Commit Graph

733 Commits

Author SHA1 Message Date
Steffen Maier 8b3bdd99c0 scsi: zfcp: Report port fc_security as unknown early during remote cable pull
On remote cable pull, a zfcp_port keeps its status and only gets
ZFCP_STATUS_PORT_LINK_TEST added. Only after an ADISC timeout, we would
actually start port recovery and remove ZFCP_STATUS_COMMON_UNBLOCKED which
zfcp_sysfs_port_fc_security_show() detected and reported as "unknown"
instead of the old and possibly stale zfcp_port->connection_info.

Add check for ZFCP_STATUS_PORT_LINK_TEST for timely "unknown" report.

Link: https://lore.kernel.org/r/20210702160922.2667874-1-maier@linux.ibm.com
Fixes: a17c784600 ("scsi: zfcp: report FC Endpoint Security in sysfs")
Cc: <stable@vger.kernel.org> #5.7+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12 21:51:50 -04:00
Hannes Reinecke f2b1e9c6f8 scsi: core: Introduce scsi_build_sense()
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.

Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Linus Torvalds d72cd4ad41 SCSI misc on 20210428
This series consists of the usual driver updates (ufs, target, tcmu,
 smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).  The major core
 change is using a sbitmap instead of an atomic for queue tracking.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYInvqCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYh2AP0SgqqL
 WYZRT2oiyBOKD28v+ceOSiXvgjPlqABwVMC0BAEAn29/wNCxyvzZ1k/b0iPJ4M+S
 klkSxLzXKQLzJBgdK5w=
 =p5B/
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, target, tcmu,
  smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).

  The major core change is using a sbitmap instead of an atomic for
  queue tracking"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
  scsi: target: tcm_fc: Fix a kernel-doc header
  scsi: target: Shorten ALUA error messages
  scsi: target: Fix two format specifiers
  scsi: target: Compare explicitly with SAM_STAT_GOOD
  scsi: sd: Introduce a new local variable in sd_check_events()
  scsi: dc395x: Open-code status_byte(u8) calls
  scsi: 53c700: Open-code status_byte(u8) calls
  scsi: smartpqi: Remove unused functions
  scsi: qla4xxx: Remove an unused function
  scsi: myrs: Remove unused functions
  scsi: myrb: Remove unused functions
  scsi: mpt3sas: Fix two kernel-doc headers
  scsi: fcoe: Suppress a compiler warning
  scsi: libfc: Fix a format specifier
  scsi: aacraid: Remove an unused function
  scsi: core: Introduce enum scsi_disposition
  scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
  scsi: core: Rename scsi_softirq_done() into scsi_complete()
  scsi: core: Remove an incorrect comment
  scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
  ...
2021-04-28 17:22:10 -07:00
Julian Wiedmann b3f0a1ee9e scsi: zfcp: Lift Request Queue tasklet & timer from qdio
The qdio layer currently provides its own infrastructure to scan for
Request Queue completions & to report them to the device driver.  This
comes with several drawbacks - having an async tasklet & timer construct in
qdio introduces additional lifetime complexity, and makes it harder to
integrate them with the rest of the device driver. The timeouts are also
currently hard-coded, and can't be tweaked without affecting other qdio
drivers (ie. qeth).

But due to recent enhancements to the qdio layer, zfcp can actually take
full control of the Request Queue completion processing. It merely needs to
opt-out from the qdio layer mechanisms by setting the scan_threshold to 0,
and then use qdio_inspect_queue() to scan for completions.

So re-implement the tasklet & timer mechanism in zfcp, while initially
copying the scan conditions from qdio's handle_outbound() and
qdio_outbound_tasklet(). One minor behavioural change is that
zfcp_qdio_send() will unconditionally reduce the timeout to 1 HZ, rather
than leaving it at 10 Hz if it was last armed by the tasklet. This just
makes things more consistent. Also note that we can drop a lot of the
accumulated cruft in qdio_outbound_tasklet(), as zfcp doesn't even use PCI
interrupt requests any longer.

This also slightly touches the Response Queue processing, as
qdio_get_next_buffers() will no longer implicitly scan for Request Queue
completions. So complete the migration to qdio_inspect_queue() here as well
and make the tasklet_schedule() visible.

Link: https://lore.kernel.org/r/018d3ddd029f8d6ac00cf4184880288c637c4fd1.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:40 -04:00
Qinglang Miao be46e39ae3 scsi: zfcp: Move the position of put_device()
Place the put_device() call after device_unregister() in both
zfcp_unit_remove() and zfcp_sysfs_port_remove_store() to make it more
natural. put_device() ought to be the last time we touch the object in both
functions.

Add comments after put_device() to make code clearer.

Link: https://lore.kernel.org/r/0a568c7733ba0f1dde28b0c663b90270d44dd540.1618417667.git.bblock@linux.ibm.com
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:40 -04:00
Julian Wiedmann 20540a5645 scsi: zfcp: Clean up sysfs code for SFP diagnostics
The error path from zfcp_adapter_enqueue() no longer attempts to remove the
diagnostics attributes if they haven't been created yet.

So remove the manual 'sysfs_established' guard for this case, and use
device_add_groups() to add all adapter-related sysfs attributes in one go.

Link: https://lore.kernel.org/r/37a97537f675d643006271f37723c346189b6eec.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:40 -04:00
Julian Wiedmann ab1fa88062 scsi: zfcp: Fix sysfs roll-back on error in zfcp_adapter_enqueue()
When zfcp_adapter_enqueue() fails to create the zfcp_sysfs_adapter_attrs
group, it calls zfcp_adapter_unregister() to tear down the adapter state
again. This then unconditionally attempts to remove the
zfcp_sysfs_adapter_attrs group, resulting in a "group not found" WARN from
sysfs code.

Avoid this by copying most of zfcp_adapter_unregister() into the error
path, allowing for more fine-granular roll-back. Then skip the sysfs
tear-down steps if we haven't progressed this far in the initialization.

Link: https://lore.kernel.org/r/790922cc3af075795fff9a4b787e6bda19bdb3be.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:39 -04:00
Yevhen Viktorov 8824db894d scsi: zfcp: Fix indentation coding style issue
Code indentation should use tabs where possible.

Link: https://lore.kernel.org/r/e8a15a2f3d64e2e76a214647cfd4fe23d370b165.1618417667.git.bblock@linux.ibm.com
Signed-off-by: Yevhen Viktorov <yevhen.viktorov@virginmedia.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:39 -04:00
Julian Wiedmann 91cf21ec6d scsi: zfcp: Remove unneeded INIT_LIST_HEAD() for FSF requests
INIT_LIST_HEAD() is only needed for actual list heads, while req->list is
used as a list entry.

Note that when the error path in zfcp_fsf_req_send() removes the request
from the adapter's list of pending requests, it actually looks up the
request from the zfcp_reqlist - rather than just calling list_del().  So
there's no risk of us calling list_del() on a request that hasn't been
added to any list yet.

Link: https://lore.kernel.org/r/254dc0ae28dccc43ab0b1079ef2c8dcb5fe1d2e4.1618417667.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:19:39 -04:00
Julian Wiedmann 396c100472 s390/qdio: let driver manage the QAOB
We are spending way too much effort on qdio-internal bookkeeping for
QAOB management & caching, and it's still not robust. Once qdio's
TX path has detached the QAOB from a PENDING buffer, we lost all
track of it until it shows up in a CQ notification again. So if the
device is torn down before that notification arrives, we leak the QAOB.

Just have the driver take care of it, and simply pass down a QAOB if
they want a TX with async-completion capability. For a buffer in PENDING
state that requires the QAOB for final completion, qeth can now also try
to recycle the buffer's QAOB rather than unconditionally freeing it.

This also eliminates the qdio_outbuf_state array, which was only needed
to transfer the aob->user1 tag from the driver to the qdio layer.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:05 +01:00
Hannes Reinecke 3273c91bbd scsi: zfcp: Do not set COMMAND_COMPLETE
COMMAND_COMPLETE is defined as '0', and it is a SCSI parallel message to
boot. So drop the call to set_msg_byte().

Link: https://lore.kernel.org/r/20210113090500.129644-15-hare@suse.de
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22 21:14:09 -05:00
Linus Torvalds 60f7c503d9 SCSI misc on 20201216
This series consists of the usual driver updates (ufs, qla2xxx,
 smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
 cleanups, a major power management rework and a load of assorted minor
 updates.  There are a few core updates (formatting fixes being the big
 one) but nothing major this cycle.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
 J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
 hwhOv6Uto89gLCWSEz8=
 =KUPT
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
  target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
  power management rework and a load of assorted minor updates.

  There are a few core updates (formatting fixes being the big one) but
  nothing major this cycle"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: mpt3sas: Update driver version to 36.100.00.00
  scsi: mpt3sas: Handle trigger page after firmware update
  scsi: mpt3sas: Add persistent MPI trigger page
  scsi: mpt3sas: Add persistent SCSI sense trigger page
  scsi: mpt3sas: Add persistent Event trigger page
  scsi: mpt3sas: Add persistent Master trigger page
  scsi: mpt3sas: Add persistent trigger pages support
  scsi: mpt3sas: Sync time periodically between driver and firmware
  scsi: qla2xxx: Update version to 10.02.00.104-k
  scsi: qla2xxx: Fix device loss on 4G and older HBAs
  scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
  scsi: qla2xxx: Fix the call trace for flush workqueue
  scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
  scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
  scsi: qla2xxx: Fix N2N and NVMe connect retry failure
  scsi: qla2xxx: Fix FW initialization error on big endian machines
  scsi: qla2xxx: Fix crash during driver load on big endian machines
  scsi: qla2xxx: Fix compilation issue in PPC systems
  scsi: qla2xxx: Don't check for fw_started while posting NVMe command
  scsi: qla2xxx: Tear down session if FW say it is down
  ...
2020-12-16 13:34:31 -08:00
Linus Torvalds ac7ac4618c for-5.11/block-2020-12-14
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/Xec8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpoLbEACzXypgZWwMdfgRckA/Vt333rXHtbhUV+hK
 2XP+P81iRvr9Esi31UPbRp82vrgcDO0cpI1QmQojS5U5TIQP88BfXptfRZZu48eb
 wT5RDDNQ34HItqAh/yEuYsv9yUKcxeIrB99tBVvM+4UmQg9zTdIW3mg6PvCBdbhV
 N38jI0tCF/PJatjfRuphT/nXonQLPWBlVDmZk06KZQFOwQe9ep1vUi1+nbiRPuo3
 geFBpTh1Kp6Vl1B3n4RpECs6Y7I0RRuJdaH2sDizICla1/BW91F9fQwHimNnUxUq
 e1Q1kMuh6ftcQGkYlHSYcPhuv6CvorldTZCO5arPxWpcwvxriTSMRPWAgUr5pEiF
 fhiGhqeDu9e6vl9vS31wUD1B30hy+jFz9wyjRrDwJ3cPHH1JVBjTzvdX+cIh/1ku
 IbIwUMteUtvUrzqAv/DzbGhedp7xWtOFaVo8j0QFYh9zkjd6b8yDOF/yztwX2gjY
 Xt1cd+KpDSiN449ZRaoMI0sCJAxqzhMa6nsWlb0L7KuNyWKAbvKQBm9Rb47FLV9A
 Vx70KC+zkFoyw23capvIahmQazerriUJ5PGe0lVm6ROgmIFdCpXTPDjnrvq/6RZ/
 GEpD7gTW9atGJ7EuEE8686sAfKD5kneChWLX5EHXf0d0AG5Mr2lKsluiGp5LpPJg
 Q1Xqs6xwww==
 =zo4w
 -----END PGP SIGNATURE-----

Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "Another series of killing more code than what is being added, again
  thanks to Christoph's relentless cleanups and tech debt tackling.

  This contains:

   - blk-iocost improvements (Baolin Wang)

   - part0 iostat fix (Jeffle Xu)

   - Disable iopoll for split bios (Jeffle Xu)

   - block tracepoint cleanups (Christoph Hellwig)

   - Merging of struct block_device and hd_struct (Christoph Hellwig)

   - Rework/cleanup of how block device sizes are updated (Christoph
     Hellwig)

   - Simplification of gendisk lookup and removal of block device
     aliasing (Christoph Hellwig)

   - Block device ioctl cleanups (Christoph Hellwig)

   - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)

   - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)

   - sbitmap improvements (Pavel Begunkov)

   - Hybrid polling fix (Pavel Begunkov)

   - bvec iteration improvements (Pavel Begunkov)

   - Zone revalidation fixes (Damien Le Moal)

   - blk-throttle limit fix (Yu Kuai)

   - Various little fixes"

* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
  blk-mq: fix msec comment from micro to milli seconds
  blk-mq: update arg in comment of blk_mq_map_queue
  blk-mq: add helper allocating tagset->tags
  Revert "block: Fix a lockdep complaint triggered by request queue flushing"
  nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
  blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
  block: disable iopoll for split bio
  block: Improve blk_revalidate_disk_zones() checks
  sbitmap: simplify wrap check
  sbitmap: replace CAS with atomic and
  sbitmap: remove swap_lock
  sbitmap: optimise sbitmap_deferred_clear()
  blk-mq: skip hybrid polling if iopoll doesn't spin
  blk-iocost: Factor out the base vrate change into a separate function
  blk-iocost: Factor out the active iocgs' state check into a separate function
  blk-iocost: Move the usage ratio calculation to the correct place
  blk-iocost: Remove unnecessary advance declaration
  blk-iocost: Fix some typos in comments
  blktrace: fix up a kerneldoc comment
  block: remove the request_queue to argument request based tracepoints
  ...
2020-12-16 12:57:51 -08:00
Christoph Hellwig a54895fa05 block: remove the request_queue to argument request based tracepoints
The request_queue can trivially be derived from the request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Vineeth Vijayan 5db44cfe2e s390/zfcp: remove pm support from zfcp driver
As part of removing the power management support from
s390 arch, remove PM callbacks from the scsi/zfcp driver.

Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02 18:19:23 +01:00
Julian Wiedmann d901963174 scsi: zfcp: Handle event-lost notification for Version Change events
As recovery for a lost Version Change event, trigger an Exchange Config
Data cmd to retrieve the current FW version.

Doing so requires process context (as eg. zfcp_qdio_sbal_get() might need
to sleep), so defer from tasklet context into a work item.

Link: https://lore.kernel.org/r/297c7be2944c3714863fcd22d531d910312d29f0.1603908167.git.bblock@linux.ibm.com
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-29 22:17:01 -04:00
Julian Wiedmann a6c37abe69 scsi: zfcp: Process Version Change events
Handle notifications for a concurrent change of the FCP Channel firmware.
Update the relevant user-visible fields to provide accurate data.

Link: https://lore.kernel.org/r/d2c7bc57c6cf1b65eabbf7a5d0e3927b9f65647f.1603908167.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-29 22:17:01 -04:00
Julian Wiedmann efd321768d scsi: zfcp: Clarify & assert the stat_lock locking in zfcp_qdio_send()
Explain why the plain spin_lock() suffices in current code, even when the
stat_lock is also used by zfcp_qdio_int_req() in tasklet context.

We could also promote the spin_lock() to a spin_lock_irqsave(), but that
would just obfuscate the locking even further.

Link: https://lore.kernel.org/r/b023b1472630f4bf9fce580577d7bb49de89ccbf.1603908167.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-29 22:17:01 -04:00
Vasily Gorbik 84e7b4169f scsi: zfcp: Remove orphaned function declarations
drivers/s390/scsi/zfcp_ext.h: zfcp_sg_free_table - only declaration left
after commit 58f3ead547 ("scsi: zfcp: move SG table helper from aux to fc
and make them static")

drivers/s390/scsi/zfcp_ext.h: zfcp_sg_setup_table - only declaration left
after commit 58f3ead547 ("scsi: zfcp: move SG table helper from aux to fc
and make them static")

Link: https://lore.kernel.org/r/6854ae03c5c65805f746774eeb0f2869fcd6c397.1603908167.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-29 22:17:01 -04:00
Julian Wiedmann 0b524abc2d scsi: zfcp: Lift Input Queue tasklet from qdio
Shift the IRQ tasklet processing from the qdio layer into zfcp.  This will
allow for a good amount of cleanups in qdio, and provides future
opportunity to improve the IRQ processing inside zfcp.

We continue to use the qdio layer's internal tasklet/timer mechanism
(ie. scan_threshold etc) to check for Request Queue completions.  Initially
we planned to check for such completions after inspecting the Response
Queue - this should typically work, but there's a theoretical race where
the device only presents the Request Queue completions _after_ all Response
Queue processing has finished.  If the Request Queue is then also
_completely_ full, we could send no further IOs and thus get no interrupt
that would trigger an inspection of the Request Queue.  So for now stick to
the old model, where we can trust that such a race would be recovered by
qdio's internal timer.

Code-flow wise, this establishes two levels of control:

1. The qdio layer will only deliver IRQs to the device driver if the
   QDIO_IRQ_DISABLED flag is cleared. zfcp manages this through
   qdio_start_irq() / qdio_stop_irq(). The initial state is DISABLED, and
   zfcp_qdio_open() schedules zfcp's IRQ tasklet once during startup to
   explicitly enable IRQ delivery.

2. The zfcp tasklet is initialized with tasklet_disable(), and only gets
   enabled once we open the qdio device.  When closing the qdio device, we
   must disable the tasklet _before_ disabling IRQ delivery (otherwise a
   concurrently running tasklet could re-enable IRQ delivery after we
   disabled it).

   A final tasklet_kill() during teardown ensures that no lingering
   tasklet_schedule() is still accessing the tasklet structure.

Link: https://lore.kernel.org/r/94a765211c48b74a7b91c5e60b158de01db98d43.1603908167.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-29 22:17:01 -04:00
Linus Torvalds 847d4287a0 s390 updates for the 5.10 merge window
- Remove address space overrides using set_fs().
 
 - Convert to generic vDSO.
 
 - Convert to generic page table dumper.
 
 - Add ARCH_HAS_DEBUG_WX support.
 
 - Add leap seconds handling support.
 
 - Add NVMe firmware-assisted kernel dump support.
 
 - Extend NVMe boot support with memory clearing control and addition of
   kernel parameters.
 
 - AP bus and zcrypt api code rework. Add adapter configure/deconfigure
   interface. Extend debug features. Add failure injection support.
 
 - Add ECC secure private keys support.
 
 - Add KASan support for running protected virtualization host with
   4-level paging.
 
 - Utilize destroy page ultravisor call to speed up secure guests shutdown.
 
 - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code.
 
 - Various checksum improvements.
 
 - Other small various fixes and improvements all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl+JXIIACgkQjYWKoQLX
 FBgIWAf9FKpnIsy/aNI2RpvojfySEhgH3T5zxGDTjghCSUQzAu0hIBPKhQOs/YfV
 /apflXxNPneq7FsQPPpNqfdz2DXQrtgDfecK+7GyEVoOawFArgxiwP+tDVy4dmPT
 30PNfr+BpGs7GjKuj33fC0c5U33HYvKzUGJn/GQB2Fhw+5tTDxxCubuS1GVR9iuw
 /U1cQhG4KN0lwEeF2gO7BWWgqTH9C1t60+WzOQhIAbdvgtBRr1ctGu//F5S94BYL
 NBw5Wxb9vUHrMm2mL0n8bi16hSn2MWHmAMQLkxPXI2osBYun3soaHUWFSA3ryFMw
 4BGU+g7T66Pv3ZmLP4jH5UGrn8HWmg==
 =4zdC
 -----END PGP SIGNATURE-----

Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Remove address space overrides using set_fs()

 - Convert to generic vDSO

 - Convert to generic page table dumper

 - Add ARCH_HAS_DEBUG_WX support

 - Add leap seconds handling support

 - Add NVMe firmware-assisted kernel dump support

 - Extend NVMe boot support with memory clearing control and addition of
   kernel parameters

 - AP bus and zcrypt api code rework. Add adapter configure/deconfigure
   interface. Extend debug features. Add failure injection support

 - Add ECC secure private keys support

 - Add KASan support for running protected virtualization host with
   4-level paging

 - Utilize destroy page ultravisor call to speed up secure guests
   shutdown

 - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code

 - Various checksum improvements

 - Other small various fixes and improvements all over the code

* tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits)
  s390/uaccess: fix indentation
  s390/uaccess: add default cases for __put_user_fn()/__get_user_fn()
  s390/zcrypt: fix wrong format specifications
  s390/kprobes: move insn_page to text segment
  s390/sie: fix typo in SIGP code description
  s390/lib: fix kernel doc for memcmp()
  s390/zcrypt: Introduce Failure Injection feature
  s390/zcrypt: move ap_msg param one level up the call chain
  s390/ap/zcrypt: revisit ap and zcrypt error handling
  s390/ap: Support AP card SCLP config and deconfig operations
  s390/sclp: Add support for SCLP AP adapter config/deconfig
  s390/ap: add card/queue deconfig state
  s390/ap: add error response code field for ap queue devices
  s390/ap: split ap queue state machine state from device state
  s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG
  s390/zcrypt: introduce msg tracking in zcrypt functions
  s390/startup: correct early pgm check info formatting
  s390: remove orphaned extern variables declarations
  s390/kasan: make sure int handler always run with DAT on
  s390/ipl: add support to control memory clearing for nvme re-IPL
  ...
2020-10-16 12:36:38 -07:00
Julian Wiedmann d251193d17 scsi: zfcp: Clarify access to erp_action in zfcp_fsf_req_complete()
While reviewing commit 936e6b85da ("scsi: zfcp: Fix panic on ERP timeout
for previously dismissed ERP action"), I stumbled over
zfcp_fsf_req_complete() and wondered whether it has similar issues wrt
concurrent modification of req->erp_action by
zfcp_erp_strategy_check_fsfreq().

But a closer look shows that both its two callers [zfcp_fsf_reqid_check(),
zfcp_fsf_req_dismiss_all()] remove the request from the adapter's req_list
under the req_list's lock.  Hence we can trust that if
zfcp_erp_strategy_check_fsfreq() concurrently looks up the corresponding
req_id, it won't find this request and is thus unable to modify it while
it's being processed by zfcp_fsf_req_complete().

Add a code comment that hopefully makes this easier for future readers, and
condense the two accesses to ->erp_action that made me trip over this code
path in the first place.

Link: https://lore.kernel.org/r/c500eac301fcbba5af942bbd200f2d6b14e46994.1599765652.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-15 18:01:58 -04:00
Julian Wiedmann addf137296 scsi: zfcp: Use list_first_entry_or_null() in zfcp_erp_thread()
Use the right helper to avoid poking around in the list's internals.

Link: https://lore.kernel.org/r/ed669555c73aab95b29444c10066f492c0c43391.1599765652.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-15 18:01:57 -04:00
Julian Wiedmann 180a4c42e5 s390/qdio: always use dev_name() for device name in QIB
Passing a custom name from the device driver is nice - but in practice
it's only zfcp who has been using this. So we might as well hard-code
a naming scheme in the qdio layer, so that qeth also benefits from it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14 10:30:07 +02:00
Steffen Maier 2d9a2c5f58 scsi: zfcp: Fix use-after-free in request timeout handlers
Before v4.15 commit 75492a5156 ("s390/scsi: Convert timers to use
timer_setup()"), we intentionally only passed zfcp_adapter as context
argument to zfcp_fsf_request_timeout_handler(). Since we only trigger
adapter recovery, it was unnecessary to sync against races between timeout
and (late) completion.  Likewise, we only passed zfcp_erp_action as context
argument to zfcp_erp_timeout_handler(). Since we only wakeup an ERP action,
it was unnecessary to sync against races between timeout and (late)
completion.

Meanwhile the timeout handlers get timer_list as context argument and do a
timer-specific container-of to zfcp_fsf_req which can have been freed.

Fix it by making sure that any request timeout handlers, that might just
have started before del_timer(), are completed by using del_timer_sync()
instead. This ensures the request free happens afterwards.

Space time diagram of potential use-after-free:

Basic idea is to have 2 or more pending requests whose timeouts run out at
almost the same time.

req 1 timeout     ERP thread        req 2 timeout
----------------  ----------------  ---------------------------------------
zfcp_fsf_request_timeout_handler
fsf_req = from_timer(fsf_req, t, timer)
adapter = fsf_req->adapter
zfcp_qdio_siosl(adapter)
zfcp_erp_adapter_reopen(adapter,...)
                  zfcp_erp_strategy
                  ...
                  zfcp_fsf_req_dismiss_all
                  list_for_each_entry_safe
                    zfcp_fsf_req_complete 1
                    del_timer 1
                    zfcp_fsf_req_free 1
                    zfcp_fsf_req_complete 2
                                    zfcp_fsf_request_timeout_handler
                    del_timer 2
                                    fsf_req = from_timer(fsf_req, t, timer)
                    zfcp_fsf_req_free 2
                                    adapter = fsf_req->adapter
                                              ^^^^^^^ already freed

Link: https://lore.kernel.org/r/20200813152856.50088-1-maier@linux.ibm.com
Fixes: 75492a5156 ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Suggested-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17 22:12:09 -04:00
Linus Torvalds dfdf16ecfd SCSI misc on 20200806
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
 lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes.  We also have a
 huge docbook fix update like most other subsystems and no major update
 to the core (the few non trivial updates are either minor fixes or
 removing an unused feature [scsi_sdb_cache]).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8
 ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm
 4W/LDptarpTiDI3NuDc=
 =4b0W
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
  hpsa, zfcp, scsi_debug) and minor bug fixes.

  We also have a huge docbook fix update like most other subsystems and
  no major update to the core (the few non trivial updates are either
  minor fixes or removing an unused feature [scsi_sdb_cache])"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
  scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
  scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
  scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
  scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
  scsi: scsi_debug: Implement tur_ms_to_ready parameter
  scsi: scsi_debug: Fix request sense
  scsi: lpfc: Fix typo in comment for ULP
  scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
  scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
  scsi: hpsa: Correct ctrl queue depth
  scsi: target: tcmu: Make TMR notification optional
  scsi: target: tcmu: Implement tmr_notify callback
  scsi: target: tcmu: Fix and simplify timeout handling
  scsi: target: tcmu: Factor out new helper ring_insert_padding
  scsi: target: tcmu: Do not queue aborted commands
  scsi: target: tcmu: Use priv pointer in se_cmd
  scsi: target: Add tmr_notify backend function
  scsi: target: Modify core_tmr_abort_task()
  scsi: target: iscsi: Fix inconsistent debug message
  scsi: target: iscsi: Fix login error when receiving
  ...
2020-08-06 16:50:07 -07:00
Julian Wiedmann c3bfffa5ec scsi: zfcp: Avoid benign overflow of the Request Queue's free-level
zfcp_qdio_send() and zfcp_qdio_int_req() run concurrently, adding and
completing SBALs on the Request Queue. There's a theoretical race where
zfcp_qdio_int_req() completes a number of SBALs & increments the queue's
free-level _before_ zfcp_qdio_send() was able to decrement it.

This can cause ->req_q_free to momentarily hold a value larger than
QDIO_MAX_BUFFERS_PER_Q. Luckily zfcp_qdio_send() is always called under
->req_q_lock, and all readers of the free-level also take this lock. So we
can trust that zfcp_qdio_send() will clean up such a temporary overflow
before anyone can actually observe it.

But it's still confusing and annoying to worry about. So adjust the code to
avoid this race.

Link: https://lore.kernel.org/r/7f61f59a1f8db270312e64644f9173b8f1ac895f.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08 00:50:56 -04:00
Julian Wiedmann 6bcb7c171a scsi: zfcp: Replace open-coded list move
Instead of manually moving each element of the unit and port lists into our
temporary on-stack lists, splice them over in one go.

Link: https://lore.kernel.org/r/cacb179f49ece50fd4dce119c61252d632cdc1d4.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08 00:50:55 -04:00
Julian Wiedmann b43cdb5ac8 scsi: zfcp: Clean up zfcp_erp_action_ready()
We already maintain a pointer to act->adapter. Use it consistently to avoid
any confusion about whose ->erp_ready_head and ->erp_ready_wq we are
accessing.

Link: https://lore.kernel.org/r/d1bb04322f240dee32f4c4a551bc93bc736f4b01.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08 00:50:55 -04:00
Julian Wiedmann 459ad085d8 scsi: zfcp: Fix an outdated comment for zfcp_qdio_send()
zfcp no longer uses the qdio PCI flag, update the comment.

Link: https://lore.kernel.org/r/6717c26fc986bff8776d110e27c199b523684c63.1593780621.git.bblock@linux.ibm.com
Fixes: 21ddaa53f9 ("[SCSI] zfcp: Remove PCI flag")
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08 00:50:53 -04:00
George Spelvin 0cd0e57ec8 scsi: zfcp: Use prandom_u32_max() for backoff
We don't need crypto-grade random numbers for randomized backoffs.  Instead
use prandom_u32_max(ep_ro) which generates a pseudo-random number uniformly
distributed in the interval [0, ep_ro).

Link: https://lore.kernel.org/r/8fc7c4c4069ff1783f4a9ccd84a923f581a09ec5.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: George Spelvin <lkml@sdf.org>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08 00:50:52 -04:00
Steffen Maier 936e6b85da scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
Suppose that, for unrelated reasons, FSF requests on behalf of recovery are
very slow and can run into the ERP timeout.

In the case at hand, we did adapter recovery to a large degree.  However
due to the slowness a LUN open is pending so the corresponding fc_rport
remains blocked.  After fast_io_fail_tmo we trigger close physical port
recovery for the port under which the LUN should have been opened.  The new
higher order port recovery dismisses the pending LUN open ERP action and
dismisses the pending LUN open FSF request.  Such dismissal decouples the
ERP action from the pending corresponding FSF request by setting
zfcp_fsf_req->erp_action to NULL (among other things)
[zfcp_erp_strategy_check_fsfreq()].

If now the ERP timeout for the pending open LUN request runs out, we must
not use zfcp_fsf_req->erp_action in the ERP timeout handler.  This is a
problem since v4.15 commit 75492a5156 ("s390/scsi: Convert timers to use
timer_setup()"). Before that we intentionally only passed zfcp_erp_action
as context argument to zfcp_erp_timeout_handler().

Note: The lifetime of the corresponding zfcp_fsf_req object continues until
a (late) response or an (unrelated) adapter recovery.

Just like the regular response path ignores dismissed requests
[zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the
ERP timeout handler now needs to ignore dismissed requests.  So simply
return early in the ERP timeout handler if the FSF request is marked as
dismissed in its status flags.  To protect against the race where
zfcp_erp_strategy_check_fsfreq() dismisses and sets
zfcp_fsf_req->erp_action to NULL after our previous status flag check,
return early if zfcp_fsf_req->erp_action is NULL.  After all, the former
ERP action does not need to be woken up as that was already done as part of
the dismissal above [zfcp_erp_action_dismiss()].

This fixes the following panic due to kernel page fault in IRQ context:

Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d
Oops: 0004 ilc:2 [#1] SMP
Modules linked in: ...
CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G            E  X   ...
Hardware name: IBM 8561 T01 701 (LPAR)
Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp])
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000
           000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02
           0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000
           0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8
Krnl Code: 001fffff80549bd4: a7180000            lhi     %r1,0
           001fffff80549bd8: 4120a0f0            la      %r2,240(%r10)
          #001fffff80549bdc: a53e0003            llilh   %r3,3
          >001fffff80549be0: ba132000            cs      %r1,%r3,0(%r2)
           001fffff80549be4: a7740037            brc     7,1fffff80549c52
           001fffff80549be8: e320b0180004        lg      %r2,24(%r11)
           001fffff80549bee: e31020e00004        lg      %r1,224(%r2)
           001fffff80549bf4: 412020e0            la      %r2,224(%r2)
Call Trace:
 [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp]
 [<00000985915e26f0>] call_timer_fn+0x38/0x190
 [<00000985915e2944>] expire_timers+0xfc/0x190
 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218
 [<0000098591ca7c4c>] __do_softirq+0x144/0x398
 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88
 [<0000098591551b58>] irq_exit+0xb0/0xb8
 [<0000098591510c6a>] do_IRQ+0x82/0xb0
 [<0000098591ca7140>] ext_int_handler+0x128/0x12c
 [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60
([<000009859172ae4c>] clear_huge_page+0xec/0x250)
 [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768
 [<000009859172a712>] __handle_mm_fault+0x88a/0x900
 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0
 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8
 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220
Last Breaking-Event-Address:
 [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt

Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com
Fixes: 75492a5156 ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-24 00:01:09 -04:00
Benjamin Block d0dff2ac98 scsi: zfcp: Move allocation of the shost object to after xconf- and xport-data
At the moment we allocate and register the Scsi_Host object corresponding
to a zfcp adapter (FCP device) very early in the life cycle of the adapter
- even before we fully discover and initialize the underlying
firmware/hardware. This had the advantage that we could already use the
Scsi_Host object, and fill in all its information during said discover and
initialize.

Due to commit 737eb78e82 ("block: Delay default elevator initialization")
(first released in v5.4), we noticed a regression that would prevent us
from using any storage volume if zfcp is configured with support for DIF or
DIX (zfcp.dif=1 || zfcp.dix=1). Doing so would result in an illegal memory
access as soon as the first request is sent with such an configuration. As
example for a crash resulting from this:

  scsi host0: scsi_eh_0: sleeping
  scsi host0: zfcp
  qdio: 0.0.1900 ZFCP on SC 4bd using AI:1 QEBSM:0 PRI:1 TDD:1 SIGA: W AP
  scsi 0:0:0:0: scsi scan: INQUIRY pass 1 length 36
  Unable to handle kernel pointer dereference in virtual kernel address space
  Failing address: 0000000000000000 TEID: 0000000000000483
  Fault in home space mode while using kernel ASCE.
  AS:0000000035c7c007 R3:00000001effcc007 S:00000001effd1000 P:000000000000003d
  Oops: 0004 ilc:3 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in: ...
  CPU: 1 PID: 783 Comm: kworker/u760:5 Kdump: loaded Not tainted 5.6.0-rc2-bb-next+ #1
  Hardware name: ...
  Workqueue: scsi_wq_0 fc_scsi_scan_rport [scsi_transport_fc]
  Krnl PSW : 0704e00180000000 000003ff801fcdae (scsi_queue_rq+0x436/0x740 [scsi_mod])
             R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
  Krnl GPRS: 0fffffffffffffff 0000000000000000 0000000187150120 0000000000000000
             000003ff80223d20 000000000000018e 000000018adc6400 0000000187711000
             000003e0062337e8 00000001ae719000 0000000187711000 0000000187150000
             00000001ab808100 0000000187150120 000003ff801fcd74 000003e0062336a0
  Krnl Code: 000003ff801fcd9e: e310a35c0012        lt      %r1,860(%r10)
             000003ff801fcda4: a7840010           brc     8,000003ff801fcdc4
            #000003ff801fcda8: e310b2900004       lg      %r1,656(%r11)
            >000003ff801fcdae: d71710001000       xc      0(24,%r1),0(%r1)
             000003ff801fcdb4: e310b2900004       lg      %r1,656(%r11)
             000003ff801fcdba: 41201018           la      %r2,24(%r1)
             000003ff801fcdbe: e32010000024       stg     %r2,0(%r1)
             000003ff801fcdc4: b904002b           lgr     %r2,%r11
  Call Trace:
   [<000003ff801fcdae>] scsi_queue_rq+0x436/0x740 [scsi_mod]
  ([<000003ff801fcd74>] scsi_queue_rq+0x3fc/0x740 [scsi_mod])
   [<00000000349c9970>] blk_mq_dispatch_rq_list+0x390/0x680
   [<00000000349d1596>] blk_mq_sched_dispatch_requests+0x196/0x1a8
   [<00000000349c7a04>] __blk_mq_run_hw_queue+0x144/0x160
   [<00000000349c7ab6>] __blk_mq_delay_run_hw_queue+0x96/0x228
   [<00000000349c7d5a>] blk_mq_run_hw_queue+0xd2/0xe0
   [<00000000349d194a>] blk_mq_sched_insert_request+0x192/0x1d8
   [<00000000349c17b8>] blk_execute_rq_nowait+0x80/0x90
   [<00000000349c1856>] blk_execute_rq+0x6e/0xb0
   [<000003ff801f8ac2>] __scsi_execute+0xe2/0x1f0 [scsi_mod]
   [<000003ff801fef98>] scsi_probe_and_add_lun+0x358/0x840 [scsi_mod]
   [<000003ff8020001c>] __scsi_scan_target+0xc4/0x228 [scsi_mod]
   [<000003ff80200254>] scsi_scan_target+0xd4/0x100 [scsi_mod]
   [<000003ff802d8b96>] fc_scsi_scan_rport+0x96/0xc0 [scsi_transport_fc]
   [<0000000034245ce8>] process_one_work+0x458/0x7d0
   [<00000000342462a2>] worker_thread+0x242/0x448
   [<0000000034250994>] kthread+0x15c/0x170
   [<0000000034e1979c>] ret_from_fork+0x30/0x38
  INFO: lockdep is turned off.
  Last Breaking-Event-Address:
   [<000003ff801fbc36>] scsi_add_cmd_to_list+0x9e/0xa8 [scsi_mod]
  Kernel panic - not syncing: Fatal exception: panic_on_oops

While this issue is exposed by the commit named above, this is only by
accident. The real issue exists for longer already - basically since it's
possible to use blk-mq via scsi-mq, and blk-mq pre-allocates all requests
for a tag-set during initialization of the same. For a given Scsi_Host
object this is done when adding the object to the midlayer
(`scsi_add_host()` and such). In `scsi_mq_setup_tags()` the midlayer
calculates how much memory is required for a single scsi_cmnd, and its
additional data, which also might include space for additional protection
data - depending on whether the Scsi_Host has any form of protection
capabilities (`scsi_host_get_prot()`).

The problem is now thus, because zfcp does this step before we actually
know whether the firmware/hardware has these capabilities, we don't set any
protection capabilities in the Scsi_Host object. And so, no space is
allocated for additional protection data for requests in the Scsi_Host
tag-set.

Once we go through discover and initialize the FCP device firmware/hardware
fully (this is done via the firmware commands "Exchange Config Data" and
"Exchange Port Data") we find out whether it actually supports DIF and DIX,
and we set the corresponding capabilities in the Scsi_Host object (in
`zfcp_scsi_set_prot()`). Now the Scsi_Host potentially has protection
capabilities, but the already allocated requests in the tag-set don't have
any space allocated for that.

When we then trigger target scanning or add scsi_devices manually, the
midlayer will use requests from that tag-set, and before sending most
requests, it will also call `scsi_mq_prep_fn()`. To prepare the scsi_cmnd
this function will check again whether the used Scsi_Host has any
protection capabilities - and now it potentially has - and if so, it will
try to initialize the assumed to be preallocated structures and thus it
causes the crash, like shown above.

Before delaying the default elevator initialization with the commit named
above, we always would also allocate an elevator for any scsi_device before
ever sending any requests - in contrast to now, where we do it after
device-probing. That elevator in turn would have its own tag-set, and that
is initialized after we went through discovery and initialization of the
underlying firmware/hardware. So requests from that tag-set can be
allocated properly, and if used - unless the user changes/disabled the
default elevator - this would hide the underlying issue.

To fix this for any configuration - with or without an elevator - we move
the allocation and registration of the Scsi_Host object for a given FCP
device to after the first complete discovery and initialization of the
underlying firmware/hardware. By doing that we can make all basic
properties of the Scsi_Host known to the midlayer by the time we call
`scsi_add_host()`, including whether we have any protection capabilities.

To do that we have to delay all the accesses that we would have done in the
past during discovery and initialization, and do them instead once we are
finished with it. The previous patches ramp up to this by fencing and
factoring out all these accesses, and make it possible to re-do them later
on. In addition we make also use of the diagnostic buffers we recently
added with

commit 92953c6e0a ("scsi: zfcp: signal incomplete or error for sync exchange config/port data")
commit 7e418833e6 ("scsi: zfcp: diagnostics buffer caching and use for exchange port data")
commit 088210233e ("scsi: zfcp: add diagnostics buffer for exchange config data")

(first released in v5.5), because these already cache all the information
we need for that "re-do operation" - the information cached are always
updated during xconf or xport data, so it won't be stale.

In addition to the move and re-do, this patch also updates the
function-documentation of `zfcp_scsi_adapter_register()` and changes how it
reports if a Scsi_Host object already exists. In that case future
recovery-operations can skip this step completely and behave much like they
would do in the past - zfcp does not release a once allocated Scsi_Host
object unless the corresponding FCP device is deconstructed completely.

Link: https://lore.kernel.org/r/030dd6da318bbb529f0b5268ec65cebcd20fc0a3.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:52 -04:00
Benjamin Block 71159b6ecb scsi: zfcp: Fence early sysfs interfaces for accesses of shost objects
When setting an adapter online for the first time, we also create a couple
of entries for it in the sysfs device tree. This is also true even if the
adapter has not yet ever gone successfully through exchange config and
exchange port data.

When moving the scsi host object allocation and registration to after the
first exchange config and exchange port data, this make the `port_rescan`
attribute susceptible to invalid pointer-dereferences of the shost field
before the adapter is fully initialized.

When written to, it schedules a `scan_work` item that will in turn make use
of the associated fibre channel host object to check the topology used for
this FCP device.

Because scanning for remote ports can't be done successfully without
completing exchange config and exchange port data first, we can simply
fence `port_rescan`, and so prevent the illegal access.

As with cases where we can't get a reference to the adapter, we also return
-ENODEV here. Applications need to handle that errno today already.

After a successful allocation of the scsi host object nothing changes in
the work flow.

Link: https://lore.kernel.org/r/ef65366d309993ca91b6917727590ca7ca166c8f.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:50 -04:00
Benjamin Block 971f2abb4c scsi: zfcp: Fence adapter status propagation for common statuses
Common status flags that all main objects - adapter, port, and unit -
support are propagated to sub-objects when set or cleared. For instance,
when setting the status ZFCP_STATUS_COMMON_ERP_INUSE for an adapter object,
we will propagate this to all its child ports and units - same for when
clearing a common status flag.

Units of an adapter object are enumerated via __shost_for_each_device()
over the scsi host object of the corresponding adapter.

Once we move the scsi host object allocation and registration to after the
first exchange config and exchange port data, this won't be possible for
cases where we set or clear common statuses during the very first adapter
recovery.

But since we won't have any port or unit objects yet at that point of time,
we can just fence the status propagation for cases where the scsi host
object is not yet set in the adapter object. It won't change any effective
status propagations, but will prevent us from dereferencing invalid
pointers.

For any later point in the work flow the scsi host object will be set and
thus nothing is changed then.

Link: https://lore.kernel.org/r/f51fe5f236a1e3d1ce53379c308777561bfe35e1.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:50 -04:00
Benjamin Block ac007adc4d scsi: zfcp: Move p-t-p port allocation to after xport data
When doing the very first adapter recovery - initialization - for a FCP
device in a point-to-point topology we also allocate the port object
corresponding to the attached remote port, and trigger a port recovery for
it that will run after the adapter recovery finished.

Right now this happens right after we finished with the exchange config
data command, and uses the fibre channel host object corresponding to the
FCP device to determine whether a point-to-point topology is used.

When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, this use of the fc_host object is not
possible anymore at that point in the work flow.

But the allocation and recovery trigger doesn't have notable side-effects
on the following exchange port data processing, so we can move those to
after xport data, and thus also to after the scsi host object allocation,
once we move it. Then the fc_host object can be used again, like it is now.

For any further adapter recoveries this doesn't change anything, because at
that point the port object already exists and recovery is triggered
elsewhere for existing port objects.

Link: https://lore.kernel.org/r/73e5d4ac21e2b37bf0c3ca8e530bc5a5c6e74f8f.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:49 -04:00
Benjamin Block 990486f3a8 scsi: zfcp: Fence fc_host updates during link-down handling
When receiving a notification that a FCP device lost its local link we
usually update the fibre channel host object which represents that FCP
device to reflect that.

This notification/information can also surface when the FCP device is
running through adapter recovery (exchange config and exchange port data
return incomplete).

When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, and this happens during the very first
adapter recovery, these updates can not be done until after the scsi host
object is allocated.

Reorder the fc_host updates in zfcp_fsf_fc_host_link_down() so that they
only happen after a check of whether the scsi host object is already
allocated or not.

During the first adapter recovery this will cause the skip of these updates
if a link-down condition is detected, but we can repeat them after we
allocated the scsi host object, if necessary.

For any further link-down handling the only changes in the work flow are
the slightly reordered assignments in zfcp_fsf_fc_host_link_down().

Link: https://lore.kernel.org/r/f841f2cda61dcd7b8549910c44e1831927459edf.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:48 -04:00
Benjamin Block 52e61fde5e scsi: zfcp: Move fc_host updates during xport data handling into fenced function
When executing exchange port data for a FCP device for the first time, or
after an adapter recovery, we update several properties of the fibre
channel host object which represents that FCP device.

When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, this is not possible for the former case.

Move all these update into separate, and fenced function that first checks
whether the scsi host object already exists or not, before making the
updates.

During the first ever exchange port data in the adapter life cycle this
will make the exchange port data handler skip over this update step, but we
can repeat it later, after we allocated the scsi host object.

For any further recovery of that adapter the work flow is only changed
slightly because then the scsi host object already exists and we don't free
it until we release the adapter completely at the end of its life cycle.

Link: https://lore.kernel.org/r/ae454c2dc6da0b02907c489af91d0b211d331825.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:48 -04:00
Benjamin Block bd1684817d scsi: zfcp: Move shost updates during xconfig data handling into fenced function
When executing exchange config data for a FCP device for the first time, or
after an adapter recovery, we update several properties of the scsi host or
fibre channel host object that represent that FCP device.

When moving the scsi host object allocation and registration - and thus
also the fibre channel host object allocation - to after the first exchange
config and exchange port data, this is not possible for the former case.

Move all these update into separate, and fenced function that first checks
whether the scsi host object already exists or not, before making the
updates.

During the first ever exchange config data in the adapter life cycle this
will make the exchange config data handler skip over this update step, but
we can repeat it later, after we allocated the scsi host object.

For any further recovery of that adapter the work flow is only changed
slightly because then the scsi host object already exists and we don't free
it until we release the adapter completely at the end of its life cycle.

Link: https://lore.kernel.org/r/5fc3f4d38d4334f7aa595497c6f7865fb1102e0f.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:47 -04:00
Benjamin Block 978857c7e3 scsi: zfcp: Move shost modification after QDIO (re-)open into fenced function
When establishing and activating the QDIO queue pair for a FCP device for
the first time, or after an adapter recovery, we publish some of its
characteristics to the scsi host object representing that FCP device.

When moving the scsi host object allocation and registration to after the
first exchange config and exchange port data, this is not possible for the
former case - QDIO open for the first time - because that happens before
exchange config and exchange port data.

Move the scsi host object update into a fenced function that checks whether
the object already exists or not. This way we can repeat that step later,
once we are past the allocation.

Once the first recovery succeeds we don't release the scsi host object
anymore, so further recoveries do work as before.

Link: https://lore.kernel.org/r/a214ebf508f71e3690113e3e90edab1cea0e24e3.1588956679.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11 23:19:46 -04:00
Linus Torvalds 93f3321f65 SCSI misc on 20200410
This is a batch of changes that didn't make it in the initial pull
 request because the lpfc series had to be rebased to redo an incorrect
 split.  It's basically driver updates to lpfc, target, bnx2fc and ufs
 with the rest being minor updates except the sr_block_release one
 which fixes a use after free introduced by the removal of the global
 mutex in the first patch set.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXpC3hSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRTaAP9umhxu
 8rRnJ5hsxXRmxOUzO5BGe403ffcBeAiEKQ2n3gEAjeoxZAaqKuDDDRfXyRnBpt9Z
 QuBrgpm1gdXrJT5DDj4=
 =+4Qg
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is a batch of changes that didn't make it in the initial pull
  request because the lpfc series had to be rebased to redo an incorrect
  split.

  It's basically driver updates to lpfc, target, bnx2fc and ufs with the
  rest being minor updates except the sr_block_release one which fixes a
  use after free introduced by the removal of the global mutex in the
  first patch set"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits)
  scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table
  scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear
  scsi: bnx2fc: fix boolreturn.cocci warnings
  scsi: zfcp: use fallthrough;
  scsi: aacraid: do not overwrite retval in aac_reset_adapter()
  scsi: sr: Fix sr_block_release()
  scsi: aic7xxx: Remove more FreeBSD-specific code
  scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug
  scsi: ufs: set device as active power mode after resetting device
  scsi: iscsi: Report unbind session event when the target has been removed
  scsi: lpfc: Change default SCSI LUN QD to 64
  scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted
  scsi: libfc: If PRLI rejected, move rport to PLOGI state
  scsi: bnx2fc: Update the driver version to 2.12.13
  scsi: bnx2fc: Fix SCSI command completion after cleanup is posted
  scsi: bnx2fc: Process the RQE with CQE in interrupt context
  scsi: target: use the stack for XCOPY passthrough cmds
  scsi: target: increase XCOPY I/O size
  scsi: target: avoid per-loop XCOPY buffer allocations
  scsi: target: drop xcopy DISK BLOCK LENGTH debug
  ...
2020-04-10 12:21:11 -07:00
Julian Wiedmann 1da1092dbf s390/qdio: remove cdev from init_data
It's no longer needed.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06 13:13:50 +02:00
Julian Wiedmann d8564e19da s390/qdio: allow for non-contiguous SBAL array in init_data
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers()
for each individual queue. But when later passing the SBAL addresses to
qdio_establish(), they need to be in a single array of pointers.
So if the driver uses multiple Input or Output queues, it needs to
allocate a temporary array just to present all its SBAL pointers in this
layout.

This patch slightly changes the format of the QDIO initialization data,
so that drivers can pass a per-queue array where each element points to
a queue's SBAL array.
zfcp doesn't use multiple queues, so the impact there is trivial.
For qeth this brings a nice reduction in complexity, and removes
a page-sized allocation.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06 13:13:50 +02:00
Julian Wiedmann ad96401cdb zfcp: inline zfcp_qdio_setup_init_data()
In preparation for a subsequent patch, move the setup of init_data into
the only caller.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06 13:13:50 +02:00
Julian Wiedmann 3db1db93e3 s390/qdio: cleanly split alloc and establish
All that qdio_allocate() actually uses from the init_data is the cdev,
and the number of Input and Output Queues. Have the driver pass those as
parameters, and defer the init_data processing into qdio_establish().
This includes writing per-device(!) trace entries, and most of the
sanity checks.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06 13:13:50 +02:00
Linus Torvalds 79f51b7b9c SCSI misc on 20200402
update changing all our txt files to rst ones.  Excluding that, we
 have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc,
 pm80xx, aacraid), a treewide update for scnprintf and some other minor
 updates.  The major core update is Hannes moving functions out of the
 aacraid driver and into the core.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXoYKiyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSasAP4iGwSB
 Y8tFaZgWadu76+wj5MdqTBoXdhnIuFF0rZG3pQEAiIKdsfQlbSFdm75+gUtx5hG/
 GOilX/pJczTRJDCGNis=
 =g7Sk
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series has a huge amount of churn because it pulls in Mauro's doc
  update changing all our txt files to rst ones.

  Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
  zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
  some other minor updates.

  The major core change is Hannes moving functions out of the aacraid
  driver and into the core"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
  scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
  scsi: ufs: Do not rely on prefetched data
  scsi: dc395x: remove dc395x_bios_param
  scsi: libiscsi: Fix error count for active session
  scsi: hpsa: correct race condition in offload enabled
  scsi: message: fusion: Replace zero-length array with flexible-array member
  scsi: qedi: Add PCI shutdown handler support
  scsi: qedi: Add MFW error recovery process
  scsi: ufs: Enable block layer runtime PM for well-known logical units
  scsi: ufs-qcom: Override devfreq parameters
  scsi: ufshcd: Let vendor override devfreq parameters
  scsi: ufshcd: Update the set frequency to devfreq
  scsi: ufs: Resume ufs host before accessing ufs device
  scsi: ufs-mediatek: customize the delay for enabling host
  scsi: ufs: make HCE polling more compact to improve initialization latency
  scsi: ufs: allow custom delay prior to host enabling
  scsi: ufs-mediatek: use common delay function
  scsi: ufs: introduce common and flexible delay function
  scsi: ufs: use an enum for host capabilities
  scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
  ...
2020-04-02 17:03:53 -07:00
Joe Perches cec9cbac52 scsi: zfcp: use fallthrough;
Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
[bblock@linux.ibm.com: resolved merge conflict with recently upstream-sent patch "zfcp: expose fabric name as common fc_host sysfs attribute"]
Link: https://lore.kernel.org/r/d14669a67a17392490d3184117941123765db1a4.1585663010.git.bblock@linux.ibm.com
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-31 22:24:02 -04:00
Jens Remus 42cabdaf10 scsi: zfcp: log FC Endpoint Security errors
Log any FC Endpoint Security errors to the kernel ring buffer with rate-
limiting.

Link: https://lore.kernel.org/r/20200312174505.51294-11-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17 13:12:42 -04:00
Jens Remus e53d92856e scsi: zfcp: enhance handling of FC Endpoint Security errors
Enable for explicit FCP channel FC Endpoint Security error reporting and
handle any FSF security errors according to specification. Take the
following recovery actions when a FSF_SECURITY_ERROR is reported for the
specified FSF commands:

- Open Port: Retry the command if possible
- Send FCP : Physically close the remote port and reopen

For Open Port the command status is set to error, which triggers a retry.
For Send FCP the command status is set to error and recovery is triggered
to physically reopen the remote port.

Link: https://lore.kernel.org/r/20200312174505.51294-10-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17 13:12:41 -04:00
Jens Remus 616da39e00 scsi: zfcp: trace FC Endpoint Security of FCP devices and connections
Trace changes in Fibre Channel Endpoint Security capabilities of FCP
devices as well as changes in Fibre Channel Endpoint Security state of
their connections to FC remote ports as FC Endpoint Security changes with
trace level 3 in HBA DBF.

A change in FC Endpoint Security capabilities of FCP devices is traced as
response to FSF command FSF_QTCB_EXCHANGE_PORT_DATA with a trace tag of
"fsfcesa" and a WWPN of ZFCP_DBF_INVALID_WWPN = 0x0000000000000000 (see
FC-FS-4 §18 "Name_Identifier Formats", NAA field).

A change in FC Endpoint Security state of connections between FCP devices
and FC remote ports is traced as response to FSF command
FSF_QTCB_OPEN_PORT_WITH_DID with a trace tag of "fsfcesp".

Example trace record of FC Endpoint Security capability change of FCP
device formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : HBA
Subarea        : 00
Level          : 3
Exception      : -
CPU ID         : ...
Caller         : 0x...
Record ID      : 5                    ZFCP_DBF_HBA_FCES
Tag            : fsfcesa              FSF FC Endpoint Security adapter
Request ID     : 0x...
Request status : 0x00000010
FSF cmnd       : 0x0000000e           FSF_QTCB_EXCHANGE_PORT_DATA
FSF sequence no: 0x...
FSF issued     : ...
FSF stat       : 0x00000000           FSF_GOOD
FSF stat qual  : n/a
Prot stat      : n/a
Prot stat qual : n/a
Port handle    : 0x00000000           none (invalid)
LUN handle     : n/a
WWPN           : 0x0000000000000000   ZFCP_DBF_INVALID_WWPN
FCES old       : 0x00000000           old FC Endpoint Security
FCES new       : 0x00000007           new FC Endpoint Security

Example trace record of FC Endpoint Security change of connection to
FC remote port formatted with zfcpdbf from s390-tools:

Timestamp      : ...
Area           : HBA
Subarea        : 00
Level          : 3
Exception      : -
CPU ID         : ...
Caller         : 0x...
Record ID      : 5                    ZFCP_DBF_HBA_FCES
Tag            : fsfcesp              FSF FC Endpoint Security port
Request ID     : 0x...
Request status : 0x00000010
FSF cmnd       : 0x00000005           FSF_QTCB_OPEN_PORT_WITH_DID
FSF sequence no: 0x...
FSF issued     : ...
FSF stat       : 0x00000000           FSF_GOOD
FSF stat qual  : n/a
Prot stat      : n/a
Prot stat qual : n/a
Port handle    : 0x...
WWPN           : 0x500507630401120c   WWPN
FCES old       : 0x00000000           old FC Endpoint Security
FCES new       : 0x00000004           new FC Endpoint Security

Link: https://lore.kernel.org/r/20200312174505.51294-9-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17 13:12:40 -04:00