Commit Graph

543 Commits

Author SHA1 Message Date
Linus Torvalds 5f6e430f93 powerpc updates for 6.2
- Add powerpc qspinlock implementation optimised for large system scalability and
    paravirt. See the merge message for more details.
 
  - Enable objtool to be built on powerpc to generate mcount locations.
 
  - Use a temporary mm for code patching with the Radix MMU, so the writable mapping is
    restricted to the patching CPU.
 
  - Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI.
 
  - Sanitise user registers on interrupt entry on 64-bit Book3S.
 
  - Many other small features and fixes.
 
 Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen
 Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin
 Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven,
 Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain,
 Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao,
 Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure,
 Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
 Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang
 Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmOfrj8THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgIWtD/9mGF/ze2k+qFTo+30fb7bO8WJIDgsR
 dIASnZjXV7q/45elvymhUdkQv4R7xL3pzC40P1+ZKtWzGTNe+zWUQLoALNwRK85j
 8CsxZbqefGNKE5Z6ZHo9s37wsu3+jJu9yEQpGFo1LINyzeclCn5St5oqfRam+Hd/
 cPF+VfvREwZ0+YOKGBhJ2EgC+Gc9xsFY7DLQsoYlu71iZZr6Z6rgZW/EY5h3RMGS
 YKBoVwDsWaU0FpFWrr/rYTI6DqSr3AHr1+ftDg7ncCZMD6vQva6aMCCt94aLB1aE
 vC+DNdhZlA558bXGa5yA7Wr//7aUBUIwyC60DogOeZ6vw3kD9tdEd1fbH5hmqNKY
 K5bfqm28XU2959CTE8RDgsYYZvwDcfrjBIML14WZGdCQOTcGKpgOGp22o6yNb1Pq
 JKpHHnVpvu2PZ/p2XdKSm9+etr2yI6lXZAEVTS7ehdtMukButjSHEVbSCEZ8tlWz
 KokQt2J23BMHuSrXK6+67wWQBtdsLEk+LBOQmweiwarMocqvL/Zjz/5J7DR2DtH8
 wlY3wOtB1+E5j7xZ+RgK3c3jNg5dH39ZwvFsSATWTI3P+iq6OK/bbk4q4LmZt2l9
 ZIfH/CXPf9BvGCHzHa3AAd3UBbJLFwj17btMEv1wFVPS0T4LPUzkgTNTNUYeP6zL
 h1e5QfgUxvKPuQ==
 =7k3p
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Add powerpc qspinlock implementation optimised for large system
   scalability and paravirt. See the merge message for more details

 - Enable objtool to be built on powerpc to generate mcount locations

 - Use a temporary mm for code patching with the Radix MMU, so the
   writable mapping is restricted to the patching CPU

 - Add an option to build the 64-bit big-endian kernel with the ELFv2
   ABI

 - Sanitise user registers on interrupt entry on 64-bit Book3S

 - Many other small features and fixes

Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.

* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
  powerpc/code-patching: Fix oops with DEBUG_VM enabled
  powerpc/qspinlock: Fix 32-bit build
  powerpc/prom: Fix 32-bit build
  powerpc/rtas: mandate RTAS syscall filtering
  powerpc/rtas: define pr_fmt and convert printk call sites
  powerpc/rtas: clean up includes
  powerpc/rtas: clean up rtas_error_log_max initialization
  powerpc/pseries/eeh: use correct API for error log size
  powerpc/rtas: avoid scheduling in rtas_os_term()
  powerpc/rtas: avoid device tree lookups in rtas_os_term()
  powerpc/rtasd: use correct OF API for event scan rate
  powerpc/rtas: document rtas_call()
  powerpc/pseries: unregister VPA when hot unplugging a CPU
  powerpc/pseries: reset the RCU watchdogs after a LPM
  powerpc: Take in account addition CPU node when building kexec FDT
  powerpc: export the CPU node count
  powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
  powerpc/dts/fsl: Fix pca954x i2c-mux node names
  cxl: Remove unnecessary cxl_pci_window_alignment()
  selftests/powerpc: Fix resource leaks
  ...
2022-12-19 07:13:33 -06:00
Linus Torvalds 94a855111e - Add the call depth tracking mitigation for Retbleed which has
been long in the making. It is a lighterweight software-only fix for
 Skylake-based cores where enabling IBRS is a big hammer and causes a
 significant performance impact.
 
 What it basically does is, it aligns all kernel functions to 16 bytes
 boundary and adds a 16-byte padding before the function, objtool
 collects all functions' locations and when the mitigation gets applied,
 it patches a call accounting thunk which is used to track the call depth
 of the stack at any time.
 
 When that call depth reaches a magical, microarchitecture-specific value
 for the Return Stack Buffer, the code stuffs that RSB and avoids its
 underflow which could otherwise lead to the Intel variant of Retbleed.
 
 This software-only solution brings a lot of the lost performance back,
 as benchmarks suggest:
 
   https://lore.kernel.org/all/20220915111039.092790446@infradead.org/
 
 That page above also contains a lot more detailed explanation of the
 whole mechanism
 
 - Implement a new control flow integrity scheme called FineIBT which is
 based on the software kCFI implementation and uses hardware IBT support
 where present to annotate and track indirect branches using a hash to
 validate them
 
 - Other misc fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOZp5EACgkQEsHwGGHe
 VUrZFxAAvi/+8L0IYSK4mKJvixGbTFjxN/Swo2JVOfs34LqGUT6JaBc+VUMwZxdb
 VMTFIZ3ttkKEodjhxGI7oGev6V8UfhI37SmO2lYKXpQVjXXnMlv/M+Vw3teE38CN
 gopi+xtGnT1IeWQ3tc/Tv18pleJ0mh5HKWiW+9KoqgXj0wgF9x4eRYDz1TDCDA/A
 iaBzs56j8m/FSykZHnrWZ/MvjKNPdGlfJASUCPeTM2dcrXQGJ93+X2hJctzDte0y
 Nuiw6Y0htfFBE7xoJn+sqm5Okr+McoUM18/CCprbgSKYk18iMYm3ZtAi6FUQZS1A
 ua4wQCf49loGp15PO61AS5d3OBf5D3q/WihQRbCaJvTVgPp9sWYnWwtcVUuhMllh
 ZQtBU9REcVJ/22bH09Q9CjBW0VpKpXHveqQdqRDViLJ6v/iI6EFGmD24SW/VxyRd
 73k9MBGrL/dOf1SbEzdsnvcSB3LGzp0Om8o/KzJWOomrVKjBCJy16bwTEsCZEJmP
 i406m92GPXeaN1GhTko7vmF0GnkEdJs1GVCZPluCAxxbhHukyxHnrjlQjI4vC80n
 Ylc0B3Kvitw7LGJsPqu+/jfNHADC/zhx1qz/30wb5cFmFbN1aRdp3pm8JYUkn+l/
 zri2Y6+O89gvE/9/xUhMohzHsWUO7xITiBavewKeTP9GSWybWUs=
 =cRy1
 -----END PGP SIGNATURE-----

Merge tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Borislav Petkov:

 - Add the call depth tracking mitigation for Retbleed which has been
   long in the making. It is a lighterweight software-only fix for
   Skylake-based cores where enabling IBRS is a big hammer and causes a
   significant performance impact.

   What it basically does is, it aligns all kernel functions to 16 bytes
   boundary and adds a 16-byte padding before the function, objtool
   collects all functions' locations and when the mitigation gets
   applied, it patches a call accounting thunk which is used to track
   the call depth of the stack at any time.

   When that call depth reaches a magical, microarchitecture-specific
   value for the Return Stack Buffer, the code stuffs that RSB and
   avoids its underflow which could otherwise lead to the Intel variant
   of Retbleed.

   This software-only solution brings a lot of the lost performance
   back, as benchmarks suggest:

       https://lore.kernel.org/all/20220915111039.092790446@infradead.org/

   That page above also contains a lot more detailed explanation of the
   whole mechanism

 - Implement a new control flow integrity scheme called FineIBT which is
   based on the software kCFI implementation and uses hardware IBT
   support where present to annotate and track indirect branches using a
   hash to validate them

 - Other misc fixes and cleanups

* tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
  x86/paravirt: Use common macro for creating simple asm paravirt functions
  x86/paravirt: Remove clobber bitmask from .parainstructions
  x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al
  x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit
  x86/Kconfig: Enable kernel IBT by default
  x86,pm: Force out-of-line memcpy()
  objtool: Fix weak hole vs prefix symbol
  objtool: Optimize elf_dirty_reloc_sym()
  x86/cfi: Add boot time hash randomization
  x86/cfi: Boot time selection of CFI scheme
  x86/ibt: Implement FineIBT
  objtool: Add --cfi to generate the .cfi_sites section
  x86: Add prefix symbols for function padding
  objtool: Add option to generate prefix symbols
  objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
  objtool: Slice up elf_create_section_symbol()
  kallsyms: Revert "Take callthunks into account"
  x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces
  x86/retpoline: Fix crash printing warning
  x86/paravirt: Fix a !PARAVIRT build warning
  ...
2022-12-14 15:03:00 -08:00
Michael Ellerman a39818a3fb objtool/powerpc: Implement arch_pc_relative_reloc()
Provide an implementation for arch_pc_relative_reloc(). It is needed to
pass the build once 61c6065ef7 ("objtool: Allow !PC relative
relocations") is merged.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2022-11-23 21:26:10 +11:00
Sathvika Vasireddy c984aef8c8 objtool/powerpc: Add --mcount specific implementation
This patch enables objtool --mcount on powerpc, and adds implementation
specific to powerpc.

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-17-sv@linux.ibm.com
2022-11-18 19:00:16 +11:00
Sathvika Vasireddy e52ec98c5a objtool/powerpc: Enable objtool to be built on ppc
This patch adds [stub] implementations for required functions, inorder
to enable objtool build on powerpc.

[Christophe Leroy: powerpc: Add missing asm/asm.h for objtool,
Use local variables for type and imm in arch_decode_instruction(),
Adapt len for prefixed instructions.]

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-16-sv@linux.ibm.com
2022-11-18 19:00:16 +11:00
Sathvika Vasireddy 4ca993d498 objtool: Add arch specific function arch_ftrace_match()
Add architecture specific function to look for relocation records
pointing to architecture specific symbols.

Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-15-sv@linux.ibm.com
2022-11-18 19:00:16 +11:00
Sathvika Vasireddy c144973521 objtool: Use macros to define arch specific reloc types
Make relocation types architecture specific.

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-14-sv@linux.ibm.com
2022-11-18 19:00:16 +11:00
Sathvika Vasireddy de6fbcedf5 objtool: Read special sections with alts only when specific options are selected
Call add_special_section_alts() only when stackval or orc or uaccess or
noinstr options are passed to objtool.

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-13-sv@linux.ibm.com
2022-11-18 19:00:16 +11:00
Sathvika Vasireddy 280981d699 objtool: Add --mnop as an option to --mcount
Some architectures (powerpc) may not support ftrace locations being nop'ed
out at build time. Introduce CONFIG_HAVE_OBJTOOL_NOP_MCOUNT for objtool, as
a means for architectures to enable nop'ing of ftrace locations. Add --mnop
as an option to objtool --mcount, to indicate support for the same.

Also, make sure that --mnop can be passed as an option to objtool only when
--mcount is passed.

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-12-sv@linux.ibm.com
2022-11-18 19:00:16 +11:00
Christophe Leroy 86ea7f3615 objtool: Use target file class size instead of a compiled constant
In order to allow using objtool on cross-built kernels,
determine size of long from elf data instead of using
sizeof(long) at build time.

For the time being this covers only mcount.

[Sathvika Vasireddy: Rename variable "size" to "addrsize" and function
"elf_class_size()" to "elf_class_addrsize()", and modify
create_mcount_loc_sections() function to follow reverse christmas tree
format to order local variable declarations.]

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-11-sv@linux.ibm.com
2022-11-18 19:00:16 +11:00
Christophe Leroy 0646c28b41 objtool: Use target file endianness instead of a compiled constant
Some architectures like powerpc support both endianness, it's
therefore not possible to fix the endianness via arch/endianness.h
because there is no easy way to get the target endianness at
build time.

Use the endianness recorded in the file objtool is working on.

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-10-sv@linux.ibm.com
2022-11-18 19:00:15 +11:00
Christophe Leroy efb11fdb3e objtool: Fix SEGFAULT
find_insn() will return NULL in case of failure. Check insn in order
to avoid a kernel Oops for NULL pointer dereference.

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-9-sv@linux.ibm.com
2022-11-18 19:00:15 +11:00
Peter Zijlstra 023f2340f0 objtool: Fix weak hole vs prefix symbol
Boris (and the robot) reported that objtool grew a new complaint about
unreachable instructions. Upon inspection it was immediately clear
the __weak zombie instructions struck again.

For the unweary, the linker will simply remove the symbol for
overriden __weak symbols but leave the instructions in place, creating
unreachable instructions -- and objtool likes to report these.

Commit 4adb236867 ("objtool: Ignore extra-symbol code") was supposed
to have dealt with that, but the new commit 9f2899fe36 ("objtool:
Add option to generate prefix symbols") subtly broke that logic by
created unvisited symbols.

Fixes: 9f2899fe36 ("objtool: Add option to generate prefix symbols")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2022-11-05 11:28:02 +01:00
Peter Zijlstra 19526717f7 objtool: Optimize elf_dirty_reloc_sym()
When moving a symbol in the symtab its index changes and any reloc
referring that symtol-table-index will need to be rewritten too.

In order to facilitate this, objtool simply marks the whole reloc
section 'changed' which will cause the whole section to be
re-generated.

However, finding the relocs that use any given symbol is implemented
rather crudely -- a fully iteration of all sections and their relocs.
Given that some builds have over 20k sections (kallsyms etc..)
iterating all that for *each* symbol moved takes a bit of time.

Instead have each symbol keep a list of relocs that reference it.

This *vastly* improves build times for certain configs.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y2LlRA7x+8UsE1xf@hirez.programming.kicks-ass.net
2022-11-05 11:28:02 +01:00
Peter Zijlstra 9a479f766b objtool: Add --cfi to generate the .cfi_sites section
Add the location of all __cfi_##name symbols (as generated by kCFI) to
a section such that we might re-write things at kernel boot.

Notably; boot time re-hashing and FineIBT are the intended use of
this.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221027092842.568039454@infradead.org
2022-11-01 13:44:10 +01:00
Peter Zijlstra 9f2899fe36 objtool: Add option to generate prefix symbols
When code is compiled with:

  -fpatchable-function-entry=${PADDING_BYTES},${PADDING_BYTES}

functions will have PADDING_BYTES of NOP in front of them. Unwinders
and other things that symbolize code locations will typically
attribute these bytes to the preceding function.

Given that these bytes nominally belong to the following symbol this
mis-attribution is confusing.

Inspired by the fact that CFI_CLANG emits __cfi_##name symbols to
claim these bytes, allow objtool to emit __pfx_##name symbols to do
the same.

Therefore add the objtool --prefix=N argument, to conditionally place
a __pfx_##name symbol at N bytes ahead of symbol 'name' when: all
these preceding bytes are NOP and name-N is an instruction boundary.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Link: https://lkml.kernel.org/r/20221028194453.526899822@infradead.org
2022-11-01 13:44:09 +01:00
Peter Zijlstra 13f60e80e1 objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
Due to how gelf_update_sym*() requires an Elf_Data pointer, and how
libelf keeps Elf_Data in a linked list per section,
elf_update_symbol() ends up having to iterate this list on each
update to find the correct Elf_Data for the index'ed symbol.

By allocating one Elf_Data per new symbol, the list grows per new
symbol, giving an effective O(n^2) insertion time. This is obviously
bloody terrible.

Therefore over-allocate the Elf_Data when an extention is needed.
Except it turns out libelf disregards Elf_Scn::sh_size in favour of
the sum of Elf_Data::d_size. IOW it will happily write out all the
unused space and fill it with:

  0000000000000000     0 NOTYPE  LOCAL  DEFAULT  UND

entries (aka zeros). Which obviously violates the STB_LOCAL placement
rule, and is a general pain in the backside for not being the desired
behaviour.

Manually fix-up the Elf_Data size to avoid this problem before calling
elf_update().

This significantly improves performance when adding a significant
number of symbols.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Link: https://lkml.kernel.org/r/20221028194453.461658986@infradead.org
2022-11-01 13:44:08 +01:00
Peter Zijlstra 4c91be8e92 objtool: Slice up elf_create_section_symbol()
In order to facilitate creation of more symbol types, slice up
elf_create_section_symbol() to extract a generic helper that deals
with adding ELF symbols.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Link: https://lkml.kernel.org/r/20221028194453.396634875@infradead.org
2022-11-01 13:44:08 +01:00
Marco Elver 63646fcba5 objtool, kcsan: Add volatile read/write instrumentation to whitelist
Adds KCSAN's volatile instrumentation to objtool's uaccess whitelist.

Recent kernel change have shown that this was missing from the uaccess
whitelist (since the first upstreamed version of KCSAN):

  mm/gup.o: warning: objtool: fault_in_readable+0x101: call to __tsan_volatile_write1() with UACCESS enabled

Fixes: 75d75b7a4d ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-10-18 15:07:33 -07:00
Peter Zijlstra 5a9c361a41 objtool: Allow STT_NOTYPE -> STT_FUNC+0 sibling-calls
Teach objtool about STT_NOTYPE -> STT_FUNC+0 sibling calls. Doing do
allows slightly simpler .S files.

There is a slight complication in that we specifically do not want to
allow sibling calls from symbol holes (previously covered by STT_WEAK
symbols) -- such things exist where a weak function has a .cold
subfunction for example.

Additionally, STT_NOTYPE tail-calls are allowed to happen with a
modified stack frame, they don't need to obey the normal rules after
all.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2022-10-17 16:41:09 +02:00
Peter Zijlstra dbcdbdfdf1 objtool: Rework instruction -> symbol mapping
Currently insn->func contains a instruction -> symbol link for
STT_FUNC symbols. A NULL value is assumed to mean STT_NOTYPE.
However, there are also instructions not covered by any symbol at all.
This can happen due to __weak symbols for example.

Since the current scheme cannot differentiate between no symbol and
STT_NOTYPE symbol, change things around. Make insn->sym point to any
symbol type such that !insn->sym means no symbol and add a helper
insn_func() that check the sym->type to retain the old functionality.

This then prepares the way to add code that depends on the distinction
between STT_NOTYPE and no symbol at all.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2022-10-17 16:41:08 +02:00
Peter Zijlstra 08ef8c4011 objtool: Allow symbol range comparisons for IBT/ENDBR
A semi common pattern is where code checks if a code address is
within a specific range. All text addresses require either ENDBR or
ANNOTATE_ENDBR, however the ANNOTATE_NOENDBR past the range is
unnatural.

Instead, suppress this warning when this is exactly at the end of a
symbol that itself starts with either ENDBR/ANNOTATE_ENDBR.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111146.434642471@infradead.org
2022-10-17 16:41:08 +02:00
Peter Zijlstra 5da6aea375 objtool: Fix find_{symbol,func}_containing()
The current find_{symbol,func}_containing() functions are broken in
the face of overlapping symbols, exactly the case that is needed for a
new ibt/endbr supression.

Import interval_tree_generic.h into the tools tree and convert the
symbol tree to an interval tree to support proper range stabs.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111146.330203761@infradead.org
2022-10-17 16:41:08 +02:00
Peter Zijlstra 0c0a6d8934 objtool: Add --hacks=skylake
Make the call/func sections selectable via the --hacks option.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111146.120821440@infradead.org
2022-10-17 16:41:07 +02:00
Peter Zijlstra 00abd38408 objtool: Add .call_sites section
In preparation for call depth tracking provide a section which collects all
direct calls.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111146.016511961@infradead.org
2022-10-17 16:41:07 +02:00
Peter Zijlstra 6644ee846c objtool: Track init section
For future usage of .init.text exclusion track the init section in the
instruction decoder and use the result in retpoline validation.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111145.910334431@infradead.org
2022-10-17 16:41:07 +02:00
Peter Zijlstra 61c6065ef7 objtool: Allow !PC relative relocations
Objtool doesn't currently much like per-cpu usage in alternatives:

arch/x86/entry/entry_64.o: warning: objtool: .altinstr_replacement+0xf: unsupported relocation in alternatives section
  f:   65 c7 04 25 00 00 00 00 00 00 00 80     movl   $0x80000000,%gs:0x0      13: R_X86_64_32S        __x86_call_depth

Since the R_X86_64_32S relocation is location invariant (it's
computation doesn't include P - the address of the location itself),
it can be trivially allowed.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111145.806607235@infradead.org
2022-10-17 16:41:06 +02:00
Linus Torvalds 27bc50fc90 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any negative
   reports (or any positive ones, come to that).
 
 - Also the Maple Tree from Liam R.  Howlett.  An overlapping range-based
   tree for vmas.  It it apparently slight more efficient in its own right,
   but is mainly targeted at enabling work to reduce mmap_lock contention.
 
   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.
 
   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
   This has yet to be addressed due to Liam's unfortunately timed
   vacation.  He is now back and we'll get this fixed up.
 
 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer.  It uses
   clang-generated instrumentation to detect used-unintialized bugs down to
   the single bit level.
 
   KMSAN keeps finding bugs.  New ones, as well as the legacy ones.
 
 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.
 
 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
   file/shmem-backed pages.
 
 - userfaultfd updates from Axel Rasmussen
 
 - zsmalloc cleanups from Alexey Romanov
 
 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
 
 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.
 
 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.
 
 - memcg cleanups from Kairui Song.
 
 - memcg fixes and cleanups from Johannes Weiner.
 
 - Vishal Moola provides more folio conversions
 
 - Zhang Yi removed ll_rw_block() :(
 
 - migration enhancements from Peter Xu
 
 - migration error-path bugfixes from Huang Ying
 
 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths.  For optimizations by PMEM drivers, DRM
   drivers, etc.
 
 - vma merging improvements from Jakub Matěn.
 
 - NUMA hinting cleanups from David Hildenbrand.
 
 - xu xin added aditional userspace visibility into KSM merging activity.
 
 - THP & KSM code consolidation from Qi Zheng.
 
 - more folio work from Matthew Wilcox.
 
 - KASAN updates from Andrey Konovalov.
 
 - DAMON cleanups from Kaixu Xia.
 
 - DAMON work from SeongJae Park: fixes, cleanups.
 
 - hugetlb sysfs cleanups from Muchun Song.
 
 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
 joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
 bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
 =xfWx
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
   linux-next for a couple of months without, to my knowledge, any
   negative reports (or any positive ones, come to that).

 - Also the Maple Tree from Liam Howlett. An overlapping range-based
   tree for vmas. It it apparently slightly more efficient in its own
   right, but is mainly targeted at enabling work to reduce mmap_lock
   contention.

   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.

   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   at [1]. This has yet to be addressed due to Liam's unfortunately
   timed vacation. He is now back and we'll get this fixed up.

 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
   clang-generated instrumentation to detect used-unintialized bugs down
   to the single bit level.

   KMSAN keeps finding bugs. New ones, as well as the legacy ones.

 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.

 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
   support file/shmem-backed pages.

 - userfaultfd updates from Axel Rasmussen

 - zsmalloc cleanups from Alexey Romanov

 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
   memory-failure

 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.

 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.

 - memcg cleanups from Kairui Song.

 - memcg fixes and cleanups from Johannes Weiner.

 - Vishal Moola provides more folio conversions

 - Zhang Yi removed ll_rw_block() :(

 - migration enhancements from Peter Xu

 - migration error-path bugfixes from Huang Ying

 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths. For optimizations by PMEM drivers, DRM
   drivers, etc.

 - vma merging improvements from Jakub Matěn.

 - NUMA hinting cleanups from David Hildenbrand.

 - xu xin added aditional userspace visibility into KSM merging
   activity.

 - THP & KSM code consolidation from Qi Zheng.

 - more folio work from Matthew Wilcox.

 - KASAN updates from Andrey Konovalov.

 - DAMON cleanups from Kaixu Xia.

 - DAMON work from SeongJae Park: fixes, cleanups.

 - hugetlb sysfs cleanups from Muchun Song.

 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.

Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]

* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
  hugetlb: allocate vma lock for all sharable vmas
  hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
  hugetlb: fix vma lock handling during split vma and range unmapping
  mglru: mm/vmscan.c: fix imprecise comments
  mm/mglru: don't sync disk for each aging cycle
  mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
  mm: memcontrol: use do_memsw_account() in a few more places
  mm: memcontrol: deprecate swapaccounting=0 mode
  mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
  mm/secretmem: remove reduntant return value
  mm/hugetlb: add available_huge_pages() func
  mm: remove unused inline functions from include/linux/mm_inline.h
  selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
  selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
  selftests/vm: add thp collapse shmem testing
  selftests/vm: add thp collapse file and tmpfs testing
  selftests/vm: modularize thp collapse memory operations
  selftests/vm: dedup THP helpers
  mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
  mm/madvise: add file and shmem support to MADV_COLLAPSE
  ...
2022-10-10 17:53:04 -07:00
Linus Torvalds 65f109e199 Objtool changes for v6.1:
- Remove the "ANNOTATE_NOENDBR on ENDBR" warning: it's not
    really useful and only found a non-bug false positive so far.
 
  - Properly decode LOOP/LOOPE/LOOPNE, which were missing from
    the x86 decoder. Because these instructions are rather
    ineffective, they never showed up in compiler output,
    but they are simple enough to support, so add them for
    completeness.
 
  - A bit more cross-arch preparatory work.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmM/4C4RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1golg//cWCQqnPy1JDwQIF5zm1oNXAZlcyDDfgp
 066NP8IlxajWgkPLunRSzId1ZQW4dppk7ccqI/J6mvNgKJe+nKGO1GXJ94aElxmr
 XJdJm8P3R+sYggfVtxMWqZr5cy9JTa7P/4bKDEC7hyP63FXZkOFA7Fk7PZTU/lKm
 gQ7IW8CKt+kSqygk8xBTS1gW7EfQWo0hA1mZN75ewwlJP0MJVlECKCfFEjQEVTJb
 z4M/iCybJolhiAGktGBM+bj8YijN2/ZvZ9zIC90neMaTLNFY6zMlUbV9WmVT5X+F
 1UFlKczNpOxwk3/IGVlwn3IzDToxYk1LMkWc7W7bfcu15aPvJUSR/QJjsRoGsLtX
 R4Cpa8dKkvDkbnMEUV9Y93AUehF6WO5ZEzPieCxEQLLieZD+XWQdSIiCugoB3+Kr
 BD1n9iE/Gm7IMHAp1yVkNGcMclu4Co9Cc36v71SzfuJznqf+Nv6gm/qy4KCofrZR
 C1CCnP/y1Yez4Z0avsbsTqQtCr/TCE7Nf8GmV3fL4rMtxG5eTap7X1GswiGRuL/G
 uTe9oKBHuSYBwrVK14/cqtAaPkSy+tIXb2GZUMfdYwx6baLTnz9MGhhXaOyDEOMw
 uwt0qd4cXmUqmAhyi+SGRsP4v9HVdmyQFonm8v2gymUltBrb5hWteFOKVPXgt9E+
 4wo/pldrr+A=
 =D5iK
 -----END PGP SIGNATURE-----

Merge tag 'objtool-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

 - Remove the "ANNOTATE_NOENDBR on ENDBR" warning: it's not really
   useful and only found a non-bug false positive so far.

 - Properly decode LOOP/LOOPE/LOOPNE, which were missing from the x86
   decoder. Because these instructions are rather ineffective, they
   never showed up in compiler output, but they are simple enough to
   support, so add them for completeness.

 - A bit more cross-arch preparatory work.

* tag 'objtool-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool,x86: Teach decode about LOOP* instructions
  objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warning
  objtool: Use arch_jump_destination() in read_intra_function_calls()
2022-10-10 09:56:19 -07:00
Linus Torvalds 0326074ff4 Networking changes for 6.1.
Core
 ----
 
  - Introduce and use a single page frag cache for allocating small skb
    heads, clawing back the 10-20% performance regression in UDP flood
    test from previous fixes.
 
  - Run packets which already went thru HW coalescing thru SW GRO.
    This significantly improves TCP segment coalescing and simplifies
    deployments as different workloads benefit from HW or SW GRO.
 
  - Shrink the size of the base zero-copy send structure.
 
  - Move TCP init under a new slow / sleepable version of DO_ONCE().
 
 BPF
 ---
 
  - Add BPF-specific, any-context-safe memory allocator.
 
  - Add helpers/kfuncs for PKCS#7 signature verification from BPF
    programs.
 
  - Define a new map type and related helpers for user space -> kernel
    communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
 
  - Allow targeting BPF iterators to loop through resources of one
    task/thread.
 
  - Add ability to call selected destructive functions.
    Expose crash_kexec() to allow BPF to trigger a kernel dump.
    Use CAP_SYS_BOOT check on the loading process to judge permissions.
 
  - Enable BPF to collect custom hierarchical cgroup stats efficiently
    by integrating with the rstat framework.
 
  - Support struct arguments for trampoline based programs.
    Only structs with size <= 16B and x86 are supported.
 
  - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
    sockets (instead of just TCP and UDP sockets).
 
  - Add a helper for accessing CLOCK_TAI for time sensitive network
    related programs.
 
  - Support accessing network tunnel metadata's flags.
 
  - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
 
  - Add support for writing to Netfilter's nf_conn:mark.
 
 Protocols
 ---------
 
  - WiFi: more Extremely High Throughput (EHT) and Multi-Link
    Operation (MLO) work (802.11be, WiFi 7).
 
  - vsock: improve support for SO_RCVLOWAT.
 
  - SMC: support SO_REUSEPORT.
 
  - Netlink: define and document how to use netlink in a "modern" way.
    Support reporting missing attributes via extended ACK.
 
  - IPSec: support collect metadata mode for xfrm interfaces.
 
  - TCPv6: send consistent autoflowlabel in SYN_RECV state
    and RST packets.
 
  - TCP: introduce optional per-netns connection hash table to allow
    better isolation between namespaces (opt-in, at the cost of memory
    and cache pressure).
 
  - MPTCP: support TCP_FASTOPEN_CONNECT.
 
  - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
 
  - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
 
  - Open vSwitch:
    - Allow specifying ifindex of new interfaces.
    - Allow conntrack and metering in non-initial user namespace.
 
  - TLS: support the Korean ARIA-GCM crypto algorithm.
 
  - Remove DECnet support.
 
 Driver API
 ----------
 
  - Allow selecting the conduit interface used by each port
    in DSA switches, at runtime.
 
  - Ethernet Power Sourcing Equipment and Power Device support.
 
  - Add tc-taprio support for queueMaxSDU parameter, i.e. setting
    per traffic class max frame size for time-based packet schedules.
 
  - Support PHY rate matching - adapting between differing host-side
    and link-side speeds.
 
  - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
 
  - Validate OF (device tree) nodes for DSA shared ports; make
    phylink-related properties mandatory on DSA and CPU ports.
    Enforcing more uniformity should allow transitioning to phylink.
 
  - Require that flash component name used during update matches one
    of the components for which version is reported by info_get().
 
  - Remove "weight" argument from driver-facing NAPI API as much
    as possible. It's one of those magic knobs which seemed like
    a good idea at the time but is too indirect to use in practice.
 
  - Support offload of TLS connections with 256 bit keys.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - Microchip KSZ9896 6-port Gigabit Ethernet Switch
    - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
    - Analog Devices ADIN1110 and ADIN2111 industrial single pair
      Ethernet (10BASE-T1L) MAC+PHY.
    - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
 
  - Ethernet SFPs / modules:
    - RollBall / Hilink / Turris 10G copper SFPs
    - HALNy GPON module
 
  - WiFi:
    - CYW43439 SDIO chipset (brcmfmac)
    - CYW89459 PCIe chipset (brcmfmac)
    - BCM4378 on Apple platforms (brcmfmac)
 
 Drivers
 -------
 
  - CAN:
    - gs_usb: HW timestamp support
 
  - Ethernet PHYs:
    - lan8814: cable diagnostics
 
  - Ethernet NICs:
    - Intel (100G):
      - implement control of FCS/CRC stripping
      - port splitting via devlink
      - L2TPv3 filtering offload
    - nVidia/Mellanox:
      - tunnel offload for sub-functions
      - MACSec offload, w/ Extended packet number and replay
        window offload
      - significantly restructure, and optimize the AF_XDP support,
        align the behavior with other vendors
    - Huawei:
      - configuring DSCP map for traffic class selection
      - querying standard FEC statistics
      - querying SerDes lane number via ethtool
    - Marvell/Cavium:
      - egress priority flow control
      - MACSec offload
    - AMD/SolarFlare:
      - PTP over IPv6 and raw Ethernet
    - small / embedded:
      - ax88772: convert to phylink (to support SFP cages)
      - altera: tse: convert to phylink
      - ftgmac100: support fixed link
      - enetc: standard Ethtool counters
      - macb: ZynqMP SGMII dynamic configuration support
      - tsnep: support multi-queue and use page pool
      - lan743x: Rx IP & TCP checksum offload
      - igc: add xdp frags support to ndo_xdp_xmit
 
  - Ethernet high-speed switches:
    - Marvell (prestera):
      - support SPAN port features (traffic mirroring)
      - nexthop object offloading
    - Microchip (sparx5):
      - multicast forwarding offload
      - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
 
  - Ethernet embedded switches:
    - Marvell (mv88e6xxx):
      - support RGMII cmode
    - NXP (felix):
      - standardized ethtool counters
    - Microchip (lan966x):
      - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
      - traffic policing and mirroring
      - link aggregation / bonding offload
      - QUSGMII PHY mode support
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - cold boot calibration support on WCN6750
    - support to connect to a non-transmit MBSSID AP profile
    - enable remain-on-channel support on WCN6750
    - Wake-on-WLAN support for WCN6750
    - support to provide transmit power from firmware via nl80211
    - support to get power save duration for each client
    - spectral scan support for 160 MHz
 
  - MediaTek WiFi (mt76):
    - WiFi-to-Ethernet bridging offload for MT7986 chips
 
  - RealTek WiFi (rtw89):
    - P2P support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmM7vtkACgkQMUZtbf5S
 Irvotg//dmh53rC+UMKO3OgOqPlSMnaqzbUdDEfN6mj4Mpox7Csb8zERVURHhBHY
 fvlXWsDgxmvgTebI5fvNC5+f1iW5xcqgJV2TWnNmDOKWwvQwb6qQfgixVmunvkpe
 IIukMXYt0dAf9bXeeEfbNXcCb85cPwB76stX0tMV6BX7osp3T0TL1fvFk0NJkL0j
 TeydLad/yAQtPb4TbeWYjNDoxPVDf0cVpUrevLGmWE88UMYmgTqPze+h1W5Wri52
 bzjdLklY/4cgcIZClHQ6F9CeRWqEBxvujA5Hj/cwOcn/ptVVJWUGi7sQo3sYkoSs
 HFu+F8XsTec14kGNC0Ab40eVdqs5l/w8+E+4jvgXeKGOtVns8DwoiUIzqXpyty89
 Ib04mffrwWNjFtHvo/kIsNwP05X2PGE9HUHfwsTUfisl/ASvMmQp7D7vUoqQC/4B
 AMVzT5qpjkmfBHYQQGuw8FxJhMeAOjC6aAo6censhXJyiUhIfleQsN0syHdaNb8q
 9RZlhAgQoVb6ZgvBV8r8unQh/WtNZ3AopwifwVJld2unsE/UNfQy2KyqOWBES/zf
 LP9sfuX0JnmHn8s1BQEUMPU1jF9ZVZCft7nufJDL6JhlAL+bwZeEN4yCiAHOPZqE
 ymSLHI9s8yWZoNpuMWKrI9kFexVnQFKmA3+quAJUcYHNMSsLkL8=
 =Gsio
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...
2022-10-04 13:38:03 -07:00
Linus Torvalds 7db99f01d1 - Print the CPU number at segfault time. The number printed is not
always accurate (preemption is enabled at that time) but the print string
   contains "likely" and after a lot of back'n'forth on this, this was the
   consensus that was reached. See thread starting at:
   https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com
 
 - After a *lot* of testing and polishing, finally the clear_user()
   improvements to inline REP; STOSB by default
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM780YACgkQEsHwGGHe
 VUoVmRAAhTTUYqe81XRAX1Egge1RVwXgZFZQQD54239IveLt80kpg1AFR697z3/G
 GSaL5dy9/LEwyE0r9u7VN1SuY3Bz8LEZLYfurKlGfMGv3mlcUedLSWHQNaNZ4+cx
 nwP1VjrfH80Qwn7l99hOZ7kwCRlUWdsamcMsv6n7Fq0YnM7vW6MgmQGlqCGADQKI
 GGElgn3VaU5pEXF4YtZE0qfy17dgkW+RJD7RlaAtzmKcdKYiKgfX0Mh9bkQ5VVcb
 973peg9GHKHoP0w54LYKNgF/WkYPpBwcNIkJW//aMLGS5ofalliu0W281okAhZ7w
 Sknnx+umoprCAV9ljn/HZbQnseXPXKlZWUxiwfEZD2fcBI6+60HK86zVSEvrYxNs
 COZRhpj/bwvOt5LtNj7dcV6cbbBvJJIEJSNazXHscds2zUh79fidzkjZ/Z0Hbo7D
 sr7SM80STaURGFPTLoD41z4TY3V2GH8JUbWG9+I4fBjmSDyX+tQKKJhH886MRSSW
 ZQ0pY1uhwF8QBMlp3t87pZ2gbdjMr40PSYJGU+Xqsb/khq7xOWnP1CiIkVUHLF2L
 n/hm6VF6ifwFstFhOBc8nTcz7kGqzKvlQssFpf+DAIl/b7mZ3AKHVIJxTpZ1hcis
 BqQdeNcVEcNCRZWFzrG5hCs0b7xtaJrI30RPSMsQP2IcaX+DNyg=
 =xLSS
 -----END PGP SIGNATURE-----

Merge tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cpu updates from Borislav Petkov:

 - Print the CPU number at segfault time.

   The number printed is not always accurate (preemption is enabled at
   that time) but the print string contains "likely" and after a lot of
   back'n'forth on this, this was the consensus that was reached. See
   thread at [1].

 - After a *lot* of testing and polishing, finally the clear_user()
   improvements to inline REP; STOSB by default

Link: https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com [1]

* tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Print likely CPU at segfault time
  x86/clear_user: Make it faster
2022-10-04 09:21:30 -07:00
Alexander Potapenko 40b22c9df2 objtool: kmsan: list KMSAN API functions as uaccess-safe
KMSAN inserts API function calls in a lot of places (function entries and
exits, local variables, memory accesses), so they may get called from the
uaccess regions as well.

KMSAN API functions are used to update the metadata (shadow/origin pages)
for kernel memory accesses.  The metadata pages for kernel pointers are
also located in the kernel memory, so touching them is not a problem.  For
userspace pointers, no metadata is allocated.

If an API function is supposed to read or modify the metadata, it does so
for kernel pointers and ignores userspace pointers.  If an API function is
supposed to return a pair of metadata pointers for the instrumentation to
use (like all __msan_metadata_ptr_for_TYPE_SIZE() functions do), it
returns the allocated metadata for kernel pointers and special dummy
buffers residing in the kernel memory for userspace pointers.

As a result, none of KMSAN API functions perform userspace accesses, but
since they might be called from UACCESS regions they use
user_access_save/restore().

Link: https://lkml.kernel.org/r/20220915150417.722975-32-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-03 14:03:23 -07:00
Sami Tolvanen 3c68a92d17 objtool: Disable CFI warnings
The __cfi_ preambles contain a mov instruction that embeds the KCFI
type identifier in the following format:

  ; type preamble
  __cfi_function:
    mov <id>, %eax
  function:
    ...

While the preamble symbols are STT_FUNC and contain valid
instructions, they are never executed and always fall through. Skip
the warning for them.

.kcfi_traps sections point to CFI traps in text sections. Also skip
the warning about them referencing !ENDBR instructions.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-18-samitolvanen@google.com
2022-09-26 10:13:15 -07:00
Sami Tolvanen 5141d3a06b objtool: Preserve special st_shndx indexes in elf_update_symbol
elf_update_symbol fails to preserve the special st_shndx values
between [SHN_LORESERVE, SHN_HIRESERVE], which results in it
converting SHN_ABS entries into SHN_UNDEF, for example. Explicitly
check for the special indexes and ensure these symbols are not
marked undefined.

Fixes: ead165fa10 ("objtool: Fix symbol creation")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-17-samitolvanen@google.com
2022-09-26 10:13:15 -07:00
Peter Zijlstra (Intel) 9440155ccb ftrace: Add HAVE_DYNAMIC_FTRACE_NO_PATCHABLE
x86 will shortly start using -fpatchable-function-entry for purposes
other than ftrace, make sure the __patchable_function_entry section
isn't merged in the mcount_loc section.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220903131154.420467-2-jolsa@kernel.org
2022-09-16 22:16:48 +02:00
Peter Zijlstra 7a7621dfa4 objtool,x86: Teach decode about LOOP* instructions
When 'discussing' control flow Masami mentioned the LOOP* instructions
and I realized objtool doesn't decode them properly.

As it turns out, these instructions are somewhat inefficient and as
such unlikely to be emitted by the compiler (a few vmlinux.o checks
can't find a single one) so this isn't critical, but still, best to
decode them properly.

Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yxhd4EMKyoFoH9y4@hirez.programming.kicks-ass.net
2022-09-15 16:13:55 +02:00
Linus Torvalds 2f23a7c914 Misc fixes:
- Fix PAT on Xen, which caused i915 driver failures
  - Fix compat INT 80 entry crash on Xen PV guests
  - Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs
  - Fix RSB stuffing regressions
  - Fix ORC unwinding on ftrace trampolines
  - Add Intel Raptor Lake CPU model number
  - Fix (work around) a SEV-SNP bootloader bug providing bogus values in
    boot_params->cc_blob_address, by ignoring the value on !SEV-SNP bootups.
  - Fix SEV-SNP early boot failure
  - Fix the objtool list of noreturn functions and annotate snp_abort(),
    which bug confused objtool on gcc-12.
  - Fix the documentation for retbleed
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmMLgUERHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hU1hAAj9bKO+D07gROpkRhXpLvbqm+mUqk6It8
 qEuyLkC/xvD9N//Pya0ZPPE+l23EHQxM/L0tXCYwsc8Zlx3fr678FQktHZuxULaP
 qlGmwub8PvsyMesXBGtgHJ4RT8L07FelBR+E/TpqCSbv/geM7mcc0ojyOKo+OmbD
 vbsUTDNqsMYndzePUBrv/vJRqVLGlbd1a22DKE/YiYBbZu5hughNUB0bHYhYdsml
 mutcRsVTKRbZOi4wiuY/pnveMf/z9wAwKOWd9EBaDWILygVSHkBJJQyhHigBh3F8
 H1hFn1q4ybULdrAUT4YND9Tjb6U8laU0fxg8Z43bay7bFXXElqoj3W2qka9NjAim
 QvWSFvTYQRTIWt6sCshVsUBWj6fBZdHxcJ8Fh+ucJJp+JWl9/aD0A41vK2Jx0LIt
 p8YzBRKEqd1Q/7QD855BArN7HNtQGgShNt4oPVZ7nPnjuQt0+lngu8NR+6X3RKpX
 r8rordyPvzgPL6W+1uV+8hnz1w+YU2xplAbK+zTijwgJVgyf8khSlZQNpFKULrou
 zjtzo/2nB+4C4bvfetNnaOGhi1/AdCHZHyZE35rotpd73SLHvdOrH0Ll9oCVfVrC
 UWbC1E67cHQw97Ni/4CrCsJRBULK01uyszVCxlEkSYInf0UsKlnmy+TqxizwsCVy
 reYQ0ePyWg0=
 =ZpCJ
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull misc x86 fixes from Ingo Molnar:

 - Fix PAT on Xen, which caused i915 driver failures

 - Fix compat INT 80 entry crash on Xen PV guests

 - Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs

 - Fix RSB stuffing regressions

 - Fix ORC unwinding on ftrace trampolines

 - Add Intel Raptor Lake CPU model number

 - Fix (work around) a SEV-SNP bootloader bug providing bogus values in
   boot_params->cc_blob_address, by ignoring the value on !SEV-SNP
   bootups.

 - Fix SEV-SNP early boot failure

 - Fix the objtool list of noreturn functions and annotate snp_abort(),
   which bug confused objtool on gcc-12.

 - Fix the documentation for retbleed

* tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/ABI: Mention retbleed vulnerability info file for sysfs
  x86/sev: Mark snp_abort() noreturn
  x86/sev: Don't use cc_platform_has() for early SEV-SNP calls
  x86/boot: Don't propagate uninitialized boot_params->cc_blob_address
  x86/cpu: Add new Raptor Lake CPU model number
  x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry
  x86/nospec: Fix i386 RSB stuffing
  x86/nospec: Unwreck the RSB stuffing
  x86/bugs: Add "unknown" reporting for MMIO Stale Data
  x86/entry: Fix entry_INT80_compat for Xen PV guests
  x86/PAT: Have pat_enabled() properly reflect state when running on Xen
2022-08-28 10:10:23 -07:00
Borislav Petkov c93c296fff x86/sev: Mark snp_abort() noreturn
Mark both the function prototype and definition as noreturn in order to
prevent the compiler from doing transformations which confuse objtool
like so:

  vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction

This triggers with gcc-12.

Add it and sev_es_terminate() to the objtool noreturn tracking array
too. Sort it while at it.

Suggested-by: Michael Matz <matz@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
2022-08-25 15:54:03 +02:00
Josh Poimboeuf 3c6f390080 objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warning
This warning isn't very useful: why would you put ANNOTATE_NOENDBR on
ENDBR, and if you did, what's the harm?

And thus far it's only found one non-bug, where the
'__end_entry_SYSENTER_compat' label happens to land on the ENDBR from
entry_SYSCALL_compat:

  vmlinux.o: warning: objtool: entry_SYSCALL_compat+0x0: ANNOTATE_NOENDBR on ENDBR

.. which is fine.  Just remove the warning.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/142341a5dafdfc788e4c95b9e226a6eefc9b626e.1660839773.git.jpoimboe@kernel.org
2022-08-19 19:47:57 +02:00
Chen Zhongjin 7b3e318690 objtool: Use arch_jump_destination() in read_intra_function_calls()
Use arch_jump_destiation() instead of the open-coded 'offset + len +
immediate' that is x86 specific.

Avoids future trouble with other architectures.

Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220818014553.220261-1-chenzhongjin@huawei.com
2022-08-19 19:47:56 +02:00
Josh Poimboeuf e27e5bea95 x86/ibt, objtool: Add IBT_NOSEAL()
Add a macro which prevents a function from getting sealed if there are
no compile-time references to it.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <20220818213927.e44fmxkoq4yj6ybn@treble>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-19 04:05:42 -04:00
Borislav Petkov 0db7058e8e x86/clear_user: Make it faster
Based on a patch by Mark Hemment <markhemm@googlemail.com> and
incorporating very sane suggestions from Linus.

The point here is to have the default case with FSRM - which is supposed
to be the majority of x86 hw out there - if not now then soon - be
directly inlined into the instruction stream so that no function call
overhead is taking place.

Drop the early clobbers from the @size and @addr operands as those are
not needed anymore since we have single instruction alternatives.

The benchmarks I ran would show very small improvements and a PF
benchmark would even show weird things like slowdowns with higher core
counts.

So for a ~6m running the git test suite, the function gets called under
700K times, all from padzero():

  <...>-2536    [006] .....   261.208801: padzero: to: 0x55b0663ed214, size: 3564, cycles: 21900
  <...>-2536    [006] .....   261.208819: padzero: to: 0x7f061adca078, size: 3976, cycles: 17160
  <...>-2537    [008] .....   261.211027: padzero: to: 0x5572d019e240, size: 3520, cycles: 23850
  <...>-2537    [008] .....   261.211049: padzero: to: 0x7f1288dc9078, size: 3976, cycles: 15900
   ...

which is around 1%-ish of the total time and which is consistent with
the benchmark numbers.

So Mel gave me the idea to simply measure how fast the function becomes.
I.e.:

  start = rdtsc_ordered();
  ret = __clear_user(to, n);
  end = rdtsc_ordered();

Computing the mean average of all the samples collected during the test
suite run then shows some improvement:

  clear_user_original:
  Amean: 9219.71 (Sum: 6340154910, samples: 687674)

  fsrm:
  Amean: 8030.63 (Sum: 5522277720, samples: 687652)

That's on Zen3.

The situation looks a lot more confusing on Intel:

Icelake:

  clear_user_original:
  Amean: 19679.4 (Sum: 13652560764, samples: 693750)
  Amean: 19743.7 (Sum: 13693470604, samples: 693562)

(I ran it twice just to be sure.)

  ERMS:
  Amean: 20374.3 (Sum: 13910601024, samples: 682752)
  Amean: 20453.7 (Sum: 14186223606, samples: 693576)

  FSRM:
  Amean: 20458.2 (Sum: 13918381386, sample s: 680331)

The original microbenchmark which people were complaining about:

  for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=65536; done 2>&1 | grep copied
  32207011840 bytes (32 GB, 30 GiB) copied, 1 s, 32.2 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.93069 s, 35.6 GB/s
  37597741056 bytes (38 GB, 35 GiB) copied, 1 s, 37.6 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.78017 s, 38.6 GB/s
  62020124672 bytes (62 GB, 58 GiB) copied, 2 s, 31.0 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 2.13716 s, 32.2 GB/s
  60010004480 bytes (60 GB, 56 GiB) copied, 1 s, 60.0 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.14129 s, 60.2 GB/s
  53212086272 bytes (53 GB, 50 GiB) copied, 1 s, 53.2 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.28398 s, 53.5 GB/s
  55698259968 bytes (56 GB, 52 GiB) copied, 1 s, 55.7 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.22507 s, 56.1 GB/s
  55306092544 bytes (55 GB, 52 GiB) copied, 1 s, 55.3 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.23647 s, 55.6 GB/s
  54387539968 bytes (54 GB, 51 GiB) copied, 1 s, 54.4 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.25693 s, 54.7 GB/s
  50566529024 bytes (51 GB, 47 GiB) copied, 1 s, 50.6 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.35096 s, 50.9 GB/s
  58308165632 bytes (58 GB, 54 GiB) copied, 1 s, 58.3 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.17394 s, 58.5 GB/s

Now the same thing with smaller buffers:

  for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=8192; done 2>&1 | grep copied
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28485 s, 30.2 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276112 s, 31.1 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.29136 s, 29.5 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.283803 s, 30.3 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.306503 s, 28.0 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.349169 s, 24.6 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276912 s, 31.0 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.265356 s, 32.4 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28464 s, 30.2 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.242998 s, 35.3 GB/s

is also not conclusive because it all depends on the buffer sizes,
their alignments and when the microcode detects that cachelines can be
aggregated properly and copied in bigger sizes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/CAHk-=wh=Mu_EYhtOmPn6AxoQZyEh-4fo2Zx3G7rBv1g7vwoKiw@mail.gmail.com
2022-08-18 12:36:42 +02:00
Linus Torvalds aad26f55f4 This was a moderately busy cycle for documentation, but nothing all that
earth-shaking:
 
 - More Chinese translations, and an update to the Italian translations.
   The Japanese, Korean, and traditional Chinese translations are
   more-or-less unmaintained at this point, instead.
 
 - Some build-system performance improvements.
 
 - The removal of the archaic submitting-drivers.rst document, with the
   movement of what useful material that remained into other docs.
 
 - Improvements to sphinx-pre-install to, hopefully, give more useful
   suggestions.
 
 - A number of build-warning fixes
 
 Plus the usual collection of typo fixes, updates, and more.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmLn9OwPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YtrwIAJNZoDYJJIRuVHnFkAn5EJ4b/chnR1dSTBtn
 WdE/1zdAlMBWVlEGO48VZybph9Sk0v+cUGf+yviDgASQrfOhRRTkg/0u6XaBAYO0
 +C2D1QDd9DggGgajxsfJfTdD3IuB78mGmCQvP17XIJW+NK1CK9rXZBnj6WC5/HJw
 PCHzeeVreBxOS3W9GelMYa6vjVl7dv81x4DPllnsgU2AMk0/Ce0MVjeIZ695sOeP
 Ki6jZgC2GsgFSK5kBC35OiDe5q+fDzlLfek34EUCn4SIbMALSUYWO1db122w5Pme
 Ej0+UTBhD19WH1uB/rcVKnVWugi7UEUJexZsao+nC7UrdIVtYq0=
 =83BG
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.0' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "This was a moderately busy cycle for documentation, but nothing
  all that earth-shaking:

   - More Chinese translations, and an update to the Italian
     translations.

     The Japanese, Korean, and traditional Chinese translations
     are more-or-less unmaintained at this point, instead.

   - Some build-system performance improvements.

   - The removal of the archaic submitting-drivers.rst document,
     with the movement of what useful material that remained into
     other docs.

   - Improvements to sphinx-pre-install to, hopefully, give more
     useful suggestions.

   - A number of build-warning fixes

  Plus the usual collection of typo fixes, updates, and more"

* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
  docs: efi-stub: Fix paths for x86 / arm stubs
  Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
  Docs/zh_CN: Update the translation of pci to 5.19-rc8
  Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
  Docs/zh_CN: Update the translation of usage to 5.19-rc8
  Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
  Docs/zh_CN: Update the translation of sparse to 5.19-rc8
  Docs/zh_CN: Update the translation of kasan to 5.19-rc8
  Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
  doc:it_IT: align Italian documentation
  docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
  Documentation: process: Update email client instructions for Thunderbird
  docs: ABI: correct QEMU fw_cfg spec path
  doc/zh_CN: remove submitting-driver reference from docs
  docs: zh_TW: align to submitting-drivers removal
  docs: zh_CN: align to submitting-drivers removal
  docs: ko_KR: howto: remove reference to removed submitting-drivers
  docs: ja_JP: howto: remove reference to removed submitting-drivers
  docs: it_IT: align to submitting-drivers removal
  docs: process: remove outdated submitting-drivers.rst
  ...
2022-08-02 19:24:24 -07:00
Linus Torvalds ce114c8668 Just when you thought that all the speculation bugs were addressed and
solved and the nightmare is complete, here's the next one: speculating
 after RET instructions and leaking privileged information using the now
 pretty much classical covert channels.
 
 It is called RETBleed and the mitigation effort and controlling
 functionality has been modelled similar to what already existing
 mitigations provide.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmLKqAgACgkQEsHwGGHe
 VUoM5w/8CSvwPZ3otkhmu8MrJPtWc7eLDPjYN4qQP+19e+bt094MoozxeeWG2wmp
 hkDJAYHT2Oik/qDuEdhFgNYwS7XGgbV3Py3B8syO4//5SD5dkOSG+QqFXvXMdFri
 YsVqqNkjJOWk/YL9Ql5RS/xQewsrr0OqEyWWocuI6XAvfWV4kKvlRSd+6oPqtZEO
 qYlAHTXElyIrA/gjmxChk1HTt5HZtK3uJLf4twNlUfzw7LYFf3+sw3bdNuiXlyMr
 WcLXMwGpS0idURwP3mJa7JRuiVBzb4+kt8mWwWqA02FkKV45FRRRFhFUsy667r00
 cdZBaWdy+b7dvXeliO3FN/x1bZwIEUxmaNy1iAClph4Ifh0ySPUkxAr8EIER7YBy
 bstDJEaIqgYg8NIaD4oF1UrG0ZbL0ImuxVaFdhG1hopQsh4IwLSTLgmZYDhfn/0i
 oSqU0Le+A7QW9s2A2j6qi7BoAbRW+gmBuCgg8f8ECYRkFX1ZF6mkUtnQxYrU7RTq
 rJWGW9nhwM9nRxwgntZiTjUUJ2HtyXEgYyCNjLFCbEBfeG5QTg7XSGFhqDbgoymH
 85vsmSXYxgTgQ/kTW7Fs26tOqnP2h1OtLJZDL8rg49KijLAnISClEgohYW01CWQf
 ZKMHtz3DM0WBiLvSAmfGifScgSrLB5AjtvFHT0hF+5/okEkinVk=
 =09fW
 -----END PGP SIGNATURE-----

Merge tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 retbleed fixes from Borislav Petkov:
 "Just when you thought that all the speculation bugs were addressed and
  solved and the nightmare is complete, here's the next one: speculating
  after RET instructions and leaking privileged information using the
  now pretty much classical covert channels.

  It is called RETBleed and the mitigation effort and controlling
  functionality has been modelled similar to what already existing
  mitigations provide"

* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  x86/speculation: Disable RRSBA behavior
  x86/kexec: Disable RET on kexec
  x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
  x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
  x86/bugs: Add Cannon lake to RETBleed affected CPU list
  x86/retbleed: Add fine grained Kconfig knobs
  x86/cpu/amd: Enumerate BTC_NO
  x86/common: Stamp out the stepping madness
  KVM: VMX: Prevent RSB underflow before vmenter
  x86/speculation: Fill RSB on vmexit for IBRS
  KVM: VMX: Fix IBRS handling after vmexit
  KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
  KVM: VMX: Convert launched argument to flags
  KVM: VMX: Flatten __vmx_vcpu_run()
  objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
  x86/speculation: Remove x86_spec_ctrl_mask
  x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
  x86/speculation: Fix SPEC_CTRL write on SMT state change
  x86/speculation: Fix firmware entry SPEC_CTRL handling
  x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
  ...
2022-07-11 18:15:25 -07:00
Mauro Carvalho Chehab d6a21f2d73 objtool: update objtool.txt references
Changeset a8e35fece4 ("objtool: Update documentation")
renamed: tools/objtool/Documentation/stack-validation.txt
to: tools/objtool/Documentation/objtool.txt.

Update the cross-references accordingly.

Fixes: a8e35fece4 ("objtool: Update documentation")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/ec285ece6348a5be191aebe45f78d06b3319056b.1656234456.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-07-07 13:10:00 -06:00
Peter Zijlstra 38e0e4d04d x86/ibt, objtool: Don't discard text references from tracepoint section
On Tue, Jun 28, 2022 at 04:28:58PM +0800, Pengfei Xu wrote:

> # ./ftracetest
> === Ftrace unit tests ===
> [1] Basic trace file check      [PASS]
> [2] Basic test for tracers      [PASS]
> [3] Basic trace clock test      [PASS]
> [4] Basic event tracing check   [PASS]
> [5] Change the ringbuffer size  [PASS]
> [6] Snapshot and tracing setting        [PASS]
> [7] trace_pipe and trace_marker [PASS]
> [8] Test ftrace direct functions against tracers        [UNRESOLVED]
> [9] Test ftrace direct functions against kprobes        [UNRESOLVED]
> [10] Generic dynamic event - add/remove eprobe events   [FAIL]
> [11] Generic dynamic event - add/remove kprobe events
>
> It 100% reproduced in step 11 and then missing ENDBR BUG generated:
> "
> [ 9332.752836] mmiotrace: enabled CPU7.
> [ 9332.788612] mmiotrace: disabled.
> [ 9337.103426] traps: Missing ENDBR: syscall_regfunc+0x0/0xb0

It turns out that while syscall_regfunc() does have an ENDBR when
generated, it gets sealed by objtool's .ibt_endbr_seal list.

Since the only text references to this function:

  $ git grep syscall_regfunc
  include/linux/tracepoint.h:extern int syscall_regfunc(void);
  include/trace/events/syscalls.h:        syscall_regfunc, syscall_unregfunc
  include/trace/events/syscalls.h:        syscall_regfunc, syscall_unregfunc
  kernel/tracepoint.c:int syscall_regfunc(void)

appear in the __tracepoint section which is excluded by objtool.

Fixes: 3c6f9f77e6 ("objtool: Rework ibt and extricate from stack validation")
Reported-by: Pengfei Xu <pengfei.xu@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yrrepdaow4F5kqG0@hirez.programming.kicks-ass.net
2022-07-07 13:26:54 +02:00
Peter Zijlstra f43b9876e8 x86/retbleed: Add fine grained Kconfig knobs
Do fine-grained Kconfig for all the various retbleed parts.

NOTE: if your compiler doesn't support return thunks this will
silently 'upgrade' your mitigation to IBPB, you might not like this.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-29 17:43:41 +02:00
Josh Poimboeuf 8faea26e61 objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
Commit

  c536ed2fff ("objtool: Remove SAVE/RESTORE hints")

removed the save/restore unwind hints because they were no longer
needed. Now they're going to be needed again so re-add them.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27 10:34:00 +02:00
Peter Zijlstra a09a6e2399 objtool: Add entry UNRET validation
Since entry asm is tricky, add a validation pass that ensures the
retbleed mitigation has been done before the first actual RET
instruction.

Entry points are those that either have UNWIND_HINT_ENTRY, which acts
as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or
those that have UWIND_HINT_IRET_REGS at +0.

This is basically a variant of validate_branch() that is
intra-function and it will simply follow all branches from marked
entry points and ensures that all paths lead to ANNOTATE_UNRET_END.

If a path hits RET or an indirection the path is a fail and will be
reported.

There are 3 ANNOTATE_UNRET_END instances:

 - UNTRAIN_RET itself
 - exception from-kernel; this path doesn't need UNTRAIN_RET
 - all early exceptions; these also don't need UNTRAIN_RET

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27 10:34:00 +02:00
Peter Zijlstra 9bb2ec608a objtool: Update Retpoline validation
Update retpoline validation with the new CONFIG_RETPOLINE requirement of
not having bare naked RET instructions.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27 10:33:59 +02:00