The LPID allocator init is changed to:
- use mmu_lpid_bits rather than hard-coding;
- use KVM_MAX_NESTED_GUESTS for nested hypervisors;
- not reserve the top LPID on POWER9 and newer CPUs.
The reserved LPID is made a POWER7/8-specific detail.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123120043.3586018-3-npiggin@gmail.com
This facility is controlled by FSCR only. Reserved bits should not be
set in the HFSCR register (although it's likely harmless as this
position would not be re-used, and the L0 is forgiving here too).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220122105639.3477407-1-npiggin@gmail.com
Because of circular inclusion of asm/hw_breakpoint.h, we
need to move definition of asm/reg.h outside of inst.h
so that asm/hw_breakpoint.h gets it without including
asm/inst.h
Also remove asm/inst.h from asm/uprobes.h as it's not
needed anymore.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4b79f1491118af96b1ac0735e74aeca02ea4c04e.1638208156.git.christophe.leroy@csgroup.eu
We have many functionnalities common to 40x and BOOKE, it leads to
many places with #if defined(CONFIG_BOOKE) || defined(CONFIG_40x).
We are going to add a few more with KUAP for booke/40x, so create
a new symbol which is defined when either BOOKE or 40x is defined.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9a3dbd60924cb25c9f944d3d8205ac5a0d15e229.1634627931.git.christophe.leroy@csgroup.eu
Have the TM softpatch emulation code set up the HFAC interrupt and
return -1 in case an instruction was executed with HFSCR bits clear,
and have the interrupt exit handler fall through to the HFAC handler.
When the L0 is running a nested guest, this ensures the HFAC interrupt
is correctly passed up to the L1.
The "direct guest" exit handler will turn these into PROGILL program
interrupts so functionality in practice will be unchanged. But it's
possible an L1 would want to handle these in a different way.
Also rearrange the FAC interrupt emulation code to match the HFAC format
while here (mainly, adding the FSCR_INTR_CAUSE mask).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-5-npiggin@gmail.com
wrtspr() is a function to write an arbitrary value in a special
register. It is used on 8xx to write to SPRN_NRI, SPRN_EID and
SPRN_EIE. Writing any value to one of those will play with MSR EE
and MSR RI regardless of that value.
r0 is used many places in the generated code and using r0 for
that creates an unnecessary dependency of this instruction with
preceding ones using r0 in a few places in vmlinux.
r2 is most likely the most stable register as it contains the
pointer to 'current'.
Using r2 instead of r0 avoids that unnecessary dependency.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f9968f4b592fefda55227f0f7430ea612cc950.1611299687.git.christophe.leroy@csgroup.eu
Starting with ISA v3.1, LPCR[AIL] no longer controls the interrupt
mode for HV=1 interrupts. Instead, a new LPCR[HAIL] bit is defined
which behaves like AIL=3 for HV interrupts when set.
Set HAIL on bare metal to give us mmu-on interrupts and improve
performance.
This also fixes an scv bug: we don't implement scv real mode (AIL=0)
vectors because they are at an inconvenient location, so we just
disable scv support when AIL can not be set. However powernv assumes
that LPCR[AIL] will enable AIL mode so it enables scv support despite
HV interrupts being AIL=0, which causes scv interrupts to go off into
the weeds.
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210402024124.545826-1-npiggin@gmail.com
Unlike the other MSR_TM_* macros, MSR_TM_ACTIVE does not reference or
use its parameter unless CONFIG_PPC_TRANSACTIONAL_MEM is defined. This
causes an 'unused variable' compile warning unless the variable is also
guarded with CONFIG_PPC_TRANSACTIONAL_MEM.
Reference but do nothing with the argument in the macro to avoid a
potential compile warning.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-5-cmr@codefail.de
In preparation of porting PPC32 to C syscall entry/exit,
rewrite the following helpers as static inline functions and
add support for PPC32 in them:
__hard_irq_enable()
__hard_irq_disable()
__hard_EE_RI_disable()
__hard_RI_enable()
Then use them in PPC32 version of arch_local_irq_disable()
and arch_local_irq_enable() to avoid code duplication.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0e290372a0e7dc2ae657b4a01aec85f8de7fdf77.1612796617.git.christophe.leroy@csgroup.eu
Function names should tell what the function does, not how.
mfsrin() and mtsrin() are read/writing segment registers.
They are called that way because they are using mfsrin and mtsrin
instructions, but it doesn't matter for the caller.
