The parameter @len is not really used in btrfs_bio_fits_in_stripe(),
just remove it.
It got removed in 4203431319 ("btrfs: let callers of
btrfs_get_io_geometry pass the em"), before that btrfs_get_chunk_map
utilized it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add sysfs interface to limit io during scrub. We relied on the ionice
interface to do that, eg. the idle class let the system usable while
scrub was running. This has changed when mq-deadline got widespread and
did not implement the scheduling classes. That was a CFQ thing that got
deleted. We've got numerous complaints from users about degraded
performance.
Currently only BFQ supports that but it's not a common scheduler and we
can't ask everybody to switch to it.
Alternatively the cgroup io limiting can be used but that also a
non-trivial setup (v2 required, the controller must be enabled on the
system). This can still be used if desired.
Other ideas that have been explored: piggy-back on ionice (that is set
per-process and is accessible) and interpret the class and classdata as
bandwidth limits, but this does not have enough flexibility as there are
only 8 allowed and we'd have to map fixed limits to each value. Also
adjusting the value would need to lookup the process that currently runs
scrub on the given device, and the value is not sticky so would have to
be adjusted each time scrub runs.
Running out of options, sysfs does not look that bad:
- it's accessible from scripts, or udev rules
- the name is similar to what MD-RAID has
(/proc/sys/dev/raid/speed_limit_max or /sys/block/mdX/md/sync_speed_max)
- the value is sticky at least for filesystem mount time
- adjusting the value has immediate effect
- sysfs is available in constrained environments (eg. system rescue)
- the limit also applies to device replace
Sysfs:
- raw value is in bytes
- values written to the file accept suffixes like K, M
- file is in the per-device directory /sys/fs/btrfs/FSID/devinfo/DEVID/scrub_speed_max
- 0 means use default priority of IO
The scheduler is a simple deadline one and the accuracy is up to nearest
128K.
Signed-off-by: David Sterba <dsterba@suse.com>
When a file gets deleted on a zoned file system, the space freed is not
returned back into the block group's free space, but is migrated to
zone_unusable.
As this zone_unusable space is behind the current write pointer it is not
possible to use it for new allocations. In the current implementation a
zone is reset once all of the block group's space is accounted as zone
unusable.
This behaviour can lead to premature ENOSPC errors on a busy file system.
Instead of only reclaiming the zone once it is completely unusable,
kick off a reclaim job once the amount of unusable bytes exceeds a user
configurable threshold between 51% and 100%. It can be set per mounted
filesystem via the sysfs tunable bg_reclaim_threshold which is set to 75%
by default.
Similar to reclaiming unused block groups, these dirty block groups are
added to a to_reclaim list and then on a transaction commit, the reclaim
process is triggered but after we deleted unused block groups, which will
free space for the relocation process.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a bad checksum is found and if the filesystem has a mirror of the
damaged data, we read the correct data from the mirror and writes it to
damaged blocks. This however, violates the sequential write constraints
of a zoned block device.
We can consider three methods to repair an IO failure in zoned filesystems:
(1) Reset and rewrite the damaged zone
(2) Allocate new device extent and replace the damaged device extent to
the new extent
(3) Relocate the corresponding block group
Method (1) is most similar to a behavior done with regular devices.
However, it also wipes non-damaged data in the same device extent, and
so it unnecessary degrades non-damaged data.
Method (2) is much like device replacing but done in the same device. It
is safe because it keeps the device extent until the replacing finish.
However, extending device replacing is non-trivial. It assumes
"src_dev->physical == dst_dev->physical". Also, the extent mapping
replacing function should be extended to support replacing device extent
position in one device.
Method (3) invokes relocation of the damaged block group and is
straightforward to implement. It relocates all the mirrored device
extents, so it potentially is a more costly operation than method (1) or
(2). But it relocates only used extents which reduce the total IO size.
Let's apply method (3) for now. In the future, we can extend device-replace
and apply method (2).
For protecting a block group gets relocated multiple time with multiple
IO errors, this commit introduces "relocating_repair" bit to show it's
now relocating to repair IO failures. Also it uses a new kthread
"btrfs-relocating-repair", not to block IO path with relocating process.
This commit also supports repairing in the scrub process.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Zoned filesystems use REQ_OP_ZONE_APPEND bios for writing to actual
devices.
Let btrfs_end_bio() and btrfs_op be aware of it, by mapping
REQ_OP_ZONE_APPEND to BTRFS_MAP_WRITE and using btrfs_op() instead of
bio_op().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement a zoned chunk and device extent allocator. One device zone
becomes a device extent so that a zone reset affects only this device
extent and does not change the state of blocks in the neighbor device
extents.
To implement the allocator, we need to extend the following functions for
a zoned filesystem.
- init_alloc_chunk_ctl
- dev_extent_search_start
- dev_extent_hole_check
- decide_stripe_size
init_alloc_chunk_ctl_zoned() is mostly the same as regular one. It always
set the stripe_size to the zone size and aligns the parameters to the zone
size.
dev_extent_search_start() only aligns the start offset to zone boundaries.
We don't care about the first 1MB like in regular filesystem because we
anyway reserve the first two zones for superblock logging.
dev_extent_hole_check_zoned() checks if zones in given hole are either
conventional or empty sequential zones. Also, it skips zones reserved for
superblock logging.
With the change to the hole, the new hole may now contain pending extents.
So, in this case, loop again to check that.
Finally, decide_stripe_size_zoned() should shrink the number of devices
instead of stripe size because we need to honor stripe_size == zone_size.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before this change, the btrfs_get_io_geometry() function was calling
btrfs_get_chunk_map() to get the extent mapping, necessary for
calculating the I/O geometry. It was using that extent mapping only
internally and freeing the pointer after its execution.
That resulted in calling btrfs_get_chunk_map() de facto twice by the
__btrfs_map_block() function. It was calling btrfs_get_io_geometry()
first and then calling btrfs_get_chunk_map() directly to get the extent
mapping, used by the rest of the function.
Change that to passing the extent mapping to the btrfs_get_io_geometry()
function as an argument.
This could improve performance in some cases. For very large
filesystems, i.e. several thousands of allocated chunks, not only this
avoids searching two times the rbtree, saving time, it may also help
reducing contention on the lock that protects the tree - thinking of
writeback starting for multiple inodes, other tasks allocating or
removing chunks, and anything else that requires access to the rbtree.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Michal Rostecki <mrostecki@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add Filipe's analysis ]
Signed-off-by: David Sterba <dsterba@suse.com>
This effectively reverts commit d5c8238849 ("btrfs: convert
data_seqcount to seqcount_mutex_t").
While running fstests on 32 bits test box, many tests failed because of
warnings in dmesg. One of those warnings (btrfs/003):
[66.441317] WARNING: CPU: 6 PID: 9251 at include/linux/seqlock.h:279 btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
[66.441446] CPU: 6 PID: 9251 Comm: btrfs Tainted: G O 5.11.0-rc4-custom+ #5
[66.441449] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
[66.441451] EIP: btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
[66.441472] EAX: 00000000 EBX: 00000001 ECX: c576070c EDX: c6b15803
[66.441475] ESI: 10000000 EDI: 00000000 EBP: c56fbcfc ESP: c56fbc70
[66.441477] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246
[66.441481] CR0: 80050033 CR2: 05c8da20 CR3: 04b20000 CR4: 00350ed0
[66.441485] Call Trace:
[66.441510] btrfs_relocate_chunk+0xb1/0x100 [btrfs]
[66.441529] ? btrfs_lookup_block_group+0x17/0x20 [btrfs]
[66.441562] btrfs_balance+0x8ed/0x13b0 [btrfs]
[66.441586] ? btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
[66.441619] ? __this_cpu_preempt_check+0xf/0x11
[66.441643] btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
[66.441664] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441683] btrfs_ioctl+0x414/0x2ae0 [btrfs]
[66.441700] ? __lock_acquire+0x35f/0x2650
[66.441717] ? lockdep_hardirqs_on+0x87/0x120
[66.441720] ? lockdep_hardirqs_on_prepare+0xd0/0x1e0
[66.441724] ? call_rcu+0x2d3/0x530
[66.441731] ? __might_fault+0x41/0x90
[66.441736] ? kvm_sched_clock_read+0x15/0x50
[66.441740] ? sched_clock+0x8/0x10
[66.441745] ? sched_clock_cpu+0x13/0x180
[66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441768] __ia32_sys_ioctl+0x165/0x8a0
[66.441773] ? __this_cpu_preempt_check+0xf/0x11
[66.441785] ? __might_fault+0x89/0x90
[66.441791] __do_fast_syscall_32+0x54/0x80
[66.441796] do_fast_syscall_32+0x32/0x70
[66.441801] do_SYSENTER_32+0x15/0x20
[66.441805] entry_SYSENTER_32+0x9f/0xf2
[66.441808] EIP: 0xab7b5549
[66.441814] EAX: ffffffda EBX: 00000003 ECX: c4009420 EDX: bfa91f5c
[66.441816] ESI: 00000003 EDI: 00000001 EBP: 00000000 ESP: bfa91e98
[66.441818] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292
[66.441833] irq event stamp: 42579
[66.441835] hardirqs last enabled at (42585): [<c60eb065>] console_unlock+0x495/0x590
[66.441838] hardirqs last disabled at (42590): [<c60eafd5>] console_unlock+0x405/0x590
[66.441840] softirqs last enabled at (41698): [<c601b76c>] call_on_stack+0x1c/0x60
[66.441843] softirqs last disabled at (41681): [<c601b76c>] call_on_stack+0x1c/0x60
========================================================================
btrfs_remove_chunk+0x58b/0x7b0:
__seqprop_mutex_assert at linux/./include/linux/seqlock.h:279
(inlined by) btrfs_device_set_bytes_used at linux/fs/btrfs/volumes.h:212
(inlined by) btrfs_remove_chunk at linux/fs/btrfs/volumes.c:2994
========================================================================
The warning is produced by lockdep_assert_held() in
__seqprop_mutex_assert() if CONFIG_LOCKDEP is enabled.
And "olumes.c:2994 is btrfs_device_set_bytes_used() with mutex lock
fs_info->chunk_mutex held already.
After adding some debug prints, the cause was found that many
__alloc_device() are called with NULL @fs_info (during scanning ioctl).
Inside the function, btrfs_device_data_ordered_init() is expanded to
seqcount_mutex_init(). In this scenario, its second
parameter info->chunk_mutex is &NULL->chunk_mutex which equals
to offsetof(struct btrfs_fs_info, chunk_mutex) unexpectedly. Thus,
seqcount_mutex_init() is called in wrong way. And later
btrfs_device_get/set helpers trigger lockdep warnings.
The device and filesystem object lifetimes are different and we'd have
to synchronize initialization of the btrfs_device::data_seqcount with
the fs_info, possibly using some additional synchronization. It would
still not prevent concurrent access to the seqcount lock when it's used
for read and initialization.
Commit d5c8238849 ("btrfs: convert data_seqcount to seqcount_mutex_t")
does not mention a particular problem being fixed so revert should not
cause any harm and we'll get the lockdep warning fixed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210139
Reported-by: Erhard F <erhard_f@mailbox.org>
Fixes: d5c8238849 ("btrfs: convert data_seqcount to seqcount_mutex_t")
CC: stable@vger.kernel.org # 5.10
CC: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a zoned block device is found, get its zone information (number of
zones and zone size). To avoid costly run-time zone report
commands to test the device zones type during block allocation, attach
the seq_zones bitmap to the device structure to indicate if a zone is
sequential or accept random writes. Also it attaches the empty_zones
bitmap to indicate if a zone is empty or not.
This patch also introduces the helper function btrfs_dev_is_sequential()
to test if the zone storing a block is a sequential write required zone
and btrfs_dev_is_empty_zone() to test if the zone is a empty zone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 343694eee8d8 ("btrfs: switch seed device to list api"), missed to
check if the parameter seed is true in the function btrfs_find_device().
This tells it whether to traverse the seed device list or not.
After this commit, the argument is unused and can be removed.
In device_list_add() it's not necessary because fs_devices always points
to the device's fs_devices. So with the devid+uuid matching, it will
find the right device and return, thus not needing to traverse seed
devices.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit cf89af146b ("btrfs: dev-replace: fail mount if we don't have
replace item with target device") dropped the multi stage operation of
btrfs_free_extra_devids() that does not need to check replace target
anymore and we can remove the 'step' argument.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As of now, we use the pid method to read striped mirrored data, which
means process id determines the stripe id to read. This type of routing
typically helps in a system with many small independent processes tying
to read random data. On the other hand, the pid based read IO policy is
inefficient because if there is a single process trying to read a large
file, the overall disk bandwidth remains underutilized.
So this patch introduces a read policy framework so that we could add
more read policies, such as IO routing based on the device's wait-queue
or manual when we have a read-preferred device or a policy based on the
target storage caching.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
By doing so we can associate the sequence counter to the chunk_mutex
for lockdep purposes (compiled-out otherwise), the mutex is otherwise
used on the write side.
Also avoid explicitly disabling preemption around the write region as it
will now be done automatically by the seqcount machinery based on the
lock type.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Very sporadically I had test case btrfs/069 from fstests hanging (for
years, it is not a recent regression), with the following traces in
dmesg/syslog:
[162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started
[162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
[162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished
[162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds.
[162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000
[162513.514751] Call Trace:
[162513.514761] __schedule+0x5ce/0xd00
[162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.514771] schedule+0x46/0xf0
[162513.514844] wait_current_trans+0xde/0x140 [btrfs]
[162513.514850] ? finish_wait+0x90/0x90
[162513.514864] start_transaction+0x37c/0x5f0 [btrfs]
[162513.514879] transaction_kthread+0xa4/0x170 [btrfs]
[162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs]
[162513.514894] kthread+0x153/0x170
[162513.514897] ? kthread_stop+0x2c0/0x2c0
[162513.514902] ret_from_fork+0x22/0x30
[162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds.
[162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000
[162513.515682] Call Trace:
[162513.515688] __schedule+0x5ce/0xd00
[162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.515697] schedule+0x46/0xf0
[162513.515712] wait_current_trans+0xde/0x140 [btrfs]
[162513.515716] ? finish_wait+0x90/0x90
[162513.515729] start_transaction+0x37c/0x5f0 [btrfs]
[162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
[162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs]
[162513.515758] ? __ia32_sys_fdatasync+0x20/0x20
[162513.515761] iterate_supers+0x87/0xf0
[162513.515765] ksys_sync+0x60/0xb0
[162513.515768] __do_sys_sync+0xa/0x10
[162513.515771] do_syscall_64+0x33/0x80
[162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.515781] RIP: 0033:0x7f5238f50bd7
[162513.515782] Code: Bad RIP value.
[162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
[162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
[162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a
[162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0
[162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a
[162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
[162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds.
[162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000
[162513.516620] Call Trace:
[162513.516625] __schedule+0x5ce/0xd00
[162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.516634] schedule+0x46/0xf0
[162513.516647] wait_current_trans+0xde/0x140 [btrfs]
[162513.516650] ? finish_wait+0x90/0x90
[162513.516662] start_transaction+0x4d7/0x5f0 [btrfs]
[162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs]
[162513.516686] __vfs_setxattr+0x66/0x80
[162513.516691] __vfs_setxattr_noperm+0x70/0x200
[162513.516697] vfs_setxattr+0x6b/0x120
[162513.516703] setxattr+0x125/0x240
[162513.516709] ? lock_acquire+0xb1/0x480
[162513.516712] ? mnt_want_write+0x20/0x50
[162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0
[162513.516723] ? preempt_count_add+0x49/0xa0
[162513.516725] ? __sb_start_write+0x19b/0x290
[162513.516727] ? preempt_count_add+0x49/0xa0
[162513.516732] path_setxattr+0xba/0xd0
[162513.516739] __x64_sys_setxattr+0x27/0x30
[162513.516741] do_syscall_64+0x33/0x80
[162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.516745] RIP: 0033:0x7f5238f56d5a
[162513.516746] Code: Bad RIP value.
[162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc
[162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a
[162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470
[162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700
[162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004
[162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0
[162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds.
[162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000
[162513.517780] Call Trace:
[162513.517786] __schedule+0x5ce/0xd00
[162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.517796] schedule+0x46/0xf0
[162513.517810] wait_current_trans+0xde/0x140 [btrfs]
[162513.517814] ? finish_wait+0x90/0x90
[162513.517829] start_transaction+0x37c/0x5f0 [btrfs]
[162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
[162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs]
[162513.517862] ? __ia32_sys_fdatasync+0x20/0x20
[162513.517865] iterate_supers+0x87/0xf0
[162513.517869] ksys_sync+0x60/0xb0
[162513.517872] __do_sys_sync+0xa/0x10
[162513.517875] do_syscall_64+0x33/0x80
[162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.517881] RIP: 0033:0x7f5238f50bd7
[162513.517883] Code: Bad RIP value.
[162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
[162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
[162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053
[162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0
[162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053
[162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
[162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds.
[162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000
[162513.519160] Call Trace:
[162513.519165] __schedule+0x5ce/0xd00
[162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.519174] schedule+0x46/0xf0
[162513.519190] wait_current_trans+0xde/0x140 [btrfs]
[162513.519193] ? finish_wait+0x90/0x90
[162513.519206] start_transaction+0x4d7/0x5f0 [btrfs]
[162513.519222] btrfs_create+0x57/0x200 [btrfs]
[162513.519230] lookup_open+0x522/0x650
[162513.519246] path_openat+0x2b8/0xa50
[162513.519270] do_filp_open+0x91/0x100
[162513.519275] ? find_held_lock+0x32/0x90
[162513.519280] ? lock_acquired+0x33b/0x470
[162513.519285] ? do_raw_spin_unlock+0x4b/0xc0
[162513.519287] ? _raw_spin_unlock+0x29/0x40
[162513.519295] do_sys_openat2+0x20d/0x2d0
[162513.519300] do_sys_open+0x44/0x80
[162513.519304] do_syscall_64+0x33/0x80
[162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.519309] RIP: 0033:0x7f5238f4a903
[162513.519310] Code: Bad RIP value.
[162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
[162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903
[162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470
[162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002
[162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013
[162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620
[162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds.
[162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002
[162513.520511] Call Trace:
[162513.520516] __schedule+0x5ce/0xd00
[162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.520525] schedule+0x46/0xf0
[162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs]
[162513.520548] ? finish_wait+0x90/0x90
[162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs]
[162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs]
[162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs]
[162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs]
[162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs]
[162513.520643] ? do_sigaction+0xf3/0x240
[162513.520645] ? find_held_lock+0x32/0x90
[162513.520648] ? do_sigaction+0xf3/0x240
[162513.520651] ? lock_acquired+0x33b/0x470
[162513.520655] ? _raw_spin_unlock_irq+0x24/0x50
[162513.520657] ? lockdep_hardirqs_on+0x7d/0x100
[162513.520660] ? _raw_spin_unlock_irq+0x35/0x50
[162513.520662] ? do_sigaction+0xf3/0x240
[162513.520671] ? __x64_sys_ioctl+0x83/0xb0
[162513.520672] __x64_sys_ioctl+0x83/0xb0
[162513.520677] do_syscall_64+0x33/0x80
[162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.520681] RIP: 0033:0x7fc3cd307d87
[162513.520682] Code: Bad RIP value.
[162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87
[162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003
[162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003
[162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001
[162513.520703]
Showing all locks held in the system:
[162513.520712] 1 lock held by khungtaskd/54:
[162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197
[162513.520728] 1 lock held by in:imklog/596:
[162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60
[162513.520782] 1 lock held by btrfs-transacti/1356167:
[162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs]
[162513.520798] 1 lock held by btrfs/1356190:
[162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60
[162513.520805] 1 lock held by fsstress/1356184:
[162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
[162513.520811] 3 locks held by fsstress/1356185:
[162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
[162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120
[162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
[162513.520833] 1 lock held by fsstress/1356196:
[162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
[162513.520838] 3 locks held by fsstress/1356197:
[162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
[162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50
[162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
[162513.520858] 2 locks held by btrfs/1356211:
[162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs]
[162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
This was weird because the stack traces show that a transaction commit,
triggered by a device replace operation, is blocking trying to pause any
running scrubs but there are no stack traces of blocked tasks doing a
scrub.
After poking around with drgn, I noticed there was a scrub task that was
constantly running and blocking for shorts periods of time:
>>> t = find_task(prog, 1356190)
>>> prog.stack_trace(t)
#0 __schedule+0x5ce/0xcfc
#1 schedule+0x46/0xe4
#2 schedule_timeout+0x1df/0x475
#3 btrfs_reada_wait+0xda/0x132
#4 scrub_stripe+0x2a8/0x112f
#5 scrub_chunk+0xcd/0x134
#6 scrub_enumerate_chunks+0x29e/0x5ee
#7 btrfs_scrub_dev+0x2d5/0x91b
#8 btrfs_ioctl+0x7f5/0x36e7
#9 __x64_sys_ioctl+0x83/0xb0
#10 do_syscall_64+0x33/0x77
#11 entry_SYSCALL_64+0x7c/0x156
Which corresponds to:
int btrfs_reada_wait(void *handle)
{
struct reada_control *rc = handle;
struct btrfs_fs_info *fs_info = rc->fs_info;
while (atomic_read(&rc->elems)) {
if (!atomic_read(&fs_info->reada_works_cnt))
reada_start_machine(fs_info);
wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
(HZ + 9) / 10);
}
(...)
So the counter "rc->elems" was set to 1 and never decreased to 0, causing
the scrub task to loop forever in that function. Then I used the following
script for drgn to check the readahead requests:
$ cat dump_reada.py
import sys
import drgn
from drgn import NULL, Object, cast, container_of, execscript, \
reinterpret, sizeof
from drgn.helpers.linux import *
mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"
mnt = None
for mnt in for_each_mount(prog, dst = mnt_path):
pass
if mnt is None:
sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
sys.exit(1)
fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)
def dump_re(re):
nzones = re.nzones.value_()
print(f're at {hex(re.value_())}')
print(f'\t logical {re.logical.value_()}')
print(f'\t refcnt {re.refcnt.value_()}')
print(f'\t nzones {nzones}')
for i in range(nzones):
dev = re.zones[i].device
name = dev.name.str.string_()
print(f'\t\t dev id {dev.devid.value_()} name {name}')
print()
for _, e in radix_tree_for_each(fs_info.reada_tree):
re = cast('struct reada_extent *', e)
dump_re(re)
$ drgn dump_reada.py
re at 0xffff8f3da9d25ad8
logical 38928384
refcnt 1
nzones 1
dev id 0 name b'/dev/sdd'
$
So there was one readahead extent with a single zone corresponding to the
source device of that last device replace operation logged in dmesg/syslog.
Also the ID of that zone's device was 0 which is a special value set in
the source device of a device replace operation when the operation finishes
(constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()),
confirming again that device /dev/sdd was the source of a device replace
operation.
Normally there should be as many zones in the readahead extent as there are
devices, and I wasn't expecting the extent to be in a block group with a
'single' profile, so I went and confirmed with the following drgn script
that there weren't any single profile block groups:
$ cat dump_block_groups.py
import sys
import drgn
from drgn import NULL, Object, cast, container_of, execscript, \
reinterpret, sizeof
from drgn.helpers.linux import *
mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"
mnt = None
for mnt in for_each_mount(prog, dst = mnt_path):
pass
if mnt is None:
sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
sys.exit(1)
fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)
BTRFS_BLOCK_GROUP_DATA = (1 << 0)
BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1)
BTRFS_BLOCK_GROUP_METADATA = (1 << 2)
BTRFS_BLOCK_GROUP_RAID0 = (1 << 3)
BTRFS_BLOCK_GROUP_RAID1 = (1 << 4)
BTRFS_BLOCK_GROUP_DUP = (1 << 5)
BTRFS_BLOCK_GROUP_RAID10 = (1 << 6)
BTRFS_BLOCK_GROUP_RAID5 = (1 << 7)
BTRFS_BLOCK_GROUP_RAID6 = (1 << 8)
BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9)
BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10)
def bg_flags_string(bg):
flags = bg.flags.value_()
ret = ''
if flags & BTRFS_BLOCK_GROUP_DATA:
ret = 'data'
if flags & BTRFS_BLOCK_GROUP_METADATA:
if len(ret) > 0:
ret += '|'
ret += 'meta'
if flags & BTRFS_BLOCK_GROUP_SYSTEM:
if len(ret) > 0:
ret += '|'
ret += 'system'
if flags & BTRFS_BLOCK_GROUP_RAID0:
ret += ' raid0'
elif flags & BTRFS_BLOCK_GROUP_RAID1:
ret += ' raid1'
elif flags & BTRFS_BLOCK_GROUP_DUP:
ret += ' dup'
elif flags & BTRFS_BLOCK_GROUP_RAID10:
ret += ' raid10'
elif flags & BTRFS_BLOCK_GROUP_RAID5:
ret += ' raid5'
elif flags & BTRFS_BLOCK_GROUP_RAID6:
ret += ' raid6'
elif flags & BTRFS_BLOCK_GROUP_RAID1C3:
ret += ' raid1c3'
elif flags & BTRFS_BLOCK_GROUP_RAID1C4:
ret += ' raid1c4'
else:
ret += ' single'
return ret
def dump_bg(bg):
print()
print(f'block group at {hex(bg.value_())}')
print(f'\t start {bg.start.value_()} length {bg.length.value_()}')
print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}')
bg_root = fs_info.block_group_cache_tree.address_of_()
for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'):
dump_bg(bg)
$ drgn dump_block_groups.py
block group at 0xffff8f3d673b0400
start 22020096 length 16777216
flags 258 - system raid6
block group at 0xffff8f3d53ddb400
start 38797312 length 536870912
flags 260 - meta raid6
block group at 0xffff8f3d5f4d9c00
start 575668224 length 2147483648
flags 257 - data raid6
block group at 0xffff8f3d08189000
start 2723151872 length 67108864
flags 258 - system raid6
block group at 0xffff8f3db70ff000
start 2790260736 length 1073741824
flags 260 - meta raid6
block group at 0xffff8f3d5f4dd800
start 3864002560 length 67108864
flags 258 - system raid6
block group at 0xffff8f3d67037000
start 3931111424 length 2147483648
flags 257 - data raid6
$
So there were only 2 reasons left for having a readahead extent with a
single zone: reada_find_zone(), called when creating a readahead extent,
returned NULL either because we failed to find the corresponding block
group or because a memory allocation failed. With some additional and
custom tracing I figured out that on every further ocurrence of the
problem the block group had just been deleted when we were looping to
create the zones for the readahead extent (at reada_find_extent()), so we
ended up with only one zone in the readahead extent, corresponding to a
device that ends up getting replaced.
So after figuring that out it became obvious why the hang happens:
1) Task A starts a scrub on any device of the filesystem, except for
device /dev/sdd;
2) Task B starts a device replace with /dev/sdd as the source device;
3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently
starting to scrub a stripe from block group X. This call to
btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add()
calls reada_add_block(), it passes the logical address of the extent
tree's root node as its 'logical' argument - a value of 38928384;
4) Task A then enters reada_find_extent(), called from reada_add_block().
It finds there isn't any existing readahead extent for the logical
address 38928384, so it proceeds to the path of creating a new one.
It calls btrfs_map_block() to find out which stripes exist for the block
group X. On the first iteration of the for loop that iterates over the
stripes, it finds the stripe for device /dev/sdd, so it creates one
zone for that device and adds it to the readahead extent. Before getting
into the second iteration of the loop, the cleanup kthread deletes block
group X because it was empty. So in the iterations for the remaining
stripes it does not add more zones to the readahead extent, because the
calls to reada_find_zone() returned NULL because they couldn't find
block group X anymore.
As a result the new readahead extent has a single zone, corresponding to
the device /dev/sdd;
4) Before task A returns to btrfs_reada_add() and queues the readahead job
for the readahead work queue, task B finishes the device replace and at
btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new
device /dev/sdg;
5) Task A returns to reada_add_block(), which increments the counter
"->elems" of the reada_control structure allocated at btrfs_reada_add().
Then it returns back to btrfs_reada_add() and calls
reada_start_machine(). This queues a job in the readahead work queue to
run the function reada_start_machine_worker(), which calls
__reada_start_machine().
At __reada_start_machine() we take the device list mutex and for each
device found in the current device list, we call
reada_start_machine_dev() to start the readahead work. However at this
point the device /dev/sdd was already freed and is not in the device
list anymore.
This means the corresponding readahead for the extent at 38928384 is
never started, and therefore the "->elems" counter of the reada_control
structure allocated at btrfs_reada_add() never goes down to 0, causing
the call to btrfs_reada_wait(), done by the scrub task, to wait forever.
Note that the readahead request can be made either after the device replace
started or before it started, however in pratice it is very unlikely that a
device replace is able to start after a readahead request is made and is
able to complete before the readahead request completes - maybe only on a
very small and nearly empty filesystem.
This hang however is not the only problem we can have with readahead and
device removals. When the readahead extent has other zones other than the
one corresponding to the device that is being removed (either by a device
replace or a device remove operation), we risk having a use-after-free on
the device when dropping the last reference of the readahead extent.
For example if we create a readahead extent with two zones, one for the
device /dev/sdd and one for the device /dev/sde:
1) Before the readahead worker starts, the device /dev/sdd is removed,
and the corresponding btrfs_device structure is freed. However the
readahead extent still has the zone pointing to the device structure;
2) When the readahead worker starts, it only finds device /dev/sde in the
current device list of the filesystem;
3) It starts the readahead work, at reada_start_machine_dev(), using the
device /dev/sde;
4) Then when it finishes reading the extent from device /dev/sde, it calls
__readahead_hook() which ends up dropping the last reference on the
readahead extent through the last call to reada_extent_put();
5) At reada_extent_put() it iterates over each zone of the readahead extent
and attempts to delete an element from the device's 'reada_extents'
radix tree, resulting in a use-after-free, as the device pointer of the
zone for /dev/sdd is now stale. We can also access the device after
dropping the last reference of a zone, through reada_zone_release(),
also called by reada_extent_put().
And a device remove suffers the same problem, however since it shrinks the
device size down to zero before removing the device, it is very unlikely to
still have readahead requests not completed by the time we free the device,
the only possibility is if the device has a very little space allocated.
While the hang problem is exclusive to scrub, since it is currently the
only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free
problem affects any path that triggers readhead, which includes
btree_readahead_hook() and __readahead_hook() (a readahead worker can
trigger readahed for the children of a node) for example - any path that
ends up calling reada_add_block() can trigger the use-after-free after a
device is removed.
So fix this by waiting for any readahead requests for a device to complete
before removing a device, ensuring that while waiting for existing ones no
new ones can be made.
This problem has been around for a very long time - the readahead code was
added in 2011, device remove exists since 2008 and device replace was
introduced in 2013, hard to pick a specific commit for a git Fixes tag.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch fixes the following sparse errors in
fs/btrfs/super.c in function btrfs_show_devname()
fs/btrfs/super.c: error: incompatible types in comparison expression (different address spaces):
fs/btrfs/super.c: struct rcu_string [noderef] <asn:4> *
fs/btrfs/super.c: struct rcu_string *
The error was because of the following line in function btrfs_show_devname():
if (first_dev)
seq_escape(m, rcu_str_deref(first_dev->name), " \t\n\\");
Annotating the btrfs_device::name member with __rcu fixes the sparse
error.
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While this patch touches a bunch of files the conversion is
straighforward. Instead of using the implicit linked list anchored at
btrfs_fs_devices::seed the code is switched to using
list_for_each_entry.
Previous patches in the series already factored out code that processed
both main and seed devices so in those cases the factored out functions
are called on the main fs_devices and then on every seed dev inside
list_for_each_entry.
Using list api also allows to simplify deletion from the seed dev list
performed in btrfs_rm_device and btrfs_rm_dev_replace_free_srcdev by
substituting a while() loop with a simple list_del_init.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It makes no sense to have sysfs-related routines be responsible for
properly initialising the fs_info pointer of struct btrfs_fs_device.
Instead this can be streamlined by making it the responsibility of
btrfs_init_devices_late to initialize it. That function already
initializes fs_info of every individual device in btrfs_fs_devices.
As far as clearing it is concerned it makes sense to move it to
close_fs_devices. That function is only called when struct
btrfs_fs_devices is no longer in use - either for holding seeds or
main devices for a mounted filesystem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return value of this function conveys absolutely no information.
All callers already check the state of fs_devices->opened to decide how
to proceed. So convert the function to returning void. While at it make
btrfs_close_devices also return void.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to move the closing of the src_device out of all the device
replace locking, but we definitely want to zero out the superblock
before we commit the last time to make sure the device is properly
removed. Handle this by pushing btrfs_scratch_superblocks into
btrfs_dev_replace_finishing, and then later on we'll move the src_device
closing and freeing stuff where we need it to be.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of recording stripe_index and using that to access correct
btrfs_device from btrfs_bio::stripes record the btrfs_device in
btrfs_io_bio. This will enable endio handlers to increment device
error counters on checksum errors.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Convert fall through comments to the pseudo-keyword which is now the
preferred way.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce chunk allocation policy for btrfs. This policy controls how
chunks and device extents are allocated from devices.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's used only during filesystem mount as such it can be made private to
disk-io.c file. Also use the occasion to move btrfs_uuid_rescan_kthread
as btrfs_check_uuid_tree is its sole caller.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Super-block reading in BTRFS is done using buffer_heads. Buffer_heads
have some drawbacks, like not being able to propagate errors from the
lower layers.
Directly use the page cache for reading the super blocks from disk or
invalidating an on-disk super block. We have to use the page cache so to
avoid races between mkfs and udev. See also 6f60cbd3ae ("btrfs: access
superblock via pagecache in scan_one_device").
This patch unwraps the buffer head API and does not change the way the
super block is actually read.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_scratch_superblocks() isn't used anywhere outside volumes.c so
remove it from the header file and mark it as static. Also move it
above it's callers so we don't need a forward declaration.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory patch for removal of buffer_head usage in btrfs.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl5JQQUACgkQxWXV+ddt
WDv+fRAAh2VeACdVgGPCqH3kBphdBzqT2x9EUWZK++AWTr0Upg4Mz1mvD2h1WX6L
Yd/cuG0hIy2AFl1fEwrOp9d64PGFRnVcs0IS0C9GC/kH9ZzrSuz3pcfni3uxCr0N
t+/Pghxb654fLPd8eho9Pnc9bi/EPPRZ+mmwup4A9MyC7Bdfzf821ykrhqwam54V
LWRUanVfeJOuxNbgF2Hjnr9ZI2fALsFfh5+q1VCeNsm76Le67RGVi7V6i9Gxj8eE
3zOH/XM1Jzft3cLinfimIUC0BQKBuFXSKnYun5zP47Y5VHgxYCcfBBAD71uGgs52
mxaz1vLGE6GZo631zBBXvM6BalEHyQROP8Daman9NiJDctkvICXzv/bwi4k5ZHSF
i45MANAtBb10S/AYitscqmGR7sYHZtKBkgJHjH+0YqKgcu3OWInqNVuW77kZEguV
/UjcdjAmxirvyAaxOdfXtBfuZKBU1kL+dZwg4OeqzbDoBsUAtkEG+3oIcjkGnP9e
6QuQx5XYKmI1tugcAz0uj5ryXW6UtIFVy+Fgxht+XMSNRR5CiUpu7Ndm/ZrKx5RS
/hv2KZot+/p7IA9J0YvZbYwwvw28YxR4PgGMOKYhqKnTVHR6eaFTDNKiaQRkJaXr
Nimk6TQrpc9Qu/rcoeyuQajxCRhwSqNAJH97MJPMDz39xolEys8=
=i1Ct
-----END PGP SIGNATURE-----
Merge tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two races fixed, memory leak fix, sysfs directory fixup and two new
log messages:
- two fixed race conditions: extent map merging and truncate vs
fiemap
- create the right sysfs directory with device information and move
the individual device dirs under it
- print messages when the tree-log is replayed at mount time or
cannot be replayed on remount"
* tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs, move device id directories to UUID/devinfo
btrfs: sysfs, add UUID/devinfo kobject
Btrfs: fix race between shrinking truncate and fiemap
btrfs: log message when rw remount is attempted with unclean tree-log
btrfs: print message when tree-log replay starts
Btrfs: fix race between using extent maps and merging them
btrfs: ref-verify: fix memory leaks
Create directory /sys/fs/btrfs/UUID/devinfo to hold devices directories
by the id (unlike /devices).
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=4OkE
-----END PGP SIGNATURE-----
Merge tag 'for-5.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features, highlights:
- async discard
- "mount -o discard=async" to enable it
- freed extents are not discarded immediatelly, but grouped
together and trimmed later, with IO rate limiting
- the "sync" mode submits short extents that could have been
ignored completely by the device, for SATA prior to 3.1 the
requests are unqueued and have a big impact on performance
- the actual discard IO requests have been moved out of
transaction commit to a worker thread, improving commit latency
- IO rate and request size can be tuned by sysfs files, for now
enabled only with CONFIG_BTRFS_DEBUG as we might need to
add/delete the files and don't have a stable-ish ABI for
general use, defaults are conservative
- export device state info in sysfs, eg. missing, writeable
- no discard of extents known to be untouched on disk (eg. after
reservation)
- device stats reset is logged with process name and PID that called
the ioctl
Fixes:
- fix missing hole after hole punching and fsync when using NO_HOLES
- writeback: range cyclic mode could miss some dirty pages and lead
to OOM
- two more corner cases for metadata_uuid change after power loss
during the change
- fix infinite loop during fsync after mix of rename operations
Core changes:
- qgroup assign returns ENOTCONN when quotas not enabled, used to
return EINVAL that was confusing
- device closing does not need to allocate memory anymore
- snapshot aware code got removed, disabled for years due to
performance problems, reimplmentation will allow to select wheter
defrag breaks or does not break COW on shared extents
- tree-checker:
- check leaf chunk item size, cross check against number of
stripes
- verify location keys for DIR_ITEM, DIR_INDEX and XATTR items
- new self test for physical -> logical mapping code, used for super
block range exclusion
- assertion helpers/macros updated to avoid objtool "unreachable
code" reports on older compilers or config option combinations"
* tag 'for-5.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (84 commits)
btrfs: free block groups after free'ing fs trees
btrfs: Fix split-brain handling when changing FSID to metadata uuid
btrfs: Handle another split brain scenario with metadata uuid feature
btrfs: Factor out metadata_uuid code from find_fsid.
btrfs: Call find_fsid from find_fsid_inprogress
Btrfs: fix infinite loop during fsync after rename operations
btrfs: set trans->drity in btrfs_commit_transaction
btrfs: drop log root for dropped roots
btrfs: sysfs, add devid/dev_state kobject and device attributes
btrfs: Refactor btrfs_rmap_block to improve readability
btrfs: Add self-tests for btrfs_rmap_block
btrfs: selftests: Add support for dummy devices
btrfs: Move and unexport btrfs_rmap_block
btrfs: separate definition of assertion failure handlers
btrfs: device stats, log when stats are zeroed
btrfs: fix improper setting of scanned for range cyclic write cache pages
btrfs: safely advance counter when looking up bio csums
btrfs: remove unused member btrfs_device::work
btrfs: remove unnecessary wrapper get_alloc_profile
btrfs: add correction to handle -1 edge case in async discard
...
New sysfs attributes that track the filesystem status of devices, stored
in the per-filesystem directory in /sys/fs/btrfs/FSID/devinfo . There's
a directory for each device, with name corresponding to the numerical
device id.
in_fs_metadata - device is in the list of fs metadata
missing - device is missing (no device node or block device)
replace_target - device is target of replace
writeable - writes from fs are allowed
These attributes reflect the state of the device::dev_state and created
at mount time.
Sample output:
$ pwd
/sys/fs/btrfs/6e1961f1-5918-4ecc-a22f-948897b409f7/devinfo/1/
$ ls
in_fs_metadata missing replace_target writeable
$ cat missing
0
The output from these attributes are 0 or 1. 0 indicates unset and 1
indicates set. These attributes are readonly.
It is observed that the device delete thread and sysfs read thread will
not race because the delete thread calls sysfs kobject_put() which in
turn waits for existing sysfs read to complete.
Note for device replace devid swap:
During the replace the target device temporarily assumes devid 0 before
assigning the devid of the soruce device.
In btrfs_dev_replace_finishing() we remove source sysfs devid using the
function btrfs_sysfs_remove_devices_attr(), so after that call
kobject_rename() to update the devid in the sysfs. This adds and calls
btrfs_sysfs_update_devid() helper function to update the device id.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's used only during initial block group reading to map physical
address of super block to a list of logical ones. Make it private to
block-group.c, add proper kernel doc and ensure it's exported only for
tests.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a leftover from recently removed bio scheduling framework.
Fixes: ba8a9d0795 ("Btrfs: delete the entire async bio submission framework")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The struct member btrfs_device::device_dir_kobj holds the kobj of the
sysfs directory /sys/fs/btrfs/UUID/devices, so rename it from
device_dir_kobj to devices_kobj. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the btrfs_device_set_…() macro over to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-btrfs@vger.kernel.org
Link: https://lore.kernel.org/r/20191015191821.11479-25-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
struct btrfs_fs_devices::rotating currently is declared as an integer
variable but only used as a boolean.
Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_fs_devices::seeding currently is declared as an integer
variable but only used as a boolean.
Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 4 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the 2-
and 3-copy RAID1.
The minimum number of devices is 4, the maximum number of devices/chunks
that can be lost/damaged is 3. There is no comparable traditional RAID
level, the profile is added for future needs to accompany triple-parity
and beyond.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 3 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the
2-copy RAID1.
The minimum number of devices is 3, the maximum number of devices/chunks
that can be lost/damaged is 2. Like RAID6 but with 33% space
utilization.
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of btrfs_bio::flags was removed in commit 326e1dbb57
("block: remove management of bi_remaining when restoring original
bi_end_io"), remove it.
(Tagged for stable as the structure is heavily used and space savings
are desirable.)
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not using btrfs_schedule_bio() anymore, delete all the
code that supported it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_schedule_bio() hands IO off to a helper thread to do the actual
submit_bio() call. This has been used to make sure async crc and
compression helpers don't get stuck on IO submission. To maintain good
performance, over time the IO submission threads duplicated some IO
scheduler characteristics such as high and low priority IOs and they
also made some ugly assumptions about request allocation batch sizes.
All of this cost at least one extra context switch during IO submission,
and doesn't fit well with the modern blkmq IO stack. So, this commit stops
using btrfs_schedule_bio(). We may need to adjust the number of async
helper threads for crcs and compression, but long term it's a better
path.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For some reason the attribute is called __attribute_const__ and not
__const, marks functions that have no observable effects on program
state, IOW not reading pointers, just the arguments and calculating a
value. Allows the compiler to do some optimizations, based on
-Wsuggest-attribute=const . The effects are rather small, though, about
60 bytes decrese of btrfs.ko.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_dev_stat_reset() is an overdo in terms of wrapping. So this patch
open codes btrfs_dev_stat_reset().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The status of flush bio is tracked as a status bit, changed in commit
1c3063b6db ("btrfs: cleanup device states define
BTRFS_DEV_STATE_FLUSH_SENT"), the flush_bio_sent was forgotten.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is only used locally in find_free_dev_extent(), no
external callers.
So unexport it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Presently btrfs_map_block is used not only to do everything necessary to
map a bio to the underlying allocation profile but it's also used to
identify how much data could be written based on btrfs' stripe logic
without actually submitting anything. This is achieved by passing NULL
for 'bbio_ret' parameter.
This patch refactors all callers that require just the mapping length
by switching them to using btrfs_io_geometry instead of calling
btrfs_map_block with a special NULL value for 'bbio_ret'. No functional
change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a structure that holds various parameters for IO calculations and a
helper that fills the values. This will help further refactoring and
reduction of functions that in some way open-coded the calculations.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper lacks the btrfs_ prefix and the parameter is the raw
blockgroup type, so none of the callers has to do the flags -> index
conversion.
Signed-off-by: David Sterba <dsterba@suse.com>
The raid_attr table is now 7 * 56 = 392 bytes long, consisting of just
small numbers so we don't have to use ints. New size is 7 * 32 = 224,
saving 3 cachelines.
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo