And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's part of libperf library as basic functions operating on
perf_thread_map objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf trace' reports the segmentation fault as below on Arm64:
# perf trace -e string -e augmented_raw_syscalls.c
LLVM: dumping tools/perf/examples/bpf/augmented_raw_syscalls.o
perf: Segmentation fault
Obtained 12 stack frames.
perf(sighandler_dump_stack+0x47) [0xaaaaac96ac87]
linux-vdso.so.1(+0x5b7) [0xffffadbeb5b7]
/lib/aarch64-linux-gnu/libc.so.6(strlen+0x10) [0xfffface7d5d0]
/lib/aarch64-linux-gnu/libc.so.6(_IO_vfprintf+0x1ac7) [0xfffface49f97]
/lib/aarch64-linux-gnu/libc.so.6(__vsnprintf_chk+0xc7) [0xffffacedfbe7]
perf(scnprintf+0x97) [0xaaaaac9ca3ff]
perf(+0x997bb) [0xaaaaac8e37bb]
perf(cmd_trace+0x28e7) [0xaaaaac8ec09f]
perf(+0xd4a13) [0xaaaaac91ea13]
perf(main+0x62f) [0xaaaaac8a147f]
/lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0xe3) [0xfffface22d23]
perf(+0x57723) [0xaaaaac8a1723]
Segmentation fault
This issue is introduced by commit 30a910d7d3 ("perf trace:
Preallocate the syscall table"), it allocates trace->syscalls.table[]
array and the element count is 'trace->sctbl->syscalls.nr_entries'; but
on Arm64, the system call number is not continuously used; e.g. the
syscall maximum id is 436 but the real entries is only 281.
So the table is allocated with 'nr_entries' as the element count, but it
accesses the table with the syscall id, which might be out of the bound
of the array and cause the segmentation fault.
This patch allocates trace->syscalls.table[] with the element count is
'trace->sctbl->syscalls.max_id + 1', this allows any id to access the
table without out of the bound.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: 30a910d7d3 ("perf trace: Preallocate the syscall table")
Link: http://lkml.kernel.org/r/20190809104752.27338-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evsel__close() function to libperf while keeping a tools/perf
specific evsel__close() to free ids.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-64-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.
Committer notes:
Fixed up these:
tools/perf/arch/arm/util/auxtrace.c
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/arm-spe.c
tools/perf/arch/s390/util/auxtrace.c
tools/perf/util/cs-etm.c
Also
cc1: warnings being treated as errors
tests/sample-parsing.c: In function 'do_test':
tests/sample-parsing.c:162: error: missing initializer
tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')
struct evsel evsel = {
.needs_swap = false,
- .core.attr = {
- .sample_type = sample_type,
- .read_format = read_format,
+ .core = {
+ . attr = {
+ .sample_type = sample_type,
+ .read_format = read_format,
+ },
[perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
gcc (GCC) 4.4.7
Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move nr_entries count from 'struct perf' to into perf_evlist struct.
Committer notes:
Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in
tools/perf/util/annotate.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include perf_evlist in the evlist object, will continue to move other
generic things into libperf's perf_evlist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-37-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Including perf_evsel in evsel object, will continue to move other
generic things into libperf's perf_evsel struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-36-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__disable() to evlist__disable(), so we don't have a
name clash when we add perf_evlist__disable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__enable() to evlist__enable(), so we don't have a
name clash when we add perf_evlist__enable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__open() to evlist__open(), so we don't have a name
clash when we add perf_evlist__open() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming perf_evsel__disable() to evsel__disable(), so we don't have a
name clash when we add perf_evsel__disable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__add() to evlist__add(), so we don't have a name
clash when we add perf_evlist__add() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evsel__new() to evsel__new(), so we don't have a name clash
when we add perf_evsel__new() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remame perf_evsel__delete() to evsel__delete(), so we don't have a name
clash when we add perf_evsel__delete() in libperf.
Also renaming perf_evsel__delete_priv() to evsel__delete_priv().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__delete() to evlist__delete(), so we don't have a
name clash when we add perf_evlist__delete() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__new() to evlist__new(), so we don't have a name
clash when we add perf_evlist__new() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were looking in tracefs for:
/sys/kernel/debug/tracing/events/syscalls/sys_enter_sendfile/format when
what is there is just
/sys/kernel/debug/tracing/events/syscalls/sys_enter_sendfile/format
Its the same id, 40 in x86_64, so just add an alias and let the existing
logic take care of that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-km2hmg7hru6u4pawi5fi903q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have an augmenter for the "open" syscall, which has just one pointer,
in the first argument, a "const char *", so any other syscall that has
just one pointer and that is the first can reuse the "open" BPF
augmenter program.
Even more, syscalls that get two pointers with the first being a string
can reuse "open"'s BPF augmenter till we have an augmenter that better
matches that syscall with two pointers.
With this the few augmenters we have, for open (first arg is a string),
openat (2nd arg is a string), renameat (2nd and 4th are strings) can be
reused by a lot of syscalls, ditto for "bind" reusing "connect" because
both have the 2nd argument as a sockaddr and the 3rd as its len.
Lets see how this makes the "bind" syscall reuse the "connect" BPF prog
augmenter found in tools/perf/examples/bpf/augmented_raw_syscalls.c:
# perf trace -e bind,connect systemctl restart sshd
connect(3, { .family: PF_LOCAL, path: /run/systemd/private }, 23) = 0
#
Oh, it just connects to some daemon, so we better do it system wide and then
stop/start sshd:
# perf trace -e bind,connect
systemctl/10124 connect(3, { .family: PF_LOCAL, path: /run/systemd/private }, 23) = 0
sshd/10102 connect(7, { .family: PF_LOCAL, path: /dev/log }, 110) = 0
systemctl/10126 connect(3, { .family: PF_LOCAL, path: /run/systemd/private }, 23) = 0
systemd/10128 ... [continued]: connect()) = 0
(sshd)/10128 connect(3, { .family: PF_LOCAL, path: /run/systemd/journal/stdout }, 30) ...
sshd/10128 bind(3, { .family: PF_NETLINK }, 12) = 0
sshd/10128 connect(4, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
sshd/10128 connect(3, { .family: PF_INET6, port: 22, addr: :: }, 28) = 0
sshd/10128 connect(3, { .family: PF_UNSPEC }, 16) = 0
sshd/10128 connect(3, { .family: PF_INET, port: 22, addr: 0.0.0.0 }, 16) = 0
sshd/10128 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
sshd/10128 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
sshd/10128 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
sshd/10128 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
sshd/10128 bind(4, { .family: PF_INET, port: 22, addr: 0.0.0.0 }, 16) = 0
sshd/10128 connect(6, { .family: PF_LOCAL, path: /dev/log }, 110) = 0
sshd/10128 bind(6, { .family: PF_INET6, port: 22, addr: :: }, 28) = 0
sshd/10128 connect(7, { .family: PF_LOCAL, path: /dev/log }, 110) = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zfley2ghs4nim1uq4nu6ed3l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll continue reading its details from tracefs as we need it, but
preallocate the whole thing otherwise we may realloc and end up with
pointers to the previous buffer.
I.e. in an upcoming algorithm we'll look for syscalls that have function
signatures that are similar to a given syscall to see if we can reuse
its BPF augmenter, so we may be at syscall 42, having a 'struct syscall'
pointing to that slot in trace->syscalls.table[] and try to read the
slot for an yet unread syscall, which would realloc that table to read
the info for syscall 43, say, which would trigger a realoc of
trace->syscalls.table[], and then the pointer we had for syscall 42
would be pointing to the previous block of memory. b00m.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-m3cjzzifibs13imafhkk77a0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are holes in syscall tables with IDs not associated with any
syscall, mark those when trying to read information for syscalls, which
could happen when iterating thru all syscalls from 0 to the highest
numbered syscall id.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-cku9mpcrcsqaiq0jepu86r68@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We iterate thru the syscall table produced from the kernel syscall
tables reading info, propagate the error and add to the debug message.
This helps in fixing further bugs, such as failing to read the
"sendfile" syscall info when it really should try the aliasm
"sendfile64".
Problems reading syscall 40: 2 (No such file or directory)(sendfile) information
# grep sendfile /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
[40] = "sendfile",
#
I.e. in the tracefs format file for the syscall tracepoints we have it
as sendfile64:
# find /sys -type f -name format | grep sendfile
/sys/kernel/debug/tracing/events/syscalls/sys_enter_sendfile64/format
/sys/kernel/debug/tracing/events/syscalls/sys_exit_sendfile64/format
#
But as "sendfile" in the file used to build the syscall table used in
perf:
$ grep sendfile arch/x86/entry/syscalls/syscall_64.tbl
40 common sendfile __x64_sys_sendfile64
$
So we need to add, in followup patches, aliases in 'perf trace' syscall
data structures to cope with thie.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-w3eluap63x9je0bb8o3t79tz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we invalidate the fd->pathname table in the SCA_CLOSE_FD beautifier,
if we don't have it we may end up keeping an fd->pathname association
that then gets misprinted.
The previous behaviour continues when the close() syscall is enabled,
which may still be a a problem if we lose records (i.e. we may lose a
'close' record and then get that fd reused by socket()) but then the
tool will notify that records are being lost and the user will be warned
that some of the heuristics will fall apart.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-b7t6h8sq9lebemvfy2zh3qq1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. just look for "!syscalls:sys_enter_" or "exit_" plus the syscall
name, that way we need just to add entries to the
augmented_raw_syscalls.c BPF source to add handlers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6xavwddruokp6ohs7tf4qilb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with the renameat and renameat2 syscall, that both receive as
second and fourth parameters a pathname:
# perf trace -e rename* mv one ANOTHER
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
mv: cannot stat 'one': No such file or directory
renameat2(AT_FDCWD, "one", AT_FDCWD, "ANOTHER", RENAME_NOREPLACE) = -1 ENOENT (No such file or directory)
#
Since the per CPU scratch buffer map has space for two maximum sized
pathnames, the verifier is satisfied that there will be no overrun.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x2uboyg5kx2wqeru288209b6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. for a syscall that has its second argument being a string, its
difficult these days to find 'open' being used in the wild :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-yf3kbzirqrukd3fb2sp5qx4p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So, we use a PERF_COUNT_SW_BPF_OUTPUT to output the augmented sys_enter
payload, i.e. to output more than just the raw syscall args, and if
something goes wrong when handling an unfiltered syscall, we bail out
and just return 1 in the bpf program associated with
raw_syscalls:sys_enter, meaning, don't filter that tracepoint, in which
case what will appear in the perf ring buffer isn't the BPF_OUTPUT
event, but the original raw_syscalls:sys_enter event with its normal
payload.
Now that we're switching to using a bpf_tail_call +
BPF_MAP_TYPE_PROG_ARRAY we're going to use this in the common case, so a
bug where raw_syscalls:sys_enter wasn't being handled by
trace__sys_enter() surfaced and for that case, instead of using the
strace-like augmenter (trace__sys_enter()), we continued to use the
normal generic tracepoint handler:
(gdb) p evsel
$2 = (struct perf_evsel *) 0xc03e40
(gdb) p evsel->name
$3 = 0xbc56c0 "raw_syscalls:sys_enter"
(gdb) p ((struct perf_evsel *) 0xc03e40)->name
$4 = 0xbc56c0 "raw_syscalls:sys_enter"
(gdb) p ((struct perf_evsel *) 0xc03e40)->handler
$5 = (void *) 0x495eb3 <trace__event_handler>
This resulted in this:
0.027 raw_syscalls:sys_enter:NR 12 (0, 7fcfcac64c9b, 4d, 7fcfcac64c9b, 7fcfcac6ce00, 19)
... [continued]: brk()) = 0x563b88677000
I.e. only the sys_exit tracepoint was being properly handled, but since
the sys_enter went to the generic trace__event_handler() we printed it
using libtraceevent's formatter instead of 'perf trace's strace-like
one.
Fix it by setting trace__sys_enter() as the handler for
raw_syscalls:sys_enter and setup the tp_field tracepoint field
accessors.
Now, to test it we just make raw_syscalls:sys_enter return 1 right after
checking if the pid is filtered, making it not use
bpf_perf_output_event() but rather ask for the tracepoint not to be
filtered and the result is the expected one:
brk(NULL) = 0x556f42d6e000
I.e. raw_syscalls:sys_enter returns 1, gets handled by
trace__sys_enter() and gets it combined with the raw_syscalls:sys_exit
in a strace-like way.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0mkocgk31nmy0odknegcby4z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. look for "syscalls_sys_enter" and "syscalls_sys_exit" BPF maps of
type PROG_ARRAY and populate it with the handlers as specified per
syscall, for now only 'open' is wiring it to something, in time all
syscalls that need to copy arguments entering a syscall or returning
from one will set these to the right handlers, reusing when possible
pre-existing ones.
Next step is to use bpf_tail_call() into that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-t0p4u43i9vbpzs1xtowna3gb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a step in the direction of being able to use a
BPF_MAP_TYPE_PROG_ARRAY to handle syscalls that need to copy pointer
payloads in addition to the raw tracepoint syscall args.
There is a first example in
tools/perf/examples/bpf/augmented_raw_syscalls.c for the 'open' syscall.
Next step is to introduce the prog array map and use this 'open'
augmenter, then use that augmenter in other syscalls that also only copy
the first arg as a string, and then show how to use with a syscall that
reads more than one filename, like 'rename', etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pys4v57x5qqrybb4cery2mc8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to assign to syscalls that don't need augmentation, i.e.
those with just integer args.
All syscalls will be in a BPF_MAP_TYPE_PROG_ARRAY, and the
bpf_tail_call() keyed by the syscall id will either find nothing in
place, which means the syscall is being filtered, or a function that
will either add things like filenames to the ring buffer, right after
the raw syscall args, or be this unaugmented handler that will just
return 1, meaning don't filter the original
raw_syscalls:sys_{enter,exit} tracepoint.
For now it is not really being used, this is just leg work to break the
patch into smaller pieces.
It introduces a trace__find_bpf_program_by_title() helper that in turn
uses libbpf's bpf_object__find_program_by_title() on the BPF object with
the __augmented_syscalls__ map. "title" is how libbpf calls the SEC()
argument for functions, i.e. the ELF section that follows a convention
to specify what BPF program (a function with this SEC() marking) should
be connected to which tracepoint, kprobes, etc.
In perf anything that is of the form SEC("sys:event_name") will be
connected to that tracepoint by perf's BPF loader.
In this case its something that will be bpf_tail_call()ed from either
the "raw_syscalls:sys_enter" or "raw_syscall:sys_exit" tracepoints, so
its named "!raw_syscalls:unaugmented" to convey that idea, i.e. its not
going to be directly attached to a tracepoint, thus it starts with a
"!".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-meucpjx2u0slpkayx56lxqq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ev_qualifier is an array with the syscall ids passed via -e on the
command line, sort it as we'll search it when setting up the
BPF_MAP_TYPE_PROG_ARRAY.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c8hprylp3ai6e0z9burn2r3s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can conceivably have multiple BPF object files for other purposes, so
better look just on the BPF object containing the __augmented_syscalls__
map for all things augmented_syscalls related.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3jt8knkuae9lt705r1lns202@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can use it when looking for other components of that object
file, such as other programs to add to the BPF_MAP_TYPE_PROG_ARRAY and
use with bpf_tail_call().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-1ibmz7ouv6llqxajy7m8igtd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Circa v5.2 this started to fail:
# perf trace -e /wb/augmented_raw_syscalls.o
event syntax error: '/wb/augmented_raw_syscalls.o'
\___ Operation not permitted
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
In verbose mode we some -EPERM when creating a BPF map:
# perf trace -v -e /wb/augmented_raw_syscalls.o
<SNIP>
libbpf: failed to create map (name: '__augmented_syscalls__'): Operation not permitted
libbpf: failed to load object '/wb/augmented_raw_syscalls.o'
bpf: load objects failed: err=-1: (Operation not permitted)
event syntax error: '/wb/augmented_raw_syscalls.o'
\___ Operation not permitted
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
If we bumped 'ulimit -l 128' to get it from the 64k default to double that, it
worked, so use the recently added rlimit__bump_memlock() helper:
# perf trace -e /wb/augmented_raw_syscalls.o -e open*,*sleep sleep 1
0.000 ( 0.007 ms): sleep/28042 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) = 3
0.022 ( 0.004 ms): sleep/28042 openat(dfd: CWD, filename: "/lib64/libc.so.6", flags: RDONLY|CLOEXEC) = 3
0.201 ( 0.007 ms): sleep/28042 openat(dfd: CWD, filename: "", flags: RDONLY|CLOEXEC) = 3
0.241 (1000.421 ms): sleep/28042 nanosleep(rqtp: 0x7ffd6c3e6ed0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-j6f2ioa6hj9dinzpjvlhcjoc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on the following report from Smatch, fix the potential NULL
pointer dereference check.
tools/perf/builtin-trace.c:1044
thread_trace__new() error: we previously assumed 'ttrace' could be
null (see line 1041).
tools/perf/builtin-trace.c
1037 static struct thread_trace *thread_trace__new(void)
1038 {
1039 struct thread_trace *ttrace = zalloc(sizeof(struct thread_trace));
1040
1041 if (ttrace)
1042 ttrace->files.max = -1;
1043
1044 ttrace->syscall_stats = intlist__new(NULL);
^^^^^^^^
1045
1046 return ttrace;
1047 }
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190702103420.27540-6-leo.yan@linaro.org
[ Just made it look like other tools/perf constructors, same end result ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't just add the consumed bytes to the arg->augmented.args member,
as it is not void *, so it will access (consumed * sizeof(struct augmented_arg))
in the next augmented arg, totally wrong, cast the member to void pointe
before adding the number of bytes consumed, duh.
With this and hardcoding handling the 'renameat' and 'renameat2'
syscalls in the tools/perf/examples/bpf/augmented_raw_syscalls.c eBPF
proggie, we get:
mv/24388 renameat2(AT_FDCWD, "/tmp/build/perf/util/.bpf-event.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.bpf-event.o.cmd", RENAME_NOREPLACE) = 0
mv/24394 renameat2(AT_FDCWD, "/tmp/build/perf/util/.perf-hooks.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.perf-hooks.o.cmd", RENAME_NOREPLACE) = 0
mv/24398 renameat2(AT_FDCWD, "/tmp/build/perf/util/.pmu-bison.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.pmu-bison.o.cmd", RENAME_NOREPLACE) = 0
mv/24401 renameat2(AT_FDCWD, "/tmp/build/perf/util/.expr-bison.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.expr-bison.o.cmd", RENAME_NOREPLACE) = 0
mv/24406 renameat2(AT_FDCWD, "/tmp/build/perf/util/.pmu.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.pmu.o.cmd", RENAME_NOREPLACE) = 0
mv/24407 renameat2(AT_FDCWD, "/tmp/build/perf/util/.pmu-flex.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.pmu-flex.o.cmd", RENAME_NOREPLACE) = 0
mv/24416 renameat2(AT_FDCWD, "/tmp/build/perf/util/.parse-events-flex.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.parse-events-flex.o.cmd", RENAME_NOREPLACE) = 0
I.e. it works with two string args in the same syscall.
Now back to taming the verifier...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 8195168e87 ("perf trace: Consume the augmented_raw_syscalls payload")
Link: https://lkml.kernel.org/n/tip-n1w59lpxks6m1le7fpo6rmyw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename the 'i' variable to 'nr_used' and use set 'nr_allocated' since
the start of this function, leaving the final assignment of the longer
named trace->ev_qualifier_ids.nr state to 'nr_used' at the end of the
function.
No change in behaviour intended.
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-kpgyn8xjdjgt0timrrnniquv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just skipping the syscalls not available in a particular
architecture without reflecting this in the number of entries in the
ev_qualifier_ids.nr variable, fix it.
This was done with the most minimalistic way, reusing the index variable
'i', a followup patch will further clean this by making 'i' renamed to
'nr_used' and using 'nr_allocated' in a few more places.
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Fixes: 04c41bcb86 ("perf trace: Skip unknown syscalls when expanding strace like syscall groups")
Link: https://lkml.kernel.org/r/20190613181514.GC1402@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXP/1xQAKCRCyPKLppCJ+
J9xcAQCwOITAshE7op7HbKUPtkqiMNu+hpNa3skhxEpGHvKO0AEArpBXtuvEP8EU
PZsp+8vcVrlZ+dZutttgvkRz25mScg8=
=kfFb
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.3-20190611' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Igor Lubashev