Nothing can stop a host from submitting invalid commands. The target
just needs to respond with an appropriate status, but that's not a
target error. Demote invalid command messages to the debug level so
these events don't spam the kernel logs.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a request finally completes in end_io() after it has failed over,
the bdev pointer can be stale and thus the system can crash. Set the
bdev back to ns head, so the request is map to an active path when
resubmitted.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
reset_work() in nvme-pci may hang forever in the following scenario:
1) A reset caused by a command timeout occurs due to a controller being
temporarily irresponsive.
2) nvme_reset_work() restarts admin queue at nvme_alloc_admin_tags(). At
the same time, a user-submitted admin command is queued and waiting
for completion. Then, reset_work() changes its state to CONNECTING,
and submits an identify command.
3) However, the controller does still not respond to any command,
causing a timeout being fired at the user-submitted command.
Unfortunately, nvme_timeout() does not see the completion on cq, and
any timeout that takes place under CONNECTING state causes a
controller shutdown.
4) Normally, the identify command in reset_work() would be canceled with
SC_HOST_ABORTED by nvme_dev_disable(), then reset_work can tear down
the controller accordingly. But the controller happens to return
online and respond the identify command before nvme_dev_disable()
should have been reaped it off.
5) reset_work() continues to setup_io_queues() as it observes no error
in init_identify(). However, the admin queue has already been
quiesced in dev_disable(). Thus, any following commands would be
blocked forever in blk_execute_rq().
This can be fixed by restricting usercmd commands when controller is not
in a LIVE state in nvme_queue_rq(), as what has been done previously in
fabrics.
```
nvme_reset_work(): |
nvme_alloc_admin_tags() |
| nvme_submit_user_cmd():
nvme_init_identify(): | ...
__nvme_submit_sync_cmd(): |
... | ...
---------------------------------------> nvme_timeout():
(Controller starts reponding commands) | nvme_dev_disable(, true):
nvme_setup_io_queues(): |
__nvme_submit_sync_cmd(): |
(hung in blk_execute_rq |
since run_hw_queue sees |
queue quiesced) |
```
Signed-off-by: Tao Chiu <taochiu@synology.com>
Signed-off-by: Cody Wong <codywong@synology.com>
Reviewed-by: Leon Chien <leonchien@synology.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
queue_rq() in pci only checks if the dispatched queue (nvmeq) is ready,
e.g. not being suspended. Since nvme_alloc_admin_tags() in reset flow
restarts the admin queue, users are able to submit admin commands to a
controller before reset_work() completes. Commands submitted under this
condition may interfere with commands that performs identify, IO queue
setup in reset_work(), and may result in a hang described in the
following patch.
As seen in the fabrics, user commands are prevented from being executed
under inproper controller states. We may reuse this logic to maintain a
clear admin queue during reset_work().
Signed-off-by: Tao Chiu <taochiu@synology.com>
Signed-off-by: Cody Wong <codywong@synology.com>
Reviewed-by: Leon Chien <leonchien@synology.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_clear_nvme_request() clears the nvme_command, which is unncessary
for passthrough requests as nvme_command is overwritten immediately.
Move clearing part from this helper to the caller, so that double memset
for passthrough requests is avoided.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In multipath case, we should consider namespace attachment with
controllers in a subsystem when we find out the live controller for the
namespace. This patch manually reverted the commit 3557a44097
("nvme: don't bother to look up a namespace for controller ioctls") with
few more updates to nvme_ns_head_chr_ioctl which has been newly updated.
Fixes: 3557a44097 ("nvme: don't bother to look up a namespace for
controller ioctls")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Userspace has not been allowed to I/O to device that's failed to
be initialized. This patch introduces generic per-namespace character
device to allow userspace to I/O regardless the block device is there or
not.
The chardev naming convention will similar to the existing blkdev naming,
using a ng prefix instead of nvme, i.e.
- /dev/ngXnY
It also supports multipath which means it will not expose chardev for the
hidden namespace blkdevs (e.g., nvmeXcYnZ). If /dev/ngXnY is created for
a ns_head, then I/O request will be routed to a specific controller
selected by the iopolicy of the subsystem.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove a level of indentation from the main code implementating the table
search by using a goto for the APST not supported case. Also move the
main comment above the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Do not call nvme_configure_apst when the controller is not live, given
that nvme_configure_apst will fail due the lack of an admin queue when
the controller is being torn down and nvme_set_latency_tolerance is
called from dev_pm_qos_hide_latency_tolerance.
Fixes: 510a405d945b("nvme: fix memory leak for power latency tolerance")
Reported-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add a 'kato' controller sysfs attribute to display the current
keep-alive timeout value (if any). This allows userspace to identify
persistent discovery controllers, as these will have a non-zero
KATO value.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to the NVMe base spec the KATO commands should be sent
at half of the KATO interval, to properly account for round-trip
times.
As we now will only ever send one KATO command per connection we
can easily use the recommended values.
This also fixes a potential issue where the request timeout for
the KATO command does not match the value in the connect command,
which might be causing spurious connection drops from the target.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Issue following command:
nvme set-feature -f 0xf -v 0 /dev/nvme1n1 # disable keep-alive timer
nvme admin-passthru -o 0x18 /dev/nvme1n1 # send keep-alive command
will make keep-alive timer fired and thus delete the controller like
below:
[247459.907635] nvmet: ctrl 1 keep-alive timer (0 seconds) expired!
[247459.930294] nvmet: ctrl 1 fatal error occurred!
Avoid this by not queuing delayed keep-alive if it is disabled when
keep-alive command is received from the admin queue.
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Adding entry for dev_attr_fast_io_fail_tmo to avoid the kernel crash
while reading and writing the fast_io_fail_tmo.
Fixes: 09fbed6363 (nvme: export fast_io_fail_tmo to sysfs)
Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead of failing to scan the namespace entirely when unsupported
features are detected, just mark the gendisk hidden but allow other
access like the upcoming per-namespace character device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
These will be reused for the per-namespace character devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Move the multipath block_device_operations to multipath.c, where they
belong.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Split out the ioctl code from core.c into a new file. Also update
copyrights while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Don't bother to look up a namespace just to drop if after retreiving the
controller for the multipath case. Just look up a live controller for
the subsystem directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Only use the existing ioctl handler for the multipath case, and add a
simpler one that reverts to the pre-multipath case for not shared
use case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Don't bother defining a separate compat_ioctl handler, and just handle
the NVME_IOCTL_SUBMIT_IO32 case inline. Also only defined it for those
ABIs (currently just i386 vs x86_64) that are affected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Factor out a helper for the namespace based ioctls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Pass the proper user pointer instead of the not all that useful integer
representation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Return false from nvme_set_disk_name and let the caller set the
non-multipath name instead of duplicating the naming information in two
places. Also remove the pointless local variables for the disk name
and flags and the not needed ctrl argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Move the multipath gendisk out of #ifdef CONFIG_NVME_MULTIPATH and add
a new nvme_ns_head_multipath that uses it to check if a ns_head has
a multipath device associated with it.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: added the IS_ENABLED, converted a few existing users]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
There is a single trailing whitespace in core.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is a single trailing whitespace in multipath.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is a single trailing whitespace in pci.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to the module parameter description for sgl_threshold,
a value of 0 means that SGLs are disabled.
If SGLs are disabled, we should respect that, even for the case
where the request is made up of a single physical segment.
Fixes: 297910571f ("nvme-pci: optimize mapping single segment requests using SGLs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is a spelling mistake in a pr_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Once a host is already created, avoid allocate additional hostports that
will be thrown away. add an helper function to handle host search.
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case there is an io that contains inline data and it goes to
parsing error flow, command response will free command and iov
before clearing the data on the socket buffer.
This will delay the command response until receive flow is completed.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Instead of overloading the passthrough fast path with the deprecated
block layer bounce buffering let the users that combine an old
undermaintained driver with a highmem system pay the price by always
falling back to copies in that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of triggering an integer overflow and undefined behavior if MDTS is
large, set max_hw_sectors to UINT_MAX.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[hch: rebased to account for the new nvme_mps_to_sectors helper]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.
The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a passthru command targets a specific namespace, the ns parameter to
nvme_user_cmd()/nvme_user_cmd64() is set. However, there is currently no
validation that the nsid specified in the passthru command targets the
namespace/nsid represented by the block device that the ioctl was
performed on.
Add a check that validates that the nsid in the passthru command matches
that of the supplied namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If ANA is enabled but no ANA group descriptor is found when creating
a new namespace the ANA log is most likely out of date, so trigger
a re-read. The namespace will be tagged with the NS_ANA_PENDING flag
to exclude it from path selection until the ANA log has been re-read.
Fixes: 32acab3181 ("nvme: implement multipath access to nvme subsystems")
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 8c4dfea97f ("nvme-fabrics: reject I/O to offline device")
introduced fast_io_fail_tmo but didn't export the value to sysfs. The
value can be set during the 'nvme connect'. Export the timeout value
to user space via sysfs to allow runtime configuration.
Cc: Victor Gladkov <Victor.Gladkov@kioxia.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhaani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If there is an error we will leave the function early. So there
is no need for an else. Remove it.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
SGLs support is mandatory for NVMe/FC, make sure that the target is
aligned to the specification.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
SGLs support is mandatory for NVMe/tcp, make sure that the target is
aligned to the specification.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add 'idle_poll_period_usecs' option used by io_work() to support
network devices enabled with advanced interrupt moderation
supporting a relaxed interrupt model. It was discovered that
such a NIC used on the target was unable to support initiator
connection establishment, caused by the existing io_work()
flow that immediately exits after a loop with no activity and
does not re-queue itself.
With this new option a queue is assigned a period of time
that no activity must occur in order to become 'idle'. Until
the queue is idle the work item is requeued.
The new module option is defined as changeable making it
flexible for testing purposes.
The pre-existing legacy behavior is preserved when no module option
for idle_poll_period_usecs is specified.
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The TCP stack can run from process context for a long time
so we should disable BH here.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch