Add dynamic debug for debugging sensors states during
initialization, stop, suspend and resume.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for power management routines.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Earlier platforms don’t have sensor status checking mechanism.
Sensors are always enabled without checking sensor status.
Hence invoke hid probe only after the sensor is enabled by
checking sensor status.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sometimes sensor enable/disable may take time, without checking the
actual status bits from MP2 FW can lead the amd-sfh to misbehave.
Hence add a status check of enable/disable command
by waiting on the command response before sending the next
command to FW.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Existing amd-sfh driver is programming the MP2 firmware period field in
units of jiffies, but the MP2 firmware expects in milliseconds unit.
Changing it to milliseconds.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
amd_stop_sensor_v2 accidentally used a different MMIO register than
amd_start_sensor_v2 for the DMA address.
Fixes: f264481ad6 ("HID: amd_sfh: Extend driver capabilities for multi-generation support")
Signed-off-by: Dylan MacKenzie <ecstaticmorse@gmail.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add Human Presence Detection (HPD) sensors support
on AMD next generation HPD supported platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extend ALS support for AMD next generation SoC's like Renoir, Cezanne.
AMD next generation platforms use C2P message register to read ALS
sensor data instead of DRAM address.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Initial driver support only covered the first generation of SFH
platforms. In order to support the future generations introduce
ops selection to distinguish the different platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Replace kzalloc with devm_kzalloc in driver initialization sequence. The
allocation can be tied to the lifetime of the amd_sfh driver. This cleans
up an exit & error paths, since the objects does not need to be
explicitly freed anymore.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some BIOS-es do not initialize the activestatus bits of the AMD_P2C_MSG3
register. This cause the AMD_SFH driver to not register any sensors even
though the laptops in question do have sensors.
Add a DMI quirk-table for specifying sensor-mask overrides based on
DMI match, to make the sensors work OOTB on these laptop models.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a sensor_mask module parameter which can be used to override the
sensor-mask read from the activestatus bits of the AMD_P2C_MSG3
registers. Some BIOS-es do not program the activestatus bits, leading
to the AMD-SFH driver not registering any HID devices even though the
laptop in question does actually have sensors.
While at it also fix the wrong indentation of the MAGNO_EN define.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Suggested-by: Richard Neumann <mail@richard-neumann.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This value is only used once inside amd_mp2_get_sensor_num(),
so there is no need to store this in the amd_mp2_dev struct,
amd_mp2_get_sensor_num() can simple use a local variable for this.
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The new driver uses a phys_addr_t to store a DMA address,
which does not work when the two are different size:
drivers/hid/amd-sfh-hid/amd_sfh_client.c:157:11: error: incompatible pointer types passing 'phys_addr_t *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
&cl_data->sensor_phys_addr[i],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:393:15: note: passing argument to parameter 'dma_handle' here
dma_addr_t *dma_handle, gfp_t gfp)
^
Change both the type and the variable name to dma_addr for consistency.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the check for the error return code -ERESTARTSYS is dead code
and never executed because a previous check for ret < 0 is catching this
and returning -ETIMEDOUT instead. Fix this by checking for -ERESTARTSYS
before the more generic negative error code.
Addresses-Coverity: ("Logically dead code")
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It appears like the accelerometer/magnetometer and gyroscope indices were
interchanged in the patch series which got into for-5.11/amd-sfh-hid until
Mandoli/Richard reported to us. Ideally sensor indices should be 0,1,2 for the
accelerometer, Gyroscope, Magnetometer respectively, but this interchanged
possibly could be because i was using a test MP2 firmware on my machine.
This patch fixes the earlier commit with the right sensor indices and also
removing unused structures _hid_report_descriptor, _hid_device_descriptor as
reported by Richard.
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub 4f567b9f8141")
Reported-by: Mandoli <lipheng@hanmail.net>
Reported-by: Richard Neumann <mail@richard-neumann.de>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Communication between HID devices and HID core is mostly done
via HID reports. HID reports are formed based on the data received
from the PCI layer into the HID report descriptors.
Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To support AMD Sensor Fusion Hub (SFH) via the HID client's we need to
register the client with the HID framework. Here we mostly address on
how to register the client with the framework and define the interfaces
for communication.
Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
AMD SFH (Sensor Fusion Hub) is a solution running on MP2
(which is ARM core connected to x86 for processing sensor data).
AMD SFH uses HID over PCI bus to form the HID descriptors and
talks to HID clients like the monitor-sensor/iio-proxy. MP2 which
is exposed as a PCI device to the x86, uses mailboxes to talk to
MP2 firmware to send/receive commands.
Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina