A static mapped area is ARM-specific, so it is better not to use
generic vmalloc data structure, that is, vmlist and vmlist_lock
for managing static mapped area. And it causes some needless overhead and
reducing this overhead is better idea.
Now, we have newly introduced static_vm infrastructure.
With it, we don't need to iterate all mapped areas. Instead, we just
iterate static mapped areas. It helps to reduce an overhead of finding
matched area. And architecture dependency on vmalloc layer is removed,
so it will help to maintainability for vmalloc layer.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In current implementation, we used ARM-specific flag, that is,
VM_ARM_STATIC_MAPPING, for distinguishing ARM specific static mapped area.
The purpose of static mapped area is to re-use static mapped area when
entire physical address range of the ioremap request can be covered
by this area.
This implementation causes needless overhead for some cases.
For example, assume that there is only one static mapped area and
vmlist has 300 areas. Every time we call ioremap, we check 300 areas for
deciding whether it is matched or not. Moreover, even if there is
no static mapped area and vmlist has 300 areas, every time we call
ioremap, we check 300 areas in now.
If we construct a extra list for static mapped area, we can eliminate
above mentioned overhead.
With a extra list, if there is one static mapped area,
we just check only one area and proceed next operation quickly.
In fact, it is not a critical problem, because ioremap is not frequently
used. But reducing overhead is better idea.
Another reason for doing this work is for removing architecture dependency
on vmalloc layer. I think that vmlist and vmlist_lock is internal data
structure for vmalloc layer. Some codes for debugging and stat inevitably
use vmlist and vmlist_lock. But it is preferable that they are used
as least as possible in outside of vmalloc.c
Now, I introduce an ARM-specific infrastructure for static mapped area. In
the following patch, we will use this and resolve above mentioned problem.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Now, there is no user for vmregion.
So remove it.
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Parts of the virtual memory layout (mainly the modules area) are
described using open-coded immediate values.
Use the SZ_ definitions from linux/sizes.h instead to make the code
clearer.
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
MACH_MX31ADS_WM1133_EV1 already depends on REGULATOR_WM8350,
but that still allows REGULATOR_WM8350 to be a loadable
module. Depending on REGULATOR_WM8350 to be built-in
ensures we cannot create a broken configuration.
Without this patch, building allmodconfig results in:
arch/arm/mach-imx/built-in.o: In function `mx31_wm8350_init':
arch/arm/mach-imx/mach-mx31ads.c:461: undefined reference to `wm8350_register_regulator'
arch/arm/mach-imx/mach-mx31ads.c:471: undefined reference to `wm8350_dcdc_set_slot'
arch/arm/mach-imx/mach-mx31ads.c:473: undefined reference to `wm8350_isink_set_flash'
arch/arm/mach-imx/mach-mx31ads.c:480: undefined reference to `wm8350_dcdc25_set_mode'
arch/arm/mach-imx/mach-mx31ads.c:485: undefined reference to `wm8350_register_led'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Patch 8a4da6e "arm: arch_timer: move core to drivers/clocksource"
moved a lot of code out of arch_timer.c, but ended up deleting
too much, which broke some configurations.
Obviously, include linux/errno.h is required to return error
values.
Without this patch, building allmodconfig results in:
arch/arm/kernel/arch_timer.c: In function 'arch_timer_sched_clock_init':
arch/arm/kernel/arch_timer.c:55:11: error: 'ENXIO' undeclared (first use in this function)
arch/arm/kernel/arch_timer.c:55:11: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
* 'next/cpufreq-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
cpufreq: exynos: Fix hang in pm handler due to frequency mismatch
cpufreq: exynos: Initialize return variable
cpufreq: exynos: Fix unsigned variable being checked for negative value
cpufreq: exynos: Get booting freq value in exynos_cpufreq_init
cpufreq: exynos: Show list of available frequencies
cpufreq: exynos: Add missing static
cpufreq: exynos: Split exynos_target function into two functions
cpufreq: exynos: Use APLL_FREQ macro for cpu divider value
cpufreq: exynos: Check old & new frequency early
cpufreq: exynos: Remove unused variable & IS_ERR
* pm-cpufreq: (55 commits)
cpufreq / intel_pstate: Fix 32 bit build
cpufreq: conservative: Fix typos in comments
cpufreq: ondemand: Fix typos in comments
cpufreq: exynos: simplify .init() for setting policy->cpus
cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs
cpufreq/x86: Add P-state driver for sandy bridge.
cpufreq_stats: do not remove sysfs files if frequency table is not present
cpufreq: Do not track governor name for scaling drivers with internal governors.
cpufreq: Only call cpufreq_out_of_sync() for driver that implement cpufreq_driver.target()
cpufreq: Retrieve current frequency from scaling drivers with internal governors
cpufreq: Fix locking issues
cpufreq: Create a macro for unlock_policy_rwsem{read,write}
cpufreq: Remove unused HOTPLUG_CPU code
cpufreq: governors: Fix WARN_ON() for multi-policy platforms
cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold
cpufreq / stats: Get rid of CPUFREQ_STATDEVICE_ATTR
cpufreq: Don't check cpu_online(policy->cpu)
cpufreq: add imx6q-cpufreq driver
cpufreq: Don't remove sysfs link for policy->cpu
cpufreq: Remove unnecessary use of policy->shared_type
...
The newly created omap_hwmod_reset.c is missing an
include of linux/errno.h in commit c02060d8 "ARM:
OMAP4+: AESS: enable internal auto-gating during
initial setup". It still works in omap2_defconfig,
but not in all other combinations.
Without this patch, building allmodconfig results in:
arch/arm/mach-omap2/omap_hwmod_reset.c: In function 'omap_hwmod_aess_preprogram':
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: error: 'EINVAL' undeclared (first use in this function)
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Sebastien Guiriec <s-guiriec@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRAuO3AAoJEHm+PkMAQRiGbfAH/1C3QQKB11aBpYLAw7qijAze
yOui26UCnwRryxsO8zBCQjGoByy5DvY/Q0zyUCWUE6nf/JFSoKGUHzfJ1ATyzGll
3vENP6Fnmq0Hgc4t8/gXtXrZ1k/c43cYA2XEhDnEsJlFNmNj2wCQQj9njTNn2cl1
k6XhZ9U1V2hGYpLL5bmsZiLVI6dIpkCVw8d4GZ8BKxSLUacVKMS7ml2kZqxBTMgt
AF6T2SPagBBxxNq8q87x4b7vyHYchZmk+9tAV8UMs1ecimasLK8vrRAJvkXXaH1t
xgtR0sfIp5raEjoFYswCK+cf5NEusLZDKOEvoABFfEgL4/RKFZ8w7MMsmG8m0rk=
=m68Y
-----END PGP SIGNATURE-----
Merge branch 'omap/multiplatform-fixes', tag 'v3.8-rc5' into next/multiplatform
The omap multiplatform support uncovered a bug in the cwdavinci_cpdma
code and was missing two drivers that are enabled now but are not
quite ready for multiplatform, as found by allyesconfig builds.
There is also a conflict generated by automated merge in
arch/arm/mach-omap2/drm.c between a bug fix that went into v3.8-rc5
and a different version of the same fix that went into the
omap/multiplatform branch. This merge removes the extraneous
#include that was causing build errors.
* omap/multiplatform-fixes:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patch 16559ae "kgdb: remove #include <linux/serial_8250.h> from kgdb.h"
removed an implicit inclusion of linux/platform_device.h
In a number of places. This adds back explicit inclusions in a few
more places I found.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch "16559ae kgdb: remove #include <linux/serial_8250.h> from kgdb.h
caused assabet_defconfig to fail, since assabet.c did not
itself include linux/platform_device.h, although it needs it:
In file included from include/linux/mfd/ucb1x00.h:13:0,
from arch/arm/mach-sa1100/assabet.c:19:
include/linux/mfd/mcp.h:22:16: error: field 'attached_device' has incomplete type
include/linux/mfd/mcp.h:48:23: error: field 'drv' has incomplete type
In file included from arch/arm/mach-sa1100/assabet.c:19:0:
include/linux/mfd/ucb1x00.h:137:16: error: field 'dev' has incomplete type
arch/arm/mach-sa1100/assabet.c: In function 'assabet_init':
arch/arm/mach-sa1100/assabet.c:343:3: error: implicit declaration of function 'platform_device_register_simple' [-Wimplicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original code was generating an lsl instructions using the value
of ARM_R8 (skb_headlen, possibly uninitialized if no skb_headlen
access was required) as a shift amount.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Acked-by: Mircea Gherzan <mgherzan@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
__ARCH_WANT_SYS_RT_SIGACTION,
__ARCH_WANT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore
CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} -
can be assumed always set.
These are fixes for compiler warnings that for the most
part were introduced during the 3.8 cycle but are otherwise
harmless.
* warning-fixes:
scripts/sortextable: silence script output
ARM: s3c: i2c: add platform_device forward declaration
ARM: mvebu: allow selecting mvebu without Armada XP
ARM: pick Versatile by default for !MMU
ARM: integrator: fix build with INTEGRATOR_AP off
ARM: integrator/versatile: fix NOMMU warnings
ARM: sa1100: don't warn about mach/ide.h
ARM: shmobile: fix defconfig warning on CONFIG_USB
ARM: w90x900: fix legacy assembly syntax
ARM: samsung: fix assembly syntax for new gas
ARM: disable virt_to_bus/virt_to_bus almost everywhere
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Selecting only CONFIG_ARCH_MVEBU but not the respective
options for Armada 370 or Armada XP results in these
link errors:
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_smp_init_cpus':
arch/arm/mach-mvebu/platsmp.c:91: undefined reference to `coherency_get_cpu_count'
arch/arm/mach-mvebu/platsmp.c:104: undefined reference to `armada_mpic_send_doorbell'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_smp_prepare_cpus':
arch/arm/mach-mvebu/platsmp.c:111: undefined reference to `set_cpu_coherent'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_boot_secondary':
arch/arm/mach-mvebu/platsmp.c:83: undefined reference to `armada_xp_boot_cpu'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_secondary_init':
arch/arm/mach-mvebu/platsmp.c:75: undefined reference to `armada_xp_mpic_smp_cpu_init'
arch/arm/mach-mvebu/built-in.o: In function `armada_xp_secondary_startup':
arch/arm/mach-mvebu/headsmp.S:46: undefined reference to `ll_set_cpu_coherent'
We can solve this by enabling all common MVEBU files that are
referenced by the SMP files. This means we enable code that
is not going to be used without a machine descriptor referencing
it, but only if the kernel is configured specifically for this
case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
The introduction of ARCH_MULTIPLATFORM changed
the default for nommu kernels from Versatile to
Integrator, which is less common, and does not
currently build for allnoconfig because that does
not select any of the CPUs.
This also ensures that at least one of the three
board files in versatile are enabled, which lets
us successfully build an allnoconfig kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
The conditional declaration of ap_uart_data is broken
and causes this build error:
In file included from arch/arm/mach-integrator/core.c:35:0:
arch/arm/mach-integrator/common.h:6:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before '{' token
Turning the check into an constant-expression if(IS_ENABLED()) statement
creates more readable code and solves this problem as well.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
On NOMMU kernels, the io_desc variables are unused
because we don't use the MMU to remap the MMIO
areas.
Marking these variables as __maybe_unused easily
avoids the otherwise harmless warnings like
warning: 'versatile_io_desc' defined but not used
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
This warning has existed since before the start of (git) history.
Apparently nobody has bothered to fix it in a long time, and
this is unlikely to change. Note that the file that the warning
refers to has moved to a different location and was subsequently
deleted in 2008.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
A recent update to the marzen_defconfig introduced a
duplicate CONFIG_USB=y line. This removes one of the
two.
arch/arm/configs/marzen_defconfig:86:warning: override: reassigning to symbol USB
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: linux-sh@vger.kernel.org
New ARM binutils don't allow extraneous whitespace inside
of brackets, which causes this error on all mach-w90x900
defconfigs:
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]'
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]'
This removes the whitespace in order to build the kernel
again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Wan ZongShun <mcuos.com@gmail.com>
We are getting a number of warnings about the use of the deprecated
bus_to_virt function in drivers using the ARM ISA DMA API:
drivers/parport/parport_pc.c: In function 'parport_pc_fifo_write_block_dma':
drivers/parport/parport_pc.c:622:3: warning: 'bus_to_virt' is deprecated
(declared at arch/arm/include/asm/memory.h:253) [-Wdeprecated-declarations]
This is only because that function gets used by the inline
set_dma_addr() helper. We know that any driver for the ISA DMA API
is correctly using the DMA addresses, so we can change this
to use the __bus_to_virt() function instead, which does not warn.
After this, there are no remaining drivers that are used on
any defconfigs on ARM using virt_to_bus or bus_to_virt, with
the exception of the OSS sound driver. That driver is only used
on RiscPC, NetWinder and Shark, so we can set ARCH_NO_VIRT_TO_BUS
on all other platforms and hide the deprecated functions, which
is far more effective than marking them as deprecated, in order
to avoid any new users of that code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Patch 92cb7625 "ARM: kirkwood: nsa310: cleanup includes and
unneeded code" was a little too quick, since there is still
an I2C_BOARD_INFO left in this file at the moment. Once
that is gone and replaced by a DT description of the devices,
the inclusion can be removed again
Without this patch, building kirkwood_defconfig results in:
arch/arm/mach-kirkwood/board-nsa310.c:42:74: error: array type has incomplete element type
arch/arm/mach-kirkwood/board-nsa310.c:43:2: error: implicit declaration of function 'I2C_BOARD_INFO' [-Werror=implicit-function-declaration]
arch/arm/mach-kirkwood/board-nsa310.c: In function 'nsa310_gpio_init':
arch/arm/mach-kirkwood/board-nsa310.c:71:3: error: 'pm_power_off' undeclared (first use in this function)
arch/arm/mach-kirkwood/board-nsa310.c:71:3: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/mach-kirkwood/board-nsa310.c: In function 'nsa310_init':
arch/arm/mach-kirkwood/board-nsa310.c:83:2: error: implicit declaration of function 'i2c_register_board_info' [-Werror=implicit-function-declaration]
arch/arm/mach-kirkwood/board-nsa310.c:83:121: error: negative width in bit-field '<anonymous>'
arch/arm/mach-kirkwood/board-nsa310.c: At top level:
arch/arm/mach-kirkwood/board-nsa310.c:42:74: warning: 'nsa310_i2c_info' defined but not used [-Wunused-variable]
cc1: some warnings being treated as errors
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
The code in arch/arm/mach-prima2/headsmp.S is used for
both boot time initialization and for cpu hotplug,
so it must not be discarded after the initial boot
is complete. This replaces the __INIT annotation
with __CPUINIT, and marks the sirfsoc_cpu_die as
__ref to annotate that it correctly uses the sections.
Without this patch, building prima2_defconfig results in:
WARNING: arch/arm/mach-prima2/built-in.o(.cpuinit.text+0x130): Section mismatch in reference from the function sirfsoc_boot_secondary() to the function .init.text:sirfsoc_secondary_startup()
The function __cpuinit sirfsoc_boot_secondary() references
a function __init sirfsoc_secondary_startup().
If sirfsoc_secondary_startup is only used by sirfsoc_boot_secondary then
annotate sirfsoc_secondary_startup with a matching annotation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Barry Song <baohua.song@csr.com>
Let's have a single platform data structure for the OMAP's High-Speed
USB host subsystem instead of having 3 separate ones i.e. one for
board data, one for USB Host (UHH) module and one for USB-TLL module.
This makes the code much simpler and avoids creating multiple copies of
platform data.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
The assignment of clock_event_device::broadcast can be done by timer
core as of 12ad100046: "clockevents: Add generic timer broadcast
function", and the arm code moved over to this as of 3d06770eef: "arm:
Add generic timer broadcast support", but left a dangling #define when
!CONFIG_GENERIC_TIMER_BROADCAST.
This patch removes the now unused #define.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use the future proof TWL_MODULE_PWM module id instead to aim the twl-core
cleanup planed for 3.9 kernel cycle.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Currently, the serial nodes define both a clock-frequency and a clocks
property. We should not provide both, since they might conflict.
In practice, this also causes problems since the of_serial driver uses
the clock-frequency property in preference to the clocks property, and
hence doesn't clk_prepare_enable() the clock, which may then leave it
with no known users, and hence the common clock framework will disable
it, thus breaking the port, which is usually the console.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Some OMAP4 power management fixes and audio device integration
patches. This pull request contains a fix for an issue discovered during
branch integration.
Basic test logs are available at:
http://www.pwsan.com/omap/testlogs/omap4_prcm_devel_a_3.9/20130210112717/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Qbkt
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/pm-omap4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
omap4 pm changes via Paul Walmsley <paul@pwsan.com>:
Some OMAP4 power management fixes and audio device integration
patches. This pull request contains a fix for an issue discovered during
branch integration.
Basic test logs are available at:
http://www.pwsan.com/omap/testlogs/omap4_prcm_devel_a_3.9/20130210112717/
* tag 'omap-for-v3.9/pm-omap4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: Enable AESS hwmod device
ARM: OMAP4: hwmod data: Update AESS data with memory bank area
ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
ASoC: TI AESS: add autogating-enable function, callable from architecture code
ARM: OMAP2+: hwmod: add enable_preprogram hook
ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
ARM: OMAP4: PM: Warn users about usage of older bootloaders
Some miscellaneous OMAP2+ clock fixes, mostly related to the recent
common clock framework conversion.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/clock_devel_a_3.9/20130208120108/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=4h7x
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/clock-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
omap clock changes via Paul Walmsley <paul@pwsan.com>:
Some miscellaneous OMAP2+ clock fixes, mostly related to the recent
common clock framework conversion.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/clock_devel_a_3.9/20130208120108/
* tag 'omap-for-v3.9/clock-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
ARM: OMAP AM33XX: clock data: SET_RATE_PARENT in lcd path
ARM: OMAP2+: clock data: add DEFINE_STRUCT_CLK_FLAGS helper
ARM: OMAP2+: dpll: am335x - avoid freqsel
omap3isp: Set cam_mclk rate directly
ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5
On OMAP2+ devices, standardize and clean up WFI entry and WFI blocking.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
Conflicts:
arch/arm/mach-omap2/pm24xx.c
Note that this is based on earlier omap-for-v3.9/pm-signed because
of a non-trivial merge conflict. This branch also contains a fix
for c1d1cd59 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats
and early_device code").
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=lEfd
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/pm-wfi-take2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
omap pm wfi changes via Paul Walmsley <paul@pwsan.com>:
On OMAP2+ devices, standardize and clean up WFI entry and WFI blocking.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
Conflicts:
arch/arm/mach-omap2/pm24xx.c
Note that this is based on earlier omap-for-v3.9/pm-signed because
of a non-trivial merge conflict. This branch also contains a fix
for c1d1cd59 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats
and early_device code").
* tag 'omap-for-v3.9/pm-wfi-take2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
ARM: OMAP AM3517/05: hwmod data: block WFI when EMAC active
ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active
ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions
ARM: OMAP2xxx: CM: remove autodep handling
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock
ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code
ARM: OMAP2: PM/powerdomain: drop unnecessary pwrdm_wait_transition()
ARM: OMAP2xxx: PM: clean up some crufty powerstate programming code
ARM: OMAP2+: clockdomain: add pwrdm_state_switch() call to clkdm_sleep()
ARM: OMAP2+: powerdomain: fix powerdomain trace integration
ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control
ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle()
ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active
ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
ARM: OMAP3xxx: CPUIdle: simplify the PER next-state code
...
Fixes and IP block support for the TI AM33xx family of SoCs. These
are prerequisites for power management and some PWM driver changes.
Basic test logs are available from:
http://www.pwsan.com/omap/testlogs/am33xx_fixes_a_3.9/20130208084835/
although it must be noted that I am unable to test these patches on
AM33xx due to an unknown problem with v3.8-rc kernels:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg83525.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=mRME
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/am33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
am33xx updates via Paul Walmsley <paul@pwsan.com>:
Fixes and IP block support for the TI AM33xx family of SoCs. These
are prerequisites for power management and some PWM driver changes.
Basic test logs are available from:
http://www.pwsan.com/omap/testlogs/am33xx_fixes_a_3.9/20130208084835/
although it must be noted that I am unable to test these patches on
AM33xx due to an unknown problem with v3.8-rc kernels:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg83525.html
* tag 'omap-for-v3.9/am33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
ARM: OMAP2+: AM33XX: Update the hardreset API
ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
ARM: OMAP2+: AM33XX: CM: Get rid of unnecessary header inclusions
Also get rid of OMAP_32K_TIMER_HZ as that no longer is needed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=sdQB
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/omap
From Tony Lindgren:
am33xx specific updates for restart and revision detection.
Also get rid of OMAP_32K_TIMER_HZ as that no longer is needed.
* tag 'omap-for-v3.9/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2: AM33XX: id: Add support for AM335x PG2.0
ARM: OMAP2+: Get rid of custom OMAP_32K_TIMER_HZ
ARM: OMAP2+: AM33xx: Add SoC specific restart hook
- Some tweaking and updates on device tree sources
- Enable imx6q-cpufreq support for device tree boot
- IMX/MXC onewire driver device tree conversion. Onewire maintainer
Evgeniy Polyakov gives his ACK to bless it go via arm-soc tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRF74lAAoJEFBXWFqHsHzOuQoH/jCirlseuciOCqoB3PHRGmcE
9VzCLJ9qK8QWxF51iQKZASdAhALqTI7WYxx1YgvLXYLdbLHuu5JHTwn3DBIEZyry
AOnKjCtQFVlGGRs1UXS6SxV8rLq5IiKq9OwuVWIxsE6QsPFDTzCBiXfZRpsayg37
vvauoquYuciukvCq+3RX7fsTC3L/6uCzVxRMV0LhePF2kw4+3J9+LMkwIEWXxfaP
kFhlEQyl5+jT15xEZE1ieMbvNu0eL6Ugef0VbHqWWZIZJgM4kU4+iwDhjYbhwEpE
WNklJi2TQ7ZTxzwaVtxUgOOo7DS6Z4lxJv1tSUHFk9JP+qPH/XaI/WnT0nW1lUg=
=xgZE
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into late/dt
From Shawn Guo:
imx device tree changes for 3.9
- Some tweaking and updates on device tree sources
- Enable imx6q-cpufreq support for device tree boot
- IMX/MXC onewire driver device tree conversion. Onewire maintainer
Evgeniy Polyakov gives his ACK to bless it go via arm-soc tree.
* tag 'imx-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: (22 commits)
ARM: dts: add dtsi for imx6q and imx6dl
ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
ARM: dts: i.MX6: Add regulator delay support
ARM: dts: Add device tree entry for onewire master on i.MX53
ARM: i.MX53: Add clocks for i.mx53 onewire master.
W1: Add device tree support to MXC onewire master.
ARM: imx: enable imx6q-cpufreq support
ARM: dts: Add apf51 basic support
ARM i.MX6: change mxs usbphy clock usage
ARM: dts: imx6q: Remove silicon version from SDMA firmware
ARM i.MX53: dts: add oftree for MBa53 baseboard
ARM i.MX53: add dts for the TQ tqma53 module
ARM: dts: imx53: pinctrl update
ARM i.MX51 babbage: Add keypad support
ARM: dts: imx: Add imx51 KPP entry
ARM: dts: imx25-karo-tx25: Put status entry in the end
ARM: mx25pdk: Add device tree support
ARM: dts: imx: use nodes label in board dts
ARM: dts: add missing imx dtb targets
ARM: boot: dts: Add an entry for imx27-pdk.dtb
...
- enable VPU support in imx_v4_v5_defconfig to get compile coverage
- enable netfilter support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=wKfb
-----END PGP SIGNATURE-----
Merge tag 'arm-imx-defconfig' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards
ARM i.MX defconfig updates for v3.9
- enable VPU support in imx_v4_v5_defconfig to get compile coverage
- enable netfilter support
* tag 'arm-imx-defconfig' of git://git.pengutronix.de/git/imx/linux-2.6:
ARM: imx_v4_v5_defconfig: Add VPU support
ARM: imx: configs: enable netfilter support
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRENe8AAoJEAf03oE53VmQhSUH/2ayxjgCbnCKWYEi0P8MoAiL
KfX/FOLA+0cB1WnZqE6zmxUkCoTHArjOywHVN+zmjh6Qs8DN0UhWacy5WBqkhu2O
C5GagBobhxYOdnRHqFEDip0XfYA0As+Rp2dyzMs9PhWQ8wpSFgZgPpUIxp8HjXIR
mkom+piRz+QhcW3HoCp9MDwszARy//s2unEoxXMN8ECi32aV9hwcpDOW/v67vN9i
Vm4SpFH6AKOM62HlpcismwtLydNgpbN3PYmstaRbk+JKXS1idBU72YU4MSL898ru
sI7ztKM8NkXZmpKjWav6z7Hy/FUrvk0fSFEO1QkuSMCVlxMqTk+OH+Cla72kI+o=
=CSe9
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into next/fixes-non-critical
From Nicolas Ferre:
Correction of 9x5 and 9n12 USART nodes
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/DT: remove atmel,use-dma-* from 9x5 and 9n12 USART nodes
This is a branch of fixes that originally were scheduled for 3.8 but
due to the request from Linus to hold back on all but the most critical
of fixes, we're re-queueing them for 3.9 here.
* fixes-for-3.9:
ARM: dts: imx6: fix fec ptp clock slow 10 time
ARM: highbank: mask cluster id from cpu_logical_map
ARM: scu: mask cluster id from cpu_logical_map
ARM: scu: add empty scu_enable for !CONFIG_SMP
ARM: at91/at91sam9x5.dtsi: fix usart3 TXD
ARM: at91: at91sam9x5: fix usart3 pinctrl name
ARM: EXYNOS: Fix crash on soft reset on EXYNOS5440
ARM: dts: fix tick and alarm irq numbers for exynos5440
ARM: dts: fix compatible value for exynos pinctrl
ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440
ARM: S3C24XX: fix uninitialized variable warning
mfd/vexpress: vexpress_sysreg_setup must not be __init
ARM: ux500: Fix u9540 booting issues
arm: mvebu: i2c come back in defconfig
arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
Dove: activate GPIO interrupts in DT
ARM: ux500: add spin_unlock(&master_lock).
ARM: ux500: Disable Power Supply and Battery Management by default
Signed-off-by: Olof Johansson <olof@lixom.net>
Exynos boot is broken with commit 0529e315 (ARM: use common irqchip_init
for GIC init). This commit split the irqchip initialization into 2 calls
to of_irq_init. This does not work because of_irq_init requires interrupt
parents to be in the match list.
Rather than reverting exynos changes, make it do the proper thing by using
IRQCHIP_DECLARE. This requires moving the combiner code to drivers/irqchip.
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch corrects the pin function value of sd4_bus8
from 3 to 4. This is verified on origen board for testing
eMMC on dw_mci controller.
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add 'default' case to silence the below warning:
arch/arm/plat-samsung/include/plat/fimc-core.h:25:9:
warning: switch with no cases
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add 'default' case to silence the following warning:
arch/arm/plat-samsung/include/plat/sdhci.h:356:9: warning: switch with no cases
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Commit c1d1cd597f ("ARM: OMAP2+:
omap_device: remove obsolete pm_lats and early_device code") missed a
few omap_device_build() calls that aren't included as part of the default
OMAP2+ Kconfig, omap2plus_defconfig.
Ideally, all devices that are present on the SoC should be created by
default, and only the corresponding device driver should be configured
or deconfigured in Kconfig. This allows drivers to be built as
modules and loaded later, even if they weren't part of the original
kernel build. Unfortunately, we're not quite there yet.
Thanks to Tony Lindgren for reporting this, found during his
randconfig tests.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When trying to get rid of the cross-includes of <mach/id.h>
from different drivers, so we can localize ASIC/CPU detection
to the mach-ux500 folder, we run into the way the PRCMU
handles base addresses and firmware detection.
This patch updates the firmware version detection to pass
the required information as platform data instead of
relying on cpu_is_* macros.
Now the PRCMU base address, the secondary TCDM area, the
TCPM area and the IRQ are passed as resources instead of
being grabbed from <mach/*> files. Incidentally this also
removes part of the reliance on <mach/irqs.h>.
Further it updates the firmware version detection, since the
location of the firmware ID bytes in the designated memory
are is now passed from the platform data instead. There is
no reason not to include the nice split-off of a struct to
hold the firmware information and a separate function to
populate it.
The patch actually rids the need to use the external
db8500_prcmu_early_init call at all, but I'm keepin back
that removal as I don't want the patch to be too big.
Cc: arm@kernel.org
Cc: Michel Jaoen <michel.jaouen@stericsson.com>
Cc: Lee Jones <lee.jones@linaro.org>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Loic Pallardy <loic.pallardy@stericsson.com>
Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Let the VPU driver be built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Netfilter packet filtering framework is useful for so many
use cases that most people will build kernels with it enabled.
So, it would probably make sense to have it enabled by default.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From Dinh Nguyen, this is a series of patches introducing support for
socfpga hardware (Altera Cyclone5). It also includes a cleanup that
moves some of the ARMv7 cache maintenance functions to a common location,
since three other platforms aready implemented it separately.
* socfpga/hw:
arm: socfpga: Add SMP support for actual socfpga harware
arm: Add v7_invalidate_l1 to cache-v7.S
arm: socfpga: Add entries to enable make dtbs socfpga
arm: socfpga: Add new device tree source for actual socfpga HW
Trivial conflict in arch/arm/mach-tegra/headsmp.S.
Signed-off-by: Olof Johansson <olof@lixom.net>
Because the CPU1 start address is different for socfpga-vt and
socfpga-cyclone5, we add code to use the correct CPU1 start addr.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Pavel Machek <pavel@denx.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Olof Johansson <olof@lixom.net>
mach-socfpga is another platform that needs to use
v7_invalidate_l1 to bringup additional cores. There was a comment that
the ideal place for v7_invalidate_l1 should be in arm/mm/cache-v7.S
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Pavel Machek <pavel@denx.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Olof Johansson <olof@lixom.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Tested-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Pavel Machek <pavel@denx.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Up to this point, support for socfpga has only been on a virtual
platform. Now that actual hardware is available, we add the appropriate
device tree source files.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Tested-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Pavel Machek <pavel@denx.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
msm_smd_probe is a driver probe function and may get
called after the __init time, so it must not call
any __init function, as the link-time warning reports.
Take away the __init annotation on proc_comm_boot_wait
to fix this.
Without this patch, building msm_defconfig results in:
WARNING: vmlinux.o(.text+0xb048): Section mismatch in reference from the function msm_smd_probe() to the function .init.text:proc_comm_boot_wait()
The function msm_smd_probe() references
the function __init proc_comm_boot_wait().
This is often because msm_smd_probe lacks a __init
annotation or the annotation of proc_comm_boot_wait is wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <c_dwalke@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
It is now possible to select CONFIG_KVM_ARM_TIMER to enable the
KVM architected timer support.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Do the necessary save/restore dance for the timers in the world
switch code. In the process, allow the guest to read the physical
counter, which is useful for its own clock_event_device.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add some the architected timer related infrastructure, and support timer
interrupt injection, which can happen as a resultof three possible
events:
- The virtual timer interrupt has fired while we were still
executing the guest
- The timer interrupt hasn't fired, but it expired while we
were doing the world switch
- A hrtimer we programmed earlier has fired
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
It is now possible to select the VGIC configuration option.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the init code for the hypervisor, the virtual machine, and
the virtual CPUs.
An interrupt handler is also wired to allow the VGIC maintenance
interrupts, used to deal with level triggered interrupts and LR
underflows.
A CPU hotplug notifier is registered to disable/enable the interrupt
as requested.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Enable the VGIC control interface to be save-restored on world switch.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Plug the interrupt injection code. Interrupts can now be generated
from user space.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
An interrupt may have been disabled after being made pending on the
CPU interface (the classic case is a timer running while we're
rebooting the guest - the interrupt would kick as soon as the CPU
interface gets enabled, with deadly consequences).
The solution is to examine already active LRs, and check the
interrupt is still enabled. If not, just retire it.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add VGIC virtual CPU interface code, picking pending interrupts
from the distributor and stashing them in the VGIC control interface
list registers.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the GIC distributor emulation code. A number of the GIC features
are simply ignored as they are not required to boot a Linux guest.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
User space defines the model to emulate to a guest and should therefore
decide which addresses are used for both the virtual CPU interface
directly mapped in the guest physical address space and for the emulated
distributor interface, which is mapped in software by the in-kernel VGIC
support.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Wire the basic framework code for VGIC support and the initial in-kernel
MMIO support code for the VGIC, used for the distributor emulation.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When an interrupt occurs for the guest, it is sometimes necessary
to find out which vcpu was running at that point.
Keep track of which vcpu is being run in kvm_arch_vcpu_ioctl_run(),
and allow the data to be retrieved using either:
- kvm_arm_get_running_vcpu(): returns the vcpu running at this point
on the current CPU. Can only be used in a non-preemptible context.
- kvm_arm_get_running_vcpus(): returns the per-CPU variable holding
the running vcpus, usable for per-CPU interrupts.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On ARM some bits are specific to the model being emulated for the guest and
user space needs a way to tell the kernel about those bits. An example is mmio
device base addresses, where KVM must know the base address for a given device
to properly emulate mmio accesses within a certain address range or directly
map a device with virtualiation extensions into the guest address space.
We make this API ARM-specific as we haven't yet reached a consensus for a
generic API for all KVM architectures that will allow us to do something like
this.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Now that sys_timer has been removed, update the mach-virt machine
descriptor to use a direct pointer to its timer_init function.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
If we want load epoch_cyc and epoch_ns atomically,
we should update epoch_cyc_copy first of all.
This notify reader that updating is in progress.
If we update epoch_cyc first like as current implementation,
there is subtle error case.
Look at the below example.
<Initial Condition>
cyc = 9
ns = 900
cyc_copy = 9
== CASE 1 ==
<CPU A = reader> <CPU B = updater>
write cyc = 10
read cyc = 10
read ns = 900
write ns = 1000
write cyc_copy = 10
read cyc_copy = 10
output = (10, 900)
== CASE 2 ==
<CPU A = reader> <CPU B = updater>
read cyc = 9
write cyc = 10
write ns = 1000
read ns = 1000
read cyc_copy = 9
write cyc_copy = 10
output = (9, 1000)
If atomic read is ensured, output should be (9, 900) or (10, 1000).
But, output in example case are not.
So, change updating sequence in order to correct this problem.
Cc: <stable@vger.kernel.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From Will Deacon, this lays the foundation for a basic virtualzed machine type.
* 'for-arm-soc/virt/mach' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
ARM: mach-virt: add SMP support using PSCI
ARM: Dummy Virtual Machine platform support
Signed-off-by: Olof Johansson <olof@lixom.net>
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=jJVz
-----END PGP SIGNATURE-----
Merge tag 'omap-devel-b-for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.9/pm-wfi-take2
On OMAP2+ devices, standardize and clean up WFI entry and WFI blocking.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/wfi_devel_a_3.9/20130208085027/
Conflicts:
arch/arm/mach-omap2/pm24xx.c
From Will Deacon:
This set of changes moves the arch-timer driver out from arch/arm/ and
into drivers/clocksource and unifies the new driver with the arm64 copy.
* 'for-arm-soc/arch-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
ARM: arch_timers: switch to physical timers if HYP mode is available
Documentation: Add ARMv8 to arch_timer devicetree
arm64: move from arm_generic to arm_arch_timer
arm64: arm_generic: prevent reading stale time
arm: arch_timer: move core to drivers/clocksource
arm: arch_timer: add arch_counter_set_user_access
arm: arch_timer: divorce from local_timer api
arm: arch_timer: add isbs to register accessors
arm: arch_timer: factor out register accessors
arm: arch_timer: split cntfrq accessor
arm: arch_timer: standardise counter reading
arm: arch_timer: use u64/u32 for register data
arm: arch_timer: remove redundant available check
arm: arch_timer: balance device_node refcounting
Signed-off-by: Olof Johansson <olof@lixom.net>
* 'for-rmk/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
ARM: perf: simplify __hw_perf_event_init err handling
ARM: perf: remove unnecessary checks for idx < 0
ARM: perf: handle armpmu_register failing
ARM: perf: don't pretend to support counting of L1I writes
ARM: perf: remove redundant NULL check on cpu_pmu
ARM: Use implementor and part defines from cputype.h
ARM: Define CPU part numbers and implementors
Enable AESS data in hwmod in order to be able to probe
audio driver.
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Add AESS memory bank data in hwmod in order to provide memory address
information to the driver.
This version also changes the AESS main clock to use a
non-CLKCTRL-based functional clock. These are being removed from the
clock data, since they should be handled by the IP block integration
code. Without this change, the kernel crashes during boot. Thanks to
Tony Lindgren for reporting this during a test merge.
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
[paul@pwsan.com: updated to change the AESS main_clk]
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Enable the AESS auto-gating control bit during AESS hwmod setup. This
fixes the following boot warning on OMAP4:
omap_hwmod: aess: _wait_target_disable failed
Without this patch, the AESS IP block does not indicate to the PRCM
that it is idle after it is reset. This prevents some types of SoC
power management until something sets the auto-gating control bit.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
After setup/enable, some IP blocks need some additional setting to
indicate the PRCM that they are inactive until they are configured.
Some examples on OMAP4 include the AESS and FSUSB IP blocks.
To fix this cleanly, this patch adds another optional function
pointer, enable_preprogram, to the IP block's hwmod data. The function
that is pointed to is called by the hwmod code immediately after the
IP block is reset.
This version of the patch includes a patch description fix from Felipe.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Add dtsi for imx6q and imx6dl with non-common blocks moved into there.
Major differences between imx6dl and imx6q:
* Dual vs. Quad cores
* single vs. dual IPU
* 128 vs. 256 KB OCRAM
* imx6q: ECSPI5, OpenVG (GC355), SATA
* imx6dl: I2C4, PXP, EPDC, LCDIF
* iomuxc/pads definition
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
i.MX6 Quad and i.MX6 DualLite is similar enough to share one dtsi
file, so rename imx6q.dtsi to imx6qdl.dtsi preparing for the addition
of imx6dl support.
Another member of i.MX6 series i.MX6 SoloLite is different enough
from the other two, so it will stand as a separate dtsi. That's why
we rename to imx6qdl.dtsi not imx6.dtsi.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
For ANATOP LDOs, vddcpu, vddsoc and vddpu
have step time settings in the misc2 register, need
to add necessary step time info for these three LDOs,
then regulator driver can add necessary delay based on
these settings.
offset 0x170:
bit [24-25]: vddcpu
bit [26-27]: vddpu
bit [28-29]: vddsoc
field definition:
0'b00: 64 cycles of 24M clock;
0'b01: 128 cycles of 24M clock;
0'b02: 256 cycles of 24M clock;
0'b03: 512 cycles of 24M clock;
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Update operating-points per hardware document and add support for
1 GHz and 1.2 GHz frequencies.
400 MHz, 800 MHz and 1 GHz should be supported by all i.MX6Q chips,
while 1.2 GHz support needs to know from OTP fuse bit.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This mxs usbphy is only needs to be on after system boots
up, and software never needs to control it anymore.
Meanwhile, usbphy's parent needs to be notified if usb
is suspend or not. So we design below mxs usbphy usage:
- usbphy1_gate and usbphy2_gate:
Their parents are dummy clock, we only needs to enable
it after system boots up.
- usbphy1 and usbphy2
Usage reserved bit for this clock, in that case, the refcount
will be updated, but without hardware changing.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Remove silicon version from SDMA firmware.
This makes it consistent with other i.MX SoCs firmware names.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only
supported devices, i.e. it is not feature complete, because of missing drivers
in mainline linux.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The tqma53 is an embedded module that has some features on board (e.g. emmc),
but mostly just provides access to them on its interface.
Going along with the imx53.dtsi, the tqma53.dtsi specifies the existing
devices and their pinctrl for this module. All devices that are not on the
module are disabled by default and need to be enabled in a baseboard DT.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add pinctrl for cspi, csi.
Add new pingroups for can1 and uart3.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The keypad is on the accessory board of i.MX51 babbage
main board and is driven by Keypad Port(KPP) in SoC.
The keymap is the same to i.MX25 3stack platform as
the accessory board schematic tells that it is designed
in this way.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Just to keep consistency with other dts files, place 'status' entry as the last
one.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi. Thus, the board
dts files become easier to read and edit with the least indentation
levels.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add missing imx dtb targets, so that make dtbs can cover all imx dtbs.
It's pretty useful for testing dts changes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add an entry for imx27-pdk.dtb, so that it can be generated by default.
Also, add an entry into Documentation/devicetree/bindings/arm/fsl.txt.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
imx27-pdk is the name found on Freescale website, so use it instead of 3ds.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Any devices wishing to use the AB8500's GPIO IRQs were forced to
request virtual IRQs from the gpio-ab8500 driver. Now that
responsibility has been passed back to the AB8500 core driver,
devices can request real IRQ numbers instead. This patch removes
any traces of the old virtual IRQ conversion handlers, which will
force any drivers requesting IRQs to use real IRQS.
Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
AB8500 GPIO no longer handles its GPIO IRQs. Instead, the AB8500
core driver has taken back the responsibility. Prior to this
happening, the AB8500 GPIO driver provided a set of virtual IRQs
which were used as a pass-through. These virtual IRQs had a base
of MOP500_AB8500_VIR_GPIO_IRQ_BASE, which was passed though pdata.
We don't need to do this anymore, so we're pulling out the
property from the structure.
Cc: arm@kernel.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Compile fix for !SMP
-More cpu cluster id related fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRDSkpAAoJEMhvYp4jgsXiSWYH/jy92oAHpKoNBZQ0wzOVXoa7
Lo9vkPaTexXY1SLNohrTiGDxWwm7LNfi6Lag3OtzyzAblcUAqd6ISyx2Nh7xN3Uu
L+3Y7CIBw9CqCAsrjOunMmKcawo/aiscAlhqOoYsmKGcbopQHEomui+yfDIX6NY+
v59xDXp1IyJHqDc9M3t2VJijfeCHnREIddt33gUeEcSfL7nyuvGf2DXuarAGN5N7
bHd7NxqZS2TNGxTbxuNZIlYuVUgqcVV16LLNlTGrBb27iiPJuIg3uHa6GVVO4n0U
czd388xl5Rca8LeD7rAvWPiHX2rIfyEyvWZO4KvRBC9H6+VgGvlyKtnoUPyNhn8=
=mUYd
-----END PGP SIGNATURE-----
Merge tag 'highbank-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux into fixes
From Rob Herring:
highbank fixes for 3.8
-Compile fix for !SMP
-More cpu cluster id related fixes
* tag 'highbank-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux:
ARM: highbank: mask cluster id from cpu_logical_map
ARM: scu: mask cluster id from cpu_logical_map
ARM: scu: add empty scu_enable for !CONFIG_SMP
Looks like there are few more places that I missed that can cause
compiler warnings. After grepping for omap initcall, all files
needing soc.h should now have it.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
I needed this when compiling for pandaboard.
The reason this is needed is that we are now using
omap_initcalls to keep them multiplatform safe.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Mostly cfa100xx related device tree source updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJREKBFAAoJEFBXWFqHsHzOdVwH/2x2a0mJi9Y/mE0y5ZSn/Ktj
bYIOJt4wjq15/rYcSzCrZtJ+u4+JwP7C06z0oTtNeiIw2kHuAiUTVrTBdaf60k4f
2FauaoX9koedCsBP2JPVAq5ZVE8BdAbj4inuoNUFJeN/pkH8Q5+PWQZbgxAYeN58
X//DUXPq8L2tNWdEl/F+DIYwH/y9ck01tV2Fyy6AItjEShStOCglootmmtzXoyj0
/8bOmc2ppdePofAd+M/5B+JE5S18WbakrdfNp8qVwBlYzjsUvFgz9Vwkbn81jPzJ
5Hx/vDiZFktqMuI6726DJ/oqxP0w+GqYzw657LdIKqS3zCbLGb752iaM/vPgo0c=
=SM0I
-----END PGP SIGNATURE-----
Merge tag 'mxs-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo:
mxs device tree changes for 3.9
- Mostly cfa100xx related device tree source updates
* tag 'mxs-dt-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: dts: Add rotary encoder to the CFA-10049
ARM: mxs: dts: Add gpio-keys for the rotary to the CFA-10049
ARM: dts: mxs: Add the LCD to the 10049 board
ARM: dts: mxs: Add muxing options for the third PWM
ARM: dts: cfa10049: Change the SPI3 bus to spi-gpio
ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support
ARM: mxs: Enable touchscreen on m28evk
ARM: dts: cfa10049: Add PCA9555 GPIO expander to the device tree
- A couple of optimization on timer
- Some updates on mxs_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJREJ4lAAoJEFBXWFqHsHzO5bwIAJkZC1IZ+GEh3n9ogbl/JwfE
B0k7xsTrx7TgsXvdX1oxrivu75rxWfhwVgZdp9dO3zEnyeOjFRitnlyfaliKx1JM
8ZHHsVP/VxOTvw5HarirmFejyWr9x+xx1H2p9swDHT+kccUA6aazEykEx4HFAADg
9c7Z3QWVLugwo950ayMgWk6QeRJb6pZj02OlszMiW4t/qphDhoF4qiqR9QiVL1aP
Td655hZzuoCuHrjyrRxUTgTwp70ntzxvwEDCaEqwGhmzN7tqJbi/wXTCcTg8A11A
2u3P8UvqeYKbATeqMP8vl/Ne6E1kAy8sGVTsAFoaooUUtZoN2YMdsIIXiw+JKy4=
=Veye
-----END PGP SIGNATURE-----
Merge tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
mxs soc changes for 3.9
- A couple of optimization on timer
- Some updates on mxs_defconfig
* tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
ARM: mxs: use apbx bus clock to drive the timers on timrotv2
ARM: mxs: Update mxs_defconfig
The Kconfig options selected by ARCH_TEGRA_*_SOC were recently sorted.
Update the newly added ARCH_TEGRA_114_SOC's select statements to match.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
CONFIG_ARCH_TEGRA_114_SOC doesn't currently enable gpiolib, which causes
numerous build problems building a Tegra kernel with only Tegra114
enabled, and not Tegra20 or Tegra30. Enable ARCH_REQUIRE_GPIOLIB to
solve this. However, all Tegra will use gpiolib, so select this option
from ARCH_TEGRA rather than each individual ARCH_TEGRA_*_SOC, to
prevent this problem for any future chips.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch fixes the build error when ARCH_TEGRA_114_SOC is enabled
and ARCH_TEGRA_3x_SOC is disabled.
This provides Tegra114 with its own tegra114_init_early() instead of
making use of tegra30_init_early() so that T114 build doesn't depend
on T3x anymore.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request adds support for I2C0 and watchdog timer
for DA850 EVM booting using device tree. It also enables
machine reboot when using device tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=d1si
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.9/dt-2' of git://gitorious.org/linux-davinci/linux-davinci into next/dt
From Sekhar Nori:
Second round of DT updates for DaVinci.
This pull request adds support for I2C0 and watchdog timer
for DA850 EVM booting using device tree. It also enables
machine reboot when using device tree.
* tag 'davinci-for-v3.9/dt-2' of git://gitorious.org/linux-davinci/linux-davinci:
ARM: davinci: da850 DT: add support for machine reboot
ARM: davinci: da850: add wdt DT node
ARM: davinci: da850: add DT node for I2C0
- adding the watchdog to Animeo IP board
- some more DT support for at91rm9200 peripherals
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRE8zDAAoJEAf03oE53VmQOXIH/0btL+h2tiV6lY4he090YLTL
SNBbs1m05SvtfMfei1P9sFKokc5IEbf36izd1E30hcLw1bcsUulS9CChyXu4KEc2
Xd6LLIOyH4jLl2/s0rZz1lhxCoFIv9bFp0xaZgtuasUxxlsV5Kg9iee4jYIeHL4G
cX+z8qLgTpL77Ep6HBzc2K1ALXqW/0sjo+5eHwUJDHiM/+awPD3lJMnJjDKLdY8j
0BoODOuHFGTo3fdIeEprJhPTiqZMEFDfOPsLYA2ksPqZEw5LV+ITAnHiw8V5LbBI
XNP8gYTUWLv3LJqnKc9qt/6KjHUsztbtcjsSdOGmZp5IbFQw9AJGg/mBBTpEvJM=
=6yzB
-----END PGP SIGNATURE-----
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
From Nicolas Ferre:
Update to DT files for AT91:
- adding the watchdog to Animeo IP board
- some more DT support for at91rm9200 peripherals
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91: add EMAC bindings to RM9200 DT
ARM: at91: add SSC bindings to RM9200 DT
ARM: at91: add MMC bindings to RM9200 DT
ARM: at91: Animeo IP: enable watchdog support
Signed-off-by: Olof Johansson <olof@lixom.net>
Update for audio support via omap-twl4030 and pwm updates in board level,
and zoom-peripherals update to not request the TWL GPIO7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=pDtV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/twl-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
From Tony Lidgren:
OMAP TWL updates from Peter Ujfalusi <peter.ujfalusi@ti.com>:
Update for audio support via omap-twl4030 and pwm updates in board level,
and zoom-peripherals update to not request the TWL GPIO7.
* tag 'omap-for-v3.9/twl-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030
ARM: OMAP: omap3beagle: Use the pwm_leds driver to control the PMU_STAT led
ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight
ARM: OMAP: sdp3430: Audio support via the common omap-twl4030 machine driver
ARM: OMAP: zoom: Audio support via the common omap-twl4030 machine driver
ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
ARM: OMAP2+: twl-common: Add default twl4030 audio configuration
ARM: OMAP: zoom: Zoom2 does not have extmute functionality
ARM: OMAP: 3430sdp: Enable extmute functionality for audio
Register ARM architected timer.
This is preparatory work by Magnus Damm for SoC(s) that use
the ARM architected timer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Wq1K
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc4-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Fourth round of Renesas ARM-based SoC changes for v3.9
Register ARM architected timer.
This is preparatory work by Magnus Damm for SoC(s) that use
the ARM architected timer.
* tag 'renesas-soc4-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Register ARM architected timer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRFRkcAAoJEAf03oE53VmQ71EH/08SOBM+kgQjKCzFe9ekuytz
DlnUzFWOQlSibjWOL7ruWoLPiTurJHQNiKEpePw7g3dh8ars7fJLlVIr0yRehHBs
pJpxzH7/ZqHqzi+4YXCrn5XAVK9ej7HKFo9zoDD1GMctsOD2FoNDIzOIh47s3z4Y
G92kvGFG5z8EACvcob/+q53RcVjimugcrKRhz61MhKdpiIGGzz/+wl45StyM8RYc
mLFb7yGa1j9Zdstm/45a+3XwMUEbxsbi0NGeA9E9kL3XZZERWkfcDL4MiV3F0l6Q
oJqVQ6/QzGyqnTolr+2FAVkaXDP4geo6S42N97pGIjtIco2gaQ5kbMPoyei98N0=
=SVnr
-----END PGP SIGNATURE-----
Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup
From Nicolas Ferre:
Little AT91 cleanup: only remove one deprecated board.
* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
ARM: at91: remove NEOCORE 926 board
Signed-off-by: Olof Johansson <olof@lixom.net>
Modify/remove conflict in arch/arm/mach-at91/board-neocore926.c
When running on Integrator/AP using atags, ap_syscon_base is initialised
in ->map_io, which isn't called for !MMU platforms.
Instead, initialise the pointer in ->machine_init, as we do when booting
with device-tree.
Cc: stable@vger.kernel.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the da8xx_restart() function to support machine reboot
when booting using DT. Have the function search for the watchdog
platform device instead of always using "da8xx_wdt_device" which
is never registered in DT case.
While at it, also make da8xx_wdt_device static since there is no need
for it to be globally visible.
Tested machine reboot with both DT and non-DT boot on DA850 EVM.
Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add I2C0 device tree and pin muxing information to da850-evm.
Also, add OF_DEV_AUXDATA for I2C0 controller driver in da850
board dt file to use I2C0 clock.
Verified i2c0 node gets created in sys class interface as
"/sys/class/i2c-dev/i2c-0/subsystem/i2c-0".
nsekhar@ti.com: tested using i2cdetect and i2cdump.
Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The device->state_count is initialized in the cpuidle_register_device
function.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
With one function handling the idle state and a single variable,
the usage of the davinci_ops is overkill.
This patch removes these ops and simplify the code.
Furthermore, the 'driver_data' field is no longer used, we have
1 of the 3 remaining user of this field removed.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The patch is mindless, it just moves the idle function below in the file
in order to prevent forward declaration in the next patch.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
That will allow to cleanup the rest of the code right after,
because the ops won't make sense.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Enabling UART FIFO in bootloader caused the kernel infinite
loop on S5PV210 due to uninitialized fifo_max and fifo_mask global
variables. This patch adds the correct initialization.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Symbol S3C_DEV_USB_HOST should be defined to avoid this problem.
LINK vmlinux
LD vmlinux.o
MODPOST vmlinux.o
WARNING: modpost: Found 2 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
LD init/built-in.o
arch/arm/mach-s3c24xx/built-in.o:(.init.data+0x660): undefined reference to `s3c_device_ohci'
make: *** [vmlinux] Error 1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Pull ARM fixes from Russell King:
"I was going to hold these off until v3.8 was out, and send them with a
stable tag, but as everyone else is pushing much bigger fixes which
Linus is accepting, let's save people from the hastle of having to
patch v3.8 back into working or use a stable kernel.
Looking at the diffstat, this really is high value for its size; this
is miniscule compared to how the -rc6 to tip diffstat currently looks.
So, four patches in this set:
- Punit Agrawal reports that the kernel no longer boots on MPCore due
to a new assumption made in the GIC code which isn't true of
earlier GIC designs. This is the biggest change in this set.
- Punit's boot log also revealed a bunch of WARN_ON() dumps caused by
the DT-ification of the GIC support without fixing up non-DT
Realview - which now sees a greater number of interrupts than it
did before.
- A fix for the DMA coherent code from Marek which uses the wrong
check for atomic allocations; this can result in spinlock lockups
or other nasty effects.
- A fix from Will, which will affect all Android based platforms if
not applied (which use the 2G:2G VM split) - this causes
particularly 'make' to misbehave unless this bug is fixed."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
ARM: DMA mapping: fix bad atomic test
ARM: realview: ensure that we have sufficient IRQs available
ARM: GIC: fix GIC cpumask initialization
The missing include led to a implcit declaration warning:
In file included from arch/arm/mach-s3c24xx/mach-osiris.c:34:0:
include/linux/platform_data/i2c-s3c2410.h:37:26: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:37:26: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:66:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:67:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:68:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:69:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:70:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:71:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:72:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
include/linux/platform_data/i2c-s3c2410.h:73:38: warning: 'struct platform_device' declared inside parameter list [enabled by default]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The code to enter sleep is used by both the s3c2412 and s3c2416 and
was thus factored out into an extra config option.
But it seems it was forgotten to add the appropriate select to the
s3c2412 pm option, resulting in breakage when only compiling s3c2412
support.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
dpll_usb needs the clkdm association so the clkdm can be
turned on before a relock. All other dplls for omap4 belong
to the ALWON (always on) domain.
The association was present as part of the older data file
(clock44xx_data.c) but looks like got accidently dropped with
the common clk convertion.
More details of the patch which fixed this up in the older
data file can be dound here..
http://www.spinics.net/lists/linux-omap/msg63076.html
Adding the .clkdm_name as part of the clk_hw_omap struct also
means a new .init needs to be part of the clk_ops for dpll_usb
to initialise the clkdm.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Commit 1416408d {ARM: OMAP2+: PM: share some suspend-related functions
across OMAP2, 3, 4} moved suspend code to common place but now with
that change, for DT build on OMAP4, suspend hooks are not getting
registered which results in no suspend support.
The DT return condition is limited to PMIC and smartreflex
initialization and hence restrict it so that suspend ops gets
registered.
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The board is not available anymore and it seems its use
is very limited.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
am33xx_cm_wait_module_ready() checks if register offset is NULL.
int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
{
int i = 0;
if (!clkctrl_offs)
return 0;
In case of AM33xx, CLKCTRL register offset for different clock domains
are not uniformly placed. An example of this would be the RTC clock
domain with CLKCTRL offset at 0x00.
In such cases the module ready check is skipped which leads to a data
abort during boot-up when RTC registers is accessed.
Remove this check here to avoid checking module readiness for modules
with clkctrl register offset at 0x00.
Koen Kooi notes that this patch fixes a crash on boot with
CONFIG_RTC_DRV_OMAP=y with v3.8-rc5.
Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
[paul@pwsan.com: noted Koen's test in the patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
struct omap_hwmod records belonging to wkup m3 domain is missing
HWMOD_NO_IDLEST flags; add them.
This patch is a prerequisite for a subsequent patch, 'ARM: OMAP2:
am33xx-hwmod: Fix "register offset NULL check" bug'. That patch would
otherwise attempt to read from reserved bits.
Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
[paul@pwsan.com: add some more explanation in the patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
As part of PWM subsystem integration, PWM subsystem are sharing
resources like clock across submodules (ECAP, EQEP & EHRPWM). To handle
resource sharing & IP integration rework on parent child relation
between PWMSS and ECAP, EQEP & EHRPWM child devices to support runtime PM.
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
EQEP IP block integration data is not present in HWMOD data. Also
address ranges specified for EACP & EHRPWM are not correct & HWMOD
flags of ADDR_TYPE_RT are added to PWM subsystem register address
space. This patch:
1. Corrects register address mapping for ECAP & EHRPWM
2. Removes HWMOD flags in PWM submodule register address space.
3. Adds EQEP HWMOD entries.
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
[paul@pwsan.com: tweaked patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Since AM33XX supports only DT-boot, this is needed
for the appropriate device nodes to be created.
Note: OCMC RAM is part of the PER power domain and supports
retention. The assembly code for low power entry/exit will
run from OCMC RAM. To ensure that the OMAP PM code does not
attempt to disable the clock to OCMC RAM as part of the
suspend process add the no_idle_on_suspend flag.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
WKUP-M3 has a reset status bit (RM_WKUP_STST.WKUP_M3_LRST)
Update the hardreset API to ensure that the reset line properly
deasserted.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
WKUP-M3 has a reset status bit (RM_WKUP_STST.WKUP_M3_LRST)
Update the WKUP-M3 hwmod data to reflect the same.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
The current HWMOD code expects the memory region with
the IP's SYSCONFIG register to be marked with ADDR_TYPE_RT
flag.
CPGMAC0 hwmod entry specifies two memory regions and marks
both with the flag ADDR_TYPE_RT although only the 2nd region
has the SYSCONFIG register. This leads to the HWMOD code
accessing the wrong memory address for idle and standby
operations. Fix this by removing the ADDR_TYPE_RT flag from
the 1st memory region in CPGMAC0 hwmod entry.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Third Party Transfer Controller (TPTC0) needs to be idled and
put to standby under SW control. Add the appropriate flags in
the TPTC0 hwmod entry.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
OCMC RAM lies in the PER power domain and this memory
support retention.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
This is necessary to ensure that macros declared here can
be reused from assembly files.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
cm33xx.h unnecessarily includes a lot of header files.
Get rid of these and directly include "iomap.h" which
is needed to keep things compiling.
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
We have received multiple reports of mmap failures when running with a
2:2 vm split. These manifest as either -EINVAL with a non page-aligned
address (ending 0xaaa) or a SEGV, depending on the application. The
issue is commonly observed in children of make, which appears to use
bottom-up mmap (assumedly because it changes the stack rlimit).
Further investigation reveals that this regression was triggered by
394ef6403a ("mm: use vm_unmapped_area() on arm architecture"), whereby
TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing
get_unmapped_area to choke on misaligned addressed.
This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of
TASK_SIZE and explicitly aligns the result to 16M, matching the other
end of the heap.
Acked-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Steve Capper <steve.capper@arm.com>
Reported-by: Jean-Francois Moine <moinejf@free.fr>
Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98)
[<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198)
[<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c)
[<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454)
[<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44)
[<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8)
[<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120)
[<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c)
[<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c)
[<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4)
[<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240)
[<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac)
[<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150)
[<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78)
[<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c)
This happens because the DMA allocation code is not respecting atomic
allocations correctly.
GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested. GFP_ATOMIC is not a flag but
a value. The GFP bitmask flags are all prefixed with __GFP_.
The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation. We need to do the same.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Realview EB with a rev B MPcore tile results in lots of warnings at
boot because it can't allocate enough IRQs. Fix this by increasing
the number of available IRQs.
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec()
Cannot allocate irq_descs @ IRQ96, assuming pre-allocated
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40)
[<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140)
[<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1d ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1e ]---
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Punit Agrawal reports:
> I was trying to boot 3.8-rc5 on Realview EB 11MPCore using
> realview-smp_defconfig as a starting point but the kernel failed to
> progress past the log below (config attached).
>
> Pawel suggested I try reverting 384a290283 - "ARM: gic: use a private
> mapping for CPU target interfaces" that you've authored. With this
> commit reverted the kernel boots.
>
> I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd)
> might be able to shed light on that.
Some early GIC implementations return zero for the first distributor
CPU routing register. This means we can't rely on that telling us
which CPU interface we're connected to. We know that these platforms
implement PPIs for IRQs 29-31 - but we shouldn't assume that these
will always be populated.
So, instead, scan for a non-zero CPU routing register in the first
32 IRQs and use that as our CPU mask.
Reported-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The platform data is used not only by wlcore-based drivers, but also
by wl1251. Move it up in the directory hierarchy to reflect this.
Additionally, make it truly optional. At the moment, disabling
platform data while wl1251_sdio or wlcore_sdio are enabled doesn't
work, but it will be necessary when device tree support is
implemented.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
The LP55xx common driver provides a new header, leds-lp55xx.h.
This driver enables removing duplicate code for both drivers and
making coherent driver structure.
LP5521 and LP5523/55231 platform data were merged into one common file.
Therefore, the LP5521/5523 platform code need to be fixed.
This patch has been already acked.
For ux500: https://lkml.org/lkml/2012/10/11/417
Acked-by: Linus Walleij <linus.walleij@linaro.org>
For omap: https://lkml.org/lkml/2012/10/11/334
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
OMAP4 CHIP level PM works only with newer bootloaders. The
dependency on the bootloader comes from the fact that the
kernel is missing reset and initialization code for some
devices.
While the right thing to do is to add reset and init code in
the kernel, for some co-processor IP blocks like DSP and IVA
it means downloading firmware into each one of them to execute
idle instructions.
While a feasible solution is worked upon on how such IP blocks
can be better handled in the kernel, in the interim, to avoid
any further frustration to users testing PM on OMAP4 and finding
it broken, warn them about the bootloader being a possible
cause.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: R Sricharan <r.sricharan@ti.com>
[paul@pwsan.com: tweaked warning messages and comments slightly]
Acked-by: Kevin Hilman <khilman@linaro.org>
[paul@pwsan.com: fixed checkpatch warning]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
According to Mark Greer, on OMAP AM3517/3505 chips, the EMAC is unable
to wake the ARM up from WFI:
http://www.spinics.net/lists/arm-kernel/msg174734.html
Further troubleshooting was unable to narrow the problem down. So we
don't have much choice other than to block WFI when the EMAC is active
with the HWMOD_BLOCK_WFI flag.
Based on Mark's original patch. We're removing the omap_device-based
pm_lats code, so a different approach was needed.
This third version contains some corrections thanks to Mark's review.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Use the HWMOD_BLOCK_WFI flag in the hwmod data to prevent the MPU from
entering WFI when the I2C devices are active. No idea why this is needed;
this could certainly bear further investigation if anyone is interested.
The objective here is to remove some custom code from the OMAP24xx PM
code.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Apparently, on some OMAPs, the MPU can't be allowed to enter WFI while
certain peripherals are active. It's not clear why, and it's likely
that there is simply some other bug in the driver or integration code.
But since the likelihood that anyone will have the time to track these
problems down in the future seems quite small, we'll provide a
flag, HWMOD_BLOCK_WFI, to mark these issues in the hwmod data.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
There shouldn't be any need to jump to SRAM code if the OMAP CORE
clockdomain (and consequently the SDRAM controller and CORE PLL) stays
active during MPU WFI. The SRAM code should only be needed when the RAM
enters self-refresh. So in the case where CORE stays active, just call
WFI directly from the mach-omap2/pm24xx.c code. This removes some
unnecessary SRAM code.
This second version replaces the inline WFI with the corresponding
coprocessor register call, using tlbflush.h as an example. This is
because the assembler doesn't recognize WFI as a valid ARMv6
instruction.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A seperate driver has been added to handle the usb part of control
module. A device for the above driver is created here, using the register
address information to be used by the driver for powering on the PHY and
for writing to the mailbox.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have a separate driver for the control module,
stop populating the control module device data in other modules
(PHY and OTG) device info.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds an IPMMU device and notifies the IPMMU driver which
devices are connected via the IPMMU module. All devices connected to the main
memory bus via the IPMMU module MUST be registered when SHMOBILE_IPMMU and
SHMOBILE_IOMMU are enabled because physical address cannot be used
while the IPMMU module's MMU function is enabled.
Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch adds an IPMMU device and notifies the IPMMU driver which
devices are connected via the IPMMU module. All devices connected to the main
memory bus via the IPMMU module MUST be registered when SHMOBILE_IPMMU and
SHMOBILE_IOMMU are enabled because physical address cannot be used
while the IPMMU module's MMU function is enabled.
Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch adds an IPMMU device and notifies the IPMMU driver which
devices are connected via the IPMMU module. All devices connected to the main
memory bus via the IPMMU module MUST be registered when SHMOBILE_IPMMU and
SHMOBILE_IOMMU are enabled because physical address cannot be used
while the IPMMU module's MMU function is enabled.
Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The PCI IRQs were regressing due to two things:
- The PCI glue layer was using an hard-coded IRQ 27 offset.
This caused the immediate regression.
- The SIC IRQ mask was inverted (i.e. a bit was indeed set to
one for each valid IRQ on the SIC, but accidentally inverted
in the init call). This has been around forever, but we have
been saved by some other forgiving code that would reserve
IRQ descriptors in this range, as the versatile is
non-sparse.
When the IRQs were bumped up 32 steps so as to avoid using IRQ
zero and avoid touching the 16 legacy IRQs, things broke.
Introduce an explicit valid mask for the IRQs that are active
on the PIC/SIC, and pass that. Use the BIT() macro from
<linux/bitops.h> to make sure we hit the right bits, readily
defined in <mach/platform.h>.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 91c2ebb90b (ARM: 7114/1: cache-l2x0: add resume entry for l2
in secure mode) added resume entry for l2 in secure mode, but it missed
the dummy entry when CONFIG_CACHE_L2X0 is not set.
(Commit text edited by rmk.)
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From Kukjin Kim:
This is 4th cleanup for Samsung S3C24XX stuff, and removes plat-s3c24xx
directory.
* 'next/cleanup-s3c24xx-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: header mach/regs-mem.h local
ARM: S3C24XX: header mach/regs-power.h local
ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
From Kukjin Kim:
This is redoing the s3c24xx irqs in a generic way by using a declarative
approach.
* 'next/irq-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: transform s3c2443 subirqs into new structure
ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
ARM: S3C24XX: move s3c2443 irq code to irq.c
ARM: S3C24XX: transform s3c2416 irqs into new structure
ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
ARM: S3C24XX: move s3c2416 irq init to common irq code
ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
ARM: S3C24XX: Move irq syscore-ops to irq-pm
ARM: S3C24XX: transform irq handling into a declarative form
Signed-off-by: Olof Johansson <olof@lixom.net>
- Sort out imx DEBUG_LL uart port selection
- A couple of imx_v6_v7_defconfig updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJREHAwAAoJEFBXWFqHsHzOONMIAK/w88b7mCNmwOgV+nEDZGfm
17rVGXZV4YdR4bpOFBdbMMddf16Yb5ENH5AHDwlYzr8zzZE0ODOjrQ5Pmk1aA9VR
EsJVIKpS9FnU6tvUIEnYPTK+PDkf44IW/bDb9BdbptVQmnWP/hTtYDcx7ruTSZx4
OK/Z9oz3Hwwl8+AfWh67tZ/nqJg7eugGwctM6IxMOH7dUCuJ5DALF9dYn3NCqC6b
oqkzbNpSdg2MicUINiMOEbQvoZfGgpC6CH/nWCSIjNWss0bbakpF5iqk0aU7+/0k
tNtbKFIAKgcHF4t0P0RyI6Qyt03tPBF2tUobuCEtwdBDT3jWFrkpUpImFLyE5+I=
=0R2N
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
imx soc changes for 3.9
- Sort out imx DEBUG_LL uart port selection
- A couple of imx_v6_v7_defconfig updates
* tag 'imx-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs
ARM: imx: use separated debug uart symbol for imx31 and imx35
ARM: imx_v6_v7_defconfig: Select IPUV3 driver
Commit 816a65ef4 (ARM: OMAP2+: Limit omap initcalls to omap only on
multiplatform kernels) fixed up things for multiplatform booting
but failed to include soc.h causing a new warning:
arch/arm/mach-omap2/hwspinlock.c:60:1: warning: data definition has no type or storage class
arch/arm/mach-omap2/hwspinlock.c:60:1: warning: type defaults to 'int' in declaration of 'omap_postcore_initcall'
arch/arm/mach-omap2/hwspinlock.c:60:1: warning: parameter names (without types) in function declaration
arch/arm/mach-omap2/hwspinlock.c:31:122: warning: 'hwspinlocks_init' defined but not used
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
things to device tree based booting.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=mdSV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
From Tony Lindgren:
Minimal updates to OMAP board-*.c files while converting
things to device tree based booting.
* tag 'omap-for-v3.9/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
RX-51: Register twl4030-madc device
RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
ARM: OMAP1: nokia770: enable CBUS/Retu
ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
ARM: OMAP2+: craneboard: support the TPS65910 PMU
ARM: OMAP2+: craneboard: support NAND device
ARM: OMAP3: cm-t3517: add MMC support
ARM: OMAP2+: Remove apollon board support
+ Linux 3.8-rc6
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove some dead OMAP clock and device integration code and data.
Also, clean up the way that the OMAP device integration code blocks
WFI/WFE to use a consistent mechanism, controlled by a data flag.
Several OMAP2+ power management fixes, optimizations, and cleanup.
This series is a prerequisite for the functional powerdomain
conversion series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Rhql
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
From Tony Lindgren:
OMAP PM related updates via Paul Walmsley <paul@pwsan.com>:
Remove some dead OMAP clock and device integration code and data.
Also, clean up the way that the OMAP device integration code blocks
WFI/WFE to use a consistent mechanism, controlled by a data flag.
Several OMAP2+ power management fixes, optimizations, and cleanup.
This series is a prerequisite for the functional powerdomain
conversion series.
* tag 'omap-for-v3.9/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions
ARM: OMAP2xxx: CM: remove autodep handling
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock
ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code
ARM: OMAP2: PM/powerdomain: drop unnecessary pwrdm_wait_transition()
ARM: OMAP2xxx: PM: clean up some crufty powerstate programming code
ARM: OMAP2+: clockdomain: add pwrdm_state_switch() call to clkdm_sleep()
ARM: OMAP2+: powerdomain: fix powerdomain trace integration
ARM: OMAP4: MPUSS PM: remove unnecessary shim functions for powerdomain control
ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle()
ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active
ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
ARM: OMAP3xxx: CPUIdle: simplify the PER next-state code
ARM: OMAP2xxx: powerdomain: core powerdomain missing logic retention states
ARM: OMAP2xxx: clock data: clean up unused null clocks
ARM: OMAP4: clock/hwmod data: remove MODULEMODE entries in mux + gate combos
ARM: OMAP4: clock/hwmod data: start to remove some IP block control "clocks"
ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code
the -rc series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=IZZq
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9/fixes-non-critical-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
From Tony Lindgren:
Few fixes for v3.9 merge window that are not urgent for
the -rc series.
* tag 'omap-for-v3.9/fixes-non-critical-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: using strlcpy instead of strncpy
ARM: OMAP2+: Fix selection of clockevent timer when using device-tree
ARM: OMAP: Fix the use of uninitialized dma_lch_count
ARM: OMAP: make wakeupgen_lock raw
+ Linux 3.8-rc6
Joonsoo Kim