Add bindings for the QTI WCN6855 chipset.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add binding document for NXP bluetooth chipsets attached over UART.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add compatible string for RTL8821CS for existing Realtek Bluetooth
driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 88W8997 bluetooth module supports setting the max-speed property.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the documentation with the device tree binding for the Marvell
88W8997 bluetooth device.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Makes alphascale-asm9260 dt bindings adhere to the dt json-schema
by replacing txt file with yaml file.
Signed-off-by: Om Parikh <hack3r-0m@proton.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230418051446.24288-1-hack3r-0m@proton.me
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Required properties should be listed in "required:" block. Since
interrupts are already there, the dependency of interrupt-names on the
interrupts can be simplified.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230415095112.51257-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
There is no need to specify minItems when they are equal to maxItems,
because it is implied by maxItems.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230415095112.51257-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Two conversions to DT schema of GPIO watchdog binding happened and came
through different trees. Merge them into one:
1. Combine maintainers,
2. Use more descriptive property descriptions and constraints from
gpio-wdt.yaml,
3. Switch to unevaluatedProperties:false, to allow generic watchdog
properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230415095112.51257-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add a DT binding for the MT6735 top reset generation unit/watchdog timer.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230302124015.75546-2-y.oudjana@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add bindings to describe the watchdog for the StarFive JH7100/JH7110 SoC.
And Use JH7100 as first StarFive SoC with watchdog.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230314132437.121534-2-xingyu.wu@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add compatible string for mediatek,mt7981-wed as MT7981 also supports
RX WED just like MT7986, but needs a different firmware file.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralink RT2880 Watchdog bindings used text format, so migrate them to YAML.
There are some additions to the binding that were not in the original
txt file. This binding is used in RT2880, RT3050, RT3352, RT3883, RT5350,
and MT7620 SoCs. To properly align binding with driver code we need to add
to the schema 'clocks' and 'resets' properties.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230302085914.2858645-1-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
* fix some Fine Time Measurement (FTM) frames not being bufferable
* flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
* preparation for Wi-Fi 7 EHT and multi-link support
rtw88
* SDIO bus support
* RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
* framework firmware backwards compatibility
brcmfmac
* Cypress 43439 SDIO support
mt76
* mt7921 P2P support
* mt7996 mesh A-MSDU support
* mt7996 EHT support
* mt7996 coredump support
wcn36xx
* support for pronto v3 hardware
ath11k
* PCIe DeviceTree bindings
* WCN6750: enable SAR support
ath10k
* convert DeviceTree bindings to YAML
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmRCaTURHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvcRwf+NcLS4HbmqGZhBxl2LZVZ6AFCBM4ijDlO
pxdMiC4UxT+UApY1/9YXo0VS97M7paDJH+R/g1HcTvvKURHCmsdhYHm+R1MH+/uD
r8RfvJg4VtNnlUpsJh9jxt+e697KP15M7DF0sFlQzdIoTUl13Hp7YhI76zunAbAN
u1FBcVVJiCcJWbLolMzqAeBMUWUEG+GtHF6Zn5kChVU/p1nmwJMPUG3Qvb61a7Yc
BM1pQX8jQ8PBj+VrGPGvqX0BOdbxq0evauYScq2oTOhQ1fzTNWOsI1yI7AwApptR
itwQ2t1UK/C/EWpvWIBSd0nit1uwSx0Zsu/nSZlbKbrvIFwd5XnfwQ==
=Irrd
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.4
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
- fix some Fine Time Measurement (FTM) frames not being bufferable
- flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
- preparation for Wi-Fi 7 EHT and multi-link support
rtw88
- SDIO bus support
- RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
- framework firmware backwards compatibility
brcmfmac
- Cypress 43439 SDIO support
mt76
- mt7921 P2P support
- mt7996 mesh A-MSDU support
- mt7996 EHT support
- mt7996 coredump support
wcn36xx
- support for pronto v3 hardware
ath11k
- PCIe DeviceTree bindings
- WCN6750: enable SAR support
ath10k
- convert DeviceTree bindings to YAML
* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
wifi: rtw88: Update spelling in main.h
wifi: airo: remove ISA_DMA_API dependency
wifi: rtl8xxxu: Simplify setting the initial gain
wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
wifi: rtl8xxxu: Don't print the vendor/product/serial
wifi: rtw88: Fix memory leak in rtw88_usb
wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
wifi: rtw88: rtw8821c: Fix rfe_option field width
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: 8822c: add iface combination
wifi: rtw88: handle station mode concurrent scan with AP mode
wifi: rtw88: prevent scan abort with other VIFs
wifi: rtw88: refine reserved page flow for AP mode
wifi: rtw88: disallow PS during AP mode
wifi: rtw88: 8822c: extend reserved page number
wifi: rtw88: add port switch for AP mode
wifi: rtw88: add bitmap for dynamic port settings
wifi: rtw89: mac: use regular int as return type of DLE buffer request
wifi: mac80211: remove return value check of debugfs_create_dir()
...
====================
Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enum value "atest_usb2" appears twice. Remove the duplicate. The
meta-schema normally catches these, but schemas under "$defs" was not
getting checked. A fix for that is pending.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150613.1528233-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #brcm,iproc-rng200
Link: https://lore.kernel.org/r/20230327170153.4105594-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Use correct PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register for v2.7.0
(Manivannan Sadhasivam)
- Remove "PCIE20_" prefix from register definitions (Manivannan Sadhasivam)
- Sort registers and bitfield declarations (Manivannan Sadhasivam)
- Convert to GENMASK and FIELD_PREP (Manivannan Sadhasivam)
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 (Manivannan
Sadhasivam)
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 (Manivannan Sadhasivam)
- Rename qcom_pcie_config_sid_sm8250() to be non SM8250-specific
(Manivannan Sadhasivam)
- Add DT "mhi" register region for supported SoCs (Manivannan Sadhasivam)
- Expose link transition counts via debugfs to help debug low power issues
(Manivannan Sadhasivam)
- Support system suspend and resume; reduce interconnect bandwidth and turn
off clock and PHY if there are no active devices (Manivannan Sadhasivam)
- Enable async probe by default to reduce boot time (Manivannan Sadhasivam)
- Add Manivannan Sadhasivam as qcom DT binding maintainer, replacing
Stanimir Varbanov (Manivannan Sadhasivam)
- Add DT binding and driver support for Qcom SDX55 SoC (Manivannan
Sadhasivam)
- Add DT binding and driver support for SM8550 SoC (Abel Vesa)
- Document msi-map and msi-map-mask DT properties (Manivannan Sadhasivam)
* pci/controller/qcom:
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI: qcom: Expose link transition counts via debugfs
dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
PCI: qcom: Use macros for defining total no. of clocks & supplies
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
PCI: qcom: Use lower case for hex
PCI: qcom: Add missing macros for register fields
PCI: qcom: Use bitfield definitions for register fields
PCI: qcom: Sort and group registers and bitfield definitions
PCI: qcom: Remove PCIE20_ prefix from register definitions
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230322173501.3970991-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170205.4106310-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
'deprecated' is a boolean type which should have a value of 'true' rather
than 'yes'.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150643.1529895-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The trailing "/" in "lvds.yaml/#" is not a valid JSON pointer. The existing
jsonschema package allows it, but coming changes make allowed "$ref" URIs
stricter.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230418150658.1535120-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
-----BEGIN PGP SIGNATURE-----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=VJxz
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq/ARM updates for 6.4 from Viresh Kumar:
"- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)."
ath.git patches for v6.4. Major changes:
wcn36xx
* support for pronto v3 hardware
ath11k
* PCIe DeviceTree bindings
* WCN6750: enable SAR support
ath10k
* convert DeviceTree bindings to YAML
This adds a dedicated devicetree binding for the Maxim DS2482/DS2484
I2C to 1-W bridges, which can be extended later for further features
(e.g. sleep mode control GPIO). Since one wire is a bus, child nodes
needs to be allowed here.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Link: https://lore.kernel.org/r/20230406103137.6092-2-stefan.wahren@chargebyte.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the PCA9532 LED Dimmer to dtschema.
While at it, update the example to match recommended node names and
the link to the product datasheet. Also add GPIO properties since
the driver allows to use unused pins as GPIOs.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230412140552.451527-1-w.egorov@phytec.de
Add qcom,pmk8550-pwm compatible string for the Qualcomm Technologies, Inc.
PMK8550 PMIC which has two high resolution PWM channels.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230407223849.17623-2-quic_amelende@quicinc.com
Add a new 'snps,parkmode-disable-hs-quirk' DT quirk to dwc3 core for
disable the high-speed parkmode.
For some USB wifi devices, if enable this feature it will reduce the
performance. Therefore, add an option for disabling HS park mode by
device-tree.
In Synopsys's dwc3 data book:
In a few high speed devices when an IN request is sent within 900ns of the
ACK of the previous packet, these devices send a NAK. When connected to
these devices, if required, the software can disable the park mode if you
see performance drop in your system. When park mode is disabled,
pipelining of multiple packet is disabled and instead one packet at a time
is requested by the scheduler. This allows up to 12 NAKs in a micro-frame
and improves performance of these slow devices.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20230419020044.15475-2-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qualcomm MSM8974 comes with USB HS phy in two variants, although final
DTS chooses only one. Allow such combination in the ChipIdea USB2
bindings and also disallow any other properties in the ulpi node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230420065051.22994-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
utmi clock is typically provided by PHY output. Add this optional clock,
as the core could use other clocks depending on the SoC where it's used.
This is needed on stm32mp15, when using the integrated full-speed PHY.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230414084137.1050487-3-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add optional clock 'frmcnt_ck' used on 4nm or advanced process SoC
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20230407062406.12575-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A JSON pointer reference (the part after the "#") must start with a "/".
Conversely, references to the entire document must not have a trailing "/"
and should be just a "#". The existing jsonschema package allows these,
but coming changes make allowed "$ref" URIs stricter and throw errors on
these references.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230418150628.1528480-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the ath10k bindings to YAML.
Dropped properties that are absent at the current state of mainline:
- qcom,msi_addr
- qcom,msi_base
Somewhat based on the ath11k bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230406-topic-ath10k_bindings-v4-1-9f67a6bb0d56@linaro.org
Add bindings for the temperature sensor on the StarFive JH7100 and
JH7110 SoCs.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230321022644.107027-2-hal.feng@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This pull request contains the interconnect changes for the 6.4-rc1 merge
window, which this time are mostly cleanups.
Core changes:
interconnect: Skip call into provider if initial bw is zero
interconnect: Use of_property_present() for testing DT property presence
interconnect: drop racy registration API
interconnect: drop unused icc_link_destroy() interface
Driver changes:
interconnect: qcom: Drop obsolete dependency on COMPILE_TEST
interconnect: qcom: drop obsolete OSM_L3/EPSS defines
interconnect: qcom: osm-l3: drop unuserd header inclusion
interconnect: qcom: rpm: drop bogus pm domain attach
interconnect: qcom: rpm: make QoS INVALID default
interconnect: qcom: rpm: Add support for specifying channel num
interconnect: qcom: Sort kerneldoc entries
dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible
dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=By6c
-----END PGP SIGNATURE-----
Merge tag 'icc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.4
This pull request contains the interconnect changes for the 6.4-rc1 merge
window, which this time are mostly cleanups.
Core changes:
interconnect: Skip call into provider if initial bw is zero
interconnect: Use of_property_present() for testing DT property presence
interconnect: drop racy registration API
interconnect: drop unused icc_link_destroy() interface
Driver changes:
interconnect: qcom: Drop obsolete dependency on COMPILE_TEST
interconnect: qcom: drop obsolete OSM_L3/EPSS defines
interconnect: qcom: osm-l3: drop unuserd header inclusion
interconnect: qcom: rpm: drop bogus pm domain attach
interconnect: qcom: rpm: make QoS INVALID default
interconnect: qcom: rpm: Add support for specifying channel num
interconnect: qcom: Sort kerneldoc entries
dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible
dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support
dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible
interconnect: qcom: Sort kerneldoc entries
interconnect: qcom: rpm: Add support for specifying channel num
interconnect: qcom: rpm: make QoS INVALID default
interconnect: qcom: rpm: drop bogus pm domain attach
interconnect: drop unused icc_link_destroy() interface
interconnect: drop racy registration API
interconnect: Use of_property_present() for testing DT property presence
interconnect: qcom: osm-l3: drop unuserd header inclusion
interconnect: qcom: drop obsolete OSM_L3/EPSS defines
interconnect: Skip call into provider if initial bw is zero
interconnect: qcom: Drop obsolete dependency on COMPILE_TEST
Document support for LEDs node in phy and add an example for it.
PHY LED will have to match led pattern and should be treated as a
generic led.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add LEDs definition example for qca8k Switch Family to describe how they
should be defined for a correct usage.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document support for LEDs node in ethernet-controller.
Ethernet Controller may support different LEDs that can be configured
for different operation like blinking on traffic event or port link.
Also add some Documentation to describe the difference of these nodes
compared to PHY LEDs, since ethernet-controller LEDs are controllable
by the ethernet controller regs and the possible intergated PHY doesn't
have control on them.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lists (items) with one item should be just const or enum because it is
shorter and simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230414104230.23165-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Lists (items) with one item should be just enum because it is shorter,
simpler and does not confuse, if one wants to add new entry with a
fallback. Convert all of them to enums. OTOH, leave unused "oneOf"
entries in anticipation of further growth of the entire binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230414083311.12197-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
video-interface.txt does not exist anymore, as it has been converted
to video-interfaces.yaml.
Instead of referencing video-interfaces.yaml multiple times,
pass it as a $ref to the schema.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230412175800.2537812-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230327170146.4104556-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add a compatible for the Power Domain Controller on SA8775p platforms.
Increase the number of PDC pin mappings.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230417094635.302344-1-brgl@bgdev.pl
Signed-off-by: Rob Herring <robh@kernel.org>
Remove compatible for stih415/stih416 and stid127 which are
no more supported.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230416195857.61284-1-avolmat@me.com
Signed-off-by: Rob Herring <robh@kernel.org>
Remove bindings for the stih415/stih416/stid127 since they are
not supported within the kernel anymore.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230416190950.18929-1-avolmat@me.com
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327170114.4102315-1-robh@kernel.org
The supplies for PM6150L and PM8150L are the same, so they can be part
of one if-then block, for smaller code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230418071734.5706-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the WM8728 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230417204323.137681-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the WM8737 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230417212400.161796-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to:
stmmac_platform.c: stmmac_probe_config_dt
stmmac_main.c: stmmac_dvr_probe
dwmac controller may require one (stmmaceth) or two (stmmaceth+ahb)
reset signals, and the maxItems of resets/reset-names is going to be 2.
The gmac of Starfive Jh7110 SOC must have two resets.
it uses snps,dwmac-5.20 IP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add dwmac-5.20 IP version to snps.dwmac.yaml
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PM8550 is different than PM8550VE/VS, because the latter has much
smaller amount of supplies (l1-3 and s1-6) and regulators. The PM8550
has on the other hand one pin for vdd-l1-l4-l10 supplies. Correct the
if:then: clause with their supplies.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230327080626.24200-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The AMD Pensando Elba SoC has integrated the DW APB SPI Controller
Signed-off-by: Brad Larson <blarson@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230410184526.15990-5-blarson@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The main and only new addition this time around is the support for
unidirectional mailbox channels. SCMI communicates between the agent
and the platform using one bidirectional 'a2p' channel used by the agent
to send SCMI commands and synchronously receive the related replies, and
an optional 'p2a' unidirectional channel used to asynchronously receive
delayed responses and notifications emitted from the platform.
In order to support platforms that support only unidirectional mailbox
hardware channels, the existing bindings are extended to support the
same. Both bidirectional and unidirectional channels support for the
SCMI mailbox can coexist. The correct and effective combination of
defined 'mboxes' and 'shmem' descriptors determines the type of the
mailbox channel.
This also contains a fix for the transfers allocation on Rx channel
especially when the base protocol doesn't use Rx channel while some
of the protocols can have dedicated Rx channels.
-----BEGIN PGP SIGNATURE-----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=8/Bb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=maaU
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.4
The main and only new addition this time around is the support for
unidirectional mailbox channels. SCMI communicates between the agent
and the platform using one bidirectional 'a2p' channel used by the agent
to send SCMI commands and synchronously receive the related replies, and
an optional 'p2a' unidirectional channel used to asynchronously receive
delayed responses and notifications emitted from the platform.
In order to support platforms that support only unidirectional mailbox
hardware channels, the existing bindings are extended to support the
same. Both bidirectional and unidirectional channels support for the
SCMI mailbox can coexist. The correct and effective combination of
defined 'mboxes' and 'shmem' descriptors determines the type of the
mailbox channel.
This also contains a fix for the transfers allocation on Rx channel
especially when the base protocol doesn't use Rx channel while some
of the protocols can have dedicated Rx channels.
* tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
firmware: arm_scmi: Fix xfers allocation on Rx channel
firmware: arm_scmi: Use the bitmap API to allocate bitmaps
firmware: arm_scmi: Fix device node validation for mailbox transport
firmware: arm_scmi: Fix raw coexistence mode behaviour on failure path
firmware: arm_scmi: Remove duplicate include header inclusion
firmware: arm_scmi: Return a literal instead of a variable
firmware: arm_scmi: Clean up a return statement in scmi_probe
Link: https://lore.kernel.org/r/20230417145743.1904318-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
(Sebastian Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmQ5RcEACgkQqDIjiipP
6E+jqAf/Zl/FYMwkyfnnbB1PVG1u2IuJMFYrpRK8rCl+WLgcM3FXqsUaQaKhwdvM
9+qNtmCVRPPvDIkLpcwnD/bzJJfWW40NwFTEpGHf06LztGBXzqvbyKZjlMO9CeON
jfxAf/s2xuX0bCRFE+x8BX4WHRir7j7Ivw6ATk40mvgZsedAwnMI6L5P6Mw7gIu3
cpYGvM8rt0By+5VndVbuEDm9GRcOVd7ZgIFUMNUGvHBZ8IltkWmovmqWjeVIkW7Q
5gWwspSWPfe4o4RB0oUMNWNtqFOps06n+sURvrP1q8Nv9KcK5rL4ricDXoZK6eqk
IbdHvP19rPscVdN3VpbFBBt2Dm3KQA==
=yfad
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano:
"- Do preparating cleaning and DT bindings for RK3588 support
(Sebastian Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)"
* tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
LEDs can be in low-active mode, driver already supports it, but
documentation is missing. Add documentation for the dt property.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Convert the WM8753 audio codec bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230414223801.1106550-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AMD Pensando Elba ARM 64-bit SoC is integrated with this IP and
explicitly controls byte-lane enables.
Signed-off-by: Brad Larson <blarson@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230410184526.15990-3-blarson@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add Xilinx Versal Net compatible to support eMMC 5.1 PHY.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230403102551.3763054-2-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Image Sensing Interface (ISI) combines image processing pipelines
with DMA engines to process and capture frames originating from a
variety of sources. The inputs to the ISI go through Pixel Link
interfaces, and their number and nature is SoC-dependent. They cover
both capture interfaces (MIPI CSI-2 RX, HDMI RX) and memory inputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document VSPD found in RZ/V2L SoC. The VSPD block is identical to RZ/G2L
SoC and therefore use RZ/G2L fallback to avoid any driver changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document FCPVD found in RZ/G2L alike SoCs. FCPVD block is similar to
FCP for VSP found on R-Car SoC's . It has 3 clocks compared to 1
clock on fcpv. Introduce new compatibles renesas,r9a07g044-fcpvd
for RZ/G2{L,LC} and renesas,r9a07g054-fcpvd for RZ/V2L to handle this
difference.
The 3 clocks are shared between du, vspd and fcpvd. No driver changes
are required as generic compatible string "renesas,fcpv" will be used
as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document support for the VIN module in the Renesas V4H (r8a779g0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document support for the CSI-2 module in the Renesas V4H (r8a779g0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document support for the ISP module in the Renesas V4H (r8a779g0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
smaller coding style changes
mtk-mutex:
- add support for mt8365 display and mt8195 VPP mutex
- add support for more then 32 mods
- use module_platform_driver instead of open coding
mtk-mmsys:
- add support for mt8195 RSZ switching
- add remove function
- use module_platform_driver instead of open coding
- split out mt8173 routing table from the legacy table
- bump up resets in mt8173 to 64
- add support for mt6795 (Helio X10)
- clean-up IS_REACHABLE code for cmdq
-----BEGIN PGP SIGNATURE-----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=8k5F
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DkhA
-----END PGP SIGNATURE-----
Merge tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers
mtk-svs:
smaller coding style changes
mtk-mutex:
- add support for mt8365 display and mt8195 VPP mutex
- add support for more then 32 mods
- use module_platform_driver instead of open coding
mtk-mmsys:
- add support for mt8195 RSZ switching
- add remove function
- use module_platform_driver instead of open coding
- split out mt8173 routing table from the legacy table
- bump up resets in mt8173 to 64
- add support for mt6795 (Helio X10)
- clean-up IS_REACHABLE code for cmdq
* tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits)
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
soc: mediatek: mutex: Use dev_err_probe()
soc: mediatek: mtk-mmsys: Add support for MT6795 Helio X10
soc: mediatek: mtk-mmsys: Change MT8173 num_resets to 64
soc: mediatek: mtk-mmsys: Split out MT8173 mmsys DDP routing table
soc: mediatek: Cleanup ifdefs for IS_REACHABLE(CONFIG_MTK_CMDQ)
soc: mediatek: cmdq: Add inline functions for !CONFIG_MTK_CMDQ
soc: mediatek: mtk-mutex: Use module_platform_driver() macro
soc: mediatek: mtk-mutex: Replace max handles number with definition
soc: mediatek: mtk-mutex: Compress of_device_id array entries
soc: mediatek: mtk-mmsys: Add MODULE_DEVICE_TABLE() to allow auto-load
soc: mediatek: mtk-mmsys: Compress of_device_id array entries
soc: mediatek: mtk-mmsys: Use module_platform_driver() macro
soc: mediatek: mtk-mmsys: Add .remove() callback
dt-bindings: soc: mediatek: add display mutex for MT8365 SoC
dt-bindings: soc: mediatek: specify which compatible requires clocks property
soc: mediatek: mtk-svs: add thermal voltage compensation if needed
soc: mediatek: mtk-svs: fix passing zero to 'PTR_ERR'
soc: mediatek: mtk-svs: delete node name check
soc: mediatek: mutex: support MT8195 VPPSYS
...
Link: https://lore.kernel.org/r/bc9f7a74-ce12-b323-021c-ff2c0473e979@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
-----BEGIN PGP SIGNATURE-----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=vVPv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HFrk
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
* tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: Add base qrb4210-rb2 board dts
arm64: dts: qcom: sm8550: add Soundwire controllers
arm64: dts: qcom: sm8250: Add GPU speedbin support
arm64: dts: qcom: sm8150: Add GPU speedbin support
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi
arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs
arm64: dts: qcom: sm6115: Add RMTFS
arm64: dts: qcom: sm6115-j606f: Add ramoops node
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
arm64: dts: MSM8953: Add lpass nodes
arm64: dts: MSM8953: Add mpss nodes
arm64: dts: MSM8953: Add wcnss nodes
arm64: dts: qcom: sm8350: remove superfluous "input-enable"
arm64: dts: qcom: sm8150: remove superfluous "input-enable"
arm64: dts: qcom: apq8016: remove superfluous "input-enable"
arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
...
Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds IPA definition to the sdx65 platform, and brings a few
stylistic changes to sdx55 and sdx65.
Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and
RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on
IPQ5332. These are all ARM64 boards, despite being introduced through
the ARM32 pull request...
-----BEGIN PGP SIGNATURE-----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=KMpQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=TaSa
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm ARM32 DeviceTree updates for v6.4
This adds IPA definition to the sdx65 platform, and brings a few
stylistic changes to sdx55 and sdx65.
Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and
RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on
IPQ5332. These are all ARM64 boards, despite being introduced through
the ARM32 pull request...
* tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 board
ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node
ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts
dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 family
dt-bindings: arm: qcom: Document xiaomi,laurel-sprout board
dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board
ARM: dts: qcom: sdx65: move status properties to end of nodes
ARM: dts: qcom: sdx65: add IPA information
Link: https://lore.kernel.org/r/20230414023723.2411793-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
-----BEGIN PGP SIGNATURE-----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=ZyN2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5d90ACgkQYKtH/8kJ
UifbkRAA0tH8h0ehQRsfgaijE+KNM5IOwi7iszD7NObNG+5Nal5QO6H9CvrEEbgv
4c6qwkC7F+ZN+zTVeKTufqZ6/zkylW+AMzL4UuAl5BxhMMrWzsg1NR1+NlbKssEb
EBbLll7uxohuK79JNjmor/VV+zJX+hOyAhsf6yo6gpYFiJdgrRGwWVFVflNTNQis
mpw5U4SyFNo4lq/HDERuxWbbsTl+VmoCeezCRgolaVkq4RTeMNcIxbm/kJ+t9ela
HNm6mpJWqUUGeNpos5VdCqLApxBQgYmwz1mPHTQfC0V9v8YlVnTTKVmw4lHoGnZp
ADN7iQSqqpsOLjML3+7HfQ8FWTTpj6FbE+vcSTiLjnstv9oDYd2wf9FPzJqcDVTl
MucZVPk75zutakDuHOxizdfSTXPnpyEXnpnEUla6E+BntkB5eCTz45NN9B35gowA
fY437FQ95eY2mV2vpya91rH2Rtw5BJbZW6jsw+WxT29A67LBa+sJrTayDNzYLuUz
GjSb2vmRr2r3WG1jy8QQxVC3R/t4rlqXBnmJ91nHNIgrGl5ExrIEt+IDRsqHlS7T
V1xX4fl9Ge2zfZeoFPFhgIBpPtvEkW5mUKIjRX6EBvRnG9+T8CWuWSnJDuFa6AMZ
kxAhqUojmDO8f1E/BPiHHCP31dfUrMOVor0fu9qu7o8/H/WPo04=
=OcHF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
-----BEGIN PGP SIGNATURE-----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=YUEe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=a7tv
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
* tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits)
dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3)
dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd.
ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible
ARM: dts: qcom: sdx55-t55: Move "status" property down
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
dt-bindings: arm: qcom: Add ipq9574 compatible
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
dt-bindings: qcom: add ipq5332 boards
...
Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQ2CqEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM62WAf/cJ7W0MnV864M7GUBFKo4pO3brNFl
yumpJsbTtCDc5tl4h/UiLQeEq5rY3zudX8+nnMlkMT4uzSxjATmUMvLCnYb8Y8B8
sC2od3OXOn2xeR8XDL1OYTYFZ2NTj+V9n6IKd4y5DYfNSywLevUTenXG8JelC/OI
TAyMI1D+gjaB3dOs6V5Xoj7Pe9O5ImG3+Ev6scUGfEc95cDgJAeUxZ6cET2g55rN
0QUSlTFdNjw8S+DMEJcEIgiwg9kSJaSUJnVmSmijv6x0VE0Alo9ZBxChP8fY6Hve
GR0ks0MdhGgQWb4Gt8DdCkP5HakoKzVw0keUapiv2y0u/YqMdR540lphzQ==
=MLcb
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.4:
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
* tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples
dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3
dt-bindings: arm: fsl: add compatible string for Tolino Vision
dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+
dt-bindings: arm: fsl: Add colibri-imx8x carrier boards
dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example
dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name
dt-bindings: arm: fsl: Fix copy-paste error in comment
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZC8o6wAKCRB4tDGHoIJi
0pdpAP0Y0qkT5tZSV635h2XOrWBpW3D3Vpx6+LGmw2mRjhHVPgD+Mfe0LkP6Dbq3
JS6fMISbgMAG/8dqcys/e0gmHksYJAk=
=FsQ1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5U/EACgkQYKtH/8kJ
Uif0hhAAxHk3QfPh5BF/1TzzUdeOgXuCiT9sQWHB9VtX1N03nwRoMETbFPRxjI1v
P/KckzA5nxVA8q8Me+hb5nRQFwiDOVsH5cBMMnPQ46NGImEaptZ7Jwf1/RT1yk6n
eBg9vRipRhD56CYTE20iasjhwjVohljvce58Rg61oXQ2lK1dKxnIjPeDfypPz9/p
149/wWUy8e6pGIciDw25hKGuxZiXHlO4OwdL0yWggXl/iuBi8l7gAQAcCv7vWNS3
oM8t6n/o1Vr0L+MBJtBBKPmuPKu7u54+RWsaKrO3zyiRRKGjI/VMZOi5ZKcooynL
ThAGlqCIrnXu25XJ2V7l95FDTdPeTljhh1FRyOIJjvzlCX9QBdr5suQU3q9zr+Mf
ZdE5baezkwsTF+1Hi/Yc65gCAtUfQmGG88/TE1krFw4aaE1xVr7nAfDCpdLcCzDS
D/1b9/4h/2B2dJIdBO3VdzKG4bTcaK3Eb6TX6z2zIZ6stNHcoDxr6dcQXdiGAoYu
/I8zAX3zTo5Q8E0Y67h7ao4dxDqxVUIop/92OJeD3X3IkcJreXEuxBEEsRvs53P6
/tqAsG5zPpW5GwfeopUHfFUYJRn+sLrqQ9zD+k4InwiCSlR/tJ7tBMXqyRsQUEyR
P336MHjq10PRVmgKjsPpTx87K9f39Qgh6doHWAKBfMo/gSQ8z9U=
=l6EI
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.4
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
riscv: dts: microchip: fix the mpfs' mailbox regs
riscv: dts: microchip: add mpfs specific macb reset support
Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
-----BEGIN PGP SIGNATURE-----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=qCDN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xfIt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a single patch that drops unneeded quotes from various Tegra-
related device tree bindings.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmQuvdQTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoXTrD/9wW0ifyBTaCRqugnnYW6juAe4JsXGe
GUDVkEwZWSon1BmHu+vivLUaH9qgFTAM6qRWdI0WaB3Oyuedk+HTyj2bDkrtqJAa
LeT4zooyOxwpsMPiXCr1cLJmCLkf9GjMZLHVnkCyXT0jdvinXfPZ4vWk+oFeYjH4
1cXVhZ0ESoSkDsrUCN8HxZh9tLPrWPGNZL5QiFFzQTiiUF26soAvJNP6jLDipuRc
8vRPvjKtEU3FBIsUgHlTY3kRNpB8oaLlayVnSNSdcGYceulmBAsE0+rwoqo4an1s
aSn8WKxOsDXhrrHnKqmMCW3SEDJKrO/nwINO2+nHnJsv99MjpJB6JOOnSnXeG71C
0Gms0J3upb4eBxVzJkejZAY++6VyrIQm7s0UNiw4RvgKK3HWwlsfdBFjLhXprkv5
SU3Q5vplLf7QlVtzlheQgclRPOZC7WLmuTuGnvrqfxUe743AAb+FTRqt2/4rcCHM
E1MdZGMolD7d6RilekM0vO0vIH+drL0hOjhXhaNkrKNsCCvCm2+Ev3SYNmCi3wXl
j0jC2lLjztF0FxNksM+cjX7H1+Zrdr4BSbQaluX/49GqYXrfiw8GdZcMiVtLupw+
MkvlraJPXEvmkMW1gcvED2agxxmKM/6cXiQG3x2XLcwyEtT21gmXaP6y3ZFbdibl
7hh5YKwxT2grIQ==
=EW94
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PQVQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.4-rc1
This is a single patch that drops unneeded quotes from various Tegra-
related device tree bindings.
* tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: nvidia: Drop unneeded quotes
Link: https://lore.kernel.org/r/20230406124804.970394-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmQtKzsQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD10PsD/9dMtGyTtu6gA61AHWbPID3cWUOXgRY5kmE
iDhC+VokQ8yLfhLdoTLrFbgoQ4wKDqvJ1XizS5zlRpoMnSt76YRzz3PV6C0wopS6
8rrMBUWaN3rXJqcoD+kAheaYiEQXIRMs0xmQLHYGqqXo3+kxYI/riSOcdA7KU2A8
iCtPmAt9ovLmwQ+zAVAvd05V3J1k4+1U3KdUKsZFbpEs0ypgb05+8FKHlLr/jJk3
3yHDCqUEA55GslU0SJyn4RBL4RbxI7DYjm4KsjBqdtHf6OeXZI9vixinzvPDO7qC
vli+BDxnoI38n1KkmjRmeAvhT4LQWNslQFLPEUCu7W8FUO9oklZGsQvCcbk0DXqo
c9v6N2vvjRNUc5x+ZLOgY3HLoB4Dyu8Ujg9AEok8ROVHL8+SchNOxWroeBsd8uC4
HzdxXTSQOhY5mXFWXzcMtmSwsTWWShLFAOvBFkN4Cl5jr11bHR1ABHEv/M2zhlhm
8A2idy/dh1GQiplWaXvhCJkzhO8pA9V42QhCRWD8AUscBRcZ4y3kPMu1JiFsv1vz
SLKrtPpEXCuL8R+fZnSga9W1xXi5KrggxPKDTeESLNpSXwow/pvZasMZ9NyVM7jP
Wr87Q7xFhbqqK2hE2ESGOA+eR6aNctAUhCs11R/BrCZ57pMScfy3tQwJBEs832tu
bHRPw9gSuw==
=PGBg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nYVY
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=GkR1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kJMa
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new binding and a dedicated driver for the Qualcomm
Inline-Crypto-Engine (ICE), in order to support a single shared instance
between SDHCI and UFS, found in recent platforms.
RSC version check is updated to support minor revisions of v3 of the ip
block, the SMD-RPM interface is transitioned to GFP_ATOMIC to avoid the
shrinker to kick in underneath the GPU and QCM2290 support is added to
the SCM binding.
-----BEGIN PGP SIGNATURE-----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=aZXM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=D6Q8
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.4
This introduces a new binding and a dedicated driver for the Qualcomm
Inline-Crypto-Engine (ICE), in order to support a single shared instance
between SDHCI and UFS, found in recent platforms.
RSC version check is updated to support minor revisions of v3 of the ip
block, the SMD-RPM interface is transitioned to GFP_ATOMIC to avoid the
shrinker to kick in underneath the GPU and QCM2290 support is added to
the SCM binding.
* tag 'qcom-drivers-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
Link: https://lore.kernel.org/r/20230414024302.2411985-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
-----BEGIN PGP SIGNATURE-----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=Bo2w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wYqZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.4
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
* tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
dt-bindings: firmware: document Qualcomm SC8180X SCM
dt-bindings: sram: qcom,imem: document SM6375 IMEM
soc: qcom: icc-bwmon: Handle global registers correctly
soc: qcom: icc-bwmon: Remove unused struct member
soc: qcom: smsm: Use dev_err_probe()
firmware: qcom_scm: Add SM6375 compatible
soc: qcom: llcc: Add configuration data for SM7150
dt-bindings: arm: msm: Add LLCC for SM7150
dt-bindings: soc: qcom: smd-rpm: re-add missing qcom,rpm-msm8994
soc: qcom: pmic_glink: register ucsi aux device
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible
firmware: qcom_scm: Clear download bit during reboot
dt-bindings: soc: qcom: aoss: Document QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: Update QDU1000/QRU1000 compatible
dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
firmware: qcom_scm: Use fixed width src vm bitmap
dt-bindings: firmware: qcom,scm: document IPQ5332 SCM
dt-bindings: scm: Add compatible for IPQ9574
soc: qcom: rpmpd: Remove useless comments
...
Link: https://lore.kernel.org/r/20230410152421.4477-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the binding doc to dt schema, and also fixed the
example from fixed-regulator to regulator-fixed.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407075259.1593739-1-peng.fan@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add the compatible for the Qualcomm Graphics Clock control module present
on sa8775p platforms. It matches the generic QCom GPUCC description. Add
device-specific DT bindings defines as well.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411125910.401075-2-brgl@bgdev.pl
When this property is set, the remoteproc is used to boot the
LPASS and therefore qdsp6ss clocks would be used to bring LPASS
out of reset, hence they are directly controlled by the remoteproc.
This is a cleanup done to handle overlap of regmap of lpasscc
and adsp remoteproc blocks.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-2-quic_mohs@quicinc.com
- Fix interaction between fw_devlink and DT overlays causing
devices to not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
-----BEGIN PGP SIGNATURE-----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=x2A8
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix interaction between fw_devlink and DT overlays causing devices to
not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
treewide: Fix probing of devices in DT overlays
dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
The Cadence I2C controller has an external reset that needs to be
de-asserted before the I2C controller can be accessed.
Document the `resets` devicetree property that can be used to describe how
the reset signal is connected.
While the reset signal will always be present in hardware the devicetree
property is kept optional for backwards compatibility with existing systems
that do not specify the reset property and where the reset signal might not
be controlled by operating system.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add compatible string for the I2C controllers found in the MediaTek
MT7981 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The sc8280xp has a new version of the ETHQOS hardware in it, EMAC v3.
Add a compatible for this.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
In doing so add a new property for iommus since newer platforms support
using one, and without such make dtbs_check fails on them.
While at it, also update the MAINTAINERS file to point to the yaml
version of the bindings.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[halaney: Remove duplicated properties, add MAINTAINERS and iommus]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As commit fc191af1bb ("net: stmmac: platform: Fix misleading
interrupt error msg") noted, not every stmmac based platform
makes use of the 'eth_wake_irq' or 'eth_lpi' interrupts.
So, update the 'interrupt-names' inside 'snps,dwmac' YAML
bindings to reflect the same.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After commit f1ad5338a4 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges of the leaf node doesn't work. Remove
it for jpeg here.
Currently there is only mt8195 jpeg node has this property in upstream,
and it already uses parent-child node, this property did work. But instead,
MediaTek iommu will control the masters' iova ranges by the master's
larb/port id internally, then this property is unnecessary.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Bin Liu <bin.liu@mediatek.com>
Cc: kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
Cc: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230411093144.2690-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit f1ad5338a4 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges of the leaf node doesn't work. Remove
it for vcodec here.
For mediatek,vcodec-decoder.yaml and mediatek,vcodec-encoder.yaml,
this property is in the leaf node, it is invalid as the above comment.
Currently there is only mt8195 VENC node has this property in upstream.
Indeed, VENC is affected, but it is not a fatal issue. Originally it
expects its iova range locate at 4GB-8GB. However after that commit, its
expectation doesn't come true, it will fall back to 0-4GB iova and also
could work well.
Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230411093144.2690-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The DMA controller needs two reset items to work properly on JH7110 SoC,
so there is need to constrain the items' value to 2, other platforms
have 1 reset item at most.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230322094820.24738-2-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230331182141.1900348-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The CPSW9G instance of CPSW Ethernet Switch on TI's J784S4 SoC supports
additional PHY modes like QSGMII. Add a compatible for it.
Enable the use of "ti,qsgmii-main-ports" property for J784S4 CPSW9G.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230315092408.1722114-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a compatible for the HDMI PHY on MT8195
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220919-v8-1-a84c80468fe9@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the clock-output-names property of clock children, even though
the nodes are actually deprecated, to fix dtbs_check warnings like:
k3-j7200-common-proc-board.dtb: wiz@5060000: refclk-dig: 'clock-output-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404190115.546973-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there
is no need for device schema to mention it at all. There are also no
benefits of having it here and a board could actually need more of clock
assignments than the schema allows.
Keep however the assigned-clocks in children nodes, as apparently their
proper parenting is required.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404190115.546973-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there
is no need for device schema to mention it at all. The specific
parenting of the first input and output clock is apparently important,
thus keep them as required, but without defining type.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404190115.546973-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there
is no need for device schema to mention it at all. There are also no
benefits of having it here and a board could actually need more of clock
assignments than the schema allows.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404190115.546973-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there
is no need for device schema to mention it at all. There are also no
benefits of having it here and a board could actually need more of clock
assignments than the schema allows.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404190115.546973-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a new compatible for the QMP UFS PHY found on sa8775p platforms and
update the clocks property to accommodate three clocks.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230411130446.401440-3-brgl@bgdev.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Qcom PCIe controller is capable of using either internal MSI controller
or the external GIC-ITS for signaling MSIs sent by endpoint devices.
Currently, the binding only documents the internal MSI implementation.
Let's document the GIC-ITS imeplementation by making use of msi-map and
msi-map-mask properties. Only one of the implementation should be used
at a time and the drivers can choose the preferred one.
Link: https://lore.kernel.org/r/20230411121442.22227-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Add the SM8550 platform to the binding.
Link: https://lore.kernel.org/r/20230320144658.1794991-1-abel.vesa@linaro.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Cleanup and improvement of the bindings to use "unevaluatedProperties"
instead of "additionalProperties", which allows to accept all the
properties already parsed by referenced common qcom,tlmm-common.yaml
schema.
That common qcom,tlmm-common.yaml binding is going to remove
"input-enable" property, thus using "unevaluatedProperties" allows such
change to propagate to other bindings automatically.
-----BEGIN PGP SIGNATURE-----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=9rw5
-----END PGP SIGNATURE-----
Merge tag 'qcom-pinctrl-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel
Qualcomm pinctrl Devicetree bindings changes for v6.4
Cleanup and improvement of the bindings to use "unevaluatedProperties"
instead of "additionalProperties", which allows to accept all the
properties already parsed by referenced common qcom,tlmm-common.yaml
schema.
That common qcom,tlmm-common.yaml binding is going to remove
"input-enable" property, thus using "unevaluatedProperties" allows such
change to propagate to other bindings automatically.
Add device tree bindings for Cirrus Logic EP93xx internal SoCs' I2S
controller.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230411165951.2335899-1-alexander.sverdlin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document that the da9063 only provides under- *and* over-voltage
monitoring in one, and therefore requires both to be configured with the
same severity and value. Add an example for clarification.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-3-cc4dc698864c@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-40-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-39-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-38-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-37-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-36-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-34-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-33-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-32-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-31-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-30-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-29-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
This also fixes warnings like:
sdm845-cheza-r1.dtb: pinctrl@3400000: qspi-sleep-state: 'oneOf' conditional failed, one must be fixed:
'output-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-28-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-27-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407184546.161168-26-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Wolfram Sang