Intel SDM considers these checks to be part of
"Checks on Guest Non-Register State".
Note that it is legal for vmcs->vmcs_link_pointer to be -1ull
when VMCS shadowing is enabled. In this case, any VMREAD/VMWRITE to
shadowed-field sets the ALU flags for VMfailInvalid (i.e. CF=1).
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functionality change.
This is done as a preparation for VMCS shadowing emulation.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functionality change.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For nested virtualization L0 KVM is managing a bit of state for L2 guests,
this state can not be captured through the currently available IOCTLs. In
fact the state captured through all of these IOCTLs is usually a mix of L1
and L2 state. It is also dependent on whether the L2 guest was running at
the moment when the process was interrupted to save its state.
With this capability, there are two new vcpu ioctls: KVM_GET_NESTED_STATE
and KVM_SET_NESTED_STATE. These can be used for saving and restoring a VM
that is in VMX operation.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
[karahmed@ - rename structs and functions and make them ready for AMD and
address previous comments.
- handle nested.smm state.
- rebase & a bit of refactoring.
- Merge 7/8 and 8/8 into one patch. ]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the vCPU enters system management mode while running a nested guest,
RSM starts processing the vmentry while still in SMM. In that case,
however, the pages pointed to by the vmcs12 might be incorrectly
loaded from SMRAM. To avoid this, delay the handling of the pages
until just before the next vmentry. This is done with a new request
and a new entry in kvm_x86_ops, which we will be able to reuse for
nested VMX state migration.
Extracted from a patch by Jim Mattson and KarimAllah Ahmed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test calls KVM_RUN repeatedly, and creates an entirely new VM with the
old memory and vCPU state on every exit to userspace. The kvm_util API is
expanded with two functions that manage the lifetime of a kvm_vm struct:
the first closes the file descriptors and leaves the memory allocated,
and the second opens the file descriptors and reuses the memory from
the previous incarnation of the kvm_vm struct.
For now the test is very basic, as it does not test for example XSAVE or
vCPU events. However, it will test nested virtualization state starting
with the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The selftests were not munmap-ing the kvm_run area from the vcpu file descriptor.
The result was that kvm_vcpu_release was not called and a reference was left in the
parent "struct kvm". Ultimately this was visible in the upcoming state save/restore
test as an error when KVM attempted to create a duplicate debugfs entry.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The allocation of the VMXON and VMCS is currently done twice, in
lib/vmx.c and in vmx_tsc_adjust_test.c. Reorganize the code to
provide a cleaner and easier to use API to the tests. lib/vmx.c
now does the complete setup of the VMX data structures, but does not
create the VM or set CPUID. This has to be done by the caller.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GDT and the TSS base were left to zero, and this has interesting effects
when the TSS descriptor is later read to set up a VMCS's TR_BASE. Basically
it worked by chance, and this patch fixes it by setting up all the protected
mode data structures properly.
Because the GDT and TSS addresses are virtual, the page tables now always
exist at the time of vcpu setup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the MSRs returned by GET_MSR_INDEX_LIST currently cannot be sent back
to KVM_GET_MSR and/or KVM_SET_MSR; either they can never be sent back, or you
they are only accepted under special conditions. This makes the API a pain to
use.
To avoid this pain, this patch makes it so that the result of the get-list
ioctl can always be used for host-initiated get and set. Since we don't have
a separate way to check for read-only MSRs, this means some Hyper-V MSRs are
ignored when written. Arguably they should not even be in the result of
GET_MSR_INDEX_LIST, but I am leaving there in case userspace is using the
outcome of GET_MSR_INDEX_LIST to derive the support for the corresponding
Hyper-V feature.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux does not support Memory Protection Extensions (MPX) in the
kernel itself, thus the BNDCFGS (Bound Config Supervisor) MSR will
always be zero in the KVM host, i.e. RDMSR in vmx_save_host_state()
is superfluous. KVM unconditionally sets VM_EXIT_CLEAR_BNDCFGS,
i.e. BNDCFGS will always be zero after VMEXIT, thus manually loading
BNDCFGS is also superfluous.
And in the event the MPX kernel support is added (unlikely given
that MPX for userspace is in its death throes[1]), BNDCFGS will
likely be common across all CPUs[2], and at the least shouldn't
change on a regular basis, i.e. saving the MSR on every VMENTRY is
completely unnecessary.
WARN_ONCE in hardware_setup() if the host's BNDCFGS is non-zero to
document that KVM does not preserve BNDCFGS and to serve as a hint
as to how BNDCFGS likely should be handled if MPX is used in the
kernel, e.g. BNDCFGS should be saved once during KVM setup.
[1] https://lkml.org/lkml/2018/4/27/1046
[2] http://www.openwall.com/lists/kernel-hardening/2017/07/24/28
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch 'requests' to be explicitly 64-bit and update BUILD_BUG_ON check to
use the size of "requests" instead of the hard-coded '32'.
That gives us a bit more room again for arch-specific requests as we
already ran out of space for x86 due to the hard-coded check.
The only exception here is ARM32 as it is still 32-bits.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM is supposed to update some guest VM's CPUID bits (e.g. OSXSAVE) when
CR4 is changed. A bug was found in KVM recently and it was fixed by
Commit c4d2188206 ("KVM: x86: Update cpuid properly when CR4.OSXAVE or
CR4.PKE is changed"). This patch adds a test to verify the synchronization
between guest VM's CR4 and CPUID bits.
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into HEAD
Pull bug fixes into the KVM development tree to avoid nasty conflicts.
- initial version for host large page support. Must be enabled with
module parameter hpage=1 and will conflict with the nested=1
parameter.
- enable etoken facility for guests
- Fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=WSH5
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features for 4.19
- initial version for host large page support. Must be enabled with
module parameter hpage=1 and will conflict with the nested=1
parameter.
- enable etoken facility for guests
- Fixes
This update adds no new features; it just has some minor code cleanups
and bug fixes, including a fix to allow us to create KVM_MAX_VCPUS
vCPUs on POWER9 in all CPU threading modes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbX/AJAAoJEJ2a6ncsY3GfO7sH/jEq1yuCzIjegVFkO7qPFd0C
LXwcXyFfM7EIB7kWfHLPzfavBaQZvILUR5N2J2nEjEkyeHzouZ3utwU0zUeVLmDm
3zqb/OT1viNxpKV88qkYCIsW1aB1j9dIP714BTqXYF49z09tv/LXE5ErqWBLJoVi
eK1o1CoivfudONTyz4SQlMbGrdA0UgR9hxQviIhPnQmgOJfJCWpQR5wTkQh7kxDn
htBi2Qe0gpRL+9VMMGQbCVpHRw/VTolOfS+MDxfmrGlHh6ML9GjoOMBO5uraTeDg
1he8PZS1In5KR62qrOhzfraJ49oscSn+dhxrQfYx2crCmxPygJsWkVIJrmGFiFU=
=P447
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 4.19.
This update adds no new features; it just has some minor code cleanups
and bug fixes, including a fix to allow us to create KVM_MAX_VCPUS
vCPUs on POWER9 in all CPU threading modes.
- must be enabled via module parameter hpage=1
- cannot be used together with nested
- does support migration
- does support hugetlbfs
- no THP yet
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Y0Wl
-----END PGP SIGNATURE-----
Merge tag 'hlp_stage1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvms390/next
KVM: s390: initial host large page support
- must be enabled via module parameter hpage=1
- cannot be used together with nested
- does support migration
- does support hugetlbfs
- no THP yet
General KVM huge page support on s390 has to be enabled via the
kvm.hpage module parameter. Either nested or hpage can be enabled, as
we currently do not support vSIE for huge backed guests. Once the vSIE
support is added we will either drop the parameter or enable it as
default.
For a guest the feature has to be enabled through the new
KVM_CAP_S390_HPAGE_1M capability and the hpage module
parameter. Enabling it means that cmm can't be enabled for the vm and
disables pfmf and storage key interpretation.
This is due to the fact that in some cases, in upcoming patches, we
have to split huge pages in the guest mapping to be able to set more
granular memory protection on 4k pages. These split pages have fake
page tables that are not visible to the Linux memory management which
subsequently will not manage its PGSTEs, while the SIE will. Disabling
these features lets us manage PGSTE data in a consistent matter and
solve that problem.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Let's allow huge pmd linking when enabled through the
KVM_CAP_S390_HPAGE_1M capability. Also we can now restrict gmap
invalidation and notification to the cases where the capability has
been activated and save some cycles when that's not the case.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Guests backed by huge pages could theoretically free unused pages via
the diagnose 10 instruction. We currently don't allow that, so we
don't have to refault it once it's needed again.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Let's introduce an explicit check if skeys have already been enabled
for the vcpu, so we don't have to check the mm context if we don't have
the storage key facility.
This lets us check for enablement without having to take the mm
semaphore and thus speedup skey emulation.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When doing skey emulation for huge guests, we now need to fault in
pmds, as we don't have PGSTES anymore to store them when we do not
have valid table entries.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Storage keys for guests with huge page mappings have to be managed in
hardware. There are no PGSTEs for PMDs that we could use to retain the
guests's logical view of the key.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Similarly to the pte skey handling, where we set the storage key to
the default key for each newly mapped pte, we have to also do that for
huge pmds.
With the PG_arch_1 flag we keep track if the area has already been
cleared of its skeys.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When a guest starts using storage keys, we trap and set a default one
for its whole valid address space. With this patch we are now able to
do that for large pages.
To speed up the storage key insertion, we use
__storage_key_init_range, which in-turn will use sske_frame to set
multiple storage keys with one instruction. As it has been previously
used for debuging we have to get rid of the default key check and make
it quiescing.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
[replaced page_set_storage_key loop with __storage_key_init_range]
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
To do dirty loging with huge pages, we protect huge pmds in the
gmap. When they are written to, we unprotect them and mark them dirty.
We introduce the function gmap_test_and_clear_dirty_pmd which handles
dirty sync for huge pages.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
If the host invalidates a pmd, we also have to invalidate the
corresponding gmap pmds, as well as flush them from the TLB. This is
necessary, as we don't share the pmd tables between host and guest as
we do with ptes.
The clearing part of these three new functions sets a guest pmd entry
to _SEGMENT_ENTRY_EMPTY, so the guest will fault on it and we will
re-link it.
Flushing the gmap is not necessary in the host's lazy local and csp
cases. Both purge the TLB completely.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Like for ptes, we also need invalidation notification for pmds, to
make sure the guest lowcore pages are always accessible and later
addition of shadowed pmds.
With PMDs we do not have PGSTEs or some other bits we could use in the
host PMD. Instead we pick one of the free bits in the gmap PMD. Every
time a host pmd will be invalidated, we will check if the respective
gmap PMD has the bit set and in that case fire up the notifier.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Let's allow pmds to be linked into gmap for the upcoming s390 KVM huge
page support.
Before this patch we copied the full userspace pmd entry. This is not
correct, as it contains SW defined bits that might be interpreted
differently in the GMAP context. Now we only copy over all hardware
relevant information leaving out the software bits.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Currently we use the software PGSTE bits PGSTE_IN_BIT and
PGSTE_VSIE_BIT to notify before an invalidation occurs on a prefix
page or a VSIE page respectively. Both bits are pgste specific, but
are used when protecting a memory range.
Let's introduce abstract GMAP_NOTIFY_* bits that will be realized into
the respective bits when gmap DAT table entries are protected.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
This patch reworks the gmap_protect_range logic and extracts the pte
handling into an own function. Also we do now walk to the pmd and make
it accessible in the function for later use. This way we can add huge
page handling logic more easily.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Commit 1e175d2 ("KVM: PPC: Book3S HV: Pack VCORE IDs to access full
VCPU ID space", 2018-07-25) added code that uses kvm->arch.emul_smt_mode
before any VCPUs are created. However, userspace can change
kvm->arch.emul_smt_mode at any time up until the first VCPU is created.
Hence it is (theoretically) possible for the check in
kvmppc_core_vcpu_create_hv() to race with another userspace thread
changing kvm->arch.emul_smt_mode.
This fixes it by moving the test that uses kvm->arch.emul_smt_mode into
the block where kvm->lock is held.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Commit 1e175d2 ("KVM: PPC: Book3S HV: Pack VCORE IDs to access full
VCPU ID space", 2018-07-25) allowed use of VCPU IDs up to
KVM_MAX_VCPU_ID on POWER9 in all guest SMT modes and guest emulated
hardware SMT modes. However, with the current definition of
KVM_MAX_VCPU_ID, a guest SMT mode of 1 and an emulated SMT mode of 8,
it is only possible to create KVM_MAX_VCPUS / 2 VCPUS, because
threads_per_subcore is 4 on POWER9 CPUs. (Using an emulated SMT mode
of 8 is useful when migrating VMs to or from POWER8 hosts.)
This increases KVM_MAX_VCPU_ID to 8 * KVM_MAX_VCPUS when HV KVM is
configured in, so that a full complement of KVM_MAX_VCPUS VCPUs can
be created on POWER9 in all guest SMT modes and emulated hardware
SMT modes.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
It is not currently possible to create the full number of possible
VCPUs (KVM_MAX_VCPUS) on Power9 with KVM-HV when the guest uses fewer
threads per core than its core stride (or "VSMT mode"). This is
because the VCORE ID and XIVE offsets grow beyond KVM_MAX_VCPUS
even though the VCPU ID is less than KVM_MAX_VCPU_ID.
To address this, "pack" the VCORE ID and XIVE offsets by using
knowledge of the way the VCPU IDs will be used when there are fewer
guest threads per core than the core stride. The primary thread of
each core will always be used first. Then, if the guest uses more than
one thread per core, these secondary threads will sequentially follow
the primary in each core.
So, the only way an ID above KVM_MAX_VCPUS can be seen, is if the
VCPUs are being spaced apart, so at least half of each core is empty,
and IDs between KVM_MAX_VCPUS and (KVM_MAX_VCPUS * 2) can be mapped
into the second half of each core (4..7, in an 8-thread core).
Similarly, if IDs above KVM_MAX_VCPUS * 2 are seen, at least 3/4 of
each core is being left empty, and we can map down into the second and
third quarters of each core (2, 3 and 5, 6 in an 8-thread core).
Lastly, if IDs above KVM_MAX_VCPUS * 4 are seen, only the primary
threads are being used and 7/8 of the core is empty, allowing use of
the 1, 5, 3 and 7 thread slots.
(Strides less than 8 are handled similarly.)
This allows the VCORE ID or offset to be calculated quickly from the
VCPU ID or XIVE server numbers, without access to the VCPU structure.
[paulus@ozlabs.org - tidied up comment a little, changed some WARN_ONCE
to pr_devel, wrapped line, fixed id check.]
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
- fix a regression in 4.18 that causes a memory leak on probe failure
(Keith Bush)
- fix a deadlock in the passthrough ioctl code (Scott Bauer)
- don't enable AENs if not supported (Weiping Zhang)
- fix an old regression in metadata handling in the passthrough ioctl
code (Roland Dreier)
-----BEGIN PGP SIGNATURE-----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=PvXH
-----END PGP SIGNATURE-----
Merge tag 'nvme-for-4.18' of git://git.infradead.org/nvme
Pull NVMe fixes from Christoph Hellwig:
- fix a regression in 4.18 that causes a memory leak on probe failure
(Keith Bush)
- fix a deadlock in the passthrough ioctl code (Scott Bauer)
- don't enable AENs if not supported (Weiping Zhang)
- fix an old regression in metadata handling in the passthrough ioctl
code (Roland Dreier)
* tag 'nvme-for-4.18' of git://git.infradead.org/nvme:
nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD
nvme: don't enable AEN if not supported
nvme: ensure forward progress during Admin passthru
nvme-pci: fix memory leak on probe failure
Pull vfs fixes from Al Viro:
"Fix several places that screw up cleanups after failures halfway
through opening a file (one open-coding filp_clone_open() and getting
it wrong, two misusing alloc_file()). That part is -stable fodder from
the 'work.open' branch.
And Christoph's regression fix for uapi breakage in aio series;
include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel
definition of sigset_t, the reason for doing so in the first place had
been bogus - there's no need to expose struct __aio_sigset in
aio_abi.h at all"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: don't expose __aio_sigset in uapi
ocxlflash_getfile(): fix double-iput() on alloc_file() failures
cxl_getfile(): fix double-iput() on alloc_file() failures
drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
kernel_wait4() expects a userland address for status - it's only
rusage that goes as a kernel one (and needs a copyout afterwards)
[ Also, fix the prototype of kernel_wait4() to have that __user
annotation - Linus ]
Fixes: 92ebce5ac5 ("osf_wait4: switch to kernel_wait4()")
Cc: stable@kernel.org # v4.13+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix interrupt type on ethernet switch for i.MX-based RDU2
- GPC on i.MX exposed too large a register window which resulted in
userspace being able to crash the machine.
- Fixup of bad merge resolution moving GPIO DT nodes under pinctrl
on droid4.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAltToboPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3gP4P/3Mntu351wZpaczDQZFQxSvxnmT2Ocr9YKFR
u5UOoE1hTCxOHcrZO7C/EbIKaqD1QhpxMPevcqpOid0glAiEj6D0c0qewAML2vwH
gGENHX5z5phwrK7RDJZhBiH2jKCg8ttOn0QSoHxGGZNSPAL2nimMwD0IbiqTI5dx
SkqecCPBwmizpfltdOCRRhN9RCiIvzcqoyLz0HjZ/sff1Y+t3U+alq227rZkQOki
bj9uD+XkKYZzgiECd6HfMtPHUSUusSXcpF/TyfdnHeyHpF1E3InPVC7dbTASFnxb
C6zrX99c2Fu11TV7Kkkn1LTwA0rRuXQmSV7ZWZMOqQBrONqGpy0CPIY+LA1xYGCd
8VtgP7qj0m7XKkPyEriwNDSKKE+c7cCYn9VpR6Kg5xmw0DUCTohMQmeZRo2sMylT
UlYMjNKQ53IuPullwRaJVM63kA3CuFo3fyStg18SYcx2lRFO8lcGJYqjqd91KkDF
ZW/tG9V6v7lz/3J3XUOFTJNWwi1CUKEIMM3ObtfDAZToyS1zbe5kX+kiTcUnvGty
wv3aWCknQnru++vYhtIYLsqwu/NwoJLTWppEmX4YxoV8fW4Yw95e3zjwzWn7rczQ
dNv7b4Hz/gpDZk7o3dpBpajTCzhh549bDfY9yxBpkd+otUKvgjKkKvsiqCkFV+j7
dcs5FMT5
=VFnX
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
- Fix interrupt type on ethernet switch for i.MX-based RDU2
- GPC on i.MX exposed too large a register window which resulted in
userspace being able to crash the machine.
- Fixup of bad merge resolution moving GPIO DT nodes under pinctrl on
droid4.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch
soc: imx: gpc: restrict register range for regmap access
ARM: dts: omap4-droid4: fix dts w.r.t. pwm
Pull x86 fix from Ingo Molnar:
"A single fix for a MCE-polling regression, which prevented the
disabling of polling"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE: Remove min interval polling limitation
Pull x86 pti fixes from Ingo Molnar:
"An APM fix, and a BTS hardware-tracing fix related to PTI changes"
* 'x86-pti-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apm: Don't access __preempt_count with zeroed fs
x86/events/intel/ds: Fix bts_interrupt_threshold alignment
Pull scheduler fixes from Ingo Molnar:
"Two fixes: a stop-machine preemption fix and a SCHED_DEADLINE fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix switched_from_dl() warning
stop_machine: Disable preemption when waking two stopper threads
Pull core kernel fixes from Ingo Molnar:
"This is mostly the copy_to_user_mcsafe() related fixes from Dan
Williams, and an ORC fix for Clang"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/memcpy_mcsafe: Fix copy_to_user_mcsafe() exception handling
lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()
lib/iov_iter: Document _copy_to_iter_flushcache()
lib/iov_iter: Document _copy_to_iter_mcsafe()
objtool: Use '.strtab' if '.shstrtab' doesn't exist, to support ORC tables on Clang
Two regression fixes, one for xmon disassembly formatting and the other to fix
the E500 build.
Two commits to fix a potential security issue in the VFIO code under obscure
circumstances.
And finally a fix to the Power9 idle code to restore SPRG3, which is user
visible and used for sched_getcpu().
Thanks to:
Alexey Kardashevskiy, David Gibson. Gautham R. Shenoy, James Clarke.
-----BEGIN PGP SIGNATURE-----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=Sfmf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two regression fixes, one for xmon disassembly formatting and the
other to fix the E500 build.
Two commits to fix a potential security issue in the VFIO code under
obscure circumstances.
And finally a fix to the Power9 idle code to restore SPRG3, which is
user visible and used for sched_getcpu().
Thanks to: Alexey Kardashevskiy, David Gibson. Gautham R. Shenoy,
James Clarke"
* tag 'powerpc-4.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Fix save/restore of SPRG3 on entry/exit from stop (idle)
powerpc/Makefile: Assemble with -me500 when building for E500
KVM: PPC: Check if IOMMU page is contained in the pinned physical page
vfio/spapr: Use IOMMU pageshift rather than pagesize
powerpc/xmon: Fix disassembly since printf changes
-----BEGIN PGP SIGNATURE-----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=f7eB
-----END PGP SIGNATURE-----
Merge tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix of a corruption regarding fsync and clone, under some very
specific conditions explained in the patch.
The fix is marked for stable 3.16+ so I'd like to get it merged now
given the impact"
* tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix file data corruption after cloning a range and fsync
Liran Alon