In preparation of following patch, change their name to mfsr() and mtsr()
in order to make it obvious they manipulate segment registers without
messing up with how they do it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f92d99f4349391b77766745900231aa880a0efb5.1612612022.git.christophe.leroy@csgroup.eu
No supported processor implements this mode. Setting the bit in
MSR values can be a bit confusing (and would prevent the bit from
ever being reused). Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201106045340.1935841-1-npiggin@gmail.com
There is no defconfig selecting CONFIG_E200, and no platform.
e200 is an earlier version of booke, a predecessor of e500,
with some particularities like an unified cache instead of both an
instruction cache and a data cache.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/34ebc3ba2c768d97f363bd5f2deea2356e9ae127.1605589460.git.christophe.leroy@csgroup.eu
Use SPRN_SPRG_SCRATCH2 as an alternative scratch register in
the early part of DSI prolog in order to avoid clobbering
SPRN_SPRG_SCRATCH0/1 used by other prologs.
The 603 doesn't like a jump from DataLoadTLBMiss to the 10 nops
that are now in the beginning of DSI exception as a result of
the feature section. To workaround this, add a jump as alternative.
It also avoids fetching 10 nops for nothing.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f9f8df2a2be93568768ef1ac793639f7914cf103.1606285014.git.christophe.leroy@csgroup.eu
On the 603, SDR1 is not used.
In order to free SPRN_SPRG2, use SPRN_SDR1 to store the pgdir
phys addr.
But only some bits of SDR1 can be used (0xffff01ff).
As the pgdir is 4k aligned, rotate it by 4 bits to the left.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7370574b49d8476878ce5480726197993cb76108.1606285014.git.christophe.leroy@csgroup.eu
PowerISA v3.1 introduces new control bit (PMCCEXT) for restricting
access to group B PMU registers in problem state when
MMCR0 PMCC=0b00. In problem state and when MMCR0 PMCC=0b00,
setting the Monitor Mode Control Register bit 54 (MMCR0 PMCCEXT),
will restrict read permission on Group B Performance Monitor
Registers (SIER, SIAR, SDAR and MMCR1). When this bit is set to zero,
group B registers will be readable. In other platforms (like power9),
the older behaviour is retained where group B PMU SPRs are readable.
Patch adds support for MMCR0 PMCCEXT bit in power10 by enabling
this bit during boot and during the PMU event enable/disable callback
functions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1606409684-1589-8-git-send-email-atrajeev@linux.vnet.ibm.com
In order to easily use get_tb() from C VDSO, move timebase
functions into a new header named asm/vdso/timebase.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-3-mpe@ellerman.id.au
On PPC64, we have mftb().
On PPC32, we have mftbl() and an #define mftb() mftbl().
mftb() and mftbl() are equivalent, their purpose is to read the
content of SPRN_TRBL, as returned by 'mftb' simplified instruction.
binutils seems to define 'mftbl' instruction as an equivalent
of 'mftb'.
However in both 32 bits and 64 bits documentation, only 'mftb' is
defined, and when performing a disassembly with objdump, the displayed
instruction is 'mftb'
No need to have two ways to do the same thing with different
names, rename mftbl() to have only mftb().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/94dc68d3d9ef9eb549796d4b938b6ba0305a049b.1601556145.git.christophe.leroy@csgroup.eu
This driver does not restore stop > 3 state, so it limits itself
to states which do not lose full state or TB.
The POWER10 SPRs are sufficiently different from P9 that it seems
easier to split out the P10 code. The POWER10 deep sleep code
(e.g., the BHRB restore) has been taken out, but it can be re-added
when stop > 3 support is added.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Pratik Rajesh Sampat<psampat@linux.ibm.com>
Tested-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Reviewed-by: Pratik Rajesh Sampat<psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819094700.493399-1-npiggin@gmail.com
According to the MPC750 Users Manual, the SITV value in Thermal
Management Register 3 is 13 bits long. The present code calculates the
SITV value as 60 * 500 cycles. This would overflow to give 10 us on
a 500 MHz CPU rather than the intended 60 us. (But according to the
Microprocessor Datasheet, there is also a factor of 266 that has to be
applied to this value on certain parts i.e. speed sort above 266 MHz.)
Always use the maximum cycle count, as recommended by the Datasheet.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au
- Improvements and bug-fixes for secure VM support, giving reduced startup
time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJfH7NMAAoJEJ2a6ncsY3GfkZoH/1be9wpKse2wTke3UcgqGnuX
WkOXMqvTG/1goHIuPKm0QP9O3RU3m2EnXqGJjkg71zVYierzMONhJblfU4XDdk2E
FbD2tjNEGuQGNXp8mrHFuwAB6zRQTQevsxsIPYU7KDZ8wKavSAKtayJNEfAf2inI
YB49Vj8N5djmH3Y+T41XsKx8ut4n1o82MTQsuiHwbtZt1GVO9N7OXW4SZvYbu18v
CUp3GIkiFU+VVQv+9a1a1c0w7DendNGL2mNF18tQohwV+NOFv0wsP4ZOONBE8c70
myo9SAuxpOZfeENxk7Cw323kZ2095e/6IDSUeQ91xp/FYmq6YTXmAvc//MKKaow=
=Lnvu
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next-5.6
PPC KVM update for 5.9
- Improvements and bug-fixes for secure VM support, giving reduced startup
time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
Commit 9908c826d5 ("powerpc/perf: Add Power10 PMU feature to DT CPU
features") defines MMCRA_BHRB_DISABLE as `0x2000000000UL`. Binutils
version less than 2.28 doesn't support UL suffix.
arch/powerpc/kernel/cpu_setup_power.S: Assembler messages:
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')'
arch/powerpc/kernel/cpu_setup_power.S:250: Error: operand out of range (0x0000002000000000 is not between 0xffffffffffff8000 and 0x000000000000ffff)
Fix this by wrapping it with the `_UL` macro.
Fixes: 9908c826d5 ("Add Power10 PMU feature to DT CPU features")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1595996214-5833-1-git-send-email-atrajeev@linux.vnet.ibm.com
Add Power10 feature function to DT CPU features, along with a Power10
specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and
cpu_features. This will enable performance monitoring unit (PMU) for
Power10 in CPU features with "performance-monitor-power10".
For Power ISA v3.1, BHRB disable is controlled via Monitor Mode
Control Register A (MMCRA) bit, namely "BHRB Recording
Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
feature at boot for Power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Move MMCRA_BHRB_DISABLE as noted by jpn, drop CPU setup changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-8-git-send-email-atrajeev@linux.vnet.ibm.com
PowerISA v3.1 includes new performance monitoring unit(PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register 2 (SIER2)
Sampled Instruction Event Register 3 (SIER3)
MMCR3 is added for further sampling related configuration
control. SIER2/SIER3 are added to provide additional
information about the sampled instruction.
Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of
these new SPRs, updates the struct thread_struct to include these new
SPRs, include MMCR3 in struct mmcr_regs. This is needed to support
programming of MMCR3 SPR during event_enable/disable. Patch also adds
the sysfs support for the MMCR3 SPR along with SPRN_ macros for these
new pmu SPRs.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Rename to PPMU_ARCH_31 as noted by jpn]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com
POWER8 and POWER9 have 12-bit LPIDs. Change LPID_RSVD to support up to
(4096 - 2) guests on these processors. POWER7 is kept the same with a
limitation of (1024 - 2), but it might be time to drop KVM support for
POWER7.
Tested with 2048 guests * 4 vCPUs on a witherspoon system with 512G
RAM and a bit of swap.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Adds support for emulating ISAv3.1 guests by adding the appropriate PCR
and FSCR bits.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Matrix multiple assist (MMA) is a new feature added to ISAv3.1 and
POWER10. Support on powernv can be selected via a firmware CPU device
tree feature which enables it via a PCR bit.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-7-alistair@popple.id.au
Newer ISA versions are enabled by clearing all bits in the PCR
associated with previous versions of the ISA. Enable ISA v3.1 support
by updating the PCR mask to include ISA v3.0. This ensures all PCR
bits corresponding to earlier architecture versions get cleared
thereby enabling ISA v3.1 if supported by the hardware.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-3-alistair@popple.id.au
Power10 is introducing second DAWR. Add SPRN_ macros for the same.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-3-ravi.bangoria@linux.ibm.com
Power10 is introducing second DAWR. Use real register names from ISA
for current macros:
s/SPRN_DAWR/SPRN_DAWR0/
s/SPRN_DAWRX/SPRN_DAWRX0/
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-2-ravi.bangoria@linux.ibm.com
Add the BOUNDARY SRR1 bit definition for when the cause of an
alignment exception is a prefixed instruction that crosses a 64-byte
boundary. Add the PREFIXED SRR1 bit definition for exceptions caused
by prefixed instructions.
Bit 35 of SRR1 is called SRR1_ISI_N_OR_G. This name comes from it
being used to indicate that an ISI was due to the access being no-exec
or guarded. ISA v3.1 adds another purpose. It is also set if there is
an access in a cache-inhibited location for prefixed instruction.
Rename from SRR1_ISI_N_OR_G to SRR1_ISI_N_G_OR_CIP.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-23-jniethe5@gmail.com
Prefix instructions have their own FSCR bit which needs to enabled via
a CPU feature. The kernel will save the FSCR for problem state but it
needs to be enabled initially.
If prefixed instructions are made unavailable by the [H]FSCR, attempting
to use them will cause a facility unavailable exception. Add "PREFIX" to
the facility_strings[].
Currently there are no prefixed instructions that are actually emulated
by emulate_instruction() within facility_unavailable_exception().
However, when caused by a prefixed instructions the SRR1 PREFIXED bit is
set. Prepare for dealing with emulated prefixed instructions by checking
for this bit.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200506034050.24806-22-jniethe5@gmail.com
current_stack_frame() doesn't return the stack pointer, but the
caller's stack frame. See commit bfe9a2cfe9 ("powerpc: Reimplement
__get_SP() as a function not a define") and commit
acf620ecf5 ("powerpc: Rename __get_SP() to current_stack_pointer()")
for details.
In some cases this is overkill or incorrect, as it doesn't return the
current value of r1.
So add a current_stack_pointer register global to get the value of r1
directly.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of other patch, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220115141.2707-2-mpe@ellerman.id.au
current_stack_pointer(), which was called __get_SP(), used to just
return the value in r1.
But that caused problems in some cases, so it was turned into a
function in commit bfe9a2cfe9 ("powerpc: Reimplement __get_SP() as a
function not a define").
Because it's a function in a separate compilation unit to all its
callers, it has the effect of causing a stack frame to be created, and
then returns the address of that frame. This is good in some cases
like those described in the above commit, but in other cases it's
overkill, we just need to know what stack page we're on.
On some other arches current_stack_pointer is just a register global
giving the stack pointer, and we'd like to do that too. So rename our
current_stack_pointer() to current_stack_frame() to make that
possible.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200220115141.2707-1-mpe@ellerman.id.au
Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines. The
firmware support is still in development, so the code here won't actually
activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict it to
read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop
into xmon and modify kernel data, such as the lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work
with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management) driver to
make it behave more like other balloon drivers and enable some cleanups of
generic mm code.
- A series of fixes to our hardware breakpoint support to properly handle
unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to:
Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser,
Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M.
Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand,
Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg
Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason
Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M.
Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi
Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel
Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=JHzg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines.
The firmware support is still in development, so the code here
won't actually activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict
it to read-only mode when the kernel is lockdown'ed, otherwise it's
trivial to drop into xmon and modify kernel data, such as the
lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache()
(VDSO) to work with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management)
driver to make it behave more like other balloon drivers and enable
some cleanups of generic mm code.
- A series of fixes to our hardware breakpoint support to properly
handle unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V,
Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart,
Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio
Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana
Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg
Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof
Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes,
Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth,
Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing"
* tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits)
powerpc/fixmap: fix crash with HIGHMEM
x86/efi: remove unused variables
powerpc: Define arch_is_kernel_initmem_freed() for lockdep
powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp
powerpc: Avoid clang warnings around setjmp and longjmp
powerpc: Don't add -mabi= flags when building with Clang
powerpc: Fix Kconfig indentation
powerpc/fixmap: don't clear fixmap area in paging_init()
selftests/powerpc: spectre_v2 test must be built 64-bit
powerpc/powernv: Disable native PCIe port management
powerpc/kexec: Move kexec files into a dedicated subdir.
powerpc/32: Split kexec low level code out of misc_32.S
powerpc/sysdev: drop simple gpio
powerpc/83xx: map IMMR with a BAT.
powerpc/32s: automatically allocate BAT in setbat()
powerpc/ioremap: warn on early use of ioremap()
powerpc: Add support for GENERIC_EARLY_IOREMAP
powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()
powerpc/8xx: use the fixmapped IMMR in cpm_reset()
powerpc/8xx: add __init to cpm1 init functions
...
Most 8xx registers have specific names, so just include
reg_8xx.h all the time in reg.h in order to have them defined
even when CONFIG_PPC_8xx is not selected. This will avoid
the need for #ifdefs in C code.
Guard SPRN_ICTRL in an #ifdef CONFIG_PPC_8xx as this register
has same name but different meaning and different spr number as
another register in the mpc7450.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dd82934ad91aab607d0eb7e626c14e6ac0d654eb.1567068137.git.christophe.leroy@c-s.fr
Currently the reserved bits of the Processor Compatibility
Register (PCR) are cleared as per the Programming Note in Section
1.3.3 of version 3.0B of the Power ISA. This causes all new
architecture features to be made available when running on newer
processors with new architecture features added to the PCR as bits
must be set to disable a given feature.
