In the course of some operations, we look up the perag from
the mount multiple times to get or change perag information.
These are often very short pieces of code, so while the
lookup cost is generally low, the cost of the lookup is far
higher than the cost of the operation we are doing on the
perag.
Since we changed buffers to hold references to the perag
they are cached in, many modification contexts already hold
active references to the perag that are held across these
operations. This is especially true for any operation that
is serialised by an allocation group header buffer.
In these cases, we can just use the buffer's reference to
the perag to avoid needing to do lookups to access the
perag. This means that many operations don't need to do
perag lookups at all to access the perag because they've
already looked up objects that own persistent references
and hence can use that reference instead.
Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Depending on the workloads, the following circular locking dependency
warning between sb_internal (a percpu rwsem) and fs_reclaim (a pseudo
lock) may show up:
======================================================
WARNING: possible circular locking dependency detected
5.0.0-rc1+ #60 Tainted: G W
------------------------------------------------------
fsfreeze/4346 is trying to acquire lock:
0000000026f1d784 (fs_reclaim){+.+.}, at:
fs_reclaim_acquire.part.19+0x5/0x30
but task is already holding lock:
0000000072bfc54b (sb_internal){++++}, at: percpu_down_write+0xb4/0x650
which lock already depends on the new lock.
:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_internal);
lock(fs_reclaim);
lock(sb_internal);
lock(fs_reclaim);
*** DEADLOCK ***
4 locks held by fsfreeze/4346:
#0: 00000000b478ef56 (sb_writers#8){++++}, at: percpu_down_write+0xb4/0x650
#1: 000000001ec487a9 (&type->s_umount_key#28){++++}, at: freeze_super+0xda/0x290
#2: 000000003edbd5a0 (sb_pagefaults){++++}, at: percpu_down_write+0xb4/0x650
#3: 0000000072bfc54b (sb_internal){++++}, at: percpu_down_write+0xb4/0x650
stack backtrace:
Call Trace:
dump_stack+0xe0/0x19a
print_circular_bug.isra.10.cold.34+0x2f4/0x435
check_prev_add.constprop.19+0xca1/0x15f0
validate_chain.isra.14+0x11af/0x3b50
__lock_acquire+0x728/0x1200
lock_acquire+0x269/0x5a0
fs_reclaim_acquire.part.19+0x29/0x30
fs_reclaim_acquire+0x19/0x20
kmem_cache_alloc+0x3e/0x3f0
kmem_zone_alloc+0x79/0x150
xfs_trans_alloc+0xfa/0x9d0
xfs_sync_sb+0x86/0x170
xfs_log_sbcount+0x10f/0x140
xfs_quiesce_attr+0x134/0x270
xfs_fs_freeze+0x4a/0x70
freeze_super+0x1af/0x290
do_vfs_ioctl+0xedc/0x16c0
ksys_ioctl+0x41/0x80
__x64_sys_ioctl+0x73/0xa9
do_syscall_64+0x18f/0xd23
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is a false positive as all the dirty pages are flushed out before
the filesystem can be frozen.
One way to avoid this splat is to add GFP_NOFS to the affected allocation
calls by using the memalloc_nofs_save()/memalloc_nofs_restore() pair.
This shouldn't matter unless the system is really running out of memory.
In that particular case, the filesystem freeze operation may fail while
it was succeeding previously.
Without this patch, the command sequence below will show that the lock
dependency chain sb_internal -> fs_reclaim exists.
# fsfreeze -f /home
# fsfreeze --unfreeze /home
# grep -i fs_reclaim -C 3 /proc/lockdep_chains | grep -C 5 sb_internal
After applying the patch, such sb_internal -> fs_reclaim lock dependency
chain can no longer be found. Because of that, the locking dependency
warning will not be shown.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Make sure the rtbitmap is large enough to store the entire bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Ensure that the realtime bitmap file is backed entirely by written
extents. No holes, no unwritten blocks, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
This debug code is called on every xfs_iflush() call, which then
checks every inode in the buffer for non-zero unlinked list field.
Hence it checks every inode in the cluster buffer every time a
single inode on that cluster it flushed. This is resulting in:
- 38.91% 5.33% [kernel] [k] xfs_iflush
- 17.70% xfs_iflush
- 9.93% xfs_inobp_check
4.36% xfs_buf_offset
10% of the CPU time spent flushing inodes is repeatedly checking
unlinked fields in the buffer. We don't need to do this.
The other place we call xfs_inobp_check() is
xfs_iunlink_update_dinode(), and this is after we've done this
assert for the agino we are about to write into that inode:
ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino));
which means we've already checked that the agino we are about to
write is not 0 on debug kernels. The inode buffer verifiers do
everything else we need, so let's just remove this debug code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_iflush_done() does 3 distinct operations to the inodes attached
to the buffer. Separate these operations out into functions so that
it is easier to modify these operations independently in future.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we have all the dirty inodes attached to the cluster
buffer, we don't actually have to do radix tree lookups to find
them. Sure, the radix tree is efficient, but walking a linked list
of just the dirty inodes attached to the buffer is much better.
We are also no longer dependent on having a locked inode passed into
the function to determine where to start the lookup. This means we
can drop it from the function call and treat all inodes the same.
We also make xfs_iflush_cluster skip inodes marked with
XFS_IRECLAIM. This we avoid races with inodes that reclaim is
actively referencing or are being re-initialised by inode lookup. If
they are actually dirty, they'll get written by a future cluster
flush....
We also add a shutdown check after obtaining the flush lock so that
we catch inodes that are dirty in memory and may have inconsistent
state due to the shutdown in progress. We abort these inodes
directly and so they remove themselves directly from the buffer list
and the AIL rather than having to wait for the buffer to be failed
and callbacks run to be processed correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
with xfs_iflush() gone, we can rename xfs_iflush_int() back to
xfs_iflush(). Also move it up above xfs_iflush_cluster() so we don't
need the forward definition any more.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now we have a cached buffer on inode log items, we don't need
to do buffer lookups when flushing inodes anymore - all we need
to do is lock the buffer and we are ready to go.
This largely gets rid of the need for xfs_iflush(), which is
essentially just a mechanism to look up the buffer and flush the
inode to it. Instead, we can just call xfs_iflush_cluster() with a
few modifications to ensure it also flushes the inode we already
hold locked.
This allows the AIL inode item pushing to be almost entirely
non-blocking in XFS - we won't block unless memory allocation
for the cluster inode lookup blocks or the block device queues are
full.
Writeback during inode reclaim becomes a little more complex because
we now have to lock the buffer ourselves, but otherwise this change
is largely a functional no-op that removes a whole lot of code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rather than attach inodes to the cluster buffer just when we are
doing IO, attach the inodes to the cluster buffer when they are
dirtied. The means the buffer always carries a list of dirty inodes
that reference it, and we can use that list to make more fundamental
changes to inode writeback that aren't otherwise possible.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Once we have inodes pinning the cluster buffer and attached whenever
they are dirty, we no longer have a guarantee that the items are
flush locked when we lock the cluster buffer. Hence we cannot just
walk the buffer log item list and modify the attached inodes.
If the inode is not flush locked, we have to ILOCK it first and then
flush lock it to do all the prerequisite checks needed to avoid
races with other code. This is already handled by
xfs_ifree_get_one_inode(), so rework the inode iteration loop and
function to update all inodes in cache whether they are attached to
the buffer or not.
Note: we also remove the copying of the log item lsn to the
ili_flush_lsn as xfs_iflush_done() now uses the XFS_ISTALE flag to
trigger aborts and so flush lsn matching is not needed in IO
completion for processing freed inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode reclaim is quite different now to the way described in various
comments, so update all the comments explaining what it does and how
it works.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Clean up xfs_reclaim_inodes() callers. Most callers want blocking
behaviour, so just make the existing SYNC_WAIT behaviour the
default.
For the xfs_reclaim_worker(), just call xfs_reclaim_inodes_ag()
directly because we just want optimistic clean inode reclaim to be
done in the background.
For xfs_quiesce_attr() we can just remove the inode reclaim calls as
they are a historic relic that was required to flush dirty inodes
that contained unlogged changes. We now log all changes to the
inodes, so the sync AIL push from xfs_log_quiesce() called by
xfs_quiesce_attr() will do all the required inode writeback for
freeze.
Seeing as we now want to loop until all reclaimable inodes have been
reclaimed, make xfs_reclaim_inodes() loop on the XFS_ICI_RECLAIM_TAG
tag rather than having xfs_reclaim_inodes_ag() tell it that inodes
were skipped. This is much more reliable and will always loop until
all reclaimable inodes are reclaimed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All background reclaim is SYNC_TRYLOCK already, and even blocking
reclaim (SYNC_WAIT) can use trylock mechanisms as
xfs_reclaim_inodes_ag() will keep cycling until there are no more
reclaimable inodes. Hence we can kill SYNC_TRYLOCK from inode
reclaim and make everything unconditionally non-blocking.
We remove all the optimistic "avoid blocking on locks" checks done
in xfs_reclaim_inode_grab() as nothing blocks on locks anymore.
Further, checking XFS_IFLOCK optimistically can result in detecting
inodes in the process of being cleaned (i.e. between being removed
from the AIL and having the flush lock dropped), so for
xfs_reclaim_inodes() to reliably reclaim all inodes we need to drop
these checks anyway.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we attempt to reclaim an inode, the first thing we do is take
the inode lock. This is blocking right now, so if the inode being
accessed by something else (e.g. being flushed to the cluster
buffer) we will block here.
Change this to a trylock so that we do not block inode reclaim
unnecessarily here.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode reclaim will still throttle direct reclaim on the per-ag
reclaim locks. This is no longer necessary as reclaim can run
non-blocking now. Hence we can remove these locks so that we don't
arbitrarily block reclaimers just because there are more direct
reclaimers than there are AGs.
This can result in multiple reclaimers working on the same range of
an AG, but this doesn't cause any apparent issues. Optimising the
spread of concurrent reclaimers for best efficiency can be done in a
future patchset.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We no longer need to issue IO from shrinker based inode reclaim to
prevent spurious OOM killer invocation. This leaves only the global
filesystem management operations such as unmount needing to
writeback dirty inodes and reclaim them.
Instead of using the reclaim pass to write dirty inodes before
reclaiming them, use the AIL to push all the dirty inodes before we
try to reclaim them. This allows us to remove all the conditional
SYNC_WAIT locking and the writeback code from xfs_reclaim_inode()
and greatly simplify the checks we need to do to reclaim an inode.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that dirty inode writeback doesn't cause read-modify-write
cycles on the inode cluster buffer under memory pressure, the need
to throttle memory reclaim to the rate at which we can clean dirty
inodes goes away. That is due to the fact that we no longer thrash
inode cluster buffers under memory pressure to clean dirty inodes.
This means inode writeback no longer stalls on memory allocation
or read IO, and hence can be done asynchronously without generating
memory pressure. As a result, blocking inode writeback in reclaim is
no longer necessary to prevent reclaim priority windup as cleaning
dirty inodes is no longer dependent on having memory reserves
available for the filesystem to make progress reclaiming inodes.
Hence we can convert inode reclaim to be non-blocking for shrinker
callouts, both for direct reclaim and kswapd.
On a vanilla kernel, running a 16-way fsmark create workload on a
4 node/16p/16GB RAM machine, I can reliably pin 14.75GB of RAM via
userspace mlock(). The OOM killer gets invoked at 15GB of
pinned RAM.
Without the inode cluster pinning, this non-blocking reclaim patch
triggers premature OOM killer invocation with the same memory
pinning, sometimes with as much as 45% of RAM being free. It's
trivially easy to trigger the OOM killer when reclaim does not
block.
With pinning inode clusters in RAM and then adding this patch, I can
reliably pin 14.5GB of RAM and still have the fsmark workload run to
completion. The OOM killer gets invoked 14.75GB of pinned RAM, which
is only a small amount of memory less than the vanilla kernel. It is
much more reliable than just with async reclaim alone.
simoops shows that allocation stalls go away when async reclaim is
used. Vanilla kernel:
Run time: 1924 seconds
Read latency (p50: 3,305,472) (p95: 3,723,264) (p99: 4,001,792)
Write latency (p50: 184,064) (p95: 553,984) (p99: 807,936)
Allocation latency (p50: 2,641,920) (p95: 3,911,680) (p99: 4,464,640)
work rate = 13.45/sec (avg 13.44/sec) (p50: 13.46) (p95: 13.58) (p99: 13.70)
alloc stall rate = 3.80/sec (avg: 2.59) (p50: 2.54) (p95: 2.96) (p99: 3.02)
With inode cluster pinning and async reclaim:
Run time: 1924 seconds
Read latency (p50: 3,305,472) (p95: 3,715,072) (p99: 3,977,216)
Write latency (p50: 187,648) (p95: 553,984) (p99: 789,504)
Allocation latency (p50: 2,748,416) (p95: 3,919,872) (p99: 4,448,256)
work rate = 13.28/sec (avg 13.32/sec) (p50: 13.26) (p95: 13.34) (p99: 13.34)
alloc stall rate = 0.02/sec (avg: 0.02) (p50: 0.01) (p95: 0.03) (p99: 0.03)
Latencies don't really change much, nor does the work rate. However,
allocation almost never stalls with these changes, whilst the
vanilla kernel is sometimes reporting 20 stalls/s over a 60s sample
period. This difference is due to inode reclaim being largely
non-blocking now.
IOWs, once we have pinned inode cluster buffers, we can make inode
reclaim non-blocking without a major risk of premature and/or
spurious OOM killer invocation, and without any changes to memory
reclaim infrastructure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we dirty an inode, we are going to have to write it disk at
some point in the near future. This requires the inode cluster
backing buffer to be present in memory. Unfortunately, under severe
memory pressure we can reclaim the inode backing buffer while the
inode is dirty in memory, resulting in stalling the AIL pushing
because it has to do a read-modify-write cycle on the cluster
buffer.
When we have no memory available, the read of the cluster buffer
blocks the AIL pushing process, and this causes all sorts of issues
for memory reclaim as it requires inode writeback to make forwards
progress. Allocating a cluster buffer causes more memory pressure,
and results in more cluster buffers to be reclaimed, resulting in
more RMW cycles to be done in the AIL context and everything then
backs up on AIL progress. Only the synchronous inode cluster
writeback in the the inode reclaim code provides some level of
forwards progress guarantees that prevent OOM-killer rampages in
this situation.
Fix this by pinning the inode backing buffer to the inode log item
when the inode is first dirtied (i.e. in xfs_trans_log_inode()).
This may mean the first modification of an inode that has been held
in cache for a long time may block on a cluster buffer read, but
we can do that in transaction context and block safely until the
buffer has been allocated and read.
Once we have the cluster buffer, the inode log item takes a
reference to it, pinning it in memory, and attaches it to the log
item for future reference. This means we can always grab the cluster
buffer from the inode log item when we need it.
When the inode is finally cleaned and removed from the AIL, we can
drop the reference the inode log item holds on the cluster buffer.
Once all inodes on the cluster buffer are clean, the cluster buffer
will be unpinned and it will be available for memory reclaim to
reclaim again.
This avoids the issues with needing to do RMW cycles in the AIL
pushing context, and hence allows complete non-blocking inode
flushing to be performed by the AIL pushing context.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ail_delete_one() is called directly from dquot and inode IO
completion, as well as from the generic xfs_trans_ail_delete()
function. Inodes are about to have their own failure handling, and
dquots will in future, too. Pull the clearing of the LI_FAILED flag
up into the callers so we can customise the code appropriately.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When an buffer IO error occurs, we want to mark all
the log items attached to the buffer as failed. Open code
the error handling loop so that we can modify the flagging for the
different types of objects directly and independently of each other.
This also allows us to remove the ->iop_error method from the log
item operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently when a buffer with attached log items has an IO error
it called ->iop_error for each attched log item. These all call
xfs_set_li_failed() to handle the error, but we are about to change
the way log items manage buffers. hence we first need to remove the
per-item dependency on buffer handling done by xfs_set_li_failed().
We already have specific buffer type IO completion routines, so move
the log item error handling out of the generic error handling and
into the log item specific functions so we can implement per-type
error handling easily.
This requires a more complex return value from the error handling
code so that we can take the correct action the failure handling
requires. This results in some repeated boilerplate in the
functions, but that can be cleaned up later once all the changes
cascade through this code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
They are not used anymore, so remove them from the log item and the
buffer iodone attachment interfaces.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we've sorted inode and dquot buffers, we can apply the same
cleanups to dirty buffers with buffer log items. They only have one
callback, too, so we don't need the log item callback. Collapse the
iodone functions and remove all the now unnecessary infrastructure
around callback processing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Similar to inodes, we can call the dquot IO completion functions
directly from the buffer completion code, removing another user of
log item callbacks for IO completion processing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Having different io completion callbacks for different inode states
makes things complex. We can detect if the inode is stale via the
XFS_ISTALE flag in IO completion, so we don't need a special
callback just for this.
This means inodes only have a single iodone callback, and inode IO
completion is entirely buffer centric at this point. Hence we no
longer need to use a log item callback at all as we can just call
xfs_iflush_done() directly from the buffer completions and walk the
buffer log item list to complete the all inodes under IO.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we've emptied the buffer log item list, it does a list_del_init
on itself to reset it's pointers to itself. This is unnecessary as
the list is already empty at this point - it was a left-over
fragment from the list_head conversion of the buffer log item list.
Remove them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All unmarked dirty buffers should be in the AIL and have log items
attached to them. Hence when they are written, we will run a
callback to remove the item from the AIL if appropriate. Now that
we've handled inode and dquot buffers, all remaining calls are to
xfs_buf_iodone() and so we can hard code this rather than use an
indirect call.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log recovery has it's own buffer write completion handler for
buffers that it directly recovers. Convert these to direct calls by
flagging these buffers as being log recovery buffers. The flag will
get cleared by the log recovery IO completion routine, so it will
never leak out of log recovery.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
dquot buffers always have write IO callbacks, so by marking them
directly we can avoid needing to attach ->b_iodone functions to
them. This avoids an indirect call, and makes future modifications
much simpler.
This is largely a rearrangement of the code at this point - no IO
completion functionality changes at this point, just how the
code is run is modified.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode buffers always have write IO callbacks, so by marking them
directly we can avoid needing to attach ->b_iodone functions to
them. This avoids an indirect call, and makes future modifications
much simpler.
While this is largely a refactor of existing functionality, we
broaden the scope of the flag to beyond where inodes are explicitly
attached because future changes need to know what type of log items
are attached to the buffer. Adding this buffer flag may invoke the
inode iodone callback in cases where it wouldn't have been
previously, but this is not a functional change because the callback
is identical to the normal buffer write iodone callback when inodes
are not attached.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode log item is kind of special in that it can be aggregating
new changes in memory at the same time time existing changes are
being written back to disk. This means there are fields in the log
item that are accessed concurrently from contexts that don't share
any locking at all.
e.g. updating ili_last_fields occurs at flush time under the
ILOCK_EXCL and flush lock at flush time, under the flush lock at IO
completion time, and is read under the ILOCK_EXCL when the inode is
logged. Hence there is no actual serialisation between reading the
field during logging of the inode in transactions vs clearing the
field in IO completion.
We currently get away with this by the fact that we are only
clearing fields in IO completion, and nothing bad happens if we
accidentally log more of the inode than we actually modify. Worst
case is we consume a tiny bit more memory and log bandwidth.
However, if we want to do more complex state manipulations on the
log item that requires updates at all three of these potential
locations, we need to have some mechanism of serialising those
operations. To do this, introduce a spinlock into the log item to
serialise internal state.
This could be done via the xfs_inode i_flags_lock, but this then
leads to potential lock inversion issues where inode flag updates
need to occur inside locks that best nest inside the inode log item
locks (e.g. marking inodes stale during inode cluster freeing).
Using a separate spinlock avoids these sorts of problems and
simplifies future code.
This does not touch the use of ili_fields in the item formatting
code - that is entirely protected by the ILOCK_EXCL at this point in
time, so it remains untouched.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This was used to track if the item had logged fields being flushed
to disk. We log everything in the inode these days, so this logic is
no longer needed. Remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In tracking down a problem in this patchset, I discovered we are
reclaiming dirty stale inodes. This wasn't discovered until inodes
were always attached to the cluster buffer and then the rcu callback
that freed inodes was assert failing because the inode still had an
active pointer to the cluster buffer after it had been reclaimed.
Debugging the issue indicated that this was a pre-existing issue
resulting from the way the inodes are handled in xfs_inactive_ifree.
When we free a cluster buffer from xfs_ifree_cluster, all the inodes
in cache are marked XFS_ISTALE. Those that are clean have nothing
else done to them and so eventually get cleaned up by background
reclaim. i.e. it is assumed we'll never dirty/relog an inode marked
XFS_ISTALE.
On journal commit dirty stale inodes as are handled by both
buffer and inode log items to run though xfs_istale_done() and
removed from the AIL (buffer log item commit) or the log item will
simply unpin it because the buffer log item will clean it. What happens
to any specific inode is entirely dependent on which log item wins
the commit race, but the result is the same - stale inodes are
clean, not attached to the cluster buffer, and not in the AIL. Hence
inode reclaim can just free these inodes without further care.
However, if the stale inode is relogged, it gets dirtied again and
relogged into the CIL. Most of the time this isn't an issue, because
relogging simply changes the inode's location in the current
checkpoint. Problems arise, however, when the CIL checkpoints
between two transactions in the xfs_inactive_ifree() deferops
processing. This results in the XFS_ISTALE inode being redirtied
and inserted into the CIL without any of the other stale cluster
buffer infrastructure being in place.
Hence on journal commit, it simply gets unpinned, so it remains
dirty in memory. Everything in inode writeback avoids XFS_ISTALE
inodes so it can't be written back, and it is not tracked in the AIL
so there's not even a trigger to attempt to clean the inode. Hence
the inode just sits dirty in memory until inode reclaim comes along,
sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming
of a dirty inode caused use after free, list corruptions and other
nasty issues later in this patchset.
Hence this patch addresses a violation of the "never log XFS_ISTALE
inodes" caused by the deferops processing rolling a transaction
and relogging a stale inode in xfs_inactive_free. It also adds a
bunch of asserts to catch this problem in debug kernels so that
we don't reintroduce this problem in future.
Reproducer for this issue was generic/558 on a v4 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove current_pid(), current_test_flags() and
current_clear_flags_nested(), because they are useless.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The page faultround path ->map_pages is implemented in XFS via
filemap_map_pages(). This function checks that pages found in page
cache lookups have not raced with truncate based invalidation by
checking page->mapping is correct and page->index is within EOF.
However, we've known for a long time that this is not sufficient to
protect against races with invalidations done by operations that do
not change EOF. e.g. hole punching and other fallocate() based
direct extent manipulations. The way we protect against these
races is we wrap the page fault operations in a XFS_MMAPLOCK_SHARED
lock so they serialise against fallocate and truncate before calling
into the filemap function that processes the fault.
Do the same for XFS's ->map_pages implementation to close this
potential data corruption issue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the double-inode locking helpers to xfs_inode.c since they're not
specific to reflink.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor the two functions that we use to lock and unlock two inodes to
block userspace from initiating IO against a file, whether via system
calls or mmap activity.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Fix the return value of xfs_reflink_remap_prep so that its return value
conventions match the rest of xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If the source and destination map are identical, we can skip the remap
step to save some time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When logging quota block count updates during a reflink operation, we
only log the /delta/ of the block count changes to the dquot. Since we
now know ahead of time the extent type of both dmap and smap (and that
they have the same length), we know that we only need to reserve quota
blocks for dmap's blockcount if we're mapping it into a hole.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we've reworked xfs_reflink_remap_extent to remap only one
extent per transaction, we actually know if the extent being removed is
an allocated mapping. This means that we now know ahead of time if
we're going to be touching the data fork.
Since we only need blocks for a bmbt split if we're going to update the
data fork, we only need to get quota reservation if we know we're going
to touch the data fork.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The existing reflink remapping loop has some structural problems that
need addressing:
The biggest problem is that we create one transaction for each extent in
the source file without accounting for the number of mappings there are
for the same range in the destination file. In other words, we don't
know the number of remap operations that will be necessary and we
therefore cannot guess the block reservation required. On highly
fragmented filesystems (e.g. ones with active dedupe) we guess wrong,
run out of block reservation, and fail.
The second problem is that we don't actually use the bmap intents to
their full potential -- instead of calling bunmapi directly and having
to deal with its backwards operation, we could call the deferred ops
xfs_bmap_unmap_extent and xfs_refcount_decrease_extent instead. This
makes the frontend loop much simpler.
Solve all of these problems by refactoring the remapping loops so that
we only perform one remapping operation per transaction, and each
operation only tries to remap a single extent from source to dest.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reported-by: Edwin Török <edwin@etorok.net>
Tested-by: Edwin Török <edwin@etorok.net>
The name of this predicate is a little misleading -- it decides if the
extent mapping is allocated and written. Change the name to be more
direct, as we're going to add a new predicate in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Quota reservations are supposed to account for the blocks that might be
allocated due to a bmap btree split. Reflink doesn't do this, so fix
this to make the quota accounting more accurate before we start
rearranging things.
Fixes: 862bb360ef ("xfs: reflink extents from one file to another")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The data fork scrubber calls filemap_write_and_wait to flush dirty pages
and delalloc reservations out to disk prior to checking the data fork's
extent mappings. Unfortunately, this means that scrub can consume the
EIO/ENOSPC errors that would otherwise have stayed around in the address
space until (we hope) the writer application calls fsync to persist data
and collect errors. The end result is that programs that wrote to a
file might never see the error code and proceed as if nothing were
wrong.
xfs_scrub is not in a position to notify file writers about the
writeback failure, and it's only here to check metadata, not file
contents. Therefore, if writeback fails, we should stuff the error code
back into the address space so that an fsync by the writer application
can pick that up.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The rmapbt extent swap algorithm remaps individual extents between
the source inode and the target to trigger reverse mapping metadata
updates. If either inode straddles a format or other bmap allocation
boundary, the individual unmap and map cycles can trigger repeated
bmap block allocations and frees as the extent count bounces back
and forth across the boundary. While net block usage is bound across
the swap operation, this behavior can prematurely exhaust the
transaction block reservation because it continuously drains as the
transaction rolls. Each allocation accounts against the reservation
and each free returns to global free space on transaction roll.
The previous workaround to this problem attempted to detect this
boundary condition and provide surplus block reservation to
acommodate it. This is insufficient because more remaps can occur
than implied by the extent counts; if start offset boundaries are
not aligned between the two inodes, for example.
To address this problem more generically and dynamically, add a
transaction accounting mode that returns freed blocks to the
transaction reservation instead of the superblock counters on
transaction roll and use it when the rmapbt based algorithm is
active. This allows the chain of remap transactions to preserve the
block reservation based own its own frees and prevent premature
exhaustion regardless of the remap pattern. Note that this is only
safe for superblocks with lazy sb accounting, but the latter is
required for v5 supers and the rmap feature depends on v5.
Fixes: b3fed43482 ("xfs: account format bouncing into rmapbt swapext tx reservation")
Root-caused-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just use bd_disk->queue instead.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
xlog_wait() on the CIL context can reference a freed context if the
waiter doesn't get scheduled before the CIL context is freed. This
can happen when a task is on the hard throttle and the CIL push
aborts due to a shutdown. This was detected by generic/019:
thread 1 thread 2
__xfs_trans_commit
xfs_log_commit_cil
<CIL size over hard throttle limit>
xlog_wait
schedule
xlog_cil_push_work
wake_up_all
<shutdown aborts commit>
xlog_cil_committed
kmem_free
remove_wait_queue
spin_lock_irqsave --> UAF
Fix it by moving the wait queue to the CIL rather than keeping it in
in the CIL context that gets freed on push completion. Because the
wait queue is now independent of the CIL context and we might have
multiple contexts in flight at once, only wake the waiters on the
push throttle when the context we are pushing is over the hard
throttle size threshold.
Fixes: 0e7ab7efe7 ("xfs: Throttle commits on delayed background CIL push")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only use of I_DIRTY_TIME_EXPIRE is to detect in
__writeback_single_inode() that inode got there because flush worker
decided it's time to writeback the dirty inode time stamps (either
because we are syncing or because of age). However we can detect this
directly in __writeback_single_inode() and there's no need for the
strange propagation with I_DIRTY_TIME_EXPIRE flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
- Fix a resource leak on an error bailout.
-----BEGIN PGP SIGNATURE-----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=C0rZ
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"We've settled down into the bugfix phase; this one fixes a resource
leak on an error bailout path"
* tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
- Teach XFS to ask the VFS to drop an inode if the administrator changes
the FS_XFLAG_DAX inode flag such that the S_DAX state would change.
This can result in files changing access modes without requiring an
unmount cycle.
-----BEGIN PGP SIGNATURE-----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=mKZf
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part three from Darrick Wong:
"Now that the xfs changes have landed, this third piece changes the
FS_XFLAG_DAX ioctl code in xfs to request that the inode be reloaded
after the last program closes the file, if doing so would make a S_DAX
change happen. The goal here is to make dax access mode switching
quicker when possible.
Summary:
- Teach XFS to ask the VFS to drop an inode if the administrator
changes the FS_XFLAG_DAX inode flag such that the S_DAX state would
change. This can result in files changing access modes without
requiring an unmount cycle"
* tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs/xfs: Update xfs_ioctl_setattr_dax_invalidate()
fs/xfs: Combine xfs_diflags_to_linux() and xfs_diflags_to_iflags()
fs/xfs: Create function xfs_inode_should_enable_dax()
fs/xfs: Make DAX mount option a tri-state
fs/xfs: Change XFS_MOUNT_DAX to XFS_MOUNT_DAX_ALWAYS
fs/xfs: Remove unnecessary initialization of i_rwsem
xfs_ifree_cluster() calls xfs_perag_get() at the beginning, but forgets to
call xfs_perag_put() in one failed path.
Add the missed function call to fix it.
Fixes: ce92464c18 ("xfs: make xfs_trans_get_buf return an error code")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
* Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
* Clean up fiemap handling in ext4
* Clean up and refactor multiple block allocator (mballoc) code
* Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
* Fixed a race in ext4_sync_parent() versus rename()
* Simplify the error handling in the extent manipulation code
* Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and
ext4_make_inode_dirty()'s callers.
* Avoid passing an error pointer to brelse in ext4_xattr_set()
* Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
* Fix refcount handling if ext4_iget() fails
* Fix a crash in generic/019 caused by a corrupted extent node
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl7Ze8kACgkQ8vlZVpUN
gaNChAf4xn0ytFSrweI/S2Sp05G/2L/ocZ2TZZk2ZdGeN1E+ABdSIv/zIF9zuFgZ
/pY/C+fyEZWt4E3FlNO8gJzoEedkzMCMnUhSIfI+wZbcclyTOSNMJtnrnJKAEtVH
HOvGZJmg357jy407RCGhZpJ773nwU2xhBTr5OFxvSf9mt/vzebxIOnw5D7HPlC1V
Fgm6Du8q+tRrPsyjv1Yu4pUEVXMJ7qUcvt326AXVM3kCZO1Aa5GrURX0w3J4mzW1
tc1tKmtbLcVVYTo9CwHXhk/edbxrhAydSP2iACand3tK6IJuI6j9x+bBJnxXitnr
vsxsfTYMG18+2SxrJ9LwmagqmrRq
=HMTs
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
- Introduce DONTCACHE flags for dentries and inodes. This hint will
cause the VFS to drop the associated objects immediately after the
last put, so that we can change the file access mode (DAX or page
cache) on the fly.
-----BEGIN PGP SIGNATURE-----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=ebl3
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part two from Darrick Wong:
"This time around, we're hoisting the DONTCACHE flag from XFS into the
VFS so that we can make the incore DAX mode changes become effective
sooner.
We can't change the file data access mode on a live inode because we
don't have a safe way to change the file ops pointers. The incore
state change becomes effective at inode loading time, which can happen
if the inode is evicted. Therefore, we're making it so that
filesystems can ask the VFS to evict the inode as soon as the last
holder drops.
The per-fs changes to make this call this will be in subsequent pull
requests from Ted and myself.
Summary:
- Introduce DONTCACHE flags for dentries and inodes. This hint will
cause the VFS to drop the associated objects immediately after the
last put, so that we can change the file access mode (DAX or page
cache) on the fly"
* tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: Introduce DCACHE_DONTCACHE
fs: Lift XFS_IDONTCACHE to the VFS layer
- Various cleanups to remove dead code, unnecessary conditionals,
asserts, etc.
- Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
redundantly.
- Tighten up our dmesg logging to ensure that everything is prefixed
with 'XFS' for easier grepping.
- Kill a bunch of typedefs.
- Refactor the deferred ops code to reduce indirect function calls.
- Increase type-safety with the deferred ops code.
- Make the DAX mount options a tri-state.
- Fix some error handling problems in the inode flush code and clean up
other inode flush warts.
- Refactor log recovery so that each log item recovery functions now live
with the other log item processing code.
- Fix some SPDX forms.
- Fix quota counter corruption if the fs crashes after running
quotacheck but before any dquots get logged.
- Don't fail metadata verification on zero-entry attr leaf blocks, since
they're just part of the disk format now due to a historic lack of log
atomicity.
- Don't allow SWAPEXT between files with different [ugp]id when quotas
are enabled.
- Refactor inode fork reading and verification to run directly from the
inode-from-disk function. This means that we now actually guarantee
that _iget'ted inodes are totally verified and ready to go.
- Move the incore inode fork format and extent counts to the ifork
structure.
- Scalability improvements by reducing cacheline pingponging in
struct xfs_mount.
- More scalability improvements by removing m_active_trans from the
hot path.
- Fix inode counter update sanity checking to run /only/ on debug
kernels.
- Fix longstanding inconsistency in what error code we return when a
program hits project quota limits (ENOSPC).
- Fix group quota returning the wrong error code when a program hits
group quota limits.
- Fix per-type quota limits and grace periods for group and project
quotas so that they actually work.
- Allow extension of individual grace periods.
- Refactor the non-reclaim inode radix tree walking code to remove a
bunch of stupid little functions and straighten out the
inconsistent naming schemes.
- Fix a bug in speculative preallocation where we measured a new
allocation based on the last extent mapping in the file instead of
looking farther for the last contiguous space allocation.
- Force delalloc writes to unwritten extents. This closes a
stale disk contents exposure vector if the system goes down before
the write completes.
- More lockdep whackamole.
-----BEGIN PGP SIGNATURE-----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=/NYc
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Most of the changes this cycle are refactoring of existing code in
preparation for things landing in the future.
We also fixed various problems and deficiencies in the quota
implementation, and (I hope) the last of the stale read vectors by
forcing write allocations to go through the unwritten state until the
write completes.
Summary:
- Various cleanups to remove dead code, unnecessary conditionals,
asserts, etc.
- Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
redundantly.
- Tighten up our dmesg logging to ensure that everything is prefixed
with 'XFS' for easier grepping.
- Kill a bunch of typedefs.
- Refactor the deferred ops code to reduce indirect function calls.
- Increase type-safety with the deferred ops code.
- Make the DAX mount options a tri-state.
- Fix some error handling problems in the inode flush code and clean
up other inode flush warts.
- Refactor log recovery so that each log item recovery functions now
live with the other log item processing code.
- Fix some SPDX forms.
- Fix quota counter corruption if the fs crashes after running
quotacheck but before any dquots get logged.
- Don't fail metadata verification on zero-entry attr leaf blocks,
since they're just part of the disk format now due to a historic
lack of log atomicity.
- Don't allow SWAPEXT between files with different [ugp]id when
quotas are enabled.
- Refactor inode fork reading and verification to run directly from
the inode-from-disk function. This means that we now actually
guarantee that _iget'ted inodes are totally verified and ready to
go.
- Move the incore inode fork format and extent counts to the ifork
structure.
- Scalability improvements by reducing cacheline pingponging in
struct xfs_mount.
- More scalability improvements by removing m_active_trans from the
hot path.
- Fix inode counter update sanity checking to run /only/ on debug
kernels.
- Fix longstanding inconsistency in what error code we return when a
program hits project quota limits (ENOSPC).
- Fix group quota returning the wrong error code when a program hits
group quota limits.
- Fix per-type quota limits and grace periods for group and project
quotas so that they actually work.
- Allow extension of individual grace periods.
- Refactor the non-reclaim inode radix tree walking code to remove a
bunch of stupid little functions and straighten out the
inconsistent naming schemes.
- Fix a bug in speculative preallocation where we measured a new
allocation based on the last extent mapping in the file instead of
looking farther for the last contiguous space allocation.
- Force delalloc writes to unwritten extents. This closes a stale
disk contents exposure vector if the system goes down before the
write completes.
- More lockdep whackamole"
* tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (129 commits)
xfs: more lockdep whackamole with kmem_alloc*
xfs: force writes to delalloc regions to unwritten
xfs: refactor xfs_iomap_prealloc_size
xfs: measure all contiguous previous extents for prealloc size
xfs: don't fail unwritten extent conversion on writeback due to edquot
xfs: rearrange xfs_inode_walk_ag parameters
xfs: straighten out all the naming around incore inode tree walks
xfs: move xfs_inode_ag_iterator to be closer to the perag walking code
xfs: use bool for done in xfs_inode_ag_walk
xfs: fix inode ag walk predicate function return values
xfs: refactor eofb matching into a single helper
xfs: remove __xfs_icache_free_eofblocks
xfs: remove flags argument from xfs_inode_ag_walk
xfs: remove xfs_inode_ag_iterator_flags
xfs: remove unused xfs_inode_ag_iterator function
xfs: replace open-coded XFS_ICI_NO_TAG
xfs: move eofblocks conversion function to xfs_ioctl.c
xfs: allow individual quota grace period extension
xfs: per-type quota timers and warn limits
xfs: switch xfs_get_defquota to take explicit type
...
-----BEGIN PGP SIGNATURE-----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=HYf4
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
block: mark bio_wouldblock_error() bio with BIO_QUIET
blk-wbt: rename __wbt_update_limits to wbt_update_limits
blk-wbt: remove wbt_update_limits
blk-throttle: remove tg_drain_bios
blk-throttle: remove blk_throtl_drain
null_blk: force complete for timeout request
blk-mq: drain I/O when all CPUs in a hctx are offline
blk-mq: add blk_mq_all_tag_iter
blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk-mq: use BLK_MQ_NO_TAG in more places
blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
blk-mq: move more request initialization to blk_mq_rq_ctx_init
blk-mq: simplify the blk_mq_get_request calling convention
blk-mq: remove the bio argument to ->prepare_request
nvme: force complete cancelled requests
blk-mq: blk-mq: provide forced completion method
block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
block: blk-crypto-fallback: remove redundant initialization of variable err
block: reduce part_stat_lock() scope
block: use __this_cpu_add() instead of access by smp_processor_id()
...
This is always PAGE_KERNEL - for long term mappings with other properties
vmap should be used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-19-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the new readahead operation in iomap. Convert XFS and ZoneFS to use
it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-26-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because of the separation of FS_XFLAG_DAX from S_DAX and the delayed
setting of S_DAX, data invalidation no longer needs to happen when
FS_XFLAG_DAX is changed.
Change xfs_ioctl_setattr_dax_invalidate() to be
xfs_ioctl_dax_check_set_cache() and alter the code to reflect the new
functionality.
Furthermore, we no longer need the locking so we remove the join_flags
logic.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The functionality in xfs_diflags_to_linux() and xfs_diflags_to_iflags() are
nearly identical. The only difference is that *_to_linux() is called after
inode setup and disallows changing the DAX flag.
Combining them can be done with a flag which indicates if this is the initial
setup to allow the DAX flag to be properly set only at init time.
So remove xfs_diflags_to_linux() and call the modified xfs_diflags_to_iflags()
directly.
While we are here simplify xfs_diflags_to_iflags() to take struct xfs_inode and
use xfs_ip2xflags() to ensure future diflags are included correctly.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_inode_supports_dax() should reflect if the inode can support DAX not
that it is enabled for DAX.
Change the use of xfs_inode_supports_dax() to reflect only if the inode
and underlying storage support dax.
Add a new function xfs_inode_should_enable_dax() which reflects if the
inode should be enabled for DAX.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
As agreed upon[1]. We make the dax mount option a tri-state. '-o dax'
continues to operate the same. We add 'always', 'never', and 'inode'
(default).
[1] https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In prep for the new tri-state mount option which then introduces
XFS_MOUNT_DAX_NEVER.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
An earlier call of xfs_reinit_inode() from xfs_iget_cache_hit() already
handles initialization of i_rwsem.
Doing so again is unneeded.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When writing to a delalloc region in the data fork, commit the new
allocations (of the da reservation) as unwritten so that the mappings
are only marked written once writeback completes successfully. This
fixes the problem of stale data exposure if the system goes down during
targeted writeback of a specific region of a file, as tested by
generic/042.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor xfs_iomap_prealloc_size to be the function that dynamically
computes the per-file preallocation size by moving the allocsize= case
to the caller. Break up the huge comment preceding the function to
annotate the relevant parts of the code, and remove the impossible
check_writeio case.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're estimating a new speculative preallocation length for an
extending write, we should walk backwards through the extent list to
determine the number of number of blocks that are physically and
logically contiguous with the write offset, and use that as an input to
the preallocation size computation.
This way, preallocation length is truly measured by the effectiveness of
the allocator in giving us contiguous allocations without being
influenced by the state of a given extent. This fixes both the problem
where ZERO_RANGE within an EOF can reduce preallocation, and prevents
the unnecessary shrinkage of preallocation when delalloc extents are
turned into unwritten extents.
This was found as a regression in xfs/014 after changing delalloc writes
to create unwritten extents during writeback.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
During writeback, it's possible for the quota block reservation in
xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota
limit. This causes writeback errors for data that was already written
to disk, when it's not even guaranteed that the bmbt will expand to
exceed the quota limit. Irritatingly, this condition is reported to
userspace as EIO by fsync, which is confusing.
We wrote the data, so allow the reservation. That might put us slightly
above the hard limit, but it's better than losing data after a write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The perag structure already has a pointer to the xfs_mount, so we don't
need to pass that separately and can drop it. Having done that, move
iter_flags so that the argument order is the same between xfs_inode_walk
and xfs_inode_walk_ag. The latter will make things less confusing for a
future patch that enables background scanning work to be done in
parallel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We're not very consistent about function names for the incore inode
iteration function. Turn them all into xfs_inode_walk* variants.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the xfs_inode_ag_iterator function to be nearer xfs_inode_ag_walk
so that we don't have to scroll back and forth to figure out how the
incore inode walking function works. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This is a boolean variable, so use the bool type.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There are a number of predicate functions that help the incore inode
walking code decide if we really want to apply the iteration function to
the inode. These are boolean decisions, so change the return types to
boolean to match.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor the two eofb-matching logics into a single helper so that we
don't repeat ourselves.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is now a pointless wrapper, so kill it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The incore inode walk code passes a flags argument and a pointer from
the xfs_inode_ag_iterator caller all the way to the iteration function.
We can reduce the function complexity by passing flags through the
private pointer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Combine xfs_inode_ag_iterator_flags and xfs_inode_ag_iterator_tag into a
single wrapper function since there's only one caller of the _flags
variant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Not used by anyone, so get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use XFS_ICI_NO_TAG instead of -1 when appropriate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move xfs_fs_eofblocks_from_user into the only file that actually uses
it, so that we don't have this function cluttering up the header file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The only grace period which can be set in the kernel today is for id 0,
i.e. the default grace period for all users. However, setting an
individual grace period is useful; for example:
Alice has a soft quota of 100 inodes, and a hard quota of 200 inodes
Alice uses 150 inodes, and enters a short grace period
Alice really needs to use those 150 inodes past the grace period
The administrator extends Alice's grace period until next Monday
vfs quota users such as ext4 can do this today, with setquota -T
To enable this for XFS, we simply move the timelimit assignment out
from under the (id == 0) test. Default setting remains under (id == 0).
Note that this now is consistent with how we set warnings.
(Userspace requires updates to enable this as well; xfs_quota needs to
parse new options, and setquota needs to set appropriate field flags.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move timers and warnings out of xfs_quotainfo and into xfs_def_quota
so that we can utilize them on a per-type basis, rather than enforcing
them based on the values found in the first enabled quota type.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[zlang: new way to get defquota in xfs_qm_init_timelimits]
[zlang: remove redundant defq assign]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_get_defquota() currently takes an xfs_dquot, and from that obtains
the type of default quota we should get (user/group/project).
But early in init, we don't have access to a fully set up quota, so
that's not possible. The next patch needs go set up default quota
timers early, so switch xfs_get_defquota to take an explicit type
and add a helper function to obtain that type from an xfs_dquot
for the existing callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pass xfs_dquot rather than xfs_disk_dquot to xfs_qm_adjust_dqtimers;
this makes it symmetric with xfs_qm_adjust_dqlimits and will help
the next patch.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is a fair bit of whitespace damage in the quota code, so
fix up enough of it that subsequent patches are restricted to
functional change to aid review.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS project quota treats project hierarchies as "mini filesysems" and
so rather than -EDQUOT, the intent is to return -ENOSPC when a quota
reservation fails, but this behavior is not consistent.
The only place we make a decision between -EDQUOT and -ENOSPC
returns based on quota type is in xfs_trans_dqresv().
This behavior is currently controlled by whether or not the
XFS_QMOPT_ENOSPC flag gets passed into the quota reservation. However,
its use is not consistent; paths such as xfs_create() and xfs_symlink()
don't set the flag, so a reservation failure will return -EDQUOT for
project quota reservation failures rather than -ENOSPC for these sorts
of operations, even for project quota:
# mkdir mnt/project
# xfs_quota -x -c "project -s -p mnt/project 42" mnt
# xfs_quota -x -c 'limit -p isoft=2 ihard=3 42' mnt
# touch mnt/project/file{1,2,3}
touch: cannot touch ‘mnt/project/file3’: Disk quota exceeded
We can make this consistent by not requiring the flag to be set at the
top of the callchain; instead we can simply test whether we are
reserving a project quota with XFS_QM_ISPDQ in xfs_trans_dqresv and if
so, return -ENOSPC for that failure. This removes the need for the
XFS_QMOPT_ENOSPC altogether and simplifies the code a fair bit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Long ago, group & project quota were mutually exclusive, and so
when we turned on XFS_QMOPT_ENOSPC ("return ENOSPC if project quota
is exceeded") when project quota was enabled, we only needed to
disable it again for user quota.
When group & project quota got separated, this got missed, and as a
result if project quota is enabled and group quota is exceeded, the
error code returned is incorrectly returned as ENOSPC not EDQUOT.
Fix this by stripping XFS_QMOPT_ENOSPC out of flags for group
quota when we try to reserve the space.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It's a global atomic counter, and we are hitting it at a rate of
half a million transactions a second, so it's bouncing the counter
cacheline all over the place on large machines. We don't actually
need it anymore - it used to be required because the VFS freeze code
could not track/prevent filesystem transactions that were running,
but that problem no longer exists.
Hence to remove the counter, we simply have to ensure that nothing
calls xfs_sync_sb() while we are trying to quiesce the filesytem.
That only happens if the log worker is still running when we call
xfs_quiesce_attr(). The log worker is cancelled at the end of
xfs_quiesce_attr() by calling xfs_log_quiesce(), so just call it
early here and then we can remove the counter altogether.
Concurrent create, 50 million inodes, identical 16p/16GB virtual
machines on different physical hosts. Machine A has twice the CPU
cores per socket of machine B:
unpatched patched
machine A: 3m16s 2m00s
machine B: 4m04s 4m05s
Create rates:
unpatched patched
machine A: 282k+/-31k 468k+/-21k
machine B: 231k+/-8k 233k+/-11k
Concurrent rm of same 50 million inodes:
unpatched patched
machine A: 6m42s 2m33s
machine B: 4m47s 4m47s
The transaction rate on the fast machine went from just under
300k/sec to 700k/sec, which indicates just how much of a bottleneck
this atomic counter was.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Seeing massive cpu usage from xfs_agino_range() on one machine;
instruction level profiles look similar to another machine running
the same workload, only one machine is consuming 10x as much CPU as
the other and going much slower. The only real difference between
the two machines is core count per socket. Both are running
identical 16p/16GB virtual machine configurations
Machine A:
25.83% [k] xfs_agino_range
12.68% [k] __xfs_dir3_data_check
6.95% [k] xfs_verify_ino
6.78% [k] xfs_dir2_data_entry_tag_p
3.56% [k] xfs_buf_find
2.31% [k] xfs_verify_dir_ino
2.02% [k] xfs_dabuf_map.constprop.0
1.65% [k] xfs_ag_block_count
And takes around 13 minutes to remove 50 million inodes.
Machine B:
13.90% [k] __pv_queued_spin_lock_slowpath
3.76% [k] do_raw_spin_lock
2.83% [k] xfs_dir3_leaf_check_int
2.75% [k] xfs_agino_range
2.51% [k] __raw_callee_save___pv_queued_spin_unlock
2.18% [k] __xfs_dir3_data_check
2.02% [k] xfs_log_commit_cil
And takes around 5m30s to remove 50 million inodes.
Suspect is cacheline contention on m_sectbb_log which is used in one
of the macros in xfs_agino_range. This is a read-only variable but
shares a cacheline with m_active_trans which is a global atomic that
gets bounced all around the machine.
The workload is trying to run hundreds of thousands of transactions
per second and hence cacheline contention will be occurring on this
atomic counter. Hence xfs_agino_range() is likely just be an
innocent bystander as the cache coherency protocol fights over the
cacheline between CPU cores and sockets.
On machine A, this rearrangement of the struct xfs_mount
results in the profile changing to:
9.77% [kernel] [k] xfs_agino_range
6.27% [kernel] [k] __xfs_dir3_data_check
5.31% [kernel] [k] __pv_queued_spin_lock_slowpath
4.54% [kernel] [k] xfs_buf_find
3.79% [kernel] [k] do_raw_spin_lock
3.39% [kernel] [k] xfs_verify_ino
2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock
Vastly less CPU usage in xfs_agino_range(), but still 3x the amount
of machine B and still runs substantially slower than it should.
Current rm -rf of 50 million files:
vanilla patched
machine A 13m20s 6m42s
machine B 5m30s 5m02s
It's an improvement, hence indicating that separation and further
optimisation of read-only global filesystem data is worthwhile, but
it clearly isn't the underlying issue causing this specific
performance degradation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shaokun Zhang reported that XFS was using substantial CPU time in
percpu_count_sum() when running a single threaded benchmark on
a high CPU count (128p) machine from xfs_mod_ifree(). The issue
is that the filesystem is empty when the benchmark runs, so inode
allocation is running with a very low inode free count.
With the percpu counter batching, this means comparisons when the
counter is less that 128 * 256 = 32768 use the slow path of adding
up all the counters across the CPUs, and this is expensive on high
CPU count machines.
The summing in xfs_mod_ifree() is only used to fire an assert if an
underrun occurs. The error is ignored by the higher level code.
Hence this is really just debug code and we don't need to run it
on production kernels, nor do we need such debug checks to return
error values just to trigger an assert.
Finally, xfs_mod_icount/xfs_mod_ifree are only called from
xfs_trans_unreserve_and_mod_sb(), so get rid of them and just
directly call the percpu_counter_add/percpu_counter_compare
functions. The compare functions are now run only on debug builds as
they are internal to ASSERT() checks and so only compiled in when
ASSERTs are active (CONFIG_XFS_DEBUG=y or CONFIG_XFS_WARN=y).
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()
From: Dave Chinner <dchinner@redhat.com>
The error handling in xfs_trans_unreserve_and_mod_sb() is largely
incorrect - rolling back the changes in the transaction if only one
counter underruns makes all the other counters incorrect. We still
allow the change to proceed and committing the transaction, except
now we have multiple incorrect counters instead of a single
underflow.
Further, we don't actually report the error to the caller, so this
is completely silent except on debug kernels that will assert on
failure before we even get to the rollback code. Hence this error
handling is broken, untested, and largely unnecessary complexity.
Just remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move freeing the dynamically allocated attr and COW fork, as well
as zeroing the pointers where actually needed into the callers, and
just pass the xfs_ifork structure to xfs_idestroy_fork. Also simplify
the kmem_free calls by not checking for NULL first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both the data and attr fork have a format that is stored in the legacy
idinode. Move it into the xfs_ifork structure instead, where it uses
up padding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are there are three extents counters per inode, one for each of
the forks. Two are in the legacy icdinode and one is directly in
struct xfs_inode. Switch to a single counter in the xfs_ifork structure
where it uses up padding at the end of the structure. This simplifies
various bits of code that just wants the number of extents counter and
can now directly dereference it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifree only need to free inline data in the data fork, as we've
already taken care of the attr fork before (and in fact freed the
fork structure). Just open code the freeing of the inline data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just checking di_forkoff directly is a little easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS_IFORK_Q is supposed to be a predicate, not a function returning a
value. Its usage is in xchk_bmap_check_rmaps is incorrect, but that
function only cares about whether or not the "size" of the data is zero
or not. Convert that logic to use a proper boolean, and teach the
caller to skip the call entirely if the end result would be that we'd do
nothing anyway. This avoids a crash later in this series.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[hch: generalized the NULL ifor check]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we fully verify the inode forks before they are added to the
inode cache, the crash reported in
https://bugzilla.kernel.org/show_bug.cgi?id=204031
can't happen anymore, as we'll never let an inode that has inconsistent
nextents counts vs the presence of an in-core attr fork leak into the
inactivate code path. So remove the work around to try to handle the
case, and just return an error and warn if the fork is not present.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We don't call xfs_bmapi_read for the COW fork anymore, so remove the
special casing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Call the data/attr local fork verifiers as soon as we are ready for them.
This keeps them close to the code setting up the forks, and avoids a
few branches later on. Also open code xfs_inode_verify_forks in the
only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The split between xfs_inode_verify_forks and the two helpers
implementing the actual functionality is a little strange. Reshuffle
it so that xfs_inode_verify_forks verifies if the data and attr forks
are actually in local format and only call the low-level helpers if
that is the case. Handle the actual error reporting in the low-level
handlers to streamline the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifork_ops add up to two indirect calls per inode read and flush,
despite just having a single instance in the kernel. In xfsprogs
phase6 in xfs_repair overrides the verify_dir method to deal with inodes
that do not have a valid parent, but that can be fixed pretty easily
by ensuring they always have a valid looking parent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is not much point in the xfs_iread function, as it has a single
caller and not a whole lot of code. Move it into the only caller,
and trim down the overdocumentation to just documenting the important
"why" instead of a lot of redundant "what".
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
i_delayed_blks is set to 0 in xfs_inode_alloc and can't have anything
assigned to it until the inode is visible to the VFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep the code dealing with the dinode together, and also ensure we verify
the dinode in the owner change log recovery case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Handle inodes with a 0 di_mode in xfs_inode_from_disk, instead of partially
duplicating inode reading in xfs_iread.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_iformat_fork is a weird catchall. Split it into one helper for
the data fork and one for the attr fork, and then call both helper
as well as the COW fork initialization from xfs_inode_from_disk. Order
the COW fork initialization after the attr fork initialization given
that it can't fail to simplify the error handling.
Note that the newly split helpers are moved down the file in
xfs_inode_fork.c to avoid the need for forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We always need to fill out the fork structures when reading the inode,
so call xfs_iformat_fork from the tail of xfs_inode_from_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The last argument to xfs_bmapi_raad contains XFS_BMAPI_* flags, not the
fork. Given that XFS_DATA_FORK evaluates to 0 no real harm is done,
but let's fix this anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix this error message to complain about project and group quota flag
bits instead of "PUOTA" and "QUOTA".
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the old SWAPEXT ioctl doesn't know how to adjust quota ids,
bail out of the ids don't match and quotas are enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While QAing the new xfs_repair quotacheck code, I uncovered a quota
corruption bug resulting from a bad interaction between dquot buffer
initialization and quotacheck. The bug can be reproduced with the
following sequence:
# mkfs.xfs -f /dev/sdf
# mount /dev/sdf /opt -o usrquota
# su nobody -s /bin/bash -c 'touch /opt/barf'
# sync
# xfs_quota -x -c 'report -ahi' /opt
User quota on /opt (/dev/sdf)
Inodes
User ID Used Soft Hard Warn/Grace
---------- ---------------------------------
root 3 0 0 00 [------]
nobody 1 0 0 00 [------]
# xfs_io -x -c 'shutdown' /opt
# umount /opt
# mount /dev/sdf /opt -o usrquota
# touch /opt/man2
# xfs_quota -x -c 'report -ahi' /opt
User quota on /opt (/dev/sdf)
Inodes
User ID Used Soft Hard Warn/Grace
---------- ---------------------------------
root 1 0 0 00 [------]
nobody 1 0 0 00 [------]
# umount /opt
Notice how the initial quotacheck set the root dquot icount to 3
(rootino, rbmino, rsumino), but after shutdown -> remount -> recovery,
xfs_quota reports that the root dquot has only 1 icount. We haven't
deleted anything from the filesystem, which means that quota is now
under-counting. This behavior is not limited to icount or the root
dquot, but this is the shortest reproducer.
I traced the cause of this discrepancy to the way that we handle ondisk
dquot updates during quotacheck vs. regular fs activity. Normally, when
we allocate a disk block for a dquot, we log the buffer as a regular
(dquot) buffer. Subsequent updates to the dquots backed by that block
are done via separate dquot log item updates, which means that they
depend on the logged buffer update being written to disk before the
dquot items. Because individual dquots have their own LSN fields, that
initial dquot buffer must always be recovered.
However, the story changes for quotacheck, which can cause dquot block
allocations but persists the final dquot counter values via a delwri
list. Because recovery doesn't gate dquot buffer replay on an LSN, this
means that the initial dquot buffer can be replayed over the (newer)
contents that were delwritten at the end of quotacheck. In effect, this
re-initializes the dquot counters after they've been updated. If the
log does not contain any other dquot items to recover, the obsolete
dquot contents will not be corrected by log recovery.
Because quotacheck uses a transaction to log the setting of the CHKD
flags in the superblock, we skip quotacheck during the second mount
call, which allows the incorrect icount to remain.
Fix this by changing the ondisk dquot initialization function to use
ordered buffers to write out fresh dquot blocks if it detects that we're
running quotacheck. If the system goes down before quotacheck can
complete, the CHKD flags will not be set in the superblock and the next
mount will run quotacheck again, which can fix uninitialized dquot
buffers. This requires amending the defer code to maintaine ordered
buffer state across defer rolls for the sake of the dquot allocation
code.
For regular operations we preserve the current behavior since the dquot
items require properly initialized ondisk dquot records.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The attr fork can transition from shortform to leaf format while
empty if the first xattr doesn't fit in shortform. While this empty
leaf block state is intended to be transient, it is technically not
due to the transactional implementation of the xattr set operation.
We historically have a couple of bandaids to work around this
problem. The first is to hold the buffer after the format conversion
to prevent premature writeback of the empty leaf buffer and the
second is to bypass the xattr count check in the verifier during
recovery. The latter assumes that the xattr set is also in the log
and will be recovered into the buffer soon after the empty leaf
buffer is reconstructed. This is not guaranteed, however.
If the filesystem crashes after the format conversion but before the
xattr set that induced it, only the format conversion may exist in
the log. When recovered, this creates a latent corrupted state on
the inode as any subsequent attempts to read the buffer fail due to
verifier failure. This includes further attempts to set xattrs on
the inode or attempts to destroy the attr fork, which prevents the
inode from ever being removed from the unlinked list.
To avoid this condition, accept that an empty attr leaf block is a
valid state and remove the count check from the verifier. This means
that on rare occasions an attr fork might exist in an unexpected
state, but is otherwise consistent and functional. Note that we
retain the logic to avoid racing with metadata writeback to reduce
the window where this can occur.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch corrects the SPDX License Identifier style in header files
related to XFS File System support. For C header files
Documentation/process/license-rules.rst mandates C-like comments.
(opposed to C source files where C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
DCACHE_DONTCACHE indicates a dentry should not be cached on final
dput().
Also add a helper function to mark DCACHE_DONTCACHE on all dentries
pointing to a specific inode when that inode is being set I_DONTCACHE.
This facilitates dropping dentry references to inodes sooner which
require eviction to swap S_DAX mode.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
DAX effective mode (S_DAX) changes requires inode eviction.
XFS has an advisory flag (XFS_IDONTCACHE) to prevent caching of the
inode if no other additional references are taken. We lift this flag to
the VFS layer and change the behavior slightly by allowing the flag to
remain even if multiple references are taken.
This will expedite the eviction of inodes to change S_DAX.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove duplicate headers which are included twice.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The random buffer write failure errortag patch introduced a local
mount pointer variable for the test macro, but the macro is compiled
out on !DEBUG kernels. This results in an unused variable warning.
Access the mount structure through the buffer pointer and remove the
local mount pointer to address the warning.
Fixes: 7376d74547 ("xfs: random buffer write failure errortag")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove unnecessary includes from the log recovery code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Move the helpers that handle incore buffer cancellation records to
xfs_buf_item_recover.c since they're not directly related to the main
log recovery machinery. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only purpose of XFS_LI_RECOVERED is to prevent log recovery from
trying to replay recovered intents more than once. Therefore, we can
move the bit setting up to the ->iop_recover caller.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've made the recovered item tests all the same, we can hoist
the test and the ail locking code to the ->iop_recover caller and call
the recovery function directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename XFS_{EFI,BUI,RUI,CUI}_RECOVERED to XFS_LI_RECOVERED so that we
track recovery status in the log item, then get rid of the now unused
flags fields in each of those log item types.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During recovery, every intent that we recover from the log has to be
added to the AIL. Replace the open-coded addition with a helper.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Replace the open-coded AIL item walking with a proper helper when we're
trying to release an intent item that has been finished. We add a new
->iop_match method to decide if an intent item matches a supplied ID.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've finished converting all types of log intent items to
provide an ->iop_recover function, we can convert the "is this an intent
item?" predicate to look for a non-null iop_recover pointer.
Move the predicate closer to the functions that use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Quotaoff doesn't actually do anything, so take advantage of the
commit_pass2 pointer being optional and get rid of the switch
statement clause.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the bmap update intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the refcount update intent and intent-done pass2 commit code into
the per-item source code files and use dispatch functions to call them.
We do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the rmap update intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the extent free intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log icreate item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log dquot item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log inode item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log buffer item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the pass1 commit code into the per-item source code files and use
the dispatch function to call them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the pass2 readhead code into the per-item source code files and use
the dispatch function to call them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a generic dispatch structure to delegate recovery of different
log item types into various code modules. This will enable us to move
code specific to a particular log item type out of xfs_log_recover.c and
into the log item source.
The first operation we virtualize is the log item sorting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove the old typedefs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and
fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both types control shutdown messaging and neither is used in the
current codebase.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce an error tag to randomly fail async buffer writes. This is
primarily to facilitate testing of the XFS error configuration
mechanism.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The stale parameter was used to control the now unused shutdown
parameter of xfs_trans_ail_remove().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the functions and callers of
xfs_trans_ail_[remove|delete]() have been fixed up appropriately,
the only difference between the two is the shutdown behavior. There
are only a few callers of the _remove() variant, so make the
shutdown conditional on the parameter and combine the two functions.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The shutdown parameter of xfs_trans_ail_remove() is no longer used.
The remaining callers use it for items that legitimately might not
be in the AIL or from contexts where AIL state has already been
checked. Remove the unnecessary parameter and fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Various intent log items call xfs_trans_ail_remove() with a log I/O
error shutdown type, but this helper historically checks whether an
item is in the AIL before calling xfs_trans_ail_delete(). This means
the shutdown check is essentially a no-op for users of
xfs_trans_ail_remove().
It is possible that some items might not be AIL resident when the
AIL remove attempt occurs, but this should be isolated to cases
where the filesystem has already shutdown. For example, this
includes abort of the transaction committing the intent and I/O
error of the iclog buffer committing the intent to the log.
Therefore, update these callsites to use xfs_trans_ail_delete() to
provide AIL state validation for the common path of items being
released and removed when associated done items commit to the
physical log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Several callers acquire the lock just prior to the call. Callers
that require ->ail_lock for other purposes already check IN_AIL
state and thus don't require the additional shutdown check in the
helper. Push the lock down into xfs_trans_ail_delete(), open code
the instances that still acquire it, and remove the unnecessary ailp
parameter.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dquot flush handler effectively aborts the dquot flush if the
filesystem is already shut down, but doesn't actually shut down if
the flush fails. Update xfs_qm_dqflush() to consistently abort the
dquot flush and shutdown the fs if the flush fails with an
unexpected error.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The pre-flush dquot verification in xfs_qm_dqflush() duplicates the
read verifier by checking the dquot in the on-disk buffer. Instead,
verify the in-core variant before it is flushed to the buffer.
Fixes: 7224fa482a ("xfs: add full xfs_dqblk verifier")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At unmount time, XFS emits an alert for every in-core buffer that
might have undergone a write error. In practice this behavior is
probably reasonable given that the filesystem is likely short lived
once I/O errors begin to occur consistently. Under certain test or
otherwise expected error conditions, this can spam the logs and slow
down the unmount.
Now that we have a ratelimit mechanism specifically for buffer
alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg().
Also lift the final repair message out of the loop so it always
prints and assert that the metadata error handling code has shut
down the fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS has some inconsistent log message rate limiting with respect to
buffer alerts. The metadata I/O error notification uses the generic
ratelimited alert, the buffer push code uses a custom rate limit and
the similar quiesce time failure checks are not rate limited at all
(when they should be).
The custom rate limit defined in the buf item code is specifically
crafted for buffer alerts. It is more aggressive than generic rate
limiting code because it must accommodate a high frequency of I/O
error events in a relative short timeframe.
Factor out the custom rate limit state from the buf item code into a
per-buftarg rate limit so various alerts are limited based on the
target. Define a buffer alert helper function and use it for the
buffer alerts that are already ratelimited.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer write failure flag is intended to control the internal
write retry that XFS has historically implemented to help mitigate
the severity of transient I/O errors. The flag is set when a buffer
is resubmitted from the I/O completion path due to a previous
failure. It is checked on subsequent I/O completions to skip the
internal retry and fall through to the higher level configurable
error handling mechanism. The flag is cleared in the synchronous and
delwri submission paths and also checked in various places to log
write failure messages.
There are a couple minor problems with the current usage of this
flag. One is that we issue an internal retry after every submission
from xfsaild due to how delwri submission clears the flag. This
results in double the expected or configured number of write
attempts when under sustained failures. Another more subtle issue is
that the flag is never cleared on successful I/O completion. This
can cause xfs_wait_buftarg() to suggest that dirty buffers are being
thrown away due to the existence of the flag, when the reality is
that the flag might still be set because the write succeeded on the
retry.
Clear the write failure flag on successful I/O completion to address
both of these problems. This means that the internal retry attempt
occurs once since the last time a buffer write failed and that
various other contexts only see the flag set when the immediately
previous write attempt has failed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The shutdown check in xfs_iflush() duplicates checks down in the
buffer code. If the fs is shut down, xfs_trans_read_buf_map() always
returns an error and falls into the same error path. Remove the
unnecessary check along with the warning in xfs_imap_to_bp()
that generates excessive noise in the log if the fs is shut down.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode flush code has several layers of error handling between
the inode and cluster flushing code. If the inode flush fails before
acquiring the backing buffer, the inode flush is aborted. If the
cluster flush fails, the current inode flush is aborted and the
cluster buffer is failed to handle the initial inode and any others
that might have been attached before the error.
Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the
error handling between the two can be condensed in the top-level
function. If we update xfs_iflush_int() to always fall through to
the log item update and attach the item completion handler to the
buffer, any errors that occur after the first call to
xfs_iflush_int() can be handled with a buffer I/O failure.
Lift the error handling from xfs_iflush_cluster() into xfs_iflush()
and consolidate with the existing error handling. This also replaces
the need to release the buffer because failing the buffer with
XBF_ASYNC drops the current reference.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We use the same buffer I/O failure code in a few different places.
It's not much code, but it's not necessarily self-explanatory.
Factor it into a helper and document it in one place.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Flush locked log items whose underlying buffers fail metadata
writeback are tagged with a special flag to indicate that the flush
lock is already held. This is currently implemented in the type
specific ->iop_push() callback, but the processing required for such
items is not type specific because we're only doing basic state
management on the underlying buffer.
Factor the failed log item handling out of the inode and dquot
->iop_push() callbacks and open code the buffer resubmit helper into
a single helper called from xfsaild_push_item(). This provides a
generic mechanism for handling failed metadata buffer writeback with
a bit less code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.
Fixes: 96987eea53 ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The functionality in xfs_diflags_to_linux() and xfs_diflags_to_iflags() are
nearly identical. The only difference is that *_to_linux() is called after
inode setup and disallows changing the DAX flag.
Combining them can be done with a flag which indicates if this is the initial
setup to allow the DAX flag to be properly set only at init time.
So remove xfs_diflags_to_linux() and call the modified xfs_diflags_to_iflags()
directly.
While we are here simplify xfs_diflags_to_iflags() to take struct xfs_inode and
use xfs_ip2xflags() to ensure future diflags are included correctly.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_inode_supports_dax() should reflect if the inode can support DAX not
that it is enabled for DAX.
Change the use of xfs_inode_supports_dax() to reflect only if the inode
and underlying storage support dax.
Add a new function xfs_inode_should_enable_dax() which reflects if the
inode should be enabled for DAX.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
As agreed upon[1]. We make the dax mount option a tri-state. '-o dax'
continues to operate the same. We add 'always', 'never', and 'inode'
(default).
[1] https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In prep for the new tri-state mount option which then introduces
XFS_MOUNT_DAX_NEVER.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
An earlier call of xfs_reinit_inode() from xfs_iget_cache_hit() already
handles initialization of i_rwsem.
Doing so again is unneeded.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Given how XFS is all based around btrees it doesn't make much sense
to offer a totally generic state when we can just use the btree cursor.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All defer op instance place their own extension of the log item into
the dfp_done field. Replace that with a xfs_log_item to improve type
safety and make the code easier to follow.
Also use the opportunity to improve the ->finish_item calling conventions
to place the done log item as the higher level structure before the
list_entry used for the individual items.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a helper that operates on a single xfs_defer_pending structure
to untangle the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All defer op instance place their own extension of the log item into
the dfp_intent field. Replace that with a xfs_log_item to improve type
safety and make the code easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This avoids a per-item indirect call, and also simplifies the interface
a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
These are aways called together, and my merging them we reduce the amount
of indirect calls, improve type safety and in general clean up the code
a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a helper that encapsulates the whole logic to create a defer
intent. This reorders some of the work that was done, but none of
that has an affect on the operation as only fields that don't directly
interact are affected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a xlog_add_buffer_cancelled helper which does the low-level
manipulation of the buffer cancelation table, and in that helper call
xlog_find_buffer_cancelled instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Don't bother to allocate memory and convert the log item when we
only need the block number and the length. Just extract them directly
and call xlog_buf_readahead separately in each branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a little helper to readahead a buffer if it hasn't been cancelled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This list contains pretty much everything that is not a buffer. The
comment calls it item_list, which is a much better name than inode
list, so switch the actual variable name to that as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the somewhat convoluted use of xlog_peek_buffer_cancelled and
xlog_check_buffer_cancelled with two obvious helpers:
xlog_is_buffer_cancelled, which returns true if there is a buffer in
the cancellation table, and
xlog_put_buffer_cancelled, which also decrements the reference count
of the buffer cancellation table.
Both share a little helper to look up the entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are a couple places where we directly call printk_once() and one
of them doesn't follow the standard xfs subsystem printk format as a
result.
#define printk_once variants to go with our existing printk_ratelimited
#defines so we can do one-shot printks in a consistent manner.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
I ran into a linker warning in XFS that originates from a mismatch
between libelf, binutils and objtool when certain files in the kernel
are built with "gcc -g":
x86_64-linux-ld: fs/xfs/xfs_trace.o: unable to initialize decompress status for section .debug_info
After some discussion, nobody could identify why xfs sets this flag
here. CONFIG_XFS_DEBUG used to enable lots of unrelated settings, but
now its main purpose is to enable extra consistency checks and assertions
that are unrelated to the debug info.
Remove the Makefile logic to set the flag here. If anyone relies
on the debug info, this can simply be enabled again with the global
CONFIG_DEBUG_INFO option.
Dave Chinner writes:
I'm pretty sure it was needed for the original kgdb integration back
in the early 2000s. That was when SGI used to patch their XFS dev
tree with kgdb and debug symbols were needed by the custom kgdb
modules that were ported across from the Irix kernel debugger.
ISTR that the early kcrash kernel dump analysis tools (again,
originated from the Irix "icrash" kernel dump tools) had custom XFS
debug scripts that needed also the debug info to work correctly...
Which is a long way of saying "we don't need it anymore" instead of
"nobody knows why it was set"... :)
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20200409074130.GD21033@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations has been removed, the resblks
value should be larger than zero, so remove the unnecessary check.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the setting of the flags value, and only consider
quota enforcement stuff here.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The check XFS_IS_QUOTA_RUNNING() has been done when enter the
xfs_qm_vop_create_dqattach() function, it will return directly
if the result is false, so the followed XFS_IS_QUOTA_RUNNING()
assertion is unnecessary. If we truly care about this, the check
also can be added to the condition of next if statements.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The initial value of variable udqp is NULL, and we only set the
flag XFS_QMOPT_PQUOTA in xfs_qm_vop_dqalloc() function, so only
the pdqp value is initialized and the udqp value is still NULL.
Since the udqp value is NULL in the rest part of xfs_ioctl_setattr()
function, it is meaningless and do nothing. So remove it from
xfs_ioctl_setattr().
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We share an inode between gquota and pquota with the older
superblock that doesn't have separate pquotino, and for the
need_alloc == false case we don't need to call xfs_dir_ialloc()
function, so add the check if reserved free disk blocks is
needed.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The two if statements have same condition, and the mask value
does not change in xfs_setattr_nonsize(), so combine them.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The trace event xfs_dquot_dqalloc does not depend on the
value uq, so remove the condition, and trace quota allocations
for all quota types.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're sorting recovered log items ahead of recovering them and
encounter a log item of unknown type, actually print the type code when
we're rejecting the whole transaction to aid in debugging.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler
methods to take kernel pointers instead. It gets rid of the set_fs address
space overrides used by BPF. As per discussion, pull in the feature branch
into bpf-next as it relates to BPF sysctl progs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the inode dirty data flushing to a workqueue so that multiple
threads can take advantage of a single thread's flushing work. The
ratelimiting technique used in bdd4ee4 was not successful, because
threads that skipped the inode flush scan due to ratelimiting would
ENOSPC early, which caused occasional (but noticeable) changes in
behavior and sporadic fstest regressions.
Therefore, make all the writer threads wait on a single inode flush,
which eliminates both the stampeding hordes of flushers and the small
window in which a write could fail with ENOSPC because it lost the
ratelimit race after even another thread freed space.
Fixes: c6425702f2 ("xfs: ratelimit inode flush on buffered write ENOSPC")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized. Specifically, br_state was not
being copied from the passed-in struct to the uirec. This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.
Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.
Fixes: d6b636ebb1 ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: Paul Furtado <paulfurtado91@gmail.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reflink should force the log out to disk if the filesystem was mounted
with wsync, the same as most other operations in xfs.
[Note: XFS_MOUNT_WSYNC is set when the admin mounts the filesystem
with either the 'wsync' or 'sync' mount options, which effectively means
that we're classifying reflink/dedupe as IO operations and making them
synchronous when required.]
Fixes: 3fc9f5e409 ("xfs: remove xfs_reflink_remap_range")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
[darrick: add more to the changelog]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a new helper to force the log up to the last LSN touching an
inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Qian Cai reports seemingly random buffer read verifier errors during
filesystem writeback. This was isolated to a recent patch that
factored out some inode cluster freeing code and happened to cast an
unsigned inode number type to a signed value. If the inode number
value overflows, we can skip marking in-core inodes associated with
the underlying buffer stale at the time the physical inodes are
freed. If such an inode happens to be dirty, xfsaild will eventually
attempt to write it back over non-inode blocks. The invalidation of
the underlying inode buffer causes writeback to read the buffer from
disk. This fails the read verifier (preventing eventual corruption)
if the buffer no longer looks like an inode cluster. Analysis by
Dave Chinner.
Fix up the helper to use the proper type for inode number values.
Fixes: 5806165a66 ("xfs: factor inode lookup from xfs_ifree_cluster")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The variables 'udqp' and 'gdqp' have been initialized, so remove
redundant variable assignment in xfs_symlink().
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A customer reported rcu stalls and softlockup warnings on a computer
with many CPU cores and many many more IO threads trying to write to a
filesystem that is totally out of space. Subsequent analysis pointed to
the many many IO threads calling xfs_flush_inodes -> sync_inodes_sb,
which causes a lot of wb_writeback_work to be queued. The writeback
worker spends so much time trying to wake the many many threads waiting
for writeback completion that it trips the softlockup detector, and (in
this case) the system automatically reboots.
In addition, they complain that the lengthy xfs_flush_inodes scan traps
all of those threads in uninterruptible sleep, which hampers their
ability to kill the program or do anything else to escape the situation.
If there's thousands of threads trying to write to files on a full
filesystem, each of those threads will start separate copies of the
inode flush scan. This is kind of pointless since we only need one
scan, so rate limit the inode flush.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If the inode buffer backing a particular inode is locked,
xfs_iflush() returns -EAGAIN and xfs_inode_item_push() skips the
inode. It still returns success to xfsaild, however, which bypasses
the xfsaild backoff heuristic. Update xfs_inode_item_push() to
return locked status if the inode buffer couldn't be locked.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A dquot flush currently blocks on the buffer lock for the underlying
dquot buffer. In turn, this causes xfsaild to block rather than
continue processing other items in the meantime. Update
xfs_qm_dqflush() to trylock the buffer, similar to how inode buffers
are handled, and return -EAGAIN if the lock fails. Fix up any
callers that don't currently handle the error properly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations for file creations has
been removed, the resblks value should be larger than zero, so
remove unnecessary ternary conditional.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: s/judgment/ternary/]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit f467cad95f, I added the ability to force a recalculation of
the filesystem summary counters if they seemed incorrect. This was done
(not entirely correctly) by tweaking the log code to write an unmount
record without the UMOUNT_TRANS flag set. At next mount, the log
recovery code will fail to find the unmount record and go into recovery,
which triggers the recalculation.
What actually gets written to the log is what ought to be an unmount
record, but without any flags set to indicate what kind of record it
actually is. This worked to trigger the recalculation, but we shouldn't
write bogus log records when we could simply write nothing.
Fixes: f467cad95f ("xfs: force summary counter recalc at next mount")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's lots of indent in this code which makes it a bit hard to
follow. We are also going to completely rework the inode lookup code
as part of the inode reclaim rework, so factor out the inode lookup
code from the inode cluster freeing code.
Based on prototype code from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We currently wake anything waiting on the log tail to move whenever
the log item at the tail of the log is removed. Historically this
was fine behaviour because there were very few items at any given
LSN. But with delayed logging, there may be thousands of items at
any given LSN, and we can't move the tail until they are all gone.
Hence if we are removing them in near tail-first order, we might be
waking up processes waiting on the tail LSN to change (e.g. log
space waiters) repeatedly without them being able to make progress.
This also occurs with the new sync push waiters, and can result in
thousands of spurious wakeups every second when under heavy direct
reclaim pressure.
To fix this, check that the tail LSN has actually changed on the
AIL before triggering wakeups. This will reduce the number of
spurious wakeups when doing bulk AIL removal and make this code much
more efficient.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor the common AIL deletion code that does all the wakeups into a
helper so we only have one copy of this somewhat tricky code to
interface with all the wakeups necessary when the LSN of the log
tail changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The XFS inode item slab actually reclaimed by inode shrinker
callbacks from the memory reclaim subsystem. These should be marked
as reclaimable so the mm subsystem has the full picture of how much
memory it can actually reclaim from the XFS slab caches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer cache shrinker frees more than just the xfs_buf slab
objects - it also frees the pages attached to the buffers. Make sure
the memory reclaim code accounts for this memory being freed
correctly, similar to how the inode shrinker accounts for pages
freed from the page cache due to mapping invalidation.
We also need to make sure that the mm subsystem knows these are
reclaimable objects. We provide the memory reclaim subsystem with a
a shrinker to reclaim xfs_bufs, so we should really mark the slab
that way.
We also have a lot of xfs_bufs in a busy system, spread them around
like we do inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Running metadata intensive workloads, I've been seeing the AIL
pushing getting stuck on pinned buffers and triggering log forces.
The log force is taking a long time to run because the log IO is
getting throttled by wbt_wait() - the block layer writeback
throttle. It's being throttled because there is a huge amount of
metadata writeback going on which is filling the request queue.
IOWs, we have a priority inversion problem here.
Mark the log IO bios with REQ_IDLE so they don't get throttled
by the block layer writeback throttle. When we are forcing the CIL,
we are likely to need to to tens of log IOs, and they are issued as
fast as they can be build and IO completed. Hence REQ_IDLE is
appropriate - it's an indication that more IO will follow shortly.
And because we also set REQ_SYNC, the writeback throttle will now
treat log IO the same way it treats direct IO writes - it will not
throttle them at all. Hence we solve the priority inversion problem
caused by the writeback throttle being unable to distinguish between
high priority log IO and background metadata writeback.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In certain situations the background CIL push can be indefinitely
delayed. While we have workarounds from the obvious cases now, it
doesn't solve the underlying issue. This issue is that there is no
upper limit on the CIL where we will either force or wait for
a background push to start, hence allowing the CIL to grow without
bound until it consumes all log space.
To fix this, add a new wait queue to the CIL which allows background
pushes to wait for the CIL context to be switched out. This happens
when the push starts, so it will allow us to block incoming
transaction commit completion until the push has started. This will
only affect processes that are running modifications, and only when
the CIL threshold has been significantly overrun.
This has no apparent impact on performance, and doesn't even trigger
until over 45 million inodes had been created in a 16-way fsmark
test on a 2GB log. That was limiting at 64MB of log space used, so
the active CIL size is only about 3% of the total log in that case.
The concurrent removal of those files did not trigger the background
sleep at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current CIL size aggregation limit is 1/8th the log size. This
means for large logs we might be aggregating at least 250MB of dirty objects
in memory before the CIL is flushed to the journal. With CIL shadow
buffers sitting around, this means the CIL is often consuming >500MB
of temporary memory that is all allocated under GFP_NOFS conditions.
Flushing the CIL can take some time to do if there is other IO
ongoing, and can introduce substantial log force latency by itself.
It also pins the memory until the objects are in the AIL and can be
written back and reclaimed by shrinkers. Hence this threshold also
tends to determine the minimum amount of memory XFS can operate in
under heavy modification without triggering the OOM killer.
Modify the CIL space limit to prevent such huge amounts of pinned
metadata from aggregating. We can have 2MB of log IO in flight at
once, so limit aggregation to 16x this size. This threshold was
chosen as it little impact on performance (on 16-way fsmark) or log
traffic but pins a lot less memory on large logs especially under
heavy memory pressure. An aggregation limit of 8x had 5-10%
performance degradation and a 50% increase in log throughput for
the same workload, so clearly that was too small for highly
concurrent workloads on large logs.
This was found via trace analysis of AIL behaviour. e.g. insertion
from a single CIL flush:
xfs_ail_insert: old lsn 0/0 new lsn 1/3033090 type XFS_LI_INODE flags IN_AIL
$ grep xfs_ail_insert /mnt/scratch/s.t |grep "new lsn 1/3033090" |wc -l
1721823
$
So there were 1.7 million objects inserted into the AIL from this
CIL checkpoint, the first at 2323.392108, the last at 2325.667566 which
was the end of the trace (i.e. it hadn't finished). Clearly a major
problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Separate out the unmount record writing from the rest of the
ticket and log state futzing necessary to make it work. This is
a no-op, just makes the code cleaner and places the unmount record
formatting and writing alongside the commit record formatting and
writing code.
We can also get rid of the ticket flag clearing before the
xlog_write() call because it no longer cares about the state of
XLOG_TIC_INITED.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_write_done() is just a thin wrapper around xlog_commit_record(), so
they can be merged together easily.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove xlog_ticket_done and just call the renamed low-level helpers for
ungranting or regranting log space directly. To make that a little
the reference put on the ticket and all tracing is moved into the actual
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It is not longer used or checked by anything, so remove the last
traces from the log ticket code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_log_done() does two separate things. Firstly, it triggers commit
records to be written for permanent transactions, and secondly it
releases or regrants transaction reservation space.
Since delayed logging was introduced, transactions no longer write
directly to the log, hence they never have the XLOG_TIC_INITED flag
cleared on them. Hence transactions never write commit records to
the log and only need to modify reservation space.
Split up xfs_log_done into two parts, and only call the parts of the
operation needed for the context xfs_log_done() is currently being
called from.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit and unmount records records do not need start records to be
written, so rearrange the logic in xlog_write() to remove the need
to check for XLOG_TIC_INITED to determine if we should account for
the space used by a start record.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xlog_write() function iterates over iclogs until it completes
writing all the log vectors passed in. The ticket tracks whether
a start record has been written or not, so only the first iclog gets
a start record. We only ever pass single use tickets to
xlog_write() so we only ever need to write a start record once per
xlog_write() call.
Hence we don't need to store whether we should write a start record
in the ticket as the callers provide all the information we need to
determine if a start record should be written. For the moment, we
have to ensure that we clear the XLOG_TIC_INITED appropriately so
the code in xfs_log_done() still works correctly for committing
transactions.
(darrick: Note the slight behavior change that we always deduct the
size of the op header from the ticket, even for unmount records)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: pass an explicit need_start_rec argument]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Validate the geometry of the realtime geometry when we mount the
filesystem, so that we don't abruptly shut down the filesystem later on.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
I noticed that fsfreeze can take a very long time to freeze an XFS if
there happens to be a GETFSMAP caller running in the background. I also
happened to notice the following in dmesg:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs]
Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs]
CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs]
Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54
RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff
RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8
FS: 00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0
Call Trace:
xfs_fs_freeze+0x25/0x40 [xfs]
freeze_super+0xc8/0x180
do_vfs_ioctl+0x70b/0x750
? __fget_files+0x135/0x210
ksys_ioctl+0x3a/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
These two things appear to be related. The assertion trips when another
thread initiates a fsmap request (which uses an empty transaction) after
the freezer waited for m_active_trans to hit zero but before the the
freezer executes the WARN_ON just prior to calling xfs_log_quiesce.
The lengthy delays in freezing happen because the freezer calls
xfs_wait_buftarg to clean out the buffer lru list. Meanwhile, the
GETFSMAP caller is continuing to grab and release buffers, which means
that it can take a very long time for the buffer lru list to empty out.
We fix both of these races by calling sb_start_write to obtain freeze
protection while using empty transactions for GETFSMAP and for metadata
scrubbing. The other two users occur during mount, during which time we
cannot fs freeze.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If the bio_add_page() call fails, we proceed to write out a
partially constructed log buffer. This corrupts the physical log
such that log recovery is not possible. Worse, persistent
occurrences of this error eventually lead to a BUG_ON() failure in
bio_split() as iclogs wrap the end of the physical log, which
triggers log recovery on subsequent mount.
Rather than warn about writing out a corrupted log buffer, shutdown
the fs as is done for any log I/O related error. This preserves the
consistency of the physical log such that log recovery succeeds on a
subsequent mount. Note that this was observed on a 64k page debug
kernel without upstream commit 59bb47985c ("mm, sl[aou]b:
guarantee natural alignment for kmalloc(power-of-two)"), which
demonstrated frequent iclog bio overflows due to unaligned (slab
allocated) iclog data buffers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're checking bestfree information in directory blocks, always
drop the block buffer at the end of the function. We should always
release resources when we're done using them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The dirattr btree checking code uses the altpath substructure of the
dirattr state structure to check the sibling pointers of dir/attr tree
blocks. At the end of sibling checks, xfs_da3_path_shift could have
changed multiple levels of buffer pointers in the altpath structure.
Although we release the leaf level buffer, this isn't enough -- we also
need to release the node buffers that are unique to the altpath.
Not releasing all of the altpath buffers leaves them locked to the
transaction. This is suboptimal because we should release resources
when we don't need them anymore. Fix the function to loop all levels of
the altpath, and fix the return logic so that we always run the loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When quotacheck runs, it zeroes all the timer fields in every dquot.
Unfortunately, it also does this to the root dquot, which erases any
preconfigured grace intervals and warning limits that the administrator
may have set. Worse yet, the incore copies of those variables remain
set. This cache coherence problem manifests itself as the grace
interval mysteriously being reset back to the defaults at the /next/
mount.
Fix it by not resetting the root disk dquot's timer and warning fields.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Open code the xlog_state_want_sync logic in its two callers given that
this function is a trivial wrapper around xlog_state_switch_iclogs.
Move the lockdep assert into xlog_state_switch_iclogs to not lose this
debugging aid, and improve the comment that documents
xlog_state_switch_iclogs as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the shutdown flag in the log to bypass xlog_state_clean_iclog
entirely in case of a shut down log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor out a few self-contained helpers from xlog_state_clean_iclog, and
update the documentation so it primarily documents why things happens
instead of how.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We can just check for a shut down log all the way down in
xlog_cil_committed instead of passing the parameter. This means a
slight behavior change in that we now also abort log items if the
shutdown came in halfway into the I/O completion processing, which
actually is the right thing to do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no need to check for the ioerror state before the lock, as
the shutdown case is not a fast path. Also remove the call to force
shutdown the file system, as it must have been shut down already
for an iclog to be in the ioerror state. Also clean up the flow of
the function a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only caller of xfs_log_release_iclog doesn't care about the return
value, so remove it. Also don't bother passing the mount pointer,
given that we can trivially derive it from the iclog.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor out the shared code to wait for a log force into a new helper.
This helper uses the XLOG_FORCED_SHUTDOWN check previous only used
by the unmount code over the equivalent iclog ioerror state used by
the other two functions.
There is a slight behavior change in that the force of the unmount
record is now accounted in the log force statistics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_cil_push is only called by xlog_cil_push_work, so merge the two
functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We know the version is 3 if on a v5 file system. For earlier file
systems formats we always upgrade the remaining v1 inodes to v2 and
thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode
helper to check if we deal with small or large dinodes, and thus
remove the need for the di_version field in struct icdinode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Only v5 file systems can have the reflink feature, and those will
always use the large dinode format. Remove the extra check for the
inode version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
di_flags2 is initialized to zero for v4 and earlier file systems. This
means di_flags2 can only be non-zero for a v5 file systems, in which
case both the parent and child inodes can store the field. Remove the
extra di_version check, and also remove the rather pointless local
di_flags2 variable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The size of the dinode structure is only dependent on the file system
version, so instead of checking the individual inode version just use
the newly added xfs_sb_version_has_large_dinode helper, and simplify
various calling conventions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a new wrapper to check if a file system supports the v3 inode format
with a larger dinode core. Previously we used xfs_sb_version_hascrc for
that, which is technically correct but a little confusing to read.
Also move xfs_dinode_good_version next to xfs_sb_version_has_v3inode
so that we have one place that documents the superblock version to
inode version relationship.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
AIL removal of the quotaoff start intent and free of both quotaoff
intents is currently limited to the ->iop_committed() handler of the
end intent. This executes when the end intent is committed to the
on-disk log and marks the completion of the operation. The problem
with this is it assumes the success of the operation. If a shutdown
or other error occurs during the quotaoff, it's possible for the
quotaoff task to exit without removing the start intent from the
AIL. This results in an unmount hang as the AIL cannot be emptied.
Further, no other codepath frees the intents and so this is also a
memory leak vector.
First, update the high level quotaoff error path to directly remove
and free the quotaoff start intent if it still exists in the AIL at
the time of the error. Next, update both of the start and end
quotaoff intents with an ->iop_release() callback to properly handle
transaction abort.
This means that If the quotaoff start transaction aborts, it frees
the start intent in the transaction commit path. If the filesystem
shuts down before the end transaction allocates, the quotaoff
sequence removes and frees the start intent. If the end transaction
aborts, it removes the start intent and frees both. This ensures
that a shutdown does not result in a hung unmount and that memory is
not leaked regardless of when a quotaoff error occurs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
AIL removal of the quotaoff start intent and free of both intents is
hardcoded to the ->iop_committed() handler of the end intent. Factor
out the start intent handling code so it can be used in a future
patch to properly handle quotaoff errors. Use xfs_trans_ail_remove()
instead of the _delete() variant to acquire the AIL lock and also
handle cases where an intent might not reside in the AIL at the
time of a failure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add support for btree staging cursors for the rmap btrees. This is
needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the refcount btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the inode btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the free space btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a new btree function that enables us to bulk load a btree cursor.
This will be used by the upcoming online repair patches to generate new
btrees. This avoids the programmatic inefficiency of calling
xfs_btree_insert in a loop (which generates a lot of log traffic) in
favor of stamping out new btree blocks with ordered buffers, and then
committing both the new root and scheduling the removal of the old btree
blocks in a single transaction commit.
The design of this new generic code is based off the btree rebuilding
code in xfs_repair's phase 5 code, with the explicit goal of enabling us
to share that code between scrub and repair. It has the additional
feature of being able to control btree block loading factors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create an in-core fake root for inode-rooted btree types so that callers
can generate a whole new btree using the upcoming btree bulk load
function without making the new tree accessible from the rest of the
filesystem. It is up to the individual btree type to provide a function
to create a staged cursor (presumably with the appropriate callouts to
update the fakeroot) and then commit the staged root back into the
filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create an in-core fake root for AG-rooted btree types so that callers
can generate a whole new btree using the upcoming btree bulk load
function without making the new tree accessible from the rest of the
filesystem. It is up to the individual btree type to provide a function
to create a staged cursor (presumably with the appropriate callouts to
update the fakeroot) and then commit the staged root back into the
filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a xbitmap_hweight helper function so that we can get rid of the
open-coded loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten the name of xfs_bitmap to xbitmap since the scrub bitmap has
nothing to do with the libxfs bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Remove the xfs_bitmap_destroy call from the end of xrep_reap_extents
because this sort of violates our rule that the function initializing a
structure should destroy it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When I lifted the code in xfs_alloc_ag_vextent_lastblock out of a loop,
I forgot to convert all the accesses to len to be pointer dereferences.
Coverity-id: 1457918
Fixes: 5113f8ec37 ("xfs: clean up weird while loop in xfs_alloc_ag_vextent_near")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If the xfs_buf_map array allocation in xfs_dabuf_map fails for whatever
reason, we bail out with error code zero. This will confuse callers, so
make sure that we return ENOMEM. Allocation failure should never happen
with the small size of the array, but code defensively anyway.
Fixes: 45feef8f50 ("xfs: refactor xfs_dabuf_map")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Move the code for verifying the iclog state on a clean unmount into a
helper, and instead of checking the iclog state just rely on the shutdown
check as they are equivalent. Also remove the ifdef DEBUG as the
compiler is smart enough to eliminate the dead code for non-debug builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When the log is shut down all iclogs are in the XLOG_STATE_IOERROR state,
which means that xlog_state_want_sync and xlog_state_release_iclog are
no-ops. Remove the whole section of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the ignored return value from xfs_log_unmount_write, and also
remove a rather pointless assert on the return value from xfs_log_force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A shutdown log is a slow failure path. Add an unlikely annotation to
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This is much less widely used than the bc_private union was, so this
is done as a single patch. The named union xfs_btree_cur_private
goes away and is embedded into the struct xfs_btree_cur_ag as an
anonymous union, and the code is modified via this script:
$ sed -i 's/priv\.\([abt|refc]\)/\1/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
we need to name the btree cursor private structures to be able
to pull them out of the deeply nested structure definition they are
in now.
Based on code extracted from a patchset by Darrick Wong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Rename the union and it's internal structures to the new name and
remove the temporary defines that facilitated the change.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
BPRV is not longer appropriate because bc_private is going away.
Script:
$ sed -i 's/BTCUR_BPRV/BTCUR_BMBT/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
With manual cleanup to the definitions in fs/xfs/libxfs/xfs_btree.h
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: change "BC_BT" to "BTCUR_BMBT", fix subject line typo]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
bc_private.b -> bc_ino conversion via script:
$ sed -i 's/bc_private\.b/bc_ino/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
And then revert the change to the bc_ino #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: tweak the subject line slightly]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
bc_private.a -> bc_ag conversion via script:
`sed -i 's/bc_private\.a/bc_ag/g' fs/xfs/*[ch] fs/xfs/*/*[ch]`
And then revert the change to the bc_ag #define in
fs/xfs/libxfs/xfs_btree.h manually.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Just the defines of the new names - the conversion will be in
scripted commits after this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: change "bc_bt" to "bc_ino"]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Commit 263dde869b ("xfs: cleanup xfs_dir2_block_getdents") introduced
a getdents regression, when it converted the pointer arithmetics to
offset calculations: offset is updated in the loop already for the next
iteration, but the updated offset value is used incorrectly in two
places, where we should have used the not-yet-updated value.
This caused for example "git clean -ffdx" failures to cleanup certain
directory structures when running in a container.
Fix the regression by making sure we use proper offset in the loop body.
Thanks to Christoph Hellwig for suggestion how to best fix the code.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 263dde869b ("xfs: cleanup xfs_dir2_block_getdents")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xchk_xattr_listent, we attempt to validate the extended attribute
hash structures by performing a attr lookup by (hashed) name. If the
lookup returns ENODATA, that means that the hash information is corrupt.
The _process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name. If the lookup
returns ENOENT, that means that the hash information is corrupt. The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the owner field of dir3 block headers. If it's corrupt, release
the buffer and return EFSCORRUPTED. All callers handle this properly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the owner field of dir3 data block headers. If it's corrupt,
release the buffer and return EFSCORRUPTED. All callers handle this
properly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the owner field of dir3 free block headers and reject the metadata
if there's something wrong with it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller. After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.
Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.
Fixes: de14c5f541 ("xfs: verify free block header fields")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_verifier_error is supposed to be called on a corrupt metadata buffer
from within a buffer verifier function, whereas xfs_buf_mark_corrupt
is the function to be called when a piece of code has read a buffer and
catches something that a read verifier cannot. The first function sets
b_error anticipating that the low level buffer handling code will see
the nonzero b_error and clear XBF_DONE on the buffer, whereas the second
function does not.
Since xfs_dir3_free_header_check examines fields in the dir free block
header that require more context than can be provided to read verifiers,
we must call xfs_buf_mark_corrupt when it finds a problem.
Switching the calls has a secondary effect that we no longer corrupt the
buffer state by setting b_error and leaving XBF_DONE set. When /that/
happens, we'll trip over various state assertions (most commonly the
b_error check in xfs_buf_reverify) on a subsequent attempt to read the
buffer.
Fixes: bc1a09b8e3 ("xfs: refactor verifier callers to print address of failing check")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a xfs_failaddr_t parameter to this function so that callers can
potentially pass in (and therefore report) the exact point in the code
where we decided that a metadata buffer was corrupt. This enables us to
wire it up to checking functions that have to run outside of verifiers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a helper function to get rid of buffers that we have decided are
corrupt after the verifiers have run. This function is intended to
handle metadata checks that can't happen in the verifiers, such as
inter-block relationship checking. Note that we now mark the buffer
stale so that it will not end up on any LRU and will be purged on
release.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In e7ee96dfb8, we converted all ITER_ABORT users to use ECANCELED
instead, but we forgot to teach xfs_rmap_has_other_keys not to return
that magic value to callers. Fix it now by using ECANCELED both to
abort the iteration and to signal that we found another reverse mapping.
This enables us to drop the separate boolean flag.
Fixes: e7ee96dfb8 ("xfs: remove all *_ITER_ABORT values")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Log the corrupt buffer before we release the buffer.
Fixes: a5155b870d ("xfs: always log corruption errors")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is just a single user left, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_agfl is a header in front of the AGFL entries that exists
for CRC enabled file systems. For not CRC enabled file systems the AGFL
is simply a list of agbno. Make the CRC case similar to that by just
using the list behind the new header. This indirectly solves a problem
with modern gcc versions that warn about taking addresses of packed
structures (and we have to pack the AGFL given that gcc rounds up
structure sizes). Also replace the helper macro to get from a buffer
with an inline function in xfs_alloc.h to make the code easier to
read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit(). That can confuse things. In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file. If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.
For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should. Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.
Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.
This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:
mkfs.xfs -f /dev/vdb
mount /vdb
touch /vdb/file
chattr +S /vdb/file
accton /vdb/file
mkfs.xfs -f /dev/vdc
mount /vdc
umount /vdc
It causes:
WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
[...]
Call Trace:
write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
do_writepages+0x41/0xe0 mm/page-writeback.c:2344
__filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
generic_write_sync include/linux/fs.h:2867 [inline]
xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
call_write_iter include/linux/fs.h:1901 [inline]
new_sync_write+0x130/0x1d0 fs/read_write.c:483
__kernel_write+0x54/0xe0 fs/read_write.c:515
do_acct_process+0x122/0x170 kernel/acct.c:522
slow_acct_process kernel/acct.c:581 [inline]
acct_process+0x1d4/0x27c kernel/acct.c:607
do_exit+0x83d/0xbc0 kernel/exit.c:791
kthread+0xf1/0x140 kernel/kthread.c:257
ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352
This bug was originally reported by syzbot at
https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com.
Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Let the low-level attr code only allocate the needed buffer size
for xfs_attrmulti_attr_get instead of allocating the upper bound
at the top of the call chain.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No need to allocate the max size if we can just allocate the easily
known actual ACL size.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the round_down macro, and use the size of the uint32 type we
use in the callback that fills the buffer to make the code a little
more clear - the size of it is always the same as int for platforms
that Linux runs on.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Gao Xiang