Cache related issues with DMA rings and performance issues related to
caching are being caused by not properly setting the "dma-coherent" flag
in the device tree entries. Adding it here to correct the issue.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: fd5e5dd56 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2")
Fixes: dddc3c9d7 ("arm64: dts: NS2: add AMAC ethernet support")
Fixes: e79249143 ("arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver")
Fixes: ac9aae00f ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Fixes: efc877676 ("arm64: dts: Add SDHCI DT node for NS2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
If kernel image extends across alignment boundary, existing
code increases the KASLR offset by size of kernel image. The
offset is masked after resizing. There are cases, where after
masking, we may still have kernel image extending across
boundary. This eventually results in only 2MB block getting
mapped while creating the page tables. This results in data aborts
while accessing unmapped regions during second relocation (with
kaslr offset) in __primary_switch. To fix this problem, round up the
kernel image size, by swapper block size, before adding it for
correction.
For example consider below case, where kernel image still crosses
1GB alignment boundary, after masking the offset, which is fixed
by rounding up kernel image size.
SWAPPER_TABLE_SHIFT = 30
Swapper using section maps with section size 2MB.
CONFIG_PGTABLE_LEVELS = 3
VA_BITS = 39
_text : 0xffffff8008080000
_end : 0xffffff800aa1b000
offset : 0x1f35600000
mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1)
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
offset after existing correction (before mask) = 0x1f37f9b000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
offset (after mask) = 0x1f37e00000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
new offset w/ rounding up = 0x1f38000000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
Fixes: f80fb3a3d5 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Back in commit:
92b0729c34 ("x86/mm, x86/mce: Add memcpy_mcsafe()")
... I made a copy/paste error setting up the exception table entries
and ended up with two for label .L_cache_w3 and none for .L_cache_w2.
This means that if we take a machine check on:
.L_cache_w2: movq 2*8(%rsi), %r10
then we don't have an exception table entry for this instruction
and we can't recover.
Fix: s/3/2/
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 92b0729c34 ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Link: http://lkml.kernel.org/r/1490046030-25862-1-git-send-email-tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The calculation of the global physical address (GPA) on UV4 is
incorrect. The gnode_extra/upper global offset should only be
applied for fixed address space systems (UV1..3).
Tested-by: John Estabrook <john.estabrook@hpe.com>
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: John Estabrook <estabrook@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170321231646.667689538@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix USB host for sama5d2
- Fix cpuidle on sama5
-----BEGIN PGP SIGNATURE-----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=XXBm
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes
Fixes for 4.11:
- Fix USB host for sama5d2
- Fix cpuidle on sama5
* tag 'at91-ab-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91: pm: cpu_idle: switch DDR to power-down mode
Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node"
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of device tree fixes for various boards / SoCs.
-----BEGIN PGP SIGNATURE-----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=fo5j
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Allwinner fixes for 4.11
A bunch of device tree fixes for various boards / SoCs.
* tag 'sunxi-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI
ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings
ARM: sun8i: Fix the mali clock rate
Signed-off-by: Olof Johansson <olof@lixom.net>
- A fix to reboot hang seen on imx6sx-udoo-neo board, by removing
arm-supply and soc-supply and using LDO enabled mode.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYz5T0AAoJEFBXWFqHsHzOiUwH/1S1b6Si8fbG0g11BQm+2N0u
mHf3Z41f+F81xuFFt/6ZX5ICiOXDlAdcga3QXUCNCWfYnFLJyDSoF6Z1JSUkGeEa
kVCmi+WWUOYtyU7QYfaBzPtZqqUurqwBu8WwOO/IW81yKpNMNflATKYreutki2oI
z3BW3WGlOEJXIJeyea3EjTClQLhP0qdEn08StneHUdA+YS9nd6/jreHhta4r7gQs
Z4B2yBap7P4a5glOzCafuIAdpPscKS096ND1k3APsiJPGaNjYtxhig5MGo89LK7e
JNfw1KroAmifGVmrgDVwKI3MFLrvSh74phFXwnIAX5iK2U2wB/fiMQjVKmvY9tw=
=NSw6
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.11:
- A fix to reboot hang seen on imx6sx-udoo-neo board, by removing
arm-supply and soc-supply and using LDO enabled mode.
* tag 'imx-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx-udoo-neo: Fix reboot hang
Signed-off-by: Olof Johansson <olof@lixom.net>
Hook up three pkey syscalls (which we don't implement) and the new statx
syscall, as has been done for arch/arm/.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The digital AIF interfaces has been renamed in the sun8i audio codec
driver so the audio-routing in the device tree must be renamed too.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 3f91a89d42.
Now that we do have the machinery for using the radix MMU under a
hypervisor, the extra check and comment introduced in 3f91a89d42 are
no longer correct. The result is that when booted under a hypervisor
that only allows use of radix, we clear the MMU_FTR_TYPE_RADIX and
then set it again, and print a warning about ignoring the
disable_radix command line option, even though the command line does
not include "disable_radix".
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
kvm mmu is reset once successfully loading CR3 as part of emulating vmentry
in nested_vmx_load_cr3(). We should not reset kvm mmu twice.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
If avic is not enabled, avic_vm_init() does nothing and returns early.
However, avic_vm_destroy() still tries to destroy what hasn't been created.
The only bad consequence of this now is that avic_vm_destroy() uses
svm_vm_data_hash_lock that hasn't been initialized (and is not meant
to be used at all if avic is not enabled).
Return early from avic_vm_destroy() if avic is not enabled.
It has nothing to destroy.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kvm@vger.kernel.org
Cc: syzkaller@googlegroups.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
mm/filemap.c: In function ‘clear_bit_unlock_is_negative_byte’:
mm/filemap.c:933: warning: passing argument 2 of ‘test_bit’ discards qualifiers from pointer target type
Make the bitmask pointed to by the "vaddr" parameter volatile to fix
this, like is done on other architectures.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
We concluded there may be a window where the idle wakeup code could get
to pnv_wakeup_tb_loss() (which clobbers non-volatile GPRs), but the
hardware may set SRR1[46:47] to 01b (no state loss) which would result
in the wakeup code failing to restore non-volatile GPRs.
I was not able to trigger this condition with trivial tests on real
hardware or simulator, but the ISA (at least 2.07) seems to allow for
it, and Gautham says that it can happen if there is an exception pending
when the sleep/winkle instruction is executed.
Fixes: 1706567117 ("powerpc/kvm: make hypervisor state restore a function")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The bl_en_pin GPIO pinmux is configured as "gpio_in", which makes it
conflicts with the real GPIO usage (out), and makes the backlight not
usable.
Drop the GPIO pinmux for it, thus this GPIO can be correctly used.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The CPU port of the BCM53125 is configured with RGMII (no delays) but
this should actually be RGMII with transmit delay (rgmii-txid) because
STMMAC takes care of inserting the transmitter delay. This fixes
occasional packet loss encountered.
Fixes: d7b9eaff5f ("ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board")
Reported-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
- Wire up statx() syscall
- Don't print a warning on memory hotplug when HPT resizing isn't available
Thanks to:
David Gibson, Chandan Rajendra.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TfiW
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
"A couple of minor powerpc fixes for 4.11:
- wire up statx() syscall
- don't print a warning on memory hotplug when HPT resizing isn't
available
Thanks to: David Gibson, Chandan Rajendra"
* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Don't give a warning when HPT resizing isn't available
powerpc: Wire up statx() syscall
Pull parisc fixes from Helge Deller:
- Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
modules with CONFIG_MODVERSIONS.
- Dave Anglin optimized the cache flushing for vmap ranges.
- Arvind Yadav provided a fix for a potential NULL pointer dereference
in the parisc perf code (and some code cleanups).
- I wired up the new statx system call, fixed some compiler warnings
with the access_ok() macro and fixed shutdown code to really halt a
system at shutdown instead of crashing & rebooting.
* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix system shutdown halt
parisc: perf: Fix potential NULL pointer dereference
parisc: Avoid compiler warnings with access_ok()
parisc: Wire up statx system call
parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
parisc: support R_PARISC_SECREL32 relocation in modules
-----BEGIN PGP SIGNATURE-----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=lNoR
-----END PGP SIGNATURE-----
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull OpenRISC fixes from Stafford Horne:
"OpenRISC fixes for build issues that were exposed by kbuild robots
after 4.11 merge. All from allmodconfig builds. This includes:
- bug in the handling of 8-byte get_user() calls
- module build failure due to multile missing symbol exports"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
openrisc: Export symbols needed by modules
openrisc: fix issue handling 8 byte get_user calls
openrisc: xchg: fix `computed is not used` warning
On those parisc machines which don't provide a software power off
function, the system currently kills the init process at the end of a
shutdown and unexpectedly restarts insteads of halting.
Fix it by adding a loop which will not return.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.9+
Pull x86 fixes from Thomas Gleixner:
"An assorted pile of fixes along with some hardware enablement:
- a fix for a KASAN / branch profiling related boot failure
- some more fallout of the PUD rework
- a fix for the Always Running Timer which is not initialized when
the TSC frequency is known at boot time (via MSR/CPUID)
- a resource leak fix for the RDT filesystem
- another unwinder corner case fixup
- removal of the warning for duplicate NMI handlers because there are
legitimate cases where more than one handler can be registered at
the last level
- make a function static - found by sparse
- a set of updates for the Intel MID platform which got delayed due
to merge ordering constraints. It's hardware enablement for a non
mainstream platform, so there is no risk"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mpx: Make unnecessarily global function static
x86/intel_rdt: Put group node in rdtgroup_kn_unlock
x86/unwind: Fix last frame check for aligned function stacks
mm, x86: Fix native_pud_clear build error
x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
x86/platform/intel-mid: Add power button support for Merrifield
x86/platform/intel-mid: Use common power off sequence
x86/platform: Remove warning message for duplicate NMI handlers
x86/tsc: Fix ART for TSC_KNOWN_FREQ
x86/platform/intel-mid: Correct MSI IRQ line for watchdog device
Pull x86 acpi fixes from Thomas Gleixner:
"This update deals with the fallout of the recent work to make
cpuid/node mappings persistent.
It turned out that the boot time ACPI based mapping tripped over ACPI
inconsistencies and caused regressions. It's partially reverted and
the fragile part replaced by an implementation which makes the mapping
persistent when a CPU goes online for the first time"
* 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
acpi/processor: Check for duplicate processor ids at hotplug time
acpi/processor: Implement DEVICE operator for processor enumeration
x86/acpi: Restore the order of CPU IDs
Revert"x86/acpi: Enable MADT APIs to return disabled apicids"
Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"
Pull perf fixes from Thomas Gleixner:
"A set of perf related fixes:
- fix a CR4.PCE propagation issue caused by usage of mm instead of
active_mm and therefore propagated the wrong value.
- perf core fixes, which plug a use-after-free issue and make the
event inheritance on fork more robust.
- a tooling fix for symbol handling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf symbols: Fix symbols__fixup_end heuristic for corner cases
x86/perf: Clarify why x86_pmu_event_mapped() isn't racy
x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
perf/core: Better explain the inherit magic
perf/core: Simplify perf_event_free_task()
perf/core: Fix event inheritance on fork()
perf/core: Fix use-after-free in perf_release()
Pull ARM fix from Russell King:
"Just one change to add the statx syscall this time around"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: wire up statx syscall
Naively, it looks racy, but ->mmap_sem saves it. Add a comment and a
lockdep assertion.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/03a1e629063899168dfc4707f3bb6e581e21f5c6.1489694270.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If one thread mmaps a perf event while another thread in the same mm
is in some context where active_mm != mm (which can happen in the
scheduler, for example), refresh_pce() would write the wrong value
to CR4.PCE. This broke some PAPI tests.
Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 7911d3f7af ("perf/x86: Only allow rdpmc if a perf_event is mapped")
Link: http://lkml.kernel.org/r/0c5b38a76ea50e405f9abe07a13dfaef87c173a1.1489694270.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As of commit 438cc81a41 ("powerpc/pseries: Automatically resize HPT
for memory hot add/remove"), when running on the pseries platform, we
always attempt to use the PAPR extension to resize the hashed page
table (HPT) when we add or remove memory.
This is fine, but when the extension is not available we'll give a
harmless, but scary warning. Instead check if the firmware supports HPT
resizing before populating the mmu_hash_ops.resize_hpt pointer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
drivers core: remove assert_held_device_hotplug()
mm: add private lock to serialize memory hotplug operations
mm: don't warn when vmalloc() fails due to a fatal signal
mm, x86: fix native_pud_clear build error
kasan: add a prototype of task_struct to avoid warning
z3fold: fix spinlock unlocking in page reclaim
We still get a build error in random configurations, after this has been
modified a few times:
In file included from include/linux/mm.h:68:0,
from include/linux/suspend.h:8,
from arch/x86/kernel/asm-offsets.c:12:
arch/x86/include/asm/pgtable.h:66:26: error: redefinition of 'native_pud_clear'
#define pud_clear(pud) native_pud_clear(pud)
My interpretation is that the build error comes from a typo in
__PAGETABLE_PUD_FOLDED, so fix that typo now, and remove the incorrect
#ifdef around the native_pud_clear definition.
Fixes: 3e761a42e1 ("mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()")
Fixes: a00cc7d9dd ("mm, x86: add support for PUD-sized transparent hugepages")
Link: http://lkml.kernel.org/r/20170314121330.182155-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Ackedy-by: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The libgpio code pre-sets the GPIO values for the gpio-reset in the
device tree. This results in the device being reset during bringup.
To prevent this pre-setting, use the "open-source" flag in the device
tree.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: b1aaf88 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file")
Fixes: 10baed1 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file")
Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er")
Fixes: e3227c1 ("ARM: dts: NSP: Add new DT file for bcm958525er")
Fixes: 2f8bc00 ("ARM: dts: NSP: Add new DT file for bcm958622hr")
Fixes: d454c37 ("ARM: dts: NSP: Add new DT file for bcm958623hr")
Fixes: f27eacf ("ARM: dts: NSP: Add new DT file for bcm988312hr")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- Fix arm64 kernel boot warning when DEBUG_VIRTUAL and KASAN are enabled
- Enable KEYS_COMPAT for keyctl compat support
- Use cpus_have_const_cap() for system_uses_ttbr0_pan() (slight
performance improvement)
- Update kerneldoc for cpu_suspend() rename
- Remove the arm64-specific kprobe_exceptions_notify (weak generic
variant defined)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mCcZ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes/cleanups from Catalin Marinas:
"In Will's absence I'm sending the arm64 fixes he queued for 4.11-rc3:
- fix arm64 kernel boot warning when DEBUG_VIRTUAL and KASAN are
enabled
- enable KEYS_COMPAT for keyctl compat support
- use cpus_have_const_cap() for system_uses_ttbr0_pan() (slight
performance improvement)
- update kerneldoc for cpu_suspend() rename
- remove the arm64-specific kprobe_exceptions_notify (weak generic
variant defined)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: Update kerneldoc for cpu_suspend() rename
arm64: use const cap for system_uses_ttbr0_pan()
arm64: support keyctl() system call in 32-bit mode
arm64: kasan: avoid bad virt_to_pfn()
arm64: kprobes: remove kprobe_exceptions_notify
Test runs on a ppc64 BE guest succeeded. linux/samples/statx/test-statx
program was executed on the following file types,
1. Regular file
2. Directory
3. device file
4. symlink
5. Named pipe
The test run also included invoking test-statx with the runtime options
provided in the main() function of test-statx.c
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make the function get_user_bd_entry() static as it is not used outside of
arch/x86/mm/mpx.c
This fixes a sparse warning.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 09b871ffd4 (parisc: Define access_ok() as macro) missed to mark uaddr
as used, which then gives compiler warnings about unused variables.
Fix it by comparing uaddr to uaddr which then gets optimized away by the
compiler.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 09b871ffd4 ("parisc: Define access_ok() as macro")
The previously submitted patch did not resolve the random segmentation
faults observed on the phantom buildd system. There are still
unresolved problems with the Debian 4.8 and 4.9 kernels on C8000.
The attached patch removes the flush of the offset map pages and does a
whole data cache flush for large ranges. No other arch flushes the
offset map in these routines as far as I can tell.
I have not observed any random segmentation faults on rp3440 in two
weeks of testing with 4.10.0 and 4.10.1.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Helge Deller <deller@gmx.de>
The parisc kernel doesn't work with CONFIG_MODVERSIONS since the commit
71810db27c. It can't load modules with the
error: "module unix: Unknown relocation: 41".
The commit changes __kcrctab from 64-bit valus to 32-bit values. The
assembler generates R_PARISC_SECREL32 secrel relocation for them and the
module loader doesn't support this relocation.
This patch adds the R_PARISC_SECREL32 relocation to the module loader.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Pull crypto fixes from Herbert Xu:
- self-test failure of crc32c on powerpc
- regressions of ecb(aes) when used with xts/lrw in s5p-sss
- a number of bugs in the omap RNG driver
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
hwrng: omap - Do not access INTMASK_REG on EIP76
hwrng: omap - use devm_clk_get() instead of of_clk_get()
hwrng: omap - write registers after enabling the clock
crypto: s5p-sss - Fix completing crypto request in IRQ handler
crypto: powerpc - Fix initialisation of crc32c context
Was getting the following error with allmodconfig:
ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined!
This was simply a missing break statement, causing an unwanted fall
through.
Signed-off-by: Stafford Horne <shorne@gmail.com>
When building allmodconfig this warning shows.
fs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
./arch/openrisc/include/asm/cmpxchg.h:81:3: warning: value computed is
not used [-Wunused-value]
((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), sizeof(*(ptr))))
^
Applying the same patch logic that was done to the cmpxchg macro.
Signed-off-by: Stafford Horne <shorne@gmail.com>
The rdtgroup_kn_unlock waits for the last user to release and put its
node. But it's calling kernfs_put on the node which calls the
rdtgroup_kn_unlock, which might not be the group's directory node, but
another group's file node.
This race could be easily reproduced by running 2 instances
of following script:
mount -t resctrl resctrl /sys/fs/resctrl/
pushd /sys/fs/resctrl/
mkdir krava
echo "krava" > krava/schemata
rmdir krava
popd
umount /sys/fs/resctrl
It triggers the slub debug error message with following command
line config: slub_debug=,kernfs_node_cache.
Call kernfs_put on the group's node to fix it.
Fixes: 60cf5e101f ("x86/intel_rdt: Add mkdir to resctrl file system")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Shaohua Li <shli@fb.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1489501253-20248-1-git-send-email-jolsa@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pavel Machek reported the following warning on x86-32:
WARNING: kernel stack frame pointer at f50cdf98 in swapper/2:0 has bad value (null)
The warning is caused by the unwinder not realizing that it reached the
end of the stack, due to an unusual prologue which gcc sometimes
generates for aligned stacks. The prologue is based on a gcc feature
called the Dynamic Realign Argument Pointer (DRAP). It's almost always
enabled for aligned stacks when -maccumulate-outgoing-args isn't set.
This issue is similar to the one fixed by the following commit:
8023e0e2a4 ("x86/unwind: Adjust last frame check for aligned function stacks")
... but that fix was specific to x86-64.
Make the fix more generic to cover x86-32 as well, and also ensure that
the return address referred to by the frame pointer is a copy of the
original return address.
Fixes: acb4608ad1 ("x86/unwind: Create stack frames for saved syscall registers")
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/50d4924db716c264b14f1633037385ec80bf89d2.1489465609.git.jpoimboe@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We still get a build error in random configurations, after this has been
modified a few times:
In file included from include/linux/mm.h:68:0,
from include/linux/suspend.h:8,
from arch/x86/kernel/asm-offsets.c:12:
arch/x86/include/asm/pgtable.h:66:26: error: redefinition of 'native_pud_clear'
#define pud_clear(pud) native_pud_clear(pud)
My interpretation is that the build error comes from a typo in __PAGETABLE_PUD_FOLDED,
so fix that typo now, and remove the incorrect #ifdef around the native_pud_clear
definition.
Fixes: 3e761a42e1 ("mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()")
Fixes: a00cc7d9dd ("mm, x86: add support for PUD-sized transparent hugepages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Garnier <thgarnie@google.com>
Link: http://lkml.kernel.org/r/20170314121330.182155-1-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On some DDR controllers, compatible with the sama5d3 one,
the sequence to enter/exit/re-enter the self-refresh mode adds
more constrains than what is currently written in the at91_idle
driver. An actual access to the DDR chip is needed between exit
and re-enter of this mode which is somehow difficult to implement.
This sequence can completely hang the SoC. It is particularly
experienced on parts which embed a L2 cache if the code run
between IDLE calls fits in it...
Moreover, as the intention is to enter and exit pretty rapidly
from IDLE, the power-down mode is a good candidate.
So now we use power-down instead of self-refresh. As we can
simplify the code for sama5d3 compatible DDR controllers,
we instantiate a new sama5d3_ddr_standby() function.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.1+
Fixes: 017b5522d5 ("ARM: at91: Add new binding for sama5d3-ddramc")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The main item is the addition of the Power9 Machine Check handler. This was
delayed to make sure some details were correct, and is as minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with obscure
toolchain problems, two for the PowerNV IOMMU code (used by VFIO), and one to
fix a crash on 32-bit machines with macio devices due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan, Nicholas
Piggin.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=390M
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull some more powerpc fixes from Michael Ellerman:
"The main item is the addition of the Power9 Machine Check handler.
This was delayed to make sure some details were correct, and is as
minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with
obscure toolchain problems, two for the PowerNV IOMMU code (used by
VFIO), and one to fix a crash on 32-bit machines with macio devices
due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
Nicholas Piggin"
* tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: POWER9 machine check handler
powerpc/64s: allow machine check handler to set severity and initiator
powerpc/64s: fix handling of non-synchronous machine checks
powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
powerpc/powernv/ioda2: Update iommu table base on ownership change
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
powerpc/perf: Handle sdar_mode for marked event in power9
powerpc/perf: Fix perf_get_data_addr() for power9 DD1
powerpc/boot: Fix zImage TOC alignment
The kernel doesn't boot with both PROFILE_ANNOTATED_BRANCHES=y and KASAN=y
options selected. With branch profiling enabled we end up calling
ftrace_likely_update() before kasan_early_init(). ftrace_likely_update() is
built with KASAN instrumentation, so calling it before kasan has been
initialized leads to crash.
Use DISABLE_BRANCH_PROFILING define to make sure that we don't call
ftrace_likely_update() from early code before kasan_early_init().
Fixes: ef7f0d6a6c ("x86_64: add KASan support")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Alexander Potapenko <glider@google.com>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: lkp@01.org
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170313163337.1704-1-aryabinin@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
- Fix smartreflex platform data regression where I accidentally
removed legacy platform data still in use
- Fix hypervisor mode for thumb2 kernel
- Fix misplaced tpic2810 to move it to right bus
- Enable INPUT_MOUSEDEV as a loadable module have mice working
- Fix use of gpio-key,wakeup and use wakeup-source instead as
this accidentally sneaked in during the merge window
- Fix error handling for onenand to properly return error
- Remove legacy gpmc-nand.c that's now dead code, this
also removes dependency to the MTD tree for further driver
changes
- Fix device node reference count errors for omap3 and
related to it also release device nodes after no longer
needed
-----BEGIN PGP SIGNATURE-----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=svZk
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/fixes-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.11-rc cycle:
- Fix smartreflex platform data regression where I accidentally
removed legacy platform data still in use
- Fix hypervisor mode for thumb2 kernel
- Fix misplaced tpic2810 to move it to right bus
- Enable INPUT_MOUSEDEV as a loadable module have mice working
- Fix use of gpio-key,wakeup and use wakeup-source instead as
this accidentally sneaked in during the merge window
- Fix error handling for onenand to properly return error
- Remove legacy gpmc-nand.c that's now dead code, this
also removes dependency to the MTD tree for further driver
changes
- Fix device node reference count errors for omap3 and
related to it also release device nodes after no longer
needed
* tag 'omap-for-v4.11/fixes-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Release device node after it is no longer needed.
ARM: OMAP2+: Fix device node reference counts
ARM: OMAP2+: Remove legacy gpmc-nand.c
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
ARM: dts: am335x-pcm953: Fix legacy wakeup source binding
ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules
ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI
ARM: OMAP5 / DRA7: Fix HYP mode boot for thumb2 build
ARM: OMAP3: Fix smartreflex platform data regression
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Jon fixes the UART output on the Broadcom bcm953012k reference board by
using the proper clock reference instead of hard-coding the baud rate
- Jon also fixes the memory map on the bcm953012k reference board by using
the appropriate physical RAM start address
- Jon finally fixes the interrupt type for the Cortex A9 global and local
timers found in the BCM5301X SoC (Norsthar).
-----BEGIN PGP SIGNATURE-----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=0Qzy
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.11/devicetree-fixes' of http://github.com/Broadcom/stblinux into fixes
This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.11,
please pull the following:
- Jon fixes the UART output on the Broadcom bcm953012k reference board by
using the proper clock reference instead of hard-coding the baud rate
- Jon also fixes the memory map on the bcm953012k reference board by using
the appropriate physical RAM start address
- Jon finally fixes the interrupt type for the Cortex A9 global and local
timers found in the BCM5301X SoC (Norsthar).
* tag 'arm-soc/for-4.11/devicetree-fixes' of http://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: BCM5301X: Fix memory start address
ARM: dts: BCM5301X: Fix UARTs on bcm953012k
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds the AB8500 clocks to the device tree using the new
bindings from the clk subsystem, making audio work again.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Intel Merrifield platform has a Basin Cove PMIC to handle in particular
power button events. Add necessary bits to enable it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170308112422.67533-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Intel Medfield may use common for Intel MID devices power sequence.
Remove unneded custom power off stub.
While here, remove function forward declaration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170308112422.67533-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove the WARNING message associated with multiple NMI handlers as
there are at least two that are legitimate. These are the KGDB and the
UV handlers and both want to be called if the NMI has not been claimed
by any other NMI handler.
Use of the UNKNOWN NMI call chain dramatically lowers the NMI call rate
when high frequency NMI tools are in use, notably the perf tools. It is
required on systems that cannot sustain a high NMI call rate without
adversely affecting the system operation.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Frank Ramsay <frank.ramsay@hpe.com>
Cc: Tony Ernst <tony.ernst@hpe.com>
Link: http://lkml.kernel.org/r/20170307210841.730959611@asylum.americas.sgi.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Subhransu reported that convert_art_to_tsc() isn't working for him.
The ART to TSC relation is only set up for systems which use the refined
TSC calibration. Systems with known TSC frequency (available via CPUID 15)
are not using the refined calibration and therefor the ART to TSC relation
is never established.
Add the setup to the known frequency init path which skips ART
calibration. The init code needs to be duplicated as for systems which use
refined calibration the ART setup must be delayed until calibration has
been done.
The problem has been there since the ART support was introdduced, but only
detected now because Subhransu tested the first time on hardware which has
TSC frequency enumerated via CPUID 15.
Note for stable: The conditional has changed from TSC_RELIABLE to
TSC_KNOWN_FREQUENCY.
[ tglx: Rewrote changelog and identified the proper 'Fixes' commit ]
Fixes: f9677e0f83 ("x86/tsc: Always Running Timer (ART) correlated clocksource")
Reported-by: "Prusty, Subhransu S" <subhransu.s.prusty@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: christopher.s.hall@intel.com
Cc: kevin.b.stanton@intel.com
Cc: john.stultz@linaro.org
Cc: akataria@vmware.com
Link: http://lkml.kernel.org/r/20170313145712.GI3312@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The interrupt line used for the watchdog is 12, according to the official
Intel Edison BSP code.
And indeed after fixing it we start getting an interrupt and thus the
watchdog starts working again:
[ 191.699951] Kernel panic - not syncing: Kernel Watchdog
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 78a3bb9e40 ("x86: intel-mid: add watchdog platform code for Merrifield")
Link: http://lkml.kernel.org/r/20170312150744.45493-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull s390 fixes from Martin Schwidefsky:
- four patches to get the new cputime code in shape for s390
- add the new statx system call
- a few bug fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up statx system call
KVM: s390: Fix guest migration for huge guests resulting in panic
s390/ipl: always use load normal for CCW-type re-IPL
s390/timex: micro optimization for tod_to_ns
s390/cputime: provide archicture specific cputime_to_nsecs
s390/cputime: reset all accounting fields on fork
s390/cputime: remove last traces of cputime_t
s390: fix in-kernel program checks
s390/crypt: fix missing unlock in ctr_paes_crypt on error path
Pull x86 fixes from Thomas Gleixner:
- a fix for the kexec/purgatory regression which was introduced in the
merge window via an innocent sparse fix. We could have reverted that
commit, but on deeper inspection it turned out that the whole
machinery is neither documented nor robust. So a proper cleanup was
done instead
- the fix for the TLB flush issue which was discovered recently
- a simple typo fix for a reboot quirk
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tlb: Fix tlb flushing when lguest clears PGE
kexec, x86/purgatory: Unbreak it and clean it up
x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk
Pull irq fixes from Thomas Gleixner:
- a workaround for a GIC erratum
- a missing stub function for CONFIG_IRQDOMAIN=n
- fixes for a couple of type inconsistencies
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/crossbar: Fix incorrect type of register size
irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065
irqdomain: Add empty irq_domain_check_msi_remap
irqchip/crossbar: Fix incorrect type of local variables
Fengguang reported random corruptions from various locations on x86-32
after commits d2852a2240 ("arch: add ARCH_HAS_SET_MEMORY config") and
9d876e79df ("bpf: fix unlocking of jited image when module ronx not set")
that uses the former. While x86-32 doesn't have a JIT like x86_64, the
bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to
ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module
support built in and therefore never had the DEBUG_SET_MODULE_RONX setting
enabled.
After investigating the crashes further, it turned out that using
set_memory_ro() and set_memory_rw() didn't have the desired effect, for
example, setting the pages as read-only on x86-32 would still let
probe_kernel_write() succeed without error. This behavior would manifest
itself in situations where the vmalloc'ed buffer was accessed prior to
set_memory_*() such as in case of bpf_prog_alloc(). In cases where it
wasn't, the page attribute changes seemed to have taken effect, leading to
the conclusion that a TLB invalidate didn't happen. Moreover, it turned out
that this issue reproduced with qemu in "-cpu kvm64" mode, but not for
"-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger
a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(),
though.
There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends
on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush
(depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in
my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu
kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually
worked fine, and further investigating the cr4 one turned out that
X86_CR4_PGE bit was not set in cr4 register, meaning the
__native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same
value instead of clearing X86_CR4_PGE in the first write to trigger the
flush.
It turned out that X86_CR4_PGE was cleared from cr4 during init from
lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also
cleared from there due to concerns of using PGE in guest kernel that can
lead to hard to trace bugs (see bff672e630 ("lguest: documentation V:
Host") in init()). The CPU feature bits are cleared in dynamic
boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses
static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB
flushing to use, meaning they still used the old setting of the host
kernel.
Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate
to static_cpu_has() checks is too late at this point as sections have been
patched already, so for now, it seems reasonable to switch back to
boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf9599
("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via
cr3 as originally intended, properly makes the new page attributes visible
and thus fixes the crashes seen by Fengguang.
Fixes: c109bf9599 ("x86/cpufeature: Remove cpu_has_pge")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: bp@suse.de
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: lkp@01.org
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com
Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ARM updates from Marc Zyngier:
"vgic updates:
- Honour disabling the ITS
- Don't deadlock when deactivating own interrupts via MMIO
- Correctly expose the lact of IRQ/FIQ bypass on GICv3
I/O virtualization:
- Make KVM_CAP_NR_MEMSLOTS big enough for large guests with
many PCIe devices
General bug fixes:
- Gracefully handle exception generated with syndroms that
the host doesn't understand
- Properly invalidate TLBs on VHE systems"
x86:
- improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU reset
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJYxENfAAoJEED/6hsPKofoEEkIAIWglnOGOHqf4pPv9OThKzKm
5CGINdPVEkJ56QNaYrINiQRHAzIUg8dsrhsisYmEdYGv3Mxf5WO0OebfzTrniNm4
GXIM8OuYD04MSnIomfGGBAwFZ6ptgdeD+PVkSFYHArkvWYfPm54ghjVj3AXmkicf
tRiIsPSiL/QT0vha5LBGfwsWOYavmZRfQBNA5yYUIHgO0Mp7LI24AeZOQiSM2ngx
Gl5xfzk0bayhZSBr+r/fvxqbEd0udiY7klGEvt3hrPT+JzzpoamEgCCZ6eLFZbGM
eABeQUzm7StD4Ib3WHkVU81ysOWndL0TK94BBBLIn1j+ht9FLi9iGkmTYspk9po=
=/phS
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM updates from Marc Zyngier:
- vgic updates:
- Honour disabling the ITS
- Don't deadlock when deactivating own interrupts via MMIO
- Correctly expose the lact of IRQ/FIQ bypass on GICv3
- I/O virtualization:
- Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many
PCIe devices
- General bug fixes:
- Gracefully handle exception generated with syndroms that the host
doesn't understand
- Properly invalidate TLBs on VHE systems
x86:
- improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU
reset
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: do not warn when MSR bitmap address is not backed
KVM: arm64: Increase number of user memslots to 512
KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused
KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64
KVM: Add documentation for KVM_CAP_NR_MEMSLOTS
KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled
arm64: KVM: Survive unknown traps from guests
arm: KVM: Survive unknown traps from guests
KVM: arm/arm64: Let vcpu thread modify its own active state
KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset
kvm: nVMX: VMCLEAR should not cause the vCPU to shut down
KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass
arm64: KVM: VHE: Clear HCR_TGE when invalidating guest TLBs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=khtX
-----END PGP SIGNATURE-----
Merge tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull extable.h fix from Paul Gortmaker:
"Fixup for arch/score after extable.h introduction.
It seems that Guenter is the only one on the planet doing builds for
arch/score -- we don't have compile coverage for it in linux-next or
in the kbuild-bot either. Guenter couldn't even recall where he got
his toolchain, but was kind enough to share it with me so I could
validate this change and also add arch/score to my build coverage.
I sat on this a bit in case there was any other fallout in other arch
dirs, but since this still seems to be the only one, I might as well
send it on its way"
* tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
score: Fix implicit includes now failing build after extable change
After changing from module.h to extable.h, score builds fail with:
arch/score/kernel/traps.c: In function 'do_ri':
arch/score/kernel/traps.c:248:4: error: implicit declaration of function 'user_disable_single_step'
arch/score/mm/extable.c: In function 'fixup_exception':
arch/score/mm/extable.c:32:38: error: dereferencing pointer to incomplete type
arch/score/mm/extable.c:34:24: error: dereferencing pointer to incomplete type
because extable.h doesn't drag in the same amount of headers as the
module.h did. Add in the headers which were implicitly expected.
Fixes: 90858794c9 ("module.h: remove extable.h include now users have migrated")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[PG: tweak commit log; refresh for sched header refactoring.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The following commits:
f7c28833c2 ("x86/acpi: Enable acpi to register all possible cpus at
boot time") and 8f54969dc8 ("x86/acpi: Introduce persistent storage
for cpuid <-> apicid mapping")
... registered all the possible CPUs at boot time via ACPI tables to
make the mapping of cpuid <-> apicid fixed. Both enabled and disabled
CPUs could have a logical CPU ID after boot time.
But, ACPI tables are unreliable. the number amd order of Local APIC
entries which depends on the firmware is often inconsistent with the
physical devices. Even if they are consistent, The disabled CPUs which
take up some logical CPU IDs will also make the order discontinuous.
Revert the part of disabled CPUs registration, keep the allocation
logic of logical CPU IDs and also keep some code location changes.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: guzheng1@huawei.com
Cc: izumi.taku@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1488528147-2279-4-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Revert: dc6db24d24 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting")
The mapping of "cpuid <-> nodeid" is established at boot time via ACPI
tables to keep associations of workqueues and other node related items
consistent across cpu hotplug.
But, ACPI tables are unreliable and failures with that boot time mapping
have been reported on machines where the ACPI table and the physical
information which is retrieved at actual hotplug is inconsistent.
Revert the mapping implementation so it can be replaced with a less error
prone approach.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: guzheng1@huawei.com
Cc: izumi.taku@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The purgatory code defines global variables which are referenced via a
symbol lookup in the kexec code (core and arch).
A recent commit addressing sparse warnings made these static and thereby
broke kexec_file.
Why did this happen? Simply because the whole machinery is undocumented and
lacks any form of forward declarations. The variable names are unspecific
and lack a prefix, so adding forward declarations creates shadow variables
in the core code. Aside of that the code relies on magic constants and
duplicate struct definitions with no way to ensure that these things stay
in sync. The section placement of the purgatory variables happened by
chance and not by design.
Unbreak kexec and cleanup the mess:
- Add proper forward declarations and document the usage
- Use common struct definition
- Use the proper common defines instead of magic constants
- Add a purgatory_ prefix to have a proper name space
- Use ARRAY_SIZE() instead of a homebrewn reimplementation
- Add proper sections to the purgatory variables [ From Mike ]
Fixes: 72042a8c7b ("x86/purgatory: Make functions and variables static")
Reported-by: Mike Galbraith <<efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Commit af391b15f7 ("arm64: kernel: rename __cpu_suspend to keep it
aligned with arm") renamed cpu_suspend() to arm_cpuidle_suspend(), but
forgot to update the kerneldoc header.
Fixes: af391b15f7 ("arm64: kernel: rename __cpu_suspend to keep it aligned with arm")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since commit 4b65a5db36 ("arm64: Introduce
uaccess_{disable,enable} functionality based on TTBR0_EL1"),
system_uses_ttbr0_pan() has used cpus_have_cap() to determine whether
PAN is present.
Since commit a4023f6827 ("arm64: Add hypervisor safe helper for
checking constant capabilities"), which was introduced around the same
time, cpus_have_cap() doesn't try to use a static key, and must always
perform a load, test, and consitional branch (likely a tbnz for the
latter two).
Elsewhere, we moved to using cpus_have_const_cap(), which can use a
static key (i.e. a non-conditional branch), which is patched at runtime
when the feature is detected.
This patch makes system_uses_ttbr0_pan() use cpus_have_const_cap(). The
static key is likely a win for hot-paths like the uacccess primitives,
and this makes our usage consistent regardless.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As is the case for a number of other architectures that have a 32-bit
compat mode, enable KEYS_COMPAT if both COMPAT and KEYS are enabled.
This allows AArch32 programs to use the keyctl() system call when
running on an AArch64 kernel.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Booting a v4.11-rc1 kernel with DEBUG_VIRTUAL and KASAN enabled produces
the following splat (trimmed for brevity):
[ 0.000000] virt_to_phys used for non-linear address: ffff200008080000 (0xffff200008080000)
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:14 __virt_to_phys+0x48/0x70
[ 0.000000] PC is at __virt_to_phys+0x48/0x70
[ 0.000000] LR is at __virt_to_phys+0x48/0x70
[ 0.000000] Call trace:
[ 0.000000] [<ffff2000080b1ac0>] __virt_to_phys+0x48/0x70
[ 0.000000] [<ffff20000a03b86c>] kasan_init+0x1c0/0x498
[ 0.000000] [<ffff20000a034018>] setup_arch+0x2fc/0x948
[ 0.000000] [<ffff20000a030c68>] start_kernel+0xb8/0x570
[ 0.000000] [<ffff20000a0301e8>] __primary_switched+0x6c/0x74
This is because we use virt_to_pfn() on a kernel image address when
trying to figure out its nid, so that we can allocate its shadow from
the same node.
As with other recent changes, this patch uses lm_alias() to solve this.
We could instead use NUMA_NO_NODE, as x86 does for all shadow
allocations, though we'll likely want the "real" memory shadow to be
backed from its corresponding nid anyway, so we may as well be
consistent and find the nid for the image shadow.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit fc62d0207a ("kprobes: Introduce weak variant of
kprobe_exceptions_notify()") introduces a generic empty version of the
function for architectures that don't need special handling, like arm64.
As such, remove the arch/arm64/ specific handler.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Merge 5-level page table prep from Kirill Shutemov:
"Here's relatively low-risk part of 5-level paging patchset. Merging it
now will make x86 5-level paging enabling in v4.12 easier.
The first patch is actually x86-specific: detect 5-level paging
support. It boils down to single define.
The rest of patchset converts Linux MMU abstraction from 4- to 5-level
paging.
Enabling of new abstraction in most cases requires adding single line
of code in arch-specific code. The rest is taken care by asm-generic/.
Changes to mm/ code are mostly mechanical: add support for new page
table level -- p4d_t -- where we deal with pud_t now.
v2:
- fix build on microblaze (Michal);
- comment for __ARCH_HAS_5LEVEL_HACK in kasan_populate_zero_shadow();
- acks from Michal"
* emailed patches from Kirill A Shutemov <kirill.shutemov@linux.intel.com>:
mm: introduce __p4d_alloc()
mm: convert generic code to 5-level paging
asm-generic: introduce <asm-generic/pgtable-nop4d.h>
arch, mm: convert all architectures to use 5level-fixup.h
asm-generic: introduce __ARCH_USE_5LEVEL_HACK
asm-generic: introduce 5level-fixup.h
x86/cpufeature: Add 5-level paging detection
Merge fixes from Andrew Morton:
"26 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
userfaultfd: remove wrong comment from userfaultfd_ctx_get()
fat: fix using uninitialized fields of fat_inode/fsinfo_inode
sh: cayman: IDE support fix
kasan: fix races in quarantine_remove_cache()
kasan: resched in quarantine_remove_cache()
mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()
thp: fix another corner case of munlock() vs. THPs
rmap: fix NULL-pointer dereference on THP munlocking
mm/memblock.c: fix memblock_next_valid_pfn()
userfaultfd: selftest: vm: allow to build in vm/ directory
userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED
userfaultfd: non-cooperative: fix fork fctx->new memleak
mm/cgroup: avoid panic when init with low memory
drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h
mm/vmstats: add thp_split_pud event for clarity
include/linux/fs.h: fix unsigned enum warning with gcc-4.2
userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete
userfaultfd: non-cooperative: robustness check
userfaultfd: non-cooperative: rollback userfaultfd_exit
x86, mm: unify exit paths in gup_pte_range()
...
The reboot quirk for ASUS EeeBook X205TA contains a typo in
DMI_PRODUCT_NAME, improperly referring to X205TAW instead of
X205TA, which prevents the quirk from being triggered. The
model X205TAW already has a reboot quirk of its own.
This fix simply removes the inappropriate final letter W.
Fixes: 90b28ded88 ("x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk")
Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Link: http://lkml.kernel.org/r/1489064417-7445-1-git-send-email-matjaz.hegedic@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add POWER9 machine check handler. There are several new types of errors
added, so logging messages for those are also added.
This doesn't attempt to reuse any of the P7/8 defines or functions,
because that becomes too complex. The better option in future is to use
a table driven approach.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently severity and initiator are always set to MCE_SEV_ERROR_SYNC and
MCE_INITIATOR_CPU in the core mce code. Allow them to be set by the
machine specific mce handlers.
No functional change for existing handlers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A synchronous machine check is an exception raised by the attempt to
execute the current instruction. If the error can't be corrected, it
can make sense to SIGBUS the currently running process.
In other cases, the error condition is not related to the current
instruction, so killing the current process is not the right thing to
do.
Today, all machine checks are MCE_SEV_ERROR_SYNC, so this has no
practical change. It will be used to handle POWER9 asynchronous
machine checks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove incorrect CONFIG_IDE ifdef (CONFIG_IDE config option is for
internal drivers/ide/ use) and make IDE hardware interface always
initialized (not only when IDE subsystem is built-in).
This patch allows Cayman board to work with modular IDE subsystem
support and removes the requirement of having the whole core IDE
subsystem built-in when using libata PATA support.
Link: http://lkml.kernel.org/r/1990884.yFoE6lSB9G@amdc3058
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All exit paths from gup_pte_range() require pte_unmap() of the original
pte page before returning. Refactor the code to have a single exit
point to do the unmap.
This mirrors the flow of the generic gup_pte_range() in mm/gup.c.
Link: http://lkml.kernel.org/r/148804251828.36605.14910389618497006945.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gup_pte_range() fails to check pte_allows_gup() before translating a DAX
pte entry, pte_devmap(), to a page. This allows writes to read-only
mappings, and bypasses the DAX cacheline dirty tracking due to missed
'mkwrite' faults. The gup_huge_pmd() path and the gup_huge_pud() path
correctly check pte_allows_gup() before checking for _devmap() entries.
Fixes: 3565fce3a6 ("mm, x86: get_user_pages() for dax mappings")
Link: http://lkml.kernel.org/r/148804251312.36605.12665024794196605053.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Xiong Zhou <xzhou@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We use pte_write() to check whethwer the pte entry is writable. This is
mostly used to later mark the pte read only if it is writable. The other
use of pte_write() is to check whether the pte_entry is writable so that
hardware page table entry can be marked accordingly. This is used in kvm
where we look at qemu page table entry and update hardware hash page table
for the guest with correct write enable bit.
With the above, for the first usage we should also check the savedwrite
bit so that we can correctly clear the savedwite bit. For the later, we
add a new variant __pte_write().
With this we can revert write_protect_page part of 595cd8f256 ("mm/ksm:
handle protnone saved writes when making page write protect"). But I left
it as it is as an example code for savedwrite check.
Fixes: c137a2757b ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write")
Link: http://lkml.kernel.org/r/1488203787-17849-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to mark pages of parent process read only on fork. Numa fault
pte needs a protnone ptes variant with saved write flag set. On fork we
need to make sure we remove the saved write bit. Instead of adding the
protnone check in the caller update ptep_set_wrprotect variants to clear
savedwrite bit.
Without this we see random segfaults in application on fork.
Fixes: c137a2757b ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write")
Link: http://lkml.kernel.org/r/1488203787-17849-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
disble||disable
disbled||disabled
I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched. The macro is not referenced at all, but this commit is
touching only comment blocks just in case.
Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"Sending this a bit sooner than I otherwise would have, as a fix in the
merge window had some unfortunate issues and side effects for some
folks.
This contains:
- Fixes from Jan for the bdi registration/unregistration. These have
been tested by the various parties reporting issues, and should be
solid at this point.
- Also from Jan, fix for axonram gendisk registration.
- A stable fix for zram from Johannes.
- A small series from Ming, fixing up some long standing issues with
blk-mq hardware queue kobject initialization and registration.
- A fix for sed opal from Jon, fixing a nonsensical range check and
some set-but-not-used variables.
- A fix from Neil for a long standing deadlock issue for stacking
device drivers. With this in place, dm/md don't have to work around
the issue anymore, and can be properly fixed up"
* 'for-linus' of git://git.kernel.dk/linux-block:
axonram: Fix gendisk handling
blk: improve order of bio handling in generic_make_request()
Revert "scsi, block: fix duplicate bdi name registration crashes"
block: Make del_gendisk() safer for disks without queues
bdi: Fix use-after-free in wb_congested_put()
block: Allow bdi re-registration
block/sed: Fix opal user range check and unused variables
zram: set physical queue limits to avoid array out of bounds accesses
blk-mq: free hctx->cpumask in release handler of hctx's kobject
blk-mq: make lifetime consistent between hctx and its kobject
blk-mq: make lifetime consitent between q/ctx and its kobject
blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJYwPOdAAoJELDendYovxMvaREH/jWjZt38HQFyWYmpGN/jTl5e
fl2kK8PcYR50WDVMROG50MoWeDWj4OiCHkQTln/BIckBfi895qNE+S27Z6ZvPBcY
Xqx+lbcKej1KU5O11Kmmuz7Jz/h3pyP09lY7vG50pxLMBVJy8L2P3Oj66fB4MbY0
u5DQtPSwRDlf86gNisQuRHDYIF+LZ+ZQD5SL0hRz5UStnxojbX0oxP/ijz/tyshP
Qk5PZXWLOTcWn8mvKJu9wqfNur9FLT+FE8dYzAqa8hoLECl3wR3jUxGb1kNVt+GB
GuK6AHtJ7plVjfMYaAJtjYJnBaCGTCt3GuSzGJhoES0RkC/u1knuQBe87hKhzCc=
=gYGK
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix and cleanup from Juergen Gross:
"This contains one fix for MSIX handling under Xen and a trivial
cleanup patch"
* tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Remove duplicate inclusion of linux/init.h
xen: do not re-use pirq number cached in pci device msi msg data
If an architecture uses 4level-fixup.h we don't need to do anything as
it includes 5level-fixup.h.
If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK
before inclusion of the header. It makes asm-generic code to use
5level-fixup.h.
If an architecture has 4-level paging or folds levels on its own,
include 5level-fixup.h directly.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Look for 'la57' in /proc/cpuinfo to see if your machine supports 5-level
paging.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vgic updates:
- Honour disabling the ITS
- Don't deadlock when deactivating own interrupts via MMIO
- Correctly expose the lact of IRQ/FIQ bypass on GICv3
I/O virtualization:
- Make KVM_CAP_NR_MEMSLOTS big enough for large guests with
many PCIe devices
General bug fixes:
- Gracefully handle exception generated with syndroms that
the host doesn't understand
- Properly invalidate TLBs on VHE systems
-----BEGIN PGP SIGNATURE-----
iQFJBAABCAAzFiEEaVjJ8iM8Xp1syoGKqzCcdLk7HqEFAljBIgcVHG1hcmMuenlu
Z2llckBhcm0uY29tAAoJEKswnHS5Ox6hXKUH/j2K+UJrvBISpjEnF8v1rXcXSMxZ
8z/MT/bsmjpX0t/+YBpmNYrEA06RCWGDt4J5kGnl4imS+Xtqr16XeKW/rrOlydE5
JlvKXs31AWxym9ASnmLf8A2rODNtOWXOUrbYLm6VDUHb8E5ou1U2ywSVOvXqMSYD
pHtoD9PRqIQqxJtcV5DtJ3Xgg7AsIdmeBtBz1UGmi9rwKMk1hfwXrIPb2HCraiuY
/11RdIuWy5py62fi+x+coyXtpbCyhDDcGjiHHu4eqCqXtIZ91KkDSPFXfx14PhHB
UTTUBPKFwCdY+FFsWJtX20I+jGQt1nVL1yMbytdVJbmOixtHPQkjz17ReRU=
=hplc
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM updates for v4.11-rc2
vgic updates:
- Honour disabling the ITS
- Don't deadlock when deactivating own interrupts via MMIO
- Correctly expose the lact of IRQ/FIQ bypass on GICv3
I/O virtualization:
- Make KVM_CAP_NR_MEMSLOTS big enough for large guests with
many PCIe devices
General bug fixes:
- Gracefully handle exception generated with syndroms that
the host doesn't understand
- Properly invalidate TLBs on VHE systems
Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(),
we have already checked that the MSR bitmap address is valid (4k aligned
and within physical limits). SDM doesn't specify what happens if the
there is no memory mapped at the valid address, but Intel CPUs treat the
situation as if the bitmap was configured to trap all MSRs.
KVM already does that by returning false and a correct handling doesn't
need the guest-trigerrable warning that was reported by syzkaller:
(The warning was originally there to catch some possible bugs in nVMX.)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709
nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline]
WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709
nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
panic+0x1fb/0x412 kernel/panic.c:179
__warn+0x1c4/0x1e0 kernel/panic.c:540
warn_slowpath_null+0x2c/0x40 kernel/panic.c:583
nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline]
nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640
enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline]
nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561
handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312
vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526
vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline]
vcpu_run arch/x86/kvm/x86.c:7044 [inline]
kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205
kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
[Jim Mattson explained the bare metal behavior: "I believe this behavior
would be documented in the chipset data sheet rather than the SDM,
since the chipset returns all 1s for an unclaimed read."]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
On POWERNV platform, in order to do DMA via IOMMU (i.e. 32bit DMA in
our case), a device needs an iommu_table pointer set via
set_iommu_table_base().
The codeflow is:
- pnv_pci_ioda2_setup_dma_pe()
- pnv_pci_ioda2_setup_default_config()
- pnv_ioda_setup_bus_dma() [1]
pnv_pci_ioda2_setup_dma_pe() creates IOMMU groups,
pnv_pci_ioda2_setup_default_config() does default DMA setup,
pnv_ioda_setup_bus_dma() takes a bus PE (on IODA2, all physical function
PEs as bus PEs except NPU), walks through all underlying buses and
devices, adds all devices to an IOMMU group and sets iommu_table.
On IODA2, when VFIO is used, it takes ownership over a PE which means it
removes all tables and creates new ones (with a possibility of sharing
them among PEs). So when the ownership is returned from VFIO to
the kernel, the iommu_table pointer written to a device at [1] is
stale and needs an update.
This adds an "add_to_group" parameter to pnv_ioda_setup_bus_dma()
(in fact re-adds as it used to be there a while ago for different
reasons) to tell the helper if a device needs to be added to
an IOMMU group with an iommu_table update or just the latter.
This calls pnv_ioda_setup_bus_dma(..., false) from
pnv_ioda2_release_ownership() so when the ownership is restored,
32bit DMA can work again for a device. This does the same thing
on obtaining ownership as the iommu_table point is stale at this point
anyway and it is safer to have NULL there.
We did not hit this earlier as all tested devices in recent years were
only using 64bit DMA; the rare exception for this is MPT3 SAS adapter
which uses both 32bit and 64bit DMA access and it has not been tested
with VFIO much.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Having only 32 memslots is a real constraint for the maximum
number of PCI devices that can be assigned to a single guest.
Assuming each PCI device/virtual function having two memory BAR
regions, we could assign only 15 devices/virtual functions to a
guest.
Hence increase KVM_USER_MEM_SLOTS to 512 as done in other archs like
powerpc.
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Linu Cherian <linu.cherian@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Return KVM_USER_MEM_SLOTS for userspace capability query on
NR_MEMSLOTS.
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Linu Cherian <linu.cherian@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The IODA2 specification says that a 64 DMA address cannot use top 4 bits
(3 are reserved and one is a "TVE select"); bottom page_shift bits
cannot be used for multilevel table addressing either.
The existing IODA2 table allocation code aligns the minimum TCE table
size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages,
we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs
13 bits, the maximum number of levels is 48/13 = 3 so we physically
cannot address more and EEH happens on DMA accesses.
This adds a check that too many levels were requested.
It is still possible to have 5 levels in the case of 4K system page size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Jon Mason