instead of adding before send and then trying to delete after on
errors, move the entire thing under the spinlock so that the send and
update of the lists are atomic to the conurrent threads. Lightly reoganize
things so spinlock safe memory allocations are done in the final NL send
path and the rest of the setup work is done before and outside the lock.
Fixes: 3ebd2fd0d0 ("IB/sa: Put netlink request into the request list before sending")
Link: https://lore.kernel.org/r/1592964789-14533-1-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_unregister_device_queued() can only be used by drivers using the new
dealloc_device callback flow, and it has a safety WARN_ON to ensure
drivers are using it properly.
However, if unregister and register are raced there is a special
destruction path that maintains the uniform error handling semantic of
'caller does ib_dealloc_device() on failure'. This requires disabling the
dealloc_device callback which triggers the WARN_ON.
Instead of using NULL to disable the callback use a special function
pointer so the WARN_ON does not trigger.
Fixes: d0899892ed ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com
Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RWQ table is used for RSS uverbs and not in used for the kernel
consumers, delete ib_create_rwq_ind_table() routine that is not
called at all.
Link: https://lore.kernel.org/r/20200624105422.1452290-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cancel_delayed_work can be called under lock since it doesn't sleep.
This makes the RMPP_STATE_CANCELING state not needed anymore, remove it.
Link: https://lore.kernel.org/r/20200621104738.54850-5-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The refcount API provides better safety than atomics API. Therefore,
change atomic functions to refcount functions.
Link: https://lore.kernel.org/r/20200621104738.54850-4-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace calls of atomic_dec() to mad_agent_priv->refcount with calls to
deref_mad_agent() in order to issue complete. Most likely the refcount is
> 1 at these points, but it is difficult to prove. Performance is not
important on these paths, so be obviously correct.
Link: https://lore.kernel.org/r/20200621104738.54850-3-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Maor Gottlieb says:
====================
The following series adds support to get the RDMA resource data in RAW
format. The main motivation for doing this is to enable vendors to return
the entire QP/CQ/MR data without a need from the vendor to set each
field separately.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies
* branch 'raw_dumps':
RDMA/mlx5: Add support to get MR resource in RAW format
RDMA/mlx5: Add support to get CQ resource in RAW format
RDMA/mlx5: Add support to get QP resource in RAW format
RDMA: Add support to dump resource tracker in RAW format
RDMA: Add dedicated CM_ID resource tracker function
RDMA: Add dedicated QP resource tracker function
RDMA: Add a dedicated CQ resource tracker function
RDMA: Add dedicated MR resource tracker function
RDMA/core: Don't call fill_res_entry for PD
net/mlx5: Add support in query QP, CQ and MKEY segments
net/mlx5: Export resource dump interface
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get resource dump in raw format. It enable drivers to
return the entire device specific QP/CQ/MR context without a need from the
driver to set each field separately.
The raw query returns only the device specific data, general data is still
returned by using the existing queries.
Example:
$ rdma res show mr dev mlx5_1 mrn 2 -r -j
[{"ifindex":7,"ifname":"mlx5_1",
"data":[0,4,255,254,0,0,0,0,0,0,0,0,16,28,0,216,...]}]
Link: https://lore.kernel.org/r/20200623113043.1228482-9-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a cm id,
add a dedicated callback function. In addition remove fill_res_entry which
is not used anymore.
Link: https://lore.kernel.org/r/20200623113043.1228482-8-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a QP, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-7-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a CQ, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-6-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a MR, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
None of the drivers implement it, remove it.
Link: https://lore.kernel.org/r/20200623113043.1228482-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, when RMPP MADs are processed while the MAD agent is destroyed,
it could result in use after free of rmpp_recv, as decribed below:
cpu-0 cpu-1
----- -----
ib_mad_recv_done()
ib_mad_complete_recv()
ib_process_rmpp_recv_wc()
unregister_mad_agent()
ib_cancel_rmpp_recvs()
cancel_delayed_work()
process_rmpp_data()
start_rmpp()
queue_delayed_work(rmpp_recv->cleanup_work)
destroy_rmpp_recv()
free_rmpp_recv()
cleanup_work()[1]
spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free
[1] cleanup_work() == recv_cleanup_handler
Fix it by waiting for the MAD agent reference count becoming zero before
calling to ib_cancel_rmpp_recvs().
Fixes: 9a41e38a46 ("IB/mad: Use IDR for agent IDs")
Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Query a dynamically-allocated counter before release it, to update it's
hwcounters and log all of them into history data. Otherwise all values of
these hwcounters will be lost.
Fixes: f34a55e497 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read")
Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Silence documentation build warnings by correcting kernel-doc comments.
./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'uobject' not described in 'ib_create_srq_user'
./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'udata' not described in 'ib_create_srq_user'
./drivers/infiniband/core/umem_odp.c:161: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_alloc_child'
./drivers/infiniband/core/umem_odp.c:225: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_get'
./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'ah_attr' description in 'rvt_create_ah'
./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'create_flags' description in 'rvt_create_ah'
./drivers/infiniband/ulp/iser/iscsi_iser.h:363: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc'
./drivers/infiniband/ulp/iser/iscsi_iser.h:377: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd0' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd1' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd2' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd3' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd4' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd0' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd1' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd2' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd3' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:342: warning: Function parameter or member 'reserved' not described in 'opa_veswport_summary_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd0' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd1' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd2' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd3' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd4' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd5' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd6' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd7' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd8' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd9' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:460: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:485: warning: Function parameter or member 'reserved' not described in 'opa_vnic_notice_attr'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:500: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad_trap'
Link: https://lore.kernel.org/r/5373936.DvuYhMxLoT@laptop.coltonlewis.name
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If ib_dma_mapping_error() returns non-zero value,
ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM
without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv
in this case.
Fixes: 2c34e68f42 ("IB/mad: Check and handle potential DMA mapping errors")
Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com
Signed-off-by: Fan Guo <guofan5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix the following sparse error by adding annotation to
cm_queue_work_unlock() that it releases cm_id_priv->lock lock.
drivers/infiniband/core/cm.c:936:24: warning: context imbalance in
'cm_queue_work_unlock' - unexpected unlock
Fixes: e83f195aa4 ("RDMA/cm: Pull duplicated code into cm_queue_work_unlock()")
Link: https://lore.kernel.org/r/20200611130045.1994026-1-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A few large, long discussed works this time. The RNBD block driver has
been posted for nearly two years now, and the removal of FMR has been a
recurring discussion theme for a long time. The usual smattering of
features and bug fixes.
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and a
mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block RDMA
device specific to ionos's cloud environment. It brings strong multipath
and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs and
drivers. FRWR should be preferred for at least a decade now.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl7X/IwACgkQOG33FX4g
mxp2uw/+MI2S/aXqEBvZfTT8yrkAwqYezS0VeTDnwH/T6UlTMDhHVN/2Ji3tbbX3
FEKT1i2mnAL5RqUAL1lr9g4sG/bVozrpN46Ws5Lu9dTbIPLKTNPWDuLFQDUShKY7
OyMI/bRx6anGnsOy20iiBqnrQbrrZj5TECgnmrkAl62QFdcl7aBWe/yYjy4CT11N
ub+aBXBREN1F1pc0HIjd2tI+8gnZc+mNm1LVVDRH9Capun/pI26qDNh7e6QwGyIo
n8ItraC8znLwv/nsUoTE7/JRcsTEe6vJI26PQmczZfNJs/4O65G7fZg0eSBseZYi
qKf7Uwtb3qW0R7jRUMEgFY4DKXVAA0G2ph40HXBuzOSsqlT6HqYMO2wgG8pJkrTc
qAjoSJGzfAHIsjxzxKI8wKuufCddjCm30VWWU7EKeriI6h1J0uPVqKkQMfYBTkik
696eZSBycAVgwayOng3XaehiTxOL7qGMTjUpDjUR6UscbiPG919vP+QsbIUuBXdb
YoddBQJdyGJiaCXv32ciJjo9bjPRRi/bII7Q5qzCNI2mi4ZVbudF4ffzyQvdHtNJ
nGnpRXoPi7kMvUrKTMPWkFjj0R5/UsPszsA51zbxPydfgBe0Dlc2PrrIG8dlzYAp
wbV0Lec+iJucKlt7EZtrjz1xOiOOaQt/5/cW1bWqL+wk2t6gAuY=
=9zTe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
If the cm_id state is IB_CM_REP_SENT when cm_destroy_id() is called, it
calls cm_send_rej_locked().
In cm_send_rej_locked(), it calls cm_enter_timewait() and the state is
changed to IB_CM_TIMEWAIT.
Now back to cm_destroy_id(), it breaks from the switch statement, and the
next call is WARN_ON(cm_id->state != IB_CM_IDLE).
This triggers a spurious warning. Instead, the code should goto retest
after returning from cm_send_rej_locked() to move the state to IDLE.
Fixes: 67b3c8dcea ("RDMA/cm: Make sure the cm_id is in the IB_CM_IDLE state in destroy")
Link: https://lore.kernel.org/r/1591191218-9446-1-git-send-email-ka-cheong.poon@oracle.com
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This ancient and unsafe method for memory registration is no longer used
by any RDMA based ULP. Remove the FMR pool API from the core driver.
Link: https://lore.kernel.org/r/4-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow a ULP to ask the core to provide a completion queue based on a
least-used search on a per-device CQ pools. The device CQ pools grow in a
lazy fashion when more CQs are requested.
This feature reduces the amount of interrupts when using many QPs. Using
shared CQs allows for more effcient completion handling. It also reduces
the amount of overhead needed for CQ contexts.
Test setup:
Intel(R) Xeon(R) Platinum 8176M CPU @ 2.10GHz servers.
Running NVMeoF 4KB read IOs over ConnectX-5EX across Spectrum switch.
TX-depth = 32. The patch was applied in the nvme driver on both the target
and initiator. Four controllers are accessed from each core. In the
current test case we have exposed sixteen NVMe namespaces using four
different subsystems (four namespaces per subsystem) from one NVM port.
Each controller allocated X queues (RDMA QPs) and attached to Y CQs.
Before this series we had X == Y, i.e for four controllers we've created
total of 4X QPs and 4X CQs. In the shared case, we've created 4X QPs and
only X CQs which means that we have four controllers that share a
completion queue per core. Until fourteen cores there is no significant
change in performance and the number of interrupts per second is less than
a million in the current case.
==================================================
|Cores|Current KIOPs |Shared KIOPs |improvement|
|-----|---------------|--------------|-----------|
|14 |2332 |2723 |16.7% |
|-----|---------------|--------------|-----------|
|20 |2086 |2712 |30% |
|-----|---------------|--------------|-----------|
|28 |1971 |2669 |35.4% |
|=================================================
|Cores|Current avg lat|Shared avg lat|improvement|
|-----|---------------|--------------|-----------|
|14 |767us |657us |14.3% |
|-----|---------------|--------------|-----------|
|20 |1225us |943us |23% |
|-----|---------------|--------------|-----------|
|28 |1816us |1341us |26.1% |
========================================================
|Cores|Current interrupts|Shared interrupts|improvement|
|-----|------------------|-----------------|-----------|
|14 |1.6M/sec |0.4M/sec |72% |
|-----|------------------|-----------------|-----------|
|20 |2.8M/sec |0.6M/sec |72.4% |
|-----|------------------|-----------------|-----------|
|28 |2.9M/sec |0.8M/sec |63.4% |
====================================================================
|Cores|Current 99.99th PCTL lat|Shared 99.99th PCTL lat|improvement|
|-----|------------------------|-----------------------|-----------|
|14 |67ms |6ms |90.9% |
|-----|------------------------|-----------------------|-----------|
|20 |5ms |6ms |-10% |
|-----|------------------------|-----------------------|-----------|
|28 |8.7ms |6ms |25.9% |
|===================================================================
Performance improvement with sixteen disks (sixteen CQs per core) is
comparable.
Link: https://lore.kernel.org/r/1590568495-101621-3-git-send-email-yaminf@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A pre-step for adding shared CQs. Add the infrastructure to prevent shared
CQ users from altering the CQ configurations. For now all cqs are marked
as private (non-shared). The core driver should use the new force
functions to perform resize/destroy/moderation changes that are not
allowed for users of shared CQs.
Link: https://lore.kernel.org/r/1590568495-101621-2-git-send-email-yaminf@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
kobject_init_and_add() takes reference even when it fails. If this
function returns an error, kobject_put() must be called to properly clean
up the memory associated with the object. Previous
commit b8eb718348 ("net-sysfs: Fix reference count leak in
rx|netdev_queue_add_kobject") fixed a similar problem.
Link: https://lore.kernel.org/r/20200528030231.9082-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IBTA declares "vendor option not supported" reject reason in REJ messages
if passive side doesn't want to accept proposed ECE options.
Due to the fact that ECE is managed by userspace, there is a need to let
users to provide such rejected reason.
Link: https://lore.kernel.org/r/20200526103304.196371-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma_accept() is called by both passive and active sides of CMID
connection to mark readiness to start data transfer. For passive side,
this is called explicitly, for active side, it is called implicitly while
receiving REP message.
Provide ECE data to rdma_accept function needed for passive side to send
that REP message.
Link: https://lore.kernel.org/r/20200526103304.196371-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ECE parameters are exchanged through REQ->REP/SIDR_REP messages, this
patch adds the data to provide to other side of CMID communication
channel.
Link: https://lore.kernel.org/r/20200526103304.196371-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Passive side of CMID connection receives ECE request through REQ message
and needs to respond with relevant REP message which will be forwarded to
active side.
The UCMA events interface is responsible for such communication with the
user space (librdmacm). Extend it to provide ECE wire data.
Link: https://lore.kernel.org/r/20200526103304.196371-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Active side of CMID initiates connection through librdmacm's
rdma_connect() and kernel's ucma_connect(). Extend UCMA interface to
handle those new parameters.
Link: https://lore.kernel.org/r/20200526103304.196371-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make use of the sizeof_field() helper instead of an open-coded version.
Link: https://lore.kernel.org/r/20200527144152.GA22605@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The allocated ports structure in never freed. The free function should be
called by release_cma_ports_group, but the group is never released since
we don't remove its default group.
Remove default groups when device group is deleted.
Fixes: 045959db65 ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce create/destroy QP commands over the ioctl interface to let it
be extended to get an asynchronous event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-8-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce create/destroy WQ commands over the ioctl interface to let it
be extended to get an asynchronous event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce create/destroy SRQ commands over the ioctl interface to let it
be extended to get an asynchronous event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend CQ to get its own asynchronous event FD.
The event FD is an optional attribute, in case wasn't given the ufile
event FD will be used.
Link: https://lore.kernel.org/r/20200519072711.257271-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Refactor related objects to use their own asynchronous event FD.
The ufile event FD will be the default in case an object won't have its own
event FD.
Link: https://lore.kernel.org/r/20200519072711.257271-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While creating a uobject every create reaches a point where the uobject is
fully initialized. For ioctls that go on to copy_to_user this means they
need to open code the destruction of a fully created uobject - ie the
RDMA_REMOVE_DESTROY sort of flow.
Open coding this creates bugs, eg the CQ does not properly flush the
events list when it does its error unwind.
Provide a uverbs_finalize_uobj_create() function which indicates that the
uobject is fully initialized and that abort should call to destroy_hw to
destroy the uobj->object and related.
Methods can call this function if they go on to have error cases after
setting uobj->object. Once done those error cases can simply do return,
without an error unwind.
Link: https://lore.kernel.org/r/20200519072711.257271-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into rdma.git for-next
Linux 5.7-rc6
Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.
Required for dependencies in the following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uverbs layer largely duplicate the code in ib_create_srq(), with the
slight difference that it passes in a udata. Move all the code together
into ib_create_srq_user() and provide an inline for kernel users, similar
to other create calls.
Link: https://lore.kernel.org/r/20200506082444.14502-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix create WQ to use the given user handle, in addition dropped some
duplicated code from this flow.
Fixes: fd3c7904db ("IB/core: Change idr objects to use the new schema")
Fixes: f213c05272 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/20200506082444.14502-9-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Both wq_context and srq_context are some leftover from the past in uverbs
layer, they are not really in use, drop them.
Link: https://lore.kernel.org/r/20200506082444.14502-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers need the 'get', so do it in a central place before returning
the pointer.
Link: https://lore.kernel.org/r/20200506074701.9775-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The only caller doesn't care about the timewait, so acquire and return the
cm_id_private from the function.
Link: https://lore.kernel.org/r/20200506074701.9775-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The way the cm_timewait_info is converted into a work and then freed
is very subtle and surprising, add a note clarifying the lifetime
here.
Link: https://lore.kernel.org/r/20200506074701.9775-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Also rename it to cm_remove_remote(). This function now removes the
tracking of the remote ID/QPN in the redblack trees from a cm_id_private.
Replace a open-coded version with a call. The open coded version was
deleting only the remote_id, however at this call site the qpn can not
have been in the RB tree either, so the cm_remove_remote() will do the
same.
Link: https://lore.kernel.org/r/20200506074701.9775-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While unlocking a spinlock held by the caller is a disturbing pattern,
this extensively duplicated code is even worse. Pull all the duplicates
into a function and explain the purpose of the algorithm.
The on creation side call in cm_req_handler() which is different has been
micro-optimized on the basis that the work_count == -1 during creation,
remove that and just use the normal function.
Link: https://lore.kernel.org/r/20200506074701.9775-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The 'goto out' label doesn't read ret, so don't set it.
Link: https://lore.kernel.org/r/20200506074701.9775-4-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This cannot happen, all callers pass in one of the two pointers. Use
a WARN_ON guard instead.
Link: https://lore.kernel.org/r/20200506074701.9775-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Under one path through ib_nl_fetch_ha() this calls nlmsg_new(GFP_KERNEL)
which is a sleeping call. This is a very rare path, so mark fetch_ha() and
the module external entry point that conditionally calls through to
fetch_ha() as might_sleep().
Link: https://lore.kernel.org/r/20200506074701.9775-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The librdmacm uses node_guid as identifier to correlate between IB devices
and CMA devices. However FW resets cause to such "connection" to be lost
and require from the user to restart its application.
Extend UCMA to return IB device index, which is stable identifier.
Link: https://lore.kernel.org/r/20200504132541.355710-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When multiple async FDs were allowed to exist the idea was for all
broadcast events to be delivered to all async FDs, however
IB_EVENT_DEVICE_FATAL was missed.
Instead of having ib_uverbs_free_hw_resources() special case the global
async_fd, have it cause the event during the uobject destruction. Every
async fd is now a uobject so simply generate the IB_EVENT_DEVICE_FATAL
while destroying the async fd uobject. This ensures every async FD gets a
copy of the event.
Fixes: d680e88e20 ("RDMA/core: Add UVERBS_METHOD_ASYNC_EVENT_ALLOC")
Link: https://lore.kernel.org/r/20200507063348.98713-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit below moved all of the destruction to the disassociate step and
cleaned up the event channel during destroy_uobj.
However, when ib_uverbs_free_hw_resources() pushes IB_EVENT_DEVICE_FATAL
and then immediately goes to destroy all uobjects this causes
ib_uverbs_free_event_queue() to discard the queued event if userspace
hasn't already read() it.
Unlike all other event queues async FD needs to defer the
ib_uverbs_free_event_queue() until FD release. This still unregisters the
handler from the IB device during disassociation.
Fixes: 3e032c0e92 ("RDMA/core: Make ib_uverbs_async_event_file into a uobject")
Link: https://lore.kernel.org/r/20200507063348.98713-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Do not decrease the reference count of resource tracker object twice in
the error flow of res_get_common_doit.
Fixes: c5dfe0ea6f ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The IB core pkey cache is populated by procedure ib_cache_update().
Initially, the pkey cache pointer is NULL. ib_cache_update allocates a
buffer and populates it with the device's pkeys, via repeated calls to
procedure ib_query_pkey().
If there is a failure in populating the pkey buffer via ib_query_pkey(),
ib_cache_update does not replace the old pkey buffer cache with the
updated one -- it leaves the old cache as is.
Since initially the pkey buffer cache is NULL, when calling
ib_cache_update the first time, a failure in ib_query_pkey() will cause
the pkey buffer cache pointer to remain NULL.
In this situation, any calls subsequent to ib_get_cached_pkey(),
ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to
dereference the NULL pkey cache pointer, causing a kernel panic.
Fix this by checking the ib_cache_update() return value.
Fixes: 8faea9fd4a ("RDMA/cache: Move the cache per-port data into the main ib_port_data")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If flow label is not set by the user or it's not IPv4, initialize it with
the cma src/dst based on the "Kernighan and Ritchie's hash function".
Link: https://lore.kernel.org/r/20200504051935.269708-5-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use rdma_flow_label_to_udp_sport to calculate the UDP source port of the
RoCEV2 packet.
Link: https://lore.kernel.org/r/20200504051935.269708-3-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.
This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.
If the add() callback fails, then do not call any more client ops for the
device, even remove.
Remove all the now redundant checks for NULL client_data in ops callbacks.
Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.
Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Snoop interface is not used. Remove it.
Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a call to rdma_lag_get_ah_roce_slave() when the address handle is
created. Lower driver can use it to select the QP's affinity port.
Link: https://lore.kernel.org/r/20200430192146.12863-15-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to get the RoCE LAG xmit slave by building skb of the RoCE
packet and call to master_get_xmit_slave. If driver wants to get the
slave assume all slaves are available, then need to set
RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags.
Link: https://lore.kernel.org/r/20200430192146.12863-14-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The call to ->lookup_put() was too early and it caused an unlock of the
read/write protection of the uobject after the FD was put. This allows a
race:
CPU1 CPU2
rdma_lookup_put_uobject()
lookup_put_fd_uobject()
fput()
fput()
uverbs_uobject_fd_release()
WARN_ON(uverbs_try_lock_object(uobj,
UVERBS_LOOKUP_WRITE));
atomic_dec(usecnt)
Fix the code by changing the order, first unlock and call to
->lookup_put() after that.
Fixes: 3832125624 ("IB/core: Add support for idr types")
Link: https://lore.kernel.org/r/20200423060122.6182-1-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function is local to cma.c, so let's limit its scope.
Link: https://lore.kernel.org/r/20200413132323.930869-1-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parsing verbs.c with kernel-doc produce some warnings:
./drivers/infiniband/core/verbs.c:2579: WARNING: Unexpected indentation.
./drivers/infiniband/core/verbs.c:2581: WARNING: Block quote ends without a blank line; unexpected unindent.
./drivers/infiniband/core/verbs.c:2613: WARNING: Unexpected indentation.
./drivers/infiniband/core/verbs.c:2579: WARNING: Unexpected indentation.
./drivers/infiniband/core/verbs.c:2581: WARNING: Block quote ends without a blank line; unexpected unindent.
./drivers/infiniband/core/verbs.c:2613: WARNING: Unexpected indentation.
Address them by adding an extra blank line and converting the parameters
on one of the arguments to a table.
Link: https://lore.kernel.org/r/4c5466d0f450c5a9952138150c3485740b37f9c5.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The xa_alloc_cyclic_irq() function returns either 0 or 1 on success and
negatives on error. This code treats 1 as an error and returns ERR_PTR(1)
which will cause an Oops in the caller.
Fixes: ae78ff3a0f ("RDMA/cm: Convert local_id_table to XArray")
Link: https://lore.kernel.org/r/20200407093714.GA80285@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If is_closed is set, and the event list is empty, then read() will return
-EIO without blocking. After setting is_closed in
ib_uverbs_free_event_queue(), we do trigger a wake_up on the poll_wait,
but the fops->poll() function does not check it, so poll will continue to
sleep on an empty list.
Fixes: 14e23bd6d2 ("RDMA/core: Fix locking in ib_uverbs_event_read")
Link: https://lore.kernel.org/r/0-v1-ace813388969+48859-uverbs_poll_fix%25jgg@mellanox.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The cm_reset_to_idle() call before formatting event changed the CM_ID
state from IB_CM_REQ_RCVD to be IB_CM_IDLE. It caused to wrong value of
CM_REJ_MESSAGE_REJECTED field.
The result of that was that rdma_reject() calls in the passive side didn't
generate RDMA_CM_EVENT_REJECTED event in the active side.
Fixes: 81ddb41f87 ("RDMA/cm: Allow ib_send_cm_rej() to be done under lock")
Link: https://lore.kernel.org/r/20200406173242.1465911-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The majority of the patches are cleanups, refactorings and clarity
improvements
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the new
ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces
-----BEGIN PGP SIGNATURE-----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=ae+a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The majority of the patches are cleanups, refactorings and clarity
improvements.
This cycle saw some more activity from Syzkaller, I think we are now
clean on all but one of those bugs, including the long standing and
obnoxious rdma_cm locking design defect. Continue to see many drivers
getting cleanups, with a few new user visible features.
Summary:
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't
working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the
new ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits)
RDMA/bnxt_re: make bnxt_re_ib_init static
IB/qib: Delete struct qib_ivdev.qp_rnd
RDMA/hns: Fix uninitialized variable bug
RDMA/hns: Modify the mask of QP number for CQE of hip08
RDMA/hns: Reduce the maximum number of extend SGE per WQE
RDMA/hns: Reduce PFC frames in congestion scenarios
RDMA/mlx5: Add support for RDMA TX flow table
net/mlx5: Add support for RDMA TX steering
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
IB/mlx5: Move to fully dynamic UAR mode once user space supports it
IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib
IB/mlx5: Extend QP creation to get uar page index from user space
IB/mlx5: Extend CQ creation to get uar page index from user space
IB/mlx5: Expose UAR object and its alloc/destroy commands
IB/hfi1: Get rid of a warning
RDMA/hns: Remove redundant judgment of qp_type
RDMA/hns: Remove redundant assignment of wc->smac when polling cq
RDMA/hns: Remove redundant qpc setup operations
RDMA/hns: Remove meaningless prints
...
The following modify sequence (loosely based on ipoib) will lose a pkey
modifcation:
- Modify (pkey index, port)
- Modify (new pkey index, NO port)
After the first modify, the qp_pps list will have saved the pkey and the
unit on the main list.
During the second modify, get_new_pps() will fetch the port from qp_pps
and read the new pkey index from qp_attr->pkey_index. The state will
still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state,
the new values will never replace the one in the qp pps list, losing the
new pkey.
This happens because the following if statements will never correct the
state because the first term will be false. If the code had been executed,
it would incorrectly overwrite valid values.
if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT))
new_pps->main.state = IB_PORT_PKEY_VALID;
if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) {
new_pps->main.port_num = qp_pps->main.port_num;
new_pps->main.pkey_index = qp_pps->main.pkey_index;
if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID)
new_pps->main.state = IB_PORT_PKEY_VALID;
}
Fix by joining the two if statements with an or test to see if qp_pps is
non-NULL and in the correct state.
Fixes: 1dd017882e ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Link: https://lore.kernel.org/r/20200313124704.14982.55907.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first switch statement in cm_destroy_id() tries to move the ID to
either IB_CM_IDLE or IB_CM_TIMEWAIT. Both states will block concurrent
MAD handlers from progressing.
Previous patches removed the unreliably lock/unlock sequences in this
flow, this patch removes the extra locking steps and adds the missing
parts to guarantee that destroy reaches IB_CM_IDLE. There is no point in
leaving the ID in the IB_CM_TIMEWAIT state the memory about to be kfreed.
Rework things to hold the lock across all the state transitions and
directly assert when done that it ended up in IB_CM_IDLE as expected.
This was accompanied by a careful audit of all the state transitions here,
which generally did end up in IDLE on their success and non-racy paths.
Link: https://lore.kernel.org/r/20200310092545.251365-16-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_sidr_rep() does is obtain the lock, so use the
usual unlocked wrapper, locked actor pattern here.
Get rid of the cm_reject_sidr_req() wrapper so each call site can call the
locked or unlocked version as required.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
Link: https://lore.kernel.org/r/20200310092545.251365-15-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_rej() does is obtain the lock, so use the usual
unlocked wrapper, locked actor pattern here.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
While here simplify some of the logic in the implementation.
Link: https://lore.kernel.org/r/20200310092545.251365-14-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_drep() does is obtain the lock, so use the
usual unlocked wrapper, locked actor pattern here.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
Link: https://lore.kernel.org/r/20200310092545.251365-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The first thing ib_send_cm_dreq() does is obtain the lock, so use the
usual unlocked wrapper, locked actor pattern here.
This avoids a sketchy lock/unlock sequence (which could allow state to
change) during cm_destroy_id().
Link: https://lore.kernel.org/r/20200310092545.251365-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These functions all touch state, so must be called under the lock.
Inspection shows this is currently true.
Link: https://lore.kernel.org/r/20200310092545.251365-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_crate_cm_id() immediately places the id in the xarray, and publishes it
into the remote_id and remote_qpn rbtrees. This makes it visible to other
threads before it is fully set up.
It appears the thinking here was that the states IB_CM_IDLE and
IB_CM_REQ_RCVD do not allow any MAD handler or lookup in the remote_id and
remote_qpn rbtrees to advance.
However, cm_rej_handler() does take an action on IB_CM_REQ_RCVD, which is
not really expected by the design.
Make the whole thing clearer:
- Keep the new cm_id out of the xarray until it is completely set up.
This directly prevents MAD handlers and all rbtree lookups from seeing
the pointer.
- Move all the trivial setup right to the top so it is obviously done
before any concurrency begins
- Move the mutation of the cm_id_priv out of cm_match_id() and into the
caller so the state transition is obvious
- Place the manipulation of the work_list at the end, under lock, after
the cm_id is placed in the xarray. The work_count cannot change on an
ID outside the xarray.
- Add some comments
Link: https://lore.kernel.org/r/20200310092545.251365-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_create_cm_id() immediately places the id in the xarray, so it is visible
to network traffic.
The state is initially set to IB_CM_IDLE and all the MAD handlers will
test this state under lock and refuse to advance from IDLE, so adding to
the xarray is harmless.
Further, the set to IB_CM_SIDR_REQ_RCVD also excludes all MAD handlers.
However, the local_id isn't even used for SIDR mode, and there will be no
input MADs related to the newly created ID.
So, make the whole flow simpler so it can be understood:
- Do not put the SIDR cm_id in the xarray. This directly shows that there
is no concurrency
- Delete the confusing work_count and pending_list manipulations. This
mechanism is only used by MAD handlers and timewait, neither of which
apply to SIDR.
- Add a few comments and rename 'cur_cm_id_priv' to 'listen_cm_id_priv'
- Move other loose sets up to immediately after cm_id creation so that
the cm_id is fully configured right away. This fixes an oversight where
the service_id will not be returned back on a IB_SIDR_UNSUPPORTED
reject.
Link: https://lore.kernel.org/r/20200310092545.251365-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The lock should not be dropped before doing the pr_debug() print as it is
accessing data protected by the lock, such as id.state.
Fixes: 119bf81793 ("IB/cm: Add debug prints to ib_cm")
Link: https://lore.kernel.org/r/20200310092545.251365-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any manipulation of cm_id->state must be done under the cm_id_priv->lock,
the two routines that added listens did not follow this rule, because they
never participate in any concurrent access around the state.
However, since this exception makes the code hard to understand, simplify
the flow so that it can be fully locked:
- Move manipulation of listen_sharecount into cm_insert_listen() so it is
trivially under the cm.lock without having to expose the cm.lock to the
caller.
- Push the cm.lock down into cm_insert_listen() and have the function
increment the reference count before returning an existing pointer.
- Split ib_cm_listen() into an cm_init_listen() and do not call
ib_cm_listen() from ib_cm_insert_listen()
- Make both ib_cm_listen() and ib_cm_insert_listen() directly call
cm_insert_listen() under their cm_id_priv->lock which does both a
collision detect and, if needed, the insert (atomically)
- Enclose all state manipulation within the cm_id_priv->lock, notice this
set can be done safely after cm_insert_listen() as no reader is allowed
to read the state without holding the lock.
- Do not set the listen cm_id in the xarray, as it is never correct to
look it up. This makes the concurrency simpler to understand.
Many needless error unwinds are removed in the process.
Link: https://lore.kernel.org/r/20200310092545.251365-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Too much of the destruction is very carefully sensitive to the state
and various other things. Move more code to the unconditional path and
add several WARN_ONs to check consistency.
Link: https://lore.kernel.org/r/20200310092545.251365-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When creating a cm_id during REQ the id immediately becomes visible to the
other MAD handlers, and shortly after the state is moved to IB_CM_REQ_RCVD
This allows cm_rej_handler() to run concurrently and free the work:
CPU 0 CPU1
cm_req_handler()
ib_create_cm_id()
cm_match_req()
id_priv->state = IB_CM_REQ_RCVD
cm_rej_handler()
cm_acquire_id()
spin_lock(&id_priv->lock)
switch (id_priv->state)
case IB_CM_REQ_RCVD:
cm_reset_to_idle()
kfree(id_priv->timewait_info);
goto destroy
destroy:
kfree(id_priv->timewait_info);
id_priv->timewait_info = NULL
Causing a double free or worse.
Do not free the timewait_info without also holding the
id_priv->lock. Simplify this entire flow by making the free unconditional
during cm_destroy_id() and removing the confusing special case error
unwind during creation of the timewait_info.
This also fixes a leak of the timewait if cm_destroy_id() is called in
IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in
ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to
release the timewait pointer.
Also fix a leak of the timewait_info if the caller mis-uses the API and
does ib_send_cm_reqs().
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The test here typod the cm_id_priv to use, it used the one that was
freshly allocated. By definition the allocated one has the matching
cm_handler and zero context, so the condition was always true.
Instead check that the existing listening ID is compatible with the
proposed handler so that it can be shared, as was originally intended.
Fixes: 067b171b86 ("IB/cm: Share listening CM IDs")
Link: https://lore.kernel.org/r/20200310092545.251365-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
xa_alloc_cyclic() is a SMP release to be paired with some later acquire
during xa_load() as part of cm_acquire_id().
As such, xa_alloc_cyclic() must be done after the cm_id is fully
initialized, in particular, it absolutely must be after the
refcount_set(), otherwise the refcount_inc() in cm_acquire_id() may not
see the set.
As there are several cases where a reader will be able to use the
id.local_id after cm_acquire_id in the IB_CM_IDLE state there needs to be
an unfortunate split into a NULL allocate and a finalizing xa_store.
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Peer to peer support was never implemented, so delete it to make code less
clutter.
Link: https://lore.kernel.org/r/20200310091438.248429-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The header file rdma_core.h is duplicate, so let's remove it.
Fixes: 622db5b643 ("RDMA/core: Add trace points to follow MR allocation")
Link: https://lore.kernel.org/r/20200310091656.249696-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The tgid used to be part of ib_umem_free_notifier(), when it was reworked
it got moved to release, but it should have been unconditional as all umem
alloc paths get the tgid.
As is, creating an implicit ODP will leak the tgid reference.
Link: https://lore.kernel.org/r/20200304181607.GA22412@ziepe.ca
Cc: stable@kernel.org
Fixes: f25a546e65 ("RDMA/odp: Use mmu_interval_notifier_insert()")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since RDMA rw API support operations with P2P memory sg list, make sure to
map/unmap the scatter list for signature operation correctly.
Link: https://lore.kernel.org/r/20200220100819.41860-2-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc5' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The dealloc_work_entries() function must update the work_free_list pointer
while freeing its entries, since potentially called again on same list. A
second iteration of the work list caused system crash. This happens, if
work allocation fails during cma_iw_listen() and free_cm_id() tries to
free the list again during cleanup.
Fixes: 922a8e9fb2 ("RDMA: iWARP Connection Manager.")
Link: https://lore.kernel.org/r/20200302181614.17042-1-bmt@zurich.ibm.com
Reported-by: syzbot+cb0c054eabfba4342146@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Registration of a mmu_notifier requires the caller to hold a mmget() on
the mm as registration is not permitted to race with exit_mmap(). There is
a BUG_ON inside the mmu_notifier to guard against this.
Normally creating a umem is done against current which implicitly holds
the mmget(), however an implicit ODP child is created from a pagefault
work queue and is not guaranteed to have a mmget().
Call mmget() around this registration and abort faulting if the MM has
gone to exit_mmap().
Before the patch below the notifier was registered when the implicit ODP
parent was created, so there was no chance to register a notifier outside
of current.
Fixes: c571feca2d ("RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'")
Link: https://lore.kernel.org/r/20200227114118.94736-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5cOX8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGw0AH/0nex1uEpzUTm+Gw
D8QPFr3y61sYLu7sIMVt39+Zl6OSxvOOX14QIM/mrNrzjjRI8EXGvYgES5gSO4on
6NLS6/64c1oQThDHCsxusKoSWLZ9KqP2vRPt7tZjn7DZMzEsuLhlINKBeupcqALX
FnOBr768P+if/j0WcDR2pBaMg3ch+XC5sfYav7kapjgWUqCx9BvrHKLXXdlEGUC0
7Ku7PH+nF7CIHiTay+i89odvOd8aLGsa/SUf5XGauKkH65VgQkmksgPeZUPqTnyC
MEsyLJLfn4AP3ySwqzfSLac8jqZG8FGBt4DgM2MQBHibctzfeMIznfcfh/A8+Edx
jqLKLAs=
=4075
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc4' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The algorithm pre-allocates a cm_id since allocation cannot be done while
holding the cm.lock spinlock, however it doesn't free it on one error
path, leading to a memory leak.
Fixes: 067b171b86 ("IB/cm: Share listening CM IDs")
Link: https://lore.kernel.org/r/20200221152023.GA8680@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200213010425.GA13068@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> # added a few more
In case the SGL was mapped for P2P DMA operation, we must unmap it using
pci_p2pdma_unmap_sg during the error unwind of rdma_rw_ctx_init()
Fixes: 7f73eac3a7 ("PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg()")
Link: https://lore.kernel.org/r/20200220100819.41860-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe