If CONFIG_OF is disabled then the matching table is notreferenced.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The variable next_addr is not initialized and is being used in a call
to i3c_master_get_free_addr as a starting point to find the next address.
Fix this by initializing next_addr to 0 to avoid an uninitialized garbage
starting address from being used.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20201124123504.396249-1-colin.king@canonical.com
This adds basic support for hardware implementing the MIPI I3C HCI
specification. This driver is currently limited by the capabilities
of the I3C subsystem, meaning things like scheduled commands,
auto-commands and NCM mode are not yet supported.
This supports version 1.0 of the MIPI I3C HCI spec, as well as the
imminent release of version 1.1. Support for draft version 2.0 of the
spec is also largely included with the caveat that future adjustments
to this code are likely as the spec is still a work in progress.
This is also lightly tested as actual hardware is still very scarce,
even for HCI v1.0. Hence the EXPERIMENTAL tag. Further contributions
to this driver are expected once vendor implementations and new I3C
devices become available.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20201111220510.3622216-3-nico@fluxnic.net
* Fix an error path in the cadence driver
-----BEGIN PGP SIGNATURE-----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=yC+2
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
- Fix DAA for the pre-reserved address case
- Fix an error path in the cadence driver
* tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Fix error return in cdns_i3c_master_probe()
i3c: master: fix for SETDASA and DAA process
i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
This patch fix following issue.
Controller slots blocked for devices with static_addr
but no init_dyn_addr may limit the number of I3C devices
on the bus which gets dynamic address in DAA. So
instead of attaching all the devices with static_addr,
now we only attach the devices which successfully
complete SETDASA. For remaining devices with init_dyn_addr,
i3c_master_add_i3c_dev_locked() will try to set requested
dynamic address after DAA.
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/1598337109-14770-1-git-send-email-pthombar@cadence.com
Boardinfo was lost if I3C object for devices with boardinfo
available are not created or not added to the I3C device list
because of some failure e.g. SETDASA failed, retrieve info failed etc
This patch adds i3c_master_attach_boardinfo which scan boardinfo list
in the master object and 'attach' it to the I3C device object.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/1590053542-389-1-git-send-email-pthombar@cadence.com
According to the I3C spec v1.1 document, GETMRL's payload is 2 bytes,
with an optional 3rd byte if the IBI private payload is larger than
1 byte. The whole GETMRL may also be optional so max_ibi_len already
defaults to 1 if BCR_IBI_PAYLOAD prior to the i3c_master_getmrl_locked()
call.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/nycvar.YSQ.7.76.2004151623060.2671@knanqh.ubzr
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20200227131307.GA24935@embeddedor
We already have the master device in a variable, reuse it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Vitor Soares <vitor.soares@synopsys.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20200214145853.24762-1-wsa+renesas@sang-engineering.com
For today the reattach function only update the device address on the
controller.
Update the location to the first available too, will optimize the
enumeration process avoiding additional checks to keep the available
positions on address table consecutive.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
i3c_bus_set_mode function is only used in master.c.
Make it static to avoid warning when compiling with W=1.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patch adds support for THD_DEL (Data Hold Delay) to Cadence
I3C master constoller driver.
As per MIPI I3C Specification 1.0, Table 75 (page 142) defines
non-zero minimal tHD_PP timing on master output (Fig 65). This
setting allows to meet this timing on master's soc outputs,
regardless of PCB balancing.
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Since we have i3c_dev_get_master() available, use it.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Since we have dev_to_i3cmaster() available, use it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
In i3c_master_getmwl_locked(), the buffer used for the dest payload data is
allocated using kzalloc() in i3c_ccc_cmd_dest_init(). Later on, the length
of the dest payload data is checked against 'sizeof(*mwl)'. If they are not
equal, -EIO is returned to indicate the error. However, the allocated
buffer is not deallocated on this path, leading to a memory leak.
To fix the above issue, free the buffer before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
I need to store address and lvr value for I2C devices without static definition
in DT. This allows secondary master to transmit DEFSLVS command properly.
Main changes between v4 and v5:
- Change in defslvs to use addr and lvr from i2c_dev_desc structure
- Change in CDNS and DW drivers to use addr and lvr from i2c_dev_desc structure
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This simplifies and standardizes slot manipulation code
by using for_each_set_bit() library function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Each iteration of for_each_available_childe_of_node puts the previous
node, but in the case of a return from the middle of the loop, there
is no put, thus causing a memory leak. Add an of_node_put before the
return.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Some I3C device drivers need to know which entry matches the
i3c_device object passed to the probe function
Let's move i3c_device_match_id() to device.c and export it so it can be
used by drivers.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
* Add support for limited bus mode
* Fix the Cadence DT binding doc
* Use struct_size() to allocate a DEFSLVS packet
-----BEGIN PGP SIGNATURE-----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=Uj8o
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull ic3 updates from Boris Brezillon:
- Drop support for 10-bit I2C addresses
- Add support for limited bus mode
- Fix the Cadence DT binding doc
- Use struct_size() to allocate a DEFSLVS packet
* tag 'i3c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Use struct_size() helper
dt-bindings: i3c: cdns: Use correct cells for I2C device
i3c: dw: add limited bus mode support
i3c: add mixed limited bus mode
i3c: fix i2c and i3c scl rate by bus mode
dt-bindings: i3c: Document dropped support for I2C 10 bit devices
i3c: Drop support for I2C 10 bit addresing
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace the following form:
sizeof(*defslvs) + ((ndevs - 1) * sizeof(struct i3c_ccc_dev_desc))
with:
struct_size(defslvs, slaves, ndevs - 1)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patch add limited bus mode support for DesignWare i3c master
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The i3c bus spec defines a bus configuration where i2c devices don't
have a 50ns filter but support SCL running at SDR max rate (12.5MHz).
This patch introduces the limited bus mode so that users can use
a higher speed in presence of i2c devices index 1.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Currently the I3C framework limits SCL frequency to FM speed when
dealing with a mixed slow bus, even if all I2C devices are FM+ capable.
The core was also not accounting for I3C speed limitations when
operating in mixed slow mode and was erroneously using FM+ speed as the
max I2C speed when operating in mixed fast mode.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patch drops support for I2C devices with 10 bit addressing. When I2C
device with 10 bit address is defined in DT, I3C master registration fails.
Address space for I2C devices has been reduced and ->i2c_funcs() hook has been
removed.
Because this patch series dropped support for 10 bit I2C devices, support is
also dropped in Cadence I3C master driver and Synopsys DesignWare I3C master
driver.
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Remove dead code in the DW driver
-----BEGIN PGP SIGNATURE-----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=/U9S
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c update from Boris Brezillon:
- Fix a shift wrap bug in the core
- Remove dead code in the DW driver
* tag 'i3c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Fix a shift wrap bug in i3c_bus_set_addr_slot_status()
i3c: master: dw: remove dead code from dw_i3c_master_*_xfers()
The problem here is that addr can be I3C_BROADCAST_ADDR (126). That
means we're shifting by (126 * 2) % 64 which is 60. The
I3C_ADDR_SLOT_STATUS_MASK is an enum which is an unsigned int in GCC
so shifts greater than 31 are undefined.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The controller was being disabled incorrectly. The correct way is to clear
the DEV_CTRL_ENABLE bit.
Fix this by clearing this bit.
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The validation of random PID should be done by checking the
boardinfo->pid instead of info.pid which is empty.
Doing the change the info struture declaration is no longer necessary.
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org>
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Detected by CoverityScan (Event result_independent_of_operands):
"(i3c_xfers + i).len > 65536" is always false regardless of the values
of its operands. This occurs as the logical operand of "if"
"(i2c_xfers + i).len > 65536" is always false regardless of the values
of its operands. This occurs as the logical operand of "if"
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
- Update the I3C entries in MAINTAINERS to add an IRC chan
-----BEGIN PGP SIGNATURE-----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=Ijxi
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
- Add a /* fall-through */ comment in the dw-i3c-master driver
- Update the I3C entries in MAINTAINERS to add an IRC chan
* tag 'i3c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw-i3c-master: mark expected switch fall-through
MAINTAINERS: Add an IRC channel for the I3C subsystem
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/i3c/master/dw-i3c-master.c: In function ‘dw_i3c_master_bus_init’:
drivers/i3c/master/dw-i3c-master.c:603:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (ret)
^
drivers/i3c/master/dw-i3c-master.c:605:2: note: here
case I3C_BUS_MODE_PURE:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
In dw_i3c_master_irq_handler(), we already have gotten
&master->xferqueue.lock, if we try to get the same lock again in
dw_i3c_master_dequeue_xfer(), deadlock happens.
We fix this issue by introduing dw_i3c_master_dequeue_xfer_locked()
which does all what dw_i3c_master_dequeue_xfer() does without trying
to lock &master->xferqueue.lock.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
If we failed to retrieve the i3c dev, we should detach the i3c dev
I.E i3c_master_detach_i3c_dev().
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
This patch fix i3c_attach/reattach functions.
During the i3c_attach the driver ignores the static address used for
SETDASA CCC command.
During the i3c_reattach the driver doesn't update master->addrs[data->index]
with new address if old_dyn_addr = 0.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
This patch fixes I2C transfers in Cadence I3C master driver.
There was no way to queue more than one I2C transfer before.
Fixes: 603f2bee2c ("i3c: master: Add driver for Cadence IP")
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
This should be >= ARRAY_SIZE() to avoid reading one element beyond the
end of the array.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
We should return "ret" as-is. The "newdev" variable is a valid pointer.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Nicolas Pitre