When I cat some ipmi_watchdog parameters by sysfs, it displays as
follows. It's better to add a newline for easy reading.
root@(none):/# cat /sys/module/ipmi_watchdog/parameters/action
resetroot@(none):/# cat /sys/module/ipmi_watchdog/parameters/preaction
pre_noneroot@(none):/# cat /sys/module/ipmi_watchdog/parameters/preop
preop_noneroot@(none):/#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Message-Id: <1595313309-43881-1-git-send-email-wangxiongfeng2@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
__ipmi_bmc_register() jumps to the label 'out_free_my_dev_name' in an
error path. So we can remove duplicate code in the if (rv).
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Message-Id: <20200720080838.148737-1-jingxiangfeng@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
commit 9162052173 ("ipmi: Add alert handling to SSIF") introduces
support of SMBus alert. So, just remove TODO comment in order not to
confuse future readers.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Message-Id: <20200624065405.17653-2-misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A few small fixes for things, nothing earth shattering.
-corey
-----BEGIN PGP SIGNATURE-----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=nuZ5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A few small fixes for things, nothing earth shattering"
* tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi:
ipmi:ssif: Remove dynamic platform device handing
Try to load acpi_ipmi when an SSIF ACPI IPMI interface is added
ipmi_si: Load acpi_ipmi when ACPI IPMI interface added
ipmi:bt-bmc: Fix error handling and status check
ipmi: Replace guid_copy() with import_guid() where it makes sense
ipmi: use vzalloc instead of kmalloc for user creation
ipmi:bt-bmc: Fix some format issue of the code
ipmi:bt-bmc: Avoid unnecessary check
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
Platform devices can only come in through the DMI interface, and that
will get done before initialization is complete. Therefore there is no
reason to hande getting a device in new_ssif_client after
initialization.
Dynamic entries can still come in through the i2c interfaces, but that's
handled differently.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Try to load acpi_ipmi when an ACPI IPMI interface is added, so that the
ACPI IPMI OpRegion is accessible.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Message-Id: <20200311192409.59923-1-stuart.w.hayes@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
bt_bmc_config_irq(). And in the function bt_bmc_probe(),
when get irq failed, it will print error message. So use
platform_get_irq_optional() to simplify code. Finally in the
function bt_bmc_remove() should make the right status check
if get irq failed.
Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Message-Id: <20200505102906.17196-1-tangbin@cmss.chinamobile.com>
[Also set bt_bmc->irq to a negative value if devm_request_irq() fails.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There is a specific API to treat raw data as GUID, i.e. import_guid().
Use it instead of guid_copy() with explicit casting.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20200422130348.38749-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We met mulitple times of failure of staring bmc-watchdog,
due to the runtime memory allocation failure of order 4.
bmc-watchdog: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 1 PID: 2571 Comm: bmc-watchdog Not tainted 5.5.0-00045-g7d6bb61d6188c #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0015.110720180833 11/07/2018
Call Trace:
dump_stack+0x66/0x8b
warn_alloc+0xfe/0x160
__alloc_pages_slowpath+0xd3e/0xd80
__alloc_pages_nodemask+0x2f0/0x340
kmalloc_order+0x18/0x70
kmalloc_order_trace+0x1d/0xb0
ipmi_create_user+0x55/0x2c0 [ipmi_msghandler]
ipmi_open+0x72/0x110 [ipmi_devintf]
chrdev_open+0xcb/0x1e0
do_dentry_open+0x1ce/0x380
path_openat+0x305/0x14f0
do_filp_open+0x9b/0x110
do_sys_open+0x1bd/0x250
do_syscall_64+0x5b/0x1f0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Using vzalloc/vfree for creating ipmi_user heals the
problem
Thanks to Stephen Rothwell for finding the vmalloc.h
inclusion issue.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Fix some format issue of the code in bt-bmc.c
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com>
Message-Id: <20200414141814.19048-1-tangbin@cmss.chinamobile.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
bt_bmc_probe() is only called with an openfirmware platform device.
Therefore there is no need to check that the passed in device is NULL or
that it has an openfirmware node.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Message-Id: <20200408115958.2848-1-tangbin@cmss.chinamobile.com>
[Fixed the title up a bit.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This needs to return the newly allocated struct but instead it returns
zero which leads to an immediate Oops in the caller.
Fixes: 09f5f68070 ("ipmi: kcs: aspeed: Implement v2 bindings")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20200407122149.GA100026@mwanda>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Sparse reports a warning at ipmi_ssif_unlock_cond()
and ipmi_ssif_lock_cond()
warning: context imbalance in ipmi_ssif_lock_cond()
- wrong count at exit
warning: context imbalance in ipmi_ssif_unlock_cond()
- unexpected unlock
The root cause is the missing annotation at ipmi_ssif_unlock_cond()
and ipmi_ssif_lock_cond()
Add the missing __acquires(&ata_scsi_rbuf_lock)
Add the missing __releases(&ata_scsi_rbuf_lock)
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Message-Id: <20200403160505.2832-6-jbi.octave@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The v2 bindings allow us to extract the resources from the devicetree.
The table in the driver is retained to derive the channel index, which
removes the need for kcs_chan property from the v1 bindings. The v2
bindings allow us to reduce the number of warnings generated by the
existing devicetree nodes.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Message-Id: <01ef3787e9ddaa9d87cfd55a2ac793053b5a69de.1576462051.git-series.andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The interrupts were configured after the channel was enabled. Configure
them beforehand so they will work.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Message-Id: <c0aba2c9dfe2d0525e9cefd37995983ead0ec242.1576462051.git-series.andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
intf->cmd_rcvrs is traversed with list_for_each_entry_rcu
outside an RCU read-side critical section but under the
protection of intf->cmd_rcvrs_mutex.
ipmi_interfaces is traversed using list_for_each_entry_rcu
outside an RCU read-side critical section but under the protection
of ipmi_interfaces_mutex.
Hence, add the corresponding lockdep expression to the list traversal
primitive to silence false-positive lockdep warnings, and
harden RCU lists.
Add macro for the corresponding lockdep expression to make the code
clean and concise.
Signed-off-by: Amol Grover <frextrite@gmail.com>
Message-Id: <20200117132521.31020-1-frextrite@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Although the IRQ assignment in ipmi_si driver is optional,
platform_get_irq() spews error messages unnecessarily:
ipmi_si dmi-ipmi-si.0: IRQ index 0 not found
Fix this by switching to platform_get_irq_optional().
Cc: stable@vger.kernel.org # 5.4.x
Cc: John Donnelly <john.p.donnelly@oracle.com>
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Reported-and-tested-by: Patrick Vo <patrick.vo@hpe.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-Id: <20200205093146.1352-1-tiwai@suse.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The end of buffer check is off-by-one since the check is against
an index that is pre-incremented before a store to buf[]. Fix this
adjusting the bounds check appropriately.
Addresses-Coverity: ("Out-of-bounds write")
Fixes: 51bd6f2915 ("Add support for IPMB driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20200114144031.358003-1-colin.king@canonical.com>
Reviewed-by: Asmaa Mnebhi <asmaa@mellanox.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In error cases a NULL can be passed to memcpy. The length will always
be zero, so it doesn't really matter, but go ahead and check for NULL,
anyway, to be more precise and avoid static analysis errors.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
As per IPMB specification, maximum packet size supported is 255,
modified Max length to 240 from 128 to accommodate more data.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Message-Id: <20191211190155.1279610-1-vijaykhemka@fb.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Many IPMB devices don't support smbus protocol and this driver
only supports the smbus protocol at the moment.
Added support for the i2c protocol as well. There will be a variable
"i2c-protocol" passed by the device tree or ACPI table which determines
whether the protocol is i2c or smbus.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Asmaa Mnebhi <asmaa@mellanox.com>
Message-Id: <20191211185604.1266063-1-vijaykhemka@fb.com>
[IPMB.txt had moved to driver-api/ipmb.rst, I adjusted]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Here is the big set of char/misc and other driver patches for 5.5-rc1
Loads of different things in here, this feels like the catch-all of
driver subsystems these days. Full details are in the shortlog, but
nothing major overall, just lots of driver updates and additions.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6ewA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymNXACfebVkDrFOH9EqDgFArPvZ1i9EmZ4AoLbE1Wki
ftJApk+Ov1BT2TvClOza
=cXqg
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other driver patches for 5.5-rc1
Loads of different things in here, this feels like the catch-all of
driver subsystems these days. Full details are in the shortlog, but
nothing major overall, just lots of driver updates and additions.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits)
char: Fix Kconfig indentation, continued
habanalabs: add more protection of device during reset
habanalabs: flush EQ workers in hard reset
habanalabs: make the reset code more consistent
habanalabs: expose reset counters via existing INFO IOCTL
habanalabs: make code more concise
habanalabs: use defines for F/W files
habanalabs: remove prints on successful device initialization
habanalabs: remove unnecessary checks
habanalabs: invalidate MMU cache only once
habanalabs: skip VA block list update in reset flow
habanalabs: optimize MMU unmap
habanalabs: prevent read/write from/to the device during hard reset
habanalabs: split MMU properties to PCI/DRAM
habanalabs: re-factor MMU masks and documentation
habanalabs: type specific MMU cache invalidation
habanalabs: re-factor memory module code
habanalabs: export uapi defines to user-space
habanalabs: don't print error when queues are full
habanalabs: increase max jobs number to 512
...
ipmb_poll() is defined as returning 'unsigned int' but the
.poll method is declared as returning '__poll_t', a bitwise type.
Fix this by using the proper return type and using the EPOLL
constants instead of the POLL ones, as required for __poll_t.
CC: Corey Minyard <minyard@acm.org>
CC: openipmi-developer@lists.sourceforge.net
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Message-Id: <20191120000741.30657-1-luc.vanoostenryck@gmail.com>
Reviewed-by: Asmaa Mnebhi <asmaa@mellanox.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Adjust indentation from seven spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191121132842.28942-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191120134247.16073-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct timespec' is getting removed from the kernel. The usage in ipmi
was fixed before in commit 48862ea2ce ("ipmi: Update timespec usage
to timespec64"), but unfortunately it crept back in.
The busy looping code can better use ktime_t anyway, so use that
there to simplify the implementation.
Fixes: cbb19cb1ee ("ipmi_si: Convert timespec64 to timespec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20191108203435.112759-5-arnd@arndb.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Removed check for request or response in IPMB packets coming from
device as well as from host. Now it supports both way communication
to device via IPMB. Both request and response will be passed to
application.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Message-Id: <20191106182921.1086795-1-vijaykhemka@fb.com>
Reviewed-by: Asmaa Mnebhi <Asmaa@mellanox.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
All watchdog drivers implement the same set of ioctl commands, and
fortunately all of them are compatible between 32-bit and 64-bit
architectures.
Modern drivers always go through drivers/watchdog/wdt.c as an abstraction
layer, but older ones implement their own file_operations on a character
device for this.
Move the handling from fs/compat_ioctl.c into the individual drivers.
Note that most of the legacy drivers will never be used on 64-bit
hardware, because they are for an old 32-bit SoC implementation, but
doing them all at once is safer than trying to guess which ones do
or do not need the compat_ioctl handling.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the impelementation of __ipmi_bmc_register() the allocated memory for
bmc should be released in case ida_simple_get() fails.
Fixes: 68e7e50f19 ("ipmi: Don't use BMC product/dev ids in the BMC name")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Message-Id: <20191021200649.1511-1-navid.emamdoost@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Message-Id: <20191016092131.23096-1-yuehaibing@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use %*ph format to print small buffer as hex string.
The change is safe since the specifier can handle up to 64 bytes and taking
into account the buffer size of 100 bytes on stack the function has never been
used to dump more than 32 bytes. Note, this also avoids potential buffer
overflow if the length of the input buffer is bigger.
This completely eliminates ipmi_debug_msg() in favour of Dynamic Debug.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20191011155036.36748-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If something has the IPMI driver open, don't allow the device
module to be unloaded. Before it would unload and the user would
get errors on use.
This change is made on user request, and it makes it consistent
with the I2C driver, which has the same behavior.
It does change things a little bit with respect to kernel users.
If the ACPI or IPMI watchdog (or any other kernel user) has
created a user, then the device module cannot be unloaded. Before
it could be unloaded,
This does not affect hot-plug. If the device goes away (it's on
something removable that is removed or is hot-removed via sysfs)
then it still behaves as it did before.
Reported-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: tony camuso <tcamuso@redhat.com>
smi_mod_timer() enables the timer before setting timer_running. This
means the timer can be running when we get to stop_timer_and_thread()
without timer_running having been set, resulting in del_timer_sync()
not being called and the timer being left to cause havoc during
shutdown.
Instead just call del_timer_sync() unconditionally
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Message-Id: <20190828203625.32093-2-Jes.Sorensen@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
V1->V2: in handle_one_rcv_msg, if data_size > 2, set requeue to zero and
goto out instead of calling ipmi_free_msg.
Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
In the source stack trace below, function set_need_watch tries to
take out the same si_lock that was taken earlier by ipmi_thread.
ipmi_thread() [drivers/char/ipmi/ipmi_si_intf.c:995]
smi_event_handler() [drivers/char/ipmi/ipmi_si_intf.c:765]
handle_transaction_done() [drivers/char/ipmi/ipmi_si_intf.c:555]
deliver_recv_msg() [drivers/char/ipmi/ipmi_si_intf.c:283]
ipmi_smi_msg_received() [drivers/char/ipmi/ipmi_msghandler.c:4503]
intf_err_seq() [drivers/char/ipmi/ipmi_msghandler.c:1149]
smi_remove_watch() [drivers/char/ipmi/ipmi_msghandler.c:999]
set_need_watch() [drivers/char/ipmi/ipmi_si_intf.c:1066]
Upstream commit e1891cffd4 adds code to
ipmi_smi_msg_received() to call smi_remove_watch() via intf_err_seq()
and this seems to be causing the deadlock.
commit e1891cffd4
Author: Corey Minyard <cminyard@mvista.com>
Date: Wed Oct 24 15:17:04 2018 -0500
ipmi: Make the smi watcher be disabled immediately when not needed
The fix is to put all messages in the queue and move the message
checking code out of ipmi_smi_msg_received and into handle_one_recv_msg,
which processes the message checking after ipmi_thread releases its
locks.
Additionally,Kosuke Tatsukawa <tatsu@ab.jp.nec.com> reported that
handle_new_recv_msgs calls ipmi_free_msg when handle_one_rcv_msg returns
zero, so that the call to ipmi_free_msg in handle_one_rcv_msg introduced
another panic when "ipmitool sensor list" was run in a loop. He
submitted this part of the patch.
+free_msg:
+ requeue = 0;
+ goto out;
Reported by: Osamu Samukawa <osa-samukawa@tg.jp.nec.com>
Characterized by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Fixes: e1891cffd4 ("ipmi: Make the smi watcher be disabled immediately when not needed")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Corey Minyard <cminyard@mvista.com>
It is possible that SSIF interface entry is present in both DMI and ACPI
tables. In SMP systems, in such cases it is possible that ssif_probe could
be called simultaneously from i2c interface (from ACPI) and from DMI on
different CPUs at kernel boot. Both try to register same SSIF interface
simultaneously and result in race.
In such cases where ACPI and SMBIOS both IPMI entries are available, we
need to prefer ACPI over SMBIOS so that ACPI functions work properly if
they use IPMI.
So, if we get an ACPI interface and have already registered an SMBIOS
at the same address, we need to remove the SMBIOS one and add the ACPI.
Log:
[ 38.774743] ipmi device interface
[ 38.805006] ipmi_ssif: IPMI SSIF Interface driver
[ 38.861979] ipmi_ssif i2c-IPI0001:06: ssif_probe CPU 99 ***
[ 38.863655] ipmi_ssif 0-000e: ssif_probe CPU 14 ***
[ 38.863658] ipmi_ssif: Trying SMBIOS-specified SSIF interface at i2c address 0xe, adapter xlp9xx-i2c, slave address 0x0
[ 38.869500] ipmi_ssif: Trying ACPI-specified SSIF interface at i2c address 0xe, adapter xlp9xx-i2c, slave address 0x0
[ 38.914530] ipmi_ssif: Unable to clear message flags: -22 7 c7
[ 38.952429] ipmi_ssif: Unable to clear message flags: -22 7 00
[ 38.994734] ipmi_ssif: Error getting global enables: -22 7 00
[ 39.015877] ipmi_ssif 0-000e: IPMI message handler: Found new BMC (man_id: 0x00b3d1, prod_id: 0x0001, dev_id: 0x20)
[ 39.377645] ipmi_ssif i2c-IPI0001:06: IPMI message handler: Found new BMC (man_id: 0x00b3d1, prod_id: 0x0001, dev_id: 0x20)
[ 39.387863] ipmi_ssif 0-000e: IPMI message handler: BMC returned incorrect response, expected netfn 7 cmd 42, got netfn 7 cmd 1
...
[NOTE] : Added custom prints to explain the problem.
In the above log, ssif_probe is executed simultaneously on two different
CPUs.
This patch fixes this issue in following way:
- Adds ACPI entry also to the 'ssif_infos' list.
- Checks the list if SMBIOS is already registered, removes it and adds
ACPI.
- If ACPI is already registered, it ignores SMBIOS.
- Adds mutex lock throughout the probe process to avoid race.
Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com>
Message-Id: <1566389064-27356-1-git-send-email-kamlakantp@marvell.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
If the driver handles a response in an oops, it was just ignoring
the message. However, the IPMI watchdog timer was counting on the
free happening to know when panic-time messages were complete. So
free it in all cases.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.
This was originally added so firmware updates through IPMI would
complete in a timely manner. But we can't kill the scheduler
locks for that one use case.
Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
ipmi_si_sm.h was getting included in lots of places it didn't
belong. Rework things a bit to remove all the dependencies,
mostly just moving things between include files that were in
the wrong place and removing bogus includes.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There is no need for timespec64, and it will cause issues in the
future with i386 and 64-bit division not being available.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
ret at line 112 of ipmb_dev_int.c is uninitialized which
results in a warning during build regressions.
This warning was found by build regression/improvement
testing for v5.3-rc1.
Reported-by: build regression/improvement testing for v5.3-rc1.
Fixes: 51bd6f2915 ("Add support for IPMB driver")
Signed-off-by: Asmaa Mnebhi <Asmaa@mellanox.com>
Message-Id: <571dbb67cf58411d567953d9fb3739eb4789238b.1563996586.git.Asmaa@mellanox.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
by automated tools.
Plus add a driver that allows Linux to act as an IPMB slave device,
so it can be a satellite MC in an IPMI network.
-----BEGIN PGP SIGNATURE-----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=SCDk
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Some small fixes for various things, nothing huge, mostly found by
automated tools.
Plus add a driver that allows Linux to act as an IPMB slave device, so
it can be a satellite MC in an IPMI network"
* tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi:
docs: ipmb: place it at driver-api and convert to ReST
fix platform_no_drv_owner.cocci warnings
ipmi: ipmb: don't allocate i2c_client on stack
ipmi: ipmb: Fix build error while CONFIG_I2C is set to m
Add support for IPMB driver
drivers: ipmi: Drop device reference
ipmi_ssif: fix unexpected driver unregister warning
ipmi_si: use bool type for initialized variable
ipmi_si: fix unexpected driver unregister warning
Gustavo A. R. Silva