The NHLT is already used to determine which SSP is connected to an
audio codec, we can parse the SSP blob to get the mclk_id from NHLT.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF topologies hard-code the MCLK used for SSP connections. That was a
bad idea in hindsight, this information should really come from BIOS
and/or machine driver.
This patch introduces a helper to scan all SSP endpoints connected to
a codec, and all formats to see what MCLK is used. When BIT(0) of the
mdivc offset if set in the SSP blob, MCLK0 is used, and likewise when
BIT(1) is set MCLK1 is used.
The case where both MCLKs are used is possible but has never been seen
in practice so should be treated as an error by the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220919115350.43104-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_pcm_runtime has playback/capture_widget for Codec2Coddec.
The naming is unclear.
This patch names it as c2c_widget and uses array.
struct snd_soc_pcm_runtime {
...
=> struct snd_soc_dapm_widget *playback_widget;
=> struct snd_soc_dapm_widget *capture_widget;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmfqv9mk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd has both dai_link pointer (A) and num_cpus/codecs (B).
(A) rtd->dai_link = dai_link;
(B) rtd->num_cpus = dai_link->num_cpus;
(B) rtd->num_codecs = dai_link->num_codecs;
But, we can get num_cpus/codecs (B) via dai_link (A).
This means we don't need to keep num_cpus/codecs on rtd.
This patch removes these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfkmv9n3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By construction a host and link DMA are always decoupled. This
decoupling happens in the assign() phase. There's no point in checking
if the two parts are decoupled, this is by-design always-true.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_hdac_ext_stream_release() routine uses the bus reg_lock, but
releases it before calling snd_hdac_stream_release() where the bus
reg_lock is taken again.
This creates a timing window where the link stream release could test
an invalid 'opened' boolean status and fail to recouple the host and
link parts.
Fix by exposing a locked version of snd_hdac_stream_release() and use
it without releasing the spinlock.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The logic is needlessly complicated, the basic rule is:
The host streams can be found by checking the 'opened' boolean.
The link streams can be found by checking the 'link_locked' boolean.
Once a stream is found, it can be unconditionally decoupled. The
snd_hdac_ext_stream_decouple_locked() routine will make sure the
register status is modified as needed and the 'decoupled' boolean set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make sure there's no ambiguity on layering with the appropriate prefix
added.
Pure rename, no functionality changed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are no external users of this helper, move to static and remove
sympol export. No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The code in this library is far from self-explanatory, hopefully this
state diagram reverse-engineered from the code will help others
understand the expected transitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This helper has no users outside of hdac_stream.c. External users
should only use snd_hdac_stream_start() and snd_hdac_stream_stop().
No functional change beyond making the function static and removing
the symbol export.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Track the converters handling the silent stream using a new
variable to avoid mixing of the open/close and silent stream
use. This change ensures the proper allocation of the converters.
Fixes: 5f80d6bd2b ("ALSA: hda/hdmi: Fix the converter reuse for the silent stream")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919135444.3554982-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Multiple maintainers have told us to start using the tracing
subsystem. Wish granted, this patchset suggested by Noah Klayman
removes a number of verbose and arguably useless dev_dbg or dev_vdbg
logs.
Beyond higher efficiency and less intrusive instrumentation, the use
of bpftrace scripts bring new functionality and helps gather
statistics on usage count on a running system, see how we can get
information on suspend/resume times with [1]
[1] https://github.com/thesofproject/sof-test/blob/main/kernel_tracing/bpftrace_scripts/suspend_resume_time.bt
On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.
Fixes: b0bcbe6157 ("ASoC: tas2770: Fix calling reset in probe")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On resuming, we anticipate that the jack is detected before playback
or capture. Therefore, we use semaphore to control the jack detection
done without any bothering. During booting, the driver launches jack
detection and releases the semaphore. However, it doesn't perceive the
maniputation of semaphore is not like resuming procedure. This makes
the semaphore's count value become to 2. There is more than one thread
can enter into the critical section. This may get unexpected situation
and make some chaos.
Signed-off-by: SJLIN0 <SJLIN0@nuvoton.com>
Signed-off-by: Wallace Lin <savagecin@gmail.com>
Link: https://lore.kernel.org/r/20220915012800.825196-1-SJLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Intel-based platforms rely on a topology file that hard-codes the
use of MCLK0. This is incorrect in 10% of the cases. Rather than
generating yet another set of topology files, this patch adds a kernel
module parameter to override the topology value.
In hindsight, we should never have allowed mclks to be specified in
topology, this is a hardware-level information that should not have
been visible in the topology.
Future patches will try to set this value automagically, e.g. by
parsing the NHLT content.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSP count is incorrect for TGL and MTL devices, the SSP count is
limited to 3 (I2SPC parameter in the Integration HAS).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver wants to know the bit rate on the serial bus and takes that
to be the value set by 'set_sysclk'. The 'set_bclk_ratio' op is a better
fit for figuring out the clocking parameters of the serial bus, so
implement that and give it precedence over the prior methods.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-11-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L83 part is a headphone jack codec found in recent Apple
machines. It is a publicly undocumented part but as far as can be told
it is identical to CS42L42 except for two points:
* The chip ID is different.
* Of those registers for which we have a default value in the existing
CS42L42 kernel driver, one register (MCLK_CTL) differs in its reset
value on CS42L83.
To address those two points (and only those), add to the CS42L42 driver
a separate CS42L83 front.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-10-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Export the regmap callbacks for indicating readable/volatile registers,
also the range structure, to the CS42L42 core namespace. This is in
advance of reusing these bits in a CS42L83 driver frontend.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-9-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Split the I2C bus driver definition and probe()/remove() into a
separate module so that a SoundWire build of CS42L42 support does
not have a spurious dependency on I2C.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-8-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass pointers to snd_soc_component_driver and snd_soc_dai_driver
objects into cs42l42_common_probe().
This is in preparation for adding SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-7-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SoundWire the system resume cannot restore registers until the
host controller has re-enumerated the peripheral.
This patch splits cs42l42_resume() into two functions, one to
power up and the other to restore registers, ready for adding
SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-6-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare for adding SoundWire the probe must be split into three
parts:
1) The bus-specific probe
2) Common bus-agnostic probe steps
3) Initialization of the peripheral registers
Step (3) must be separate because on SoundWire devices the probe must
enable power supplies and release reset so that the peripheral can be
enumerated by the bus, but it isn't possible to access registers until
enumeration has completed.
The call to devm_snd_soc_register_component() must be done at stage (2)
so that it can EPROBE_DEFER if necessary. In SoundWire systems stage (3)
is not a probe event so a deferral at this stage would not result in
re-probing dependencies.
A new init_done flag indicates that the chip has been identified and
initialized. This is used to prevent cs42l42_remove(), cs42l42_suspend(),
cs42l42_restore() and cs42l42_irq_thread() from attempting register
accesses if the chip was not successfully initialized. Although this
cannot happen on I2C, because the entire probe would fail, it is
possible on SoundWire if probe succeeds but the cs42l42 is never
enumerated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for splitting cs42l42_i2c_probe() into multiple functions
replace use of &i2c_client->dev with cs42l42->dev. This reduces diff
clutter in the patch that splits the function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the handling of bitclock frequency by keeping all the logic
in cs42l42_pcm_hw_params(), which then simply passes the frequency as
an argument to cs42l42_pll_config().
The previous code had become clunky as a legacy of earlier versions of
the clock handling. The logic was split across cs42l42_pcm_hw_params()
and cs42l42_pll_config(), with the params-derived bclk stashed in
struct cs42l42_private only to pass it to cs42l42_pll_config().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
At present, succesfull probing of H3 Codec results in an error
debugfs: Directory '1c22c00.codec' with parent 'H3 Audio Codec' already present!
This is caused by a directory name conflict between codec
components. Fix it by setting debugfs_prefix for the CPU DAI
component.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://lore.kernel.org/r/20220913212256.151799-2-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062630.154277-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented
by 'PLLB' dapm widget.
The coupling risk exists, so this patch fixes it.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-3-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented
by 'I2S1' dapm widget.
The coupling risk exists, so this patch fixes it.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented by
'MICBIAS' and 'Vref2' dapm widgets.
There is a risk of causing not expected behavior if we
mix using dapm and CCF operations in machine specific code.
This patch reduces the coupling.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062415.153659-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In some Chrome platforms if OEM's use their own string as SYS_VENDOR than
"Google", it leads to firmware load failure from intel/sof/community path.
Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used
as common prefix and is supported in all Chrome platforms.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Almost all default rtd->xxx are setup at soc_new_pcm_runtime()
which is sub-function of snd_soc_add_pcm_runtime() (A).
But "rtd->pmdown_time" is setup at soc_init_pcm_runtime() (B).
It is very random timing setup. This patch setup it at (A),
same as other rtd->xxx.
static int snd_soc_bind_card(...)
{
...
for_each_card_prelinks(...) {
(A) ret = snd_soc_add_pcm_runtime(...);
...
}
...
for_each_card_rtds(...) {
(B) ret = soc_init_pcm_runtime(...);
...
}
...
}
One note is that current topology/intel are directly calling
snd_soc_add_pcm_runtime() (A) without calling soc_init_pcm_runtime() (B).
This means, its "rtd->pmdown_time settings" was 0, but will have default
value by this patch.
"rtd->pmdown_time settings" will be used at
snd_soc_runtime_ignore_pmdown_time(). This patch adds
"ignore_pmdown_time" to these driver to keep compatibility.
bool snd_soc_runtime_ignore_pmdown_time(...)
{
...
=> if (!rtd->pmdown_time || rtd->dai_link->ignore_pmdown_time)
return true;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yhxmjjd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an ALSA event on the RX Sample Rate controller upon the dpll locked
interrupt, making it possible for audio applications to monitor changes
in the hardware.
Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220912105407.3157868-1-robert.rosengren@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220916062027.152815-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062549.154114-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062234.153275-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220916061906.152434-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062511.153962-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062320.153456-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for SC8280XP SoC machine driver.
First patch moves some of the commonly used code to common from sm8250 machine driver
and the follow on code adds minimal support for sc8280xp.
Currently this driver is only tested with SmartSpeakers and Headset
on Lenovo Thinkpad X13s.
Support for sm8450 is tested and I will post the patches soon.
Add machine driver for sc8280xp SoC.
This intial supports only includes WSA883x Speakers and WCD938x based headset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916132427.1845-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SM8450 machine driver code can be reused across multiple Qualcomm SoCs,
At least another 2 of them for now (SM8450 and SC8250XP).
Move some of the common SoundWire stream specific code to common file
so that other drivers can use it instead of duplication.
This patch is to prepare the common driver to be able to add new SoCs support
with less dupication.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916132427.1845-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom_snd_parse_of depends on ASoC EXPORT_SYMBOL_GPL functions,
so make qcom_snd_parse_of and EXPORT_SYMBOL_GPL.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916132427.1845-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces dev_vdbg with tracepoints in new ipc4-loader code.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes unneeded dev_vdbg calls and replaces remaining ones
with tracepoints to reduce overhead and enable use of trace collection
and analysis tools.
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces all dev_vdbg calls with tracepoints to reduce
overhead and enable use of trace collection and analysis tools.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Intel HDaudio controller relies on a single interrupt line which
wire-ORs multiple interrupt sources, such as stream, IPC, SoundWire and
wakes. This patch adds the ability to trace each event occurrence.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enables tracking of use_count during widget setup and free routines.
Useful for debugging unbalanced use_counts during suspend/resume.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the change introduced by 6ac246105b, the calibration can only be
done after the codec probe (but questionable if it is working since
203A_AMP_EN is 0) or when the codec is powered up for audio use, in other
cases "AMP is not ready to run calibration" is printed.
This changes how this worked before the patch: the codec was force powered
on for the duration of the calibration readout, then shut down.
So, if a calibration was asked when the codec was active, it would have
powered it down?
To correct the calibration logic: check if the codec is powered on and if
it is not then enable it, do the readout and put it back to disabled.
Do this while keeping the dapm locked to avoid interfering with normal
operation via DAPM.
Fixes: 6ac246105b ("ASoC: max98390: Remove unnecessary amp on/off conrtol")
Reported-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220916111349.4433-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new(). This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.
This patch fixes the double-free situation by removing the superfluous
kfree(). Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.
Fixes: e8ad415b7a ("ALSA: core: Add managed card creation")
Reported-by: Rondreis <linhaoguo86@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com
Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similair to the HP OMEN 15, the HP OMEN 16 also needs
ALC285_FIXUP_HP_MUTE_LED for the mute LED to work.
[ Rearranged the entry in PCI SSID order by tiwai ]
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220918171300.24693-1-dhould3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.
If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few entries have been mistakenly inserted in wrong positions without
considering the SSID ordering. Place them at right positions.
Fixes: b7557267c2 ("ALSA: hda/realtek: Add quirk for ASUS GA402")
Fixes: 94db9cc8f8 ("ALSA: hda/realtek: Add quirk for ASUS GU603")
Fixes: 739d0959fb ("ALSA: hda: Add quirk for ASUS Flow x13")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just as with the 5570 (and the other Dell laptops), this enables the two
subwoofer speakers on the Dell Precision 5530 together with the main
ones, significantly increasing the audio quality. I've tested this
myself on a 5530 and can confirm it's working as expected.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix in commit 6392dcd1d0 ("ALSA: usb-audio: Register card
at the last interface") tried to delay the card registration until the
last found interface is probed. It assumed that the probe callback
gets called for those later interfaces, but it's not always true; as
the driver loops over the descriptor and probes the matching ones,
it's not separately called via multiple probe calls. This results in
the missing card registration, i.e. no sound device.
For addressing this problem, replace the check whether the last
interface is processed with usb_interface_claimed() instead of the
comparison with the probe interface number.
Fixes: 6392dcd1d0 ("ALSA: usb-audio: Register card at the last interface")
Link: https://lore.kernel.org/r/20220915085947.7922-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In eukrea_tlv320_probe(), we need to hold the reference returned
from of_find_compatible_node() which has increased the refcount
and then call of_node_put() with it when done.
Fixes: 66f232908d ("ASoC: eukrea-tlv320: Add DT support.")
Co-authored-by: Kelin Wang <wangkelin2023@163.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regmap_read_poll_timeout to poll I2S_CLR.
It also fixes the 'rockchip-i2s ff070000.i2s; fail to clear' when
the read of I2S_CLR exceeds the retry limit.
Fixes: 0ff9f8b9f5 ("ASoC: rockchip: i2s: Fix error code when fail to read I2S_CLR")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220914031234.2250298-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 2848d34c3b ("ASoC: tas2562: Fix mute/unmute") the
following build warning is seen:
sound/soc/codecs/tas2562.c:442:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Fix the warning by returning the 'ret' variable.
Fixes: 2848d34c3b ("ASoC: tas2562: Fix mute/unmute")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220913231706.516849-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the
previous Precision 5560. I replicated that patch onto this one, and can
confirm that the audio is much better (the woofers are now working);
I've tested it on my Dell Precision 5570.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n,
gcc warns about an unused variable:
sound/soc/intel/skylake/skl.c: In function ‘probe_codec’:
sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable]
struct skl_dev *skl = bus_to_skl(bus);
^~~
cc1: all warnings being treated as errors
Fixes: 3fd63658ca ("ASoC: Intel: Drop hdac_ext usage for codec device creation")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case when a codec device is probed before codec analog
controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in
a misleading error message
sun4i-codec 1c22c00.codec: Failed to register our card
even if the device is probed successfully later. Use dev_err_probe()
to demote the above error to a debug message.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n,
gcc warns about an unused variable:
sound/soc/intel/skylake/skl.c: In function ‘probe_codec’:
sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable]
struct skl_dev *skl = bus_to_skl(bus);
^~~
cc1: all warnings being treated as errors
Fixes: 3fd63658ca ("ASoC: Intel: Drop hdac_ext usage for codec device creation")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixup this warning when CONFIG_PM not defined
linux/sound/soc/codecs/ak4458.c:631:13: error: 'ak4458_reset' defined but\
not used [-Werror=unused-function]
631 | static void ak4458_reset(struct ak4458_priv *ak4458, bool active)
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e9e7df8899 ("ASoC: ak4458: Remove component probe() and remove()")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663057594-29141-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
imx_card_parse_of will search all the node with loop,
if there is defer probe happen in the middle of loop,
the previous released codec node will be released
twice, then cause refcount issue.
Here assign NULL to pointer of released nodes to fix
the issue.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663059601-29259-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This change converts the assigned value from int type to
the bool type to retain consistency with other structure
members like 'setup', 'non_pcm' etc.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070307.3234038-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nvidia HDA HW expects infoframe data bytes order same for both
HDMI and DP i.e infoframe data starts from 5th bytes offset. As
dp infoframe structure has 4th byte as valid infoframe data, use
hdmi infoframe structure for nvidia dp infoframe to match HW behvaior.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913065818.13015-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add module parameters to support customized min/max volume leveling,
which will be useful to test devices with different volume granularity.
Signed-off-by: YJ Lee <yunjunlee@chromium.org>
Link: https://lore.kernel.org/r/20220912072945.760949-1-yunjunlee@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We fixed the potential deadlock at dynamic unbinding the HD-audio
codec at the commit 7206998f57 ("ALSA: hda: Fix potential deadlock
at codec unbinding"), but ironically, this caused another potential
deadlock. The current code uses refcount_dec() and waits for the
pending task with wait_event for dropping the refcount to 0. This
works fine when PCMs are assigned and actually waiting for the
refcount drop.
Meanwhile, when there was no PCM assigned, the refcount_dec() call
itself was supposed to drop to zero -- alas, it doesn't in reality;
refcount_dec() complains, spews kernel warning and it saturates
instead of dropping to 0, due to the nature of refcount_dec()
implementation. This eventually blocks the wait_event() wakeup and
the code get stuck there.
For avoiding the problem, we call refcount_dec_and_test() and skips
the sync-wait if it already reaches to zero.
The patch does a slight code reshuffling to make sure to invoke other
disconnect calls before the sync-wait, too.
Fixes: 7206998f57 ("ALSA: hda: Fix potential deadlock at codec unbinding")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YxtflWQnslMHVlU7@intel.com
Link: https://lore.kernel.org/r/20220910142550.28494-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>:
The i2s ports on MediaTek SoCs only support a single data lane. In order
to achieve full-duplex operation thus two i2s ports, one for input and
one for output, need to be used together and sharing a single clock from
one of the ports.
This clock sharing setting was previously read by the sound platform
driver from the devicetree, but given that the input/output pairing is
closely related to which codecs are connected to which ports, the
machine sound driver can infer and set it, so that no DT property is
required.
At this point only mt8183-kukui was using the DT property, but given
that this property was never documented, and that the API introduced in
this series makes it obsolete, the undocumented DT property can safely
be removed.
This series adds a function to allow setting the i2s shared clocks,
makes use of it in the machine drivers as required, and removes the no
longer required DT properties and support for them in the drivers, for
all of mt8192, mt8183 and mt8186.
Nícolas F. R. A. Prado (10):
ASoC: mediatek: mt8192: Allow setting shared clocks from machine
driver
ASoC: mediatek: mt8192-mt6359: Make i2s9 share the clock from i2s8
ASoC: mediatek: mt8192: Remove clock share parsing from DT
ASoC: mediatek: mt8183: Allow setting shared clocks from machine
driver
ASoC: mediatek: mt8183: Configure shared clocks
ASoC: mediatek: mt8183: Remove clock share parsing from DT
arm64: dts: mediatek: kukui: Remove i2s-share properties
ASoC: mediatek: mt8186: Allow setting shared clocks from machine
driver
ASoC: mediatek: mt8186: Configure shared clocks
ASoC: mediatek: mt8186: Remove clock share parsing from DT
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 5 --
sound/soc/mediatek/mt8183/mt8183-afe-common.h | 3 ++
.../mediatek/mt8183/mt8183-da7219-max98357.c | 33 +++++++++++++
sound/soc/mediatek/mt8183/mt8183-dai-i2s.c | 45 ++++++++---------
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 33 +++++++++++++
sound/soc/mediatek/mt8186/mt8186-afe-common.h | 3 ++
sound/soc/mediatek/mt8186/mt8186-dai-i2s.c | 44 ++++++++---------
.../mt8186/mt8186-mt6366-da7219-max98357.c | 18 +++++++
.../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 18 +++++++
sound/soc/mediatek/mt8192/mt8192-afe-common.h | 3 ++
sound/soc/mediatek/mt8192/mt8192-dai-i2s.c | 49 ++++++++-----------
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 9 ++++
12 files changed, 180 insertions(+), 83 deletions(-)
--
2.37.3
If the initialization is not finished, then filling input data to
the FIFO may fail. So it is better to add initialization finishing
check in the runtime resume for suspend & resume case.
And consider the case of three instances working in parallel,
increase the retry times to 50 for more initialization time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicolinc@gmail.com>
Link: https://lore.kernel.org/r/1662695098-24602-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hdmi-codec.c is using kzalloc(), but we can replace it to
devm_kzalloc() and then, we can remove .remove callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/874jxhmjgw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the clock sharing for i2s ports can be configured from the
sound machine driver, remove the logic that was used to parse the
properties from the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-11-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i2s0 and i2s1 are paired input/output connected to the same codec and
should share the same clock. Likewise for i2s2 and i2s3. Set the clock
sharing for each pair during the codec's initialization.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-10-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-9-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the clock sharing for i2s ports can be configured from the
sound machine driver, remove the logic that was used to parse the
properties from the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i2s0 and i2s5 are paired input/output connected to the same codec and
should share the same clock. Likewise for i2s2 and i2s3. Set the clock
sharing for each pair during the DAI initialization.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-5-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the clock sharing for i2s ports can be configured from the
sound machine driver, remove the logic that was used to parse the
properties from the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both i2s8 and i2s9 are connected to the rt5682 codec and should share
the same clock to work in a full-duplex manner. Set the clock sharing
during the initialization for rt5682.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the mtrace type for platforms supported by IPC4.
Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by
the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL, ADL)
and ACE (MTL).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation of low level, platform dependent IPC4 message handling
and set the DSP ops for IPC4 for ICL platform.
Suggested-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One of the debugging/logging features for an IPC4 based firmware is the use
of the debug window to deliver log messages to host via the shared SRAM.
The initial implementation of the mtrace supports only TGL/MTL style of
logging, but can be extended to support other types, like APL, SKL, CNL,
etc.
The window is split into 16 'slots' where the first slot contains the
descriptors for the remaining 15 slots.
Each DSP core logs to a separate slot and the slot allocation is not fixed,
we can not assume that the first slot is always used by core0 for example.
The firmware sends LOG_BUFFER_STATUS message when new log batch is
available from one of the cores (after it updated the write_ptr in the
given slot).
Host should update the read_ptr in the same slot when it has taken out log
data.
The patch also updates the sof_ipc4_fw_data struct with parameters needed
for the mtrace to be enabled and used safely.
Co-developed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug window for IPC4 compatible firmware is always window #2,
set the debug_box.offset accordingly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the index number directly, add a define for the outbox
window index.
It is always window 1 with IPC4.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print messages when the SOF_DBG_PRINT_DMA_POSITION_UPDATE_LOGS flag
is not set to reduce the amount of prints when the tracing is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
expand_read_bal has been removed since commit fc37449f79 ("The
next round of scheduled OSS code removal").
software_input_volume has been removed since
commit 0a1b42db4b ("sound: sound/oss/dmasound/: cleanups").
so remove the declare for them from header file.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220909061126.1129585-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a few fixes here, all driver specific and fairly small.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmMZ3RMACgkQJNaLcl1U
h9CJ3wf/Qvez0ooFNL+WnW2YSl56DgWO3lMbgkSyLmiS5L02jfDObB1CTvY76czT
z057WQBYr589JEIHFy4etPY2l0l5NJn/cUGOw4kl7TOV9l2o8PU3dlQMqpGdsZfY
6pMvNZgr9HO7N5jXvbNg80HW7jRfOJzLU3b7HLLfWRf909Vflw8/C7N/cRnjimud
D3atQ/hqgEczTxsdLekgFdsg3qmj+VQ5iT5COiIjuTjYPwF5KVqgRkyq/Zvjorkd
/sdVf3+tXuFpRotGEKscpnZWbfcY5sEFkq0qCHVoPW150UP7KJRbSKJqVO9Vrlj5
fb34rwnXaqPDU8IUKL/9QQ+yaCbOlQ==
=wX+x
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.0
Quite a few fixes here, all driver specific and fairly small.
Most function in ak4458_probe() and ak4458_remove() are
duplicate with dai ops, so remove them and move dsd_path
setting to dai ops.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1662622316-23426-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return the value regmap_write() and sti_sas_init_sas_registers() directly
instead of storing it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220908010304.342760-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Amp is already control in userspace before trigger calibrate function.
Remove unnecessary control in calibrate function and
add condition to check calibration is ready.
Signed-off-by: Steve Lee <steve.lee.analog@gmail.com>
Link: https://lore.kernel.org/r/20220908060359.13606-1-steve.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_link_event_pre_pmu() is using if/else for config->formats
check, but "else" case is for just error.
Unnecessary if/else is not good for readable code. this patch checks
if config->formats was zero as error case.
Moreover, we don't need to indicate config->formats value in error message,
because it is zero. This patch tidyup it, too.
=> if (config->formats) {
...
} else {
dev_warn(w->dapm->dev, "ASoC: Invalid format %llx specified\n",
=> config->formats);
...
}
Link: https://lore.kernel.org/all/YxiDkDOwRsbXeZ17@sirena.org.uk/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877d2ebn3t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series fixes Sound Open Firmware support for MT8195 by making
sure that the sound card driver is actually able to probe and IPC
can finally happen.
It is now possible to get DSP support for audio.
Tested on MT8195 Tomato - Acer Chromebook Spin 513 CP513-2H (Pipewire).
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are cleanup patches for soc-dapm.c.
Each patches are not related, very random cleanup.
Current snd_soc_dapm_new_control_unlocked() error handling is wrong.
It is using "goto request_failed" (A), but error message is using
"w->name" (B) which is not yet created in such timing.
snd_soc_dapm_new_control_unlocked(xxx)
{
...
switch (w->id) {
case xxx:
...
if (IS_ERR(...)) {
ret = PTR_ERR(...);
(A) goto request_failed;
}
...
}
prefix = soc_dapm_prefix(...);
if (prefix)
(B) w->name = kasprintf(...);
else
(B) w->name = kstrdup_const(...);
...
(A) request_failed:
if (ret != -EPROBE_DEFER)
(B) dev_err(..., w->name, ...);
return ...;
}
we can create "w->name" at beginning of this function.
In such case, we need to call kfree_const(w->name) at error case.
This patch do these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnah8l7e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_dai_link_event_pre_pmu() is checking "config".
It is using dev_err() (A) if it was NULL, so we don't need to use
WARN_ON() (B) to check it, it is over-kill. This patch removes it.
(B) if (WARN_ON(!config)) {
(A) dev_err(...);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgfd8l7s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/YxeaITtlJexygQo9@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support devicetree by adding a snd_soc_of_mach array, specifying SOF
topologies for a generic MT8195 machine and for Google Tomato
Chromebooks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the .mailbox_{read,write} generic callbacks for SOF IPC and, while
at it, also change the ipc_msg_data callback to use the SOF API
sof_ipc_msg_data() instead of the custom function mt8195_ipc_msg_data().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding a probe callback on this snd_soc_card is required when
Sound Open Firmware support is desired, as we need to appropriately
populate the stream_name for SOF to be able to bind widgets.
Failing to do so will produce errors when applying the SOF topology
leading to card registration failure (so, no sound).
While at it, also make sure to fill the topology_shortname as required.
Fixes: 0caf1120c5 ("ASoC: mediatek: mt8195: extract SOF common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent commit c11117b634 ("ALSA: usb-audio: Refcount multiple
accesses on the single clock") tries to manage the clock rate shared
by several endpoints. This was intended for avoiding the unmatched
rate by a different endpoint, but unfortunately, it introduced a
regression for PulseAudio and pipewire, too; those applications try to
probe the multiple possible rates (44.1k and 48kHz) and setting up the
normal rate fails but only the last rate is applied.
The cause is that the last sample rate is still left to the clock
reference even after closing the endpoint, and this value is still
used at the next open. It happens only when applications set up via
PCM prepare but don't start/stop the stream; the rate is reset when
the stream is stopped, but it's not cleared at close.
This patch addresses the issue above, simply by clearing the rate set
in the clock reference at the last close of each endpoint.
Fixes: c11117b634 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/YxXIWv8dYmg1tnXP@zx2c4.com/
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2620
Link: https://lore.kernel.org/r/20220907100421.6443-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.
This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.
This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero
UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When put_device() is called in another function it's hard to realize
that and easy to "fix" the code in a wrong way. Instead, move
put_device() to be in the same scope as get_device(), so we prevent
appearance of any attempts to "fix" the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220905165826.35979-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix for IDT codecs to keep the power up while the beep is
enabled can be better integrated into the beep helper code.
This patch cleans up the code with refactoring.
Fixes: 414d38ba87 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Link: https://lore.kernel.org/r/20220906092306.26183-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The USB-audio driver matches per interface, and as default, it
registers the card instance at the very first instance. This can be a
problem for the devices that have multiple interfaces to be probed, as
the udev rule isn't applied properly for the later appearing
interfaces. Although we introduced the delayed_register option and
the quirks for covering those shortcomings, it's nothing but a
workaround for specific devices.
This patch is an another attempt to fix the problem in a more generic
way. Now the driver checks the whole USB device descriptor at the
very first time when an interface is attached to a sound card. It
looks at each matching interface in the descriptor and remembers the
last matching one. The snd_card_register() is invoked only when this
last interface is probed.
After this change, the quirks for the delayed registration become
superfluous, hence they are removed along with the patch. OTOH, the
delayed_register option is still kept, as it might be useful for some
corner cases (e.g. a special driver overtakes the interface probe from
the standard driver, and the last interface probe may miss).
Link: https://lore.kernel.org/r/20220904161247.16461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The last fix for trying to recover the regression on AMD platforms,
unfortunately, leaded to yet another regression: it turned out that
IOMMUs don't like the usage of raw page allocations.
This is yet another attempt for addressing the log saga; at this time,
we re-use the existing buffer allocation mechanism with SG-pages
although we require only single pages. The SG buffer allocation
itself was confirmed to work for stream buffers, so it's relatively
easy to adapt for other places.
The only problem is: although the HD-audio code is accessing the
address directly via dmab->address field, SG-pages don't set up it.
For the ease of adaption, we now set up the dmab->addr field from the
address of the first page as default, so that it can run with the
HD-audio driver code as-is without the excessive call of
snd_sgbuf_get_addr() multiple times; that's the only change in the
memalloc helper side. The rest is nothing but a flip of the dma_type
field in the HD-audio side.
Fixes: a8d302a0b7 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CABXGCsO+kB2t5QyHY-rUe76npr1m0-5JOtt8g8SiHUo34ur7Ww@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216112
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/20220906090319.23358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.
Fix this by checking the number of interfaces.
Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com>
Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AZA HW may send a burst read/write request crossing 4K memory boundary.
The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to
include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K
boundary.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Continuation of recent upstream discussion [1] regarding user string
tokenization.
First, parse_int_array_user() is introduced to allow for splitting
specified user string into a sequence of integers. Makes use of
get_options() internally so the parsing logic is not duplicated.
With that done, redundant parts of the sound driver are removed.
Originally similar functionality was added for the SOF sound driver. As
more users are on the horizon, it is desirable to update existing
string_helpers code and provide a unified solution.
Make use of global integer-array parsing helper instead of the internal
one as both serve same purpose. With that, both strsplit_u32() and
tokenize_input() become unused so remove them.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220904102840.862395-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The newly added stac_check_power_status() caused a compile warning
when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it.
Fixes: 414d38ba87 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a small race window at snd_pcm_oss_sync() that is called from
OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls
snd_pcm_oss_make_ready() at first, then takes the params_lock mutex
for the rest. When the stream is set up again by another thread
between them, it leads to inconsistency, and may result in unexpected
results such as NULL dereference of OSS buffer as a fuzzer spotted
recently.
The fix is simply to cover snd_pcm_oss_make_ready() call into the same
params_lock mutex with snd_pcm_oss_make_ready_locked() variant.
Reported-and-tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XN7JDM4xSXGhtusQfS2mSBcx50VJKwQpCq=WeLt57aaZA@mail.gmail.com
Link: https://lore.kernel.org/r/20220905060714.22549-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the requesting of DMA channels further down from 'probe' to
'pcm_new'. This is to spare the allocated DMA channel resources as we
typically only ever use one or two of the clusters for PCM streaming.
Before we would request DMA channels for all clusters.
(This is prompted by a change in the Audio DMA Controller driver, which
will now be allocating cache SRAM to channels.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220905074030.1293-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
From current design in sof_machine_check the SOF can only support
ACPI type machine.
In sof_machine_check if there is no ACPI machine exist, the function
will return -ENODEV directly, that's we don't expected if we do not
base on ACPI machine.
So we add a new function named sof_of_machine_select that we can pass
sof_machine_check and obtain info required by snd_sof_new_platform_drv.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220903032151.13664-1-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tracing capabilities for the speaker protection fw enabled via
commit c55b3e46cb ("ASoC: wm_adsp: Add trace caps to speaker
protection FW") are not be available on all platforms, such as the
Valve's Steam Deck which is based on the Halo Core DSP.
As a consequence, whenever the firmware is loaded, a rather misleading
'Failed to parse legacy: -19' error message is written to the kernel
ring buffer:
[ 288.977412] steamdeck kernel: cs35l41 spi-VLV1776:01: DSP1: Firmware version: 3
[ 288.978002] steamdeck kernel: cs35l41 spi-VLV1776:01: DSP1: cs35l41-dsp1-spk-prot.wmfw: Fri 02 Apr 2021 21:03:50 W. Europe Daylight Time
[ 289.094065] steamdeck kernel: cs35l41 spi-VLV1776:01: DSP1: Firmware: 400a4 vendor: 0x2 v0.33.0, 2 algorithms
[ 289.095073] steamdeck kernel: cs35l41 spi-VLV1776:01: DSP1: 0: ID cd v29.53.0 XM@94 YM@e
[ 289.095665] steamdeck kernel: cs35l41 spi-VLV1776:01: DSP1: 1: ID f20b v0.0.1 XM@170 YM@0
[ 289.096275] steamdeck kernel: cs35l41 spi-VLV1776:01: DSP1: Protection: C:\Users\ocanavan\Desktop\cirrusTune_july2021.bin
[ 291.172383] steamdeck kernel: cs35l41 spi-VLV1776:01: DSP1: Failed to parse legacy: -19
Update wm_adsp_buffer_init() to print a more descriptive info message
when wm_adsp_buffer_parse_legacy() returns -ENODEV.
Fixes: c55b3e46cb ("ASoC: wm_adsp: Add trace caps to speaker protection FW")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220825220530.1205141-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.
(This mirrors commit 1e5907bcb3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825142226.80929-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
(This mirrors commit c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825142226.80929-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current dpcm_add_paths() is checking fe condition in loop (= A),
but fe condition (X) is not related to the loop (B).
(X) static int dpcm_add_paths(fe, stream, ...)
{
...
(B) for_each_dapm_widgets(list, i, widget) {
...
(A) if (!fe->dpcm[stream].runtime && !fe->fe_compr)
continue;
...
}
...
}
This patch checks fe condition at out of loop
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmgi4dz4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-pcm.c has many similar code for error case.
This patch adds soc_pcm_ret() and share the code and error message.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r10y4dzb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 4bf2e385aa ("ASoC: core: Init pcm runtime work early to
avoid warnings") has added generic close_delayed_work() which checks
close_delayed_work_func
static void close_delayed_work(...) {
...
=> if (rtd->close_delayed_work_func)
rtd->close_delayed_work_func(rtd);
}
So, we don't need to have NULL function for Codec2Codec.
=> static void codec2codec_close_delayed_work()
{
/*
* Currently nothing to do for c2c links
* Since c2c links are internal nodes in the DAPM graph and
* don't interface with the outside world or application layer
* we don't have to do any special handling on close.
*/
}
int soc_new_pcm(...)
{
...
if (rtd->dai_link->params)
=> rtd->close_delayed_work_func = codec2codec_close_delayed_work;
else
rtd->close_delayed_work_func = snd_soc_close_delayed_work;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfle4dzk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As rsnd_mod_power_on() can return negative numbers,
it should be better to check the return value and
deal with the exception.
Fixes: e7d850dd10 ("ASoC: rsnd: use mod base common method on SSI-parent")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220902013030.3691266-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In loopback_jiffies_timer_pos_update(), we are getting jiffies twice.
First time for playback, second time for capture. Jiffies can be updated
between these two calls and if the capture jiffies is larger, extra zeros
will be filled in the capture buffer.
Change to get jiffies once and use it for both playback and capture.
Signed-off-by: Pattara Teerapong <pteerapong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220901144036.4049060-1-pteerapong@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up the superfluous checks and calls for setting up
the endpoints at PCM prepare callback:
- Drop stop_endpoints() and sync_pending_stops() calls; the stream is
guaranteed to have been already stopped and synced at each PCM
prepare call by ALSA PCM core
- Call snd_usb_endpoint_prepare() unconditionally;
the check for endpoint->need_setup is done in
snd_pcm_hw_endpoint_prepare() itself
- Apply snd_usb_set_format_quirk() only when the endpoint is actually
set up (i.e. the return code from snd_usb_endpoint_prepare() > 0)
- Move a few lines back into snd_usb_pcm_prepare();
it's even easier to follow than a small useless function
Link: https://lore.kernel.org/r/20220901130831.6136-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One of the former changes for the endpoint management was the more
consistent setup of endpoints at hw_params.
snd_usb_endpoint_configure() is a single function that does the full
setup, and it's called from both PCM hw_params and prepare callbacks.
Although the EP setup at the prepare phase is usually skipped (by
checking need_setup flag), it may be still effective in some cases
like suspend/resume that requires the interface setup again.
As it's a full and single setup, the invocation of
snd_usb_endpoint_configure() includes not only the USB interface setup
but also the buffer release and allocation. OTOH, doing the buffer
release and re-allocation at PCM prepare phase is rather superfluous,
and better to be done only in the hw_params phase.
For those optimizations, this patch splits the endpoint setup to two
phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(),
to be called from hw_params and from prepare, respectively.
Note that this patch changes the driver operation slightly,
effectively moving the USB interface setup again to PCM prepare stage
instead of hw_params stage, while the buffer allocation and such
initializations are still done at hw_params stage.
And, the change of the USB interface setup timing (moving to prepare)
gave an interesting "fix", too: it was reported that the recent
kernels caused silent output at the beginning on playbacks on some
devices on Android, and this change casually fixed the regression.
It seems that those devices are picky about the sample rate change (or
the interface change?), and don't follow the too immediate rate
changes.
Meanwhile, Android operates the PCM in the following order:
- open, then hw_params with the possibly highest sample rate
- close without prepare
- re-open, hw_params with the normal sample rate
- prepare, and start streaming
This procedure ended up the hw_params twice with different rates, and
because the recent kernel did set up the sample rate twice one and
after, it screwed up the device. OTOH, the earlier kernels didn't set
up the USB interface at hw_params, hence this problem didn't appear.
Now, with this patch, the USB interface setup is again back to the
prepare phase, and it works around the problem automagically.
Although we should address the sample rate problem in a more solid
way in future, let's keep things working as before for now.
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Cc: <stable@vger.kernel.org>
Reported-by: chihhao chen <chihhao.chen@mediatek.com>
Link: https://lore.kernel.org/r/87e6d6ae69d68dc588ac9acc8c0f24d6188375c3.camel@mediatek.com
Link: https://lore.kernel.org/r/20220901124136.4984-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hpi_meter_get_peak() function contains the expression
"hm.obj_index = hm.obj_index", which does not carry any semantic load.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 719f82d398 ("ALSA: Add support of AudioScience ASI boards")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Link: https://lore.kernel.org/r/20220901102814.131855-1-goncharenko.vp@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The MCA driver selects COMMON_CLK, which leads to misconfiguration
on platforms with HAVE_LEGACY_CLK (under compile test). Kconfig catches
the conflict with the following warning:
WARNING: unmet direct dependencies detected for COMMON_CLK
Depends on [n]: !HAVE_LEGACY_CLK [=y]
Selected by [m]:
- SND_SOC_APPLE_MCA [=m] && SOUND [=m] && !UML && SND [=m] &&
SND_SOC [=m] && (ARCH_APPLE || COMPILE_TEST [=y])
Eventually the build fails with errors like:
>> drivers/clk/clk.c:867:6: error: redefinition of 'clk_unprepare'
867 | void clk_unprepare(struct clk *clk)
| ^~~~~~~~~~~~~
In file included from drivers/clk/clk.c:9:
include/linux/clk.h:303:20: note: previous definition of 'clk_unprepare' with type 'void(struct clk *)'
303 | static inline void clk_unprepare(struct clk *clk)
| ^~~~~~~~~~~~~
which appears to be because COMMON_CLK is selected but HAVE_CLK_PREPARE
is not. In the end it seems we had no business selecting COMMON_CLK from
an unrelated driver like that, so remove the selection. The linux/clk.h
API is there anyway.
Fixes: 3df5d0d972 ("ASoC: apple: mca: Start new platform driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220901113415.27449-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The WCD934X codec is a Slimbus driver, so it must depend on SLIMBUS,
also for compile tests:
ERROR: modpost: "slim_stream_prepare" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 5b7f4e5de6 ("ASoC: codecs: allow compile testing without MFD drivers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220901101458.365354-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We reset each interface that is being parsed for each stream, but this
is superfluous and even can lead to spurious errors. Since the
interface is set up properly at opening the endpoint for each actual
stream operation, let's drop the superfluous one.
Link: https://lore.kernel.org/r/20220831130021.4762-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the delayed registration is specified via either delayed_register
option or the quirk, we delay the invocation of snd_card_register()
until the given interface. But if a wrong value has been set there
and there are more interfaces over the given interface number,
snd_card_register() call would be missing for those interfaces.
This patch catches up those missing calls by fixing the comparison of
the interface number. Now the call is skipped only if the processed
interface is less than the given interface, instead of the exact
match.
Fixes: b70038ef4f ("ALSA: usb-audio: Add delayed_register option")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The info message that was added in the commit a4aad5636c ("ALSA:
usb-audio: Inform devices that need delayed registration") is actually
useful to know the need for the delayed registration. However, it
turned out that this doesn't catch the all cases; namely, this warned
only when a PCM stream is attached onto the existing PCM instance, but
it doesn't count for a newly created PCM instance. This made
confusion as if there were no further delayed registration.
This patch moves the check to the code path for either adding a stream
or creating a PCM instance. Also, make it simpler by checking the
card->registered flag instead of querying each snd_device state.
Fixes: a4aad5636c ("ALSA: usb-audio: Inform devices that need delayed registration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Small number of cleanups that were either missed in previous versions
or detected by new cppcheck version.
Merge series from Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>:
The purpose of this patch series is to add support for
timestamping on capture direction using the compress
API.
This is simply done by splitting sof_compr_copy into 2
functions: sof_compr_copy_playback and sof_compr_copy_capture.
Each of these functions handles one of the possible directions:
capture or playback and is called in sof_compr_copy based on
the stream's direction.
The only difference between sof_compr_copy_playback and
sof_compr_copy_capture is the fact that on playback case
we need to copy data from user space and on capture we
need to copy data to user space.
sound/soc/ti/omap-mcbsp.c:617:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Link: https://lore.kernel.org/r/20220822184239.169757-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/fsl/fsl_utils.c:127:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220822184239.169757-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/hdmi-codec.c:24:16: style: struct member
'hdmi_codec_channel_ma`p_table::map' is never used. [unusedStructMember]
unsigned char map; /* ALSA API channel map position */
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Link: https://lore.kernel.org/r/20220822184239.169757-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added a new copy function used to copy data to user buffer
in the case of compress capture.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20220822101502.17644-3-laurentiu.mihalcea@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we're preparing to add support for compress capture,
we need to move the content of sof_compr_copy into a
separate function which handles the playback direction just
like the initial sof_compr_copy.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20220822101502.17644-2-laurentiu.mihalcea@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Syed Saba Kareem <Syed.SabaKareem@amd.com>:
Pink Sardine platform is new APU series based on acp6.2 design.
This patch set adds an ASoC driver for the ACP (Audio CoProcessor) block
on AMD Pink Sardine APU with DMIC endpoint support.
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length array
declaration in union audio_infoframe with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for a flexible-array member in a union.
Link: https://github.com/KSPP/linux/issues/193
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/Yw01A+TvF1FWQ588@work
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pink Sardine ACP6.2 drivers can be built by selecting necessary
kernel config option.
The patch enables build support of the same.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220827165657.2343818-11-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ACP6.2 irq handler for handling irq events for ACP IP.
Add pdm irq events handling.
Whenever audio data equal to the PDM watermark level are consumed,
interrupt is generated. Acknowledge the interrupt.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220827165657.2343818-7-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PDM platform driver binds to the platform device created by
ACP6.2 PCI device. PDM driver registers ALSA DMA and CPU DAI
components with ASoC framework.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220827165657.2343818-6-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP6.2 IP has PDM decoder block.
Create a platform device for it, so that the PDM platform driver
can be bound to this device.
Pass PCI resources like MMIO to this platform device.
Create a platform device for generic dmic codec driver.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220827165657.2343818-5-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP is a PCI audio device.
This patch adds PCI driver to bind to this device and get
PCI resources for Pink Sardine Platform.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220827165657.2343818-3-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return value from devm_snd_soc_register_component() directly
instead of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Link: https://lore.kernel.org/r/20220829091319.266068-1-cui.jinpeng2@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Motorola CPCAP, Lochnagar Sound, Rockchip RK817 and Qualcomm
WCD9340/WCD9341 do not depend on parent MFD driver in build time and can
be compile tested without respective MFD part for increased build
coverage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220826093659.1059276-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart