Commit Graph

9 Commits

Author SHA1 Message Date
Zoltan HERPAI e721a28716 ARM: dts: pcduino: Enable user LED and button support for pcDuino
The pcDuino board has LEDs connected to PH15/PH16, and back/home/menu
buttons to PH17/18/19 respectively. Enable these via gpio-leds and
gpio-keys. This is shared across the v1 and v2 versions of the board.

Tested on a v2 and verified against the schematics of a v1.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
[Maxime: Added some newlines between the button nodes]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:59:08 +01:00
Maxime Ripard bca12924f0 ARM: sunxi: DT: convert DTs to use common GPIOs includes
Replace the various raw GPIO flags by their definition in the common
dt-bindings header.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:58:56 +01:00
Maxime Ripard 7145570159 ARM: sunxi: DT: Convert to device tree includes
Prepare the device trees to use the C preprocessor.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:58:55 +01:00
Maxime Ripard a35070ddde ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11
The current GPL only licensing on the DTSI makes it very impractical for other
software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense our
device trees under a GPL/X11 dual-license.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Carlo Caione <carlo@caione.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Zoltan HERPAI <wigyori@uid0.hu>
2014-11-05 09:07:48 +01:00
Carlo Caione e288f1bac4 ARM: dts: sun4i: Add AXP209 support to various boards
At a node for the axp209, and where necessary the i2c controller to the dts
for various boards. Note the axp209 regulators are omitted as we don't have
any use for them yet, and on some boards were not sure how exactly they are
wired up.

Adding support for just the axp209 without the regulators is still useful, as
it will give us power-button and poweroff support.

Signed-off-by: Carlo Caione <carlo@caione.org>
[hdegoede@redhat.com: Drop the regulator bits for now]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-01 09:48:54 +02:00
Hans de Goede a4da476b6c ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-11 19:07:00 +02:00
Hans de Goede c0955a86f4 ARM: dts: sun4i: Enable mmc controller on various A10 boards
Tested on a subset of these boards, for the others boards the settings match
the ones of the tested boards according to the original firmware fex files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 22:52:17 -05:00
Hans de Goede 77978a3728 ARM: sun4i: dt: Add USB host nodes to pcduino.dts
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04 17:45:23 +01:00
Zoltan HERPAI 7f624cecb7 ARM: sun4i: dt: Add basic board support for LinkSprite pcDuino
This patch will add a basic board support DT for the
LinkSprite pcDuino board.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-03 13:45:24 +01:00