Will be used in upcoming commits to allow subdevs to better customise
themselves based on which (if any) firmware is available.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We want to be able to register falcons with ACR during the constructor for
the subdev it belongs to, however, we may not have access to the falcon's
registers prior to DEVINIT.
Delay touching registers until the first time the falcon is acquired.
This may temporarily break secboot on non-production boards due to not
being able to determine whether the falcon is in debug or production mode,
the new ACR subdev will not have this issue, and it's not a use-case that's
terribly important for bisectability.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_vram_manager_new:
drivers/gpu/drm/nouveau/nouveau_ttm.c:66:22: warning: variable mem set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_gart_manager_new:
drivers/gpu/drm/nouveau/nouveau_ttm.c:106:22: warning: variable mem set but not used [-Wunused-but-set-variable]
They are not used any more, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Like other cases, it should use rcu protected 'chan' rather
than 'fence->channel' in nouveau_fence_wait_uevent_handler.
Fixes: 0ec5f02f0e ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Method init is typically ordered by class in the FW image as ThreeD,
TwoD, Compute.
Due to a bug in parsing the FW into our internal format, we've been
accidentally sending Twod + Compute methods to the ThreeD class, as
well as Compute methods to the TwoD class - oops.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We accidentally set "psb" which is a no-op instead of "*psb" so it
generates a static checker warning. We should probably set it before
the first error return so that it's always initialized.
Fixes: 923f1bd27b ("drm/nouveau/secboot/gm20b: add secure boot support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Turing introduced a new simplified page kind
scheme, reducing the number of possible page
kinds from 256 to 16. It also is the first
NVIDIA GPU in which the highest possible page
kind value is not reserved as an "invalid" page
kind.
To address this, the invalid page kind is made
an explicit property of the MMU HAL, and a new
table of page kinds is added to the tu102 MMU
HAL.
One hardware change not addressed here is that
0x00 is technically no longer a supported page
kind, and pitch surfaces are instead intended to
share the block-linear generic page kind 0x06.
However, because that will be a rather invasive
change to nouveau and 0x00 still works fine in
practice on Turing hardware, addressing this new
behavior is deferred.
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The pointer used to walk the table of move ops
and pick the right one for the current GPU was
declared static, meaning its state was carried
over between invocations of the function, and also
made the function non-rentrant and thread-unsafe.
Since the table is ordered such that newer GPU
methods are listed first, the result of this was
that initializing newer GPUs after older GPUs
would result in no suitable ttm move acceleration
operations being found, and ttm would fall back
to CPU blits on the older GPUs.
This change declares the walking pointer
separately from the table and makes it non-static
to fix the logic.
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Replace the use of 0 in the pointer assignment with NULL to address the
following sparse warning:
drivers/gpu/drm/nouveau/nouveau_hwmon.c:744:29: warning: Using plain integer as NULL pointer
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The local variable `pclks` is defined and set but not used and can
therefore be removed.
Issue found by coccinelle.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Explicitly declare constants as unsigned long long to address the
following sparse warnings:
warning: constant is so big it is long
v2: convert to unsigned long long for compatibility with 32-bit
architectures.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Suggested by: lia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
match_string() returns the array index of a matching string.
Use it instead of the open-coded implementation.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
gp10b uses the new engine enumeration mechanism introduced in the Pascal
architecture. As a result, the copy engine, which used to be at index 2
for prior Tegra GPU instantiations, has now moved to index 0. Fix up the
index and also use the gp100 variant of the copy engine class because on
gp10b the PASCAL_DMA_COPY_B class is not supported.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are extra registers that need to be programmed to make the level 2
cache work on GP10B, such as the stream ID register that is used when an
SMMU is used to translate memory addresses.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The GPUs found on Tegra SoCs have registers that can be used to read the
WPR configuration. Use these registers instead of reaching into the
memory controller's register space to read the same information.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the GPU clock has not had a rate set, initialize it to the maximum
clock rate to make sure it does run.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When the GPU powergate is controlled by a generic power domain provider,
the reset will automatically be asserted and deasserted as part of the
power-ungating procedure.
On some Jetson TX2 boards, doing an additional assert and deassert of
the GPU outside of the power-ungate procedure can cause the GPU to go
into a bad state where the memory interface can no longer access system
memory.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When Nouveau is instantiated on top of a platform device, the dev->pdev
field will be NULL and calling pci_disable_device() will crash. Move the
PCI disabling code to the PCI specific driver removal code.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There is no BAR2 on GP10B and there is no need to map through BAR2
because all memory is shared between the GPU and the CPU. Add a custom
implementation of the fault sub-device that uses nvkm_memory_addr()
instead of nvkm_memory_bar2() to return the address of a pinned fault
buffer.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The sizeof is currently on args.src and args.dst and should be on
*args.src and *args.dst. Fortunately these sizes just so happen
to be the same size so it worked, however, this should be fixed
and it also cleans up static analysis warnings
Addresses-Coverity: ("sizeof not portable")
Fixes: f268307ec7 ("nouveau: simplify nouveau_dmem_migrate_vma")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This commit is seperate from the previous one to make it easier to
revert in the future. Basically, while working on making MSTOs per-head
as opposed to per-head-per-connector I discovered these lovely issues:
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277https://gitlab.gnome.org/GNOME/mutter/issues/759
Note as well that Intel already has a temporary workaround for this in
their kernel driver. So, unfortunately we need to follow suit to avoid
causing a regression in userspace. Once these issues get fixed, this
commit should be reverted.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, for every single MST capable DRM connector we create a set of
fake encoders, one for each possible head. Unfortunately this ends up
being a huge waste of encoders. While this currently isn't causing us
any problems, it's extremely close to doing so.
The ThinkPad P71 is a good example of this. Originally when trying to
figure out why nouveau was failing to load on this laptop, I discovered
it was because nouveau was creating too many encoders. This ended up
being because we were mistakenly creating MST encoders for the eDP port,
however we are still extremely close to hitting the encoder limit on
this machine as it exposes 1 eDP port and 5 DP ports, resulting in 31
encoders.
So while this fix didn't end up being necessary to fix the P71, we still
need to implement this so that we avoid hitting the encoder limit for
valid display configurations in the event that some machine with more
connectors then this becomes available. Plus, we don't want to let good
code go to waste :)
So, use less encoders by only creating one MSTO per head. Then, attach
each new MSTC to each MSTO which corresponds to a head that it's parent
DP port is capable of using. This brings the number of encoders we
register on the ThinkPad P71 from 31, down to just 15. Yay!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When drm_connector_helper_funcs->atomic_best_encoder is defined,
->best_encoder is ignored by the atomic modesetting helpers. That being
said, this hook is completely broken anyway - it always returns the
first msto for a given mstc, despite the fact it might already be in
use.
So, just get rid of it. We'll need this in a moment anyway, when we make
mstos per-head as opposed to per-connector.
Changes since v1:
* Fix typo in documentation - imirkin
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The hardware supports either size. Also add checks to ensure that only
these two sizes may be used for supplying a LUT.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 5fde30a2684041f9820aa9dc4fbd0009a45076a9 in envytools modified
some of the Falcon V5 encodings, regenerate the relevant FW with this.
Also modify build rules to include SPDX header in generated files.
Tested on GM107, with no issues noted.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
UAPI Changes:
Cross-subsystem Changes:
- Convert simple panel bindings to a template.
Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.
Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
-----BEGIN PGP SIGNATURE-----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=P/VK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
Cross-subsystem Changes:
- Convert simple panel bindings to a template.
Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.
Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com
[why]
Compilation error "undefined reference to `__udivdi3'" was
thrown on i386 architecture.
[how]
Use div_u64 for unsigned long division instead of a divide operator.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the parameter is the mst manager, not the port.
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We need to minimally initialize the remote aux channel, e.g. the
crc work struct of remote aux to dump the sink's DPRX CRCs in MST
setup.
[how]
Add helper that only initializes the crc work struct of the remote
aux, hooke crc work queue to 'drm_dp_aux_crc_work'. Then call this
helper in DP MST port initialization.
This, plus David Francis' patch [1], fix the issue of MST remote
aux DPCD CRCs read.
[1] https://patchwork.kernel.org/patch/11217941/
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
Therefore, whenever a crtc has drm_atomic_crtc_needs_modeset,
for each crtc that shares a MST topology with that stream and
supports DSC, add that crtc (and all affected connectors and
planes) to the atomic state and set mode_changed on its state
v2: Do this check only on Navi and before adding connectors
and planes on modesetting crtcs
v3: Call the drm_dp_mst_add_affected_dsc_crtcs() to update
all affected CRTCs
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
[how]
Adding helper to trigger modesets on MST DSC connectors
by setting mode_changed flag on CRTCs in the same topology
as affected connector
v2: use drm_dp_mst_dsc_aux_for_port function to verify
if the port is DSC capable
v3: - added _must_check attribute
- removed topology manager check
- fix typos and indentations
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Since for DSC MST connector's PBN is claculated differently
due to compression, we have to recalculate both PBN and
VCPI slots for that connector.
[how]
The function iterates through all the active streams to
find, which have DSC enabled, then recalculates PBN for
it and calls drm_dp_helper_update_vcpi_slots_for_dsc to
update connector's VCPI slots.
v2: - use drm_dp_mst_atomic_enable_dsc per port to
enable/disable DSC
v3: - Iterate through connector states from the state passed
- On each connector state get stream from dc_state,
instead CRTC state
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If driver fails to update update VCPI allocation during
compute_mst_dsc_configs_for_state - fail the function
by return early.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there is limited link bandwidth on a MST network,
it must be divided fairly between the streams on that network
Implement an algorithm to determine the correct DSC config
for each stream
The algorithm:
This
[ ] ( )
represents the range of bandwidths possible for a given stream.
The [] area represents the range of DSC configs, and the ()
represents no DSC. The bandwidth used increases from left to right.
First, try disabling DSC on all streams
[ ] (|)
[ ] (|)
Check this against the bandwidth limits of the link and each branch
(including each endpoint). If it passes, the job is done
Second, try maximum DSC compression on all streams
that support DSC
[| ] ( )
[| ] ( )
If this does not pass, then enabling this combination of streams
is impossible
Otherwise, divide the remaining bandwidth evenly amongst the streams
[ | ] ( )
[ | ] ( )
If one or more of the streams reach minimum compression, evenly
divide the reamining bandwidth amongst the remaining streams
[ |] ( )
[ |] ( )
[ | ] ( )
[ | ] ( )
If all streams can reach minimum compression, disable compression
greedily
[ |] ( )
[ |] ( )
[ ] (|)
Perform this algorithm on each full update, on each MST link
with at least one DSC stream on it
After the configs are computed, call
dcn20_add_dsc_to_stream_resource on each stream with DSC enabled.
It is only after all streams are created that we can know which
of them will need DSC.
Do all of this at the end of amdgpu atomic check. If it fails,
fail check; This combination of timings cannot be supported.
v2: Use drm_dp_mst_atomic_check to validate bw for certain dsc
configurations
v3: Use dc_dsc_policy structure to get min and max bpp rate
for DSC configuration
Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to calculate VCPI slots differently for DSC
to take in account current link rate, link count
and FEC.
[how]
Add helper to get pbn_div from dc_link
Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
drm_dp_mst_atomic_check_topology_state() should be renamed
to reflect more specific type of check. Since it is verifying
payload allocation limit it should be renamed into
drm_dp_mst_atomic_check_vcpi_alloc_limit()
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Adding PBN attribute to drm_dp_vcpi_allocation structure to
keep track of how much bandwidth each Port requires.
Adding drm_dp_mst_atomic_check_bw_limit to verify that
state's bandwidth needs doesn't exceed available bandwidth.
The funtion is called in drm_dp_mst_atomic_check after
drm_dp_mst_atomic_check_topology_state to fully verify that
the proposed topology is supported.
v2: Fixing some typos and indenting
v3: Return correct error enums if no bw space available
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a helper function to be called by
drivers outside of DRM to enable DSC on
the MST ports.
Function is called to recalculate VCPI allocation
if DSC is enabled and raise the DSC flag to enable.
In case of disabling DSC the flag is set to false
and recalculation of VCPI slots is expected to be done
in encoder's atomic_check.
v2: squash separate functions into one and call it per
port
v3: Fix comment typos
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ben Skeggs