For example to disable new features added as part of Version 2.07 of
the ISA the corresponding bit in the PCR needs to be set.
As new processor features generally require explicit kernel support
they should be disabled until such support is implemented. Therefore
kernels should set all unknown/reserved bits in the PCR such that any
new architecture features which the kernel does not currently know
about get disabled.
An update is planned to the ISA to clarify that the PCR is an
exception to the Programming Note on reserved bits in Section 1.3.3.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190917004605.22471-2-alistair@popple.id.au
Commit 388cc6e133 ("KVM: PPC: Book3S HV: Support POWER6
compatibility mode on POWER7") introduced new macros defining the PCR
bits. When used from assembly files these definitions lead to build
errors using older versions of binutils that don't support the 'ul'
suffix. This fixes the build errors by updating the definitions to use
the __MASK() macro which selects the appropriate suffix.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190917004605.22471-1-alistair@popple.id.au
Protected Execution Facility (PEF) is an architectural change for
POWER 9 that enables Secure Virtual Machines (SVMs). When enabled,
PEF adds a new higher privileged mode, called Ultravisor mode, to
POWER architecture.
The hardware changes include the following:
* There is a new bit in the MSR that determines whether the current
process is running in secure mode, MSR(S) bit 41. MSR(S)=1, process
is in secure mode, MSR(s)=0 process is in normal mode.
* The MSR(S) bit can only be set by the Ultravisor.
* HRFID cannot be used to set the MSR(S) bit. If the hypervisor needs
to return to a SVM it must use an ultracall. It can determine if
the VM it is returning to is secure.
* The privilege of a process is now determined by three MSR bits,
MSR(S, HV, PR). In each of the tables below the modes are listed
from least privilege to highest privilege. The higher privilege
modes can access all the resources of the lower privilege modes.
**Secure Mode MSR Settings**
+---+---+---+---------------+
| S | HV| PR|Privilege |
+===+===+===+===============+
| 1 | 0 | 1 | Problem |
+---+---+---+---------------+
| 1 | 0 | 0 | Privileged(OS)|
+---+---+---+---------------+
| 1 | 1 | 0 | Ultravisor |
+---+---+---+---------------+
| 1 | 1 | 1 | Reserved |
+---+---+---+---------------+
**Normal Mode MSR Settings**
+---+---+---+---------------+
| S | HV| PR|Privilege |
+===+===+===+===============+
| 0 | 0 | 1 | Problem |
+---+---+---+---------------+
| 0 | 0 | 0 | Privileged(OS)|
+---+---+---+---------------+
| 0 | 1 | 0 | Hypervisor |
+---+---+---+---------------+
| 0 | 1 | 1 | Problem (HV) |
+---+---+---+---------------+
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[ cclaudio: Update the commit message ]
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190820021326.6884-7-bauerman@linux.ibm.com
Reimplement Book3S idle code in C, moving POWER7/8/9 implementation
speific HV idle code to the powernv platform code.
Book3S assembly stubs are kept in common code and used only to save
the stack frame and non-volatile GPRs before executing architected
idle instructions, and restoring the stack and reloading GPRs then
returning to C after waking from idle.
The complex logic dealing with threads and subcores, locking, SPRs,
HMIs, timebase resync, etc., is all done in C which makes it more
maintainable.
This is not a strict translation to C code, there are some
significant differences:
- Idle wakeup no longer uses the ->cpu_restore call to reinit SPRs,
but saves and restores them itself.
- The optimisation where EC=ESL=0 idle modes did not have to save GPRs
or change MSR is restored, because it's now simple to do. ESL=1
sleeps that do not lose GPRs can use this optimization too.
- KVM secondary entry and cede is now more of a call/return style
rather than branchy. nap_state_lost is not required because KVM
always returns via NVGPR restoring path.
- KVM secondary wakeup from offline sequence is moved entirely into
the offline wakeup, which avoids a hwsync in the normal idle wakeup
path.
Performance measured with context switch ping-pong on different
threads or cores, is possibly improved a small amount, 1-3% depending
on stop state and core vs thread test for shallow states. Deep states
it's in the noise compared with other latencies.
KVM improvements:
- Idle sleepers now always return to caller rather than branch out
to KVM first.
- This allows optimisations like very fast return to caller when no
state has been lost.
- KVM no longer requires nap_state_lost because it controls NVGPR
save/restore itself on the way in and out.
- The heavy idle wakeup KVM request check can be moved out of the
normal host idle code and into the not-performance-critical offline
code.
- KVM nap code now returns from where it is called, which makes the
flow a bit easier to follow.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Squash the KVM changes in]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin