In function ks_wlan_set_rx_gain a cast to uint8_t is being used
to assign reception gain. 'rx_gain' field is defined as u8 so
replace the cast to the correct type
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ks_wlan_set_tx_gain a cast to uint8_t is being used
to assign transmission gain. 'tx_gain' field is defined as u8 so
replace the cast to the correct type.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some casts to uint8_t in ks_wlan_set_rate function to
assign values of the bitrate. Just change it to u8 which is the one
defined for the field 'body' of the struct which is in use.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameter 'size' in function ks_wlan_hw_rx is declared as
uint16_t and can be declared as size_t which makes more sense.
It is being passed to hif_align_size function which also expects
a size_t as parameter so just change its type. Also update two
casts in calls to this function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Header size and event fields of header are declared
as __le16 and being casted using uint16_t in cpu_to_le16.
Change cast to use preferred u16.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable 'byte' in ks7010_upload_firmware function is declared
as unsigned char and is only being used to read hardware
registers which are expected in sdio_read_byteb function as u8.
Change 'byte' variable type to u8 which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was two blank lines between definitions and statements
in ks7010_upload_firmware function. Remove one of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WPA_CAPABILITY_PREAUTH definition is not being used at all so
just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the ugly macro hack to make sure hw_stats and ethtool
strings are consisten, instead define a new struct which will hold the
stat string and his index within the hw_stats struct.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 'connect_resp_info' structure as most of its elements are not used.
Modified wilc_parse_assoc_resp_info() to directly parse and fill value
in connect_info structure variable. Remove use of 'assoc_resp_len' variable.
get_assoc_resp_cap_info() & get_asoc_id() functions are remove as its
not used anymore.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to have variable names as per linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 'flag' function parameter in wilc_mac_indicate() as only one
condition was handled using that parameter. Also removed unnecessary
call to wilc_mac_indicate() as no operation was performed in that
function call.
After above changes below macros are not required anymore.
WILC_MAC_INDICATE_STATUS 0x1
WILC_MAC_INDICATE_SCAN 0x2
This changes also helped in resolving the line over 80 chars issue
found by checkatpch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added new macro to resolve below checkpatch issues in linux_mon.
"Lines should not end with a '('"
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 chars issue found by checkpatch.pl script by placing
the comment message above the macro preprocessor.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the code to fix open parenthesis alignment issue reported by
checkpatch.pl script in del_station().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to avoid use of datatype in variable name to follow as
per linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters in connect() by using temporary variables.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issues found by checkpatch.pl script with
the help of local variable.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 character issue found by checkpatch.pl script in
add_key().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issue found by checkpatch.pl script in
function declaration.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issues reported by checkpatch.pl script in
wilc_wfi_cfg_tx_vendor_spec() by using temporary variable. Simplified
'if else' condition with 'if'.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor wilc_wfi_remain_on_channel_expired() to avoid line over 80
character issue reported by checkpatch.pl script. Also assigned value in the
variable at the time of declaration.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kmemdup instead of kmalloc & memcpy in add_network_to_shadow(). Also
added code to set 'ies_len' to zero in case of memory allocation
failure.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issue reported by checkpatch in
add_network_to_shadow() by using temporary variable.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of kmalloc and memcpy use kmemdup in handle_connect_timeout().
Also return -ENOMEM incase of failure to allocate the memory.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 characters issue in host_int_parse_assoc_resp_info() by
using shorter name for the local variable.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split host_int_parse_join_bss_param() to avoid the line over 80
character issue reported by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 char issue in host_int_handle_disconnect() by using
temp variable to hold the 'wilc_connect_result' function pointer.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line over 80 character issue found by checkpatch.pl script by
aligning the input argument in function call.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch reported issue of line over 80 char in handle_key().
Introduced new functions by spliting existing function to address the
checkpatch issue.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the use of unnecessary 'ret' variable and use existing 'result'
variable to hold the status. Also changed type of 'result' from s32 to
int to confirm with the function return type.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During memory allocation failure in handle_key() the complete() was not
called for comp_test_key_block event. So now added the code to call
complete() for event during error scenario.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quoted strings should not be split to help text grep in the source.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change fixes all the lines that get over 80 characters.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit replaces all the unsigned definitions in favour of 'unsigned
int' which is preferred.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We just need some integer handles that can map back to our message
struct when we're handling a reply, which struct idr is perfect for.
v2: Fix error check to look at the right variable.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'buf' is allocated with 'kvzalloc()'. 'kvfree()' must be used to free it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Fixes: 11c647caf7 ("staging: lustre: obdclass: variable llog chunk size")
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to error handling path before and after this one, we should go
to 'out_md_fid' here, instead of 'out_md', if 'obd_connect()' fails.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to spelling mistake in DEBUG_REQ message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under upstream staging commit 5a2ca43fa5, the list handling
code in kiblnd_handle_early_rxs() got changed to list_for_each_safe().
That protects against the current thread from deleting the current entry
it is looking at. It does not protect against another thread from deleting
the next item in the list (which the tmp variable points to). The way this
routine holds then releases a lock opens the door to other threads doing
just that.
This patch reverts this commit on this routine.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9886
Fixes: 5a2ca43fa5 ("Staging: lustre: Iterate list using list_for_each_entry")
Signed-off-by: Doug Oucharek <dougso@me.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7d7cdb4fa5 ("staging: most: video: remove debugging code") ended up
adding a bunch of build warnings about unused variables. Fix that up by
removing those variables as we don't need them anymore.
Cc: Abdun Nihaal <abdun.nihaal@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 7d7cdb4fa5 ("staging: most: video: remove debugging code")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos