- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
-----BEGIN PGP SIGNATURE-----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=Y2TB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
Commit c087c6e7b5 ("objtool: Fix type of reloc::addend") failed to
appreciate cross building from ILP32 hosts, where 'int' == 'long' and
the issue persists.
As such, use s64/int64_t/Elf64_Sxword for this field and suffer the
pain that is ISO C99 printf formats for it.
Fixes: c087c6e7b5 ("objtool: Fix type of reloc::addend")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[peterz: reword changelog, s/long long/s64/]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2205161041260.11556@file01.intranet.prod.int.rdu2.redhat.com
Nathan reported objtool failing with the following messages:
warning: objtool: no non-local symbols !?
warning: objtool: gelf_update_symshndx: invalid section index
The problem is due to commit 4abff6d48d ("objtool: Fix code relocs
vs weak symbols") failing to consider the case where an object would
have no non-local symbols.
The problem that commit tries to address is adding a STB_LOCAL symbol
to the symbol table in light of the ELF spec's requirement that:
In each symbol table, all symbols with STB_LOCAL binding preced the
weak and global symbols. As ``Sections'' above describes, a symbol
table section's sh_info section header member holds the symbol table
index for the first non-local symbol.
The approach taken is to find this first non-local symbol, move that
to the end and then re-use the freed spot to insert a new local symbol
and increment sh_info.
Except it never considered the case of object files without global
symbols and got a whole bunch of details wrong -- so many in fact that
it is a wonder it ever worked :/
Specifically:
- It failed to re-hash the symbol on the new index, so a subsequent
find_symbol_by_index() would not find it at the new location and a
query for the old location would now return a non-deterministic
choice between the old and new symbol.
- It failed to appreciate that the GElf wrappers are not a valid disk
format (it works because GElf is basically Elf64 and we only
support x86_64 atm.)
- It failed to fully appreciate how horrible the libelf API really is
and got the gelf_update_symshndx() call pretty much completely
wrong; with the direct consequence that if inserting a second
STB_LOCAL symbol would require moving the same STB_GLOBAL symbol
again it would completely come unstuck.
Write a new elf_update_symbol() function that wraps all the magic
required to update or create a new symbol at a given index.
Specifically, gelf_update_sym*() require an @ndx argument that is
relative to the @data argument; this means you have to manually
iterate the section data descriptor list and update @ndx.
Fixes: 4abff6d48d ("objtool: Fix code relocs vs weak symbols")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YoPCTEYjoPqE4ZxB@hirez.programming.kicks-ass.net
When build objtool on x86, the generated file inat-tables.c is in
arch/x86/lib instead of arch/x86, use the correct dir to remove it
when make clean.
$ cd tools/objtool
$ make
[...]
GEN arch/x86/lib/inat-tables.c
[...]
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1652258270-6278-2-git-send-email-yangtiezhu@loongson.cn
The '--lto' option is a confusing way of telling objtool to do stack
validation despite it being a linked object. It's no longer needed now
that an explicit '--stackval' option exists. The '--vmlinux' option is
also redundant.
Remove both options in favor of a straightforward '--link' option which
identifies a linked object.
Also, implicitly set '--link' with a warning if the user forgets to do
so and we can tell that it's a linked object. This makes it easier for
manual vmlinux runs.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/dcd3ceffd15a54822c6183e5766d21ad06082b45.1650300597.git.jpoimboe@redhat.com
Objtool has some hacks in place to workaround toolchain limitations
which otherwise would break no-instrumentation rules. Make the hacks
explicit (and optional for other arches) by turning it into a cmdline
option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/b326eeb9c33231b9dfbb925f194ed7ee40edcd7c.1650300597.git.jpoimboe@redhat.com
Objtool secretly does a jump label hack to overcome the limitations of
the toolchain. Make the hack explicit (and optional for other arches)
by turning it into a cmdline option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/3bdcbfdd27ecb01ddec13c04bdf756a583b13d24.1650300597.git.jpoimboe@redhat.com
Now that CONFIG_STACK_VALIDATION is frame-pointer specific, do the same
for the '--stackval' option. Now the '--no-fp' option is redundant and
can be removed.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/f563fa064b3b63d528de250c72012d49e14742a3.1650300597.git.jpoimboe@redhat.com
Extricate ibt from validate_branch() so they can be executed (or ported)
independently from each other.
While shuffling code around, simplify and improve the ibt logic:
- Ignore an explicit list of known sections which reference functions
for reasons other than indirect branching to them. This helps prevent
unnnecesary sealing.
- Warn on missing !ENDBR for all other sections, not just .data and
.rodata. This finds additional warnings, because there are sections
other than .[ro]data which reference function pointers. For example,
the ksymtab sections which are used for exporting symbols.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/fd1435e46bb95f81031b8fb1fa360f5f787e4316.1650300597.git.jpoimboe@redhat.com
To help prevent objtool users from having to do math to convert function
addresses to section addresses, and to help out with finding data
addresses reported by IBT validation, add an option to print the section
address in addition to the function address.
Normal:
vmlinux.o: warning: objtool: fixup_exception()+0x2d1: unreachable instruction
With '--sec-address':
vmlinux.o: warning: objtool: fixup_exception()+0x2d1 (.text+0x76c51): unreachable instruction
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/2cea4d5299d53d1a4c09212a6ad7820aa46fda7a.1650300597.git.jpoimboe@redhat.com
The parentheses in the "func()+off" address output are inconsistent with
how the kernel prints function addresses, breaking Peter's scripts.
Remove them.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/f2bec70312f62ef4f1ea21c134d9def627182ad3.1650300597.git.jpoimboe@redhat.com
Objtool has a fairly singular focus. It runs on object files and does
validations and transformations which can be combined in various ways.
The subcommand model has never been a good fit, making it awkward to
combine and remove options.
Remove the "check" and "orc" subcommands in favor of a more traditional
cmdline option model. This makes it much more flexible to use, and
easier to port individual features to other arches.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/5c61ebf805e90aefc5fa62bc63468ffae53b9df6.1650300597.git.jpoimboe@redhat.com
Split the existing options into two groups: actions, which actually do
something; and options, which modify the actions in some way.
Also there's no need to have short flags for all the non-action options.
Reserve short flags for the more important actions.
While at it:
- change a few of the short flags to be more intuitive
- make option descriptions more consistently descriptive
- sort options in the source like they are when printed
- move options to a global struct
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/9dcaa752f83aca24b1b21f0b0eeb28a0c181c0b0.1650300597.git.jpoimboe@redhat.com
Occasionally objtool driven code patching (think .static_call_sites
.retpoline_sites etc..) goes sideways and it tries to patch an
instruction that doesn't match.
Much head-scatching and cursing later the problem is as outlined below
and affects every section that objtool generates for us, very much
including the ORC data. The below uses .static_call_sites because it's
convenient for demonstration purposes, but as mentioned the ORC
sections, .retpoline_sites and __mount_loc are all similarly affected.
Consider:
foo-weak.c:
extern void __SCT__foo(void);
__attribute__((weak)) void foo(void)
{
return __SCT__foo();
}
foo.c:
extern void __SCT__foo(void);
extern void my_foo(void);
void foo(void)
{
my_foo();
return __SCT__foo();
}
These generate the obvious code
(gcc -O2 -fcf-protection=none -fno-asynchronous-unwind-tables -c foo*.c):
foo-weak.o:
0000000000000000 <foo>:
0: e9 00 00 00 00 jmpq 5 <foo+0x5> 1: R_X86_64_PLT32 __SCT__foo-0x4
foo.o:
0000000000000000 <foo>:
0: 48 83 ec 08 sub $0x8,%rsp
4: e8 00 00 00 00 callq 9 <foo+0x9> 5: R_X86_64_PLT32 my_foo-0x4
9: 48 83 c4 08 add $0x8,%rsp
d: e9 00 00 00 00 jmpq 12 <foo+0x12> e: R_X86_64_PLT32 __SCT__foo-0x4
Now, when we link these two files together, you get something like
(ld -r -o foos.o foo-weak.o foo.o):
foos.o:
0000000000000000 <foo-0x10>:
0: e9 00 00 00 00 jmpq 5 <foo-0xb> 1: R_X86_64_PLT32 __SCT__foo-0x4
5: 66 2e 0f 1f 84 00 00 00 00 00 nopw %cs:0x0(%rax,%rax,1)
f: 90 nop
0000000000000010 <foo>:
10: 48 83 ec 08 sub $0x8,%rsp
14: e8 00 00 00 00 callq 19 <foo+0x9> 15: R_X86_64_PLT32 my_foo-0x4
19: 48 83 c4 08 add $0x8,%rsp
1d: e9 00 00 00 00 jmpq 22 <foo+0x12> 1e: R_X86_64_PLT32 __SCT__foo-0x4
Noting that ld preserves the weak function text, but strips the symbol
off of it (hence objdump doing that funny negative offset thing). This
does lead to 'interesting' unused code issues with objtool when ran on
linked objects, but that seems to be working (fingers crossed).
So far so good.. Now lets consider the objtool static_call output
section (readelf output, old binutils):
foo-weak.o:
Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foo.o:
Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + d
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foos.o:
Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 1d
000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
So we have two patch sites, one in the dead code of the weak foo and one
in the real foo. All is well.
*HOWEVER*, when the toolchain strips unused section symbols it
generates things like this (using new enough binutils):
foo-weak.o:
Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foo.o:
Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + d
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foos.o:
Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 foo + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 foo + d
000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
And now we can see how that foos.o .static_call_sites goes side-ways, we
now have _two_ patch sites in foo. One for the weak symbol at foo+0
(which is no longer a static_call site!) and one at foo+d which is in
fact the right location.
This seems to happen when objtool cannot find a section symbol, in which
case it falls back to any other symbol to key off of, however in this
case that goes terribly wrong!
As such, teach objtool to create a section symbol when there isn't
one.
Fixes: 44f6a7c075 ("objtool: Fix seg fault with Clang non-section symbols")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220419203807.655552918@infradead.org
Objtool's function fallthrough detection only works on C objects.
The distinction between C and assembly objects no longer makes sense
with objtool running on vmlinux.o.
Now that copy_user_64.S has been fixed up, and an objtool sibling call
detection bug has been fixed, the asm code is in "compliance" and this
hack is no longer needed. Remove it.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b434cff98eca3a60dcc64c620d7d5d405a0f441c.1649718562.git.jpoimboe@redhat.com
In add_jump_destinations(), sibling call detection requires 'insn->func'
to be valid. But alternative instructions get their 'func' set in
handle_group_alt(), which runs *after* add_jump_destinations(). So
sibling calls in alternatives code don't get properly detected.
Fix that by changing the initialization order: call
add_special_section_alts() *before* add_jump_destinations().
This also means the special case for a missing 'jump_dest' in
add_jump_destinations() can be removed, as it has already been dealt
with.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c02e0a0a2a4286b5f848d17c77fdcb7e0caf709c.1649718562.git.jpoimboe@redhat.com
For most sibling calls, 'jump_dest' is NULL because objtool treats the
jump like a call and sets 'call_dest'. But there are a few edge cases
where that's not true. Make it consistent to avoid unexpected behavior.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8737d6b9d1691831aed73375f444f0f42da3e2c9.1649718562.git.jpoimboe@redhat.com
When a "!ENDBR" warning is reported for a data section, objtool just
prints the text address of the relocation target twice, without giving
any clues about the location of the original data reference:
vmlinux.o: warning: objtool: dcbnl_netdevice_event()+0x0: .text+0xb64680: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Instead, print the address of the data reference, in addition to the
address of the relocation target.
vmlinux.o: warning: objtool: dcbnl_nb+0x0: .data..read_mostly+0xe260: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Fixes: 89bc853eae ("objtool: Find unused ENDBR instructions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/762e88d51300e8eaf0f933a5b0feae20ac033bea.1650300597.git.jpoimboe@redhat.com
GCC-8 isn't clever enough to figure out that cpu_start_entry() is a
noreturn while objtool is. This results in code after the call in
start_secondary(). Give GCC a hand so that they all agree on things.
vmlinux.o: warning: objtool: start_secondary()+0x10e: unreachable
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220408094718.383658532@infradead.org
Since not all compilers have a function attribute to disable KCOV
instrumentation, objtool can rewrite KCOV instrumentation in noinstr
functions as per commit:
f56dae88a8 ("objtool: Handle __sanitize_cov*() tail calls")
However, this has subtle interaction with the SLS validation from
commit:
1cc1e4c8aa ("objtool: Add straight-line-speculation validation")
In that when a tail-call instrucion is replaced with a RET an
additional INT3 instruction is also written, but is not represented in
the decoded instruction stream.
This then leads to false positive missing INT3 objtool warnings in
noinstr code.
Instead of adding additional struct instruction objects, mark the RET
instruction with retpoline_safe to suppress the warning (since we know
there really is an INT3).
Fixes: 1cc1e4c8aa ("objtool: Add straight-line-speculation validation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220323230712.GA8939@worktop.programming.kicks-ass.net
Objtool reports:
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_blocks_avx() falls through to next function poly1305_blocks_x86_64()
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_emit_avx() falls through to next function poly1305_emit_x86_64()
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_blocks_avx2() falls through to next function poly1305_blocks_x86_64()
Which reads like:
0000000000000040 <poly1305_blocks_x86_64>:
40: f3 0f 1e fa endbr64
...
0000000000000400 <poly1305_blocks_avx>:
400: f3 0f 1e fa endbr64
404: 44 8b 47 14 mov 0x14(%rdi),%r8d
408: 48 81 fa 80 00 00 00 cmp $0x80,%rdx
40f: 73 09 jae 41a <poly1305_blocks_avx+0x1a>
411: 45 85 c0 test %r8d,%r8d
414: 0f 84 2a fc ff ff je 44 <poly1305_blocks_x86_64+0x4>
...
These are simple conditional tail-calls and *should* be recognised as
such by objtool, however due to a mistake in commit 08f87a93c8
("objtool: Validate IBT assumptions") this is failing.
Specifically, the jump_dest is +4, this means the instruction pointed
at will not be ENDBR and as such it will fail the second clause of
is_first_func_insn() that was supposed to capture this exact case.
Instead, have is_first_func_insn() look at the previous instruction.
Fixes: 08f87a93c8 ("objtool: Validate IBT assumptions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220322115125.811582125@infradead.org
Add HOSTPKG_CONFIG to allow tooling that builds the kernel to override
what pkg-config and parameters are used.
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
Find all ENDBR instructions which are never referenced and stick them
in a section such that the kernel can poison them, sealing the
functions from ever being an indirect call target.
This removes about 1-in-4 ENDBR instructions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.763643193@infradead.org
Intel IBT requires that every indirect JMP/CALL targets an ENDBR
instructions, failing this #CP happens and we die. Similarly, all
exception entries should be ENDBR.
Find all code relocations and ensure they're either an ENDBR
instruction or ANNOTATE_NOENDBR. For the exceptions look for
UNWIND_HINT_IRET_REGS at sym+0 not being ENDBR.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.705110141@infradead.org
Intel IBT requires the target of any indirect CALL or JMP instruction
to be the ENDBR instruction; optionally it allows those two
instructions to have a NOTRACK prefix in order to avoid this
requirement.
The kernel will not enable the use of NOTRACK, as such any occurence
of it in compiler generated code should be flagged.
Teach objtool to Decode ENDBR instructions and WARN about NOTRACK
prefixes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.645963517@infradead.org
Read the new NOENDBR annotation. While there, attempt to not bloat
struct instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.586815435@infradead.org
Currently ASM_REACHABLE only works for UD2 instructions; reorder
things to also allow over-riding dead_end_function().
To that end:
- Mark INSN_BUG instructions in decode_instructions(), this saves
having to iterate all instructions yet again.
- Have add_call_destinations() set insn->dead_end for
dead_end_function() calls.
- Move add_dead_ends() *after* add_call_destinations() such that
ASM_REACHABLE can clear the ->dead_end mark.
- have validate_branch() only check ->dead_end.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.410010807@infradead.org
There's a fun implementation detail on linking STB_WEAK symbols. When
the linker combines two translation units, where one contains a weak
function and the other an override for it. It simply strips the
STB_WEAK symbol from the symbol table, but doesn't actually remove the
code.
The result is that when objtool is ran in a whole-archive kind of way,
it will encounter *heaps* of unused (and unreferenced) code. All
rudiments of weak functions.
Additionally, when a weak implementation is split into a .cold
subfunction that .cold symbol is left in place, even though completely
unused.
Teach objtool to ignore such rudiments by searching for symbol holes;
that is, code ranges that fall outside the given symbol bounds.
Specifically, ignore a sequence of unreachable instruction iff they
occupy a single hole, additionally ignore any .cold subfunctions
referenced.
Both ld.bfd and ld.lld behave like this. LTO builds otoh can (and do)
properly DCE weak functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.232019347@infradead.org
In order to prepare for LTO like objtool runs for modules, rename the
duplicate argument to lto.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.172584233@infradead.org
Currently WARN_FUNC() either prints func+off and failing that prints
sec+off, add an intermediate sym+off. This is useful when playing
around with entry code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.461283840@infradead.org
Ignore all INT3 instructions for unreachable code warnings, similar to NOP.
This allows using INT3 for various paddings instead of NOPs.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.343312938@infradead.org
Add a --dry-run argument to skip writing the modifications. This is
convenient for debugging.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.282720146@infradead.org
The ENQCMD instruction implicitly accesses the PASID_MSR to fill in the
pasid field of the descriptor being submitted to an accelerator. But
there is no precise (and stable across kernel changes) point at which
the PASID_MSR is updated from the value for one task to the next.
Kernel code that uses accelerators must always use the ENQCMDS instruction
which does not access the PASID_MSR.
Check for use of the ENQCMD instruction in the kernel and warn on its
usage.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220207230254.3342514-11-fenghua.yu@intel.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
On GCC 12, the build fails due to a possible truncated string:
check.c: In function 'validate_call':
check.c:2865:58: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
2865 | snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);
| ^~
In theory it's a valid bug:
static char pvname[16];
int idx;
...
idx = (rel->addend / sizeof(void *));
snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);
There are only 7 chars for %d while it could take up to 9, so the
printed "pv_ops[%d]" string could get truncated.
In reality the bug should never happen, because pv_ops only has ~80
entries, so 7 chars for the integer is more than enough. Still, it's
worth fixing. Bump the buffer size by 2 bytes to silence the warning.
[ jpoimboe: changed size to 19; massaged changelog ]
Fixes: db2b0c5d7b ("objtool: Support pv_opsindirect calls for noinstr")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Reported-by: Martin Liška <mliska@suse.cz>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220120233748.2062559-1-slyich@gmail.com
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
Borislav Petkov