Patch series "A few fixup patches for memory-failure", v2.
This series contains a few fixup patches to fix incorrect update of page
refcnt, fix possible use-after-free issue and so on. More details can be
found in the respective changelogs.
This patch (of 6):
When hwpoison_filter() refuses to hwpoison a hugetlb page, the refcnt of
the page would have been incremented if res == 1. Using put_page() to fix
the refcnt leaking in this case.
Link: https://lkml.kernel.org/r/20220823032346.4260-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220818130016.45313-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220818130016.45313-2-linmiaohe@huawei.com
Fixes: 405ce05123 ("mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The below is one path where race between page_ext and offline of the
respective memory blocks will cause use-after-free on the access of
page_ext structure.
process1 process2
--------- ---------
a)doing /proc/page_owner doing memory offline
through offline_pages.
b) PageBuddy check is failed
thus proceed to get the
page_owner information
through page_ext access.
page_ext = lookup_page_ext(page);
migrate_pages();
.................
Since all pages are successfully
migrated as part of the offline
operation,send MEM_OFFLINE notification
where for page_ext it calls:
offline_page_ext()-->
__free_page_ext()-->
free_page_ext()-->
vfree(ms->page_ext)
mem_section->page_ext = NULL
c) Check for the PAGE_EXT
flags in the page_ext->flags
access results into the
use-after-free (leading to
the translation faults).
As mentioned above, there is really no synchronization between page_ext
access and its freeing in the memory_offline.
The memory offline steps(roughly) on a memory block is as below:
1) Isolate all the pages
2) while(1)
try free the pages to buddy.(->free_list[MIGRATE_ISOLATE])
3) delete the pages from this buddy list.
4) Then free page_ext.(Note: The struct page is still alive as it is
freed only during hot remove of the memory which frees the memmap,
which steps the user might not perform).
This design leads to the state where struct page is alive but the struct
page_ext is freed, where the later is ideally part of the former which
just representing the page_flags (check [3] for why this design is
chosen).
The abovementioned race is just one example __but the problem persists in
the other paths too involving page_ext->flags access(eg:
page_is_idle())__.
Fix all the paths where offline races with page_ext access by maintaining
synchronization with rcu lock and is achieved in 3 steps:
1) Invalidate all the page_ext's of the sections of a memory block by
storing a flag in the LSB of mem_section->page_ext.
2) Wait until all the existing readers to finish working with the
->page_ext's with synchronize_rcu(). Any parallel process that starts
after this call will not get page_ext, through lookup_page_ext(), for
the block parallel offline operation is being performed.
3) Now safely free all sections ->page_ext's of the block on which
offline operation is being performed.
Note: If synchronize_rcu() takes time then optimizations can be done in
this path through call_rcu()[2].
Thanks to David Hildenbrand for his views/suggestions on the initial
discussion[1] and Pavan kondeti for various inputs on this patch.
[1] https://lore.kernel.org/linux-mm/59edde13-4167-8550-86f0-11fc67882107@quicinc.com/
[2] https://lore.kernel.org/all/a26ce299-aed1-b8ad-711e-a49e82bdd180@quicinc.com/T/#u
[3] https://lore.kernel.org/all/6fa6b7aa-731e-891c-3efb-a03d6a700efa@redhat.com/
[quic_charante@quicinc.com: rename label `loop' to `ext_put_continue' per David]
Link: https://lkml.kernel.org/r/1661496993-11473-1-git-send-email-quic_charante@quicinc.com
Link: https://lkml.kernel.org/r/1660830600-9068-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Fernand Sieber <sieberf@amazon.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pavan Kondeti <quic_pkondeti@quicinc.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the pages being mapped are in HIGHMEM, page_address() returns NULL.
This probably wasn't noticed before because there aren't currently any
architectures with HAVE_ARCH_HUGE_VMALLOC and HIGHMEM, but it's simpler to
call page_to_phys() and futureproofs us against such configurations
existing.
Link: https://lkml.kernel.org/r/Yv6qHc6e+m7TMWhi@casper.infradead.org
Fixes: 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
find_min_pfn_with_active_regions() is only called from free_area_init().
Open-code the PHYS_PFN(memblock_start_of_DRAM()) into free_area_init(),
and kill find_min_pfn_with_active_regions().
Link: https://lkml.kernel.org/r/20220815111017.39341-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the pagetables are shared, we shouldn't copy or take references. Since
src could have unshared and dst shares with another vma, huge_pte_none()
is thus used to determine whether dst_pte is shared. But this check isn't
reliable. A shared pte could have pte none in pagetable in fact. The
page count of ptep page should be checked here in order to reliably
determine whether pte is shared.
[lukas.bulwahn@gmail.com: remove unused local variable dst_entry in copy_hugetlb_page_range()]
Link: https://lkml.kernel.org/r/20220822082525.26071-1-lukas.bulwahn@gmail.com
Link: https://lkml.kernel.org/r/20220816130553.31406-7-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The sysfs group per_node_hstate_attr_group and hstate_demote_attr_group
when h->demote_order != 0 are created in hugetlb_register_node(). But
these sysfs groups are not removed when unregister the node, thus sysfs
group is leaked. Using sysfs_remove_group() to fix this issue.
Link: https://lkml.kernel.org/r/20220816130553.31406-6-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The memory barrier smp_wmb() is needed to make sure that preceding stores
to the page contents become visible before the below set_pte_at() write.
Link: https://lkml.kernel.org/r/20220816130553.31406-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When huge_add_to_page_cache() fails, the page is freed directly without
calling restore_reserve_on_error() to restore reserve for newly allocated
pages not in page cache. Fix this by calling restore_reserve_on_error()
when huge_add_to_page_cache fails.
[linmiaohe@huawei.com: remove err == -EEXIST check and retry logic]
Link: https://lkml.kernel.org/r/20220823030209.57434-4-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220816130553.31406-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If sysfs_create_group() fails with hstate_attr_group, hstate_kobjs[hi]
will be set to NULL. Then it will be passed to sysfs_create_group() if
h->demote_order != 0 thus triggering WARN_ON(!kobj) check. Fix this by
making sure hstate_kobjs[hi] != NULL when calling sysfs_create_group.
Link: https://lkml.kernel.org/r/20220816130553.31406-3-linmiaohe@huawei.com
Fixes: 79dfc69552 ("hugetlb: add demote hugetlb page sysfs interfaces")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "A few fixup patches for hugetlb".
This series contains a few fixup patches to fix incorrect update of
max_huge_pages, fix WARN_ON(!kobj) in sysfs_create_group() and so on.
More details can be found in the respective changelogs.
This patch (of 6):
There should be pages_per_huge_page(h) /
pages_per_huge_page(target_hstate) pages incremented for
target_hstate->max_huge_pages when page is demoted. Update max_huge_pages
accordingly for consistency.
Link: https://lkml.kernel.org/r/20220816130553.31406-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220816130553.31406-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The promotion hot threshold is workload and system configuration
dependent. So in this patch, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit. If the
hint page fault latency of a page is less than the hot threshold, we will
try to promote the page, and the page is called the candidate promotion
page.
If the number of the candidate promotion pages in the statistics interval
is much more than the promotion rate limit, the hot threshold will be
decreased to reduce the number of the candidate promotion pages.
Otherwise, the hot threshold will be increased to increase the number of
the candidate promotion pages.
To make the above method works, in each statistics interval, the total
number of the pages to check (on which the hint page faults occur) and the
hot/cold distribution need to be stable. Because the page tables are
scanned linearly in NUMA balancing, but the hot/cold distribution isn't
uniform along the address usually, the statistics interval should be
larger than the NUMA balancing scan period. So in the patch, the max scan
period is used as statistics interval and it works well in our tests.
Link: https://lkml.kernel.org/r/20220713083954.34196-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patch as
the page promotion rate limit mechanism.
The number of the candidate pages to be promoted to the fast memory node
via NUMA balancing is counted, if the count exceeds the limit specified by
the users, the NUMA balancing promotion will be stopped until the next
second.
A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added
for the users to specify the limit.
Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If a process has not enough memory to allocate a new virtual mapping, we
may meet verious kinds of error, eg, fork cannot allocate memory, SIGBUS
error in shmem, but it is difficult to confirm them, let's add some debug
information to easily to check this scenario if __vm_enough_memory fails.
Link: https://lkml.kernel.org/r/20220726145428.8030-1-wangkefeng.wang@huawei.com
Reported-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When pinning pages with FOLL_LONGTERM check_and_migrate_movable_pages() is
called to migrate pages out of zones which should not contain any longterm
pinned pages.
When migration succeeds all pages will have been unpinned so pinning needs
to be retried. This is indicated by returning zero. When all pages are
in the correct zone the number of pinned pages is returned.
However migration can also fail, in which case pages are unpinned and
-ENOMEM is returned. However if the failure was due to not being unable
to isolate a page zero is returned. This leads to indefinite looping in
__gup_longterm_locked().
Fix this by simplifying the return codes such that zero indicates all
pages were successfully pinned in the correct zone while errors indicate
either pages were migrated and pinning should be retried or that migration
has failed and therefore the pinning operation should fail.
[syoshida@redhat.com: fix return value for __gup_longterm_locked()]
Link: https://lkml.kernel.org/r/20220821183547.950370-1-syoshida@redhat.com
[akpm@linux-foundation.org: fix code layout, per John]
[yshigeru@gmail.com: fix uninitialized return value on __gup_longterm_locked()]
Link: https://lkml.kernel.org/r/20220827230037.78876-1-syoshida@redhat.com
Link: https://lkml.kernel.org/r/20220729024645.764366-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use helper for_each_hstate and hstate_index to iterate the hstate and get
the hstate index. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220729080106.12752-6-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's better to use NUMA_NO_NODE instead of magic number -1. Minor
readability improvement.
Link: https://lkml.kernel.org/r/20220729080106.12752-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The return value of set_hugetlb_cgroup and set_hugetlb_cgroup_rsvd are
always ignored. Remove them to clean up the code.
Link: https://lkml.kernel.org/r/20220729080106.12752-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use helper macro SZ_1K, SZ_1M and SZ_1G to do the size conversion. Minor
readability improvement.
Link: https://lkml.kernel.org/r/20220729080106.12752-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "A few cleanup patches for hugetlb_cgroup", v2.
This series contains a few cleaup patches to remove unneeded check, use
helper macro, remove unneeded return value and so on. More details can be
found in the respective changelogs.
This patch (of 5):
When code reaches here, nr_pages must be > 0. Remove unneeded nr_pages > 0
check to simplify the code.
Link: https://lkml.kernel.org/r/20220729080106.12752-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220729080106.12752-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
libhugetlbfs, the user side utitlity to work with hugepages, does not have
any active support. There are only 2 selftests which are part of in
vm/hmm_test.c that depends on libhugetlbfs.
This patch modifies the tests so that they will not require libhugetlb
library.
[axelrasmussen@google.com: : remove orphaned references to local_config.{h,mk}]
Link: https://lkml.kernel.org/r/20220831211526.2743216-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220801070231.13831-1-tsahu@linux.ibm.com
Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Tested-by: Zach O'Keefe <zokeefe@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By default kfence allocation can happen for any slab object, whose size is
up to PAGE_SIZE, as long as that allocation is the first allocation after
expiration of kfence sample interval. But in certain debugging scenarios
we may be interested in debugging corruptions involving some specific slub
objects like dentry or ext4_* etc. In such cases limiting kfence for
allocations involving only specific slub objects will increase the
probablity of catching the issue since kfence pool will not be consumed by
other slab objects.
This patch introduces a sysfs interface
'/sys/kernel/slab/<name>/skip_kfence' to disable kfence for specific
slabs. Having the interface work in this way does not impact
current/default behavior of kfence and allows us to use kfence for
specific slabs (when needed) as well. The decision to skip/use kfence is
taken depending on whether kmem_cache.flags has (newly introduced)
SLAB_SKIP_KFENCE flag set or not.
Link: https://lkml.kernel.org/r/20220814195353.2540848-1-imran.f.khan@oracle.com
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Not all huge page APIs support FOLL_GET option, so move_pages() syscall
will fail to get the page node information for some huge pages.
Like x86 on linux 5.19 with 1GB huge page API follow_huge_pud(), it will
return NULL page for FOLL_GET when calling move_pages() syscall with the
NULL 'nodes' parameter, the 'status' parameter has '-2' error in array.
Note: follow_huge_pud() now supports FOLL_GET in linux 6.0.
Link: https://lore.kernel.org/all/20220714042420.1847125-3-naoya.horiguchi@linux.dev
But these huge page APIs don't support FOLL_GET:
1. follow_huge_pud() in arch/s390/mm/hugetlbpage.c
2. follow_huge_addr() in arch/ia64/mm/hugetlbpage.c
It will cause WARN_ON_ONCE for FOLL_GET.
3. follow_huge_pgd() in mm/hugetlb.c
This is an temporary solution to mitigate the side effect of the race
condition fix by calling follow_page() with FOLL_GET set for huge pages.
After supporting follow huge page by FOLL_GET is done, this fix can be
reverted safely.
Link: https://lkml.kernel.org/r/20220823135841.934465-2-haiyue.wang@intel.com
Link: https://lkml.kernel.org/r/20220812084921.409142-1-haiyue.wang@intel.com
Fixes: 4cd614841c ("mm: migration: fix possible do_pages_stat_array racing with memory offline")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After patch "mm/workingset: prepare the workingset detection
infrastructure for anon LRU", we can handle the refaults of anonymous
pages too. So the annotations of refaults should cover both of anonymous
pages and file pages.
Link: https://lkml.kernel.org/r/20220813080757.59131-1-yang.yang29@zte.com.cn
Fixes: 170b04b7ae ("mm/workingset: prepare the workingset detection infrastructure for anon LRU")
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The parameter 'struct damon_ctx *ctx' is unnecessary in damon region split
operation, so we can remove it.
Link: https://lkml.kernel.org/r/1660403943-29124-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The -f option is to filter out the information of blocks whose memory has
not been released, I noticed some blocks should not be filtered out.
Commit 9cc7e96aa8 ("mm/page_owner: record timestamp and pid") records
the allocation timestamp (ts_nsec) of all pages.
Commit 866b485262 ("mm/page_owner: record the timestamp of all pages
during free") records the free timestamp (free_ts_nsec) of all pages.
When the page is allocated for the first time, the initial value of
free_ts_nsec is 0, and the corresponding time will be obtained when the
page is released. But during reallocation the free_ts_nsec will not reset
to 0 again. In particular, when page migration occurs, these two
timestamps will be the same.
Now page_owner_sort removes all text blocks whose free_ts_nsec is not 0
when using -f option. However, this way can only select pages allocated
for the first time. If a freed page is reallocated, free_ts_nsec will be
less than ts_nsec; if page migration occurs, the two timestamps will be
equal. These cases should be considered as pages are not released.
So I fix the function is_need() to keep text blocks that meet the above
two conditions when using -f option.
Link: https://lkml.kernel.org/r/20220812155515.30846-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_test_hugetlb() will call PageHeadHuge which is a function call,
and blocks the compiler from recognizing this redundant load.
After rearranging the code, stack usage is dropped from 32 to 24, and
the function size is smaller (tested on GCC 12):
Before:
Stack usage:
mm/util.c:845:5:folio_mapcount 32 static
Size:
0000000000000ea0 00000000000000c7 T folio_mapcount
After:
Stack usage:
mm/util.c:845:5:folio_mapcount 24 static
Size:
0000000000000ea0 00000000000000b0 T folio_mapcount
Link: https://lkml.kernel.org/r/20220801173155.92008-1-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It seems unnecessary to search pages with order < alloc_order in
fallback allocation.
This can currently happen with ALLOC_NOFRAGMENT and alloc_order >
pageblock_order, so add a test to prevent it.
[vbabka@suse.cz: changelog addition]
Link: https://lkml.kernel.org/r/20220803025121.47018-1-wuyun.abel@bytedance.com
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The allocation address of the table pointer variable is first performed in
the function, no initialization assignment is required, and no invalid
pointer will appear.
Link: https://lkml.kernel.org/r/20220803064118.3664-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song found that after MPOL_PREFERRED_MANY policy was introduced in
commit b27abaccf8 ("mm/mempolicy: add MPOL_PREFERRED_MANY for multiple
preferred nodes"), the policy_nodemask_current()'s semantics for this new
policy has been changed, which returns 'preferred' nodes instead of
'allowed' nodes.
With the changed semantic of policy_nodemask_current, a task with
MPOL_PREFERRED_MANY policy could fail to get its reservation even though
it can fall back to other nodes (either defined by cpusets or all online
nodes) for that reservation failing mmap calles unnecessarily early.
The fix is to not consider MPOL_PREFERRED_MANY for reservations at all
because they, unlike MPOL_MBIND, do not pose any actual hard constrain.
Michal suggested the policy_nodemask_current() is only used by hugetlb,
and could be moved to hugetlb code with more explicit name to enforce the
'allowed' semantics for which only MPOL_BIND policy matters.
apply_policy_zone() is made extern to be called in hugetlb code and its
return value is changed to bool.
[1]. https://lore.kernel.org/lkml/20220801084207.39086-1-songmuchun@bytedance.com/t/
Link: https://lkml.kernel.org/r/20220805005903.95563-1-feng.tang@intel.com
Fixes: b27abaccf8 ("mm/mempolicy: add MPOL_PREFERRED_MANY for multiple preferred nodes")
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reported-by: Muchun Song <songmuchun@bytedance.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mems_allowed field can be modified by other tasks, so it isn't safe to
access it with alloc_lock unlocked even in the current process context.
Say there are two tasks: A from cpusetA is performing set_mempolicy(2),
and B is changing cpusetA's cpuset.mems:
A (set_mempolicy) B (echo xx > cpuset.mems)
-------------------------------------------------------
pol = mpol_new();
update_tasks_nodemask(cpusetA) {
foreach t in cpusetA {
cpuset_change_task_nodemask(t) {
mpol_set_nodemask(pol) {
task_lock(t); // t could be A
new = f(A->mems_allowed);
update t->mems_allowed;
pol.create(pol, new);
task_unlock(t);
}
}
}
}
task_lock(A);
A->mempolicy = pol;
task_unlock(A);
In this case A's pol->nodes is computed by old mems_allowed, and could
be inconsistent with A's new mems_allowed.
While it is different when replacing vmas' policy: the pol->nodes is
gone wild only when current_cpuset_is_being_rebound():
A (mbind) B (echo xx > cpuset.mems)
-------------------------------------------------------
pol = mpol_new();
mmap_write_lock(A->mm);
cpuset_being_rebound = cpusetA;
update_tasks_nodemask(cpusetA) {
foreach t in cpusetA {
cpuset_change_task_nodemask(t) {
mpol_set_nodemask(pol) {
task_lock(t); // t could be A
mask = f(A->mems_allowed);
update t->mems_allowed;
pol.create(pol, mask);
task_unlock(t);
}
}
foreach v in A->mm {
if (cpuset_being_rebound == cpusetA)
pol.rebind(pol, cpuset.mems);
v->vma_policy = pol;
}
mmap_write_unlock(A->mm);
mmap_write_lock(t->mm);
mpol_rebind_mm(t->mm);
mmap_write_unlock(t->mm);
}
}
cpuset_being_rebound = NULL;
In this case, the cpuset.mems, which has already done updating, is finally
used for calculating pol->nodes, rather than A->mems_allowed. So it is OK
to call mpol_set_nodemask() with alloc_lock unlocked when doing mbind(2).
Link: https://lkml.kernel.org/r/20220811124157.74888-1-wuyun.abel@bytedance.com
Fixes: 78b132e9ba ("mm/mempolicy: remove or narrow the lock on current")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently only 12 characters of the cma name is being used as the debug
directories where as the cma name can be of length CMA_MAX_NAME(=64)
characters. One side problem with this is having 2 cma's with first
common 12 characters would end up in trying to create directories with
same name and fails with -EEXIST thus can limit cma debug functionality.
The 'cma-' prefix is used initially where cma areas don't have any names
and are represented by simple integer values. Since now each cma would be
having its own name, drop 'cma-' prefix for the cma debug directories as
they are clearly evident that they are for cma debug through creating them
in /sys/kernel/debug/cma/ path.
Link: https://lkml.kernel.org/r/1660223729-22461-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavan Kondeti <quic_pkondeti@quicinc.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The argument is always set to end_swap_bio_write, so remove the argument
and mark end_swap_bio_write static.
Link: https://lkml.kernel.org/r/20220811141741.660214-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pool->size_class array elements can't be NULL, so this check
is not needed.
In the whole code, we assign pool->size_class[i] values that are
not NULL. Releasing memory for these values occurs in the
zs_destroy_pool() function, which also releases and destroys the pool.
In addition, in the zs_stats_size_show() and async_free_zspage(),
with similar iterations over the array, we don't check it for NULL
pointer.
Link: https://lkml.kernel.org/r/20220811153755.16102-3-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "tidy up zsmalloc implementation"
This patchset remove some unnecessary checks and adds a clarifying
comment. While analysing zs_object_copy() function code, I spent some
time to understand what the call kunmap_atomic(d_addr) is for. It seems
that this point is not trivial and it is worth adding a comment.
This patch (of 2):
It's not obvious why kunmap_atomic(d_addr) call is needed.
[akpm@linux-foundation.org: tweak comment layout]
Link: https://lkml.kernel.org/r/20220811153755.16102-1-avromanov@sberdevices.ru
Link: https://lkml.kernel.org/r/20220811153755.16102-2-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The magic number 0 and 1 are used in several places in vmscan.c.
Define macros for them to improve code readability.
Link: https://lkml.kernel.org/r/20220808005644.1721066-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This new mode was recently added to the userfaultfd selftest. We want to
exercise both userfaultfd(2) as well as /dev/userfaultfd, so add both
test cases to the script.
Link: https://lkml.kernel.org/r/20220808175614.3885028-6-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Explain the different ways to create a new userfaultfd, and how access
control works for each way.
[axelrasmussen@google.com: improve wording in documentation, per Mike]
Link: https://lkml.kernel.org/r/20220819205201.658693-5-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220808175614.3885028-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We clearly want to ensure both userfaultfd(2) and /dev/userfaultfd keep
working into the future, so just run the test twice, using each interface.
Instead of always testing both userfaultfd(2) and /dev/userfaultfd, let
the user choose which to test.
As with other test features, change the behavior based on a new command
line flag. Introduce the idea of "test mods", which are generic (not
specific to a test type) modifications to the behavior of the test. This
is sort of borrowed from this RFC patch series [1], but simplified a bit.
The benefit is, in "typical" configurations this test is somewhat slow
(say, 30sec or something). Testing both clearly doubles it, so it may not
always be desirable, as users are likely to use one or the other, but
never both, in the "real world".
[1]: https://patchwork.kernel.org/project/linux-mm/patch/20201129004548.1619714-14-namit@vmware.com/
[axelrasmussen@google.com: modify selftest to exit with KSFT_SKIP *only* when features are unsupported, per Mike]
Link: https://lkml.kernel.org/r/20220819205201.658693-4-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220808175614.3885028-4-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Historically, it has been shown that intercepting kernel faults with
userfaultfd (thereby forcing the kernel to wait for an arbitrary amount of
time) can be exploited, or at least can make some kinds of exploits
easier. So, in 37cd0575b8 "userfaultfd: add UFFD_USER_MODE_ONLY" we
changed things so, in order for kernel faults to be handled by
userfaultfd, either the process needs CAP_SYS_PTRACE, or this sysctl must
be configured so that any unprivileged user can do it.
In a typical implementation of a hypervisor with live migration (take
QEMU/KVM as one such example), we do indeed need to be able to handle
kernel faults. But, both options above are less than ideal:
- Toggling the sysctl increases attack surface by allowing any
unprivileged user to do it.
- Granting the live migration process CAP_SYS_PTRACE gives it this
ability, but *also* the ability to "observe and control the
execution of another process [...], and examine and change [its]
memory and registers" (from ptrace(2)). This isn't something we need
or want to be able to do, so granting this permission violates the
"principle of least privilege".
This is all a long winded way to say: we want a more fine-grained way to
grant access to userfaultfd, without granting other additional permissions
at the same time.
To achieve this, add a /dev/userfaultfd misc device. This device provides
an alternative to the userfaultfd(2) syscall for the creation of new
userfaultfds. The idea is, any userfaultfds created this way will be able
to handle kernel faults, without the caller having any special
capabilities. Access to this mechanism is instead restricted using e.g.
standard filesystem permissions.
[axelrasmussen@google.com: Handle misc_register() failure properly]
Link: https://lkml.kernel.org/r/20220819205201.658693-3-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220808175614.3885028-3-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd: add /dev/userfaultfd for fine grained access
control", v7.
Why not ...?
============
- Why not /proc/[pid]/userfaultfd? Two main points (additional discussion [1]):
- /proc/[pid]/* files are all owned by the user/group of the process, and
they don't really support chmod/chown. So, without extending procfs it
doesn't solve the problem this series is trying to solve.
- The main argument *for* this was to support creating UFFDs for remote
processes. But, that use case clearly calls for CAP_SYS_PTRACE, so to
support this we could just use the UFFD syscall as-is.
- Why not use a syscall? Access to syscalls is generally controlled by
capabilities. We don't have a capability which is used for userfaultfd access
without also granting more / other permissions as well, and adding a new
capability was rejected [2].
- It's possible a LSM could be used to control access instead, but I have
some concerns. I don't think this approach would be as easy to use,
particularly if we were to try to solve this with something heavyweight
like SELinux. Maybe we could pursue adding a new LSM specifically for
this user case, but it may be too narrow of a case to justify that.
[1]: https://patchwork.kernel.org/project/linux-mm/cover/20220719195628.3415852-1-axelrasmussen@google.com/
[2]: https://lore.kernel.org/lkml/686276b9-4530-2045-6bd8-170e5943abe4@schaufler-ca.com/T/
This patch (of 5):
This not being included was just a simple oversight. There are certain
features (like minor fault support) which are only enabled on shared
mappings, so without including hugetlb_shared we actually lose a
significant amount of test coverage.
Link: https://lkml.kernel.org/r/20220808175614.3885028-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220808175614.3885028-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use kmalloc(...) rather than kmalloc_array(1, ...) because the number of
elements we are specifying in this case is 1, kmalloc would accomplish the
same thing and we can simplify.
Link: https://lkml.kernel.org/r/20220808220019.1680469-1-klee33@uw.edu
Signed-off-by: Kenneth Lee <klee33@uw.edu>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit 5d1fd5dc87 ("mm,hwpoison: introduce MF_MSG_UNSPLIT_THP"),
the action_result(,MF_MSG_UNSPLIT_THP,) called to show memory error event
in memory_failure(), so the pr_info() in try_to_split_thp_page() is only
needed in soft_offline_in_use_page().
Meanwhile this could also fix the unexpected prefix for "thp split failed"
due to commit 96f96763de ("mm: memory-failure: convert to pr_fmt()").
Link: https://lkml.kernel.org/r/20220809111813.139690-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Align larger anonymous memory mappings on THP boundaries by going through
thp_get_unmapped_area if THPs are enabled for the current process.
With this patch, larger anonymous mappings are now THP aligned. When a
malloc library allocates a 2MB or larger arena, that arena can now be
mapped with THPs right from the start, which can result in better TLB hit
rates and execution time.
Link: https://lkml.kernel.org/r/20220809142457.4751229f@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove unused variable 'nid' in offline_page_ext(). This is not used
since the page_ext code inception.
Link: https://lkml.kernel.org/r/1659330397-11817-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin