Commit Graph

25 Commits

Author SHA1 Message Date
Bard Liao a81844034e Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx
Save ACPI information in context so that we can match machine driver
with sdw _ADR matching tables.

Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:41 +05:30
Rander Wang ab2c913297 soundwire: intel: add wake interrupt support
When system is suspended in clock stop mode on intel platforms, both
master and slave are in clock stop mode and soundwire bus is taken
over by a glue hardware. The bus message for jack event is processed
by this glue hardware, which will trigger an interrupt to resume audio
pci device. Then audio pci driver will resume soundwire master and slave,
transfer bus ownership to master, finally slave will report jack event
to master and codec driver is triggered to check jack status.

if a slave has been attached to a bus, the slave->dev_num_sticky
should be non-zero, so we can check this value to skip the
ghost devices defined in ACPI table but not populated in hardware.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:41 +05:30
Bard Liao 4a98a6b2fa soundwire: intel/cadence: merge Soundwire interrupt handlers/threads
The existing code uses one pair of interrupt handler/thread per link
but at the hardware level the interrupt is shared. This works fine for
legacy PCI interrupts, but leads to timeouts in MSI (Message-Signaled
Interrupt) mode, likely due to edges being lost.

This patch unifies interrupt handling for all links. The dedicated
handler is removed since we use a common one for all shared interrupt
sources, and the thread function takes care of dealing with interrupt
sources. This partition follows the model used for the SOF IPC on
HDaudio platforms, where similar timeout issues were noticed and doing
all the interrupt handling/clearing in the thread improved
reliability/stability.

Validation results with 4 links active in parallel show a night-and-day
improvement with no timeouts noticed even during stress tests. Latency
and quality of service are not affected by the change - mostly because
events on a SoundWire link are throttled by the bus frame rate
(typically 8..48kHz).

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:41 +05:30
Pierre-Louis Bossart 8459cea755 soundwire: intel_init: use EXPORT_SYMBOL_NS
Make sure all symbols in this soundwire-intel-init module are exported
with a namespace.

The MODULE_IMPORT_NS will be used in Intel/SOF HDaudio modules to be
posted in a separate series.

Namespaces are only introduced for the Intel parts of the SoundWire
code at this time, in future patches we should also add namespaces for
Cadence parts and the SoundWire core.

Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 12b161468d soundwire: intel_init: add implementation of sdw_intel_enable_irq()
This function is required to enable all interrupts across all links.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 4a17c441c7 soundwire: intel: revisit SHIM programming sequences.
Somehow the existing code is not aligned with the steps described in
the documentation, refactor code and make sure the register
programming sequences are correct. Also add missing power-up,
power-down and wake capabilities (the last two are used in follow-up
patches but introduced here for consistency).

Some of the SHIM registers exposed fields that are link specific, and
in addition some of the power-related registers (SPA/CPA) take time to
be updated. Uncontrolled access leads to timeouts or errors. Add a
mutex, shared by all links, so that all accesses to such registers are
serialized, and follow a pattern of read-modify-write.

This includes making sure SHIM_SYNC is programmed only once, before
the first master is powered on. We use a 'shim_mask' field, shared
between all links and protected by a mutex, to deal with power-up and
power-down sequences.

Note that the SYNCPRD value is tied only to the XTAL value and not the
current bus frequency or the frame rate.

BugLink: https://github.com/thesofproject/linux/issues/1555
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200716150947.22119-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21 16:05:40 +05:30
Pierre-Louis Bossart 6d2c66695b soundwire: intel: transition to 3 steps initialization
Rather than a plain-vanilla init/exit, this patch provides 3 steps in
the initialization needed for driver selection, machine driver
selection and deal with power rail dependencies.

- ACPI scan: this step is done at a very early stage to detect the
presence of a SoundWire Controller and enabled links at the BIOS
level. This step may be called from the legacy HDaudio driver, which
will abort its probe to let the Sound Open Firmware (SOF) handle the
hardware.

- probe: this step allocates all the required memory and will add a
sdw_bus, which in turn will result in identifying all possible Slaves
listed below the Controller ACPI companion device. All the information
is reported to the parent PCI driver which will select the relevant
machine driver.

- startup: this last step starts the bus reset, which results in Slave
devices reporting as ATTACHED and being enumerated. This step is only
done during the card creation stage, after the DSP is powered to
account for internal power rail dependencies.

These 3 steps are already supported in the Sound Open firmware
drivers and upstream.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart 4ab34412fc soundwire: intel_init: pass link information as platform data
It's not clear how this code ever worked, the link information is used
in intel.c but never passed as platform_data.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart dd906cc615 soundwire: intel_init: use devm_ allocation
Make error handling simpler with devm_ allocation.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart 9cd1c5a721 soundwire: intel_init: remove useless test
No need to test link_mask twice

Suggested-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Pierre-Louis Bossart b6109dd6dc soundwire: intel: cleanups for indirections/logs
The code can be simplified a bit to have a more consistent use of
'dev' and 'bus', as well as move definitions around. This will help
make the major changes in follow-up patches easier to review.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200531182102.27840-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22 17:21:36 +05:30
Guennadi Liakhovetski 6f7219fecf soundwire: intel: (cosmetic) remove multiple superfluous "else" statements
No need for an "else" after a "return" statement. Remove multiple such
occurrences in Intel-specific code.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200508003046.23162-3-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11 11:42:39 +05:30
Rander Wang 4b206d34b9 soundwire: intel: update stream callbacks for hwparams/free stream operations
The SoundWire DAIs for Intel platform are created in
drivers/soundwire/intel.c, while the communication with the Intel DSP
is all controlled in soc/sof/intel

When the DAI status changes, a callback is used to bridge the gap
between the two subsystems.

The naming of the existing 'config_stream' callback does not map well
with any of ALSA/ASoC concepts. This patch renames it as
'params_stream' to be more self-explanatory.

A new 'free_stream' callback is added in case any resources allocated
in the 'params_stream' stage need to be released. In the SOF
implementation, this is used in the hw_free case to release the DMA
channels over IPC.

These two callbacks now rely on structures which expose the link_id
and alh_stream_id (required by the firmware IPC), instead of a list of
parameters. The 'void *' definitions are changed to use explicit
types, as suggested on alsa-devel during earlier reviews.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191212014507.28050-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-12 09:17:06 +05:30
Pierre-Louis Bossart f98f690fb0 soundwire: intel: update interfaces between ASoC and SoundWire
The current interfaces between ASoC and SoundWire are limited by the
platform_device infrastructure to an init() and exit() (mapped to the
platform driver.probe and .remove)

To help with the platform detection, machine driver selection and
management of power dependencies between DSP and SoundWire IP, the
ASoC side requires:

a) an ACPI scan helper, to report if any devices are exposed in the
DSDT tables, and if any links are disabled by the BIOS.

b) a probe helper that allocates the resources without actually
starting the bus.

c) a startup helper which does start the bus when all power
dependencies are settled.

d) an exit helper to free all resources

e) an interrupt_enable/disable helper, typically invoked after the
startup helper but also used in suspend routines.

This patch moves all required interfaces to sdw_intel.h, mainly to
allow SoundWire and ASoC parts to be merged separately once the header
files are shared between trees.

To avoid compilation issues, the conflicts in intel_init.c are blindly
removed. This would in theory prevent the code from working, but since
there are no users of the Intel Soundwire driver this has no
impact. Functionality will be restored when the removal of platform
devices is complete.

Support for SoundWire + SOF builds will only be provided once all the
required pieces are upstream.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191212014507.28050-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-12 09:17:06 +05:30
Vinod Koul 3fc40449a0 soundwire: intel: use correct header for io calls
Commit df72b71921 ("soundwire: intel: add missing headers for
cross-compilation") tried to fix cross compilation but erroneously used
wrong header in one of the file. Fix it by using correct io.h header.

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: df72b71921 ("soundwire: intel: add missing headers for cross-compilation")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-22 10:03:08 +05:30
Pierre-Louis Bossart df72b71921 soundwire: intel: add missing headers for cross-compilation
readl/writel and ioread32 are used without the relevant headers, fix.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916185739.32184-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-16 10:36:29 +05:30
Pierre-Louis Bossart 50302fc7b9 soundwire: intel_init: add kernel module parameter to filter out links
The hardware and ACPI info may report the presence of links that are
not physically enabled (e.g. due to pin-muxing or hardware reworks),
which in turn can result in errors being thrown. This shouldn't be the
case for production devices but will happen a lot on development
devices - even more so when they expose a connector.

Even when the ACPI information is correct, it's useful to be able to
only enable the links that need attention - mostly to filter out
dynamic debug messages.

Add a module parameter to filter out such links, e.g. adding the
following config to a file in /etc/modprobe.d will select the second
and third links only.

options soundwire_intel_init sdw_link_mask=0x6

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190806005522.22642-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21 14:36:18 +05:30
Pierre-Louis Bossart 432732b801 soundwire: intel_init: add checks on link numbers
Add mask to correctly read the SoundWire SHIM LCAP register. Only bits
2..0 are meaningful, the rest is about link synchronization and stream
channel mapping. Without this mask, the hardware information would
always be larger than whatever the BIOS would report.

Also trap the case with zero links.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27 10:53:00 +05:30
Pierre-Louis Bossart 6f11586f48 soundwire: intel: filter SoundWire controller device search
The convention is that the SoundWire controller device is a child of
the HDAudio controller. However there can be more than one child
exposed in the DSDT table, and the current namespace walk returns the
last (incorrect) device.

Intel documentation states that bits 28..31 of the _ADR field
represent the link type, with SoundWire assigned the value 4.

Add a filter and terminate early when a valid _ADR is provided,
otherwise keep iterating to find the next child.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27 10:52:59 +05:30
Vinod Koul d6badd1c15 soundwire: intel: remove empty line after braces
Linux code style doesn't expect empty lines after braces and
gives warning:

CHECK: Blank lines aren't necessary after an open brace '{'

Remove the empty line in intel module

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:17:51 +02:00
Pierre-Louis Bossart 505ccb0065 soundwire: intel_init: fix alignment issues
Use Linux style

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02 17:16:28 +02:00
Paul Gortmaker 4abbd783d1 soundwire: intel: fix implicit header use of module.h/export.h
These two files are implicitly relying on an instance of including
module.h from <linux/acpi.h>.

Ideally, header files under include/linux shouldn't be adding
includes of other headers, in anticipation of their consumers,
but just the headers needed for the header itself to pass
parsing with CPP.

The module.h is particularly bad in this sense, as it itself does
include a whole bunch of other headers, due to the complexity of
module support.

Here, we make those includes explicit, in order to allow a future
removal of module.h from linux/acpi.h without causing build breakage.

Cc: Vinod Koul <vkoul@kernel.org>
Cc: Sanyog Kale <sanyog.r.kale@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-14 15:52:50 +05:30
Vinod Koul e1c815f4b2 soundwire: intel: Fix uninitialized adev deref
In case of error, we can dereference uninitialized 'adev'

drivers/soundwire/intel_init.c:154 sdw_intel_acpi_cb()
error: uninitialized symbol 'adev'.

Fix that by not using adev for warn print and make it pr_err.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27 09:49:48 +05:30
Vinod Koul c46302ec55 soundwire: intel: Add audio DAI ops
Add DAI registration and DAI ops for the Intel driver along with
callback for topology configuration.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11 21:48:07 +05:30
Vinod Koul d62a7d41f3 soundwire: intel: Add Intel init module
The SoundWire Master is implemented as part of Audio controller in
Intel platforms. Add a init module which creates SoundWire Master
platform devices based on the links supported in the hardware.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19 11:32:35 +01:00