Pull misc vfs fixes from Al Viro:
"Assorted fixes all over the place; some of that is -stable fodder,
some regressions from the last window"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
ecryptfs: fix unlink and rmdir in face of underlying fs modifications
audit_get_nd(): don't unlock parent too early
exportfs_decode_fh(): negative pinned may become positive without the parent locked
cgroup: don't put ERR_PTR() into fc->root
autofs: fix a leak in autofs_expire_indirect()
aio: Fix io_pgetevents() struct __compat_aio_sigset layout
fs/namespace.c: fix use-after-free of mount in mnt_warn_timestamp_expiry()
Increase the maximum allowed count of synthetic event fields from 16 to 32
in order to allow for larger-than-usual events.
Link: http://lkml.kernel.org/r/20191115091730.9192-1-dedekind1@gmail.com
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
At the moment, the compilation of the old time32 system calls depends
purely on the architecture. As systems with new libc based on 64-bit
time_t are getting deployed, even architectures that previously supported
these (notably x86-32 and arm32 but also many others) no longer depend on
them, and removing them from a kernel image results in a smaller kernel
binary, the same way we can leave out many other optional system calls.
More importantly, on an embedded system that needs to keep working
beyond year 2038, any user space program calling these system calls
is likely a bug, so removing them from the kernel image does provide
an extra debugging help for finding broken applications.
I've gone back and forth on hiding this option unless CONFIG_EXPERT
is set. This version leaves it visible based on the logic that
eventually it will be turned off indefinitely.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no 64-bit version of getitimer/setitimer since that is not
actually needed. However, the implementation is built around the
deprecated 'struct timeval' type.
Change the code to use timespec64 internally to reduce the dependencies
on timeval and associated helper functions.
Minor adjustments in the code are needed to make the native and compat
version work the same way, and to keep the range check working after
the conversion.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Preparing for a change to the itimer internals, stop using the
do_setitimer() symbol and instead use a new higher-level interface.
The do_getitimer()/do_setitimer functions can now be made static,
allowing the compiler to potentially produce better object code.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The itimer handling for the old alpha osf_setitimer/osf_getitimer
system calls is identical to the compat version of getitimer/setitimer,
so just use those directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The structure is only used in one place, moving it there simplifies the
interface and helps with later changes to this code.
Rename it to match the other time32 structures in the process.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The compat_get_timeval() and timeval_valid() interfaces are deprecated
and getting removed along with the definition of struct timeval itself.
Change the two implementations of the settimeofday() system call to
open-code these helpers and completely avoid references to timeval.
The timeval_valid() call is not needed any more here, only a check to
avoid overflowing tv_nsec during the multiplication, as there is another
range check in do_sys_settimeofday64().
Tested-by: syzbot+dccce9b26ba09ca49966@syzkaller.appspotmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All of the remaining syscalls that pass a timeval (gettimeofday, utime,
futimesat) can trivially be changed to pass a __kernel_old_timeval
instead, which has a compatible layout, but avoids ambiguity with
the timeval type in user space.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are two 'struct timeval' fields in 'struct rusage'.
Unfortunately the definition of timeval is now ambiguous when used in
user space with a libc that has a 64-bit time_t, and this also changes
the 'rusage' definition in user space in a way that is incompatible with
the system call interface.
While there is no good solution to avoid all ambiguity here, change
the definition in the kernel headers to be compatible with the kernel
ABI, using __kernel_old_timeval as an unambiguous base type.
In previous discussions, there was also a plan to add a replacement
for rusage based on 64-bit timestamps and nanosecond resolution,
i.e. 'struct __kernel_timespec'. I have patches for that as well,
if anyone thinks we should do that.
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is mainly a patch for clarification, and to let us remove
the time_t definition from the kernel to prevent new users from
creeping in that might not be y2038-safe.
All remaining uses of 'time_t' or '__kernel_time_t' are part of
the user API that cannot be changed by that either have a
replacement or that do not suffer from the y2038 overflow.
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Exporting perf_event_pause() as an external accessor for kernel users (such
as KVM) who may do both disable perf_event and read count with just one
time to hold perf_event_ctx_lock. Also the value could be reset optionally.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, perf_event_period() is used by user tools via ioctl. Based on
naming convention, exporting perf_event_period() for kernel users (such
as KVM) who may recalibrate the event period for their assigned counter
according to their requirements.
The perf_event_period() is an external accessor, just like the
perf_event_{en,dis}able() and should thus use perf_event_ctx_lock().
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the race between load and unload a kernel module.
sys_delete_module()
try_stop_module()
mod->state = _GOING
add_unformed_module()
old = find_module_all()
(old->state == _GOING =>
wait_event_interruptible())
During pre-condition
finished_loading() rets 0
schedule()
(never gets waken up later)
free_module()
mod->state = _UNFORMED
list_del_rcu(&mod->list)
(dels mod from "modules" list)
return
The race above leads to modprobe hanging forever on loading
a module.
Error paths on loading module call wake_up_all(&module_wq) after
freeing module, so let's do the same on straight module unload.
Fixes: 6e6de3dee5 ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
uclamp_update_active() should perform the update when
p->uclamp[clamp_id].active is true. But when the logic was inverted in
[1], the if condition wasn't inverted correctly too.
[1] https://lore.kernel.org/lkml/20190902073836.GO2369@hirez.programming.kicks-ass.net/
Reported-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: babbe170e0 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Link: https://lkml.kernel.org/r/20191114211052.15116-1-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While attempting to clear the busy bit at the end of a work execution,
atomic_cmpxchg() expects the value of the flags with the pending bit
cleared as the old value. However by mistake the value of the flags is
passed without clearing the pending bit first.
As a result, clearing the busy bit fails and irq_work_sync() may stall:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [blktrace:4948]
CPU: 0 PID: 4948 Comm: blktrace Not tainted 5.4.0-rc7-00003-gfeb4a51323bab #1
RIP: 0010:irq_work_sync+0x4/0x10
Call Trace:
relay_close_buf+0x19/0x50
relay_close+0x64/0x100
blk_trace_free+0x1f/0x50
__blk_trace_remove+0x1e/0x30
blk_trace_ioctl+0x11b/0x140
blkdev_ioctl+0x6c1/0xa40
block_ioctl+0x39/0x40
do_vfs_ioctl+0xa5/0x700
ksys_ioctl+0x70/0x80
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5b/0x1d0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
So clear the appropriate bit before passing the old flags to cmpxchg().
Fixes: feb4a51323 ("irq_work: Slightly simplify IRQ_WORK_PENDING clearing")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lkml.kernel.org/r/20191113171201.14032-1-frederic@kernel.org
Add a new function modify_ftrace_direct() that will allow a user to update
an existing direct caller to a new trampoline, without missing hits due to
unregistering one and then adding another.
Link: https://lore.kernel.org/r/20191109022907.6zzo6orhxpt5n2sv@ast-mbp.dhcp.thefacebook.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The latency_fsnotify() stub when the function is not defined, was missing
the "inline".
Link: https://lore.kernel.org/r/20191115140213.74c5efe7@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
743210386c ("cgroup: use cgrp->kn->id as the cgroup ID") added WARN
which triggers if cgroup_id(root_cgrp) is not 1. This is fine on
64bit ino archs but on 32bit archs cgroup ID is ((gen << 32) | ino)
and gen starts at 1, so the root id is 0x1_0000_0001 instead of 1
always triggering the WARN.
What we wanna make sure is that the ino part is 1. Fix it.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 743210386c ("cgroup: use cgrp->kn->id as the cgroup ID")
Signed-off-by: Tejun Heo <tj@kernel.org>
There was a stray tab in the help text of the aforementioned config
option which showed like this:
The "print fmt" of the trace events will show the enum/sizeof names
instead of their values. This can cause problems for user space tools
...
in menuconfig. Remove it and end a sentence with a fullstop.
No functional changes.
Link: http://lkml.kernel.org/r/20191112174219.10933-1-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Without this, buffers can be printed with __print_array macro that has
no formatting options and can be hard to read. The other way is to
mimic formatting capability with multiple calls of trace event with one
call per row which gives performance impact and different timestamp in
each row.
Link: http://lkml.kernel.org/r/1573130738-29390-2-git-send-email-piotrx.maziarz@linux.intel.com
Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Check whether the non-suffixed symbol is notrace, since suffixed
symbols are generated by the compilers for optimization. Based on
these suffixed symbols, notrace check might not work because
some of them are just a partial code of the original function.
(e.g. cold-cache (unlikely) code is separated from original
function as FUNCTION.cold.XX)
For example, without this fix,
# echo p device_add.cold.67 > /sys/kernel/debug/tracing/kprobe_events
sh: write error: Invalid argument
# cat /sys/kernel/debug/tracing/error_log
[ 135.491035] trace_kprobe: error: Failed to register probe event
Command: p device_add.cold.67
^
# dmesg | tail -n 1
[ 135.488599] trace_kprobe: Could not probe notrace function device_add.cold.67
With this,
# echo p device_add.cold.66 > /sys/kernel/debug/tracing/kprobe_events
# cat /sys/kernel/debug/kprobes/list
ffffffff81599de9 k device_add.cold.66+0x0 [DISABLED]
Actually, kprobe blacklist already did similar thing,
see within_kprobe_blacklist().
Link: http://lkml.kernel.org/r/157233790394.6706.18243942030937189679.stgit@devnote2
Fixes: 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fail to allocate memory for tgid_map, because it requires order-6 page.
detail as:
c3 sh: page allocation failure: order:6,
mode:0x140c0c0(GFP_KERNEL), nodemask=(null)
c3 sh cpuset=/ mems_allowed=0
c3 CPU: 3 PID: 5632 Comm: sh Tainted: G W O 4.14.133+ #10
c3 Hardware name: Generic DT based system
c3 Backtrace:
c3 [<c010bdbc>] (dump_backtrace) from [<c010c08c>](show_stack+0x18/0x1c)
c3 [<c010c074>] (show_stack) from [<c0993c54>](dump_stack+0x84/0xa4)
c3 [<c0993bd0>] (dump_stack) from [<c0229858>](warn_alloc+0xc4/0x19c)
c3 [<c0229798>] (warn_alloc) from [<c022a6e4>](__alloc_pages_nodemask+0xd18/0xf28)
c3 [<c02299cc>] (__alloc_pages_nodemask) from [<c0248344>](kmalloc_order+0x20/0x38)
c3 [<c0248324>] (kmalloc_order) from [<c0248380>](kmalloc_order_trace+0x24/0x108)
c3 [<c024835c>] (kmalloc_order_trace) from [<c01e6078>](set_tracer_flag+0xb0/0x158)
c3 [<c01e5fc8>] (set_tracer_flag) from [<c01e6404>](trace_options_core_write+0x7c/0xcc)
c3 [<c01e6388>] (trace_options_core_write) from [<c0278b1c>](__vfs_write+0x40/0x14c)
c3 [<c0278adc>] (__vfs_write) from [<c0278e10>](vfs_write+0xc4/0x198)
c3 [<c0278d4c>] (vfs_write) from [<c027906c>](SyS_write+0x6c/0xd0)
c3 [<c0279000>] (SyS_write) from [<c01079a0>](ret_fast_syscall+0x0/0x54)
Switch to use kvcalloc to avoid unexpected allocation failures.
Link: http://lkml.kernel.org/r/1571888070-24425-1-git-send-email-chunyan.zhang@unisoc.com
Signed-off-by: Yuming Han <yuming.han@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The C compiler is allowing more checks to make sure that function pointers
are assigned to the correct prototype function. Unfortunately, the function
graph tracer uses a special name with its assigned ftrace_graph_return
function pointer that maps to a stub function used by the function tracer
(ftrace_stub). The ftrace_graph_return variable is compared to the
ftrace_stub in some archs to know if the function graph tracer is enabled or
not. This means we can not just simply create a new function stub that
compares it without modifying all the archs.
Instead, have the linker script create a function_graph_stub that maps to
ftrace_stub, and this way we can define the prototype for it to match the
prototype of ftrace_graph_return, and make the compiler checks all happy!
Link: http://lkml.kernel.org/r/20191015090055.789a0aed@gandalf.local.home
Cc: linux-sh@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As part of commit f45d1225ad ("tracing: Kernel access to Ftrace
instances") we exported certain functions. Here, we are adding some additional
NULL checks to ensure safe usage by users of these APIs.
Link: http://lkml.kernel.org/r/1565805327-579-4-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A trace array can be destroyed from userspace or kernel. Verify if the
trace array exists before proceeding to destroy/remove it.
Link: http://lkml.kernel.org/r/1565805327-579-3-git-send-email-divya.indi@oracle.com
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Divya Indi <divya.indi@oracle.com>
[ Removed unneeded braces ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Declare the newly introduced and exported APIs in the header file -
include/linux/trace.h. Moving previous declarations from
kernel/trace/trace.h to include/linux/trace.h.
Link: http://lkml.kernel.org/r/1565805327-579-2-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The event_class_ftrace_##call and event_##call do not seem
to be used outside of trace_export.c so make them both static
to avoid a number of sparse warnings:
kernel/trace/trace_entries.h:59:1: warning: symbol 'event_class_ftrace_function' was not declared. Should it be static?
kernel/trace/trace_entries.h:59:1: warning: symbol '__event_function' was not declared. Should it be static?
kernel/trace/trace_entries.h:77:1: warning: symbol 'event_class_ftrace_funcgraph_entry' was not declared. Should it be static?
kernel/trace/trace_entries.h:77:1: warning: symbol '__event_funcgraph_entry' was not declared. Should it be static?
kernel/trace/trace_entries.h:93:1: warning: symbol 'event_class_ftrace_funcgraph_exit' was not declared. Should it be static?
kernel/trace/trace_entries.h:93:1: warning: symbol '__event_funcgraph_exit' was not declared. Should it be static?
kernel/trace/trace_entries.h:129:1: warning: symbol 'event_class_ftrace_context_switch' was not declared. Should it be static?
kernel/trace/trace_entries.h:129:1: warning: symbol '__event_context_switch' was not declared. Should it be static?
kernel/trace/trace_entries.h:149:1: warning: symbol 'event_class_ftrace_wakeup' was not declared. Should it be static?
kernel/trace/trace_entries.h:149:1: warning: symbol '__event_wakeup' was not declared. Should it be static?
kernel/trace/trace_entries.h:171:1: warning: symbol 'event_class_ftrace_kernel_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:171:1: warning: symbol '__event_kernel_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:191:1: warning: symbol 'event_class_ftrace_user_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:191:1: warning: symbol '__event_user_stack' was not declared. Should it be static?
kernel/trace/trace_entries.h:214:1: warning: symbol 'event_class_ftrace_bprint' was not declared. Should it be static?
kernel/trace/trace_entries.h:214:1: warning: symbol '__event_bprint' was not declared. Should it be static?
kernel/trace/trace_entries.h:230:1: warning: symbol 'event_class_ftrace_print' was not declared. Should it be static?
kernel/trace/trace_entries.h:230:1: warning: symbol '__event_print' was not declared. Should it be static?
kernel/trace/trace_entries.h:247:1: warning: symbol 'event_class_ftrace_raw_data' was not declared. Should it be static?
kernel/trace/trace_entries.h:247:1: warning: symbol '__event_raw_data' was not declared. Should it be static?
kernel/trace/trace_entries.h:262:1: warning: symbol 'event_class_ftrace_bputs' was not declared. Should it be static?
kernel/trace/trace_entries.h:262:1: warning: symbol '__event_bputs' was not declared. Should it be static?
kernel/trace/trace_entries.h:277:1: warning: symbol 'event_class_ftrace_mmiotrace_rw' was not declared. Should it be static?
kernel/trace/trace_entries.h:277:1: warning: symbol '__event_mmiotrace_rw' was not declared. Should it be static?
kernel/trace/trace_entries.h:298:1: warning: symbol 'event_class_ftrace_mmiotrace_map' was not declared. Should it be static?
kernel/trace/trace_entries.h:298:1: warning: symbol '__event_mmiotrace_map' was not declared. Should it be static?
kernel/trace/trace_entries.h:322:1: warning: symbol 'event_class_ftrace_branch' was not declared. Should it be static?
kernel/trace/trace_entries.h:322:1: warning: symbol '__event_branch' was not declared. Should it be static?
kernel/trace/trace_entries.h:343:1: warning: symbol 'event_class_ftrace_hwlat' was not declared. Should it be static?
kernel/trace/trace_entries.h:343:1: warning: symbol '__event_hwlat' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191015121012.18824-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Add additional header output for PREEMPT_RT.
Link: http://lkml.kernel.org/r/20191015191821.11479-34-bigeasy@linutronix.de
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This burst feature enables the user to generate a burst of
preempt/irqsoff latencies. This makes it possible to test whether we
are able to detect latencies that systematically occur very close to
each other.
The maximum burst size is 10. We also create 10 identical test
functions, so that we get 10 different backtraces; this is useful
when we want to test whether we can detect all the latencies in a
burst. Otherwise, there would be no easy way of differentiating
between which latency in a burst was captured by the tracer.
In addition, there is a sysfs trigger, so that it's not necessary to
reload the module to repeat the test. The trigger will appear as
/sys/kernel/preemptirq_delay_test/trigger in sysfs.
Link: http://lkml.kernel.org/r/20191008220824.7911-3-viktor.rosendahl@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Viktor Rosendahl (BMW) <viktor.rosendahl@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch implements the feature that the tracing_max_latency file,
e.g. /sys/kernel/debug/tracing/tracing_max_latency will receive
notifications through the fsnotify framework when a new latency is
available.
One particularly interesting use of this facility is when enabling
threshold tracing, through /sys/kernel/debug/tracing/tracing_thresh,
together with the preempt/irqsoff tracers. This makes it possible to
implement a user space program that can, with equal probability,
obtain traces of latencies that occur immediately after each other in
spite of the fact that the preempt/irqsoff tracers operate in overwrite
mode.
This facility works with the hwlat, preempt/irqsoff, and wakeup
tracers.
The tracers may call the latency_fsnotify() from places such as
__schedule() or do_idle(); this makes it impossible to call
queue_work() directly without risking a deadlock. The same would
happen with a softirq, kernel thread or tasklet. For this reason we
use the irq_work mechanism to call queue_work().
This patch creates a new workqueue. The reason for doing this is that
I wanted to use the WQ_UNBOUND and WQ_HIGHPRI flags. My thinking was
that WQ_UNBOUND might help with the latency in some important cases.
If we use:
queue_work(system_highpri_wq, &tr->fsnotify_work);
then the work will (almost) always execute on the same CPU but if we are
unlucky that CPU could be too busy while there could be another CPU in
the system that would be able to process the work soon enough.
queue_work_on() could be used to queue the work on another CPU but it
seems difficult to select the right CPU.
Link: http://lkml.kernel.org/r/20191008220824.7911-2-viktor.rosendahl@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Viktor Rosendahl (BMW) <viktor.rosendahl@gmail.com>
[ Added max() to have one compare for max latency ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Looking for ways to shrink the size of the dyn_ftrace structure, knowing the
information about how many pages and the number of groups of those pages, is
useful in working out the best ways to save on memory.
This adds one info print on how many groups of pages were used to allocate
the ftrace dyn_ftrace structures, and also shows the number of pages and
groups in the dyn_ftrace_total_info (which is used for debugging).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As testing for direct calls from the function graph tracer adds a little
overhead (which is a lot when tracing every function), add a counter that
can be used to test if function_graph tracer needs to test for a direct
caller or not.
It would have been nicer if we could use a static branch, but the static
branch logic fails when used within the function graph tracer trampoline.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As function_graph tracer modifies the return address to insert a trampoline
to trace the return of a function, it must be aware of a direct caller, as
when it gets called, the function's return address may not be at on the
stack where it expects. It may have to see if that return address points to
the a direct caller and adjust if it is.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add the start of the functionality to allow other trampolines to use the
ftrace mcount/fentry/nop location. This adds two new functions:
register_ftrace_direct() and unregister_ftrace_direct()
Both take two parameters: the first is the instruction address of where the
mcount/fentry/nop exists, and the second is the trampoline to have that
location called.
This will handle cases where ftrace is already used on that same location,
and will make it still work, where the registered direct called trampoline
will get called after all the registered ftrace callers are handled.
Currently, it will not allow for IP_MODIFY functions to be called at the
same locations, which include some kprobes and live kernel patching.
At this point, no architecture supports this. This is only the start of
implementing the framework.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since it stores CLOCK_BOOTTIME, not, as the name suggests,
CLOCK_REALTIME, let's rename ->real_start_time to ->start_bootime.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This changes "to the list" to "from the list" and also deletes the
obsolete comment about the "@nested" argument.
The "nested" argument was removed in this commit, earlier this year:
5facae4f35 ("locking/lockdep: Remove unused @nested argument from lock_release()").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20191104091252.GA31509@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
AUX data can be used to annotate perf events such as performance counters
or tracepoints/breakpoints by including it in sample records when
PERF_SAMPLE_AUX flag is set. Such samples would be instrumental in debugging
and profiling by providing, for example, a history of instruction flow
leading up to the event's overflow.
The implementation makes use of grouping an AUX event with all the events
that wish to take samples of the AUX data, such that the former is the
group leader. The samplees should also specify the desired size of the AUX
sample via attr.aux_sample_size.
AUX capable PMUs need to explicitly add support for sampling, because it
relies on a new callback to take a snapshot of the buffer without touching
the event states.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025140835.53665-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It looks like a "static inline" has been missed in front
of the empty definition of perf_cgroup_switch() under
certain configurations.
Fixes the following sparse warning:
kernel/events/core.c:1035:1: warning: symbol 'perf_cgroup_switch' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191106132527.19977-1-ben.dooks@codethink.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
313ccb9615 ("perf: Allocate context task_ctx_data for child event")
makes the inherit path skip over the current event in case of task_ctx_data
allocation failure. This, however, is inconsistent with allocation failures
in perf_event_alloc(), which would abort the fork.
Correct this by returning an error code on task_ctx_data allocation
failure and failing the fork in that case.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191105075702.60319-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit
ab43762ef0 ("perf: Allow normal events to output AUX data")
added 'aux_output' bit to the attribute structure, which relies on AUX
events and grouping, neither of which is supported for the kernel events.
This notwithstanding, attempts have been made to use it in the kernel
code, suggesting the necessity of an explicit hard -EINVAL.
Fix this by rejecting attributes with aux_output set for kernel events.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191030134731.5437-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A comment is in a wrong place in perf_event_create_kernel_counter().
Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191030134731.5437-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While discussing uncore event scheduling, I noticed we do not in fact
seem to dis-allow making uncore-cgroup events. Such events make no
sense what so ever because the cgroup is a CPU local state where
uncore counts across a number of CPUs.
Disallow them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While seemingly harmless, __sched_fork() does hrtimer_init(), which,
when DEBUG_OBJETS, can end up doing allocations.
This then results in the following lock order:
rq->lock
zone->lock.rlock
batched_entropy_u64.lock
Which in turn causes deadlocks when we do wakeups while holding that
batched_entropy lock -- as the random code does.
Solve this by moving __sched_fork() out from under rq->lock. This is
safe because nothing there relies on rq->lock, as also evident from the
other __sched_fork() callsite.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: bigeasy@linutronix.de
Cc: cl@linux.com
Cc: keescook@chromium.org
Cc: penberg@kernel.org
Cc: rientjes@google.com
Cc: thgarnie@google.com
Cc: tytso@mit.edu
Cc: will@kernel.org
Fixes: b7d5dc2107 ("random: add a spinlock_t to struct batched_entropy")
Link: https://lkml.kernel.org/r/20191001091837.GK4536@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 TSX Async Abort and iTLB Multihit mitigations from Thomas Gleixner:
"The performance deterioration departement is not proud at all of
presenting the seventh installment of speculation mitigations and
hardware misfeature workarounds:
1) TSX Async Abort (TAA) - 'The Annoying Affair'
TAA is a hardware vulnerability that allows unprivileged
speculative access to data which is available in various CPU
internal buffers by using asynchronous aborts within an Intel TSX
transactional region.
The mitigation depends on a microcode update providing a new MSR
which allows to disable TSX in the CPU. CPUs which have no
microcode update can be mitigated by disabling TSX in the BIOS if
the BIOS provides a tunable.
Newer CPUs will have a bit set which indicates that the CPU is not
vulnerable, but the MSR to disable TSX will be available
nevertheless as it is an architected MSR. That means the kernel
provides the ability to disable TSX on the kernel command line,
which is useful as TSX is a truly useful mechanism to accelerate
side channel attacks of all sorts.
2) iITLB Multihit (NX) - 'No eXcuses'
iTLB Multihit is an erratum where some Intel processors may incur
a machine check error, possibly resulting in an unrecoverable CPU
lockup, when an instruction fetch hits multiple entries in the
instruction TLB. This can occur when the page size is changed
along with either the physical address or cache type. A malicious
guest running on a virtualized system can exploit this erratum to
perform a denial of service attack.
The workaround is that KVM marks huge pages in the extended page
tables as not executable (NX). If the guest attempts to execute in
such a page, the page is broken down into 4k pages which are
marked executable. The workaround comes with a mechanism to
recover these shattered huge pages over time.
Both issues come with full documentation in the hardware
vulnerabilities section of the Linux kernel user's and administrator's
guide.
Thanks to all patch authors and reviewers who had the extraordinary
priviledge to be exposed to this nuisance.
Special thanks to Borislav Petkov for polishing the final TAA patch
set and to Paolo Bonzini for shepherding the KVM iTLB workarounds and
providing also the backports to stable kernels for those!"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/taa: Fix printing of TAA_MSG_SMT on IBRS_ALL CPUs
Documentation: Add ITLB_MULTIHIT documentation
kvm: x86: mmu: Recovery of shattered NX large pages
kvm: Add helper function for creating VM worker threads
kvm: mmu: ITLB_MULTIHIT mitigation
cpu/speculation: Uninline and export CPU mitigations helpers
x86/cpu: Add Tremont to the cpu vulnerability whitelist
x86/bugs: Add ITLB_MULTIHIT bug infrastructure
x86/tsx: Add config options to set tsx=on|off|auto
x86/speculation/taa: Add documentation for TSX Async Abort
x86/tsx: Add "auto" option to the tsx= cmdline parameter
kvm/x86: Export MDS_NO=0 to guests when TSX is enabled
x86/speculation/taa: Add sysfs reporting for TSX Async Abort
x86/speculation/taa: Add mitigation for TSX Async Abort
x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default
x86/cpu: Add a helper function x86_read_arch_cap_msr()
x86/msr: Add the IA32_TSX_CTRL MSR
cgroup ID is currently allocated using a dedicated per-hierarchy idr
and used internally and exposed through tracepoints and bpf. This is
confusing because there are tracepoints and other interfaces which use
the cgroupfs ino as IDs.
The preceding changes made kn->id exposed as ino as 64bit ino on
supported archs or ino+gen (low 32bits as ino, high gen). There's no
reason for cgroup to use different IDs. The kernfs IDs are unique and
userland can easily discover them and map them back to paths using
standard file operations.
This patch replaces cgroup IDs with kernfs IDs.
* cgroup_id() is added and all cgroup ID users are converted to use it.
* kernfs_node creation is moved to earlier during cgroup init so that
cgroup_id() is available during init.
* While at it, s/cgroup/cgrp/ in psi helpers for consistency.
* Fallback ID value is changed to 1 to be consistent with root cgroup
ID.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Each kernfs_node is identified with a 64bit ID. The low 32bit is
exposed as ino and the high gen. While this already allows using inos
as keys by looking up with wildcard generation number of 0, it's
adding unnecessary complications for 64bit ino archs which can
directly use kernfs_node IDs as inos to uniquely identify each cgroup
instance.
This patch exposes IDs directly as inos on 64bit ino archs. The
conversion is mostly straight-forward.
* 32bit ino archs behave the same as before. 64bit ino archs now use
the whole 64bit ID as ino and the generation number is fixed at 1.
* 64bit inos still use the same idr allocator which gurantees that the
lower 32bits identify the current live instance uniquely and the
high 32bits are incremented whenever the low bits wrap. As the
upper 32bits are no longer used as gen and we don't wanna start ino
allocation with 33rd bit set, the initial value for highbits
allocation is changed to 0 on 64bit ino archs.
* blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify
the issuing cgroup. Userland builds FILEID_INO32_GEN fids from
these numbers to look up the cgroups. To remain compatible with the
behavior, always output (LOW32,HIGH32) which will be constructed
back to the original 64bit ID by __kernfs_fh_to_dentry().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
kernfs_find_and_get_node_by_ino() looks the kernfs_node matching the
specified ino. On top of that, kernfs_get_node_by_id() and
kernfs_fh_get_inode() implement full ID matching by testing the rest
of ID.
On surface, confusingly, the two are slightly different in that the
latter uses 0 gen as wildcard while the former doesn't - does it mean
that the latter can't uniquely identify inodes w/ 0 gen? In practice,
this is a distinction without a difference because generation number
starts at 1. There are no actual IDs with 0 gen, so it can always
safely used as wildcard.
Let's simplify the code by renaming kernfs_find_and_get_node_by_ino()
to kernfs_find_and_get_node_by_id(), moving all lookup logics into it,
and removing now unnecessary kernfs_get_node_by_id().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value. I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to. Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.
This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper. Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen. This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>
ns_to_timespec64() calls div_s64_rem(), which is a rather slow function on
32-bit architectures, as it cannot take advantage of the do_div()
optimizations for constant arguments.
Open-code the div_s64_rem() function in ns_to_timespec64(), so a constant
divider can be passed into the optimized div_u64_rem() function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108203435.112759-3-arnd@arndb.de
A cast to 'time_t' was accidentally left in place during the
conversion of __do_adjtimex() to 64-bit timestamps, so the
resulting value is incorrectly truncated.
Remove the cast so the 64-bit time gets propagated correctly.
Fixes: ead25417f8 ("timex: use __kernel_timex internally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191108203435.112759-2-arnd@arndb.de
Currently, the cpuidle subsystem uses microseconds as the unit of
time which (among other things) causes the idle loop to incur some
integer division overhead for no clear benefit.
In order to allow cpuidle to measure time in nanoseconds, add two
new fields, exit_latency_ns and target_residency_ns, to represent the
exit latency and target residency of an idle state in nanoseconds,
respectively, to struct cpuidle_state and initialize them with the
help of the corresponding values in microseconds provided by drivers.
Additionally, change cpuidle_governor_latency_req() to return the
idle state exit latency constraint in nanoseconds.
Also meeasure idle state residency (last_residency_ns in struct
cpuidle_device and time_ns in struct cpuidle_driver) in nanoseconds
and update the cpuidle core and governors accordingly.
However, the menu governor still computes typical intervals in
microseconds to avoid integer overflows.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Pull cgroup fix from Tejun Heo:
"There's an inadvertent preemption point in ptrace_stop() which was
reliably triggering for a test scenario significantly slowing it down.
This contains Oleg's fix to remove the unwanted preemption point"
* 'for-5.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: freezer: call cgroup_enter_frozen() with preemption disabled in ptrace_stop()
This comment block explains why include/generated/compile.h is omitted,
but nothing about include/generated/autoconf.h, which might be more
difficult to understand. Add more comments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'pushd' ... 'popd' is the last bash-specific code in this script.
One way to avoid it is to run the code in a sub-shell.
With that addressed, you can run this script with sh.
I replaced $(BASH) with $(CONFIG_SHELL), and I changed the hashbang
to #!/bin/sh.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This script copies headers by the cpio command twice; first from
srctree, and then from objtree. However, when we building in-tree,
we know the srctree and the objtree are the same. That is, all the
headers copied by the first cpio are overwritten by the second one.
Skip the first cpio when we are building in-tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This script computes md5sum of headers in srctree and in objtree.
However, when we are building in-tree, we know the srctree and the
objtree are the same. That is, we end up with the same computation
twice. In fact, the first two lines of kernel/kheaders.md5 are always
the same for in-tree builds.
Unify the two md5sum calculations.
For in-tree builds ($building_out_of_srctree is empty), we check
only two directories, "include", and "arch/$SRCARCH/include".
For out-of-tree builds ($building_out_of_srctree is 1), we check
4 directories, "$srctree/include", "$srctree/arch/$SRCARCH/include",
"include", and "arch/$SRCARCH/include" since we know they are all
different.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'head' and 'tail' commands can take a file path directly.
So, you do not need to run 'cat'.
cat kernel/kheaders.md5 | head -1
... is equivalent to:
head -1 kernel/kheaders.md5
and the latter saves forking one process.
While I was here, I replaced 'head -1' with 'head -n 1'.
I also replaced '==' with '=' since we do not have a good reason to
use the bashism.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With modern NIC, it is not unusual having about ~256,000 active dma
mappings and a hash size of 1024 buckets is too small.
Forcing full cache line per bucket does not seem useful, especially now
that we have contention on free_entries_lock for allocations and freeing
of entries. Better use the space to fit more buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move all fields used during exact match lookups to the first cache line.
This makes debug_dma_mapping_error() and friends about 50% faster.
Since it removes two 32bit holes, force a cacheline alignment on struct
dma_debug_entry.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Integrate the generic dma remapping implementation into the main flow.
This prepares for architectures like xtensa that use an uncached
segment for pages in the kernel mapping, but can also remap highmem
from CMA. To simplify that implementation we now always deduct the
page from the physical address via the DMA address instead of the
virtual address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode. Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook. Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables. This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
My commit b0c51f1584 ("stacktrace: Don't skip first entry on
noncurrent tasks") adds one or zero to skipnr by "!!(current == tsk)".
But the C99 standard says:
The == (equal to) and != (not equal to) operators are
...
Each of the operators yields 1 if the specified relation is true and 0
if it is false.
So there is no need to prepend the above expression by "!!" -- remove it.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111092647.27419-1-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of fetching the value of flags and perform an xchg() to clear
a bit, just use atomic_fetch_andnot() that is more suitable to do that
job in one operation while keeping the full ordering.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-4-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When irq_work_claim() finds IRQ_WORK_PENDING flag already set, we just
return and don't raise a new IPI. We expect the destination to see
and handle our latest updades thanks to the pairing atomic_xchg()
in irq_work_run_list().
But cmpxchg() doesn't guarantee a full memory barrier upon failure. So
it's possible that the destination misses our latest updates.
So use atomic_fetch_or() instead that is unconditionally fully ordered
and also performs exactly what we want here and simplify the code.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-3-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We need to convert flags to atomic_t in order to later fix an ordering
issue on atomic_cmpxchg() failure. This will allow us to use atomic_fetch_or().
Also clarify the nature of those flags.
[ mingo: Converted two more usage site the original patch missed. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ever since we moved the sched_class definitions into their own files,
the constant expression {fair,idle}_sched_class.pick_next_task() is
not in fact a compile time constant anymore and results in an indirect
call (barring LTO).
Fix that by exposing pick_next_task_{fair,idle}() directly, this gets
rid of the indirect call (and RETPOLINE) on the fast path.
Also remove the unlikely() from the idle case, it is in fact /the/ way
we select idle -- and that is a very common thing to do.
Performance for will-it-scale/sched_yield improves by 2% (as reported
by 0-day).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: ktkhai@virtuozzo.com
Cc: mgorman@suse.de
Cc: qais.yousef@arm.com
Cc: qperret@google.com
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20191108131909.603037345@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for timekeepoing and clocksource drivers:
- VDSO data was updated conditional on the availability of a VDSO
capable clocksource. This causes the VDSO functions which do not
depend on a VDSO capable clocksource to operate on stale data.
Always update unconditionally.
- Prevent a double free in the mediatek driver
- Use the proper helper in the sh_mtu2 driver so it won't attempt to
initialize non-existing interrupts"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Update VDSO data unconditionally
clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
clocksource/drivers/mediatek: Fix error handling
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for scheduler regressions:
- Plug a subtle race condition which was introduced with the rework
of the next task selection functionality. The change of task
properties became unprotected which can be observed inconsistently
causing state corruption.
- A trivial compile fix for CONFIG_CGROUPS=n"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix pick_next_task() vs 'change' pattern race
sched/core: Fix compilation error when cgroup not selected
Pull irq fixlet from Thomas Gleixner:
"A trivial fix for a kernel doc regression where an argument change was
not reflected in the documentation"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
Pull stacktrace fix from Thomas Gleixner:
"A small fix for a stacktrace regression.
Saving a stacktrace for a foreign task skipped an extra entry which
makes e.g. the output of /proc/$PID/stack incomplete"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stacktrace: Don't skip first entry on noncurrent tasks
if the child has been negative and just went positive
under us, we want coherent d_is_positive() and ->d_inode.
Don't unlock the parent until we'd done that work...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the caller of ->get_tree() expects NULL left there on error...
Reported-by: Thibaut Sautereau <thibaut@sautereau.fr>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
Commit 67692435c4 ("sched: Rework pick_next_task() slow-path")
inadvertly introduced a race because it changed a previously
unexplored dependency between dropping the rq->lock and
sched_class::put_prev_task().
The comments about dropping rq->lock, in for example
newidle_balance(), only mentions the task being current and ->on_cpu
being set. But when we look at the 'change' pattern (in for example
sched_setnuma()):
queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */
running = task_current(rq, p); /* rq->curr == p */
if (queued)
dequeue_task(...);
if (running)
put_prev_task(...);
/* change task properties */
if (queued)
enqueue_task(...);
if (running)
set_next_task(...);
It becomes obvious that if we do this after put_prev_task() has
already been called on @p, things go sideways. This is exactly what
the commit in question allows to happen when it does:
prev->sched_class->put_prev_task(rq, prev, rf);
if (!rq->nr_running)
newidle_balance(rq, rf);
The newidle_balance() call will drop rq->lock after we've called
put_prev_task() and that allows the above 'change' pattern to
interleave and mess up the state.
Furthermore, it turns out we lost the RT-pull when we put the last DL
task.
Fix both problems by extracting the balancing from put_prev_task() and
doing a multi-class balance() pass before put_prev_task().
Fixes: 67692435c4 ("sched: Rework pick_next_task() slow-path")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Quentin Perret <qperret@google.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
When cgroup is disabled the following compilation error was hit
kernel/sched/core.c: In function ‘uclamp_update_active_tasks’:
kernel/sched/core.c:1081:23: error: storage size of ‘it’ isn’t known
struct css_task_iter it;
^~
kernel/sched/core.c:1084:2: error: implicit declaration of function ‘css_task_iter_start’; did you mean ‘__sg_page_iter_start’? [-Werror=implicit-function-declaration]
css_task_iter_start(css, 0, &it);
^~~~~~~~~~~~~~~~~~~
__sg_page_iter_start
kernel/sched/core.c:1085:14: error: implicit declaration of function ‘css_task_iter_next’; did you mean ‘__sg_page_iter_next’? [-Werror=implicit-function-declaration]
while ((p = css_task_iter_next(&it))) {
^~~~~~~~~~~~~~~~~~
__sg_page_iter_next
kernel/sched/core.c:1091:2: error: implicit declaration of function ‘css_task_iter_end’; did you mean ‘get_task_cred’? [-Werror=implicit-function-declaration]
css_task_iter_end(&it);
^~~~~~~~~~~~~~~~~
get_task_cred
kernel/sched/core.c:1081:23: warning: unused variable ‘it’ [-Wunused-variable]
struct css_task_iter it;
^~
cc1: some warnings being treated as errors
make[2]: *** [kernel/sched/core.o] Error 1
Fix by protetion uclamp_update_active_tasks() with
CONFIG_UCLAMP_TASK_GROUP
Fixes: babbe170e0 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20191105112212.596-1-qais.yousef@arm.com
* for-next/elf-hwcap-docs:
: Update the arm64 ELF HWCAP documentation
docs/arm64: cpu-feature-registers: Rewrite bitfields that don't follow [e, s]
docs/arm64: cpu-feature-registers: Documents missing visible fields
docs/arm64: elf_hwcaps: Document HWCAP_SB
docs/arm64: elf_hwcaps: sort the HWCAP{, 2} documentation by ascending value
* for-next/smccc-conduit-cleanup:
: SMC calling convention conduit clean-up
firmware: arm_sdei: use common SMCCC_CONDUIT_*
firmware/psci: use common SMCCC_CONDUIT_*
arm: spectre-v2: use arm_smccc_1_1_get_conduit()
arm64: errata: use arm_smccc_1_1_get_conduit()
arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()
* for-next/zone-dma:
: Reintroduction of ZONE_DMA for Raspberry Pi 4 support
arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
dma/direct: turn ARCH_ZONE_DMA_BITS into a variable
arm64: Make arm64_dma32_phys_limit static
arm64: mm: Fix unused variable warning in zone_sizes_init
mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type'
arm64: use both ZONE_DMA and ZONE_DMA32
arm64: rename variables used to calculate ZONE_DMA32's size
arm64: mm: use arm64_dma_phys_limit instead of calling max_zone_dma_phys()
* for-next/relax-icc_pmr_el1-sync:
: Relax ICC_PMR_EL1 (GICv3) accesses when ICC_CTLR_EL1.PMHE is clear
arm64: Document ICC_CTLR_EL3.PMHE setting requirements
arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear
* for-next/double-page-fault:
: Avoid a double page fault in __copy_from_user_inatomic() if hw does not support auto Access Flag
mm: fix double page fault on arm64 if PTE_AF is cleared
x86/mm: implement arch_faults_on_old_pte() stub on x86
arm64: mm: implement arch_faults_on_old_pte() on arm64
arm64: cpufeature: introduce helper cpu_has_hw_af()
* for-next/misc:
: Various fixes and clean-ups
arm64: kpti: Add NVIDIA's Carmel core to the KPTI whitelist
arm64: mm: Remove MAX_USER_VA_BITS definition
arm64: mm: simplify the page end calculation in __create_pgd_mapping()
arm64: print additional fault message when executing non-exec memory
arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()
arm64: pgtable: Correct typo in comment
arm64: docs: cpu-feature-registers: Document ID_AA64PFR1_EL1
arm64: cpufeature: Fix typos in comment
arm64/mm: Poison initmem while freeing with free_reserved_area()
arm64: use generic free_initrd_mem()
arm64: simplify syscall wrapper ifdeffery
* for-next/kselftest-arm64-signal:
: arm64-specific kselftest support with signal-related test-cases
kselftest: arm64: fake_sigreturn_misaligned_sp
kselftest: arm64: fake_sigreturn_bad_size
kselftest: arm64: fake_sigreturn_duplicated_fpsimd
kselftest: arm64: fake_sigreturn_missing_fpsimd
kselftest: arm64: fake_sigreturn_bad_size_for_magic0
kselftest: arm64: fake_sigreturn_bad_magic
kselftest: arm64: add helper get_current_context
kselftest: arm64: extend test_init functionalities
kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
kselftest: arm64: mangle_pstate_invalid_daif_bits
kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
kselftest: arm64: extend toplevel skeleton Makefile
* for-next/kaslr-diagnostics:
: Provide diagnostics on boot for KASLR
arm64: kaslr: Check command line before looking for a seed
arm64: kaslr: Announce KASLR status on boot
Create a new function called lookup_rec() from the functionality of
ftrace_location_range(). The difference between lookup_rec() is that it
returns the record that it finds, where as ftrace_location_range() returns
only if it found a match or not.
The lookup_rec() is static, and can be used for new functionality where
ftrace needs to find a record of a specific address.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Most of the functionality of __ftrace_hash_move() can be reused, but not all
of it. That is, __ftrace_hash_move() is used to simply make a new hash from
an existing one, using the same size as the original. Creating a dup_hash(),
where we can specify a new size will be useful when we want to create a hash
with a default size, or simply copy the old one.
Signed-off-by: Steven Rostedt (VMWare) <rostedt@goodmis.org>
This patch adds array support to btf_struct_access().
It supports array of int, array of struct and multidimensional
array.
It also allows using u8[] as a scratch space. For example,
it allows access the "char cb[48]" with size larger than
the array's element "char". Another potential use case is
"u64 icsk_ca_priv[]" in the tcp congestion control.
btf_resolve_size() is added to resolve the size of any type.
It will follow the modifier if there is any. Please
see the function comment for details.
This patch also adds the "off < moff" check at the beginning
of the for loop. It is to reject cases when "off" is pointing
to a "hole" in a struct.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191107180903.4097702-1-kafai@fb.com
We can just call dma_free_contiguous directly instead of wrapping it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
It's not necessary to adjust the task state and revisit the state
of source and destination cgroups if the cgroups are not in freeze
state and the task itself is not frozen.
And in this scenario, it wakes up the task who's not supposed to be
ready to run.
Don't do the unnecessary task state adjustment can help stop waking
up the task without a reason.
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Initialize the cpufreq governors earlier to allow for earlier
performance control during the boot process.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/b98eae9b44eb2f034d7f5d12a161f5f831be1eb7.1571656015.git.amit.kucheria@linaro.org
In the bpf interpreter mode, bpf_probe_read_kernel is used to read
from PTR_TO_BTF_ID's kernel object. It currently missed considering
the insn->off. This patch fixes it.
Fixes: 2a02759ef5 ("bpf: Add support for BTF pointers to interpreter")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191107014640.384083-1-kafai@fb.com
We need to drop the bpf_devs_lock on error before returning.
Fixes: 9fd7c55591 ("bpf: offload: aggregate offloads per-device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191104091536.GB31509@mwanda
cgroup->bstat_pending is used to determine the base stat delta to
propagate to the parent. While correct, this is different from how
percpu delta is determined for no good reason and the inconsistency
makes the code more difficult to understand.
This patch makes parent propagation delta calculation use the same
method as percpu to global propagation.
* cgroup_base_stat_accumulate() is renamed to cgroup_base_stat_add()
and cgroup_base_stat_sub() is added.
* percpu propagation calculation is updated to use the above helpers.
* cgroup->bstat_pending is replaced with cgroup->last_bstat and
updated to use the same calculation as percpu propagation.
Signed-off-by: Tejun Heo <tj@kernel.org>
When using patchable-function-entry, the compiler will record the
callsites into a section named "__patchable_function_entries" rather
than "__mcount_loc". Let's abstract this difference behind a new
FTRACE_CALLSITE_SECTION, so that architectures don't have to handle this
explicitly (e.g. with custom module linker scripts).
As parisc currently handles this explicitly, it is fixed up accordingly,
with its custom linker script removed. Since FTRACE_CALLSITE_SECTION is
only defined when DYNAMIC_FTRACE is selected, the parisc module loading
code is updated to only use the definition in that case. When
DYNAMIC_FTRACE is not selected, modules shouldn't have this section, so
this removes some redundant work in that case.
To make sure that this is keep up-to-date for modules and the main
kernel, a comment is added to vmlinux.lds.h, with the existing ifdeffery
simplified for legibility.
I built parisc generic-{32,64}bit_defconfig with DYNAMIC_FTRACE enabled,
and verified that the section made it into the .ko files for modules.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Tested-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Torsten Duwe <duwe@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: linux-parisc@vger.kernel.org
Architectures may need to perform special initialization of ftrace
callsites, and today they do so by special-casing ftrace_make_nop() when
the expected branch address is MCOUNT_ADDR. In some cases (e.g. for
patchable-function-entry), we don't have an mcount-like symbol and don't
want a synthetic MCOUNT_ADDR, but we may need to perform some
initialization of callsites.
To make it possible to separate initialization from runtime
modification, and to handle cases without an mcount-like symbol, this
patch adds an optional ftrace_init_nop() function that architectures can
implement, which does not pass a branch address.
Where an architecture does not provide ftrace_init_nop(), we will fall
back to the existing behaviour of calling ftrace_make_nop() with
MCOUNT_ADDR.
At the same time, ftrace_code_disable() is renamed to
ftrace_nop_initialize() to make it clearer that it is intended to
intialize a callsite into a disabled state, and is not for disabling a
callsite that has been runtime enabled. The kerneldoc description of rec
arguments is updated to cover non-mcount callsites.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Tested-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Torsten Duwe <duwe@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2019-11-02
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 6 day(s) which contain
a total of 8 files changed, 35 insertions(+), 9 deletions(-).
The main changes are:
1) Fix ppc BPF JIT's tail call implementation by performing a second pass
to gather a stable JIT context before opcode emission, from Eric Dumazet.
2) Fix build of BPF samples sys_perf_event_open() usage to compiled out
unavailable test_attr__{enabled,open} checks. Also fix potential overflows
in bpf_map_{area_alloc,charge_init} on 32 bit archs, from Björn Töpel.
3) Fix narrow loads of bpf_sysctl context fields with offset > 0 on big endian
archs like s390x and also improve the test coverage, from Ilya Leoshkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXcGMxwAKCRCRxhvAZXjc
otEzAP9lHvP97TtRG9gP6dj6YovZ5Djdo3IscmkTqy5Nt8sVNQD+NWg1LZnSMFdJ
ExETgRVlsjF8q2sblswtn/8Ab53O6AM=
=RVGl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 stack argument update from Christian Brauner:
"This changes clone3() to do basic stack validation and to set up the
stack depending on whether or not it is growing up or down.
With clone3() the expectation is now very simply that the .stack
argument points to the lowest address of the stack and that
.stack_size specifies the initial stack size. This is diferent from
legacy clone() where the "stack" argument had to point to the lowest
or highest address of the stack depending on the architecture.
clone3() was released with 5.3. Currently, it is not documented and
very unclear to userspace how the stack and stack_size argument have
to be passed. After talking to glibc folks we concluded that changing
clone3() to determine stack direction and doing basic validation is
the right course of action.
Note, this is a potentially user visible change. In the very unlikely
case, that it breaks someone's use-case we will revert. (And then e.g.
place the new behavior under an appropriate flag.)
Note that passing an empty stack will continue working just as before.
Breaking someone's use-case is very unlikely. Neither glibc nor musl
currently expose a wrapper for clone3(). There is currently also no
real motivation for anyone to use clone3() directly. First, because
using clone{3}() with stacks requires some assembly (see glibc and
musl). Second, because it does not provide features that legacy
clone() doesn't. New features for clone3() will first happen in v5.5
which is why v5.4 is still a good time to try and make that change now
and backport it to v5.3.
I did a codesearch on https://codesearch.debian.net, github, and
gitlab and could not find any software currently relying directly on
clone3(). I expect this to change once we land CLONE_CLEAR_SIGHAND
which was a request coming from glibc at which point they'll likely
start using it"
* tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
clone3: validate stack arguments
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.
Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:
#define __STACK_SIZE (8 * 1024 * 1024)
pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd)
{
pid_t ret;
void *stack;
stack = malloc(__STACK_SIZE);
if (!stack)
return -ENOMEM;
#ifdef __ia64__
ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#elif defined(__parisc__) /* stack grows up */
ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd);
#else
ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#endif
return ret;
}
or even crazier variants such as [3].
With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.
/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().
[1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com
[2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein
[3]: 5238e95759/src/basic/raw-clone.h (L31)
[4]: https://codesearch.debian.net
Fixes: 7f192e3cd3 ("fork: add clone3")
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-api@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 5.3
Cc: GNU C Library <libc-alpha@sourceware.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20191031113608.20713-1-christian.brauner@ubuntu.com
A recent commit changed a parameter of __irq_domain_alloc_fwnode(), but
did not update the documentation comment. Fix it up.
Fixes: b977fcf477 ("irqdomain/debugfs: Use PAs to generate fwnode names")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1571476047-29463-1-git-send-email-wang.yi59@zte.com.cn
The update of the VDSO data is depending on __arch_use_vsyscall() returning
True. This is a leftover from the attempt to map the features of various
architectures 1:1 into generic code.
The usage of __arch_use_vsyscall() in the actual vsyscall implementations
got dropped and replaced by the requirement for the architecture code to
return U64_MAX if the global clocksource is not usable in the VDSO.
But the __arch_use_vsyscall() check in the update code stayed which causes
the VDSO data to be stale or invalid when an architecture actually
implements that function and returns False when the current clocksource is
not usable in the VDSO.
As a consequence the VDSO implementations of clock_getres(), time(),
clock_gettime(CLOCK_.*_COARSE) operate on invalid data and return bogus
information.
Remove the __arch_use_vsyscall() check from the VDSO update function and
update the VDSO data unconditionally.
[ tglx: Massaged changelog and removed the now useless implementations in
asm-generic/ARM64/MIPS ]
Fixes: 44f57d788e ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1571887709-11447-1-git-send-email-chenhc@lemote.com
When doing cat /proc/<PID>/stack, the output is missing the first entry.
When the current code walks the stack starting in stack_trace_save_tsk,
it skips all scheduler functions (that's OK) plus one more function. But
this one function should be skipped only for the 'current' task as it is
stack_trace_save_tsk proper.
The original code (before the common infrastructure) skipped one
function only for the 'current' task -- see save_stack_trace_tsk before
3599fe12a1. So do so also in the new infrastructure now.
Fixes: 214d8ca6ee ("stacktrace: Provide common infrastructure")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20191030072545.19462-1-jslaby@suse.cz
Livepatch uses ftrace for redirection to new patched functions. It means
that if ftrace is disabled, all live patched functions are disabled as
well. Toggling global 'ftrace_enabled' sysctl thus affect it directly.
It is not a problem per se, because only administrator can set sysctl
values, but it still may be surprising.
Introduce PERMANENT ftrace_ops flag to amend this. If the
FTRACE_OPS_FL_PERMANENT is set on any ftrace ops, the tracing cannot be
disabled by disabling ftrace_enabled. Equally, a callback with the flag
set cannot be registered if ftrace_enabled is disabled.
Link: http://lkml.kernel.org/r/20191016113316.13415-2-mbenes@suse.cz
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A kernel module may need to check the value of the "mitigations=" kernel
command line parameter as part of its setup when the module needs
to perform software mitigations for a CPU flaw.
Uninline and export the helper functions surrounding the cpu_mitigations
enum to allow for their usage from a module.
Lastly, privatize the enum and cpu_mitigations variable since the value of
cpu_mitigations can be checked with the exported helper functions.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-11-02
The following pull-request contains BPF updates for your *net-next* tree.
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 41 files changed, 1864 insertions(+), 474 deletions(-).
The main changes are:
1) Fix long standing user vs kernel access issue by introducing
bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel.
2) Accelerated xskmap lookup, from Björn and Maciej.
3) Support for automatic map pinning in libbpf, from Toke.
4) Cleanup of BTF-enabled raw tracepoints, from Alexei.
5) Various fixes to libbpf and selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 2a02759ef5 ("bpf: Add support for BTF pointers to interpreter")
explicitly states that the pointer to BTF object is a pointer to a kernel
object or NULL. Therefore we should also switch to using the strict kernel
probe helper which is restricted to kernel addresses only when architectures
have non-overlapping address spaces.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/d2b90827837685424a4b8008dfe0460558abfada.1572649915.git.daniel@iogearbox.net
The current bpf_probe_read() and bpf_probe_read_str() helpers are broken
in that they assume they can be used for probing memory access for kernel
space addresses /as well as/ user space addresses.
However, plain use of probe_kernel_read() for both cases will attempt to
always access kernel space address space given access is performed under
KERNEL_DS and some archs in-fact have overlapping address spaces where a
kernel pointer and user pointer would have the /same/ address value and
therefore accessing application memory via bpf_probe_read{,_str}() would
read garbage values.
Lets fix BPF side by making use of recently added 3d7081822f ("uaccess:
Add non-pagefault user-space read functions"). Unfortunately, the only way
to fix this status quo is to add dedicated bpf_probe_read_{user,kernel}()
and bpf_probe_read_{user,kernel}_str() helpers. The bpf_probe_read{,_str}()
helpers are kept as-is to retain their current behavior.
The two *_user() variants attempt the access always under USER_DS set, the
two *_kernel() variants will -EFAULT when accessing user memory if the
underlying architecture has non-overlapping address ranges, also avoiding
throwing the kernel warning via 00c42373d3 ("x86-64: add warning for
non-canonical user access address dereferences").
Fixes: a5e8c07059 ("bpf: add bpf_probe_read_str helper")
Fixes: 2541517c32 ("tracing, perf: Implement BPF programs attached to kprobes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/796ee46e948bc808d54891a1108435f8652c6ca4.1572649915.git.daniel@iogearbox.net
Convert the bpf_probe_write_user() helper to probe_user_write() such that
writes are not attempted under KERNEL_DS anymore which is buggy as kernel
and user space pointers can have overlapping addresses. Also, given we have
the access_ok() check inside probe_user_write(), the helper doesn't need
to do it twice.
Fixes: 96ae522795 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/841c461781874c07a0ee404a454c3bc0459eed30.1572649915.git.daniel@iogearbox.net
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
In this commit the XSKMAP entry lookup function used by the XDP
redirect code is moved from the xskmap.c file to the xdp_sock.h
header, so the lookup can be inlined from, e.g., the
bpf_xdp_redirect_map() function.
Further the __xsk_map_redirect() and __xsk_map_flush() is moved to the
xsk.c, which lets the compiler inline the xsk_rcv() and xsk_flush()
functions.
Finally, all the XDP socket functions were moved from linux/bpf.h to
net/xdp_sock.h, where most of the XDP sockets functions are anyway.
This yields a ~2% performance boost for the xdpsock "rx_drop"
scenario.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101110346.15004-4-bjorn.topel@gmail.com
Inline the xsk_map_lookup_elem() via implementing the map_gen_lookup()
callback. This results in emitting the bpf instructions in place of
bpf_map_lookup_elem() helper call and better performance of bpf
programs.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/20191101110346.15004-3-bjorn.topel@gmail.com
Prior this commit, the array storing XDP socket instances were stored
in a separate allocated array of the XSKMAP. Now, we store the sockets
as a flexible array member in a similar fashion as the arraymap. Doing
so, we do less pointer chasing in the lookup.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/20191101110346.15004-2-bjorn.topel@gmail.com
Fix two pointer-to-int-cast warnings when compiling for the 32-bit parisc
platform:
kernel/kexec_file.c: In function ‘crash_prepare_elf64_headers’:
kernel/kexec_file.c:1307:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
phdr->p_vaddr = (Elf64_Addr)_text;
^
kernel/kexec_file.c:1324:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
phdr->p_vaddr = (unsigned long long) __va(mstart);
^
Signed-off-by: Helge Deller <deller@gmx.de>
Pull scheduler fixes from Ingo Molnar:
"Fix two scheduler topology bugs/oversights on Juno r0 2+4 big.LITTLE
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Allow sched_asym_cpucapacity to be disabled
sched/topology: Don't try to build empty sched domains
The atomic replace runs pre/post (un)install callbacks only from the new
livepatch. There are several reasons for this:
+ Simplicity: clear ordering of operations, no interactions between
old and new callbacks.
+ Reliability: only new livepatch knows what changes can already be made
by older livepatches and how to take over the state.
+ Testing: the atomic replace can be properly tested only when a newer
livepatch is available. It might be too late to fix unwanted effect
of callbacks from older livepatches.
It might happen that an older change is not enough and the same system
state has to be modified another way. Different changes need to get
distinguished by a version number added to struct klp_state.
The version can also be used to prevent loading incompatible livepatches.
The check is done when the livepatch is enabled. The rules are:
+ Any completely new system state modification is allowed.
+ System state modifications with the same or higher version are allowed
for already modified system states.
+ Cumulative livepatches must handle all system state modifications from
already installed livepatches.
+ Non-cumulative livepatches are allowed to touch already modified
system states.
Link: http://lkml.kernel.org/r/20191030154313.13263-4-pmladek@suse.com
To: Jiri Kosina <jikos@kernel.org>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: live-patching@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This is another step how to help maintaining more livepatches.
One big help was the atomic replace and cumulative livepatches. These
livepatches replace the already installed ones. Therefore it should
be enough when each cumulative livepatch is consistent.
The problems might come with shadow variables and callbacks. They might
change the system behavior or state so that it is no longer safe to
go back and use an older livepatch or the original kernel code. Also,
a new livepatch must be able to detect changes which were made by
the already installed livepatches.
This is where the livepatch system state tracking gets useful. It
allows to:
- find whether a system state has already been modified by
previous livepatches
- store data needed to manipulate and restore the system state
The information about the manipulated system states is stored in an
array of struct klp_state. It can be searched by two new functions
klp_get_state() and klp_get_prev_state().
The dependencies are going to be solved by a version field added later.
The only important information is that it will be allowed to modify
the same state by more non-cumulative livepatches. It is similar
to allowing to modify the same function several times. The livepatch
author is responsible for preventing incompatible changes.
Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com
To: Jiri Kosina <jikos@kernel.org>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: live-patching@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pre/post (un)patch callbacks might manipulate the system state. Cumulative
livepatches might need to take over the changes made by the replaced
ones. For this they might need to access some data stored or referenced
by the old livepatches.
Therefore the replaced livepatches have to stay around until post_patch()
callback is called. It is achieved by calling the free functions later.
It is the same location where disabled livepatches have already been
freed.
Link: http://lkml.kernel.org/r/20191030154313.13263-2-pmladek@suse.com
To: Jiri Kosina <jikos@kernel.org>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: live-patching@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Some architectures, notably ARM, are interested in tweaking this
depending on their runtime DMA addressing limitations.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The functions bpf_map_area_alloc() and bpf_map_charge_init() prior
this commit passed the size parameter as size_t. In this commit this
is changed to u64.
All users of these functions avoid size_t overflows on 32-bit systems,
by explicitly using u64 when calculating the allocation size and
memory charge cost. However, since the result was narrowed by the
size_t when passing size and cost to the functions, the overflow
handling was in vain.
Instead of changing all call sites to size_t and handle overflow at
the call site, the parameter is changed to u64 and checked in the
functions above.
Fixes: d407bd25a2 ("bpf: don't trigger OOM killer under pressure with map alloc")
Fixes: c85d69135a ("bpf: move memory size checks to bpf_map_charge_init()")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191029154307.23053-1-bjorn.topel@gmail.com
Add a wakeup call for a case whereby the caller already has the waitqueue
spinlock held. This can be used by pipes to alter the ring buffer indices
and issue a wakeup under the same spinlock.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The bpf program type raw_tp together with 'expected_attach_type'
was the most appropriate api to indicate BTF-enabled raw_tp programs.
But during development it became apparent that 'expected_attach_type'
cannot be used and new 'attach_btf_id' field had to be introduced.
Which means that the information is duplicated in two fields where
one of them is ignored.
Clean it up by introducing new program type where both
'expected_attach_type' and 'attach_btf_id' fields have
specific meaning.
In the future 'expected_attach_type' will be extended
with other attach points that have similar semantics to raw_tp.
This patch is replacing BTF-enabled BPF_PROG_TYPE_RAW_TRACEPOINT with
prog_type = BPF_RPOG_TYPE_TRACING
expected_attach_type = BPF_TRACE_RAW_TP
attach_btf_id = btf_id of raw tracepoint inside the kernel
Future patches will add
expected_attach_type = BPF_TRACE_FENTRY or BPF_TRACE_FEXIT
where programs have the same input context and the same helpers,
but different attach points.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191030223212.953010-2-ast@kernel.org
Pull RCU and LKMM changes from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- Dynamic tick (nohz) updates, perhaps most notably changes to
force the tick on when needed due to lengthy in-kernel execution
on CPUs on which RCU is waiting.
- Replace rcu_swap_protected() with rcu_prepace_pointer().
- Torture-test updates.
- Linux-kernel memory consistency model updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri reported crash when JIT is on, but net.core.bpf_jit_kallsyms is off.
bpf_prog_kallsyms_find() was skipping addr->bpf_prog resolution
logic in oops and stack traces. That's incorrect.
It should only skip addr->name resolution for 'cat /proc/kallsyms'.
That's what bpf_jit_kallsyms and bpf_jit_harden protect.
Fixes: 3dec541b2e ("bpf: Add support for BTF pointers to x86 JIT")
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191030233019.1187404-1-ast@kernel.org
"ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it
reads the wrong byte, which happens to have the expected value of 0.
Improve the test by seeking to the 4th byte and expecting 4 instead of
0.
This makes the latent problem apparent: the test attempts to read the
first byte of bpf_sysctl.file_pos, assuming this is the least-significant
byte, which is not the case on big-endian machines: a non-zero offset is
needed.
The point of the test is to verify narrow loads, so we cannot cheat our
way out by simply using BPF_W. The existence of the test means that such
loads have to be supported, most likely because llvm can generate them.
Fix the test by adding a big-endian variant, which uses an offset to
access the least-significant byte of bpf_sysctl.file_pos.
This reveals the final problem: verifier rejects accesses to bpf_sysctl
fields with offset > 0. Such accesses are already allowed for a wide
range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few.
Extend this support to bpf_sysctl by using bpf_ctx_range instead of
offsetof when matching field offsets.
Fixes: 7b146cebe3 ("bpf: Sysctl hook")
Fixes: e1550bfe0d ("bpf: Add file_pos field to bpf_sysctl ctx")
Fixes: 9a1027e525 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com
These parameters are only referenced by __init routine calls during
early boot so they should be marked as __initdata and __initconst
accordingly.
Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
debug_dma_dump_mappings() can take a lot of cpu cycles :
lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump
real 0m0.463s
user 0m0.003s
sys 0m0.459s
Let's add a cond_resched() to avoid holding cpu for too long.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Daniele reported that issue previously fixed in c41f9ea998
("drivers: dma-coherent: Account dma_pfn_offset when used with device
tree") reappear shortly after 43fc509c3e ("dma-coherent: introduce
interface for default DMA pool") where fix was accidentally dropped.
Lets put fix back in place and respect dma-ranges for reserved memory.
Fixes: 43fc509c3e ("dma-coherent: introduce interface for default DMA pool")
Reported-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Tested-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This commit replaces the use of rcu_swap_protected() with the more
intuitively appealing rcu_replace_pointer() as a step towards removing
rcu_swap_protected().
Link: https://lore.kernel.org/lkml/CAHk-=wiAsJLw1egFEE=Z7-GGtM6wcvtyytXZA1+BHqta4gg6Hw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
[ paulmck: From rcu_replace() to rcu_replace_pointer() per Ingo Molnar. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: <netdev@vger.kernel.org>
Cc: <bpf@vger.kernel.org>
New tools bring new warnings, and with v5.3 comes:
kernel/rcu/srcutree.c: warning: 'levelspread[<U aa0>]' may be used uninitialized in this function [-Wuninitialized]: => 121:34
This commit suppresses this warning by initializing the full array
to INT_MIN, which will result in failures should any out-of-bounds
references appear.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
We never set this to false. This probably doesn't affect most people's
runtime because GCC will automatically initialize it to false at certain
common optimization levels. But that behavior is related to a bug in
GCC and obviously should not be relied on.
Fixes: 5d6742b377 ("rcu/nocb: Use rcu_segcblist for no-CBs CPUs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU-specific resched_cpu() function sends a resched IPI to the
specified CPU, which can be used to force the tick on for a given
nohz_full CPU. This is needed when this nohz_full CPU is looping in the
kernel while blocking the current grace period. However, for the tick
to actually be forced on in all cases, that CPU's rcu_data structure's
->rcu_urgent_qs flag must be set beforehand. This commit therefore
causes rcu_implicit_dynticks_qs() to set this flag prior to invoking
resched_cpu() on a holdout nohz_full CPU.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because list_for_each_entry_rcu() can now check for holding a
lock as well as for being in an RCU read-side critical section,
this commit replaces the workqueue_sysfs_unregister() function's
use of assert_rcu_or_wq_mutex() and list_for_each_entry_rcu() with
list_for_each_entry_rcu() augmented with a lockdep_is_held() optional
argument.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
None of rcu_segcblist_set_len(), rcu_segcblist_add_len(), or
rcu_segcblist_xchg_len() are used outside of kernel/rcu/rcu_segcblist.c.
This commit therefore makes them static.
Fixes: eda669a6a2 ("rcu/nocb: Atomic ->len field in rcu_segcblist structure")
Signed-off-by: kbuild test robot <lkp@intel.com>
[ paulmck: "Fixes:" updated per Stephen Rothwell feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The return value of raw_tp programs is ignored by __bpf_trace_run()
that calls them. The verifier also allows any value to be returned.
For BTF-enabled raw_tp lets enforce 'return 0', so that return value
can be used for something in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191029032426.1206762-1-ast@kernel.org
This adds support for io-wq, a smaller and specialized thread pool
implementation. This is meant to replace workqueues for io_uring. Among
the reasons for this addition are:
- We can assign memory context smarter and more persistently if we
manage the life time of threads.
- We can drop various work-arounds we have in io_uring, like the
async_list.
- We can implement hashed work insertion, to manage concurrency of
buffered writes without needing a) an extra workqueue, or b)
needlessly making the concurrency of said workqueue very low
which hurts performance of multiple buffered file writers.
- We can implement cancel through signals, for cancelling
interruptible work like read/write (or send/recv) to/from sockets.
- We need the above cancel for being able to assign and use file tables
from a process.
- We can implement a more thorough cancel operation in general.
- We need it to move towards a syslet/threadlet model for even faster
async execution. For that we need to take ownership of the used
threads.
This list is just off the top of my head. Performance should be the
same, or better, at least that's what I've seen in my testing. io-wq
supports basic NUMA functionality, setting up a pool per node.
io-wq hooks up to the scheduler schedule in/out just like workqueue
and uses that to drive the need for more/less workers.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add warning checks if mutex_trylock() or mutex_unlock() are used in
IRQ contexts, under CONFIG_DEBUG_MUTEXES=y.
While the mutex rules and semantics are explicitly documented, this allows
to expose any abusers and robustifies the whole thing.
While trylock and unlock are non-blocking, calling from IRQ context
is still forbidden (lock must be within the same context as unlock).
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Link: https://lkml.kernel.org/r/20191025033634.3330-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since the original comment, we have moved to do the task
reference counting explicitly along with wake_q_add_safe().
Drop the now incorrect comment.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Link: https://lkml.kernel.org/r/20191023033450.6445-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kcpustat is not correctly supported on nohz_full CPUs. The tick doesn't
fire and the cputime therefore doesn't move forward. The issue has shown
up after the vanishing of the remaining 1Hz which has made the stall
visible.
We are solving that with checking the task running on a CPU through RCU
and reading its vtime delta that we add to the raw kcpustat values.
We make sure that we fetch a coherent raw-kcpustat/vtime-delta couple
sequence while checking that the CPU referred by the target vtime is the
correct one, under the locked vtime seqcount.
Only CPUTIME_SYSTEM is handled here as a start because it's the trivial
case. User and guest time will require more preparation work to
correctly handle niceness.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191025020303.19342-1-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Standardize the naming on top of the vtime_accounting_enabled_*() base.
Also make it clear we are checking the vtime state of the
*current* CPU with this function. We'll need to add an API to check that
state on remote CPUs as well, so we must disambiguate the naming.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191016025700.31277-9-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove the superfluous "is" in the middle of the name. We want to
standardize the naming so that it can be expanded through suffixes:
context_tracking_enabled()
context_tracking_enabled_cpu()
context_tracking_enabled_this_cpu()
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191016025700.31277-6-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Record guest as a VTIME state instead of guessing it from VTIME_SYS and
PF_VCPU. This is going to simplify the cputime read side especially as
its state machine is going to further expand in order to fully support
kcpustat on nohz_full.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191016025700.31277-4-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Record idle as a VTIME state instead of guessing it from VTIME_SYS and
is_idle_task(). This is going to simplify the cputime read side
especially as its state machine is going to further expand in order to
fully support kcpustat on nohz_full.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191016025700.31277-3-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order to compute the kcpustat delta on a nohz CPU, we'll need to
fetch the task running on that target. Checking that its vtime
state snapshot actually refers to the relevant target involves recording
that CPU under the seqcount locked on task switch.
This is a step toward making kcpustat moving forward on full nohz CPUs.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191016025700.31277-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The estimated utilization for a task:
util_est = max(util_avg, est.enqueue, est.ewma)
is defined based on:
- util_avg: the PELT defined utilization
- est.enqueued: the util_avg at the end of the last activation
- est.ewma: a exponential moving average on the est.enqueued samples
According to this definition, when a task suddenly changes its bandwidth
requirements from small to big, the EWMA will need to collect multiple
samples before converging up to track the new big utilization.
This slow convergence towards bigger utilization values is not
aligned to the default scheduler behavior, which is to optimize for
performance. Moreover, the est.ewma component fails to compensate for
temporarely utilization drops which spans just few est.enqueued samples.
To let util_est do a better job in the scenario depicted above, change
its definition by making util_est directly follow upward motion and
only decay the est.ewma on downward.
Signed-off-by: Patrick Bellasi <patrick.bellasi@matbug.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <qperret@google.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191023205630.14469-1-patrick.bellasi@matbug.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While the static key is correctly initialized as being disabled, it will
remain forever enabled once turned on. This means that if we start with an
asymmetric system and hotplug out enough CPUs to end up with an SMP system,
the static key will remain set - which is obviously wrong. We should detect
this and turn off things like misfit migration and capacity aware wakeups.
As Quentin pointed out, having separate root domains makes this slightly
trickier. We could have exclusive cpusets that create an SMP island - IOW,
the domains within this root domain will not see any asymmetry. This means
we can't just disable the key on domain destruction, we need to count how
many asymmetric root domains we have.
Consider the following example using Juno r0 which is 2+4 big.LITTLE, where
two identical cpusets are created: they both span both big and LITTLE CPUs:
asym0 asym1
[ ][ ]
L L B L L B
$ cgcreate -g cpuset:asym0
$ cgset -r cpuset.cpus=0,1,3 asym0
$ cgset -r cpuset.mems=0 asym0
$ cgset -r cpuset.cpu_exclusive=1 asym0
$ cgcreate -g cpuset:asym1
$ cgset -r cpuset.cpus=2,4,5 asym1
$ cgset -r cpuset.mems=0 asym1
$ cgset -r cpuset.cpu_exclusive=1 asym1
$ cgset -r cpuset.sched_load_balance=0 .
(the CPU numbering may look odd because on the Juno LITTLEs are CPUs 0,3-5
and bigs are CPUs 1-2)
If we make one of those SMP (IOW remove asymmetry) by e.g. hotplugging its
big core, we would end up with an SMP cpuset and an asymmetric cpuset - the
static key must remain set, because we still have one asymmetric root domain.
With the above example, this could be done with:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
Which would result in:
asym0 asym1
[ ][ ]
L L B L L
When both SMP and asymmetric cpusets are present, all CPUs will observe
sched_asym_cpucapacity being set (it is system-wide), but not all CPUs
observe asymmetry in their sched domain hierarchy:
per_cpu(sd_asym_cpucapacity, <any CPU in asym0>) == <some SD at DIE level>
per_cpu(sd_asym_cpucapacity, <any CPU in asym1>) == NULL
Change the simple key enablement to an increment, and decrement the key
counter when destroying domains that cover asymmetric CPUs.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hannes@cmpxchg.org
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: qperret@google.com
Cc: tj@kernel.org
Cc: vincent.guittot@linaro.org
Fixes: df054e8445 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")
Link: https://lkml.kernel.org/r/20191023153745.19515-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
include/linux/export.h has lots of code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS.
To improve the maintainability and readability, unify the
implementation.
When the symbol has no namespace, pass the empty string "" to
the 'ns' parameter.
The drawback of this change is, it grows the code size.
When the symbol has no namespace, sym->namespace was previously
NULL, but it is now an empty string "". So, it increases 1 byte
for every no namespace EXPORT_SYMBOL.
A typical kernel configuration has 10K exported symbols, so it
increases 10KB in rough estimation.
I did not come up with a good idea to refactor it without increasing
the code size.
I am not sure how big a deal it is, but at least include/linux/export.h
looks nicer.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[maennich: rebase on top of 3 fixes for the namespace feature]
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
If a nohz_full CPU is idle or executing in userspace, it makes good sense
to keep it out of RCU core processing. After all, the RCU grace-period
kthread can see its quiescent states and all of its callbacks are
offloaded, so there is nothing for RCU core processing to do.
However, if a nohz_full CPU is executing in kernel space, the RCU
grace-period kthread cannot do anything for it, so such a CPU must report
its own quiescent states. This commit therefore makes nohz_full CPUs
skip RCU core processing only if the scheduler-clock interrupt caught
them in idle or in userspace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 671a63517c ("rcu: Avoid unnecessary softirq when system
is idle") fixed a bug that could result in an indefinite number of
unnecessary invocations of the RCU_SOFTIRQ handler at the trailing edge
of a scheduler-clock interrupt. However, the fix introduced off-CPU
stores to ->core_needs_qs. These writes did not conflict with the
on-CPU stores because the CPU's leaf rcu_node structure's ->lock was
held across all such stores. However, the loads from ->core_needs_qs
were not promoted to READ_ONCE() and, worse yet, the code loading from
->core_needs_qs was written assuming that it was only ever updated by
the corresponding CPU. So operation has been robust, but only by luck.
This situation is therefore an accident waiting to happen.
This commit therefore takes a different approach. Instead of clearing
->core_needs_qs from the grace-period kthread's force-quiescent-state
processing, it modifies the rcu_pending() function to suppress the
rcu_sched_clock_irq() function's call to invoke_rcu_core() if there is no
grace period in progress. This avoids the infinite needless RCU_SOFTIRQ
handlers while still keeping all accesses to ->core_needs_qs local to
the corresponding CPU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In some cases, tracing shows that need_heavy_qs is still set even though
urgent_qs was cleared upon reporting of a quiescent state. One such
case is when the softirq reports that a CPU has passed quiescent state.
Commit 671a63517c ("rcu: Avoid unnecessary softirq when system is
idle") fixed a bug where core_needs_qs was not being cleared. In order
to avoid running into similar situations with the urgent-grace-period
flags, this commit causes rcu_disable_urgency_upon_qs(), previously
rcu_disable_tick_upon_qs(), to clear the urgency hints, ->rcu_urgent_qs
and ->rcu_need_heavy_qs. Note that it is possible for CPUs to go
offline with these urgency hints still set. This is handled because
rcu_disable_urgency_upon_qs() is also invoked during the online process.
Because these hints can be cleared both by the corresponding CPU and by
the grace-period kthread, this commit also adds a number of READ_ONCE()
and WRITE_ONCE() calls.
Tested overnight with rcutorture running for 60 minutes on all
configurations of RCU.
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
[ paulmck: Clear urgency flags in rcu_disable_urgency_upon_qs(). ]
[ paulmck: Remove ->core_needs_qs from the set cleared at quiescent state. ]
[ paulmck: Make rcu_disable_urgency_upon_qs static per kbuild test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is interrupt-exit code that forces on the tick for nohz_full CPUs
failing to respond to the current grace period in a timely fashion.
However, this code must compare ->dynticks_nmi_nesting to the value 2
in the interrupt-exit fastpath. This commit therefore moves this code
to the interrupt-entry fastpath, where a lighter-weight comparison to
zero may be used.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
[ paulmck: Apply Joel Fernandes TICK_DEP_MASK_RCU->TICK_DEP_BIT_RCU fix. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
CPUs running for long time periods in the kernel in nohz_full mode
might leave the scheduling-clock interrupt disabled for then full
duration of their in-kernel execution. This can (among other things)
delay grace periods. This commit therefore forces the tick back on
for any nohz_full CPU that is failing to pass through a quiescent state
upon return from interrupt, which the resched_cpu() will induce.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
[ paulmck: Clear ->rcu_forced_tick as reported by Joel Fernandes testing. ]
[ paulmck: Apply Joel Fernandes TICK_DEP_MASK_RCU->TICK_DEP_BIT_RCU fix. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently if sequences such as "\ehelp\r" are delivered to the console then
the h gets eaten by the escape handling code. Since pressing escape
becomes something of a nervous twitch for vi users (and that escape doesn't
have much effect at a shell prompt) it is more helpful to emit the 'h' than
the '\e'.
We don't simply choose to emit the final character for all escape sequences
since that will do odd things for unsupported escape sequences (in
other words we retain the existing behaviour once we see '\e[').
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191025073328.643-6-daniel.thompson@linaro.org
Currently if an escape timer is interrupted by a character from a
different input source then the new character is discarded and the
function returns '\e' (which will be discarded by the level above).
It is hard to see why this would ever be the desired behaviour.
Fix this to return the new character rather than the '\e'.
This is a bigger refactor than might be expected because the new
character needs to go through escape sequence detection.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191025073328.643-5-daniel.thompson@linaro.org
kdb_read() contains special case logic to force it exit after reading
a single character. We can remove all the special case logic by directly
calling the function to read a single character instead. This also
allows us to tidy up the function prototype which, because it now matches
getchar(), we can also rename in order to make its role clearer.
This does involve some extra code to handle btaprompt properly but we
don't mind the new lines of code here because the old code had some
interesting problems (bad newline handling, treating unexpected
characters like <cr>).
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191025073328.643-4-daniel.thompson@linaro.org
Currently kdb_read_get_key() contains complex control flow that, on
close inspection, turns out to be unnecessary. In particular:
1. It is impossible to enter the branch conditioned on (escape_delay == 1)
except when the loop enters with (escape_delay == 2) allowing us to
combine the branches.
2. Most of the code conditioned on (escape_delay == 2) simply modifies
local data and then breaks out of the loop causing the function to
return escape_data[0].
3. Based on #2 there is not actually any need to ever explicitly set
escape_delay to 2 because we it is much simpler to directly return
escape_data[0] instead.
4. escape_data[0] is, for all but one exit path, known to be '\e'.
Simplify the code based on these observations.
There is a subtle (and harmless) change of behaviour resulting from this
simplification: instead of letting the escape timeout after ~1998
milliseconds we now timeout after ~2000 milliseconds
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191025073328.643-3-daniel.thompson@linaro.org
kdb_read_get_key() has extremely complex break/continue control flow
managed by state variables and is very hard to review or modify. In
particular the way the escape sequence handling interacts with the
general control flow is hard to follow. Separate out the escape key
handling, without changing the control flow. This makes the main body of
the code easier to review.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191025073328.643-2-daniel.thompson@linaro.org
Andi reported that he was hitting the linear search in
perf_init_event() a lot. Now that all !TYPE_SOFTWARE events should hit
the IDR, make sure the TYPE_SOFTWARE events are at the head of the
list such that we'll quickly find the right PMU (provided a valid
event was given).
Signed-off-by: Liang, Kan <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi reported that he was hitting the linear search in
perf_init_event() a lot. Make more agressive use of the IDR lookup to
avoid hitting the linear search.
With exception of PERF_TYPE_SOFTWARE (which relies on a hideous hack),
we can put everything in the IDR. On top of that, we can alias
TYPE_HARDWARE and TYPE_HW_CACHE to TYPE_RAW on the lookup side.
This greatly reduces the chances of hitting the linear search.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi reported that when creating a lot of events, a lot of time is
spent in IPIs and asked if it would be possible to elide some of that.
Now when, as for example the perf-tool always does, events are created
disabled, then these events will not need to be scheduled when added
to the context (they're still disable) and therefore the IPI is not
required -- except for the very first event, that will need to set
ctx->is_active.
( It might be possible to set ctx->is_active remotely for cpu_ctx, but
we really need the IPI for task_ctx, so lets not make that
distinction. )
Also use __perf_effective_state() since group events depend on the
state of the leader, if the leader is OFF, the whole group is OFF.
So when sibling events are created enabled (XXX check tool) then we
only need a single IPI to create and enable the whole group (+ that
initial IPI to initialize the context).
Suggested-by: Andi Kleen <andi@firstfloor.org>
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
1a59413124 ("perf: Add wakeup watermark control to the AUX area")
added attr.__reserved_2 padding, but forgot to add an ABI check to reject
attributes with this field set. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025121636.75182-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for time(keeping):
- Add a missing include to prevent compiler warnings.
- Make the VDSO implementation of clock_getres() POSIX compliant
again. A recent change dropped the NULL pointer guard which is
required as NULL is a valid pointer value for this function.
- Fix two function documentation typos"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Fix two trivial comments
timers/sched_clock: Include local timekeeping.h for missing declarations
lib/vdso: Make clock_getres() POSIX compliant again
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
kernel:
- Unbreak the tracking of auxiliary buffer allocations which got
imbalanced causing recource limit failures.
- Fix the fallout of splitting of ToPA entries which missed to shift
the base entry PA correctly.
- Use the correct context to lookup the AUX event when unmapping the
associated AUX buffer so the event can be stopped and the buffer
reference dropped.
tools:
- Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
/proc/kcore
- Fix freeing id arrays in the event list so the correct event is
closed.
- Sync sched.h anc kvm.h headers with the kernel sources.
- Link jvmti against tools/lib/ctype.o to have weak strlcpy().
- Fix multiple memory and file descriptor leaks, found by coverity in
perf annotate.
- Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
by a static analysis tool"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX output stopping
perf/aux: Fix tracking of auxiliary trace buffer allocation
perf/x86/intel/pt: Fix base for single entry topa
perf kmem: Fix memory leak in compact_gfp_flags()
tools headers UAPI: Sync sched.h with the kernel
tools headers kvm: Sync kvm.h headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
perf c2c: Fix memory leak in build_cl_output()
perf tools: Fix mode setting in copyfile_mode_ns()
perf annotate: Fix multiple memory and file descriptor leaks
perf tools: Fix resource leak of closedir() on the error paths
perf evlist: Fix fix for freed id arrays
perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-10-27
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 11 day(s) which contain
a total of 7 files changed, 66 insertions(+), 16 deletions(-).
The main changes are:
1) Fix two use-after-free bugs in relation to RCU in jited symbol exposure to
kallsyms, from Daniel Borkmann.
2) Fix NULL pointer dereference in AF_XDP rx-only sockets, from Magnus Karlsson.
3) Fix hang in netdev unregister for hash based devmap as well as another overflow
bug on 32 bit archs in memlock cost calculation, from Toke Høiland-Jørgensen.
4) Fix wrong memory access in LWT BPF programs on reroute due to invalid dst.
Also fix BPF selftests to use more compatible nc options, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Warning is found by the code analysis tool:
"the condition 'if(ac && rc < 0)' is redundant: ac"
The @ac variable has been checked before. It can't be a null pointer
here, so remove the redundant condition check.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
cgroup_enable_task_cg_lists() is used to lazyily initialize task
cgroup associations on the first use to reduce fork / exit overheads
on systems which don't use cgroup. Unfortunately, locking around it
has never been actually correct and its value is dubious given how the
vast majority of systems use cgroup right away from boot.
This patch removes the optimization. For now, replace the cg_list
based branches with WARN_ON_ONCE()'s to be on the safe side. We can
simplify the logic further in the future.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch makes a few changes to btf_ctx_access() to prepare
it for non raw_tp use case where the attach_btf_id is not
necessary a BTF_KIND_TYPEDEF.
It moves the "btf_trace_" prefix check and typedef-follow logic to a new
function "check_attach_btf_id()" which is called only once during
bpf_check(). btf_ctx_access() only operates on a BTF_KIND_FUNC_PROTO
type now. That should also be more efficient since it is done only
one instead of every-time check_ctx_access() is called.
"check_attach_btf_id()" needs to find the func_proto type from
the attach_btf_id. It needs to store the result into the
newly added prog->aux->attach_func_proto. func_proto
btf type has no name, so a proper name should be stored into
"attach_func_name" also.
v2:
- Move the "btf_trace_" check to an earlier verifier phase (Alexei)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191025001811.1718491-1-kafai@fb.com
- Using device PM QoS of CPU devices for managing frequency limits
in cpufreq does not work, so introduce frequency QoS (based on the
original low-level PM QoS) for this purpose, switch cpufreq and
related code over to using it and fix a race involving deferred
updates of frequency limits on top of that (Rafael Wysocki, Sudeep
Holla).
- Avoid calling regulator_enable()/disable() from the OPP framework
to avoid side-effects on boot-enabled regulators that may change their
initial voltage due to performing initial voltage balancing without
all restrictions from the consumers (Marek Szyprowski).
- Avoid a kref management issue in the OPP library code and drop an
incorrectly added lockdep_assert_held() from it (Viresh Kumar).
- Make the recently added haltpoll cpuidle driver take the 'idle='
override into account as appropriate (Zhenzhong Duan).
-----BEGIN PGP SIGNATURE-----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=yitK
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix problems related to frequency limits management in cpufreq
that were introduced during the 5.3 cycle (when PM QoS had started to
be used for that), fix a few issues in the OPP (operating performance
points) library code and fix up the recently added haltpoll cpuidle
driver.
The cpufreq changes are somewhat bigger that I would like them to be
at this stage of the cycle, but the problems fixed by them include
crashes on boot and shutdown in some cases (among other things) and in
my view it is better to address the root of the issue right away.
Specifics:
- Using device PM QoS of CPU devices for managing frequency limits in
cpufreq does not work, so introduce frequency QoS (based on the
original low-level PM QoS) for this purpose, switch cpufreq and
related code over to using it and fix a race involving deferred
updates of frequency limits on top of that (Rafael Wysocki, Sudeep
Holla).
- Avoid calling regulator_enable()/disable() from the OPP framework
to avoid side-effects on boot-enabled regulators that may change
their initial voltage due to performing initial voltage balancing
without all restrictions from the consumers (Marek Szyprowski).
- Avoid a kref management issue in the OPP library code and drop an
incorrectly added lockdep_assert_held() from it (Viresh Kumar).
- Make the recently added haltpoll cpuidle driver take the 'idle='
override into account as appropriate (Zhenzhong Duan)"
* tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Reinitialize the list_kref before adding the static OPPs again
cpufreq: Cancel policy update work scheduled before freeing
cpuidle: haltpoll: Take 'idle=' override into account
opp: core: Revert "add regulators enable and disable"
PM: QoS: Drop frequency QoS types from device PM QoS
cpufreq: Use per-policy frequency QoS
PM: QoS: Introduce frequency QoS
opp: of: drop incorrect lockdep_assert_held()
Because pids->limit can be changed concurrently (but we don't want to
take a lock because it would be needlessly expensive), use atomic64_ts
instead.
Fixes: commit 49b786ea14 ("cgroup: implement the PIDs subsystem")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Recent versions of gcc (reported on gcc-7.4) issue array subscript
warnings for builds where SMP is not enabled.
kernel/debug/debug_core.c: In function 'kdb_dump_stack_on_cpu':
kernel/debug/debug_core.c:452:17: warning: array subscript is outside array
+bounds [-Warray-bounds]
if (!(kgdb_info[cpu].exception_state & DCPU_IS_SLAVE)) {
~~~~~~~~~^~~~~
kernel/debug/debug_core.c:469:33: warning: array subscript is outside array
+bounds [-Warray-bounds]
kgdb_info[cpu].exception_state |= DCPU_WANT_BT;
kernel/debug/debug_core.c:470:18: warning: array subscript is outside array
+bounds [-Warray-bounds]
while (kgdb_info[cpu].exception_state & DCPU_WANT_BT)
There is no bug here but there is scope to improve the code
generation for non-SMP systems (whilst also silencing the warning).
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 2277b49258 ("kdb: Fix stack crawling on 'running' CPUs that aren't the master")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20191021101057.23861-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
- A race in perf trace initialization (missing mutexes)
- Minor fix to represent gfp_t in synthetic events as properly signed
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXa5C9hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrFqAP9FskyS8xr1iqquWGarC38jYaLg8C2c
7ou+tdIm+Rez5QEA+3E456Esusmx3dACk2QLeb788Pf1wQOjKXyZ9H+2eAE=
=ys+Y
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor fixes:
- A race in perf trace initialization (missing mutexes)
- Minor fix to represent gfp_t in synthetic events as properly
signed"
* tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix race in perf_trace_buf initialization
tracing: Fix "gfp_t" format for synthetic events
Remove the nr_exclusive argument from __wake_up_sync_key() and derived
functions as everything seems to set it to 1. Note also that if it wasn't
set to 1, it would clear WF_SYNC anyway.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Recent changes modified the function arguments of
thread_group_sample_cputime() and task_cputimers_expired(), but forgot to
update the comments. Fix it up.
[ tglx: Changed the argument name of task_cputimers_expired() as the pointer
points to an array of samples. ]
Fixes: b7be4ef136 ("posix-cpu-timers: Switch thread group sampling to array")
Fixes: 001f797143 ("posix-cpu-timers: Make expiry checks array based")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1571643852-21848-1-git-send-email-wang.yi59@zte.com.cn
Include the timekeeping.h header to get the declaration of the
sched_clock_{suspend,resume} functions. Fixes the following sparse
warnings:
kernel/time/sched_clock.c:275:5: warning: symbol 'sched_clock_suspend' was not declared. Should it be static?
kernel/time/sched_clock.c:286:6: warning: symbol 'sched_clock_resume' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191022131226.11465-1-ben.dooks@codethink.co.uk
There is one more problematic case I noticed while recently fixing BPF kallsyms
handling in cd7455f101 ("bpf: Fix use after free in subprog's jited symbol
removal") and that is bpf_get_prog_name().
If BTF has been attached to the prog, then we may be able to fetch the function
signature type id in kallsyms through prog->aux->func_info[prog->aux->func_idx].type_id.
However, while the BTF object itself is torn down via RCU callback, the prog's
aux->func_info is immediately freed via kvfree(prog->aux->func_info) once the
prog's refcount either hit zero or when subprograms were already exposed via
kallsyms and we hit the error path added in 5482e9a93c ("bpf: Fix memleak in
aux->func_info and aux->btf").
This violates RCU as well since kallsyms could be walked in parallel where we
could access aux->func_info. Hence, defer kvfree() to after RCU grace period.
Looking at ba64e7d852 ("bpf: btf: support proper non-jit func info") there
is no reason/dependency where we couldn't defer the kvfree(aux->func_info) into
the RCU callback.
Fixes: 5482e9a93c ("bpf: Fix memleak in aux->func_info and aux->btf")
Fixes: ba64e7d852 ("bpf: btf: support proper non-jit func info")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/875f2906a7c1a0691f2d567b4d8e4ea2739b1e88.1571779205.git.daniel@iogearbox.net
syzkaller managed to trigger the following crash:
[...]
BUG: unable to handle page fault for address: ffffc90001923030
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD aa551067 P4D aa551067 PUD aa552067 PMD a572b067 PTE 80000000a1173163
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 7982 Comm: syz-executor912 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bpf_jit_binary_hdr include/linux/filter.h:787 [inline]
RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:531 [inline]
RIP: 0010:bpf_tree_comp kernel/bpf/core.c:600 [inline]
RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline]
RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline]
RIP: 0010:bpf_prog_kallsyms_find kernel/bpf/core.c:674 [inline]
RIP: 0010:is_bpf_text_address+0x184/0x3b0 kernel/bpf/core.c:709
[...]
Call Trace:
kernel_text_address kernel/extable.c:147 [inline]
__kernel_text_address+0x9a/0x110 kernel/extable.c:102
unwind_get_return_address+0x4c/0x90 arch/x86/kernel/unwind_frame.c:19
arch_stack_walk+0x98/0xe0 arch/x86/kernel/stacktrace.c:26
stack_trace_save+0xb6/0x150 kernel/stacktrace.c:123
save_stack mm/kasan/common.c:69 [inline]
set_track mm/kasan/common.c:77 [inline]
__kasan_kmalloc+0x11c/0x1b0 mm/kasan/common.c:510
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:518
slab_post_alloc_hook mm/slab.h:584 [inline]
slab_alloc mm/slab.c:3319 [inline]
kmem_cache_alloc+0x1f5/0x2e0 mm/slab.c:3483
getname_flags+0xba/0x640 fs/namei.c:138
getname+0x19/0x20 fs/namei.c:209
do_sys_open+0x261/0x560 fs/open.c:1091
__do_sys_open fs/open.c:1115 [inline]
__se_sys_open fs/open.c:1110 [inline]
__x64_sys_open+0x87/0x90 fs/open.c:1110
do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
After further debugging it turns out that we walk kallsyms while in parallel
we tear down a BPF program which contains subprograms that have been JITed
though the program itself has not been fully exposed and is eventually bailing
out with error.
The bpf_prog_kallsyms_del_subprogs() in bpf_prog_load()'s error path removes
the symbols, however, bpf_prog_free() tears down the JIT memory too early via
scheduled work. Instead, it needs to properly respect RCU grace period as the
kallsyms walk for BPF is under RCU.
Fix it by refactoring __bpf_prog_put()'s tear down and reuse it in our error
path where we defer final destruction when we have subprogs in the program.
Fixes: 7d1982b4e3 ("bpf: fix panic in prog load calls cleanup")
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Reported-by: syzbot+710043c5d1d5b5013bc7@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot+710043c5d1d5b5013bc7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/bpf/55f6367324c2d7e9583fa9ccf5385dcbba0d7a6e.1571752452.git.daniel@iogearbox.net
Commit:
8a58ddae23 ("perf/core: Fix exclusive events' grouping")
allows CAP_EXCLUSIVE events to be grouped with other events. Since all
of those also happen to be AUX events (which is not the case the other
way around, because arch/s390), this changes the rules for stopping the
output: the AUX event may not be on its PMU's context any more, if it's
grouped with a HW event, in which case it will be on that HW event's
context instead. If that's the case, munmap() of the AUX buffer can't
find and stop the AUX event, potentially leaving the last reference with
the atomic context, which will then end up freeing the AUX buffer. This
will then trip warnings:
Fix this by using the context's PMU context when looking for events
to stop, instead of the event's PMU context.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191022073940.61814-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It seems I forgot to add handling of devmap_hash type maps to the device
unregister hook for devmaps. This omission causes devices to not be
properly released, which causes hangs.
Fix this by adding the missing handler.
Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191019111931.2981954-1-toke@redhat.com
Reset all signal handlers of the child not set to SIG_IGN to SIG_DFL.
Mutually exclusive with CLONE_SIGHAND to not disturb other thread's
signal handler.
In the spirit of closer cooperation between glibc developers and kernel
developers (cf. [2]) this patchset came out of a discussion on the glibc
mailing list for improving posix_spawn() (cf. [1], [3], [4]). Kernel
support for this feature has been explicitly requested by glibc and I
see no reason not to help them with this.
The child helper process on Linux posix_spawn must ensure that no signal
handlers are enabled, so the signal disposition must be either SIG_DFL
or SIG_IGN. However, it requires a sigprocmask to obtain the current
signal mask and at least _NSIG sigaction calls to reset the signal
handlers for each posix_spawn call or complex state tracking that might
lead to data corruption in glibc. Adding this flags lets glibc avoid
these problems.
[1]: https://www.sourceware.org/ml/libc-alpha/2019-10/msg00149.html
[3]: https://www.sourceware.org/ml/libc-alpha/2019-10/msg00158.html
[4]: https://www.sourceware.org/ml/libc-alpha/2019-10/msg00160.html
[2]: https://lwn.net/Articles/799331/
'[...] by asking for better cooperation with the C-library projects
in general. They should be copied on patches containing ABI
changes, for example. I noted that there are often times where
C-library developers wish the kernel community had done things
differently; how could those be avoided in the future? Members of
the audience suggested that more glibc developers should perhaps
join the linux-api list. The other suggestion was to "copy Florian
on everything".'
Cc: Florian Weimer <fweimer@redhat.com>
Cc: libc-alpha@sourceware.org
Cc: linux-api@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20191014104538.3096-1-christian.brauner@ubuntu.com
The following commit from the v5.4 merge window:
d44248a413 ("perf/core: Rework memory accounting in perf_mmap()")
... breaks auxiliary trace buffer tracking.
If I run command 'perf record -e rbd000' to record samples and saving
them in the **auxiliary** trace buffer then the value of 'locked_vm' becomes
negative after all trace buffers have been allocated and released:
During allocation the values increase:
[52.250027] perf_mmap user->locked_vm:0x87 pinned_vm:0x0 ret:0
[52.250115] perf_mmap user->locked_vm:0x107 pinned_vm:0x0 ret:0
[52.250251] perf_mmap user->locked_vm:0x188 pinned_vm:0x0 ret:0
[52.250326] perf_mmap user->locked_vm:0x208 pinned_vm:0x0 ret:0
[52.250441] perf_mmap user->locked_vm:0x289 pinned_vm:0x0 ret:0
[52.250498] perf_mmap user->locked_vm:0x309 pinned_vm:0x0 ret:0
[52.250613] perf_mmap user->locked_vm:0x38a pinned_vm:0x0 ret:0
[52.250715] perf_mmap user->locked_vm:0x408 pinned_vm:0x2 ret:0
[52.250834] perf_mmap user->locked_vm:0x408 pinned_vm:0x83 ret:0
[52.250915] perf_mmap user->locked_vm:0x408 pinned_vm:0x103 ret:0
[52.251061] perf_mmap user->locked_vm:0x408 pinned_vm:0x184 ret:0
[52.251146] perf_mmap user->locked_vm:0x408 pinned_vm:0x204 ret:0
[52.251299] perf_mmap user->locked_vm:0x408 pinned_vm:0x285 ret:0
[52.251383] perf_mmap user->locked_vm:0x408 pinned_vm:0x305 ret:0
[52.251544] perf_mmap user->locked_vm:0x408 pinned_vm:0x386 ret:0
[52.251634] perf_mmap user->locked_vm:0x408 pinned_vm:0x406 ret:0
[52.253018] perf_mmap user->locked_vm:0x408 pinned_vm:0x487 ret:0
[52.253197] perf_mmap user->locked_vm:0x408 pinned_vm:0x508 ret:0
[52.253374] perf_mmap user->locked_vm:0x408 pinned_vm:0x589 ret:0
[52.253550] perf_mmap user->locked_vm:0x408 pinned_vm:0x60a ret:0
[52.253726] perf_mmap user->locked_vm:0x408 pinned_vm:0x68b ret:0
[52.253903] perf_mmap user->locked_vm:0x408 pinned_vm:0x70c ret:0
[52.254084] perf_mmap user->locked_vm:0x408 pinned_vm:0x78d ret:0
[52.254263] perf_mmap user->locked_vm:0x408 pinned_vm:0x80e ret:0
The value of user->locked_vm increases to a limit then the memory
is tracked by pinned_vm.
During deallocation the size is subtracted from pinned_vm until
it hits a limit. Then a larger value is subtracted from locked_vm
leading to a large number (because of type unsigned):
[64.267797] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x78d
[64.267826] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x70c
[64.267848] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x68b
[64.267869] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x60a
[64.267891] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x589
[64.267911] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x508
[64.267933] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x487
[64.267952] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x406
[64.268883] perf_mmap_close mmap_user->locked_vm:0x307 pinned_vm:0x406
[64.269117] perf_mmap_close mmap_user->locked_vm:0x206 pinned_vm:0x406
[64.269433] perf_mmap_close mmap_user->locked_vm:0x105 pinned_vm:0x406
[64.269536] perf_mmap_close mmap_user->locked_vm:0x4 pinned_vm:0x404
[64.269797] perf_mmap_close mmap_user->locked_vm:0xffffffffffffff84 pinned_vm:0x303
[64.270105] perf_mmap_close mmap_user->locked_vm:0xffffffffffffff04 pinned_vm:0x202
[64.270374] perf_mmap_close mmap_user->locked_vm:0xfffffffffffffe84 pinned_vm:0x101
[64.270628] perf_mmap_close mmap_user->locked_vm:0xfffffffffffffe04 pinned_vm:0x0
This value sticks for the user until system is rebooted, causing
follow-on system calls using locked_vm resource limit to fail.
Note: There is no issue using the normal trace buffer.
In fact the issue is in perf_mmap_close(). During allocation auxiliary
trace buffer memory is either traced as 'extra' and added to 'pinned_vm'
or trace as 'user_extra' and added to 'locked_vm'. This applies for
normal trace buffers and auxiliary trace buffer.
However in function perf_mmap_close() all auxiliary trace buffer is
subtraced from 'locked_vm' and never from 'pinned_vm'. This breaks the
ballance.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hechaol@fb.com
Cc: heiko.carstens@de.ibm.com
Cc: linux-perf-users@vger.kernel.org
Cc: songliubraving@fb.com
Fixes: d44248a413 ("perf/core: Rework memory accounting in perf_mmap()")
Link: https://lkml.kernel.org/r/20191021083354.67868-1-tmricht@linux.ibm.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The slow wake up path computes per sched_group statisics to select the
idlest group, which is quite similar to what load_balance() is doing
for selecting busiest group. Rework find_idlest_group() to classify the
sched_group and select the idlest one following the same steps as
load_balance().
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hdanton@sina.com
Cc: parth@linux.ibm.com
Cc: pauld@redhat.com
Cc: quentin.perret@arm.com
Cc: riel@surriel.com
Cc: srikar@linux.vnet.ibm.com
Cc: valentin.schneider@arm.com
Link: https://lkml.kernel.org/r/1571405198-27570-12-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds