Converting error to debug print if sink fails to configure scrambling or
TMDS bit clock ratio. In this case, we are timing out while disabling
the scrambling and setting the SCDC ratio, as there is no response
to the I2C SCDC write from the sink device. Error isn't due to something
wrong done from driver side.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302213807.6488-1-swati2.sharma@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The Thundersoft TST178 tablet uses a DSI panel with an external PWM
controller (as all DSI panels do). But unlike other DSI panels a duty-cycle
of 100% turns the backlight off and 0% sets it to maximum brightness.
I've checked the VBT and there is a BDB_LVDS_BACKLIGHT section, but
it does not set the active_low_pwm flag. This tablet re-uses the main
PCI vendor and product ids for the subsystem ids, so I see no other option
then to add a DMI based quirk to fix this.
Note that the PWM backlight code in intel_panel.c currently does not honor
the vbt.active_low_pwm flag, but that does not matter in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221172927.510027-2-hdegoede@redhat.com
Use intel_panel_compute_brightness() from pwm_setup_backlight() so that
we correctly take i915_modparams.invert_brightness and/or
QUIRK_INVERT_BRIGHTNESS into account when setting + getting the initial
brightness value.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221172927.510027-1-hdegoede@redhat.com
intel_ddi_clock_get() tests the DPLL ID against DPLL_ID_ICL_TBTPLL (2)
to determine whether to try to descend into a TBT-specific handler.
However this test will also be true when DPLL4 on EHL is used since that
shares the same DPLL ID (2).
Add an extra check to ensure the PHY is actually a Type-C PHY before
descending into the TBT handling. This should ensure EHL still takes
the correct code path and somewhat future-proof the code as well.
v2: Drop the gen+ check since only gen11+ platforms can have Type-C
outputs. (Imre)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1369
Fixes: 45e4728b87 ("drm/i915: Move DPLL frequency calculation to intel_dpll_mgr.c")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303195043.959913-1-matthew.d.roper@intel.com
The X1 Extreme is one of the systems that lies about which backlight
interface that it uses in its VBIOS as PWM backlight controls don't work
at all on this machine. It's possible that this panel could be one of
the infamous ones that can switch between PWM mode and DPCD backlight
control mode, but we haven't gotten any more details on this from Lenovo
just yet. For the time being though, making sure the backlight 'just
works' is a bit more important.
So, add a quirk to force DPCD backlight controls on for these systems
based on EDID (since this panel doesn't appear to fill in the device ID).
Hopefully in the future we'll figure out a better way of probing this.
Changes since v2:
* The bugzilla URL is deprecated, bug reporting happens on gitlab now.
Update the messages we print to reflect this
* Also, take the opportunity to move FDO_BUG_URL out of i915_utils.c and
into i915_utils.h so that other places which print things that aren't
traditional errors but are worth filing bugs about, can actually use
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303215320.93491-1-lyude@redhat.com
The whole point of using OUIs is so that we can recognize certain
devices and potentially apply quirks for them. Normally this should work
quite well, but there appears to be quite a number of laptop panels out
there that will fill the OUI but not the device ID. As such, for devices
like this I can't imagine it's a very good idea to try relying on OUIs
for applying quirks. As well, some laptop vendors have confirmed to us
that their panels have this exact issue.
So, let's introduce the ability to apply DP quirks based on EDID
identification. We reuse the same quirk bits for OUI-based quirks, so
that callers can simply check all possible quirks using
drm_dp_has_quirk().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211183358.157448-2-lyude@redhat.com
DP shim's config_stream_type considered to be succeeded when
return value of intel_dp_hdcp2_write_msg() equals to size of
message to be written, it makes config_stream_type to return
a zero success value in order to succeed the HDCP auth.
v2:
- config_stream_type() returns 0 on success. [Ram]
CC: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303073838.25871-1-anshuman.gupta@intel.com
HDCP Repeater initializes seq_num_V to 0 at the beginning of
hdcp Session i.e. after AKE_init received, refer
HDCP 2.2 Spec HDMI PAGE 19, DP PAGE 20.
HDCP 2.2 Comp specs 1B-06 test verifies that whether DUT
considers failure of authentication if the repeater provides a
non-zero value in seq_num_V in the first,
RepeaterAuth_Send_ReceiverID_List message.
Make sure that HDCP repeater initializes seq_num_V to zero at
beginning of session i.e. after AKE_Init, fail the Auth if
there is non zero seq_num_V.
v2:
- Used existing hdcp2_encrypted flag instead of
declaring new flag. [Ram]
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220123217.23635-2-anshuman.gupta@intel.com
It irks me to use crtc_state_is_legacy_gamma() inside the guts
of the CHV color management code. Let's get rid of it and instead
just consult cgm_mode to figure out if we want to enable the pipe
gamma or the CGM gamma.
Also CHV display engine is based on i965/g4x so we should fall back
to the i965 path when the CGM gamma is not used.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107151725.10507-3-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Add intel_vgpu_register() abstraction, rename i915_detect_vgpu() to
intel_vgpu_detect() to match other function naming, un-inline
intel_vgpu_active(), intel_vgpu_has_full_ppgtt() and
intel_vgpu_has_huge_gtt() to reduce header interdependencies.
The i915_vgpu.[ch] filename and intel_vgpu_ prefix discrepancy remains.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-1-jani.nikula@intel.com
has_transcoder() was unused because function which was using it,
intel_display_capture_error_state() defined under
CONFIG_DRM_I915_CAPTURE_ERROR.
Moving has_transcoder() to under CONFIG_DRM_I915_CAPTURE_ERROR.
No functional change.
Fixes: d54c1a513c ("drm/i915: Fix broken transcoder err state")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227175147.11362-1-anshuman.gupta@intel.com
Converts remaining instances of the printk based logging macros in
i915/display/intel_hdcp.c with the struct drm_device based macros
manually.
This is continuation of commit 65833c4638 ("drm/i915/hdcp: conversion
to struct drm_device based logging macros.")
v2:
i915_dev_priv is used instead of drm_device for reusability [JaniN]
v3:
Made it independent from the series.
once instance of dev_priv naming is changed to i915 [Jani N]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212123007.6659-1-ramalingam.c@intel.com
All platforms using the shared DPLL framework use 3 reference clocks for
their DPLLs: SSC, non-SSC and DSI. For a more unified way across
platforms store the frequency of these ref clocks as part of the DPLL
global state. This also allows us to keep the HW access reading out the
ref clock value separate from the DPLL frequency calculation that
depends on the ref clock.
For now add only the SSC and non-SSC ref clocks, as the pre-ICL DSI code
has its own logic for calculating DPLL parameters instead of the shared
DPLL framework.
v2:
- Apply the ICL combo PHY PLL ref_clock/2 adjustment during the
frequency->PLL param conversion direction as well. (CI shards)
- s/kHZ/kHz/ (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228153328.17842-1-imre.deak@intel.com
The types of PLLs used for HDMI/DP on HSW are WRPLL/LCPLL accordingly,
so use these names to align better with the rest of WRPLL/LCPLL function
names elsewhere.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-9-imre.deak@intel.com
For clarity keep the SKL DPLL ref clock in a variable instead of
open-coding it. Store the value in kHZ units as done on other platforms.
This allows us in a later patch to keep track of the DPLL ref clock in a
more unified way across all platforms.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-8-imre.deak@intel.com
Move all the DPLL params->DPLL frequency conversion functions to
intel_dpll_mgr.c where the corresponding inverse conversions are.
The GEN11+ TBT PLL outputs multiple frequencies and for selecting the
one in use we need to check the DDI CLK mux. As part of the DDI clock
logic this selection is kept in intel_ddi.c.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-7-imre.deak@intel.com
For clarity add a new DPLL specific struct to the i915 device struct and
move all DPLL fields into it. Accordingly remove the dpll_ prefixes, as
the new struct already provides the required namespacing.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-4-imre.deak@intel.com
There seems to be a bit of confusing redundancy in a way, how
plane data rate/min cdclk are calculated.
In fact both min cdclk, pixel rate and plane data rate are all
part of the same formula as per BSpec.
However currently we have intel_plane_data_rate, which is used
to calculate plane data rate and which is also used in bandwidth
calculations. However for calculating min_cdclk we have another
piece of code, doing almost same calculation, but a bit differently
and in a different place. However as both are actually part of same
formula, probably would be wise to use plane data rate calculations
as a basis anyway, thus avoiding code duplication and possible bugs
related to this.
Another thing is that I've noticed that during min_cdclk calculations
we account for plane scaling, while for plane data rate, we don't.
crtc->pixel_rate seems to account only for pipe ratio, however it is
clearly stated in BSpec that plane data rate also need to account
plane ratio as well.
So what this commit does is:
- Adds a plane ratio calculation to intel_plane_data_rate
- Removes redundant calculations from skl_plane_min_cdclk which is
used for gen9+ and now uses intel_plane_data_rate as a basis from
there as well.
v2: - Don't use 64 division if not needed(Ville Syrjälä)
- Now use intel_plane_pixel_rate as a basis for calculations both
at intel_plane_data_rate and skl_plane_min_cdclk(Ville Syrjälä)
v3: - Again fix the division macro
- Fix plane_pixel_rate to pixel_rate at intel_plane_pixel_rate
callsites
v4: - Renamed skl_plane_ratio function back(Ville Syrjälä)
v5: - Don't precalculate plane pixel rate for invisible plane,
check for visibility first, as in invisible case it will
have dst_w and dst_h equal to zero, causing divide error.
v6: - Removed useless warn in intel_plane_pixel_rate(Ville Syrjälä)
- Fixed alignment in intel_plane_data_rate(Ville Syrjälä)
- Changed pixel_rate type to be unsigned int in
skl_plane_min_cdclk(Ville Syrjälä)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227150935.2107-1-stanislav.lisovskiy@intel.com
Supposedly both src coordinates have to even when doing 90/270
degree rotation with RGB565. This is definitely true for the
X coordinate (we just get a black screen when it is odd). My
experiments didn't show any misbehaviour with an odd
Y coordinate, but let's trust the spec and reject that one
as well.
v2: Ignore ccs hsub/vsub
v3: Clarify the CCS special (Maarten)
Deal with tgl+ CCS modifiers where we
do need to look at hsub/vsub
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228160523.1064-1-ville.syrjala@linux.intel.com
Some devices with a builtin panel have the panel mounted upside down,
this is indicated by the rotate_180 bit in the BDB_GENERAL_FEATURES VBT
block.
We store this info in dev_priv->vbt.orientation, use this to set the
connector's orientation property so that fbcon and userspace will show
the image the right way up on devices with an upside-down mounted panel.
This fixes the image being upside-down on a Teclast X89 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228114110.187792-3-hdegoede@redhat.com
Commit 82daca2975 ("drm/i915: Add "panel orientation" property to the
panel connector, v6.") uses hardware state readback to determine if the
GOP is rotating the image by 180 degrees to compensate for upside-down
mounted panels.
When I wrote that commit I tried to find the VBT bits the GOP used to
decide to rotate the image, but I could not find them. Back then I only
looked at the rotation bits in struct mipi_config and these read 0 on
the 1 BYT device I have with an upside-down mounted panel
(a GP-electronic T701 tablet). While working on a similar problem on a
BYT device with an eDP panel I noticed that the new
intel_dsi_get_panel_orientation() helper which gets used on newer
SoCs (Apollo-Lake, etc.) checks the rotate_180 bit in the
BDB_GENERAL_FEATURES VBT block.
I've checked and this bit indeed is set on the GP-electronic T701 tablet,
so using the generic intel_dsi_get_panel_orientation() helper there does
the right thing without needing any extra readback of hw state.
This commit removes the special handling of the panel orientation for
DSI panels on BYT/CHT devices, bringing the handling in line with the
handling of DSI panels on other devices.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228114110.187792-2-hdegoede@redhat.com
Having an array pipe_crc[I915_MAX_PIPES] in struct drm_i915_private
should be an obvious clue this should be located in struct intel_crtc
instead. Make it so.
As a side-effect, fix some errors in indexing pipe_crc with both pipe
and crtc index. And, of course, reduce the size of i915_drv.h.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227161253.15741-1-jani.nikula@intel.com
As a disabled pipe in pipe_mask is not having a valid intel crtc,
driver wrongly populates the possible_crtcs mask while initializing
the plane for a CRTC. Fixing up the plane possible_crtcs mask.
changes since RFC:
- Simplify the possible_crtcs initialization. [Ville]
v2:
- Removed the unnecessary stack garbage possible_crtcs to
drm_universal_plane_init. [Ville]
v3:
- Combine the intel_crtc assignment and declaration. [Ville]
v4:
- Fix possible_crtcs abused bits from
intel_{primary,curosr,sprite}_plane_create(). [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226163517.31234-1-anshuman.gupta@intel.com
Looks like the pipe rounding mode bit has moved from PIPE_CHICKEN to
PIPE_MISC on tgl. Frob the new location.
Bspec does still document the old bits as well, so I left the code
for them as is until we get clarification from the hw folks on
whether the old bits still do something useful.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226163054.9509-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The #include has been splattered all over the place, but there are
precious few places, all .c files, that actually need it.
v2: remove leftover double newlines
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225133131.3301-1-jani.nikula@intel.com
On Tiger Lake we do not support source keying in the pixel formats P010,
P012, P016.
v2: Move WA to end of function. Create helper function for format
check. Less verbose debugging messaging.
v3: whitespace
v4(MattR):
- Actually return EINVAL to reject this combination.
- Pass format parameter as u32.
- Make test TGL-specific for now.
- Switch to per-device logging.
- Shorten/simplify comment.
Bspec: 52890
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224223651.3801646-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
On gen12, we no longer need to disable DC5/DC6 when when PG2 is in use
(which translates to cases where we're using VDSC on pipe A).
Bspec: 49193
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220231843.3127468-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
skl_ddb_allocation_overlaps() num_entries hass been passed as
INTEL_NUM_PIPES, it should be I915_MAX_PIPES.
v2:
- Rebased.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-8-anshuman.gupta@intel.com
Add a WARN_ON for a disabled pipe in pipe_mask at
intel_get_crtc_for_pipe() function.
v2:
- Use drm_WARN_ON instead of WARN_ON.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-7-anshuman.gupta@intel.com
intel_plane_fb_max_stride should return the max stride of
primary plane for first available pipe in intel device info
pipe_mask.
Similarly glk_force_audio_cdclk() should also use the first
available CRTC instead of pipe 'A' crtc to force the cdclk
changes.
changes since RFC:
- Introduced a helper to get first intel_crtc intel_get_first_crtc. [Ville]
v1:
- Used intel_get_first_crtc() instead of PIPE_A crtc in
glk_force_audio_cdclk(). [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-6-anshuman.gupta@intel.com
Skip the transcoder whose pipe is disabled while
initializing transcoder error state in 3 non-contiguous
display pipe system.
v2:
- Don't skip EDP_TRANSCODER error state. [Ville]
- Use a helper has_transcoder(). [Ville]
v3:
- Removed DSI transcoder case from has_transcoder(),
and few other cosmetic changes. [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-4-anshuman.gupta@intel.com
we can't have (pipe == crtc->index) assumption in
driver in order to support 3 non-contiguous
display pipe system.
FIXME: Remove the WARN_ON(drm_crtc_index(&crtc->base) != crtc->pipe)
when we will fix all such assumption.
changes since RFC:
- Added again removed (pipe == crtc->index) WARN_ON.
- Pass drm_crtc_index instead of intel pipe in order to
call drm_handle_vblank().
v2:
- Used drm_crtc_handle_vblank()/drm_crtc_wait_one_vblank()
instead of drm_handle_vblank/drm_wait_one_vblank(). [Jani]
- Introduced intel_handle_vblank() helper to avoid sprinkle
of intel_crtc across irq_handlers. [Ville]
v3:
- Moved intel_handle_vblank() from header to i915_irq.c. [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-3-anshuman.gupta@intel.com
It should not be assumed that a disabled display pipe will be
always last the pipe.
for_each_pipe() should iterate over I915_MAX_PIPES and check
for the disabled pipe and skip that pipe so that it should not
initialize the intel crtc for any disabled pipes.
Due to changes in for_each_pipe() macro, it requires to handle
the below compilation error.
"suggest explicit braces to avoid ambiguous ‘else’
[-Werror=dangling-else]"
v2:
- Cosmetic changes, removed unwanted parentheses. [Ville]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224124004.26712-2-anshuman.gupta@intel.com
Split inte_modeset_init() to parts before and after irq install, to
facilitate further cleanup. The error paths are a mess, otherwise no
functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224120828.22105-1-jani.nikula@intel.com
Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.
Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com
Commit 60c6a14b48 ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
Fixes: 60c6a14b48 ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Tested-by: Ross Zwisler <zwisler@google.com>
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
Restore the previous WARN_ON(cond) so that we don't complain about poor
old Cherryview.
Fixes: eb020ca3d4 ("drm/i915/display/dp: Make WARN* drm specific where drm_device ptr is available")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223173959.3885742-1-chris@chris-wilson.co.uk
Swati Sharma