If the source m-port of a packet in __ef100_rx_packet() is a VF,
hand off the packet to the corresponding representor with
efx_ef100_rep_rx_packet().
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If not, for now drop them and warn. A subsequent patch will look up
the source m-port to try and find a representor to deliver them to.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Traffic delivered to the (MAE admin) PF could be from either the wire
or a VF. The INGRESS_MPORT field of the RX prefix distinguishes these;
base_mport is the value this field will have for traffic from the wire
(which should be delivered to the PF's netdevice, not a representor).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Representor RX uses a NAPI context driven by a 'fake interrupt': when
the parent PF receives a packet destined for the representor, it adds
it to an SKB list (efv->rx_list), and schedules NAPI if the 'fake
interrupt' is primed. The NAPI poll then pulls packets off this list
and feeds them to the stack with netif_receive_skb_list().
This scheme allows us to decouple representor RX from the parent PF's
RX fast-path.
This patch implements the 'top half', which builds an SKB, copies data
into it from the RX buffer (which can then be released), adds it to
the queue and fires the 'fake interrupt' if necessary.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the 'bottom half' napi->poll routine for representor RX.
See the next patch (with the top half) for an explanation of the 'fake
interrupt' scheme used to drive this NAPI context.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement .ndo_get_stats64() method to read values out of struct
efx_rep_sw_stats.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "ret" variable needs to be initialized at the start.
Fixes: 52323ef754 ("net: marvell: prestera: add phylink support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuKeBBuGtsmd7QdT@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use "jiffies != now" to replace "jiffies - now > 0" to make
code more readable. We want to put a limit on how long the
loop can run for before rescheduling.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220729061712.22666-1-yuzhe@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fourth set of patches for v5.20, last few patches before the merge
window. Only driver changes this time, mostly just fixes and cleanup.
Major changes:
brcmfmac
* support brcm,ccode-map-trivial DT property
wcn36xx
* add debugfs file to show firmware feature strings
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmLkNBQRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZudPggApmxPMrdOV2RzCQI48SvmR1KiP8GnN9nw
08hIky9yRFz+feNfoXic4XAxSlYmHpOlByBQO8GzpejsCE7OUH9d4xRrXyIj21sx
bP8PhKg50H5UKZCD0laLRe1vjoSFOcXzTUh+B03IaLVof0Ky6C9N2oS6qF+oyrBs
yBqZE2idJEqrqYkEvhbdt0201tKh/ePEbcvfJ8CU5HinoX+q6Pqb1xlsqTy8mJ8H
6OO8wNEwVncwDZLq1dRvKEAgR4w/Zye5s+fTaO9j8X1GfTFncBWc4XYjnxOHuV1i
4PrVN1tgYhSMWD0JEJifoox3mORO9MIL5loPqufPfYAs98iBa9TtPQ==
=pvLH
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.20
Fourth set of patches for v5.20, last few patches before the merge
window. Only driver changes this time, mostly just fixes and cleanup.
Major changes:
brcmfmac
- support brcm,ccode-map-trivial DT property
wcn36xx
- add debugfs file to show firmware feature strings
* tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (36 commits)
wifi: rtw88: check the return value of alloc_workqueue()
wifi: rtw89: 8852a: adjust IMR for SER L1
wifi: rtw89: 8852a: update RF radio A/B R56
wifi: wcn36xx: Add debugfs entry to read firmware feature strings
wifi: wcn36xx: Move capability bitmap to string translation function to firmware.c
wifi: wcn36xx: Move firmware feature bit storage to dedicated firmware.c file
wifi: wcn36xx: Rename clunky firmware feature bit enum
wifi: brcmfmac: prevent double-free on hardware-reset
wifi: brcmfmac: support brcm,ccode-map-trivial DT property
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map-trivial
wifi: brcmfmac: Replace default (not configured) MAC with a random MAC
wifi: brcmfmac: Add brcmf_c_set_cur_etheraddr() helper
wifi: brcmfmac: Remove #ifdef guards for PM related functions
wifi: brcmfmac: use strreplace() in brcmf_of_probe()
wifi: plfxlc: Use eth_zero_addr() to assign zero address
wifi: wilc1000: use existing iftype variable to store the interface type
wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPI
wifi: wilc1000: cancel the connect operation during interface down
wifi: wilc1000: get correct length of string WID from received config packet
wifi: wilc1000: set station_info flag only when signal value is valid
...
====================
Link: https://lore.kernel.org/r/20220729192832.A5011C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko says:
====================
bpf-next 2022-07-29
We've added 22 non-merge commits during the last 4 day(s) which contain
a total of 27 files changed, 763 insertions(+), 120 deletions(-).
The main changes are:
1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper,
from Paul Chaignon.
2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong.
3) Fix for XDP frame length calculation, from Lorenzo Bianconi.
4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate
s390x quirks with socketcall(), from Ilya Leoshkevich.
5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI,
from Daniel Müller.
6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai.
7) Fix allocation warnings in netdevsim, from Jakub Kicinski.
8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton.
9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev.
10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei,
Jörn-Thorben Hinz, Yang Li.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits)
bpf: Remove unneeded semicolon
libbpf: Add bpf_obj_get_opts()
netdevsim: Avoid allocation warnings triggered from user space
bpf: Fix NULL pointer dereference when registering bpf trampoline
bpf: Fix test_progs -j error with fentry/fexit tests
selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout
bpftool: Don't try to return value from void function in skeleton
bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro
bpf: btf: Fix vsnprintf return value check
libbpf: Support PPC in arch_specific_syscall_pfx
selftests/bpf: Adjust vmtest.sh to use local kernel configuration
selftests/bpf: Copy over libbpf configs
selftests/bpf: Sort configuration
selftests/bpf: Attach to socketcall() in test_probe_user
libbpf: Extend BPF_KSYSCALL documentation
bpf, devmap: Compute proper xdp_frame len redirecting frames
bpf: Fix bpf_xdp_pointer return pointer
selftests/bpf: Don't assign outer source IP to host
bpf: Set flow flag to allow any source IP in bpf_tunnel_key
geneve: Use ip_tunnel_key flow flags in route lookups
...
====================
Link: https://lore.kernel.org/r/20220729230948.1313527-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an extensible variant of bpf_obj_get() capable of setting the
`file_flags` parameter.
This parameter is needed to enable unprivileged access to BPF maps.
Without a method like this, users must manually make the syscall.
Signed-off-by: Joe Burton <jevburton@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com
When multiple threads are attaching/detaching fentry/fexit programs to
the same trampoline, we may call register_fentry on the same trampoline
twice: register_fentry(), unregister_fentry(), then register_fentry again.
This causes ftrace_set_filter_ip() for the same ip on tr->fops twice,
which leaves duplicated ip in tr->fops. The extra ip is not cleaned up
properly on unregister and thus causes failures with further register in
register_ftrace_direct_multi():
register_ftrace_direct_multi()
{
...
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
if (ftrace_find_rec_direct(entry->ip))
goto out_unlock;
}
}
...
}
This can be triggered with parallel fentry/fexit tests with test_progs:
./test_progs -t fentry,fexit -j
Fix this by resetting tr->fops in ftrace_set_filter_ip(), so that there
will never be duplicated entries in tr->fops.
Fixes: 00963a2e75 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729194106.1207472-1-song@kernel.org
The send_signal/send_signal_tracepoint is pretty flaky, with at least
one failure in every ten runs on a few attempts I've tried it:
> test_send_signal_common:PASS:pipe_c2p 0 nsec
> test_send_signal_common:PASS:pipe_p2c 0 nsec
> test_send_signal_common:PASS:fork 0 nsec
> test_send_signal_common:PASS:skel_open_and_load 0 nsec
> test_send_signal_common:PASS:skel_attach 0 nsec
> test_send_signal_common:PASS:pipe_read 0 nsec
> test_send_signal_common:PASS:pipe_write 0 nsec
> test_send_signal_common:PASS:reading pipe 0 nsec
> test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
> test_send_signal_common:FAIL:incorrect result unexpected incorrect result: actual 48 != expected 50
> test_send_signal_common:PASS:pipe_write 0 nsec
> #139/1 send_signal/send_signal_tracepoint:FAIL
The reason does not appear to be a correctness issue in the strict
sense. Rather, we merely do not receive the signal we are waiting for
within the provided timeout.
Let's bump the timeout by a factor of ten. With that change I have not
been able to reproduce the failure in 150+ iterations. I am also sneaking
in a small simplification to the test_progs test selection logic.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220727182955.4044988-1-deso@posteo.net
A skeleton generated by bpftool previously contained a return followed
by an expression in OBJ_NAME__detach(), which has return type void. This
did not hurt, the bpf_object__detach_skeleton() called there returns
void itself anyway, but led to a warning when compiling with e.g.
-pedantic.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220726133203.514087-1-jthinz@mailbox.tu-berlin.de
Use the ARRAY_SIZE macro and make the code more compact.
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220726093045.3374026-1-clementwei90@163.com
vsnprintf returns the number of characters which would have been written if
enough space had been available, excluding the terminating null byte. Thus,
the return value of 'len_left' means that the last character has been
dropped.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220711211317.GA1143610@laptop
The function alloc_workqueue() in rtw_core_init() can fail, but
there is no check of its return value. To fix this bug, its return value
should be checked with new error handling code.
Fixes: fe101716c7 ("rtw88: replace tx tasklet with work queue")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220723063756.2956189-1-williamsukatube@163.com
SER (system error recovery) L1 (level 1) has a step-by-step handshake
process with FW. These handshakes still rely on B_AX_HS0ISR_IND_INT_EN.
So, even already during recovery, we enable this bit in IMR.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220721074952.19676-1-pkshih@realtek.com
Move wcn36xx_get_cap_name() function in main.c into firmware.c as
wcn36xx_firmware_get_cap_name().
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-4-bryan.odonoghue@linaro.org
The naming of the get/set/clear firmware feature capability bits doesn't
really follow the established namespace pattern of
wcn36xx_logicalblock_do_something();
The feature bits are accessed by smd.c and main.c. It would be nice to
display the found feature bits in debugfs. To do so though we should tidy
up the namespace a bit.
Move the firmware feature exchange API to its own file - firmware.c giving
us the opportunity to functionally decompose other firmware related
accessors as appropriate in future.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-3-bryan.odonoghue@linaro.org
The enum name "place_holder_in_cap_bitmap" is self descriptively asking to
be changed to something else.
Rename place_holder_in_cap_bitmap to wcn36xx_firmware_feat_caps so that the
contents and intent of the enum is obvious.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-2-bryan.odonoghue@linaro.org
Lorenzo Bianconi says:
====================
mtk_eth_soc: introduce xdp multi-frag support
Convert mtk_eth_soc driver to xdp_return_frame_bulk APIs.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert mtk_eth_soc driver to xdp_return_frame_bulk APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the capability to map non-linear xdp frames in XDP_TX and
ndo_xdp_xmit callback.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preliminary patch to add xdp multi-frag support to mtk_eth_soc
driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer says:
====================
seg6: add support for SRv6 Headend Reduced
This patchset adds support for SRv6 Headend behavior with Reduced
Encapsulation. It introduces the H.Encaps.Red and H.L2Encaps.Red versions
of the SRv6 H.Encaps and H.L2Encaps behaviors, according to RFC 8986 [1].
In details, the patchset is made of:
- patch 1/4: add support for SRv6 H.Encaps.Red behavior;
- Patch 2/4: add support for SRv6 H.L2Encaps.Red behavior;
- patch 2/4: add selftest for SRv6 H.Encaps.Red behavior;
- patch 3/4: add selftest for SRv6 H.L2Encaps.Red behavior.
The corresponding iproute2 patch for supporting SRv6 H.Encaps.Red and
H.L2Encaps.Red behaviors is provided in a separated patchset.
[1] - https://datatracker.ietf.org/doc/html/rfc8986
V4 -> v5:
- Fix skb checksum for SRH Reduced encapsulation/insertion;
- Improve selftests by:
i) adding a random suffix to network namespaces;
ii) creating net devices directly into network namespaces;
iii) using trap EXIT command to properly clean up selftest networks.
Thanks to Paolo Abeni.
v3 -> v4:
- Add selftests to the Makefile, thanks to Jakub Kicinski.
v2 -> v3:
- Keep SRH when HMAC TLV is present;
- Split the support for H.Encaps.Red and H.L2Encaps.Red behaviors in two
patches (respectively, patch 1/4 and patch 2/4);
- Add selftests for SRv6 H.Encaps.Red and H.L2Encaps.Red.
v1 -> v2:
- Fixed sparse warnings;
- memset now uses sizeof() instead of hardcoded value;
- Removed EXPORT_SYMBOL_GPL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This selftest is designed for testing the H.L2Encaps.Red behavior. It
instantiates a virtual network composed of several nodes: hosts and SRv6
routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test considers SRv6 routers implementing a L2 VPN leveraged by hosts
for communicating with each other. Such routers make use of the SRv6
H.L2Encaps.Red behavior for applying SRv6 policies to L2 traffic coming
from hosts.
The correct execution of the behavior is verified through reachability
tests carried out between hosts belonging to the same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
This selftest is designed for testing the H.Encaps.Red behavior. It
instantiates a virtual network composed of several nodes: hosts and SRv6
routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test considers SRv6 routers implementing L3 VPNs leveraged by hosts
for communicating with each other. Such routers make use of the SRv6
H.Encaps.Red behavior for applying SRv6 policies to L3 traffic coming
from hosts.
The correct execution of the behavior is verified through reachability
tests carried out between hosts belonging to the same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SRv6 H.L2Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.L2Encaps behavior [2].
H.L2Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.4
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.3
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SRv6 H.Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.Encaps behavior [2].
H.Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.2
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.1
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit '2c5a5748105a ("vmxnet3: add support for out of order rx
completion")' added support for out of order rx completion. Within
that patch, an enhancement was done to reschedule napi for processing
rx completions.
However, it can lead to missing an interrupt. So, this patch reverts
that part of the code.
Fixes: 2c5a574810 ("vmxnet3: add support for out of order rx completion")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tcp_reflect_tos option was introduced in Linux 5.10 but was still
undocumented.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User can use AF_PACKET socket to send packets with the length of 0.
When min_header_len equals to 0, packet_snd will call __dev_queue_xmit
to send packets, and sock->type can be any type.
Reported-by: syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com
Fixes: fd18942244 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Add PTP support for Spectrum-2 and newer ASICs
This patchset adds PTP support for Spectrum-{2,3,4} switch ASICs. They
all act largely the same with respect to PTP except for a workaround
implemented for Spectrum-{2,3} in patch #6.
Spectrum-2 and newer ASICs essentially implement a transparent clock
between all the switch ports, including the CPU port. The hardware will
generate the UTC time stamp for transmitted / received packets at the
CPU port, but will compensate for forwarding delays in the ASIC by
adjusting the correction field in the PTP header (for PTP events) at the
ingress and egress ports.
Specifically, the hardware will subtract the current time stamp from the
correction field at the ingress port and will add the current time stamp
to the correction field at the egress port. For the purpose of an
ordinary or boundary clock (this patchset), the correction field will
always be adjusted between the CPU port and one of the front panel
ports, but never between two front panel ports.
Patchset overview:
Patch #1 extracts a helper to configure traps for PTP packets (event and
general messages). The helper is shared between all Spectrum
generations.
Patch #2 transitions Spectrum-2 and newer ASICs to use a different
format of Tx completions that includes the UTC time stamp of transmitted
packets.
Patch #3 adds basic initialization required for Spectrum-2 PTP support.
It mainly invokes the helper from patch #1.
Patch #4 adds helpers to read the UTC time (seconds and nanoseconds)
from the device over memory-mapped I/O instead of going through firmware
which is slower and therefore inaccurate. The helpers will be used to
implement various PHC operations (e.g., gettimex64) and to construct the
full UTC time stamp from the truncated one reported over Tx / Rx
completions.
Patch #5 implements the various PHC operations.
Patch #6 implements the previously described workaround for
Spectrum-{2,3}.
Patch #7 adds the ability to report a hardware time stamp for a received
/ transmitted packet based off the associated Rx / Tx completion that
includes a truncated UTC time stamp.
Patches #8 and #9 implement support for the SIOCGHWTSTAMP /
SIOCSHWTSTAMP ioctls and the get_ts_info ethtool callback, respectively.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'get_ts_info' callback is used for obtaining information about
time stamping and PTP hardware clock capabilities of a network device.
The existing function of Spectrum-1 is used to advertise the PHC
capabilities and the supported RX and TX filters. Implement a similar
function for Spectrum-2, expose that the supported 'rx_filters' are all
PTP event packets, as for these packets the driver fills the time stamp
from the CQE in the SKB.
In the future, mlxsw driver will be extended to support one-step PTP in
Spectrum-2 and newer ASICs. Then additional 'tx_types' will be supported.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SIOCSHWTSTAMP ioctl configures HW timestamping on a given port. In
Spectrum-2 and above, each packet gets time stamp by default, but in
order to provide an accurate time stamp, software should configure to
update the correction field. In addition, the PTP traps are not enabled
by default, software should enable it per port or for all ports.
The switch behaves like a transparent clock between CPU port and each
front panel port. If ingress correction is set on a port for a given packet
type, then when such a packet is received via the port, the current time
stamp is subtracted from the correction field. If egress correction is set
on a port for a given packet type, then when such a packet is transmitted
via the port, the current time stamp is added to the correction field.
The result is that as the packet ingresses through a port with ingress
correction enabled, and egresses through a port with egress correction
enabled, the PTP correction field is updated to reflect the time that the
packet spent in the ASIC.
This can be used to update the correction field of trapped packets by
enabling ingress correction on a port where time stamping was enabled,
and egress correction on the CPU port. Similarly, for packets transmitted
from the host, ingress correction should be enabled on the CPU port, and
egress correction on a front-panel port.
However, since the correction fields will be updated for all PTP packets
crossing the CPU port, in order not to mangle the correction field, the
front panel port involved in the packet transfer must have the
corresponding correction enabled as well.
Therefore, when HW timestamping is enabled on at least one port, we have
to configure hardware to update the correction field and trap PTP event
packets on all ports.
Add reference count as part of 'struct mlxsw_sp_ptp_state', to maintain
how many ports use HW timestamping. Handle the correction field
configuration only when the first port enables time stamping and when the
last port disables time stamping. Store the configuration as part of
'struct mlxsw_sp_ptp_state', as it is global for all ports.
The SIOCGHWTSTAMP ioctl is a getter for the current configuration,
implement it and use the global configuration.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As opposed to Spectrum-1, in which time stamps arrive through a pair of
dedicated events into a queue and later are being matched to the
corresponding packets, in Spectrum-2 we are reading the time stamps
directly from the CQE. Software can get the time stamp in UTC format
using CQEv2.
Add a time stamp field to 'struct mlxsw_skb_cb'. In
mlxsw_pci_cqe_{rdq,sdq}_handle() extract the time stamp from the CQE into
the new time stamp field. Note that the time stamp in the CQE is
represented by 38 bits, which is a short representation of UTC time.
Software should create the full time stamp using the global UTC clock.
Read UTC clock from hardware only for PTP packets which were trapped to CPU
with PTP0 trap ID (event packets).
Use the time stamp from the SKB when packet is received or transmitted.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, PTP packets which require time stamp, should be sent as data
packets with the following details:
1. FID valid = 1
2. FID value above the maximum FID
3. rx_router_port = 1
>From Spectrum-4 and on, this limitation will be solved.
Extend the function which handles TX header, in case that the packet is
a PTP packet, add TX header with type=data and all the above mentioned
requirements. Add operation as part of 'struct mlxsw_sp_ptp_ops', to be
able to separate the handling of PTP packets between different ASICs. Use
the data packet solution only for Spectrum-2 and Spectrum-3. Therefore, add
a dedicated operation structure for Spectrum-4, as it will be same to
Spectrum-2 in PTP implementation, just will not have the limitation of
control packets.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement physical hardware clock operations. The main difference between
the existing operations of Spectrum-1 and the new operations of Spectrum-2
is the usage of UTC hardware clock instead of FRC.
Add support for init() and fini() functions for PTP clock in Spectrum-2.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Query UTC sec and nsec PCI offsets during the pci_init(), to be able to
read UTC time later.
Implement functions to read UTC seconds and nanoseconds from the offset
which was read as part of initialization.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lay the groundwork for Spectrum-2 support. On Spectrum-2, the packets get
the time stamps from the CQE, which means that the time stamp is attached
to its packet.
Configure MTPTPT to set which message types should arrive under which
PTP trap. PTP0 will be used for event message types, which means that
the packets require time stamp. PTP1 will be used for other packets.
Note that in Spectrum-2, all packets contain time stamp by default. The two
types of traps (PTP0, PTP1) will be used to separate between PTP_EVENT
traps and PTP_GENERAL traps, so then the driver will fill the time stamp as
part of the SKB only for event message types.
Later the driver will enable the traps using 'MTPCPC.ptp_trap_en' bit.
Then, PTP packets start arriving through the PTP traps.
Currently, the structure 'mlxsw_sp2_ptp_state' contains only the common
structure, the next patches will extend it.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, Tx completions are reported using Completion Queue Element
version 1 (CQEv1). These elements do not contain the Tx time stamp,
which is fine as Spectrum-1 reads Tx time stamps via a dedicated FIFO
and Spectrum-2 does not currently support PTP.
In preparation for Spectrum-2 PTP support, use CQEv2 for Spectrum-2 and
newer ASICs, as this CQE format encodes the Tx time stamp.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MTPTPT register is used to set which message types should arrive under
which PTP trap. Currently, PTP0 is used for event message types, which
means that the packets require time stamp. PTP1 is used for other packets.
This configuration will be same for Spectrum-2 and newer ASICs. In
preparation for Spectrum-2 PTP support, add helper functions to
configure PTP traps and use them for Spectrum-1. These functions will be
used later also for Spectrum-2.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164130.385411-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree