In following call stack, if unfortunately we lose all chances to truncate
inode page in remove_inode_page, eventually we will add the nid allocated
previously into free nid cache, this nid is with NID_NEW status and with
NEW_ADDR in its blkaddr pointer:
- f2fs_create
- f2fs_add_link
- __f2fs_add_link
- init_inode_metadata
- new_inode_page
- new_node_page
- set_node_addr(, NEW_ADDR)
- f2fs_init_acl failed
- remove_inode_page failed
- handle_failed_inode
- remove_inode_page failed
- iput
- f2fs_evict_inode
- remove_inode_page failed
- alloc_nid_failed cache a nid with valid blkaddr: NEW_ADDR
This may not only cause resource leak of previous inode, but also may cause
incorrect use of the previous blkaddr which is located in NO.nid node entry
when this nid is reused by others.
This patch tries to add this inode to orphan list if we fail to truncate
inode, so that we can obtain a second chance to release it in orphan
recovery flow.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__GFP_NOFAIL can avoid retrying the whole path of kmem_cache_alloc and
bio_alloc.
And, it also fixes the use cases of GFP_ATOMIC correctly.
Suggested-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a routine which checks the block address of newly allocated nid.
If an nid has already allocated by other thread due to subtle data races, it
will result in filesystem corruption.
So, it needs to check whether its block address was already allocated or not
in prior to nid allocation as the last chance.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we can reuse nids as many as possible, we can mitigate producing obsolete
node pages in the page cache.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces __count_free_nids/try_to_free_nids and registers
them in slab shrinker for shrinking under memory pressure.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When there is no enough free nids in free nid cache, we will try to
readahead FREE_NID_PAGES:4 nat pages into page cache of meta_inode,
then, reading nat entries in nat page for adding free nids to free nid
cache.
But when traversing all nat pages we readaheaded in a circulation,
our exit condition is not set right, one more nat page will be scanned
without readaheading, resulting worse read performance.
This patch fixes to read the correct number nat pages to avoid bad
performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes for a caller to handle the page after its bio gets an error.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.
* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
balanced_dirty_ratelimit, completions and dirty_exceeded.
* writeback_chunk_size() and over_bground_thresh() now take @wb
instead of @bdi.
* bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...)
bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...)
bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...)
bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...)
[__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...)
bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...)
bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...)
* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
respectively. Note that explicit zeroing is dropped in the process
as wb's are cleared in entirety anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
v2: Typo in description fixed as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch adds encryption support in read and write paths.
Note that, in f2fs, we need to consider cleaning operation.
In cleaning procedure, we must avoid encrypting and decrypting written blocks.
So, this patch implements move_encrypted_block().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In set_node_addr, we try to lookup cached nat entry of inode and then
set flag in it.
But previously in this function, we have already grabbed nat entry with
current node id, if the node id is the same as the one of inode, we
do not need to lookup it in cache again.
So this patch adds condition judgment for reducing unneeded lookup.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
has_fsynced_inode() has no other caller out of node.c, make it static.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
nm_i->nat_tree_lock is used to sync both the operations of nat entry
cache tree and nat set cache tree, however, it isn't held when flush
nat entries during checkpoint which lead to potential race, this patch
fix it by holding the lock when gang lookup nat set cache and delete
item from nat set cache.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode has inline_data, it should report -ENOENT when accessing out-of-bound
region.
This is used by f2fs_fiemap which treats -ENOENT with no error.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If page's on-disk block was deallocated, let's remove up-to-date flag to avoid
further access with wrong contents.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds core functions including slab cache init function and
init/lookup/update/shrink/destroy function for rb-tree based extent cache.
Thank Jaegeuk Kim and Changman Lee as they gave much suggestion about detail
design and implementation of extent cache.
Todo:
* register rb-based extent cache shrink with mm shrink interface.
v2:
o move set_extent_info and __is_{extent,back,front}_mergeable into f2fs.h.
o introduce __{attach,detach}_extent_node for code readability.
o add cond_resched() when fail to invoke kmem_cache_alloc/radix_tree_insert.
o fix some coding style and typo issues.
v3:
o fix oops due to using an unassigned pointer.
o use list_del to remove extent node in shrink list.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: add static for some funcitons and declare in f2fs.h]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes the following test.
This causes:
attempt to access beyond end of device
sdb2: rw=16384, want=14413962000, limit=16777216
The reason is:
- f2fs_write_begin
- f2fs_convert_inline_inode returns -ENOSPC
- f2fs_write_failed
- truncate_blocks
- truncate_partial_data_page
- find_data_page
- get_dnode_of_data returns wrong data index retrieved from inline_data
- f2fs_submit_page_bio(wrong data index)
- submit_bio(wrong data index)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In get_node_page, if the page is up-to-date, we assumed that the page was not
reclaimed at all.
But, sometimes it was reported that its contents was missing.
So, just for sure, let's check its mapping and contents.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch merges ->{invalidate,release}page function for meta/node/data pages.
After this, duplication of codes could be removed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, there are several variables with Boolean type as below:
struct f2fs_sb_info {
...
int s_dirty;
bool need_fsck;
bool s_closing;
...
bool por_doing;
...
}
For this there are some issues:
1. there are some space of f2fs_sb_info is wasted due to aligning after Boolean
type variables by compiler.
2. if we continuously add new flag into f2fs_sb_info, structure will be messed
up.
So in this patch, we try to:
1. switch s_dirty to Boolean type variable since it has two status 0/1.
2. merge s_dirty/need_fsck/s_closing/por_doing variables into s_flag.
3. introduce an enum type which can indicate different states of sbi.
4. use new introduced universal interfaces is_sbi_flag_set/{set,clear}_sbi_flag
to operate flags for sbi.
After that, above issues will be fixed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the normal case, the radix_tree_nodes are freed successfully.
But, when cp_error was detected, we should destroy them forcefully.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use more common function ra_meta_pages() with META_POR to readahead node blocks
in restore_node_summary() instead of ra_sum_pages(), hence we can simplify the
readahead code there, and also we can remove unused function ra_sum_pages().
changes from v2:
o use invalidate_mapping_pages as before suggested by Changman Lee.
changes from v1:
o fix one bug when using truncate_inode_pages_range which is pointed out by
Jaegeuk Kim.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch moves one member of struct nat_entry: _flag_ to struct node_info,
so _version_ in struct node_info and _flag_ which are unsigned char type will
merge to one 32-bit space in register/memory. So the size of nat_entry will be
reduced from 28 bytes to 24 bytes (for 64-bit machine, reduce its size from 40
bytes to 32 bytes) and then slab memory using by f2fs will be reduced.
changes from v2:
o update description of memory usage gain for 64-bit machine suggested by
Changman Lee.
changes from v1:
o introduce inline copy_node_info() to copy valid data from node info suggested
by Jaegeuk Kim, it can avoid bug.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two new ioctls to release inmemory pages grabbed by atomic
writes.
o f2fs_ioc_abort_volatile_write
- If transaction was failed, all the grabbed pages and data should be written.
o f2fs_ioc_release_volatile_write
- This is to enhance the performance of PERSIST mode in sqlite.
In order to avoid huge memory consumption which causes OOM, this patch changes
volatile writes to use normal dirty pages, instead blocked flushing to the disk
as long as system does not suffer from memory pressure.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to force to write dirty_exceeded for f2fs_balance_fs_bg.
This flag was only meaningful to write bypassing conditions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revists retrial paths in f2fs.
The basic idea is to use cond_resched instead of retrying from the very early
stage.
Suggested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to fix:
BUG: using smp_processor_id() in preemptible [00000000] code: f2fs_gc-254:0/384
(radix_tree_node_alloc+0x14/0x74) from [<c033d8a0>] (radix_tree_insert+0x110/0x200)
(radix_tree_insert+0x110/0x200) from [<c02e8264>] (gc_data_segment+0x340/0x52c)
(gc_data_segment+0x340/0x52c) from [<c02e8658>] (f2fs_gc+0x208/0x400)
(f2fs_gc+0x208/0x400) from [<c02e8a98>] (gc_thread_func+0x248/0x28c)
(gc_thread_func+0x248/0x28c) from [<c0139944>] (kthread+0xa0/0xac)
(kthread+0xa0/0xac) from [<c0105ef8>] (ret_from_fork+0x14/0x3c)
The reason is that f2fs calls radix_tree_insert under enabled preemption.
So, before calling it, we need to call radix_tree_preload.
Otherwise, we should use _GFP_WAIT for the radix tree, and use mutex or
semaphore to cover the radix tree operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previoulsy, we used rwlock for nat_entry lock.
But, now we have a lot of complex operations in set_node_addr.
(e.g., allocating kernel memories, handling radix_trees, and so on)
So, this patches tries to change spinlock to rw_semaphore to give CPUs to other
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After flushing dirty nat entries, it has to be no more dirty nat
entries.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's meaningless to check dirty_nat_cnt after re-dirtying nat entries in
journal. And although there are rooms for dirty nat entires if dirty_nat_cnt
is zero, it's also meaningless to check __has_cursum_space.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Two jump labels were adjusted in the implementation of the
create_node_manager_caches() function because these identifiers
contained typos.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a node page is request to be written during the reclaiming path, we should
submit the bio to avoid pending to recliam it.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we have three inode cache: ORPHAN_INO, APPEND_INO, UPDATE_INO,
and we manage fields related to inode cache separately in struct f2fs_sb_info
for each inode cache type.
This makes codes a bit messy, so that this patch intorduce a new struct
inode_management to wrap inner fields as following which make codes more neat.
/* for inner inode cache management */
struct inode_management {
struct radix_tree_root ino_root; /* ino entry array */
spinlock_t ino_lock; /* for ino entry lock */
struct list_head ino_list; /* inode list head */
unsigned long ino_num; /* number of entries */
};
struct f2fs_sb_info {
...
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
...
}
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to write node pages if checkpoint is not doing in order to avoid
memory pressure.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to control the memory footprint used by ino entries.
This will conduct best effort, not strictly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs tries to reorganize the dirty nat entries into multiple sets
according to its nid ranges. This can improve the flushing nat pages, however,
if there are a lot of cached nat entries, it becomes a bottleneck.
This patch introduces a new set management flow by removing dirty nat list and
adding a series of set operations when the nat entry becomes dirty.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a flag in the nat entry structure to merge various
information such as checkpointed and fsync_done marks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In commit aec71382c6 ("f2fs: refactor flush_nat_entries codes for reducing NAT
writes"), we descripte the issue as below:
"Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time."
Actually, we have the same problem in using SIT journal area.
In this patch, firstly we will update sit journal with dirty entries as many as
possible. Secondly if there is no space in sit journal, we will remove all
entries in journal and walk through the whole dirty entry bitmap of sit,
accounting dirty sit entries located in same SIT block to sit entry set. All
entry sets are linked to list sit_entry_set in sm_info, sorted ascending order
by count of entries in set. Later we flush entries in set which have fewest
entries into journal as many as we can, and then flush dense set with merged
entries to disk.
In this way we can use sit journal area more effectively, also we will reduce
SIT update, result in gaining in performance and saving lifetime of flash
device.
In my testing environment, it shows this patch can help to reduce SIT block
update obviously.
virtual machine + hard disk:
fsstress -p 20 -n 400 -l 5
sit page num cp count sit pages/cp
based 2006.50 1349.75 1.486
patched 1566.25 1463.25 1.070
Our latency of merging op is small when handling a great number of dirty SIT
entries in flush_sit_entries:
latency(ns) dirty sit count
36038 2151
49168 2123
37174 2232
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu