Commit Graph

4201 Commits

Author SHA1 Message Date
Hannes Frederic Sowa 5f40ef77ad ipv6: do retries on stable privacy addresses
If a DAD conflict is detected, we want to retry privacy stable address
generation up to idgen_retries (= 3) times with a delay of idgen_delay
(= 1 second). Add the logic to addrconf_dad_failure.

By design, we don't clean up dad failed permanent addresses.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 22:12:09 -04:00
Hannes Frederic Sowa 8e8e676d0b ipv6: collapse state_lock and lock
Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 22:12:09 -04:00
Hannes Frederic Sowa 64236f3f3d ipv6: introduce IFA_F_STABLE_PRIVACY flag
We need to mark appropriate addresses so we can do retries in case their
DAD failed.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 22:12:09 -04:00
Hannes Frederic Sowa 622c81d57b ipv6: generation of stable privacy addresses for link-local and autoconf
This patch implements the stable privacy address generation for
link-local and autoconf addresses as specified in RFC7217.

  RID = F(Prefix, Net_Iface, Network_ID, DAD_Counter, secret_key)

is the RID (random identifier). As the hash function F we chose one
round of sha1. Prefix will be either the link-local prefix or the
router advertised one. As Net_Iface we use the MAC address of the
device. DAD_Counter and secret_key are implemented as specified.

We don't use Network_ID, as it couples the code too closely to other
subsystems. It is specified as optional in the RFC.

As Net_Iface we only use the MAC address: we simply have no stable
identifier in the kernel we could possibly use: because this code might
run very early, we cannot depend on names, as they might be changed by
user space early on during the boot process.

A new address generation mode is introduced,
IN6_ADDR_GEN_MODE_STABLE_PRIVACY. With iproute2 one can switch back to
none or eui64 address configuration mode although the stable_secret is
already set.

We refuse writes to ipv6/conf/all/stable_secret but only allow
ipv6/conf/default/stable_secret and the interface specific file to be
written to. The default stable_secret is used as the parameter for the
namespace, the interface specific can overwrite the secret, e.g. when
switching a network configuration from one system to another while
inheriting the secret.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 22:12:08 -04:00
Hannes Frederic Sowa 3d1bec9932 ipv6: introduce secret_stable to ipv6_devconf
This patch implements the procfs logic for the stable_address knob:
The secret is formatted as an ipv6 address and will be stored per
interface and per namespace. We track initialized flag and return EIO
errors until the secret is set.

We don't inherit the secret to newly created namespaces.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 22:12:08 -04:00
David S. Miller 40451fd013 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next.
Basically, more incremental updates for br_netfilter from Florian
Westphal, small nf_tables updates (including one fix for rb-tree
locking) and small two-liner to add extra validation for the REJECT6
target.

More specifically, they are:

1) Use the conntrack status flags from br_netfilter to know that DNAT is
   happening. Patch for Florian Westphal.

2) nf_bridge->physoutdev == NULL already indicates that the traffic is
   bridged, so let's get rid of the BRNF_BRIDGED flag. Also from Florian.

3) Another patch to prepare voidization of seq_printf/seq_puts/seq_putc,
   from Joe Perches.

4) Consolidation of nf_tables_newtable() error path.

5) Kill nf_bridge_pad used by br_netfilter from ip_fragment(),
   from Florian Westphal.

6) Access rb-tree root node inside the lock and remove unnecessary
   locking from the get path (we already hold nfnl_lock there), from
   Patrick McHardy.

7) You cannot use a NFT_SET_ELEM_INTERVAL_END when the set doesn't
   support interval, also from Patrick.

8) Enforce IP6T_F_PROTO from ip6t_REJECT to make sure the core is
   actually restricting matches to TCP.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 22:02:46 -04:00
Eric Dumazet 2215089b22 ipv6: tcp: handle ICMP messages on TCP_NEW_SYN_RECV request sockets
tcp_v6_err() can restrict lookups to ehash table, and not to listeners.

Note this patch creates the infrastructure, but this means that ICMP
messages for request sockets are ignored until complete conversion.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:52:26 -04:00
Eric Dumazet b282705336 net: convert syn_wait_lock to a spinlock
This is a low hanging fruit, as we'll get rid of syn_wait_lock eventually.

We hold syn_wait_lock for such small sections, that it makes no sense to use
a read/write lock. A spin lock is simply faster.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:52:26 -04:00
David S. Miller c0e41fa76c Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Fix missing initialization of tuple structure in nfnetlink_cthelper
   to avoid mismatches when looking up to attach userspace helpers to
   flows, from Ian Wilson.

2) Fix potential crash in nft_hash when we hit -EAGAIN in
   nft_hash_walk(), from Herbert Xu.

3) We don't need to indicate the hook information to update the
   basechain default policy in nf_tables.

4) Restore tracing over nfnetlink_log due to recent rework to
   accomodate logging infrastructure into nf_tables.

5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY.

6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and
   REJECT6 from xt over nftables.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-22 16:57:07 -04:00
Pablo Neira Ayuso e35158e401 netfilter: ip6t_REJECT: check for IP6T_F_PROTO
Make sure IP6T_F_PROTO is set to enforce layer 4 protocol matching from
the ip6_tables core.

Suggested-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-22 20:02:46 +01:00
David S. Miller 0fa74a4be4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/emulex/benet/be_main.c
	net/core/sysctl_net_core.c
	net/ipv4/inet_diag.c

The be_main.c conflict resolution was really tricky.  The conflict
hunks generated by GIT were very unhelpful, to say the least.  It
split functions in half and moved them around, when the real actual
conflict only existed solely inside of one function, that being
be_map_pci_bars().

So instead, to resolve this, I checked out be_main.c from the top
of net-next, then I applied the be_main.c changes from 'net' since
the last time I merged.  And this worked beautifully.

The inet_diag.c and sysctl_net_core.c conflicts were simple
overlapping changes, and were easily to resolve.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 18:51:09 -04:00
Marcelo Ricardo Leitner c4a6853d8f ipv6: invert join/leave anycast rtnl/socket locking order
Commit baf606d9c9 ("ipv4,ipv6: grab rtnl before locking the socket")
missed to update two setsockopt options, IPV6_JOIN_ANYCAST and
IPV6_LEAVE_ANYCAST, causing a lock inverstion regarding to the updated ones.

As ipv6_sock_ac_join and ipv6_sock_ac_leave are only called from
do_ipv6_setsockopt, we are good to just move the rtnl lock upper.

Fixes: baf606d9c9 ("ipv4,ipv6: grab rtnl before locking the socket")
Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 13:32:38 -04:00
Steven Barth 73ba57bfae ipv6: fix backtracking for throw routes
for throw routes to trigger evaluation of other policy rules
EAGAIN needs to be propagated up to fib_rules_lookup
similar to how its done for IPv4

A simple testcase for verification is:

ip -6 rule add lookup 33333 priority 33333
ip -6 route add throw 2001:db8::1
ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333
ip route get 2001:db8::1

Signed-off-by: Steven Barth <cyrus@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 12:57:23 -04:00
Sabrina Dubroca 8e199dfd82 ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment
Matt Grant reported frequent crashes in ipv6_select_ident when
udp6_ufo_fragment is called from openvswitch on a skb that doesn't
have a dst_entry set.

ipv6_proxy_select_ident generates the frag_id without using the dst
associated with the skb.  This approach was suggested by Vladislav
Yasevich.

Fixes: 0508c07f5e ("ipv6: Select fragment id during UFO segmentation if not set.")
Cc: Vladislav Yasevich <vyasevic@redhat.com>
Reported-by: Matt Grant <matt@mattgrant.net.nz>
Tested-by: Matt Grant <matt@mattgrant.net.nz>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 12:56:11 -04:00
Eric Dumazet fa76ce7328 inet: get rid of central tcp/dccp listener timer
One of the major issue for TCP is the SYNACK rtx handling,
done by inet_csk_reqsk_queue_prune(), fired by the keepalive
timer of a TCP_LISTEN socket.

This function runs for awful long times, with socket lock held,
meaning that other cpus needing this lock have to spin for hundred of ms.

SYNACK are sent in huge bursts, likely to cause severe drops anyway.

This model was OK 15 years ago when memory was very tight.

We now can afford to have a timer per request sock.

Timer invocations no longer need to lock the listener,
and can be run from all cpus in parallel.

With following patch increasing somaxconn width to 32 bits,
I tested a listener with more than 4 million active request sockets,
and a steady SYNFLOOD of ~200,000 SYN per second.
Host was sending ~830,000 SYNACK per second.

This is ~100 times more what we could achieve before this patch.

Later, we will get rid of the listener hash and use ehash instead.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 12:40:25 -04:00
Eric Dumazet 52452c5425 inet: drop prev pointer handling in request sock
When request sock are put in ehash table, the whole notion
of having a previous request to update dl_next is pointless.

Also, following patch will get rid of big purge timer,
so we want to delete a request sock without holding listener lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 12:40:25 -04:00
Pablo Neira Ayuso 4017a7ee69 netfilter: restore rule tracing via nfnetlink_log
Since fab4085 ("netfilter: log: nf_log_packet() as real unified
interface"), the loginfo structure that is passed to nf_log_packet() is
used to explicitly indicate the logger type you want to use.

This is a problem for people tracing rules through nfnetlink_log since
packets are always routed to the NF_LOG_TYPE logger after the
aforementioned patch.

We can fix this by removing the trace loginfo structures, but that still
changes the log level from 4 to 5 for tracing messages and there may be
someone relying on this outthere. So let's just introduce a new
nf_log_trace() function that restores the former behaviour.

Reported-by: Markus Kötter <koetter@rrzn.uni-hannover.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-19 11:14:48 +01:00
Marcelo Ricardo Leitner 54ff9ef36b ipv4, ipv6: kill ip_mc_{join, leave}_group and ipv6_sock_mc_{join, drop}
in favor of their inner __ ones, which doesn't grab rtnl.

As these functions need to operate on a locked socket, we can't be
grabbing rtnl by then. It's too late and doing so causes reversed
locking.

So this patch:
- move rtnl handling to callers instead while already fixing some
  reversed locking situations, like on vxlan and ipvs code.
- renames __ ones to not have the __ mark:
  __ip_mc_{join,leave}_group -> ip_mc_{join,leave}_group
  __ipv6_sock_mc_{join,drop} -> ipv6_sock_mc_{join,drop}

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:05:09 -04:00
Marcelo Ricardo Leitner baf606d9c9 ipv4,ipv6: grab rtnl before locking the socket
There are some setsockopt operations in ipv4 and ipv6 that are grabbing
rtnl after having grabbed the socket lock. Yet this makes it impossible
to do operations that have to lock the socket when already within a rtnl
protected scope, like ndo dev_open and dev_stop.

We normally take coarse grained locks first but setsockopt inverted that.

So this patch invert the lock logic for these operations and makes
setsockopt grab rtnl if it will be needed prior to grabbing socket lock.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:05:09 -04:00
Eric Dumazet b4d6444ea3 inet: get rid of last __inet_hash_connect() argument
We now always call __inet_hash_nolisten(), no need to pass it
as an argument.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:35 -04:00
Eric Dumazet 77a6a471bc ipv6: get rid of __inet6_hash()
We can now use inet_hash() and __inet_hash() instead of private
functions.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:35 -04:00
Eric Dumazet d1e559d0b1 inet: add IPv6 support to sk_ehashfn()
Intent is to converge IPv4 & IPv6 inet_hash functions to
factorize code.

IPv4 sockets initialize sk_rcv_saddr and sk_v6_daddr
in this patch, thanks to new sk_daddr_set() and sk_rcv_saddr_set()
helpers.

__inet6_hash can now use sk_ehashfn() instead of a private
inet6_sk_ehashfn() and will simply use __inet_hash() in a
following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:34 -04:00
Eric Dumazet 6eada0110c netns: constify net_hash_mix() and various callers
const qualifiers ease code review by making clear
which objects are not written in a function.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:34 -04:00
Eric Dumazet 0470c8ca1d inet: fix request sock refcounting
While testing last patch series, I found req sock refcounting was wrong.

We must set skc_refcnt to 1 for all request socks added in hashes,
but also on request sockets created by FastOpen or syncookies.

It is tricky because we need to defer this initialization so that
future RCU lookups do not try to take a refcount on a not yet
fully initialized request socket.

Also get rid of ireq_refcnt alias.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 13854e5a60 ("inet: add proper refcounting to request sock")
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17 22:02:29 -04:00
Eric Dumazet 9439ce00f2 tcp: rename struct tcp_request_sock listener
The listener field in struct tcp_request_sock is a pointer
back to the listener. We now have req->rsk_listener, so TCP
only needs one boolean and not a full pointer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17 22:01:56 -04:00
Eric Dumazet 407640de21 inet: add sk_listener argument to inet_reqsk_alloc()
listener socket can be used to set net pointer, and will
be later used to hold a reference on listener.

Add a const qualifier to first argument (struct request_sock_ops *),
and factorize all write_pnet(&ireq->ireq_net, sock_net(sk));

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17 22:01:55 -04:00
Nicolas Dichtel 37355565ba ip6_tunnel: fix error code when tunnel exists
After commit 2b0bb01b6e, the kernel returns -ENOBUFS when user tries to add
an existing tunnel with ioctl API:
$ ip -6 tunnel add ip6tnl1 mode ip6ip6 dev eth1
add tunnel "ip6tnl0" failed: No buffer space available

It's confusing, the right error is EEXIST.

This patch also change a bit the code returned:
 - ENOBUFS -> ENOMEM
 - ENOENT -> ENODEV

Fixes: 2b0bb01b6e ("ip6_tunnel: Return an error when adding an existing tunnel.")
CC: Steffen Klassert <steffen.klassert@secunet.com>
Reported-by: Pierre Cheynier <me@pierre-cheynier.net>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17 15:01:18 -04:00
David S. Miller ca00942a81 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2015-03-16

1) Fix the network header offset in _decode_session6
   when multiple IPv6 extension headers are present.
   From Hajime Tazaki.

2) Fix an interfamily tunnel crash. We set outer mode
   protocol too early and may dispatch to the wrong
   address family. Move the setting of the outer mode
   protocol behind the last accessing of the inner mode
   to fix the crash.

3) Most callers of xfrm_lookup() expect that dst_orig
   is released on error. But xfrm_lookup_route() may
   need dst_orig to handle certain error cases. So
   introduce a flag that tells what should be done in
   case of error. From Huaibin Wang.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:16:49 -04:00
Eric Dumazet f7e4eb03f9 inet: ip early demux should avoid request sockets
When a request socket is created, we do not cache ip route
dst entry, like for timewait sockets.

Let's use sk_fullsock() helper.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 15:55:29 -04:00
Eric Dumazet 16f86165bd inet: fill request sock ir_iif for IPv4
Once request socks will be in ehash table, they will need to have
a valid ir_iff field.

This is currently true only for IPv6. This patch extends support
for IPv4 as well.

This means inet_diag_fill_req() can now properly use ir_iif,
which is better for IPv6 link locals anyway, as request sockets
and established sockets will propagate consistent netlink idiag_if.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14 15:05:10 -04:00
Eric Dumazet 3f66b083a5 inet: introduce ireq_family
Before inserting request socks into general hash table,
fill their socket family.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 22:58:13 -04:00
Eric Dumazet d4f06873b6 inet: get_openreq4() & get_openreq6() do not need listener
ireq->ir_num contains local port, use it.

Also, get_openreq4() dumping listen_sk->refcnt makes litle sense.

inet_diag_fill_req() can also use ireq->ir_num

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 22:58:13 -04:00
Eric Dumazet bd337c581b ipv6: add missing ireq_net & ir_cookie initializations
I forgot to update dccp_v6_conn_request() & cookie_v6_check().
They both need to set ireq->ireq_net and ireq->ir_cookie

Lets clear ireq->ir_cookie in inet_reqsk_alloc()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 33cf7c90fe ("net: add real socket cookies")
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 22:58:12 -04:00
Eric W. Biederman 0c5c9fb551 net: Introduce possible_net_t
Having to say
> #ifdef CONFIG_NET_NS
> 	struct net *net;
> #endif

in structures is a little bit wordy and a little bit error prone.

Instead it is possible to say:
> typedef struct {
> #ifdef CONFIG_NET_NS
>       struct net *net;
> #endif
> } possible_net_t;

And then in a header say:

> 	possible_net_t net;

Which is cleaner and easier to use and easier to test, as the
possible_net_t is always there no matter what the compile options.

Further this allows read_pnet and write_pnet to be functions in all
cases which is better at catching typos.

This change adds possible_net_t, updates the definitions of read_pnet
and write_pnet, updates optional struct net * variables that
write_pnet uses on to have the type possible_net_t, and finally fixes
up the b0rked users of read_pnet and write_pnet.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 14:39:40 -04:00
Eric W. Biederman efd7ef1c19 net: Kill hold_net release_net
hold_net and release_net were an idea that turned out to be useless.
The code has been disabled since 2008.  Kill the code it is long past due.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 14:39:40 -04:00
Eric Dumazet c29390c6df xps: must clear sender_cpu before forwarding
John reported that my previous commit added a regression
on his router.

This is because sender_cpu & napi_id share a common location,
so get_xps_queue() can see garbage and perform an out of bound access.

We need to make sure sender_cpu is cleared before doing the transmit,
otherwise any NIC busy poll enabled (skb_mark_napi_id()) can trigger
this bug.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: John <jw@nuclearfallout.net>
Bisected-by: John <jw@nuclearfallout.net>
Fixes: 2bd82484bb ("xps: fix xps for stacked devices")
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:51:18 -04:00
Lubomir Rintel c78ba6d64c ipv6: expose RFC4191 route preference via rtnetlink
This makes it possible to retain the route preference when RAs are handled in
userspace.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:28:09 -04:00
David S. Miller 515fb5c317 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter fixes for net-next

The following batch contains a couple of fixes to address some fallout
from the previous pull request, they are:

1) Address link problems in the bridge code after e5de75b. Fix it by
   using rcu hook to address to avoid ifdef pollution and hard
   dependency between bridge and br_netfilter.

2) Address sparse warnings in the netfilter reject code, patch from
   Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 12:48:47 -04:00
Florian Westphal a03a8dbe20 netfilter: fix sparse warnings in reject handling
make C=1 CF=-D__CHECK_ENDIAN__ shows following:

net/bridge/netfilter/nft_reject_bridge.c:65:50: warning: incorrect type in argument 3 (different base types)
net/bridge/netfilter/nft_reject_bridge.c:65:50:    expected restricted __be16 [usertype] protocol [..]
net/bridge/netfilter/nft_reject_bridge.c:102:37: warning: cast from restricted __be16
net/bridge/netfilter/nft_reject_bridge.c:102:37: warning: incorrect type in argument 1 (different base types) [..]
net/bridge/netfilter/nft_reject_bridge.c:121:50: warning: incorrect type in argument 3 (different base types) [..]
net/bridge/netfilter/nft_reject_bridge.c:168:52: warning: incorrect type in argument 3 (different base types) [..]
net/bridge/netfilter/nft_reject_bridge.c:233:52: warning: incorrect type in argument 3 (different base types) [..]

Caused by two (harmless) errors:
1. htons() instead of ntohs()
2. __be16 for protocol in nf_reject_ipXhdr_put API, use u8 instead.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-10 15:01:32 +01:00
David S. Miller 3cef5c5b0b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cadence/macb.c

Overlapping changes in macb driver, mostly fixes and cleanups
in 'net' overlapping with the integration of at91_ether into
macb in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09 23:38:02 -04:00
Eric W. Biederman ddb3b6033c net: Remove protocol from struct dst_ops
After my change to neigh_hh_init to obtain the protocol from the
neigh_table there are no more users of protocol in struct dst_ops.
Remove the protocol field from dst_ops and all of it's initializers.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09 16:06:10 -04:00
David S. Miller 5428aef811 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree. Basically, improvements for the packet rejection infrastructure,
deprecation of CLUSTERIP, cleanups for nf_tables and some untangling for
br_netfilter. More specifically they are:

1) Send packet to reset flow if checksum is valid, from Florian Westphal.

2) Fix nf_tables reject bridge from the input chain, also from Florian.

3) Deprecate the CLUSTERIP target, the cluster match supersedes it in
   functionality and it's known to have problems.

4) A couple of cleanups for nf_tables rule tracing infrastructure, from
   Patrick McHardy.

5) Another cleanup to place transaction declarations at the bottom of
   nf_tables.h, also from Patrick.

6) Consolidate Kconfig dependencies wrt. NF_TABLES.

7) Limit table names to 32 bytes in nf_tables.

8) mac header copying in bridge netfilter is already required when
   calling ip_fragment(), from Florian Westphal.

9) move nf_bridge_update_protocol() to br_netfilter.c, also from
   Florian.

10) Small refactor in br_netfilter in the transmission path, again from
    Florian.

11) Move br_nf_pre_routing_finish_bridge_slow() to br_netfilter.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09 15:58:21 -04:00
Willem de Bruijn c247f0534c ip: fix error queue empty skb handling
When reading from the error queue, msg_name and msg_control are only
populated for some errors. A new exception for empty timestamp skbs
added a false positive on icmp errors without payload.

`traceroute -M udpconn` only displayed gateways that return payload
with the icmp error: the embedded network headers are pulled before
sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise.

Fix this regression by refining when msg_name and msg_control
branches are taken. The solutions for the two fields are independent.

msg_name only makes sense for errors that configure serr->port and
serr->addr_offset. Test the first instead of skb->len. This also fixes
another issue. saddr could hold the wrong data, as serr->addr_offset
is not initialized  in some code paths, pointing to the start of the
network header. It is only valid when serr->port is set (non-zero).

msg_control support differs between IPv4 and IPv6. IPv4 only honors
requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The
skb->len test can simply be removed, because skb->dev is also tested
and never true for empty skbs. IPv6 honors requests for all errors
aside from local errors and timestamps on empty skbs.

In both cases, make the policy more explicit by moving this logic to
a new function that decides whether to process msg_control and that
optionally prepares the necessary fields in skb->cb[]. After this
change, the IPv4 and IPv6 paths are more similar.

The last case is rxrpc. Here, simply refine to only match timestamps.

Fixes: 49ca0d8bfa ("net-timestamp: no-payload option")

Reported-by: Jan Niehusmann <jan@gondor.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>

----

Changes
  v1->v2
  - fix local origin test inversion in ip6_datagram_support_cmsg
  - make v4 and v6 code paths more similar by introducing analogous
    ipv4_datagram_support_cmsg
  - fix compile bug in rxrpc
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08 23:01:54 -04:00
Pablo Neira Ayuso f04e599e20 netfilter: nf_tables: consolidate Kconfig options
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-06 01:21:15 +01:00
Lorenzo Colitti 9145736d48 net: ping: Return EAFNOSUPPORT when appropriate.
1. For an IPv4 ping socket, ping_check_bind_addr does not check
   the family of the socket address that's passed in. Instead,
   make it behave like inet_bind, which enforces either that the
   address family is AF_INET, or that the family is AF_UNSPEC and
   the address is 0.0.0.0.
2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL
   if the socket family is not AF_INET6. Return EAFNOSUPPORT
   instead, for consistency with inet6_bind.
3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT
   instead of EINVAL if an incorrect socket address structure is
   passed in.
4. Make IPv6 ping sockets be IPv6-only. The code does not support
   IPv4, and it cannot easily be made to support IPv4 because
   the protocol numbers for ICMP and ICMPv6 are different. This
   makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead
   of making the socket unusable.

Among other things, this fixes an oops that can be triggered by:

    int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP);
    struct sockaddr_in6 sin6 = {
        .sin6_family = AF_INET6,
        .sin6_addr = in6addr_any,
    };
    bind(s, (struct sockaddr *) &sin6, sizeof(sin6));

Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 15:46:51 -05:00
Eric W. Biederman 60395a20ff neigh: Factor out ___neigh_lookup_noref
While looking at the mpls code I found myself writing yet another
version of neigh_lookup_noref.  We currently have __ipv4_lookup_noref
and __ipv6_lookup_noref.

So to make my work a little easier and to make it a smidge easier to
verify/maintain the mpls code in the future I stopped and wrote
___neigh_lookup_noref.  Then I rewote __ipv4_lookup_noref and
__ipv6_lookup_noref in terms of this new function.  I tested my new
version by verifying that the same code is generated in
ip_finish_output2 and ip6_finish_output2 where these functions are
inlined.

To get to ___neigh_lookup_noref I added a new neighbour cache table
function key_eq.  So that the static size of the key would be
available.

I also added __neigh_lookup_noref for people who want to to lookup
a neighbour table entry quickly but don't know which neibhgour table
they are going to look up.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 00:23:23 -05:00
David S. Miller 71a83a6db6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/rocker/rocker.c

The rocker commit was two overlapping changes, one to rename
the ->vport member to ->pport, and another making the bitmask
expression use '1ULL' instead of plain '1'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 21:16:48 -05:00
Michal Kubeček acf8dd0a9d udp: only allow UFO for packets from SOCK_DGRAM sockets
If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to
CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
checksum is to be computed on segmentation. However, in this case,
skb->csum_start and skb->csum_offset are never set as raw socket
transmit path bypasses udp_send_skb() where they are usually set. As a
result, driver may access invalid memory when trying to calculate the
checksum and store the result (as observed in virtio_net driver).

Moreover, the very idea of modifying the userspace provided UDP header
is IMHO against raw socket semantics (I wasn't able to find a document
clearly stating this or the opposite, though). And while allowing
CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
too intrusive change just to handle a corner case like this. Therefore
disallowing UFO for packets from SOCK_DGRAM seems to be the best option.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 22:19:29 -05:00
Florian Westphal ee586bbc28 netfilter: reject: don't send icmp error if csum is invalid
tcp resets are never emitted if the packet that triggers the
reject/reset has an invalid checksum.

For icmp error responses there was no such check.
It allows to distinguish icmp response generated via

iptables -I INPUT -p udp --dport 42 -j REJECT

and those emitted by network stack (won't respond if csum is invalid,
REJECT does).

Arguably its possible to avoid this by using conntrack and only
using REJECT with -m conntrack NEW/RELATED.

However, this doesn't work when connection tracking is not in use
or when using nf_conntrack_checksum=0.

Furthermore, sending errors in response to invalid csums doesn't make
much sense so just add similar test as in nf_send_reset.

Validate csum if needed and only send the response if it is ok.

Reference: http://bugzilla.redhat.com/show_bug.cgi?id=1169829
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-03 02:10:35 +01:00
Eric W. Biederman bdf53c5849 neigh: Don't require dst in neigh_hh_init
- Add protocol to neigh_tbl so that dst->ops->protocol is not needed
- Acquire the device from neigh->dev

This results in a neigh_hh_init that will cache the samve values
regardless of the packets flowing through it.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 16:43:41 -05:00
Ying Xue 1b78414047 net: Remove iocb argument from sendmsg and recvmsg
After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 13:06:31 -05:00
Eyal Birger b4772ef879 net: use common macro for assering skb->cb[] available size in protocol families
As part of an effort to move skb->dropcount to skb->cb[] use a common
macro in protocol families using skb->cb[] for ancillary data to
validate available room in skb->cb[].

Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 00:19:30 -05:00
Eric Dumazet 74abc20ced tcp: cleanup static functions
tcp_fastopen_create_child() is static and should not be exported.

tcp4_gso_segment() and tcp6_gso_segment() should be static.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28 16:56:51 -05:00
Madhu Challa 93a714d6b5 multicast: Extend ip address command to enable multicast group join/leave on
Joining multicast group on ethernet level via "ip maddr" command would
not work if we have an Ethernet switch that does igmp snooping since
the switch would not replicate multicast packets on ports that did not
have IGMP reports for the multicast addresses.

Linux vxlan interfaces created via "ip link add vxlan" have the group option
that enables then to do the required join.

By extending ip address command with option "autojoin" we can get similar
functionality for openvswitch vxlan interfaces as well as other tunneling
mechanisms that need to receive multicast traffic. The kernel code is
structured similar to how the vxlan driver does a group join / leave.

example:
ip address add 224.1.1.10/24 dev eth5 autojoin
ip address del 224.1.1.10/24 dev eth5

Signed-off-by: Madhu Challa <challa@noironetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27 16:25:25 -05:00
Madhu Challa 46a4dee074 igmp v6: add __ipv6_sock_mc_join and __ipv6_sock_mc_drop
Based on the igmp v4 changes from Eric Dumazet.
959d10f6bbf6("igmp: add __ip_mc_{join|leave}_group()")

These changes are needed to perform igmp v6 join/leave while
RTNL is held.

Make ipv6_sock_mc_join and ipv6_sock_mc_drop wrappers around
__ipv6_sock_mc_join and  __ipv6_sock_mc_drop to avoid
proliferation of work queues.

Signed-off-by: Madhu Challa <challa@noironetworks.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27 16:25:24 -05:00
Ian Morris 49e64dcda2 ipv6: remove dead debug code from ip6_tunnel.c
The IP6_TNL_TRACE macro is no longer used anywhere in the code so remove definition.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 16:25:25 -05:00
Marcelo Leitner 77751427a1 ipv6: addrconf: validate new MTU before applying it
Currently we don't check if the new MTU is valid or not and this allows
one to configure a smaller than minimum allowed by RFCs or even bigger
than interface own MTU, which is a problem as it may lead to packet
drops.

If you have a daemon like NetworkManager running, this may be exploited
by remote attackers by forging RA packets with an invalid MTU, possibly
leading to a DoS. (NetworkManager currently only validates for values
too small, but not for too big ones.)

The fix is just to make sure the new value is valid. That is, between
IPV6_MIN_MTU and interface's MTU.

Note that similar check is already performed at
ndisc_router_discovery(), for when kernel itself parses the RA.

Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 18:16:12 -05:00
Alex W Slater 29778bec12 ipv6: Replace "#include <asm/uaccess>" with "#include <linux/uaccess>"
Fix checkpatch.pl warning "Use #include <linux/uaccess.h> instead of <asm/uaccess.h>"

Signed-off-by: Alex W Slater <alex.slater.dev@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21 22:05:53 -05:00
Martin KaFai Lau 3b4711757d ipv6: fix ipv6_cow_metrics for non DST_HOST case
ipv6_cow_metrics() currently assumes only DST_HOST routes require
dynamic metrics allocation from inetpeer.  The assumption breaks
when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric.
Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set()
is called after the route is created.

This patch creates the metrics array (by calling dst_cow_metrics_generic) in
ipv6_cow_metrics().

Test:
radvd.conf:
interface qemubr0
{
	AdvLinkMTU 1300;
	AdvCurHopLimit 30;

	prefix fd00:face:face:face::/64
	{
		AdvOnLink on;
		AdvAutonomous on;
		AdvRouterAddr off;
	};
};

Before:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec
fe80::/64 dev eth0  proto kernel  metric 256
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec

After:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec mtu 1300
fe80::/64 dev eth0  proto kernel  metric 256  mtu 1300
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec mtu 1300 hoplimit 30

Fixes: 8e2ec63917 (ipv6: don't use inetpeer to store metrics for routes.)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:26:16 -08:00
Jan Stancek 4762fb9804 ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc
Use spin_lock_bh in ip6_fl_purge() to prevent following potentially
deadlock scenario between ip6_fl_purge() and ip6_fl_gc() timer.

  =================================
  [ INFO: inconsistent lock state ]
  3.19.0 #1 Not tainted
  ---------------------------------
  inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
  swapper/5/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
   (ip6_fl_lock){+.?...}, at: [<ffffffff8171155d>] ip6_fl_gc+0x2d/0x180
  {SOFTIRQ-ON-W} state was registered at:
    [<ffffffff810ee9a0>] __lock_acquire+0x4a0/0x10b0
    [<ffffffff810efd54>] lock_acquire+0xc4/0x2b0
    [<ffffffff81751d2d>] _raw_spin_lock+0x3d/0x80
    [<ffffffff81711798>] ip6_flowlabel_net_exit+0x28/0x110
    [<ffffffff815f9759>] ops_exit_list.isra.1+0x39/0x60
    [<ffffffff815fa320>] cleanup_net+0x100/0x1e0
    [<ffffffff810ad80a>] process_one_work+0x20a/0x830
    [<ffffffff810adf4b>] worker_thread+0x11b/0x460
    [<ffffffff810b42f4>] kthread+0x104/0x120
    [<ffffffff81752bfc>] ret_from_fork+0x7c/0xb0
  irq event stamp: 84640
  hardirqs last  enabled at (84640): [<ffffffff81752080>] _raw_spin_unlock_irq+0x30/0x50
  hardirqs last disabled at (84639): [<ffffffff81751eff>] _raw_spin_lock_irq+0x1f/0x80
  softirqs last  enabled at (84628): [<ffffffff81091ad1>] _local_bh_enable+0x21/0x50
  softirqs last disabled at (84629): [<ffffffff81093b7d>] irq_exit+0x12d/0x150

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(ip6_fl_lock);
    <Interrupt>
      lock(ip6_fl_lock);

   *** DEADLOCK ***

Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-12 07:13:03 -08:00
Tom Herbert 6db93ea13b udp: Set SKB_GSO_UDP_TUNNEL* in UDP GRO path
Properly set GSO types and skb->encapsulation in the UDP tunnel GRO
complete so that packets are properly represented for GSO. This sets
SKB_GSO_UDP_TUNNEL or SKB_GSO_UDP_TUNNEL_CSUM depending on whether
non-zero checksums were received, and sets SKB_GSO_TUNNEL_REMCSUM if
the remote checksum option was processed.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11 15:12:10 -08:00
Vlad Yasevich bf250a1fa7 ipv6: Partial checksum only UDP packets
ip6_append_data is used by other protocols and some of them can't
be partially checksummed.  Only partially checksum UDP protocol.

Fixes: 32dce968dd (ipv6: Allow for partial checksums on non-ufo packets)
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11 14:32:08 -08:00
David S. Miller 2573beec56 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09 14:35:57 -08:00
Vlad Yasevich 8381eacf5c ipv6: Make __ipv6_select_ident static
Make __ipv6_select_ident() static as it isn't used outside
the file.

Fixes: 0508c07f5e (ipv6: Select fragment id during UFO segmentation if not set.)
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09 14:21:03 -08:00
Vlad Yasevich 51f30770e5 ipv6: Fix fragment id assignment on LE arches.
Recent commit:
0508c07f5e
Author: Vlad Yasevich <vyasevich@gmail.com>
Date:   Tue Feb 3 16:36:15 2015 -0500

    ipv6: Select fragment id during UFO segmentation if not set.

Introduced a bug on LE in how ipv6 fragment id is assigned.
This was cought by nightly sparce check:

Resolve the following sparce error:
 net/ipv6/output_core.c:57:38: sparse: incorrect type in assignment
 (different base types)
   net/ipv6/output_core.c:57:38:    expected restricted __be32
[usertype] ip6_frag_id
   net/ipv6/output_core.c:57:38:    got unsigned int [unsigned]
[assigned] [usertype] id

Fixes: 0508c07f5e (ipv6: Select fragment id during UFO segmentation if not set.)
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09 14:21:03 -08:00
Steffen Klassert 044a832a77 xfrm: Fix local error reporting crash with interfamily tunnels
We set the outer mode protocol too early. As a result, the
local error handler might dispatch to the wrong address family
and report the error to a wrong socket type. We fix this by
setting the outer protocol to the skb after we accessed the
inner mode for the last time, right before we do the atcual
encapsulation where we switch finally to the outer mode.

Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Tested-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-02-09 11:14:17 +01:00
Michael Büsch 662f5533c4 rt6_probe_deferred: Do not depend on struct ordering
rt6_probe allocates a struct __rt6_probe_work and schedules a work handler rt6_probe_deferred.
But rt6_probe_deferred kfree's the struct work_struct instead of struct __rt6_probe_work.
This works, because struct work_struct is the first element of struct __rt6_probe_work.

Change it to kfree struct __rt6_probe_work to not implicitly depend on
struct work_struct being the first element.

This does not affect the generated code.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 13:00:43 -08:00
Daniel Borkmann 11b1f8288d ipv6: addrconf: add missing validate_link_af handler
We still need a validate_link_af() handler with an appropriate nla policy,
similarly as we have in IPv4 case, otherwise size validations are not being
done properly in that case.

Fixes: f53adae4ea ("net: ipv6: add tokenized interface identifier support")
Fixes: bc91b0f07a ("ipv6: addrconf: implement address generation modes")
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06 12:51:33 -08:00
Hajime Tazaki cd3bafc73d xfrm6: Fix a offset value for network header in _decode_session6
When a network-layer header has multiple IPv6 extension headers, then offset
for mobility header goes wrong. This regression breaks an xfrm policy lookup
for a particular receive packet. Binding update packets of Mobile IPv6
are all discarded without this fix.

Fixes: de3b7a06df ("xfrm6: Fix transport header offset in _decode_session6.")
Signed-off-by: Hajime Tazaki <tazaki@sfc.wide.ad.jp>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-02-06 07:00:32 +01:00
Erik Kline c58da4c659 net: ipv6: allow explicitly choosing optimistic addresses
RFC 4429 ("Optimistic DAD") states that optimistic addresses
should be treated as deprecated addresses.  From section 2.1:

   Unless noted otherwise, components of the IPv6 protocol stack
   should treat addresses in the Optimistic state equivalently to
   those in the Deprecated state, indicating that the address is
   available for use but should not be used if another suitable
   address is available.

Optimistic addresses are indeed avoided when other addresses are
available (i.e. at source address selection time), but they have
not heretofore been available for things like explicit bind() and
sendmsg() with struct in6_pktinfo, etc.

This change makes optimistic addresses treated more like
deprecated addresses than tentative ones.

Signed-off-by: Erik Kline <ek@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 15:37:41 -08:00
David S. Miller 6e03f896b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/vxlan.c
	drivers/vhost/net.c
	include/linux/if_vlan.h
	net/core/dev.c

The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.

In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.

In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.

In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 14:33:28 -08:00
Eric Dumazet a409caecb2 sit: fix some __be16/u16 mismatches
Fixes following sparse warnings :

net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1509:32:    expected restricted __be16 [usertype] sport
net/ipv6/sit.c:1509:32:    got unsigned short
net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types)
net/ipv6/sit.c:1514:32:    expected restricted __be16 [usertype] dport
net/ipv6/sit.c:1514:32:    got unsigned short
net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1711:38:    expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1711:38:    got restricted __be16 [usertype] sport
net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types)
net/ipv6/sit.c:1713:38:    expected unsigned short [unsigned] [usertype] value
net/ipv6/sit.c:1713:38:    got restricted __be16 [usertype] dport

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 00:43:14 -08:00
Sabrina Dubroca d1e158e2d7 ip6_gre: fix endianness errors in ip6gre_err
info is in network byte order, change it back to host byte order
before use. In particular, the current code sets the MTU of the tunnel
to a wrong (too big) value.

Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 00:33:10 -08:00
David S. Miller f2683b743f Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
More iov_iter work from Al Viro.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04 20:46:55 -08:00
Vlad Yasevich 0508c07f5e ipv6: Select fragment id during UFO segmentation if not set.
If the IPv6 fragment id has not been set and we perform
fragmentation due to UFO, select a new fragment id.
We now consider a fragment id of 0 as unset and if id selection
process returns 0 (after all the pertrubations), we set it to
0x80000000, thus giving us ample space not to create collisions
with the next packet we may have to fragment.

When doing UFO integrity checking, we also select the
fragment id if it has not be set yet.   This is stored into
the skb_shinfo() thus allowing UFO to function correclty.

This patch also removes duplicate fragment id generation code
and moves ipv6_select_ident() into the header as it may be
used during GSO.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 23:06:43 -08:00
Al Viro 21226abb4e net: switch memcpy_fromiovec()/memcpy_fromiovecend() users to copy_from_iter()
That takes care of the majority of ->sendmsg() instances - most of them
via memcpy_to_msg() or assorted getfrag() callbacks.  One place where we
still keep memcpy_fromiovecend() is tipc - there we potentially read the
same data over and over; separate patch, that...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04 01:34:15 -05:00
Al Viro cacdc7d2f9 ip: stash a pointer to msghdr in struct ping_fakehdr
... instead of storing its ->mgs_iter.iov there

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04 01:34:14 -05:00
Al Viro c3c1a7dbe2 ipv6: rawv6_send_hdrinc(): pass msghdr
Switch from passing msg->iov_iter.iov to passing msg itself

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04 01:34:14 -05:00
Vlad Yasevich 32dce968dd ipv6: Allow for partial checksums on non-ufo packets
Currntly, if we are not doing UFO on the packet, all UDP
packets will start with CHECKSUM_NONE and thus perform full
checksum computations in software even if device support
IPv6 checksum offloading.

Let's start start with CHECKSUM_PARTIAL if the device
supports it and we are sending only a single packet at
or below mtu size.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:05 -08:00
Vlad Yasevich 03485f2adc udpv6: Add lockless sendmsg() support
This commit adds the same functionaliy to IPv6 that
commit 903ab86d19
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date:   Tue Mar 1 02:36:48 2011 +0000

    udp: Add lockless transmit path

added to IPv4.

UDP transmit path can now run without a socket lock,
thus allowing multiple threads to send to a single socket
more efficiently.
This is only used when corking/MSG_MORE is not used.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Vlad Yasevich d39d938c82 ipv6: Introduce udpv6_send_skb()
Now that we can individually construct IPv6 skbs to send, add a
udpv6_send_skb() function to populate the udp header and send the
skb.  This allows udp_v6_push_pending_frames() to re-use this
function as well as enables us to add lockless sendmsg() support.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Vlad Yasevich 6422398c2a ipv6: introduce ipv6_make_skb
This commit is very similar to
commit 1c32c5ad6f
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date:   Tue Mar 1 02:36:47 2011 +0000

    inet: Add ip_make_skb and ip_finish_skb

It adds IPv6 version of the helpers ip6_make_skb and ip6_finish_skb.

The job of ip6_make_skb is to collect messages into an ipv6 packet
and poplulate ipv6 eader.  The job of ip6_finish_skb is to transmit
the generated skb.  Together they replicated the job of
ip6_push_pending_frames() while also provide the capability to be
called independently.  This will be needed to add lockless UDP sendmsg
support.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Vlad Yasevich 0bbe84a67b ipv6: Append sending data to arbitrary queue
Add the ability to append data to arbitrary queue.  This
will be needed later to implement lockless UDP sends.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Vlad Yasevich 366e41d977 ipv6: pull cork initialization into its own function.
Pull IPv6 cork initialization into its own function that
can be re-used.  IPv6 specific cork data did not have an
explicit data structure.  This patch creats eone so that
just ipv6 cork data can be as arguemts.  Also, since
IPv6 tries to save the flow label into inet_cork_full
tructure, pass the full cork.

Adjust ip6_cork_release() to take cork data structures.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 19:28:04 -08:00
Willem de Bruijn 49ca0d8bfa net-timestamp: no-payload option
Add timestamping option SOF_TIMESTAMPING_OPT_TSONLY. For transmit
timestamps, this loops timestamps on top of empty packets.

Doing so reduces the pressure on SO_RCVBUF. Payload inspection and
cmsg reception (aside from timestamps) are no longer possible. This
works together with a follow on patch that allows administrators to
only allow tx timestamping if it does not loop payload or metadata.

Signed-off-by: Willem de Bruijn <willemb@google.com>

----

Changes (rfc -> v1)
  - add documentation
  - remove unnecessary skb->len test (thanks to Richard Cochran)
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02 18:46:51 -08:00
Daniel Borkmann 207895fd38 net: mark some potential candidates __read_mostly
They are all either written once or extremly rarely (e.g. from init
code), so we can move them to the .data..read_mostly section.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 17:58:39 -08:00
David S. Miller 95f873f2ff Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/arm/boot/dts/imx6sx-sdb.dts
	net/sched/cls_bpf.c

Two simple sets of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27 16:59:56 -08:00
David S. Miller bf693f7beb Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
ipsec 2015-01-26

Just two small fixes for _decode_session6() where we
might decode to wrong header information in some rare
situations.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27 00:28:38 -08:00
Hannes Frederic Sowa 6e9e16e614 ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
Lubomir Rintel reported that during replacing a route the interface
reference counter isn't correctly decremented.

To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>:
| [root@rhel7-5 lkundrak]# sh -x lal
| + ip link add dev0 type dummy
| + ip link set dev0 up
| + ip link add dev1 type dummy
| + ip link set dev1 up
| + ip addr add 2001:db8:8086::2/64 dev dev0
| + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20
| + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10
| + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20
| + ip link del dev0 type dummy
| Message from syslogd@rhel7-5 at Jan 23 10:54:41 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2
|
| Message from syslogd@rhel7-5 at Jan 23 10:54:51 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2

During replacement of a rt6_info we must walk all parent nodes and check
if the to be replaced rt6_info got propagated. If so, replace it with
an alive one.

Fixes: 4a287eba2d ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag")
Reported-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27 00:22:14 -08:00
Eric Dumazet 1dc7b90f7c ipv6: tcp: fix race in IPV6_2292PKTOPTIONS
IPv6 TCP sockets store in np->pktoptions skbs, and use skb_set_owner_r()
to charge the skb to socket.

It means that destructor must be called while socket is locked.

Therefore, we cannot use skb_get() or atomic_inc(&skb->users)
to protect ourselves : kfree_skb() might race with other users
manipulating sk->sk_forward_alloc

Fix this race by holding socket lock for the duration of
ip6_datagram_recv_ctl()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 00:44:08 -08:00
Martin KaFai Lau b0a1ba5992 ipv6: Fix __ip6_route_redirect
In my last commit (a3c00e4: ipv6: Remove BACKTRACK macro), the changes in
__ip6_route_redirect is incorrect.  The following case is missed:
1. The for loop tries to find a valid gateway rt. If it fails to find
   one, rt will be NULL.
2. When rt is NULL, it is set to the ip6_null_entry.
3. The newly added 'else if', from a3c00e4, will stop the backtrack from
   happening.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25 22:09:51 -08:00
Harout Hedeshian c2943f1453 net: ipv6: Add sysctl entry to disable MTU updates from RA
The kernel forcefully applies MTU values received in router
advertisements provided the new MTU is less than the current. This
behavior is undesirable when the user space is managing the MTU. Instead
a sysctl flag 'accept_ra_mtu' is introduced such that the user space
can control whether or not RA provided MTU updates should be applied. The
default behavior is unchanged; user space must explicitly set this flag
to 0 for RA MTUs to be ignored.

Signed-off-by: Harout Hedeshian <harouth@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25 14:54:41 -08:00
Tom Herbert d998f8efa4 udp: Do not require sock in udp_tunnel_xmit_skb
The UDP tunnel transmit functions udp_tunnel_xmit_skb and
udp_tunnel6_xmit_skb include a socket argument. The socket being
passed to the functions (from VXLAN) is a UDP created for receive
side. The only thing that the socket is used for in the transmit
functions is to get the setting for checksum (enabled or zero).
This patch removes the argument and and adds a nocheck argument
for checksum setting. This eliminates the unnecessary dependency
on a UDP socket for UDP tunnel transmit.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24 23:15:40 -08:00
Nicolas Dichtel 3390e39761 ip6gretap: advertise link netns via netlink
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23 17:51:14 -08:00
Hagen Paul Pfeifer 9d289715eb ipv6: stop sending PTB packets for MTU < 1280
Reduce the attack vector and stop generating IPv6 Fragment Header for
paths with an MTU smaller than the minimum required IPv6 MTU
size (1280 byte) - called atomic fragments.

See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1]
for more information and how this "feature" can be misused.

[1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00

Signed-off-by: Fernando Gont <fgont@si6networks.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 14:52:07 -05:00
Nicolas Dichtel 1728d4fabd tunnels: advertise link netns via netlink
Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 14:32:03 -05:00
David S. Miller 7b46a644a4 netlink: Fix bugs in nlmsg_end() conversions.
Commit 053c095a82 ("netlink: make nlmsg_end() and genlmsg_end()
void") didn't catch all of the cases where callers were breaking out
on the return value being equal to zero, which they no longer should
when zero means success.

Fix all such cases.

Reported-by: Marcel Holtmann <marcel@holtmann.org>
Reported-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18 23:36:08 -05:00
Johannes Berg 053c095a82 netlink: make nlmsg_end() and genlmsg_end() void
Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.

This makes the very common pattern of

  if (genlmsg_end(...) < 0) { ... }

be a whole bunch of dead code. Many places also simply do

  return nlmsg_end(...);

and the caller is expected to deal with it.

This also commonly (at least for me) causes errors, because it is very
common to write

  if (my_function(...))
    /* error condition */

and if my_function() does "return nlmsg_end()" this is of course wrong.

Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.

Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did

-	return nlmsg_end(...);
+	nlmsg_end(...);
+	return 0;

I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.

One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18 01:03:45 -05:00
Willem de Bruijn f812116b17 ip: zero sockaddr returned on error queue
The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That
structure is defined and allocated on the stack as

    struct {
            struct sock_extended_err ee;
            struct sockaddr_in(6)    offender;
    } errhdr;

The second part is only initialized for certain SO_EE_ORIGIN values.
Always initialize it completely.

An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that
would return uninitialized bytes.

Signed-off-by: Willem de Bruijn <willemb@google.com>

----

Also verified that there is no padding between errhdr.ee and
errhdr.offender that could leak additional kernel data.
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 19:41:16 -05:00
David S. Miller 3f3558bb51 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/xen-netfront.c

Minor overlapping changes in xen-netfront.c, mostly to do
with some buffer management changes alongside the split
of stats into TX and RX.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 00:53:17 -05:00