As noted by Michal, the blkg_iostat_set's in the lockless list hold
reference to blkg's to protect against their removal. Those blkg's
hold reference to blkcg. When a cgroup is being destroyed,
cgroup_rstat_flush() is only called at css_release_work_fn() which
is called when the blkcg reference count reaches 0. This circular
dependency will prevent blkcg and some blkgs from being freed after
they are made offline.
It is less a problem if the cgroup to be destroyed also has other
controllers like memory that will call cgroup_rstat_flush() which will
clean up the reference count. If block is the only controller that uses
rstat, these offline blkcg and blkgs may never be freed leaking more
and more memory over time.
To prevent this potential memory leak:
- flush blkcg per-cpu stats list in __blkg_release(), when no new stat
can be added
- add global blkg_stat_lock for covering concurrent parent blkg stat
update
- don't grab bio->bi_blkg reference when adding the stats into blkcg's
per-cpu stat list since all stats are guaranteed to be consumed before
releasing blkg instance, and grabbing blkg reference for stats was the
most fragile part of original patch
Based on Waiman's patch:
https://lore.kernel.org/linux-block/20221215033132.230023-3-longman@redhat.com/
Fixes: 3b8cc62987 ("blk-cgroup: Optimize blkcg_rstat_flush()")
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: mkoutny@suse.com
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230609234249.1412858-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The nr_active counter continues to increase over time which causes the
blk_mq_get_tag to hang until the thread is rescheduled to a different
core despite there are still tags available.
kernel-stack
INFO: task inboundIOReacto:3014879 blocked for more than 2 seconds
Not tainted 6.1.15-amd64 #1 Debian 6.1.15~debian11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:inboundIOReacto state:D stack:0 pid:3014879 ppid:4557 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x351/0xa20
scheduler+0x5d/0xe0
io_schedule+0x42/0x70
blk_mq_get_tag+0x11a/0x2a0
? dequeue_task_stop+0x70/0x70
__blk_mq_alloc_requests+0x191/0x2e0
kprobe output showing RQF_MQ_INFLIGHT bit is not cleared before
__blk_mq_free_request being called.
320 320 kworker/29:1H __blk_mq_free_request rq_flags 0x220c0 in-flight 1
b'__blk_mq_free_request+0x1 [kernel]'
b'bt_iter+0x50 [kernel]'
b'blk_mq_queue_tag_busy_iter+0x318 [kernel]'
b'blk_mq_timeout_work+0x7c [kernel]'
b'process_one_work+0x1c4 [kernel]'
b'worker_thread+0x4d [kernel]'
b'kthread+0xe6 [kernel]'
b'ret_from_fork+0x1f [kernel]'
Signed-off-by: Tian Lan <tian.lan@twosigma.com>
Fixes: 2e315dc07d ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230513221227.497327-1-tilan7663@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The scsi driver function sd_read_block_characteristics() always calls
disk_set_zoned() to a disk zoned model correctly, in case the device
model changed. This is done even for regular disks to set the zoned
model to BLK_ZONED_NONE and free any zone related resources if the drive
previously was zoned.
This behavior significantly impact the time it takes to revalidate disks
on a large system as the call to disk_clear_zone_settings() done from
disk_set_zoned() for the BLK_ZONED_NONE case results in the device
request queued to be frozen, even if there are no zone resources to
free.
Avoid this overhead for non-zoned devices by not calling
disk_clear_zone_settings() in disk_set_zoned() if the device model
was already set to BLK_ZONED_NONE, which is always the case for regular
devices.
Reported by: Brian Bunker <brian@purestorage.com>
Fixes: 508aebb805 ("block: introduce blk_queue_clear_zone_settings()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230529073237.1339862-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the dawn of time bio_check_eod has a check for a non-zero size of
the device. This doesn't really make any sense as we never want to send
I/O to a device that's been set to zero size, or never moved out of that.
I am a bit surprised we haven't caught this for a long time, but the
removal of the extra validation inside of zram caused syzbot to trip
over this issue recently. I've added a Fixes tag for that commit, but
the issue really goes back way before git history.
Fixes: 9fe95babc7 ("zram: remove valid_io_request")
Reported-by: syzbot+b8d61a58b7c7ebd2c8e0@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230524060538.1593686-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit <8af870aa5b847> ("block: enable bio caching use for passthru IO")
introduced bio-cache for passthru IO. In case when nr_vecs are greater
than BIO_INLINE_VECS, bio and bvecs are allocated from mempool (instead
of percpu cache) and REQ_ALLOC_CACHE is cleared. This causes the side
effect of not freeing bio/bvecs into mempool on completion.
This patch lets the passthru IO fallback to allocation using bio_kmalloc
when nr_vecs are greater than BIO_INLINE_VECS. The corresponding bio
is freed during call to blk_mq_map_bio_put during completion.
Cc: stable@vger.kernel.org # 6.1
fixes <8af870aa5b847> ("block: enable bio caching use for passthru IO")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20230523111709.145676-1-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If multiple CPUs are sharing the same hardware queue, it can
cause leak in the active queue counter tracking when __blk_mq_tag_busy()
is executed simultaneously.
Fixes: ee78ec1077 ("blk-mq: blk_mq_tag_busy is no need to return a value")
Signed-off-by: Tian Lan <tian.lan@twosigma.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230522210555.794134-1-tilan7663@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
User should not be able to write block device if it is read-only at
block level (e.g force_ro attribute). This is ensured in the regular
fops write operation (blkdev_write_iter) but not when writing via
user mapping (mmap), allowing user to actually write a read-only
block device via a PROT_WRITE mapping.
Example: This can lead to integrity issue of eMMC boot partition
(e.g mmcblk0boot0) which is read-only by default.
To fix this issue, simply deny shared writable mapping if the block
is readonly.
Note: Block remains writable if switch to read-only is performed
after the initial mapping, but this is expected behavior according
to commit a32e236eb9 ("Partially revert "block: fail op_is_write()
requests to read-only partitions"")'.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230510074223.991297-1-loic.poulain@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=gAYf
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Improve raid5 sequential IO performance on spinning disks, which
fixes a regression since v6.0 (Jan Kara)
- Fix bitmap offset types, which fixes an issue introduced in this
merge window (Jonathan Derrick)
- Cleanup of hweight type used for cgroup writeback (Maxim)
- Fix a regression with the "has_submit_bio" changes across partitions
(Ming)
- Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.
We used to set this flag on queues non blk-mq queues, and hence some
drivers clear it unconditionally. Since all of these have since been
converted to true blk-mq drivers, drop the useless clear as the bit
is not set (Chaitanya)
- Fix the flags being set in a bio for a flush for drbd (Christoph)
- Cleanup and deduplication of the code handling setting block device
capacity (Damien)
- Fix for ublk handling IO timeouts (Ming)
- Fix for a regression in blk-cgroup teardown (Tao)
- NBD documentation and code fixes (Eric)
- Convert blk-integrity to using device_attributes rather than a second
kobject to manage lifetimes (Thomas)
* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
ublk: add timeout handler
drbd: correctly submit flush bio on barrier
mailmap: add mailmap entries for Jens Axboe
block: Skip destroyed blkg when restart in blkg_destroy_all()
writeback: fix call of incorrect macro
md: Fix bitmap offset type in sb writer
md/raid5: Improve performance for sequential IO
docs nbd: userspace NBD now favors github over sourceforge
block nbd: use req.cookie instead of req.handle
uapi nbd: add cookie alias to handle
uapi nbd: improve doc links to userspace spec
blk-integrity: register sysfs attributes on struct device
blk-integrity: convert to struct device_attribute
blk-integrity: use sysfs_emit
block/drivers: remove dead clear of random flag
block: sync part's ->bd_has_submit_bio with disk's
block: Cleanup set_capacity()/bdev_set_nr_sectors()
Kernel hang in blkg_destroy_all() when total blkg greater than
BLKG_DESTROY_BATCH_SIZE, because of not removing destroyed blkg in
blkg_list. So the size of blkg_list is same after destroying a
batch of blkg, and the infinite 'restart' occurs.
Since blkg should stay on the queue list until blkg_free_workfn(),
skip destroyed blkg when restart a new round, which will solve this
kernel hang issue and satisfy the previous will to restart.
Reported-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Fixes: f1c006f1c6 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230428045149.1310073-1-tao1.su@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
The "integrity" kobject only acted as a holder for static sysfs entries.
It also was embedded into struct gendisk without managing it, violating
assumptions of the driver core.
Instead register the sysfs entries directly onto the struct device.
Also drop the now unused member integrity_kobj from struct gendisk.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-3-ceccb4493c46@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An upcoming patch will register the integrity attributes directly with
the struct device kobject.
For this the attributes have to be implemented in terms of
struct device_attribute.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-2-ceccb4493c46@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The correct way to emit data into sysfs is via sysfs_emit(), use it.
Also perform some trivial syntactic cleanups.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-1-ceccb4493c46@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
-----BEGIN PGP SIGNATURE-----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=Jt7p
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core changes and cleanups, some notable fixes and two
performance improvements in directory logging.
The IO path cleanups are removing or refactoring old code, scrub main
loop has been completely rewritten also refactoring old code.
There are some changes to non-btrfs code, mostly trivial, the cgroup
punt bio logic is only moved from generic code.
Performance improvements:
- improve logging changes in a directory during one transaction,
avoid iterating over items and reduce lock contention (fsync time
4x lower)
- when logging directory entries during one transaction, reduce
locking of subvolume trees by checking tree-log instead
(improvement in throughput and latency for concurrent access to a
subvolume)
Notable fixes:
- dev-replace:
- properly honor read mode when requested to avoid reading from
source device
- target device won't be used for eventual read repair, this is
unreliable for NODATASUM files
- when there are unpaired (and unrepairable) metadata during
replace, exit early with error and don't try to finish whole
operation
- scrub ioctl properly rejects unknown flags
- fix global block reserve calculations
- fix partial direct io write when there's a page fault in the
middle, iomap will try to continue with partial request but the
btrfs part did not match that, this can lead to zeros written
instead of data
Core changes:
- io path:
- continued cleanups and refactoring around bio handling
- extent io submit path simplifications and cleanups
- flush write path simplifications and cleanups
- rework logic of passing sync mode of bio, with further cleanups
- rewrite scrub code flow, restructure how the stripes are enumerated
and verified in a more unified way
- allow to set lower threshold for block group reclaim in debug mode
to aid zoned mode testing
- remove obsolete time-based delayed ref throttling logic when
truncating items
- DREW locks are not using percpu variables anymore
- more warning fixes (-Wmaybe-uninitialized)
- u64 division simplifications
- error handling improvements
Non-btrfs code changes:
- push cgroup punt bio logic to btrfs code (there was no other user
of that), the functionality can be now selected separately by
BLK_CGROUP_PUNT_BIO
- crc32c_impl removed after removing last uses in btrfs code
- add btrfs_assertfail() to objtool table"
* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: mark btrfs_assertfail() __noreturn
btrfs: fix uninitialized variable warnings
btrfs: use log root when iterating over index keys when logging directory
btrfs: avoid iterating over all indexes when logging directory
btrfs: dev-replace: error out if we have unrepaired metadata error during
btrfs: remove pointless loop at btrfs_get_next_valid_item()
btrfs: scrub: reject unsupported scrub flags
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
btrfs: remove unused raid56 functions which were dedicated for scrub
btrfs: scrub: remove scrub_bio structure
btrfs: scrub: remove scrub_block and scrub_sector structures
btrfs: scrub: remove the old scrub recheck code
btrfs: scrub: remove the old writeback infrastructure
btrfs: scrub: remove scrub_parity structure
btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
btrfs: scrub: introduce helper to queue a stripe for scrub
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
...
* The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special cases
by Jan Kara.
* Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
* Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
* Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
* Jason Yan has continued to factor out ext4_fill_super() into smaller
functions for improve ease of maintenance and comprehension.
* Josh Triplett has created an uapi header for ext4 userspace API's.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmRHS3IACgkQ8vlZVpUN
gaNN7AgAnFiWfk4UqKpBsUL5iQKJgf2K4tjlNXgPd6ghNns0IdFEyeWSHhr6KLv/
SQeoMMyiWaUcTvZs9DokD8U/9M1ELPUiE9W5c9GxJjM86SXp8BlLYSZTiRoNHzGJ
noQpvikj4qTRviK0rA3q5ICTP2eh1ECHMFJy2wcsZQgwnBelUejQHsTGtOwSvFWF
8wMdfuVtAFDZJjzOxzVKfHP22R5HVRWlAU7P1d97qKjBj4Se3+QchI+zdcIrmU9A
tTmCXj57NpTDyLjS9dIDmLygtTv93lOzOmZS8glw0BFonPcd3ObI4RHVxR+V9xu1
lN13YYgBrK6yfApn9L5XL/31PuLfbg==
=VLBx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"There are a number of major cleanups in ext4 this cycle:
- The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special
cases by Jan Kara.
- Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
- Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
- Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
- Jason Yan has continued to factor out ext4_fill_super() into
smaller functions for improve ease of maintenance and
comprehension.
- Josh Triplett has created an uapi header for ext4 userspace API's"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
ext4: Add a uapi header for ext4 userspace APIs
ext4: remove useless conditional branch code
ext4: remove unneeded check of nr_to_submit
ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
ext4: factor out ext4_block_group_meta_init()
ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
ext4: rename two functions with 'check'
ext4: factor out ext4_flex_groups_free()
ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
ext4: factor out ext4_hash_info_init()
Revert "ext4: Fix warnings when freezing filesystem with journaled data"
ext4: Update comment in mpage_prepare_extent_to_map()
ext4: Simplify handling of journalled data in ext4_bmap()
ext4: Drop special handling of journalled data from ext4_quota_on()
ext4: Drop special handling of journalled data from ext4_evict_inode()
ext4: Fix special handling of journalled data from extent zeroing
ext4: Drop special handling of journalled data from extent shifting operations
ext4: Drop special handling of journalled data from ext4_sync_file()
ext4: Commit transaction before writing back pages in data=journal mode
...
-----BEGIN PGP SIGNATURE-----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=EaE9
-----END PGP SIGNATURE-----
Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux
Pull ITER_UBUF updates from Jens Axboe:
"This turns singe vector imports into ITER_UBUF, rather than
ITER_IOVEC.
The former is more trivial to iterate and advance, and hence a bit
more efficient. From some very unscientific testing, ~60% of all iovec
imports are single vector"
* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
iov_iter: Mark copy_compat_iovec_from_user() noinline
iov_iter: import single vector iovecs as ITER_UBUF
iov_iter: convert import_single_range() to ITER_UBUF
iov_iter: overlay struct iovec and ubuf/len
iov_iter: set nr_segs = 1 for ITER_UBUF
iov_iter: remove iov_iter_iovec()
iov_iter: add iter_iov_addr() and iter_iov_len() helpers
ALSA: pcm: check for user backed iterator, not specific iterator type
IB/qib: check for user backed iterator, not specific iterator type
IB/hfi1: check for user backed iterator, not specific iterator type
iov_iter: add iter_iovec() helper
block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
The code for setting a block device capacity (bd_nr_sectors field of
struct block_device) is duplicated in set_capacity() and
bdev_set_nr_sectors(). Clean this up by making bdev_set_nr_sectors()
a block layer internal function defined in block/bdev.c instead of
having this function statically defined in block/partitions/core.c.
With this change, set_capacity() implementation can be simplified to
only calling bdev_set_nr_sectors().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230424131318.79935-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 23f3e3272e.
blk-mq sched bio merge still needs request to grab queue usage counter,
so we can't simply call blk_mq_attempt_bio_merge() when queue usage
counter isn't held.
Fixes: 23f3e3272e ("block: Merge bio before checking ->cached_rq")
Cc: Xiao Ni <xni@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230420112018.1108058-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Locking range start and locking range length
attributes may be require to satisfy restrictions
exposed by OPAL2 geometry feature reporting.
Geometry reporting feature is described in TCG OPAL SSC,
section 3.1.1.4 (ALIGN, LogicalBlockSize, AlignmentGranularity
and LowestAlignedLBA).
4.3.5.2.1.1 RangeStart Behavior:
[ StartAlignment = (RangeStart modulo AlignmentGranularity) - LowestAlignedLBA ]
When processing a Set method or CreateRow method on the Locking
table for a non-Global Range row, if:
a) the AlignmentRequired (ALIGN above) column in the LockingInfo
table is TRUE;
b) RangeStart is non-zero; and
c) StartAlignment is non-zero, then the method SHALL fail and
return an error status code INVALID_PARAMETER.
4.3.5.2.1.2 RangeLength Behavior:
If RangeStart is zero, then
[ LengthAlignment = (RangeLength modulo AlignmentGranularity) - LowestAlignedLBA ]
If RangeStart is non-zero, then
[ LengthAlignment = (RangeLength modulo AlignmentGranularity) ]
When processing a Set method or CreateRow method on the Locking
table for a non-Global Range row, if:
a) the AlignmentRequired (ALIGN above) column in the LockingInfo
table is TRUE;
b) RangeLength is non-zero; and
c) LengthAlignment is non-zero, then the method SHALL fail and
return an error status code INVALID_PARAMETER
In userspace we stuck to logical block size reported by general
block device (via sysfs or ioctl), but we can not read
'AlignmentGranularity' or 'LowestAlignedLBA' anywhere else and
we need to get those values from sed-opal interface otherwise
we will not be able to report or avoid locking range setup
INVALID_PARAMETER errors above.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230411090931.9193-2-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guard all the code to punt bios to a per-cgroup submission helper by a
new CONFIG_BLK_CGROUP_PUNT_BIO symbol that is selected by btrfs.
This way non-btrfs kernel builds don't need to have this code.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
async_bio_lock is only taken from bio submission and workqueue context,
both are never in bottom halves.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
REQ_CGROUP_PUNT is a bit annoying as it is hard to follow and adds
a branch to the bio submission hot path. To fix this, export
blkcg_punt_bio_submit and let btrfs call it directly. Add a new
REQ_FS_PRIVATE flag for btrfs to indicate to it's own low-level
bio submission code that a punt to the cgroup submission helper
is required.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit b12e5c6c75 accidentally changes blk_kick_flush to do a head
insert into the requeue list, fix this up.
Fixes: b12e5c6c75 ("blk-mq: pass a flags argument to blk_mq_add_to_requeue_list")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230416073553.966161-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a long chain of memory dereferencing just to whether or not
this disk has a special submit_bio helper. As that's not necessarily
the common case, add a bd_has_submit_bio state in the bdev to avoid
traversing this memory dependency chain if we don't need to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_mq_run_hw_queue just contains a WARN_ON_ONCE for calls from
interrupt context and a blk_mq_run_dispatch_ops-protected call to
blk_mq_sched_dispatch_requests. Open code the call to
blk_mq_sched_dispatch_requests in both callers, and move the WARN_ON_ONCE
to blk_mq_run_hw_queue where it can be extended to all !async calls,
while the other call is from workqueue context and thus obviously does
not need the assert.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only blk_mq_run_hw_queue can call __blk_mq_delay_run_hw_queue with
async=false, so move the handling there.
With this __blk_mq_delay_run_hw_queue can be merged into
blk_mq_delay_run_hw_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the in-context dispatch, blk_mq_hctx_stopped is alredy checked in
blk_mq_sched_dispatch_requests under blk_mq_run_dispatch_ops() protection.
For the async dispatch case having a check before scheduling the work
still makes sense to avoid needless workqueue scheduling, so just keep it
for that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_hctx_stopped is already checked in blk_mq_sched_dispatch_requests
under blk_mq_run_dispatch_ops() protection, so remove the duplicate check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_mq_sched_dispatch_requests currently has duplicated logic
for the cases where requests are on the hctx dispatch list or not.
Merge the two with a new need_dispatch variable and remove a few
pointless local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of passing a bool at_head, pass down the full flags from the
blk_mq_insert_request interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the at_head bool with a flags argument that so far only contains
a single BLK_MQ_INSERT_AT_HEAD value. This makes it much easier to grep
for head insertions into the blk-mq dispatch queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_add_to_requeue_list takes a bool parameter to control how to kick
the requeue list at the end of the function. Move the call to
blk_mq_kick_requeue_list to the callers that want it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_request_bypass_insert takes a bool parameter to control how to run
the queue at the end of the function. Move the blk_mq_run_hw_queue call
to the callers that want it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_insert_request takes two bool parameters to control how to run
the queue at the end of the function. Move the blk_mq_run_hw_queue call
to the callers that want it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Due to the wildly different behavior based on the bypass_insert argument,
not a whole lot of code in __blk_mq_try_issue_directly is actually shared
between blk_mq_try_issue_directly and blk_mq_request_issue_directly.
Remove __blk_mq_try_issue_directly and fold the code into the two callers
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a helper from __blk_mq_try_issue_directly in preparation
of folding that function into its two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the RQF_DONTPREP and RQF_SOFTBARRIER in separate branches to make
the code more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While both passthrough and flush requests call directly into
blk_mq_request_bypass_insert, the parameters aren't the same.
Split the handling into two separate conditionals and turn the whole
function into an if/elif/elif/else flow instead of the gotos.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just call blk_mq_add_to_requeue_list directly from the two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove this very small helper and fold it into the only caller.
Note that this moves the trace_block_rq_insert out of ctx->lock, matching
the other calls to this tracepoint.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good point in keeping the __blk_mq_insert_request around
for two function calls and a singler caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_sched_insert_request is the main request insert helper and not
directly I/O scheduler related. Move blk_mq_sched_insert_request to
blk-mq.c, rename it to blk_mq_insert_request and mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_dispatch_plug_list is the only caller of
blk_mq_sched_insert_requests, and it makes sense to just fold it there
as blk_mq_sched_insert_requests isn't specific to I/O schedulers despite
the name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei