This list was designed to store struct nfs4_client in the client side.
But nfs4_client was obsolete and has been removed from the source code.
So remove the unused list.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove duplicate function declaration in internal.h
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
[Trond: Added nfs_pageio_init_read, which suffered from the same problem]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In rare circumstances, nfs_clone_server() of a v2 or v3 server can get
an error between setting server->destory (to nfs_destroy_server), and
calling nfs_start_lockd (which will set server->nlm_host).
If this happens, nfs_clone_server will call nfs_free_server which
will call nfs_destroy_server and thence nlmclnt_done(NULL). This
causes the NULL to be dereferenced.
So add a guard to only call nlmclnt_done() if ->nlm_host is not NULL.
The other guards there are irrelevant as nlm_host can only be non-NULL
if one of these flags are set - so remove those tests. (Thanks to Trond
for this suggestion).
This is suitable for any stable kernel since 2.6.25.
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, when an RPCSEC_GSS context has expired or is non-existent
and the users (Kerberos) credentials have also expired or are non-existent,
the client receives the -EKEYEXPIRED error and tries to refresh the context
forever. If an application is performing I/O, or other work against the share,
the application hangs, and the user is not prompted to refresh/establish their
credentials. This can result in a denial of service for other users.
Users are expected to manage their Kerberos credential lifetimes to mitigate
this issue.
Move the -EKEYEXPIRED handling into the RPC layer. Try tk_cred_retry number
of times to refresh the gss_context, and then return -EACCES to the application.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFS DIO code will dirty pages that catch read responses in order to
handle the case where someone is doing DIO reads into an mmapped buffer.
The existing code doesn't really do the right thing though since it
doesn't take into account the case where we might be attempting to read
past the EOF.
Fix the logic in that code to only dirty pages that ended up receiving
data from the read. Note too that it really doesn't matter if
NFS_IOHDR_ERROR is set or not. All that matters is if the page was
altered by the read.
Cc: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Eryu provided a test program that would segfault when attempting to read
past the EOF on file that was opened O_DIRECT. The buffer given to the
read() call was on the stack, and when he attempted to read past it it
would scribble over the rest of the stack page.
If we hit the end of the file on a DIO READ request, then we don't want
to zero out the rest of the buffer. These aren't pagecache pages after
all, and there's no guarantee that the buffers that were passed in
represent entire pages.
Cc: <stable@vger.kernel.org> # v3.5+
Cc: Fred Isaman <iisaman@netapp.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server sends us a target that looks like an outlier, but
is lower than the existing target, then respect it anyway.
However defer actually updating the generation counter until
we get a target that doesn't look like an outlier.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Most (all) NFS4ERR_BADSLOT errors are due to the client failing to
respect the server's sr_highest_slotid limit. This mainly happens
due to reordered RPC requests.
The way to handle it is simply to drop the slot that we're using,
and retry using the new highest_slotid limits.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Jian reported that the following sequence would leave "testfile" with
corrupt data:
# mount localhost:/export /mnt/nfs/ -o vers=3
# echo abc > /mnt/nfs/testfile; echo def >> /export/testfile; echo ghi >> /mnt/nfs/testfile
# cat -v /export/testfile
abc
^@^@^@^@ghi
While there's no locking involved here, the operations are serialized,
so CTO should prevent corruption.
The first write to the file is fine and writes 4 bytes. The file is then
extended on the server. When it's reopened a GETATTR is issued and the
size change is noticed. This causes NFS_INO_INVALID_DATA to be set on
the file. Because the file is opened for write only,
nfs_want_read_modify_write() returns 0 to nfs_write_begin().
nfs_updatepage then calls nfs_write_pageuptodate() to see if it should
extend the nfs_page to cover the whole page. NFS_INO_INVALID_DATA is
still set on the file at that point, but that flag is ignored and
nfs_pageuptodate erroneously extends the write to cover the whole page,
with the write done on the server side filled in with zeroes.
This patch just has that function check for NFS_INO_INVALID_DATA in
addition to NFS_INO_REVAL_PAGECACHE. This fixes the bug, but looking
over the code, I wonder if we might have a similar bug in
nfs_revalidate_size(). The difference between those two flags is very
subtle, so it seems like we ought to be checking for
NFS_INO_INVALID_DATA in most of the places that we look for
NFS_INO_REVAL_PAGECACHE.
I believe this is regression introduced by commit 8d197a568. The code
did check for NFS_INO_INVALID_DATA prior to that patch.
Original bug report is here:
https://bugzilla.redhat.com/show_bug.cgi?id=885743
Cc: <stable@vger.kernel.org> # 3.5+
Reported-by: Jian Li <jiali@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Commit 1f1ea6c "NFSv4: Fix buffer overflow checking in
__nfs4_get_acl_uncached" accidently dropped the checking for too small
result buffer length.
If someone uses getxattr on "system.nfs4_acl" on an NFSv4 mount
supporting ACLs, the ACL has not been cached and the buffer suplied is
too short, we still copy the complete ACL, resulting in kernel and user
space memory corruption.
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Look for sudden changes in the first and second derivatives in order
to eliminate outlier changes to target_highest_slotid (which are
due to out-of-order RPC replies).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, we see a lot of bouncing for the value of highest_used_slotid
due to the fact that slots are getting freed, instead of getting instantly
transmitted to the next waiting task.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to preserve the rpc_task priority for things like writebacks,
that may have differing levels of urgency.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All it does is pass its arguments through to another function. Let's
cut out the middleman...
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Privileged rpc calls are those that are run by the state recovery thread,
in cases where we're trying to recover the system after a server reboot
or a network partition. In those cases, we want to fence off all other
rpc calls (see nfs4_begin_drain_session()) so that they don't end up
using stateids or clientids that are in the process of being recovered.
Prior to this patch, we had to set up special callback functions in
order to declare an rpc call as being privileged.
By adding a new field to the sequence arguments, this patch simplifies
things considerably, and allows us to declare the rpc call as privileged
before it is run.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is more important to preserve the task priority behaviour, which ensures
that things like reclaim writes take precedence over background and kupdate
writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We shouldn't need to pass the 'cache_reply' parameter if we
initialise the sequence_args/sequence_res in the caller.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Nobody calls nfs4_setup_sequence or nfs41_setup_sequence without
also calling rpc_call_start() on success. This commit therefore
folds the rpc_call_start call into nfs41_setup_sequence().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no point in using nfs4_setup_sequence or nfs4_sequence_done
in pure NFSv4.1 functions. We already know that those have sessions...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server requests a lower target_highest_slotid, then ensure
that we ping it with at least one RPC call containing an
appropriate SEQUENCE op. This ensures that the server won't need to
send a recall callback in order to shrink the slot table.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This means that we end up statically allocating 128 bytes for the
bitmap on each slot table.
For a server that supports 1MB write and read I/O sizes this means
that we can completely fill the maximum 1GB TCP send/receive
windows.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_wait_clnt_recover and nfs4_client_recover_expired_lease are both
generic state related functions. As such, they belong in nfs4state.c,
and not nfs4proc.c
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Coalesce nfs4_check_drain_bc_complete and nfs4_check_drain_fc_complete
into a single function that can be called when the slot table is known
to be empty, then change nfs4_callback_free_slot() and nfs4_free_slot()
to use it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the NFSv4.1 session slot allocation fails due to an ENOMEM condition,
then set the task->tk_timeout to 1/4 second to ensure that we do retry
the slot allocation more quickly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RFC5661 requires us to make sure that the server knows we've updated
our slot table size by sending at least one SEQUENCE op containing the
new 'highest_slotid' value.
We can do so using the 'CHECK_LEASE' functionality of the state
manager.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The state manager no longer needs any special machinery to stop the
session flow and resize the slot table. It is all done on the fly by
the SEQUENCE op code now.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of an array of slots, use a singly linked list of slots that
can be dynamically appended to or shrunk.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow the server to control the size of the session slot table
by adjusting the value of sr_target_max_slots in the reply to the
SEQUENCE operation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server wants to leave us with only one slot, or it wants
to "shrink" our slot table to something larger than we have now,
then so be it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that the NFSv4.1 CB_RECALL_SLOT callback updates the slot table
target max slotid safely.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the server tells us that it is dynamically resizing the session
replay cache, we should reset the sequence number for those slots
that have been deallocated.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Dynamic slot allocation in NFSv4.1 depends on the client being able to
track the server's target value for the highest slotid in the
slot table. See the reference in Section 2.10.6.1 of RFC5661.
To avoid ordering problems in the case where 2 SEQUENCE replies contain
conflicting updates to this target value, we also introduce a generation
counter, to track whether or not an RPC containing a SEQUENCE operation
was launched before or after the last update.
Also rename the nfs4_slot_table target_max_slots field to
'target_highest_slotid' to avoid confusion with a slot
table size or number of slots.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We are leaking fattr and fhandle if we decide that dentry is not to
be invalidated, after all (e.g. happens to be a mountpoint). Just
free both before that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Change the argument to take the pointer to the slot, instead of
just the slotid.
We know that the new value of highest_used_slot must be less than
the current value. No need to scan the whole table.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up the NFSv4.1 slot allocation by replacing nfs_find_slot() with
a function nfs_alloc_slot() that returns a pointer to the nfs4_slot
instead of an offset into the slot table.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of doing slot table pointer gymnastics every time we want to
know which slot we're using.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the session pointer into the slot table, then have struct nfs4_slot
point to that slot table.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The slab cache in nfs_commit_mempool is wrong, and I think it is just a slip.
I tested it on a x86-32 machine, the size of nfs_write_header is 544, and
the size of nfs_commit_data is 408, so it works fine. It is also true that
sizeof(struct nfs_write_header) > sizeof(struct nfs_commit_data) on other
platforms in my opinoin. Just fix it.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
encode_exchange_id() uses more stack space than necessary, giving a compile
time warning. Reduce the size of the static buffer for implementation name.
Signed-off-by: Jim Rees <rees@umich.edu>
Reviewed-by: "Adamson, Dros" <Weston.Adamson@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We must always bump the clientid sequence number after a successful
call to CREATE_SESSION on the server. The result of
nfs4_verify_channel_attrs() is irrelevant to that requirement.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we're mounting a new filesystem, ensure that the session has negotiated
large enough request and reply sizes to match the wsize and rsize mount
arguments.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don't store the target request and response sizes in the same
variables used to store the server's replies to those targets.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We can't send a SEQUENCE op unless the session is OK, so it is pointless
to handle the CHECK_LEASE state before we've dealt with SESSION_RESET
and BIND_CONN_TO_SESSION.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If I mount an NFS v4.1 server to a single client multiple times and then
run xfstests over each mountpoint I usually get the client into a state
where recovery deadlocks. The server informs the client of a
cb_path_down sequence error, the client then does a
bind_connection_to_session and checks the status of the lease.
I found that bind_connection_to_session sets the NFS4_SESSION_DRAINING
flag on the client, but this flag is never unset before
nfs4_check_lease() reaches nfs4_proc_sequence(). This causes the client
to deadlock, halting all NFS activity to the server. nfs4_proc_sequence()
is only called by the state manager, so I can change it to run in privileged
mode to bypass the NFS4_SESSION_DRAINING check and avoid the deadlock.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
...and ensure that we set the return value for nfs_page_async_flush()
to zero! (Reported-by: Dros Adamson)
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Convert the ones that are not trivial to check into WARN_ON_ONCE().
Remove checks for things such as NFS2_MAXPATHLEN, which are trivially
done by the caller.
Add a comment to the case of nfs3_xdr_enc_setacl3args. What is being
done there is just wrong...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Return errno - not an NFS4ERR_. This worked because NFS4ERR_ACCESS == EACCES.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue
context. This avoids a deadlock where rpc_shutdown_client loops forever
in a workqueue kworker context, trying to kill all RPC tasks associated with
the client, while one or more of these tasks have already been assigned to the
same kworker (and will never run rpc_exit_task).
This approach is needed because RPC tasks that have already been assigned
to a kworker by queue_work cannot be canceled, as explained in the comment
for workqueue.c:insert_wq_barrier.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
[Trond: add module_get/put.]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since commit c7f404b ('vfs: new superblock methods to override
/proc/*/mount{s,info}'), nfs_path() is used to generate the mounted
device name reported back to userland.
nfs_path() always generates a trailing slash when the given dentry is
the root of an NFS mount, but userland may expect the original device
name to be returned verbatim (as it used to be). Make this
canonicalisation optional and change the callers accordingly.
[jrnieder@gmail.com: use flag instead of bool argument]
Reported-and-tested-by: Chris Hiestand <chiestand@salk.edu>
Reference: http://bugs.debian.org/669314
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In very busy v3 environment, rpc.mountd can respond to the NULL
procedure but not the MNT procedure in a timely manner causing
the MNT procedure to time out. The problem is the mount system
call returns EIO which causes the mount to fail, instead of
ETIMEDOUT, which would cause the mount to be retried.
This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to
the rpc_call_sync() call in nfs_mount() which causes
ETIMEDOUT to be returned on timed out connections.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
The new layout pointer in pnfs_find_alloc_layout() may be NULL because of
out of memory. we must do some check work, otherwise pnfs_free_layout_hdr()
will go wrong because it can not deal with a NULL pointer.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The DNS resolver's use of the sunrpc cache involves a 'ttl' number
(relative) rather that a timeout (absolute). This confused me when
I wrote
commit c5b29f885a
"sunrpc: use seconds since boot in expiry cache"
and I managed to break it. The effect is that any TTL is interpreted
as 0, and nothing useful gets into the cache.
This patch removes the use of get_expiry() - which really expects an
expiry time - and uses get_uint() instead, treating the int correctly
as a ttl.
This fixes a regression that has been present since 2.6.37, causing
certain NFS accesses in certain environments to incorrectly fail.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the state recovery machinery is triggered by the call to
nfs4_async_handle_error() then we can deadlock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
If we do not release the sequence id in cases where we fail to get a
session slot, then we can deadlock if we hit a recovery scenario.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
Currently, we will schedule session recovery and then return to the
caller of nfs4_handle_exception. This works for most cases, but causes
a hang on the following test case:
Client Server
------ ------
Open file over NFS v4.1
Write to file
Expire client
Try to lock file
The server will return NFS4ERR_BADSESSION, prompting the client to
schedule recovery. However, the client will continue placing lock
attempts and the open recovery never seems to be scheduled. The
simplest solution is to wait for session recovery to run before retrying
the lock.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
returning PTR_ERR(cb_info->task) just after we have set it to
NULL looks like a typo...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Move the call to pnfs_return_layout() to the read and write rpc_release()
callbacks, so that it gets called from nfsiod, which is a more appropriate
context.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is nothing to prevent another thread from dereferencing ds->ds_clp
during or after the call to nfs4_ds_disconnect(), and Oopsing due to the
resulting NULL pointer.
Instead, we should just rely on filelayout_mark_devid_invalid() to keep
us out of trouble by avoiding that deviceid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Pull nfsd update from J Bruce Fields:
"Another relatively quiet cycle. There was some progress on my
remaining 4.1 todo's, but a couple of them were just of the form
"check that we do X correctly", so didn't have much affect on the
code.
Other than that, a bunch of cleanup and some bugfixes (including an
annoying NFSv4.0 state leak and a busy-loop in the server that could
cause it to peg the CPU without making progress)."
* 'for-3.7' of git://linux-nfs.org/~bfields/linux: (46 commits)
UAPI: (Scripted) Disintegrate include/linux/sunrpc
UAPI: (Scripted) Disintegrate include/linux/nfsd
nfsd4: don't allow reclaims of expired clients
nfsd4: remove redundant callback probe
nfsd4: expire old client earlier
nfsd4: separate session allocation and initialization
nfsd4: clean up session allocation
nfsd4: minor free_session cleanup
nfsd4: new_conn_from_crses should only allocate
nfsd4: separate connection allocation and initialization
nfsd4: reject bad forechannel attrs earlier
nfsd4: enforce per-client sessions/no-sessions distinction
nfsd4: set cl_minorversion at create time
nfsd4: don't pin clientids to pseudoflavors
nfsd4: fix bind_conn_to_session xdr comment
nfsd4: cast readlink() bug argument
NFSD: pass null terminated buf to kstrtouint()
nfsd: remove duplicate init in nfsd4_cb_recall
nfsd4: eliminate redundant nfs4_free_stateid
fs/nfsd/nfs4idmap.c: adjust inconsistent IS_ERR and PTR_ERR
...
Merge branch 'bugfixes' of git://linux-nfs.org/~trondmy/nfs-2.6 into
for-3.7-incoming. Mainly needed for Bryan's "SUNRPC: Set alloc_slot for
backchannel tcp ops", without which the 4.1 server oopses.
Features include:
- Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1
Aside from the issues discussed at the LKS, distros are shipping
NFSv4.1 with all the trimmings.
- Fix fdatasync()/fsync() for the corner case of a server reboot.
- NFSv4 OPEN access fix: finally distinguish correctly between
open-for-read and open-for-execute permissions in all situations.
- Ensure that the TCP socket is closed when we're in CLOSE_WAIT
- More idmapper bugfixes
- Lots of pNFS bugfixes and cleanups to remove unnecessary state and
make the code easier to read.
- In cases where a pNFS read or write fails, allow the client to
resume trying layoutgets after two minutes of read/write-through-mds.
- More net namespace fixes to the NFSv4 callback code.
- More net namespace fixes to the NFSv3 locking code.
- More NFSv4 migration preparatory patches.
Including patches to detect network trunking in both NFSv4 and NFSv4.1
- pNFS block updates to optimise LAYOUTGET calls.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=uBk7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Features include:
- Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1
Aside from the issues discussed at the LKS, distros are shipping
NFSv4.1 with all the trimmings.
- Fix fdatasync()/fsync() for the corner case of a server reboot.
- NFSv4 OPEN access fix: finally distinguish correctly between
open-for-read and open-for-execute permissions in all situations.
- Ensure that the TCP socket is closed when we're in CLOSE_WAIT
- More idmapper bugfixes
- Lots of pNFS bugfixes and cleanups to remove unnecessary state and
make the code easier to read.
- In cases where a pNFS read or write fails, allow the client to
resume trying layoutgets after two minutes of read/write-
through-mds.
- More net namespace fixes to the NFSv4 callback code.
- More net namespace fixes to the NFSv3 locking code.
- More NFSv4 migration preparatory patches.
Including patches to detect network trunking in both NFSv4 and
NFSv4.1
- pNFS block updates to optimise LAYOUTGET calls."
* tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (113 commits)
pnfsblock: cleanup nfs4_blkdev_get
NFS41: send real read size in layoutget
NFS41: send real write size in layoutget
NFS: track direct IO left bytes
NFSv4.1: Cleanup ugliness in pnfs_layoutgets_blocked()
NFSv4.1: Ensure that the layout sequence id stays 'close' to the current
NFSv4.1: Deal with seqid wraparound in the pNFS return-on-close code
NFSv4 set open access operation call flag in nfs4_init_opendata_res
NFSv4.1: Remove the dependency on CONFIG_EXPERIMENTAL
NFSv4 reduce attribute requests for open reclaim
NFSv4: nfs4_open_done first must check that GETATTR decoded a file type
NFSv4.1: Deal with wraparound when updating the layout "barrier" seqid
NFSv4.1: Deal with wraparound issues when updating the layout stateid
NFSv4.1: Always set the layout stateid if this is the first layoutget
NFSv4.1: Fix another refcount issue in pnfs_find_alloc_layout
NFSv4: don't put ACCESS in OPEN compound if O_EXCL
NFSv4: don't check MAY_WRITE access bit in OPEN
NFS: Set key construction data for the legacy upcall
NFSv4.1: don't do two EXCHANGE_IDs on mount
NFS: nfs41_walk_client_list(): re-lock before iterating
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=etoL
-----END PGP SIGNATURE-----
nfs: disintegrate UAPI for nfs
This is to complete part of the Userspace API (UAPI) disintegration for which
the preparatory patches were pulled recently. After these patches, userspace
headers will be segregated into:
include/uapi/linux/.../foo.h
for the userspace interface stuff, and:
include/linux/.../foo.h
for the strictly kernel internal stuff.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().
Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.
Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com> #arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is not needed at all and it is messing with return values...
Reported-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For buffer read, use offst-to-isize.
For direct read, use dreq->bytes_left.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-isize as layoutget length.
For direct write, both block layout and object layout use dreq->bytes_left.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Split it into two functions, one which checks if layoutgets are blocked,
and one which checks if the layout stateid has expired.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clamp the layout barrier sequence id to the current sequence id
minus the maximum number of outstanding layoutget requests.
Also ensure that we correctly initialise lo->plh_barrier if there are
no layout segments associated to this layout header.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_open_recover_helper zeros the nfs4_opendata result structures, removing
the result access_request information which leads to an XDR decode error.
Move the setting of the result access_request field to nfs4_init_opendata_res
which sets all the other required nfs4_opendata result fields and is shared
between the open and recover open paths.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
CONFIG_EXPERIMENTAL is deprecated and, regardless of that, this code
is being enabled in most newer distributions.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Pull vfs update from Al Viro:
- big one - consolidation of descriptor-related logics; almost all of
that is moved to fs/file.c
(BTW, I'm seriously tempted to rename the result to fd.c. As it is,
we have a situation when file_table.c is about handling of struct
file and file.c is about handling of descriptor tables; the reasons
are historical - file_table.c used to be about a static array of
struct file we used to have way back).
A lot of stray ends got cleaned up and converted to saner primitives,
disgusting mess in android/binder.c is still disgusting, but at least
doesn't poke so much in descriptor table guts anymore. A bunch of
relatively minor races got fixed in process, plus an ext4 struct file
leak.
- related thing - fget_light() partially unuglified; see fdget() in
there (and yes, it generates the code as good as we used to have).
- also related - bits of Cyrill's procfs stuff that got entangled into
that work; _not_ all of it, just the initial move to fs/proc/fd.c and
switch of fdinfo to seq_file.
- Alex's fs/coredump.c spiltoff - the same story, had been easier to
take that commit than mess with conflicts. The rest is a separate
pile, this was just a mechanical code movement.
- a few misc patches all over the place. Not all for this cycle,
there'll be more (and quite a few currently sit in akpm's tree)."
Fix up trivial conflicts in the android binder driver, and some fairly
simple conflicts due to two different changes to the sock_alloc_file()
interface ("take descriptor handling from sock_alloc_file() to callers"
vs "net: Providing protocol type via system.sockprotoname xattr of
/proc/PID/fd entries" adding a dentry name to the socket)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits)
MAX_LFS_FILESIZE should be a loff_t
compat: fs: Generic compat_sys_sendfile implementation
fs: push rcu_barrier() from deactivate_locked_super() to filesystems
btrfs: reada_extent doesn't need kref for refcount
coredump: move core dump functionality into its own file
coredump: prevent double-free on an error path in core dumper
usb/gadget: fix misannotations
fcntl: fix misannotations
ceph: don't abuse d_delete() on failure exits
hypfs: ->d_parent is never NULL or negative
vfs: delete surplus inode NULL check
switch simple cases of fget_light to fdget
new helpers: fdget()/fdput()
switch o2hb_region_dev_write() to fget_light()
proc_map_files_readdir(): don't bother with grabbing files
make get_file() return its argument
vhost_set_vring(): turn pollstart/pollstop into bool
switch prctl_set_mm_exe_file() to fget_light()
switch xfs_find_handle() to fget_light()
switch xfs_swapext() to fget_light()
...
There's no reason to call rcu_barrier() on every
deactivate_locked_super(). We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.
Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths. E.g. on my machine exit_group() of a last process in IPC
namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We currently make no distinction in attribute requests between normal OPENs
and OPEN with CLAIM_PREVIOUS. This offers more possibility of failures in
the GETATTR response which foils OPEN reclaim attempts.
Reduce the requested attributes to the bare minimum needed to update the
reclaim open stateid and split nfs4_opendata_to_nfs4_state processing
accordingly.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don't put an ACCESS op in OPEN compound if O_EXCL, because ACCESS
will return permission denied for all bits until close.
Fixes a regression due to commit 6168f62c (NFSv4: Add ACCESS operation to
OPEN compound)
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don't check MAY_WRITE as a newly created file may not have write mode bits,
but POSIX allows the creating process to write regardless.
This is ok because NFSv4 OPEN ops handle write permissions correctly -
the ACCESS in the OPEN compound is to differentiate READ v EXEC permissions.
Fixes a regression due to commit 6168f62c (NFSv4: Add ACCESS operation to
OPEN compound)
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This prevents a null pointer dereference when
nfs_idmap_complete_pipe_upcall_locked() calls complete_request_key().
Fixes a regression caused by commit 0cac12023 (NFSv4: Ensure that
idmap_pipe_downcall sanity-checks the downcall data).
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since the addition of NFSv4 server trunking detection the mount context
calls nfs4_proc_exchange_id then schedules the state manager, which also
calls nfs4_proc_exchange_id. Setting the NFS4CLNT_LEASE_CONFIRM bit
makes the state manager skip the unneeded EXCHANGE_ID and continue on
with session creation.
Reported-by: Jorge Mora <mora@netapp.com>
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use keyring_alloc() to create special keyrings now that it has a permissions
parameter rather than using key_alloc() + key_instantiate_and_link().
Also document and export keyring_alloc() so that modules can use it too.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.
The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.
The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.
Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.
Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.
While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.
Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.
After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."
Fix up some fairly trivial conflicts in netfilter uid/git logging code.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
Sparse identified an execution path in nfs41_walk_client_list()
where the nfs_client_lock is not re-acquired before taking the next
loop iteration.
fs/nfs/nfs4client.c:437:9: sparse: context imbalance in
'nfs41_walk_client_list' - different lock contexts for basic block
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the layoutget call returns a stateid error, we want to invalidate the
layout stateid, and/or recover the open stateid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Sparse warning:
fs/nfs/nfs4getroot.c:11:5: warning: symbol 'nfs4_get_rootfh' was not declared.
Should it be static?
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Sparse warnings:
fs/nfs/nfs4sysctl.c:56:5: warning: symbol 'nfs4_register_sysctl' was not
declared. Should it be static?
fs/nfs/nfs4sysctl.c:64:6: warning: symbol 'nfs4_unregister_sysctl' was not
declared. Should it be static?
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Sparse warning:
fs/nfs/super.c:2517:15: warning: symbol 'nfs_xdev_mount' was not declared.
Should it be static?
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Sparse warning:
fs/nfs/super.c:2638:16: sparse: symbol 'nfs_callback_tcpport' was not
declared. Should it be static?
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We should reclaim reboot state when the clientid is stale.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The current spaghetti code confuses some versions of gcc (and just
looks ugly as hell)! Clean up...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There are some unnecessary semicolons in function find_nfs_version. Just remove them.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Using list_move_tail() instead of list_del() + list_add_tail().
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For DIO writes, if it is not blocksize aligned, we need to do
internal serialization. It may slow down writers anyway. So we
just bail them out and resend to MDS.
Cc: stable <stable@vger.kernel.org> [since v3.4]
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For DIO read, if it is not sector aligned, we should reject it
and resend via MDS. Otherwise there might be data corruption.
Also teach bl_read_pagelist to handle partial page reads for DIO.
Cc: stable <stable@vger.kernel.org> [since v3.4]
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If applications use flock to protect its write range, generic NFS
will not do read-modify-write cycle at page cache level. Therefore
LD should know how to handle non-sector aligned writes. Otherwise
there will be data corruption.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This reverts commit 159e0561e3, in favor
of a more complete fix to the alignment issue.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
After commit e38eb650 (NFS: set_pnfs_layoutdriver() from
nfs4_proc_fsinfo()), set_pnfs_layoutdriver() is called inside
nfs4_proc_fsinfo(), but pnfs_blksize is not set. It causes setting
blocklayoutdriver failure and pnfsblock mount failure.
Cc: stable <stable@vger.kernel.org> [since v3.5]
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pnfs_within_mdsthreshold() is called inside pg_init. We need to set
read_io/write_io before that. Otherwise we fail pnfs_within_mdsthreshold()
and IO goes to MDS.
A simple test case:
dd if=foo of=/mnt/pnfs/bar bs=10M count=1 oflag=direct
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
An optional boot parameter is introduced to allow client
administrators to specify a string that the Linux NFS client can
insert into its nfs_client_id4 id string, to make it both more
globally unique, and to ensure that it doesn't change even if the
client's nodename changes.
If this boot parameter is not specified, the client's nodename is
used, as before.
Client installation procedures can create a unique string (typically,
a UUID) which remains unchanged during the lifetime of that client
instance. This works just like creating a UUID for the label of the
system's root and boot volumes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
"Server trunking" is a fancy named for a multi-homed NFS server.
Trunking might occur if a client sends NFS requests for a single
workload to multiple network interfaces on the same server. There
are some implications for NFSv4 state management that make it useful
for a client to know if a single NFSv4 server instance is
multi-homed. (Note this is only a consideration for NFSv4, not for
legacy versions of NFS, which are stateless).
If a client cares about server trunking, no NFSv4 operations can
proceed until that client determines who it is talking to. Thus
server IP trunking discovery must be done when the client first
encounters an unfamiliar server IP address.
The nfs_get_client() function walks the nfs_client_list and matches
on server IP address. The outcome of that walk tells us immediately
if we have an unfamiliar server IP address. It invokes
nfs_init_client() in this case. Thus, nfs4_init_client() is a good
spot to perform trunking discovery.
Discovery requires a client to establish a fresh client ID, so our
client will now send SETCLIENTID or EXCHANGE_ID as the first NFS
operation after a successful ping, rather than waiting for an
application to perform an operation that requires NFSv4 state.
The exact process for detecting trunking is different for NFSv4.0 and
NFSv4.1, so a minorversion-specific init_client callout method is
introduced.
CLID_INUSE recovery is important for the trunking discovery process.
CLID_INUSE is a sign the server recognizes the client's nfs_client_id4
id string, but the client is using the wrong principal this time for
the SETCLIENTID operation. The SETCLIENTID must be retried with a
series of different principals until one works, and then the rest of
trunking discovery can proceed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, when identifying itself to NFS servers, the Linux NFS
client uses a unique nfs_client_id4.id string for each server IP
address it talks with. For example, when client A talks to server X,
the client identifies itself using a string like "AX". The
requirements for these strings are specified in detail by RFC 3530
(and bis).
This form of client identification presents a problem for Transparent
State Migration. When client A's state on server X is migrated to
server Y, it continues to be associated with string "AX." But,
according to the rules of client string construction above, client
A will present string "AY" when communicating with server Y.
Server Y thus has no way to know that client A should be associated
with the state migrated from server X. "AX" is all but abandoned,
interfering with establishing fresh state for client A on server Y.
To support transparent state migration, then, NFSv4.0 clients must
instead use the same nfs_client_id4.id string to identify themselves
to every NFS server; something like "A".
Now a client identifies itself as "A" to server X. When a file
system on server X transitions to server Y, and client A identifies
itself as "A" to server Y, Y will know immediately that the state
associated with "A," whether it is native or migrated, is owned by
the client, and can merge both into a single lease.
As a pre-requisite to adding support for NFSv4 migration to the Linux
NFS client, this patch changes the way Linux identifies itself to NFS
servers via the SETCLIENTID (NFSv4 minor version 0) and EXCHANGE_ID
(NFSv4 minor version 1) operations.
In addition to removing the server's IP address from nfs_client_id4,
the Linux NFS client will also no longer use its own source IP address
as part of the nfs_client_id4 string. On multi-homed clients, the
value of this address depends on the address family and network
routing used to contact the server, thus it can be different for each
server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, the Linux client uses a unique nfs_client_id4.id string
when identifying itself to distinct NFS servers.
To support transparent state migration, the Linux client will have to
use the same nfs_client_id4 string for all servers it communicates
with (also known as the "uniform client string" approach). Otherwise
NFS servers can not recognize that open and lock state need to be
merged after a file system transition.
Unfortunately, there are some NFSv4.0 servers currently in the field
that do not tolerate the uniform client string approach.
Thus, by default, our NFSv4.0 mounts will continue to use the current
approach, and we introduce a mount option that switches them to use
the uniform model. Client administrators must identify which servers
can be mounted with this option. Eventually most NFSv4.0 servers will
be able to handle the uniform approach, and we can change the default.
The first mount of a server controls the behavior for all subsequent
mounts for the lifetime of that set of mounts of that server. After
the last mount of that server is gone, the client erases the data
structure that tracks the lease. A subsequent lease may then honor
a different "migration" setting.
This patch adds only the infrastructure for parsing the new mount
option. Support for uniform client strings is added in a subsequent
patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
An ULP is supposed to be able to replace a GSS rpc_auth object with
another GSS rpc_auth object using rpcauth_create(). However,
rpcauth_create() in 3.5 reliably fails with -EEXIST in this case.
This is because when gss_create() attempts to create the upcall pipes,
sometimes they are already there. For example if a pipe FS mount
event occurs, or a previous GSS flavor was in use for this rpc_clnt.
It turns out that's not the only problem here. While working on a
fix for the above problem, we noticed that replacing an rpc_clnt's
rpc_auth is not safe, since dereferencing the cl_auth field is not
protected in any way.
So we're deprecating the ability of rpcauth_create() to switch an
rpc_clnt's security flavor during normal operation. Instead, let's
add a fresh API that clones an rpc_clnt and gives the clone a new
flavor before it's used.
This makes immediate use of the new __rpc_clone_client() helper.
This can be used in a similar fashion to rpcauth_create() when a
client is hunting for the correct security flavor. Instead of
replacing an rpc_clnt's security flavor in a loop, the ULP replaces
the whole rpc_clnt.
To fix the -EEXIST problem, any ULP logic that relies on replacing
an rpc_clnt's rpc_auth with rpcauth_create() must be changed to use
this API instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the state manager thread is not actually able to fully recover from
some situation, it wakes up waiters, who kick off a new state manager
thread. Quite often the fresh invocation of the state manager is just
as successful.
This results in a livelock as the client dumps thousands of NFS
requests a second on the network in a vain attempt to recover. Not
very friendly.
To mitigate this situation, add a delay in the state manager after
an unhandled error, so that the client sends just a few requests
every second in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
fs/nfs/super.c: In function ‘nfs_compare_remount_data’:
fs/nfs/super.c:2042:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2043:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2044:20: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2046:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2047:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2048:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2049:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2050:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
Seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch also introduces refcount-aware nfs_callback_down_net() wrapper for
svc_shutdown_net().
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Usage coutner now increased only is the service was started sccessfully.
Even if service is running already, then goto is not required anymore, because
service creation and start will be skipped.
With this patch code looks clearer.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is just a code move, which from my POW makes code looks better.
I.e. now on start we have 3 different stages:
1) Service creation.
2) Service per-net data allocation.
3) Service start.
Patch also renames goto label "out_err:" into "err_start:" to reflect new
changes.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need to assign transports backchannel server explicitly in
nfs41_callback_up() - there is nfs_callback_bc_serv() function for this.
By using it, nfs4_callback_up() and nfs41_callback_up() can be called without
transport argument.
Note: service have to be passed to nfs_callback_bc_serv() instead of callback,
since callback link can be uninitialized.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
v4:
1) Callback transport creation routine selection by version simlified.
This new function in now called before nfs_minorversion_callback_svc_setup()).
Also few small changes:
1) current network namespace in nfs_callback_up() was replaced by transport net.
2) svc_shutdown_net() was moved prior to callback usage counter decrement
(because in case of per-net data allocation faulure svc_shutdown_net() have to
be skipped).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This function creates service if it's not exist, or increase usage counter of
the existent, and returns pointer to it.
Usage counter will be droppepd by svc_destroy() later in nfs_callback_up().
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The OPEN operation has no way to differentiate an open for read and an
open for execution - both look like read to the server. This allowed
users to read files that didn't have READ access but did have EXEC access,
which is obviously wrong.
This patch adds an ACCESS call to the OPEN compound to handle the
difference between OPENs for reading and execution. Since we're going
through the trouble of calling ACCESS, we check all possible access bits
and cache the results hopefully avoiding an ACCESS call in the future.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This will allocate memory that has already been zeroed, allowing us to
remove the memset later on.
Signed-off-by: Bryan Schumaker <bjchuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I put the client into an open recovery loop by:
Client: Open file
read half
Server: Expire client (echo 0 > /sys/kernel/debug/nfsd/forget_clients)
Client: Drop vm cache (echo 3 > /proc/sys/vm/drop_caches)
finish reading file
This causes a loop because the client never updates the nfs4_state after
discovering that the delegation is invalid. This means it will keep
trying to read using the bad delegation rather than attempting to re-open
the file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
CC: stable@vger.kernel.org [3.4+]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we are reading through a delegation, and the delegation is OK then
state->stateid will still point to a delegation stateid and not an open
stateid.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
Currently it does not do so if the RPC call failed to start. Fix is to
move the decrement of plh_block_lgets into nfs4_layoutreturn_release.
Also remove a redundant test of task->tk_status in nfs4_layoutreturn_done:
if lrp->res.lrs_present is set, then obviously the RPC call succeeded.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Failure of the layoutreturn allocation fails is not a good reason to
mark the pnfs_layout_hdr as having failed a layoutget or i/o. Just
exit cleanly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It serves no purpose that the test for whether or not we have valid
layout segments doesn't already serve.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Once all the affected layout segments have been freed up, clear the
NFS_LAYOUT_BULK_RECALL flag so that we can reuse the pnfs_layout_hdr
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We already have a mechanism for blocking LAYOUTGET by means of the
plh_block_lgets counter. The only "service" that NFS_LAYOUT_DESTROYED
provides at this point is to block layoutget once the layout segment
list is empty, which basically means that you have to wait until
the pnfs_layout_hdr is destroyed before you can do pNFS on that file
again.
This patch enables the reuse of the pnfs_layout_hdr if the layout
segment list is empty.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that the reference count for pnfs_layout_hdr reverts to the
original value after a call to pnfs_layout_remove_lseg().
Note that the caller is expected to hold a reference to the struct
pnfs_layout_hdr.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no longer a need to use pnfs_free_lseg_list(). Just call
pnfs_free_lseg() directly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the code into pnfs_free_layout_hdr(), and add checks to
get_layout_by_fh_locked to ensure that they don't reference a layout
that is being freed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
None of the existing pNFS layout drivers seem to require the inode
to be locked while they free the layout header.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Each layout segment already holds a reference to the pnfs_layout_hdr,
so there is no need to hold an extra reference that is released once
the last layout segment is freed.
Ensure that pnfs_find_alloc_layout() always returns a reference
to the pnfs_layout_hdr, which will be matched by the final call to
pnfs_put_layout_hdr() in pnfs_update_layout().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The latter name is more descriptive of the actual function.
Also rename pnfs_insert_layout to pnfs_layout_insert_lseg.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of resetting the inode MDS threshold counters when we mark
the layout for destruction, do it as part of freeing the layout.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In all cases where we set NFS_LAYOUT_INVALID, we also set NFS_LAYOUT_DESTROYED.
Furthermore, in all cases where we test for NFS_LAYOUT_INVALID, we should
also be testing for NFS_LAYOUT_DESTROYED, since the latter means that
we hold no valid layout segments.
Ergo the two are redundant.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we sleep after dropping the inode->i_lock, then we are no longer
atomic with respect to the rpc_wake_up() call in pnfs_layout_remove_lseg().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If pnfs_layout_io_test_failed() authorises a retry of the failed layoutgets,
we should clear the existing layout segments so that we start afresh. Do
this in pnfs_layout_io_set_failed().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to cache the pnfs_layout_hdr after a layoutget or i/o
failure so that pnfs_update_layout() can find it and know when
it is time to retry.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we exit after the call to pnfs_find_alloc_layout(), we have to ensure
that we put the struct pnfs_layout_hdr.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In cases where the pNFS data server is just temporarily out of service,
we want to mark it as such, and then try again later. Typically that will
be in cases of network connection errors etc.
This patch allows us to mark the devices as being "unavailable" for such
transient errors, and will make them available for retries after a
2 minute timeout period.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we had to fall back to read/write through MDS, then assume that we should
retry pNFS after a suitable timeout period.
The following patch sets a timeout of 2 minutes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Dereferencing nfsi->layout in order to read plh_flags without holding
a spin lock is bug prone. Furthermore, the dprintk() tells you nothing
about whether or not the call succeeded.
Replace it with something that tells you about whether or not a valid
layout segment was returned for the inode in question.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we do return errors from nfs4_proc_layoutget() and that we
don't mark the layout as having failed if the error was due to a
signal or resource problem on the client side.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is to ensure that we don't clear the NFS_CONTEXT_RESEND_WRITES
flag while there are still writes that haven't been resent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server reboots before it can commit the unstable writes to disk,
then nfs_commit_release_pages() will detect this when it compares the
verifier returned by COMMIT to the one returned by WRITE. When this
happens, the client needs to resend those writes in order to guarantee
that they make it to stable storage.
This patch adds a signalling mechanism to notify fsync() that it
needs to retry all writes before it can exit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to be able to pass on the information that the page was not
dirtied under a lock. Instead of adding a flag parameter, do this
by passing a pointer to a 'struct nfs_lock_owner' that may be NULL.
Also reuse this structure in struct nfs_lock_context to carry the
fl_owner_t and pid_t.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to be able to distinguish between allocation failures, and
the case where the lock context is not needed (because there are no
locks).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the idmapper upcall data to verify that the legacy idmapper daemon
is indeed responding to an upcall that we sent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Replace the BUG_ON(idmap->idmap_key_cons != NULL) with a
WARN_ON_ONCE(). Then get rid of the ACCESS_ONCE(idmap->idmap_key_cons).
Then add helper functions for starting, finishing and aborting the
legacy upcall.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
The use of ACCESS_ONCE() is wrong, since the various routines that set/clear
idmap->idmap_key_cons should be strictly ordered w.r.t. each other, and
the idmap->idmap_mutex ensures that only one thread at a time may be in
an upcall situation.
Also replace the BUG_ON()s with WARN_ON_ONCE() where appropriate.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In nfs4_create_sec_client, 'flavor' can hold a negative error
code (returned from nfs4_negotiate_security), even though it
is an 'enum' and hence unsigned.
The code is careful to cast it to an (int) before testing if it
is negative, however it doesn't cast to an (int) before calling
ERR_PTR.
On a machine where "void*" is larger than "int", this results in
the unsigned equivalent of -1 (e.g. 0xffffffff) being converted
to a pointer. Subsequent code determines that this is not
negative, and so dereferences it with predictable results.
So: cast 'flavor' to a (signed) int before passing to ERR_PTR.
cc: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In case of error, the function rpcauth_create() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the return value
check should be replaced with IS_ERR().
dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
- Pass the user namespace the uid and gid values in the xattr are stored
in into posix_acl_from_xattr.
- Pass the user namespace kuid and kgid values should be converted into
when storing uid and gid values in an xattr in posix_acl_to_xattr.
- Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to
pass in &init_user_ns.
In the short term this change is not strictly needed but it makes the
code clearer. In the longer term this change is necessary to be able to
mount filesystems outside of the initial user namespace that natively
store posix acls in the linux xattr format.
Cc: Theodore Tso <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
We need to ensure that if the call to filemap_write_and_wait_range()
fails, then we report that error back to the application.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last
decode_* call must have succeeded.
Cc: stable@vger.kernel.org
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Pass the checks made by decode_getacl back to __nfs4_get_acl_uncached
so that it knows if the acl has been truncated.
The current overflow checking is broken, resulting in Oopses on
user-triggered nfs4_getfacl calls, and is opaque to the point
where several attempts at fixing it have failed.
This patch tries to clean up the code in addition to fixing the
Oopses by ensuring that the overflow checks are performed in
a single place (decode_getacl). If the overflow check failed,
we will still be able to report the acl length, but at least
we will no longer attempt to cache the acl or copy the
truncated contents to user space.
Reported-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Sachin Prabhu <sprabhu@redhat.com>
Ensure that the user supplied buffer size doesn't cause us to overflow
the 'pages' array.
Also fix up some confusion between the use of PAGE_SIZE and
PAGE_CACHE_SIZE when calculating buffer sizes. We're not using
the page cache for anything here.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Apparently, am-utils is still using the legacy binary mountdata interface,
and is having trouble parsing /proc/mounts due to the 'port=' field being
incorrectly set.
The following patch should fix up the regression.
Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
Trond Myklebust