Intel Platform Monitoring Technology (PMT) support is indicated by presence
of an Intel defined PCIe Designated Vendor Specific Extended Capabilities
(DVSEC) structure with a PMT specific ID. The current MFD implementation
creates child devices for each PMT feature, currently telemetry, watcher,
and crashlog. However DVSEC structures may also be used by Intel to
indicate support for other features. The Out Of Band Management Services
Module (OOBMSM) uses DVSEC to enumerate several features, including PMT.
In order to support them it is necessary to modify the intel_pmt driver to
handle the creation of the child devices more generically. To that end,
modify the driver to create child devices for any VSEC/DVSEC features on
supported devices (indicated by PCI ID). Additionally, move the
implementation from MFD to the Auxiliary bus. VSEC/DVSEC features are
really multifunctional PCI devices, not platform devices as MFD was
designed for. Auxiliary bus gives more flexibility by allowing the
definition of custom structures that can be shared between associated
auxiliary devices and the parent device. Also, rename the driver from
intel_pmt to intel_vsec to better reflect the purpose.
This series also removes the current runtime pm support which was not
complete to begin with. None of the current devices require runtime pm.
However the support will be replaced when a device is added that requires
it.
Reviewed-by: Mark Gross <markgross@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20211208015015.891275-4-david.e.box@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
by command 'nmcli r wwan' or 'rfkill list'.
Issue analysis as below:
When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
In patch V2, Hans said 'sw_state should be unchanged
after a suspend/resume. It's better to drop the
tpacpi_rfk_update_swstate call all together from the
resume path'.
And it's confimed by Lenovo that GWAN is no longer
available from WHL generation because the design does not
match with current pin control.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A Lenovo ThinkStation S20 (4157CTO BIOS 60KT41AUS) fails to boot on
recent kernels including the think-lmi driver, due to the fact that
errors returned by the tlmi_analyze() function are ignored by
tlmi_probe(), where tlmi_sysfs_init() is called unconditionally.
This results in making use of an array of already freed, non-null
pointers and other uninitialized globals, causing all sorts of nasty
kobject and memory faults.
Make use of the analyze function return value, free a couple leaked
allocations, and remove the settings_count field, which is incremented
but never consumed.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Mark Gross <markgross@kernel.org>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/163639463588.1330483.15850167112490200219.stgit@omen
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
dell-wmi-descriptor only provides symbols to other drivers.
These drivers already select dell-wmi-descriptor when needed.
This fixes an issue where dell-wmi-descriptor is compiled as a module
with localyesconfig on a non-Dell machine.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20211113080551.61860-1-linux@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If 'led_classdev_register()' fails, some additional resources should be
released.
Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.
Fixes: a4c724d072 ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c797821 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since the "Add special handling for timer based S0i3 wakeup" changes
the amd-pmc code now relies on symbols from the RTC-class code,
add a dependency for this to Kconfig.
Fixes: 59348401eb ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211102153256.76956-1-hdegoede@redhat.com
This code should be using PTR_ERR() instead of IS_ERR(). And because
it's using the wrong "dev->client" pointer, the IS_ERR() check will be
false, meaning the function returns success.
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20211110074346.GB5176@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
cros_ec_typec:
* Clean up use of cros_ec_check_features
cros_ec_*:
* Rename and move cros_ec_pd_command to cros_ec_command, and make changes to
cros_ec_typec and cros_ec_proto to use the new common command, reducing
duplication.
sensorhub:
* simplify getting .driver_data in cros_ec_sensors_core and cros_ec_sensorhub
misc:
* Maintainership change. Enric Balletbo i Serra has moved on from Collabora,
so removing him from chrome/platform maintainers. Thanks for all of your
hard work maintaining this, Enric, and best of luck to you in your new role!
* Add Prashant Malani as driver maintainer for cros_ec_typec.c and
cros_usbpd_notify. He was already principal contributor of these drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYYrwxQAKCRBzbaomhzOw
wuTkAQCsc0psJQ+K6JVlBk16fX1kuucS1J7QiqtUaT4ZGCHrbQEApK2X+R9pXmmC
I6RfApB0Z2AMUg2uEB4OSNLaoiZ5pQM=
=SBds
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Clean up use of cros_ec_check_features
cros_ec_*:
- Rename and move cros_ec_pd_command to cros_ec_command, and make
changes to cros_ec_typec and cros_ec_proto to use the new common
command, reducing duplication.
sensorhub:
- simplify getting .driver_data in cros_ec_sensors_core and
cros_ec_sensorhub
misc:
- Maintainership change. Enric Balletbo i Serra has moved on from
Collabora, so removing him from chrome/platform maintainers. Thanks
for all of your hard work maintaining this, Enric, and best of luck
to you in your new role!
- Add Prashant Malani as driver maintainer for cros_ec_typec.c and
cros_usbpd_notify. He was already principal contributor of these
drivers"
* tag 'tag-chrome-platform-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_proto: Use ec_command for check_features
platform/chrome: cros_ec_proto: Use EC struct for features
MAINTAINERS: Chrome: Drop Enric Balletbo i Serra
platform/chrome: cros_ec_typec: Use cros_ec_command()
platform/chrome: cros_ec_proto: Add version for ec_command
platform/chrome: cros_ec_proto: Make data pointers void
platform/chrome: cros_usbpd_notify: Move ec_command()
platform/chrome: cros_usbpd_notify: Rename cros_ec_pd_command()
platform/chrome: cros_ec: Fix spelling mistake "responsed" -> "response"
platform/chrome: cros_ec_sensorhub: simplify getting .driver_data
iio: common: cros_ec_sensors: simplify getting .driver_data
platform/chrome: cros-ec-typec: Cleanup use of check_features
platform/chrome: cros_ec_proto: Fix check_features ret val
MAINTAINERS: Add Prashant's maintainership of cros_ec drivers
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPaPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3wCghhRCsLl5axOKdbkJO2ZUApR71DwAn2Vjwo2Y
Jgo6v3bVWWhL43YwCkf6
=UNgI
-----END PGP SIGNATURE-----
Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
Users on darp6 that do not have Open EC firmware have reported crashes
on boot. Correct the error handling for the input device to fix it.
Managed devices do not need to be explicitly unregistered or freed, as
this is handled by devres. Drop the call to input_free_device.
Fixes: 0de30fc684 ("platform/x86: system76_acpi: Replace Fn+F2 function for OLED models")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211030154213.2515-1-tcrawford@system76.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use the existing cros_ec_command() for cros_ec_check_features(). This
eliminates an unnecessary duplication of the memory allocation/free and
memory copy code.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20211004170716.86601-2-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
The Chrome EC's features are returned through an
ec_response_get_features struct, but they are stored in an independent
array. Although the two are effectively the same at present (2 unsigned
32 bit ints), there is the possibility that they could go out of sync.
Avoid this by only using the EC struct to store the features.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20211004170716.86601-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Add preliminary support for the Surface Pro 8 to the Surface Aggregator
registry. This includes battery/charger status and platform profile
support.
In contrast to earlier Surface Pro generations, the keyboard cover is
now also connected via the Surface Aggregator Module (whereas it was
previously connected via USB or HID-over-I2C). To properly support the
HID devices of that cover, however, more changes regarding hot-removal
of Surface Aggregator client devices as well as a new device hub driver
are required. We will address those things in a follow-up series, so do
not add any HID device IDs just yet.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211028012845.1887219-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for new system type, which is a water-cooling flavor
of the VMOD001 system class, equipped with 48xSFP28 and 8xQSFP28
100G Ethernet ports.
System is recognized by "DMI_BOARD_NAME" and " DMI_PRODUCT_SKU"
matches, when these fields are set respectively to "VMOD001" and
"HI138".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20211023094022.4193813-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend systems of class VMOD0010 equipped with CoffeeLake COMEx module
with BIOS related attributes to represent various BIOS statuses.
These attributes "bios_active_image", "bios_auth_fail",
"bios_upgrade_fail", "bios_safe_mode" has been already added to modular
system. This all of them are already documented.
- "bios_active_image" - location of current active BIOS image (0: Top,
1: Bottom. The reported value should correspond to value expected by
OS in case of BIOS safe mode is 0. This bit is related to Intel
top-swap feature of DualBios on the same flash.
- "bios_auth_fail": BIOS upgrade is failed because provided BIOS image
is not signed correctly.
- "bios_upgrade_fail" BIOS upgrade is failed by some reason not related
to authentication. For example, due to physical SPI flash problem.
- "bios_safe_mod": - 0 : if BIOS is booted from a supposed active image;
1 : BIOS safe mechanism was enforced by hardware (CPLD).
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20211023094022.4193813-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for new system types "MQM97xx", which is based on Mellanox
Quantum-2 ASIC. It provides up to 64x400GB/s (IB) full bidirectional
bandwidth per port using PAM-4 modulation. The system support 32 OSFP
cages that can provide 64x400GB/s per port (two ports/cage). The system
fits standard 1U racks.
System is equipped with seven fan drawers and with per fan drawer LED
on backport panel and uses two-bytes for exposing CPLD Part Number
versions.
System is recognized by "DMI_BOARD_NAME" match, when this field is set
to "VMOD0010".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20211023094022.4193813-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An upcoming change to platform profiles will export `platform_profile_get`
as a symbol that can be used by other drivers. Avoid the collision.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026190835.10697-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An upcoming change to platform profiles will export `platform_profile_get`
as a symbol that can be used by other drivers. Avoid the collision.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026190835.10697-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is already checked when calling rtc_read_alarm.
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026171443.289-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For the majority of users this information will not be informative
as they've chosen to program the RTC before going to sleep.
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026171443.289-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Just hardcode the RTC to "rtc0" which is the default for
CONFIG_RTC_SYSTOHC_DEVICE and used by all standard x86 distros.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 59348401eb ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211026171443.289-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When CONFIG_INPUT is disabled, this driver now fails to link:
ld.lld: error: undefined symbol: devm_input_allocate_device
>>> referenced by system76_acpi.c
>>> platform/x86/system76_acpi.o:(system76_add) in archive drivers/built-in.a
ld.lld: error: undefined symbol: input_set_capability
>>> referenced by system76_acpi.c
>>> platform/x86/system76_acpi.o:(system76_add) in archive drivers/built-in.a
ld.lld: error: undefined symbol: devm_hwmon_device_register_with_info
>>> referenced by system76_acpi.c
>>> platform/x86/system76_acpi.o:(system76_add) in archive drivers/built-in.a
ld.lld: error: undefined symbol: battery_hook_unregister
>>> referenced by system76_acpi.c
>>> platform/x86/system76_acpi.o:(system76_remove) in archive drivers/built-in.a
Add Kconfig dependencies for each of these three.
Fixes: 0de30fc684 ("platform/x86: system76_acpi: Replace Fn+F2 function for OLED models")
Fixes: 95563d45b5 ("platform/x86: system76_acpi: Report temperature and fan speed")
Fixes: 76f7eba3e0 ("platform/x86: system76_acpi: Add battery charging thresholds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211022154901.904984-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It turns out that systemd-logind by default listens for KEY_RESTART input
events and reboots the machine, which isn't great - So use KEY_VENDOR for
the vendor specific identify button instead to not conflict.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/20211022124612.19780-1-peter@korsgaard.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211022090851.1065538-1-ye.guojin@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211022090722.1065457-1-ye.guojin@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since AML code on some Xiaomi laptops notifies the WMI hotkey with
0x20 event, we need ACPI_ALL_NOTIFY here to be able to handle it.
Signed-off-by: Mikalai Ramanovich <nikolay.romanovich.00@gmail.com>
Link: https://lore.kernel.org/r/20211015191322.73388-1-nikolay.romanovich.00@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for the Surface Laptop Studio.
In contrast to previous Surface Laptop models, this one has its HID
devices attached to target ID 1 (instead of 2). It also has a couple
more of them, including a new notifier for when the pen is stashed /
taken out of its place, a "Sys Control" device, and two other
unidentified HID devices with unknown usages.
Battery and performance profile interfaces remain the same.
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211021130904.862610-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new Surface Laptop Studio uses GPEs for lid events as well. Add an
entry for that so that the lid can be used to wake the device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211021111053.564133-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
RTC based wakeup from s0i3 doesn't work properly on some Green Sardine
platforms. Because of this, a newer SMU for Green Sardine has the ability
to pass wakeup time as argument of the upper 16 bits of OS_HINT message.
With older firmware setting the timer value in OS_HINT will cause firmware
to reject the hint, so only run this path on:
1) Green Sardine
2) Minimum SMU FW
3) RTC alarm armed during s0i3 entry
Using this method has some limitations that the s0i3 wakeup will need to
be between 4 seconds and 18 hours, so check those boundary conditions as
well and abort the suspend if RTC is armed for too short or too long of a
duration.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211020162946.10537-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the "argument" for the "message" is listed as a boolean
value. This works well for the commands used currently, but an
additional upcoming command will pass more data in the message.
Expand it to be a full 32 bit value.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211020162946.10537-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit 9bba962755.
The above commit was added to prevent the tipd driver from loading
in devices which have INT3515 ACPI nodes since high CPU load was
reported in these devices due to interrupt flood. Now that the issue
of interrupt flood in the tipd driver is fixed, re-enable the creation
of platform device for INT3515 ACPI nodes.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Link: https://lore.kernel.org/r/20211020022620.21012-3-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a driver providing access to the GPIOs for the identify button and led
present on Barco P50 board, based on the pcengines-apuv2.c driver.
There is unfortunately no suitable ACPI entry for the EC communication
interface, so instead bind to boards with "P50" as their DMI product family
and hard code the I/O port number (0x299).
The driver also hooks up the leds-gpio and gpio-keys-polled drivers to the
GPIOs, so they are finally exposed as:
LED:
/sys/class/leds/identify
Button: (/proc/bus/input/devices)
I: Bus=0019 Vendor=0001 Product=0001 Version=0100
N: Name="identify"
P: Phys=gpio-keys-polled/input0
S: Sysfs=/devices/platform/barco-p50-gpio/gpio-keys-polled/input/input10
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=3
B: KEY=1000000 0 0 0 0 0 0
Signed-off-by: Santosh Kumar Yadav <santoshkumar.yadav@barco.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20211020123634.2638-1-peter@korsgaard.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:
drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
else if ((strlencmp(cmd, "level disengaged") == 0) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.
This should clearly be a logical OR so change it to fix the warning.
Fixes: fe98a52ce7 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211018182537.2316800-1-nathan@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211018091750.858826-1-ye.guojin@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the coccicheck warnings:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1634280641-4862-1-git-send-email-wangqing@vivo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION()
macro and the ACPI handle produced by the former comes from the
ACPI device object produced by the latter, so it is way more
straightforward to evaluate the latter directly instead of passing
the handle produced by the former to acpi_bus_get_device().
Modify ideapad_acpi_add() accordingly (no intentional functional
impact).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/8000884.T7Z3S40VBb@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If the ACPI companion of a given device is not present, the result
of the ACPI_HANDLE() evaluation for it will be NULL, so calling
acpi_bus_get_device() on ACPI_HANDLE() result in order to validate
it is redundant.
Drop the redundant acpi_bus_get_device() call from mshw0011_notify()
along with a local variable related to it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/3160001.aeNJFYEL58@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION()
macro and the ACPI handle produced by the former comes from the
ACPI device object produced by the latter, so it is way more
straightforward to evaluate the latter directly instead of passing
the handle produced by the former to acpi_bus_get_device().
Modify s3_wmi_check_platform_device() accordingly (no intentional
functional impact).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/12896717.uLZWGnKmhe@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Create the attribute groups for kb_led_color and set the `groups` field
in kb_led. While touching it, also change its show method to use
sysfs_emit() instead of sprintf().
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211006202202.7479-5-tcrawford@system76.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
System76 laptops running open source EC firmware support configuring
charging thresholds through ACPI methods. Expose this functionality
through the standard sysfs entries charge_control_{start,end}_threshold.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211006202202.7479-4-tcrawford@system76.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
System76 laptops models with OLED displays do not support the default
Fn+F2 behavior of turning the embedded display on and off. Some models
instead introduce a new notify event that is used to lock the screen so
the OS will put the display in a low power state.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211006202202.7479-3-tcrawford@system76.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a hwmon interface to report CPU/GPU temperature and fan speed.
sensors now reports an ACPI interface with the entries:
system76_acpi-acpi-0
Adapter: ACPI interface
CPU fan: 0 RPM
GPU fan: 0 RPM
CPU temp: +47.0°C
GPU temp: +0.0°C
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211006202202.7479-2-tcrawford@system76.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add new registers to support systems with multiply cooling devices.
Modular systems support up-to four cooling devices. This capability
is detected according to the registers initial setting.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093609.3771576-1-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Provide support for the Nvidia MSN4800-XX line cards for MSN4800
Ethernet modular switch system, providing a high performance switching
solution for Enterprise Data Centers (EDC) for building Ethernet based
clusters, High-Performance Computing (HPC) and embedded environments.
Initial version provides support for line card type MSN4800-C16. This
type of line card is equipped with:
- Lattice CPLD device, used for system and ports control.
- four Nvidia gearbox devices, used for port splitting.
- FPGA device, used for gearboxes management.
- 16x100G QSFP28 ports.
- hotpswap controllers, voltage regulators, analog-to-digital
convertors, nvram devices.
- status LED.
During initialization driver creates:
- line card's I2C tree through "i2c-mux-mlxcpd" driver.
- line card's LED objects through "leds-mlxreg" driver.
- line card's CPLD register space input / output "hwmon" attributes for
line control and monitoring through "mlxreg-io" driver. These
attributes provide CPLD and FPAG versioning, control for upgradable
components burning, NVRAM devices write protection, line card
revision, line card power consuming, line card reset cause
indication, etcetera.
Lattice CPLD device and nvram devices are feeding from auxiliary power
domain and accessible, when line card is powered off. These devices
are connected by line card driver probing routine, invoked after line
card security verification is done by hardware and event lc#n_verified
is received for line card located in slot #n.
Gearboxes, FPGA, hotpswap controllers, voltage regulators,
analog-to-digital convertors are feeding from main power domain. These
devices are connected after power good event "lc#n_powered" is received
for line card located in slot #n.
The driver 'mlxreg-lc' is driven by 'mlxreg-hotplug' driver following
relevant "hotplug" events.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-8-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend maximum number of the attributes, exposed to 'sysfs'.
It is requires in order to support modular systems, which
provide more attributes for system control, statuses and info.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20211002093238.3771419-6-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
David E. Box