This function always returns 0, and ignores the nofail boolean. Drop the
nofail argument, make the function void return and fix up the callers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The double `without' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It should be better to check pointer firstly, then assign it
to c->rules[]. Refine code a little bit.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix the following coccicheck warning:
net/ceph/crush/mapper.c:1077:8-9: WARNING opportunity for swap()
by using swap() for the swapping of variable values and drop
the tmp variable that is not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
cancel_request() never guaranteed that after its return the OSD
client would be completely done with the OSD request. The callback
(if specified) can still be invoked and a ref can still be held.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
request_reinit() is not only ugly as the comment rightfully suggests,
but also unsafe. Even though it is called with osdc->lock held for
write in all cases, resetting the OSD request refcount can still race
with handle_reply() and result in use-after-free. Taking linger ping
as an example:
handle_timeout thread handle_reply thread
down_read(&osdc->lock)
req = lookup_request(...)
...
finish_request(req) # unregisters
up_read(&osdc->lock)
__complete_request(req)
linger_ping_cb(req)
# req->r_kref == 2 because handle_reply still holds its ref
down_write(&osdc->lock)
send_linger_ping(lreq)
req = lreq->ping_req # same req
# cancel_linger_request is NOT
# called - handle_reply already
# unregistered
request_reinit(req)
WARN_ON(req->r_kref != 1) # fires
request_init(req)
kref_init(req->r_kref)
# req->r_kref == 1 after kref_init
ceph_osdc_put_request(req)
kref_put(req->r_kref)
# req->r_kref == 0 after kref_put, req is freed
<further req initialization/use> !!!
This happens because send_linger_ping() always (re)uses the same OSD
request for watch ping requests, relying on cancel_linger_request() to
unregister it from the OSD client and rip its messages out from the
messenger. send_linger() does the same for watch/notify registration
and watch reconnect requests. Unfortunately cancel_request() doesn't
guarantee that after it returns the OSD client would be completely done
with the OSD request -- a ref could still be held and the callback (if
specified) could still be invoked too.
The original motivation for request_reinit() was inability to deal with
allocation failures in send_linger() and send_linger_ping(). Switching
to using osdc->req_mempool (currently only used by CephFS) respects that
and allows us to get rid of request_reinit().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Just call set_in_bvec in the non-conditional part.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Both msgr1 and msgr2 in crc mode are zero copy in the sense that
message data is read from the socket directly into the destination
buffer. We assume that the destination buffer is stable (i.e. remains
unchanged while it is being read to) though. Otherwise, CRC errors
ensue:
libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706
libceph: osd1 (1)192.168.122.1:6843 bad crc/signature
libceph: bad data crc, calculated 57958023, expected 1805382778
libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc
Introduce rxbounce option to enable use of a bounce buffer when
receiving message data. In particular this is needed if a mapped
image is a Windows VM disk, passed to QEMU. Windows has a system-wide
"dummy" page that may be mapped into the destination buffer (potentially
more than once into the same buffer) by the Windows Memory Manager in
an effort to generate a single large I/O [1][2]. QEMU makes a point of
preserving overlap relationships when cloning I/O vectors, so krbd gets
exposed to this behaviour.
[1] "What Is Really in That MDL?"
https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85)
[2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The recv path of secure mode is intertwined with that of crc mode.
While it's slightly more efficient that way (the ciphertext is read
into the destination buffer and decrypted in place, thus avoiding
two potentially heavy memory allocations for the bounce buffer and
the corresponding sg array), it isn't really amenable to changes.
Sacrifice that edge and align with the send path which always uses
a full-sized bounce buffer (currently there is no other way -- if
the kernel crypto API ever grows support for streaming (piecewise)
en/decryption for GCM [1], we would be able to easily take advantage
of that on both sides).
[1] https://lore.kernel.org/all/20141225202830.GA18794@gondor.apana.org.au/
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
by Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota
and a new mount option for turning on unbuffered I/O mode globally
instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmHpP5ATHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi0TgB/480i2lPHgA3ujJNqo5Q6z+W0vtTA2+
Wx+4rAUgIESJVunbFxvecPbzyUXTe7wWFI11TCVHPpf6GyIIDTD+uHd3kKWtLsfL
Zkk1/2PN9Q5Dh29R+N8rP9NaP8tIaTQjyiO3iqmRZlo+k0Z/lYtWUb+fUP05XlVY
ML/ktW543tkKeYwl3SWdW5MqAAOVGDbTt+L51CraDhVoiUac5ptkP+cmDmIqsnGa
ZHVqpwugxgndEIyuBHDLBps+5/LrEaL10xDhGcMtP9hwGYhyNr6Yj+azfGtHWwOi
jdVsdHDiecUBVtGyZ351Y4pCMOmP0uJif6MOUZFXYYSSeUBUhH8UjgEi
=jcte
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlight is the new mount "device" string syntax implemented by
Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota and
a new mount option for turning on unbuffered I/O mode globally instead
of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"
* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
ceph: move CEPH_SUPER_MAGIC definition to magic.h
ceph: remove redundant Lsx caps check
ceph: add new "nopagecache" option
ceph: don't check for quotas on MDS stray dirs
ceph: drop send metrics debug message
rbd: make const pointer spaces a static const array
ceph: Fix incorrect statfs report for small quota
ceph: mount syntax module parameter
doc: document new CephFS mount device syntax
ceph: record updated mon_addr on remount
ceph: new device mount syntax
libceph: rename parse_fsid() to ceph_parse_fsid() and export
libceph: generalize addr/ip parsing based on delimiter
Support for GFP_NO{FS,IO} and __GFP_NOFAIL has been implemented by
previous patches so we can allow the support for kvmalloc. This will
allow some external users to simplify or completely remove their
helpers.
GFP_NOWAIT semantic hasn't been supported so far but it hasn't been
explicitly documented so let's add a note about that.
ceph_kvmalloc is the first helper to be dropped and changed to kvmalloc.
Link: https://lkml.kernel.org/r/20211122153233.9924-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... as it is too generic. also, use __func__ when logging
rather than hardcoding the function name.
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
... and remove hardcoded function name in ceph_parse_ips().
[ idryomov: delim parameter, drop CEPH_ADDR_PARSE_DEFAULT_DELIM ]
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch moves ceph_osdc_copy_from() function out of libceph code into
cephfs. There are no other users for this function, and there is the need
(in another patch) to access internal ceph_osd_request struct members.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Call to build_initial_monmap() is one stone two birds. Explicitly it
initializes err variable. Implicitly it initializes ->monmap via call to
kzalloc(). We should only declare err and ->monmap is taken care of by
ceph_monc_init() prototype.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add description to fix the following W=1 kernel build warnings:
net/ceph/cls_lock_client.c:28: warning: Function parameter or
member 'osdc' not described in 'ceph_cls_lock'
net/ceph/cls_lock_client.c:28: warning: Function parameter or
member 'oid' not described in 'ceph_cls_lock'
net/ceph/cls_lock_client.c:28: warning: Function parameter or
member 'oloc' not described in 'ceph_cls_lock'
[ idryomov: tweak osdc description ]
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is no necessary to define variable assignment, just return
directly to simplify the steps.
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We never receive authorizer replies with cephx disabled, so it is
bogus. Also, it still uses the old zero-length array style.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Commit 61ca49a910 ("libceph: don't set global_id until we get an
auth ticket") delayed the setting of global_id too much. It is set
only after all tickets are received, but in pre-nautilus clusters an
auth ticket and the service tickets are obtained in separate steps
(for a total of three MAuth replies). When the service tickets are
requested, global_id is used to build an authorizer; if global_id is
still 0 we never get them and fail to establish the session.
Moving the setting of global_id into protocol implementations. This
way global_id can be set exactly when an auth ticket is received, not
sooner nor later.
Fixes: 61ca49a910 ("libceph: don't set global_id until we get an auth ticket")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
There is no result to pass in msgr2 case because authentication
failures are reported through auth_bad_method frame and in MAuth
case an error is returned immediately.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
netfs helper library from Jeff, three new filesystem client metrics
from Xiubo, ceph.dir.rsnaps vxattr from Yanhu and two auth-related
fixes from myself, marked for stable. Interspersed is a smattering
of assorted fixes and cleanups across the filesystem.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmCT8IITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzizgqCACYbyY4Yr/2C8fZsn+P9rd97zRTbcC6
eufTZwnlECLnc89BxJQRk9a2UpDJfC8RMM3/9tmiulc8G4M+ggVbdFQTCzsZox3c
vLAunGeVyfKIY+16Bv2RNuoO3KeeZm5aB3jXJ5QcUPcXmd4XnHKI1FU2ebC56UJb
pxxfHpE6fb59r6Ek1e5uUFyta4KDMrvwXozghuAPEgT1GpKeA9zMIGI0CkQbBHlW
PWHpcahTiT6GWa/d9ud0CnfssiBxVydWyKTz9xppYC6LNdsZUf9tBmYYGRklcjoA
yAwPSuqxNmg+7uWubEawc0+a/3fXORgp2SF7Rbp1XYE+HpfnMF1J+nIn
=IO5c
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Notable items here are
- a series to take advantage of David Howells' netfs helper library
from Jeff
- three new filesystem client metrics from Xiubo
- ceph.dir.rsnaps vxattr from Yanhu
- two auth-related fixes from myself, marked for stable.
Interspersed is a smattering of assorted fixes and cleanups across the
filesystem"
* tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client: (24 commits)
libceph: allow addrvecs with a single NONE/blank address
libceph: don't set global_id until we get an auth ticket
libceph: bump CephXAuthenticate encoding version
ceph: don't allow access to MDS-private inodes
ceph: fix up some bare fetches of i_size
ceph: convert some PAGE_SIZE invocations to thp_size()
ceph: support getting ceph.dir.rsnaps vxattr
ceph: drop pinned_page parameter from ceph_get_caps
ceph: fix inode leak on getattr error in __fh_to_dentry
ceph: only check pool permissions for regular files
ceph: send opened files/pinned caps/opened inodes metrics to MDS daemon
ceph: avoid counting the same request twice or more
ceph: rename the metric helpers
ceph: fix kerneldoc copypasta over ceph_start_io_direct
ceph: use attach/detach_page_private for tracking snap context
ceph: don't use d_add in ceph_handle_snapdir
ceph: don't clobber i_snap_caps on non-I_NEW inode
ceph: fix fall-through warnings for Clang
ceph: convert ceph_readpages to ceph_readahead
ceph: convert ceph_write_begin to netfs_write_begin
...
Normally, an unused OSD id/slot is represented by an empty addrvec.
However, it also appears to be possible to generate an osdmap where
an unused OSD id/slot has an addrvec with a single blank address of
type NONE. Allow such addrvecs and make the end result be exactly
the same as for the empty addrvec case -- leave addr intact.
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
With the introduction of enforcing mode, setting global_id as soon
as we get it in the first MAuth reply will result in EACCES if the
connection is reset before we get the second MAuth reply containing
an auth ticket -- because on retry we would attempt to reclaim that
global_id with no auth ticket at hand.
Neither ceph_auth_client nor ceph_mon_client depend on global_id
being set ealy, so just delay the setting until we get and process
the second MAuth reply. While at it, complain if the monitor sends
a zero global_id or changes our global_id as the session is likely
to fail after that.
Cc: stable@vger.kernel.org # needs backporting for < 5.11
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
A dummy v3 encoding (exactly the same as v2) was introduced so that
the monitors can distinguish broken clients that may not include their
auth ticket in CEPHX_GET_AUTH_SESSION_KEY request on reconnects, thus
failing to prove previous possession of their global_id (one part of
CVE-2021-20288).
The kernel client has always included its auth ticket, so it is
compatible with enforcing mode as is. However we want to bump the
encoding version to avoid having to authenticate twice on the initial
connect -- all legacy (CephXAuthenticate < v3) are now forced do so in
order to expose insecure global_id reclaim.
Marking for stable since at least for 5.11 and 5.12 it is trivial
(v2 -> v3).
Cc: stable@vger.kernel.org # 5.11+
URL: https://tracker.ceph.com/issues/50452
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Modify "inital" to "initial" in net/ceph/osdmap.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 83aff95eb9 ("libceph: remove 'osdtimeout' option") deprecated
osdtimeout over 8 years ago, but it is still recognized. Let's remove
it entirely.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
These options were introduced in 3.19 with support for message signing
and are rather useless, as explained in commit a51983e4dd ("libceph:
add nocephx_sign_messages option"). Deprecate them.
In case there is someone out there with a cluster that lacks support
for MSG_AUTH feature (very unlikely but has to be considered since we
haven't formally raised the bar from argonaut to bobtail yet), make
nocephx_sign_messages also waive MSG_AUTH requirement. This is probably
how it should have been done in the first place -- if we aren't going
to sign, requiring the signing feature makes no sense.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This line dates back to 2013, but cppcheck complained because commit
2f713615dd ("libceph: move msgr1 protocol implementation to its own
file") moved it. Add parenthesis to silence the warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since a few years, kernel addresses are no longer included in oops
dumps, at least on x86. All we get is a symbol name with offset and
size.
This is a problem for ceph_connection_operations handlers, especially
con->ops->dispatch(). All three handlers have the same name and there
is little context to disambiguate between e.g. monitor and OSD clients
because almost everything is inlined. gdb sneakily stops at the first
matching symbol, so one has to resort to nm and addr2line.
Some of these are already prefixed with mon_, osd_ or mds_. Let's do
the same for all others.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Try and avoid leaving bits and pieces of session key and connection
secret (gets split into GCM key and a pair of GCM IVs) around.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
crypto_shash_setkey() and crypto_aead_setkey() will do a (small)
GFP_ATOMIC allocation to align the key if it isn't suitably aligned.
It's not a big deal, but at the same time easy to avoid.
The actual alignment requirement is dynamic, queryable with
crypto_shash_alignmask() and crypto_aead_alignmask(), but shouldn't
be stricter than 16 bytes for our algorithms.
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
auth_signature frame is 68 bytes in plain mode and 96 bytes in
secure mode but we are requesting 68 bytes in both modes. By luck,
this doesn't actually result in any invalid memory accesses because
the allocation is satisfied out of kmalloc-96 slab and so exactly
96 bytes are allocated, but KASAN rightfully complains.
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
adds the option of full in-transit encryption using AES-GCM algorithm
(myself). On top of that we have a series to avoid intermittent
errors during recovery with recover_session=clean and some MDS request
encoding work from Jeff, a cap handling fix and assorted observability
improvements from Luis and Xiubo and a good number of cleanups. Luis
also ran into a corner case with quotas which sadly means that we are
back to denying cross-quota-realm renames.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl/beWITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi4i0CACnvd87l2n7dndig7p5d5lVsmo8tAFs
wHYHaIVisWKMcqKoT+YJajSgzaonxjzvYiyCzwLxV7s7vI7cswAwjEfYT7tTDRp2
pnO1+4N/1ftznnTk/1QdqwOQLUg5UtdgWvFCaXQF+Vr/YroZomKJPaK8fXK882pC
9FBjoLNy1HWySsoXPCxJktmDzpEEyYRNJg0vquxm7mxwTgQErupWlwEFjNg5LBkm
gC0UoKhCE3DeUrXnoq21Ga62RIajxHofTooNx7dg+JiSVgluW+nORaWDYJXNzwLC
j5puSe4pWIah+gmcwIFuyNz4ddkvVL4URvsYPGkVFYXlEefQjErc10Jh
=6b9f
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The big ticket item here is support for msgr2 on-wire protocol, which
adds the option of full in-transit encryption using AES-GCM algorithm
(myself).
On top of that we have a series to avoid intermittent errors during
recovery with recover_session=clean and some MDS request encoding work
from Jeff, a cap handling fix and assorted observability improvements
from Luis and Xiubo and a good number of cleanups.
Luis also ran into a corner case with quotas which sadly means that we
are back to denying cross-quota-realm renames"
* tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client: (59 commits)
libceph: drop ceph_auth_{create,update}_authorizer()
libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1
libceph, ceph: implement msgr2.1 protocol (crc and secure modes)
libceph: introduce connection modes and ms_mode option
libceph, rbd: ignore addr->type while comparing in some cases
libceph, ceph: get and handle cluster maps with addrvecs
libceph: factor out finish_auth()
libceph: drop ac->ops->name field
libceph: amend cephx init_protocol() and build_request()
libceph, ceph: incorporate nautilus cephx changes
libceph: safer en/decoding of cephx requests and replies
libceph: more insight into ticket expiry and invalidation
libceph: move msgr1 protocol specific fields to its own struct
libceph: move msgr1 protocol implementation to its own file
libceph: separate msgr1 protocol implementation
libceph: export remaining protocol independent infrastructure
libceph: export zero_page
libceph: rename and export con->flags bits
libceph: rename and export con->state states
libceph: make con->state an int
...
Implement msgr2.1 wire protocol, available since nautilus 14.2.11
and octopus 15.2.5. msgr2.0 wire protocol is not implemented -- it
has several security, integrity and robustness issues and therefore
considered deprecated.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
msgr2 supports two connection modes: crc (plain) and secure (on-wire
encryption). Connection mode is picked by server based on input from
client.
Introduce ms_mode option:
ms_mode=legacy - msgr1 (default)
ms_mode=crc - crc mode, if denied fail
ms_mode=secure - secure mode, if denied fail
ms_mode=prefer-crc - crc mode, if denied agree to secure mode
ms_mode=prefer-secure - secure mode, if denied agree to crc mode
ms_mode affects all connections, we don't separate connections to mons
like it's done in userspace with ms_client_mode vs ms_mon_client_mode.
For now the default is legacy, to be flipped to prefer-crc after some
time.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For libceph, this ensures that libceph instance sharing (share option)
continues to work. For rbd, this avoids blocklisting alive lock owners
(locker addr is always LEGACY, while watcher addr is ANY in nautilus).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for msgr2, make the cluster send us maps with addrvecs
including both LEGACY and MSGR2 addrs instead of a single LEGACY addr.
This means advertising support for SERVER_NAUTILUS and also some older
features: SERVER_MIMIC, MONENC and MONNAMES.
MONNAMES and MONENC are actually pre-argonaut, we just never updated
ceph_monmap_decode() for them. Decoding is unconditional, see commit
23c625ce30 ("libceph: assume argonaut on the server side").
SERVER_MIMIC doesn't bear any meaning for the kernel client.
Since ceph_decode_entity_addrvec() is guarded by encoding version
checks (and in msgr2 case it is guarded implicitly by the fact that
server is speaking msgr2), we assume MSG_ADDR2 for it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for msgr2, factor out finish_auth() so it is suitable
for both existing MAuth message based authentication and upcoming msgr2
authentication exchange.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In msgr2, initial authentication happens with an exchange of msgr2
control frames -- MAuth message and struct ceph_mon_request_header
aren't used. Make that optional.
Stop reporting cephx protocol as "x". Use "cephx" instead.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- request service tickets together with auth ticket. Currently we get
auth ticket via CEPHX_GET_AUTH_SESSION_KEY op and then request service
tickets via CEPHX_GET_PRINCIPAL_SESSION_KEY op in a separate message.
Since nautilus, desired service tickets are shared togther with auth
ticket in CEPHX_GET_AUTH_SESSION_KEY reply.
- propagate session key and connection secret, if any. In preparation
for msgr2, update handle_reply() and verify_authorizer_reply() auth
ops to propagate session key and connection secret. Since nautilus,
if secure mode is negotiated, connection secret is shared either in
CEPHX_GET_AUTH_SESSION_KEY reply (for mons) or in a final authorizer
reply (for osds and mdses).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make it clear that "need" is a union of "missing" and "have, but up
for renewal" and dout when the ticket goes missing due to expiry or
invalidation by client.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A pure move, no other changes.
Note that ceph_tcp_recv{msg,page}() and ceph_tcp_send{msg,page}()
helpers are also moved. msgr2 will bring its own, more efficient,
variants based on iov_iter. Switching msgr1 to them was considered
but decided against to avoid subtle regressions.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton