This patch fixes the issue due to:
[ 89.572883] divide_error: 0000 [#1] SMP KASAN PTI
[ 89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
[ 89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[ 89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
A bits_per_pixel set to zero causes divide by zero error.
This patch moves the calculation after the sanity check.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Reviewed-by: Thomas Zimemrmann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021235758.59993-1-saeed.mirzamohammadi@oracle.com
If the DSI driver is the last to probe, component_add will try to run all
the bind callbacks straight away and return the error code.
However, since we depend on a power domain, we're pretty much guaranteed to
be in that case on the BCM2711, and are just lucky on the previous SoCs
since the v3d also depends on that power domain and is further in the probe
order.
In that case, the DSI host will not stick around in the system: the DSI
bind callback will be executed, will not find any DSI device attached and
will return EPROBE_DEFER, and we will then remove the DSI host and ask to
be probed later on.
But since that host doesn't stick around, DSI devices like the RaspberryPi
touchscreen whose probe is not linked to the DSI host (unlike the usual DSI
devices that will be probed through the call to mipi_dsi_host_register)
cannot attach to the DSI host, and we thus end up in a situation where the
DSI host cannot probe because the panel hasn't probed yet, and the panel
cannot probe because the DSI host hasn't yet.
In order to break this cycle, let's wait until there's a DSI device that
attaches to the DSI host to register the component and allow to progress
further.
Acked-by: Eric Anholt <eric@anholt.net>
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707101912.571531-1-maxime@cerno.tech
User-space should avoid parsing EDIDs for metadata already exposed via
other KMS interfaces and properties. For instance, user-space should not
try to extract a list of modes from the EDID: the kernel might mutate
the mode list (because of link capabilities or quirks for instance).
Other metadata not exposed by KMS can be parsed by user-space. This
includes for instance monitor identification (make/model/serial) and
supported color-spaces.
v2: add short explanation why user-space shouldn't do this (Brian)
Signed-off-by: Simon Ser <contact@emersion.fr>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/V_APW3gKRhljvcmT28tGV3JkP7qW9Z7h45I-s2wiJvYhaaveCpYpg3tztZPsZVV2KV1NC7rUx08IUUgCJXzdRrWCsEGB0czq4ZozpdyVFLs=@emersion.fr
The move notify callback is only used in one place, this should
be removed in the future, but for now just rename it to the use
case which is to notify the driver that the GPU memory is to be
deleted.
Drivers can be cleaned up after this separately.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021044031.1752624-2-airlied@gmail.com
This moves the to system move into the drivers, and moves all
the unbinds in the move path under driver control
Note: radeon/nouveau already wait so don't duplicate it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020010319.1692445-4-airlied@gmail.com
Add ABGR format with 10-bit components packed in 64-bit per pixel.
This format can be used to handle
VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16 on little-endian
architectures.
Signed-off-by: Matteo Franchin <matteo.franchin@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201012164043.23630-1-matteo.franchin@arm.com
Hooray for generic fbdev support, making this a oneliner. We just
needed to fix preferred_depth fixed and the vmap support added first.
This is useful for testing fbdev testcases in igt. Right now we only
have a simple one in the fbdev testcases, which passes both info and
mmap subtests.
v2: Augment commit message as suggested by Melissa.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009232156.3916879-3-daniel.vetter@ffwll.ch
In all 3 drivers there is a case where the driver knows the
bo is in SYSTEM so don't call the api that checks that.
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019071314.1671485-4-airlied@gmail.com
This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com
Simple DSI panels can also have a reset GPIO signal in addition/instead of an
enable GPIO signal.
This adds an optional reset-gpios property.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-3-narmstrong@baylibre.com
In function via_mem_alloc`s error branch, DRM_ERROR is protected
in the mutex_lock(&dev->struct_mutex) area.
>From the code, we see that DRM_ERROR is just an error log print
without any struct element, there is no need to protect this.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200814083021.8962-1-bernard@vivo.com
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: 179c02fe90 ("drm/tve200: Add new driver for TVE200")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827071107.27429-2-krzk@kernel.org
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: 5fc537bfd0 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827071107.27429-1-krzk@kernel.org
Eliminate the following coccicheck warning:
drivers/video/fbdev/fsl-diu-fb.c:1428:5-8: Unneeded variable: "res".
Return "0" on line 1450
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910140558.1191423-1-yanaijie@huawei.com
This eliminates the following sparse warning:
drivers/gpu/drm/panel/panel-sitronix-st7703.c:156:26: warning: symbol
'jh057n00900_panel_desc' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
[Use static const]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033809.142773-1-yanaijie@huawei.com
This eliminates the following sparse warning:
drivers/gpu/drm/bridge/adv7511/adv7511_audio.c:58:5: warning: symbol
'adv7511_hdmi_hw_params' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033826.142923-1-yanaijie@huawei.com
This eliminates the following sparse warning:
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c:527:5: warning: symbol
'analogix_dp_start_aux_transaction' was not declared. Should it be
static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033843.143240-1-yanaijie@huawei.com
Qinglang Miao