During ftrace init, linux will replace all function prologues
(call_mcout) with nops, but it need flush_dcache and
invalidate_icache to make it work. So flush_cache functions
couldn't be nested called by ftrace framework.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The implementation are not only used by TCM but also used by sram on
SOC bus. It follow existed linux tcm software interface, so that old
tcm application codes could be re-used directly.
Software interface list in asm/tcm.h:
- Variables/Const: __tcmdata, __tcmconst
- Functions: __tcmfunc, __tcmlocalfunc
- Malloc/Free: tcm_alloc, tcm_free
In linux menuconfig:
- Choose a TCM contain instrctions + data or separated in ITCM/DTCM.
- Determine TCM_BASE (DTCM_BASE) in phyiscal address.
- Determine size of TCM or ITCM(DTCM) in page counts.
Here is hello tcm example from Documentation/arm/tcm.rst which could
be directly used:
/* Uninitialized data */
static u32 __tcmdata tcmvar;
/* Initialized data */
static u32 __tcmdata tcmassigned = 0x2BADBABEU;
/* Constant */
static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
static void __tcmlocalfunc tcm_to_tcm(void)
{
int i;
for (i = 0; i < 100; i++)
tcmvar ++;
}
static void __tcmfunc hello_tcm(void)
{
/* Some abstract code that runs in ITCM */
int i;
for (i = 0; i < 100; i++) {
tcmvar ++;
}
tcm_to_tcm();
}
static void __init test_tcm(void)
{
u32 *tcmem;
int i;
hello_tcm();
printk("Hello TCM executed from ITCM RAM\n");
printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
tcmvar = 0xDEADBEEFU;
printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
/* Allocate some TCM memory from the pool */
tcmem = tcm_alloc(20);
if (tcmem) {
printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
tcmem[0] = 0xDEADBEEFU;
tcmem[1] = 0x2BADBABEU;
tcmem[2] = 0xCAFEBABEU;
tcmem[3] = 0xDEADBEEFU;
tcmem[4] = 0x2BADBABEU;
for (i = 0; i < 5; i++)
printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
tcm_free(tcmem, 20);
}
}
TODO:
- Separate fixup mapping from highmem
- Support abiv1
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Use linux generic asid/vmid algorithm to implement csky
switch_mm function. The algorithm is from arm and it could
work with SMP system. It'll help reduce tlb flush for
switch_mm in task/vm switch.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
This patch only contains asid help code from arm for next patch to
use.
The asid allocator use five level check to reduce the cost of
switch_mm.
1. Check if the asid version is the same (it's general)
2. Check reserved_asid which is set in rollover flush_context()
and key point is to keep the same bit position with the current
asid version instead of input version.
3. Check if the position of bitmap is free then it could be set &
used directly.
4. find_next_zero_bit() (a little performance cost)
5. flush_context (this is the worst cost with increase current asid
version)
Check is level by level and cost is also higher with the next level.
The reserved_asid and bitmap mechanism prevent unnecessary
find_next_zero_bit().
The atomic 64 bit asid is also suitable for 32-bit system and it
won't cost a lot in 1th 2th 3th level check.
The operation of set/clear mm_cpumask was removed in arm64 compared to
arm32. It seems no side effect on current arm64 system, but from
software meaning it's wrong. Although csky also needn't it, we add it
back for csky.
The asid_per_ctxt is no use for csky and it reserves the lowest bits for
other use, maybe: trust zone ? Ok, just keep it in csky copy.
Seems it also could be used by other archs and it's worth to move asid
code to generic in future.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Julien Grall <julien.grall@arm.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guo Ren