The Exynos Chip ID driver on Exynos SoCs has so far only informational
purpose - to expose the SoC device in sysfs. No other drivers depend on
it so there is really no benefit of initializing it early.
The code would be the most flexible if converted to a regular driver.
However there is already another driver - Exynos ASV (Adaptive Supply
Voltage) - which binds to the device node of Chip ID.
The solution is to convert the Exynos Chip ID to a built in driver and
merge the Exynos ASV into it.
This has several benefits:
1. Although the Exynos ASV driver binds to a device node present in all
Exynos DTS (generic compatible), it fails to probe except on the
supported ones (only Exynos5422). This means that the regular boot
process has a planned/normal device probe failure.
Merging the ASV into Chip ID will remove this probe failure because
the final driver will always bind, just with disabled ASV features.
2. Allows to use dev_info() as the SoC bus is present (since
core_initcall).
3. Could speed things up because of execution of Chip ID code in a SMP
environment (after bringing up secondary CPUs, unlike early_initcall),
This reduces the amount of work to be done early, when the kernel has
to bring up critical devices.
5. Makes the Chip ID code defer-probe friendly,
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201207190517.262051-5-krzk@kernel.org
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
1. Clear unneeded L2C-310 flag which presenc was triggering warning
message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
Maintainers.
-----BEGIN PGP SIGNATURE-----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=Bkfy
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.10
1. Clear unneeded L2C-310 flag which presenc was triggering warning
message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
Maintainers.
* tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: exynos: clear L310_AUX_CTRL_NS_LOCKDOWN in default l2c_aux_val
Signed-off-by: Olof Johansson <olof@lixom.net>
This is the only part of plat-samsung that is really
shared between the s3c and s5p ports. Moving it to
drivers/soc/ lets us make them completely independent.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-16-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which
require coupling between "vdd_arm" and "vdd_int" regulators. This coupler
ensures that the voltage values don't go below the bootloader-selected
operation point during the boot process until the clients set their
constraints. It is achieved by assuming minimal voltage value equal to
the current value if no constraints are set. This also ensures proper
voltage balancing if any of the client driver is missing.
The balancing code comes from the regulator/core.c with the additional
logic for handling regulators without client constraints applied added.
Link: https://lore.kernel.org/r/20200721180900.13844-5-krzk@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.
"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names. Therefore they should be written with lowercase letters starting
with capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Adaptive Supply Voltage (ASV) driver adjusts CPU cluster operating
points depending on exact revision of an SoC retrieved from the CHIPID
block or the OTP memory. This allows for some power saving as for some
CPU clock frequencies we can lower CPU cluster's supply voltage comparing
to safe values common to all the SoC revisions.
This patch adds support for Exynos5422/5800 SoC, it is partially based
on code from https://github.com/hardkernel/linux repository,
branch odroidxu4-4.14.y, files: arch/arm/mach-exynos/exynos5422-asv.[ch].
Tested on Odroid XU3, XU4, XU3 Lite.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The chipid driver uses the MFD syscon API but it was not covered
properly in Kconfig.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Exynos SoCs have Chipid, for identification of product IDs and SoC
revisions. This patch intends to provide initialization code for all
these functionalities, at the same time it provides some sysfs entries
for accessing these information to user-space.
This driver uses existing binding for exynos-chipid.
Changes by Bartlomiej:
- fixed return values on errors
- removed bogus kfree_const()
- added missing Exynos4210 EVT0 id
- converted code to use EXYNOS_MASK define
- fixed np use after of_node_put()
- fixed too early use of dev_info()
- made driver fail for unknown SoC-s
- added SPDX tag
- updated Copyrights
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
[m.szyprowski: for suggestion and code snippet of product_id_to_soc_id]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[s.nawrocki: updated copyright date, removed uneeded headers inclusion]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Exynos Power Management Unit (PMU) drivers contain quite large
static arrays of register values necessary for given Exynos SoC to enter
low power mode. All this data is useless for ARMv8 SoC like
Exynos5433, because the image will not be shared between ARMv7 and
ARMv8.
Add additional Kconfig symbol for selecting the SoC-specific driver
addons thus skipping the useless data in the final image (this is
similar approach to chosen for Exynos clock controller drivers):
- exynos-pmu driver will be compiled on both architectures ARMv7
and ARMv8,
- additional driver_data for ARMv7 SoCs will not be built on ARMv8
and a macro will return NULL for them in of_device_id - this should
be safe as these compatibles cannot match on ARMv7 and driver
anyway handles NULL driver_data,
- on ARMv8 compile only exynos-pmu driver which exposes the
syscon-regmap for PMU address space.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Introduce a platform selectable symbol EXYNOS_PM_DOMAINS which can be
also toggled on by COMPILE_TEST for some build coverage.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Get some build coverage of Exynos PMU driver. It depends on
asm/cputype.h so its compilation is limited to ARM architectures.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
to "drivers/soc/samsung". This driver is mainly used for setting misc
bits of register from PMU IP of Exynos SoC which will be required to
configure before Suspend/Resume. Currently all these settings are done
in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
support, there is a need of this PMU driver in driver/* folder.
This driver uses existing DT binding information and there should
be no functionality change in the supported platforms.
Signed-off-by: Amit Daniel Kachhap <amitdanielk@gmail.com>
[tested on Peach-Pi (Exynos5880)]
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)]
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Rebased, add necessary infrastructure for building and
selecting drivers/soc because original patchset was on top of movement
SROMc to drivers/soc]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Krzysztof Kozlowski