commit 364b61818f ("blk-mq: clearing flush request reference in
tags->rqs[]") is added to clear the to-be-free flush request from
tags->rqs[] for avoiding use-after-free on the flush rq.
Yu Kuai reported that blk_mq_clear_flush_rq_mapping() slows down boot time
by ~8s because running scsi probe which may create and remove lots of
unpresent LUNs on megaraid-sas which uses BLK_MQ_F_TAG_HCTX_SHARED and
each request queue has lots of hw queues.
Improve the situation by not running blk_mq_clear_flush_rq_mapping if
disk isn't added when there can't be any flush request issued.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220616014401.817001-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
q->elevator is referred in blk_mq_has_sqsched() without any protection,
no .q_usage_counter is held, no queue srcu and rcu read lock is held,
so potential use-after-free may be triggered.
Fix the issue by adding one queue flag for checking if the elevator
uses single queue style dispatch. Meantime the elevator feature flag
of ELEVATOR_F_MQ_AWARE isn't needed any more.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220616014401.817001-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator can be tore down by sysfs switch interface or disk release, so
hold ->sysfs_lock before referring to q->elevator, then potential
use-after-free can be avoided.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220616014401.817001-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch prevents that test nvme/004 triggers the following:
UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
show_stack+0x52/0x58
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x3b
__ubsan_handle_out_of_bounds.cold+0x44/0x49
blk_mq_alloc_request_hctx+0x304/0x310
__nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
nvmf_dev_write+0xae/0x111 [nvme_fabrics]
vfs_write+0x144/0x560
ksys_write+0xb7/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 20e4d81393 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=lBeb
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block
Pull block request execute cleanups from Jens Axboe:
"This change was advertised in the initial core block pull request, but
didn't actually make that branch as we deferred it to a post-merge
pull request to avoid a bunch of cross branch issues.
This series cleans up the block execute path quite nicely"
* tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block:
blk-mq: remove the done argument to blk_execute_rq_nowait
blk-mq: avoid a mess of casts for blk_end_sync_rq
blk-mq: remove __blk_execute_rq_nowait
-----BEGIN PGP SIGNATURE-----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=7JDU
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-06-02' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just a collection of fixes that have been queued up since the initial
merge window pull request, the majority of which are targeted for
stable as well.
One bio_set fix that fixes an issue with the dm adoption of cached bio
structs that got introduced in this merge window"
* tag 'for-5.19/block-2022-06-02' of git://git.kernel.dk/linux-block:
block: Fix potential deadlock in blk_ia_range_sysfs_show()
block: fix bio_clone_blkg_association() to associate with proper blkcg_gq
block: remove useless BUG_ON() in blk_mq_put_tag()
blk-mq: do not update io_ticks with passthrough requests
block: make bioset_exit() fully resilient against being called twice
block: use bio_queue_enter instead of blk_queue_enter in bio_poll
block: document BLK_STS_AGAIN usage
block: take destination bvec offsets into account in bio_copy_data_iter
blk-iolatency: Fix inflight count imbalances and IO hangs on offline
blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx
Flush or passthrough requests are not accounted as normal IO in completion.
To reflect iostat for slow IO, io_ticks is updated when stat show called
based on inflight numbers.
It may cause inconsistent io_ticks calculation result.
So do not account non-passthrough request when check inflight.
Fixes: 86d7331299 ("block: update io_ticks when io hang")
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: samuelliao <samuelliao@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220530064059.1120058-1-haisuwang@tencent.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let the caller set it together with the end_io_data instead of passing
a pointless argument. Note the the target code did in fact already
set it and then just overrode it again by calling blk_execute_rq_nowait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220524121530.943123-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of trying to cast a __bitwise 32-bit integer to a larger integer
and then a pointer, just allow a struct with the blk_status_t and the
completion on stack and set the end_io_data to that. Use the
opportunity to move the code to where it belongs and drop rather
confusing comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220524121530.943123-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't want to plug for synchronous execution that where we immediately
wait for the request. Once that is done not a whole lot of code is
shared, so just remove __blk_execute_rq_nowait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220524121530.943123-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
blk_mq_run_hw_queues() could be run when there isn't queued request and
after queue is cleaned up, at that time tagset is freed, because tagset
lifetime is covered by driver, and often freed after blk_cleanup_queue()
returns.
So don't touch ->tagset for figuring out current default hctx by the mapping
built in request queue, so use-after-free on tagset can be avoided. Meantime
this way should be fast than retrieving mapping from tagset.
Cc: "yukuai (C)" <yukuai3@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Fixes: b6e68ee825 ("blk-mq: Improve performance of non-mq IO schedulers with multiple HW queues")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220522122350.743103-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First we can't add request into plug list in blk_mq_request_bypass_insert
which may be called when flushing plug list, so nested plug is caused.
Second if polled passthrough request is inserted via blk_execute_rq(),
it can't be added to plug list too since io polling needs the request
to be issued to driver.
Fixes the two by moving plugging into blk_execute_rq_no_wait().
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 1c2d2fff6d ("block: wire-up support for passthrough plugging")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220512140010.1458645-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for plugging in passthrough path. When plugging is enabled, the
requests are added to a plug instead of getting dispatched to the driver.
And when the plug is finished, the whole batch gets dispatched via
->queue_rqs which turns out to be more efficient. Otherwise dispatching
used to happen via ->queue_rq, one request at a time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 0006707723. It has a
couple problems:
* bio_issue_time() is stored in bio->bi_issue truncated to 51 bits. This
overflows in slightly over 26 days. Setting rq->io_start_time_ns with it
means that io duration calculation would yield >26days after 26 days of
uptime. This, for example, confuses kyber making it cause high IO
latencies.
* rq->io_start_time_ns should record the time that the IO is issued to the
device so that on-device latency can be measured. However,
bio_issue_time() is set before the bio goes through the rq-qos controllers
(wbt, iolatency, iocost), so when the bio gets throttled in any of the
mechanisms, the measured latencies make no sense - on-device latencies end
up higher than request-alloc-to-completion latencies.
We'll need a smarter way to avoid calling ktime_get_ns() repeatedly
back-to-back. For now, let's revert the commit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v5.16+
Link: https://lore.kernel.org/r/YmmeOLfo5lzc+8yI@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a disk has been marked dead, don't print warnings for I/O errors
as they are very much expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220323163815.1526998-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=QzvG
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Either fixes or a few additions that got missed in the initial merge
window pull. In detail:
- List iterator fix to avoid leaking value post loop (Jakob)
- One-off fix in minor count (Christophe)
- Fix for a regression in how io priority setting works for an
exiting task (Jiri)
- Fix a regression in this merge window with blkg_free() being called
in an inappropriate context (Ming)
- Misc fixes (Ming, Tom)"
* tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block:
blk-wbt: remove wbt_track stub
block: use dedicated list iterator variable
block: Fix the maximum minor value is blk_alloc_ext_minor()
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING
block: avoid calling blkg_free() in atomic context
lib/sbitmap: allocate sb->map via kvzalloc_node
-----BEGIN PGP SIGNATURE-----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=efaq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
We used to sort the plug list if we had multiple queues before dispatching
requests to the IO scheduler. This usually isn't needed, but for certain
workloads that interleave requests to disks, it's a less efficient to
process the plug list one-by-one if everything is interleaved.
Don't sort the list, but skip through it and flush out entries that have
the same target at the same time.
Fixes: df87eb0fce ("block: get rid of plug list sorting")
Reported-and-tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue's top debugfs dir is removed from blk_release_queue(), so all
hctx's debugfs dirs are removed from there. Given blk_mq_exit_queue()
is only called from blk_cleanup_queue(), it isn't necessary to remove
hctx debugfs from blk_mq_exit_queue().
So remove it from blk_mq_exit_queue().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220308055200.735835-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To simplify further changes allow for double calling blk_mq_free_rqs on
a queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[hch: split out from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220308055200.735835-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I/O accounting buckets I/O into the read/write/discard categories into
which passthrough I/O does not fit at all. It also accounts to the
block_device, which may not even exist for passthrough I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220308055200.735835-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First code becomes more clean by switching to xarray from plain array.
Second use-after-free on q->queue_hw_ctx can be fixed because
queue_for_each_hw_ctx() may be run when updating nr_hw_queues is
in-progress. With this patch, q->hctx_table is defined as xarray, and
this structure will share same lifetime with request queue, so
queue_for_each_hw_ctx() can use q->hctx_table to lookup hctx reliably.
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220308073219.91173-7-ming.lei@redhat.com
[axboe: fix blk_mq_hw_ctx forward declaration]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is inevitable to cause use-after-free on q->queue_hw_ctx between
queue_for_each_hw_ctx() and blk_mq_update_nr_hw_queues(). And converting
to xarray can fix the uaf, meantime code gets cleaner.
Prepare for converting q->queue_hctx_ctx into xarray, one thing is that
xa_for_each() can only accept 'unsigned long' as index, so changes type
of hctx index of queue_for_each_hw_ctx() into 'unsigned long'.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220308073219.91173-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
queue map can be changed when updating nr_hw_queues, so we need to
reconfigure queue's poll capability. Add one helper for doing this job.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220308073219.91173-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_alloc_and_init_hctx() has already taken reuse into account, so
no need to do it outside, then we can simplify blk_mq_realloc_hw_ctxs().
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220308073219.91173-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current code always uses default queue map and hw queue index
for figuring out the numa node for hw queue, this way isn't correct
because blk-mq supports three queue maps, and the correct queue map
should be used for the specified hw queue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220308073219.91173-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 9d497e2941 ("block: don't protect submit_bio_checks by
q_usage_counter") moved blk_mq_attempt_bio_merge and rq_qos_throttle
calls out of q_usage_counter protection. However, these functions require
q_usage_counter protection. The blk_mq_attempt_bio_merge call without
the protection resulted in blktests block/005 failure with KASAN null-
ptr-deref or use-after-free at bio merge. The rq_qos_throttle call
without the protection caused kernel hang at qos throttle.
To fix the failures, move the blk_mq_attempt_bio_merge and
rq_qos_throttle calls back to q_usage_counter protection.
Fixes: 9d497e2941 ("block: don't protect submit_bio_checks by q_usage_counter")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220308080915.3473689-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the NVMe support for this gone, there are no consumers of these hints
left, so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220304175556.407719-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When blk_mq_delay_run_hw_queues sets an hctx to run in the future, it can
reset the delay length for an already pending delayed work run_work. This
creates a scenario where multiple hctx may have their queues set to run,
but if one runs first and finds nothing to do, it can reset the delay of
another hctx and stall the other hctx's ability to run requests.
To avoid this I/O stall when an hctx's run_work is already pending,
leave it untouched to run at its current designated time rather than
extending its delay. The work will still run which keeps closed the race
calling blk_mq_delay_run_hw_queues is needed for while also avoiding the
I/O stall.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220131203337.GA17666@redhat
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_crypto_bio_prep() is called for both bio based and blk-mq drivers,
so move it out of blk-mq.c, then we can unify this kind of handling.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220216044514.2903784-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The request must be submitted to the queue it was allocated for, so
remove the extra request_queue argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold blk_cloned_rq_check_limits into its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code to stack blk-mq drivers is only used by dm-multipath, and
will preferably stay that way. Make it optional and only selected
by device mapper, so that the buildbots more easily catch abuses
like the one that slipped in in the ufs driver in the last merged
window. Another positive side effects is that kernel builds without
device mapper shrink a little bit as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, rasdaemon uses the existing tracepoint block_rq_complete
and filters out non-error cases in order to capture block disk errors.
But there are a few problems with this approach:
1. Even kernel trace filter could do the filtering work, there is
still some overhead after we enable this tracepoint.
2. The filter is merely based on errno, which does not align with kernel
logic to check the errors for print_req_error().
3. block_rq_complete only provides dev major and minor to identify
the block device, it is not convenient to use in user-space.
So introduce a new tracepoint block_rq_error just for the error case.
With this patch, rasdaemon could switch to block_rq_error.
Since the new tracepoint has the similar implementation with
block_rq_complete, so move the existing code from TRACE_EVENT
block_rq_complete() into new event class block_rq_completion(). Then add
event for block_rq_complete and block_rq_err respectively from the newly
created event class per the suggestion from Chaitanya Kulkarni.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220210225222.260069-1-shy828301@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zone append command needs special handling to update the bi_sector
field in the bio struct with the actual position of the data in the
device. It is stored in __sector field of the request struct.
Fixes: 5581a5ddfe ("block: add completion handler for fast path")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220211093425.43262-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If blk_mq_request_issue_directly() failed from
blk_insert_cloned_request(), the request will be accounted start.
Currently, blk_insert_cloned_request() is only called by dm, and such
request won't be accounted done by dm.
In normal path, io will be accounted start from blk_mq_bio_to_request(),
when the request is allocated, and such io will be accounted done from
__blk_mq_end_request_acct() whether it succeeded or failed. Thus add
blk_account_io_done() to fix the problem.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220126012132.3111551-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
bio_clone_fast() sets the cloned bio to have the same ->bi_bdev as the
source bio. This means that when request-based dm called setup_clone(),
the cloned bio had its ->bi_bdev pointing to the dm device. After Commit
0b6e522cdc ("blk-mq: use ->bi_bdev for I/O accounting")
__blk_account_io_start() started using the request's ->bio->bi_bdev for
I/O accounting, if it was set. This caused IO going to the underlying
devices to use the dm device for their I/O accounting.
Set up the proper ->bi_bdev in blk_rq_prep_clone based on the whole
device bdev for the queue the request is cloned onto.
Fixes: 0b6e522cdc ("blk-mq: use ->bi_bdev for I/O accounting")
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[hch: the commit message is mostly from a different patch from Benjamin]
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20220118070444.1241739-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cpumask_first() is a more effective analogue of 'next' version if n == -1
(which means start == 0). This patch replaces 'next' with 'first' where
things look trivial.
There's no cpumask_first_zero() function, so create it.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Commit cc9c884dd7 ("block: call submit_bio_checks under q_usage_counter")
uses q_usage_counter to protect submit_bio_checks for avoiding IO after
disk is deleted by del_gendisk().
Turns out the protection isn't necessary, because once
blk_mq_freeze_queue_wait() in del_gendisk() returns:
1) all in-flight IO has been done
2) all new IO will be failed in __bio_queue_enter() because
q_usage_counter is dead, and GD_DEAD is set
3) both disk and request queue instance are safe since caller of
submit_bio() guarantees that the disk can't be closed.
Once submit_bio_checks() needn't the protection of q_usage_counter, we can
move submit_bio_checks before calling blk_mq_submit_bio() and
->submit_bio(). With this change, we needn't to throttle queue with
holding one allocated request, then precise driver tag or request won't be
wasted in throttling. Meantime we can unify the bio check for both bio
based and request based driver.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220104134223.590803-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The low level drivers don't expect to see new requests after a
successful quiesce completes. Check the queue quiesce state within the
rcu protected area prior to calling the driver's queue_rqs().
Fixes: 3c67d44de7 ("block: add mq_ops->queue_rqs hook")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211220205919.180191-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have a list of requests in our plug list, send it to the driver in
one go, if possible. The driver must set mq_ops->queue_rqs() to support
this, if not the usual one-by-one path is used.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The batched completions only deal with non-partial requests anyway,
and it doesn't deal with any requests that have errors. Add a completion
handler that assumes it's a full request and that it's all being ended
successfully.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only user of blk_mq_hw_ctx blk_mq_hw_ctx argument is
blk_mq_rq_inflight().
Function blk_mq_rq_inflight() uses the hctx to find the associated request
queue to match against the request. However this same check is already
done in caller bt_iter(), so drop this check.
With that change there are no more users of busy_iter_fn blk_mq_hw_ctx
argument, so drop the argument.
Reviewed-by Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Link: https://lore.kernel.org/r/1638794990-137490-2-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei