Unshare the DAX and iomap buffered I/O page zeroing code. This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code. Instead move these checks
into the callers. Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-19-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
fixes for the combination of the inline_data and fast_commit fixes,
and more accurately calculating when to schedule additional lazy inode
table init, especially when CONFIG_HZ is 100HZ.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmGMDF0ACgkQ8vlZVpUN
gaNW+Af+JGM6VFLMCxwrpRHQB76/CCo6/oAxr7yy1HdRl0k64/hLpH1bGJcBDxz1
4x8Uof1G97ZPv/yqbFnxTv64BEFTh9MkHQCO2nDNzhiq8xQHJqN0SjaMoUqWJWoL
gnXlGxpnEXVDhXxOK8/qhAAzH2r/zbeGVAxn7JzTmGXQLM6EcYqCKLlijGcOdNzR
ENvCeNwUOL94ImvtDcETtSXX4GKpFgd+LsTmKajMDiWkHUJ+8ChMGpd8JBHLBT8N
IfxdLGqFYY0FXAFcnpSMRhS3koV9L8buWvSZsK+dx+/j9Shn6qiHFuxOgZqpVQwh
lFmgRrUrMSoLNsBCTWhvBVghmlAixg==
=QUNC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Only bug fixes and cleanups for ext4 this merge window.
Of note are fixes for the combination of the inline_data and
fast_commit fixes, and more accurately calculating when to schedule
additional lazy inode table init, especially when CONFIG_HZ is 100HZ"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix error code saved on super block during file system abort
ext4: inline data inode fast commit replay fixes
ext4: commit inline data during fast commit
ext4: scope ret locally in ext4_try_to_trim_range()
ext4: remove an unused variable warning with CONFIG_QUOTA=n
ext4: fix boolreturn.cocci warnings in fs/ext4/name.c
ext4: prevent getting empty inode buffer
ext4: move ext4_fill_raw_inode() related functions
ext4: factor out ext4_fill_raw_inode()
ext4: prevent partial update of the extent blocks
ext4: check for inconsistent extents between index and leaf block
ext4: check for out-of-order index extents in ext4_valid_extent_entries()
ext4: convert from atomic_t to refcount_t on ext4_io_end->count
ext4: refresh the ext4_ext_path struct after dropping i_data_sem.
ext4: ensure enough credits in ext4_ext_shift_path_extents
ext4: correct the left/middle/right debug message for binsearch
ext4: fix lazy initialization next schedule time computation in more granular unit
Revert "ext4: enforce buffer head state assertion in ext4_da_map_blocks"
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmGFN6IACgkQnJ2qBz9k
QNkfYwgA1w5x/CsN2IMZdx6FTuZFgbOvQpBMTry8iuOPKK3UyIkZaUirTVLKR0cm
k3QbBR9/vTfQTNg5weuFJcbPZZaCXKEvlPGvDh+pumMbfTkMwL3FADweNBoZ3PzO
EiRrV45AbRgSMOzsfURzCz1T53Gd8fYM3pXxmNXG+bnE7+Ea+heKgor8/jFc4U3w
kAKZTfyCiheo7KxVhFGnkGI3ZhIbnbZne4seY/CE4qtv7/bmBE7bhGpmv8LT5FUn
h/JBDLjFU0fzJpplXE6n/VHXeGaUwb8adnYpzojWQ0lLYFrMIZFQ0KkDK6PNwmJF
MKWGqRxDkf54oeWuEAJ9t4/OorqM9A==
=ltE7
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"Support for reporting filesystem errors through fanotify so that
system health monitoring daemons can watch for these and act instead
of scraping system logs"
* tag 'fsnotify_for_v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits)
samples: remove duplicate include in fs-monitor.c
samples: Fix warning in fsnotify sample
docs: Fix formatting of literal sections in fanotify docs
samples: Make fs-monitor depend on libc and headers
docs: Document the FAN_FS_ERROR event
samples: Add fs error monitoring example
ext4: Send notifications on error
fanotify: Allow users to request FAN_FS_ERROR events
fanotify: Emit generic error info for error event
fanotify: Report fid info for file related file system errors
fanotify: WARN_ON against too large file handles
fanotify: Add helpers to decide whether to report FID/DFID
fanotify: Wrap object_fh inline space in a creator macro
fanotify: Support merging of error events
fanotify: Support enqueueing of error events
fanotify: Pre-allocate pool of error events
fanotify: Reserve UAPI bits for FAN_FS_ERROR
fsnotify: Support FS_ERROR event type
fanotify: Require fid_mode for any non-fd event
fanotify: Encode empty file handle when no inode is provided
...
ext4_abort will eventually call ext4_errno_to_code, which translates the
errno to an EXT4_ERR specific error. This means that ext4_abort expects
an errno. By using EXT4_ERR_ here, it gets misinterpreted (as an errno),
and ends up saving EXT4_ERR_EBUSY on the superblock during an abort,
which makes no sense.
ESHUTDOWN will get properly translated to EXT4_ERR_SHUTDOWN, so use that
instead.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20211026173302.84000-1-krisman@collabora.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since there are no blocks in an inline data inode, there's no point in
fixing iblocks field in fast commit replay path for this inode.
Similarly, there's no point in fixing any block bitmaps / global block
counters with respect to such an inode. Just bail out from these
functions if an inline data inode is encountered.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211015182513.395917-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During the commit phase in fast commits if an inode with inline data
is being committed, also commit the inline data along with
inode. Since recovery code just blindly copies entire content found in
inode TLV, there is no change needed on the recovery path. Thus, this
change is backward compatiable.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211015182513.395917-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As commit 6920b39132 ("ext4: add new helper interface
ext4_try_to_trim_range()") moves some code into the separate function
ext4_try_to_trim_range(), the use of the variable ret within that
function is more limited and can be adjusted as well.
Scope the use of the variable ret locally and drop dead assignments.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210820120853.23134-1-lukas.bulwahn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'enable_quota' variable is only used in an CONFIG_QUOTA.
With CONFIG_QUOTA=n, compiler causes a harmless warning:
fs/ext4/super.c: In function ‘ext4_remount’:
fs/ext4/super.c:5840:6: warning: variable ‘enable_quota’ set but not used
[-Wunused-but-set-variable]
int enable_quota = 0;
^~~~~
Move 'enable_quota' into the same #ifdef CONFIG_QUOTA block
to remove an unused variable warning.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210824034929.GA13415@raspberrypi
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return statements in functions returning bool should use true/false
instead of 1/0.
./fs/ext4/namei.c:1441:12-13:WARNING:return of 0/1 in function
'ext4_match' with return type bool
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210824055543.58718-1-deng.changcheng@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_get_inode_loc(), we may skip IO and get an zero && uptodate
inode buffer when the inode monopolize an inode block for performance
reason. For most cases, ext4_mark_iloc_dirty() will fill the inode
buffer to make it fine, but we could miss this call if something bad
happened. Finally, __ext4_get_inode_loc_noinmem() may probably get an
empty inode buffer and trigger ext4 error.
For example, if we remove a nonexistent xattr on inode A,
ext4_xattr_set_handle() will return ENODATA before invoking
ext4_mark_iloc_dirty(), it will left an uptodate but zero buffer. We
will get checksum error message in ext4_iget() when getting inode again.
EXT4-fs error (device sda): ext4_lookup:1784: inode #131074: comm cat: iget: checksum invalid
Even worse, if we allocate another inode B at the same inode block, it
will corrupt the inode A on disk when write back inode B.
So this patch initialize the inode buffer by filling the in-mem inode
contents if we skip read I/O, ensure that the buffer is really uptodate.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for calling ext4_fill_raw_inode() in
__ext4_get_inode_loc(), move three related functions before
__ext4_get_inode_loc(), no logical change.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_fill_raw_inode() from ext4_do_update_inode(), which is
use to fill the in-mem inode contents into the inode table buffer, in
preparation for initializing the exclusive inode buffer without reading
the block in __ext4_get_inode_loc().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the most error path of current extents updating operations are not
roll back partial updates properly when some bad things happens(.e.g in
ext4_ext_insert_extent()). So we may get an inconsistent extents tree
if journal has been aborted due to IO error, which may probability lead
to BUGON later when we accessing these extent entries in errors=continue
mode. This patch drop extent buffer's verify flag before updatng the
contents in ext4_ext_get_access(), and reset it after updating in
__ext4_ext_dirty(). After this patch we could force to check the extent
buffer if extents tree updating was break off, make sure the extents are
consistent.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that we can check out overlapping extents in leaf block and
out-of-order index extents in index block. But the .ee_block in the
first extent of one leaf block should equal to the .ei_block in it's
parent index extent entry. This patch add a check to verify such
inconsistent between the index and leaf block.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210908120850.4012324-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 5946d08937 ("ext4: check for overlapping extents in
ext4_valid_extent_entries()"), we can check out the overlapping extent
entry in leaf extent blocks. But the out-of-order extent entry in index
extent blocks could also trigger bad things if the filesystem is
inconsistent. So this patch add a check to figure out the out-of-order
index extents and return error.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1626674355-55795-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we drop i_data sem, we need to reload the ext4_ext_path
structure since the extent tree can change once i_data_sem is
released.
This addresses the BUG:
[52117.465187] ------------[ cut here ]------------
[52117.465686] kernel BUG at fs/ext4/extents.c:1756!
...
[52117.478306] Call Trace:
[52117.478565] ext4_ext_shift_extents+0x3ee/0x710
[52117.479020] ext4_fallocate+0x139c/0x1b40
[52117.479405] ? __do_sys_newfstat+0x6b/0x80
[52117.479805] vfs_fallocate+0x151/0x4b0
[52117.480177] ksys_fallocate+0x4a/0xa0
[52117.480533] __x64_sys_fallocate+0x22/0x30
[52117.480930] do_syscall_64+0x35/0x80
[52117.481277] entry_SYSCALL_64_after_hwframe+0x44/0xae
[52117.481769] RIP: 0033:0x7fa062f855ca
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-4-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Like ext4_ext_rm_leaf, we can ensure that there are enough credits
before every call that will consume credits. As part of this fix we
fold the functionality of ext4_access_path() into
ext4_ext_shift_path_extents(). This change is needed as a preparation
for the next bugfix patch.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-3-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The debuginfo for binsearch want to show the left/middle/right extent
while the process search for the goal block. However we show this info
after we change right or left.
Link: https://lore.kernel.org/r/20210903062748.4118886-2-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 file system has default lazy inode table initialization setup once
it is mounted. However, it has issue on computing the next schedule time
that makes the timeout same amount in jiffies but different real time in
secs if with various HZ values. Therefore, fix by measuring the current
time in a more granular unit nanoseconds and make the next schedule time
independent of the HZ value.
Fixes: bfff68738f ("ext4: add support for lazy inode table initialization")
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210902164412.9994-2-shaoyi@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 948ca5f30e.
Two crash reports from users running variations on 5.15-rc4 kernels
suggest that it is premature to enforce the state assertion in the
original commit. Both crashes were triggered by BUG calls in that
code, indicating that under some rare circumstance the buffer head
state did not match a delayed allocated block at the time the
block was written out. No reproducer is available. Resolving this
problem will require more time than remains in the current release
cycle, so reverting the original patch for the time being is necessary
to avoid any instability it may cause.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20211012171901.5352-1-enwlinux@gmail.com
Fixes: 948ca5f30e ("ext4: enforce buffer head state assertion in ext4_da_map_blocks")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock. In the most basic scenario, that buffer will not be
resident and it will be mapped to the same file. Accessing the buffer
will trigger a page fault, and gfs2 will deadlock trying to take the
same inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmGBPisUHGFncnVlbmJh
QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTpE6A/7BezUnGuNJxJrR8pC+vcLYA7xAgUU
6STQ6IN7w5UHRlSkNzZxZ2XPxW4uVQ4SxSEeaLqBsHZihepjcLNFZ/8MhQ6UPSD0
8noHOi7CoIcp6IuWQtCpxRM/xjjm2SlMt2XbVJZaiJcdzCV9gB6TU9EkBRq7Zm/X
9WFBbv1xZF0skn9ISCJvNtiiI+VyWKgMDUKxJUiTQjmJcklyyqHcVGmQi9BjqPz4
4s3F+WH6CoGbDKlmNk/6Y9wZ/2+sbvGswVscUxPwJVPoZWsR1xBBUdAeAmEMD1P4
BgE/Y1J8JXyVPYtyvZKq70XUhKdQkxB7RfX87YasOk9mY4Kjd5rIIGEykh+o2vC9
kDhCHvf2Mnw5I6Rum3B7UXyB1vemY+fECIHsXhgBnS+ztabRtcAdpCuWoqb43ymw
yEX1KwXyU4FpRYbrRvdZT42Fmh6ty8TW+N4swg8S2TrffirvgAi5yrcHZ4mPupYv
lyzvsCW7Wv8hPXn/twNObX+okRgJnsxcCdBXARdCnRXfA8tH23xmu88u8RA1Vdxh
nzTvv6Dx2EowwojuDWMx29Mw3fA2IqIfbOV+4FaRU7NZ2ZKtknL8yGl27qQUsMoJ
vYsHTmagasjQr+NDJ3vQRLCw+JQ6B1hENpdkmixFD9moo7X1ZFW3HBi/UL973Bv6
5CmgeXto8FRUFjI=
=WeNd
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
Some cleanups for fs/crypto/:
- Allow 256-bit master keys with AES-256-XTS
- Improve documentation and comments
- Remove unneeded field fscrypt_operations::max_namelen
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYX8U4hQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyXYAP0d7BNuKsMyw6qlzLMxbaO5wdTg2HaD
04ApVeHM6qp7IQEA/Ve2Mr+BcPOZ7E6io8haZtXs0MrRMYeessKWcWMCdQ0=
=2WNZ
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Some cleanups for fs/crypto/:
- Allow 256-bit master keys with AES-256-XTS
- Improve documentation and comments
- Remove unneeded field fscrypt_operations::max_namelen"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: improve a few comments
fscrypt: allow 256-bit master keys with AES-256-XTS
fscrypt: improve documentation for inline encryption
fscrypt: clean up comments in bio.c
fscrypt: remove fscrypt_operations::max_namelen
Send a FS_ERROR message via fsnotify to a userspace monitoring tool
whenever a ext4 error condition is triggered. This follows the existing
error conditions in ext4, so it is hooked to the ext4_error* functions.
Link: https://lore.kernel.org/r/20211025192746.66445-30-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Use the sb_bdev_nr_blocks helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20211018101130.1838532-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't bother with pointless string parsing when the caller can just pass
the version in the format that the core expects. Also remove the
fallback to the latest version that none of the callers actually uses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Return the encoding table as the return value instead of as an argument,
and don't bother with the encoding flags as the caller can handle that
trivially.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
allocation. Also fix error handling code paths in ext4_dx_readdir()
and ext4_fill_super(). Finally, avoid a grabbing a journal head in
the delayed allocation write in the common cases where we are
overwriting an pre-existing block or appending to an inode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmFZ2SsACgkQ8vlZVpUN
gaN6DAgAkIeisL1EfQT0VwshEs8y7N6IoX8dydLSRLpNf5oWiJOv2CTY9Qpi6X/C
qNfuLsbJ2NXChvhIAM2hD82hvX21rYc6iqPxgho02VF4eYIP7NzLjwTFKnKbHPB5
TiF498nJTnkcmSrJUEXmSAEdLoCwa5THH9+9HVHXZrkLXPULBtOOJ85mDAcIzVhV
Zqb7yfbpWl0gnF0S0YjNATPtbhcC9EiC4MOVYVesRlgT9B3+k5q4fmVU0euTU9OH
F2H6TNG+Mg/19gTnDP5acB9+eXHvYEqMpe+CaDifR9iFE9PTG/Edhxr6z9roXhHr
kBvEVHSFH+YTEJXghnpS9YDd9Lwc9w==
=WKzd
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of ext4 bugs in fast_commit, inline data, and delayed
allocation.
Also fix error handling code paths in ext4_dx_readdir() and
ext4_fill_super().
Finally, avoid a grabbing a journal head in the delayed allocation
write in the common cases where we are overwriting a pre-existing
block or appending to an inode"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: recheck buffer uptodate bit under buffer lock
ext4: fix potential infinite loop in ext4_dx_readdir()
ext4: flush s_error_work before journal destroy in ext4_fill_super
ext4: fix loff_t overflow in ext4_max_bitmap_size()
ext4: fix reserved space counter leakage
ext4: limit the number of blocks in one ADD_RANGE TLV
ext4: enforce buffer head state assertion in ext4_da_map_blocks
ext4: remove extent cache entries when truncating inline data
ext4: drop unnecessary journal handle in delalloc write
ext4: factor out write end code of inline file
ext4: correct the error path of ext4_write_inline_data_end()
ext4: check and update i_disksize properly
ext4: add error checking to ext4_ext_replay_set_iblocks()
Commit 8e33fadf94 ("ext4: remove an unnecessary if statement in
__ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again
under buffer lock, which may overwrite the buffer if someone else have
already brought it uptodate and changed it.
Fixes: 8e33fadf94 ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()")
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com
When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry. For example:
1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
!= ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
only fill one dirent because the hash of the entry in block1(besides
the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
will fail, and since we has got the one entry, ksys_getdents64 can
return success
7. Latter we will trapped in a loop with step 4~6
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
The error path in ext4_fill_super forget to flush s_error_work before
journal destroy, and it may trigger the follow bug since
flush_stashed_error_work can run concurrently with journal destroy
without any protection for sbi->s_journal.
[32031.740193] EXT4-fs (loop66): get root inode failed
[32031.740484] EXT4-fs (loop66): mount failed
[32031.759805] ------------[ cut here ]------------
[32031.759807] kernel BUG at fs/jbd2/transaction.c:373!
[32031.760075] invalid opcode: 0000 [#1] SMP PTI
[32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded
4.18.0
[32031.765112] Call Trace:
[32031.765375] ? __switch_to_asm+0x35/0x70
[32031.765635] ? __switch_to_asm+0x41/0x70
[32031.765893] ? __switch_to_asm+0x35/0x70
[32031.766148] ? __switch_to_asm+0x41/0x70
[32031.766405] ? _cond_resched+0x15/0x40
[32031.766665] jbd2__journal_start+0xf1/0x1f0 [jbd2]
[32031.766934] jbd2_journal_start+0x19/0x20 [jbd2]
[32031.767218] flush_stashed_error_work+0x30/0x90 [ext4]
[32031.767487] process_one_work+0x195/0x390
[32031.767747] worker_thread+0x30/0x390
[32031.768007] ? process_one_work+0x390/0x390
[32031.768265] kthread+0x10d/0x130
[32031.768521] ? kthread_flush_work_fn+0x10/0x10
[32031.768778] ret_from_fork+0x35/0x40
static int start_this_handle(...)
BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this
Besides, after we enable fast commit, ext4_fc_replay can add work to
s_error_work but return success, so the latter journal destroy in
ext4_load_journal can trigger this problem too.
Fix this problem with two steps:
1. Call ext4_commit_super directly in ext4_handle_error for the case
that called from ext4_fc_replay
2. Since it's hard to pair the init and flush for s_error_work, we'd
better add a extras flush_work before journal destroy in
ext4_fill_super
Besides, this patch will call ext4_commit_super in ext4_handle_error for
any nojournal case too. But it seems safe since the reason we call
schedule_work was that we should save error info to sb through journal
if available. Conversely, for the nojournal case, it seems useless delay
commit superblock to s_error_work.
Fixes: c92dc85684 ("ext4: defer saving error info from atomic context")
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)
Below is a quick test to trigger it on a 64KB pagesize system.
sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello -> This will error out with
"echo: write error: File too large"
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.
Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.
Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().
Fixes: 51865fda28 ("ext4: let ext4 maintain extent status tree")
Cc: stable@kernel.org
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com
Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the
newly-added blocks, but the limit on the max value of
ee_len field is ignored, and it can lead to BUG_ON as
shown below when running command "fallocate -l 128M file"
on a fast_commit-enabled fs:
kernel BUG at fs/ext4/ext4_extents.h:199!
invalid opcode: 0000 [#1] SMP PTI
CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200
Call Trace:
? ext4_fc_write_inode+0xf2/0x150
ext4_fc_commit+0x93b/0xa00
? ext4_fallocate+0x1ad/0x10d0
ext4_sync_file+0x157/0x340
? ext4_sync_file+0x157/0x340
vfs_fsync_range+0x49/0x80
do_fsync+0x3d/0x70
__x64_sys_fsync+0x14/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Simply fixing it by limiting the number of blocks
in one EXT4_FC_TAG_ADD_RANGE TLV.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com
The max_namelen field is unnecessary, as it is set to 255 (NAME_MAX) on
all filesystems that support fscrypt (or plan to support fscrypt). For
simplicity, just use NAME_MAX directly instead.
Link: https://lore.kernel.org/r/20210909184513.139281-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
- Fix a race condition in the teardown path of raw mode pmem namespaces.
- Cleanup the code that filesystems use to detect filesystem-dax
capabilities of their underlying block device.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYTlBMgAKCRDfioYZHlFs
ZwQLAQCPhwpuOP+Byn7NksotnfmyLNyniK0mX7Me7PoLiyq0oAEAmqBwlr9YP7E3
NPzWiBzqPCvDIv1YG4C3Vam7ue1osgM=
=33O+
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
- Fix a race condition in the teardown path of raw mode pmem
namespaces.
- Cleanup the code that filesystems use to detect filesystem-dax
capabilities of their underlying block device.
* tag 'libnvdimm-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove bdev_dax_supported
xfs: factor out a xfs_buftarg_is_dax helper
dax: stub out dax_supported for !CONFIG_FS_DAX
dax: remove __generic_fsdax_supported
dax: move the dax_read_lock() locking into dax_supported
dax: mark dax_get_by_host static
dm: use fs_dax_get_by_bdev instead of dax_get_by_host
dax: stop using bdevname
fsdax: improve the FS_DAX Kconfig description and help text
libnvdimm/pmem: Fix crash triggered when I/O in-flight during unbind
Remove the code that re-initializes a buffer head with an invalid block
number and BH_New and BH_Delay bits when a matching delayed and
unwritten block has been found in the extent status cache. Replace it
with assertions that verify the buffer head already has this state
correctly set. The current code masked an inline data truncation bug
that left stale entries in the extent status cache. With this change,
generic/130 can be used to reproduce and detect that bug.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210819144927.25163-3-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Conditionally remove all cached extents belonging to an inode
when truncating its inline data. It's only necessary to attempt to
remove cached extents when a conversion from inline to extent storage
has been initiated (!EXT4_STATE_MAY_INLINE_DATA). This avoids
unnecessary es lock overhead in the more common inline case.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210819144927.25163-2-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a bug in how we update i_disksize, and the error path in
inline_data_end. Finally, drop an unnecessary creation of a journal
handle which was only needed for inline data, which can give us a
large performance gain in delayed allocation writes.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we factor out the inline data write procedure from
ext4_da_write_end(), we don't need to start journal handle for the cases
of both buffer overwrite and append-write. If we need to update
i_disksize, mark_inode_dirty() do start handle and update inode buffer.
So we could just remove all the journal handle codes in the delalloc
write procedure.
After this patch, we could get a lot of performance improvement. Below
is the Unixbench comparison data test on my machine with 'Intel Xeon
Gold 5120' CPU and nvme SSD backend.
Test cmd:
./Run -c 56 -i 3 fstime fsbuffer fsdisk
Before this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1
File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0
======
System Benchmarks Index Score (Partial Only) 1186.6
After this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3
File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7
======
System Benchmarks Index Score (Partial Only) 2053.0
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-5-yi.zhang@huawei.com
Now that the inline_data file write end procedure are falled into the
common write end functions, it is not clear. Factor them out and do
some cleanup. This patch also drop ext4_da_write_inline_data_end()
and switch to use ext4_write_inline_data_end() instead because we also
need to do the same error processing if we failed to write data into
inline entry.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-4-yi.zhang@huawei.com
Current error path of ext4_write_inline_data_end() is not correct.
Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com
After commit 3da40c7b08 ("ext4: only call ext4_truncate when size <=
isize"), i_disksize could always be updated to i_size in ext4_setattr(),
and we could sure that i_disksize <= i_size since holding inode lock and
if i_disksize < i_size there are delalloc writes pending in the range
upto i_size. If the end of the current write is <= i_size, there's no
need to touch i_disksize since writeback will push i_disksize upto
i_size eventually. So we can switch to check i_size instead of
i_disksize in ext4_da_write_end() when write to the end of the file.
we also could remove ext4_mark_inode_dirty() together because we defer
inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmEw5gEACgkQ8vlZVpUN
gaMatgf9GKc2H3JUDGJVXrOE1EZWXzyDI+Tv6zt0iTr05zi1ahjGccAbmJXiAwxU
Zy5TGr53CpPcGUG+sO4NpVzcH8q7cQeG0pVx9OnzJUdVfmv+htoNE0aAqUY5L3vg
AxV4KPGgxPofRQa3QRE2LDFHIkNs7c0ncprdaAtxNztd09iFo7bIayt614mARK++
HIO7VOGrH5Wya8SSoqYHmlO0g5viy3ypP6CpysIQw0JifSlHYkmYBUJ0/hwPV/Xl
WfzmwQ9p43C9EXVmIN4++l674TDzkSn9ebITXOgkq4C8KjnFgyhKQIj5QVj81MvH
dac5jxsuLTXTLYnRpAQ/duV4jRd+Fw==
=+NN7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to some ext4 bug fixes and cleanups, this cycle we add the
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make the updating inode data procedure atomic
ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
ext4: move inode eio simulation behind io completeion
ext4: Improve scalability of ext4 orphan file handling
ext4: Orphan file documentation
ext4: Speedup ext4 orphan inode handling
ext4: Move orphan inode handling into a separate file
ext4: Support for checksumming from journal triggers
ext4: fix race writing to an inline_data file while its xattrs are changing
jbd2: add sparse annotations for add_transaction_credits()
ext4: fix sparse warnings
ext4: Make sure quota files are not grabbed accidentally
ext4: fix e2fsprogs checksum failure for mounted filesystem
ext4: if zeroout fails fall back to splitting the extent node
ext4: reduce arguments of ext4_fc_add_dentry_tlv
ext4: flush background discard kwork when retry allocation
ext4: get discard out of jbd2 commit kthread contex
ext4: remove the repeated comment of ext4_trim_all_free
ext4: add new helper interface ext4_try_to_trim_range()
ext4: remove the 'group' parameter of ext4_trim_extent
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYTDKKAAKCRDh3BK/laaZ
PG9PAQCUF0fdBlCKudwSEt5PV5xemycL9OCAlYCd7d4XbBIe9wEA6sVJL9J+OwV2
aF0NomiXtJccE+S9+byjVCyqSzQJGQQ=
=6L2Y
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Copy up immutable/append/sync/noatime attributes (Amir Goldstein)
- Improve performance by enabling RCU lookup.
- Misc fixes and improvements
The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument. The ->get_acl() API was updated based on
comments from Al and Linus:
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/
* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: enable RCU'd ->get_acl()
vfs: add rcu argument to ->get_acl() callback
ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
ovl: use kvalloc in xattr copy-up
ovl: update ctime when changing fileattr
ovl: skip checking lower file's i_writecount on truncate
ovl: relax lookup error on mismatch origin ftype
ovl: do not set overlay.opaque for new directories
ovl: add ovl_allow_offline_changes() helper
ovl: disable decoding null uuid with redirect_dir
ovl: consistent behavior for immutable/append-only inodes
ovl: copy up sync/noatime fileattr flags
ovl: pass ovl_fs to ovl_check_setxattr()
fs: add generic helper for filling statx attribute flags
If the call to ext4_map_blocks() fails due to an corrupted file
system, ext4_ext_replay_set_iblocks() can get stuck in an infinite
loop. This could be reproduced by running generic/526 with a file
system that has inline_data and fast_commit enabled. The system will
repeatedly log to the console:
EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076
and the stack that it gets stuck in is:
ext4_block_to_path+0xe3/0x130
ext4_ind_map_blocks+0x93/0x690
ext4_map_blocks+0x100/0x660
skip_hole+0x47/0x70
ext4_ext_replay_set_iblocks+0x223/0x440
ext4_fc_replay_inode+0x29e/0x3b0
ext4_fc_replay+0x278/0x550
do_one_pass+0x646/0xc10
jbd2_journal_recover+0x14a/0x270
jbd2_journal_load+0xc4/0x150
ext4_load_journal+0x1f3/0x490
ext4_fill_super+0x22d4/0x2c00
With this patch, generic/526 still fails, but system is no longer
locking up in a tight loop. It's likely the root casue is that
fast_commit replay is corrupting file systems with inline_data, and we
probably need to add better error handling in the fast commit replay
code path beyond what is done here, which essentially just breaks the
infinite loop without reporting the to the higher levels of the code.
Fixes: 8016E29F4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Cc: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some small fixes and cleanups for fs/crypto/:
- Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
st_size for encrypted symlinks.
- Use base64url instead of a custom Base64 variant.
- Document struct fscrypt_operations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYS0HzhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+XZAQDfvDE9gK4Ii2uE4Jb5XYv4M/BnVhoR
WIhNEoHROIGv+AEAtyfmeCMdpPobkWHFfAE1iBysl3iS56fibQhi2wqyuQI=
=s6Wi
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Some small fixes and cleanups for fs/crypto/:
- Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
st_size for encrypted symlinks
- Use base64url instead of a custom Base64 variant
- Document struct fscrypt_operations"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: document struct fscrypt_operations
fscrypt: align Base64 encoding with RFC 4648 base64url
fscrypt: remove mention of symlink st_size quirk from documentation
ubifs: report correct st_size for encrypted symlinks
f2fs: report correct st_size for encrypted symlinks
ext4: report correct st_size for encrypted symlinks
fscrypt: add fscrypt_symlink_getattr() for computing st_size
Now that ext4_do_update_inode() return error before filling the whole
inode data if we fail to set inode blocks in ext4_inode_blocks_set().
This error should never happen in theory since sb->s_maxbytes should not
have allowed this, we have already init sb->s_maxbytes according to this
feature in ext4_fill_super(). So even through that could only happen due
to the filesystem corruption, we'd better to return after we finish
updating the inode because it may left an uninitialized buffer and we
could read this buffer later in "errors=continue" mode.
This patch make the updating inode data procedure atomic, call
EXT4_ERROR_INODE() after we dropping i_raw_lock after something bad
happened, make sure that the inode is integrated, and also drop a BUG_ON
and do some small cleanups.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "if (!buffer_uptodate(bh))" hunk covered almost the whole code after
getting buffer in __ext4_get_inode_loc() which seems unnecessary, remove
it and switch to check ext4_buffer_uptodate(), it simplify code and make
it more readable.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No EIO simulation is required if the buffer is uptodate, so move the
simulation behind read bio completeion just like inode/block bitmap
simulation does.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Even though the length of the critical section when adding / removing
orphaned inodes was significantly reduced by using orphan file, the
contention of lock protecting orphan file still appears high in profiles
for truncate / unlink intensive workloads with high number of threads.
This patch makes handling of orphan file completely lockless. Also to
reduce conflicts between CPUs different CPUs start searching for empty
slot in orphan file in different blocks.
Performance comparison of locked orphan file handling, lockless orphan
file handling, and completely disabled orphan inode handling
from 80 CPU Xeon Server with 526 GB of RAM, filesystem located on
SAS SSD disk, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Threads Time Time Time
Orphan locked Orphan lockless No orphan
1 0.945600 0.939400 0.891200
2 1.331800 1.246600 1.174400
4 1.995000 1.780600 1.713200
8 6.424200 4.900000 4.106000
16 14.937600 8.516400 8.138000
32 33.038200 24.565600 24.002200
64 60.823600 39.844600 38.440200
128 122.941400 70.950400 69.315000
So we can see that with lockless orphan file handling, addition /
deletion of orphaned inodes got almost completely out of picture even
for a microbenchmark stressing it.
For reaim creat_clo workload on ramdisk there are also noticeable gains
(average of 5 runs):
Clients Vanilla (ops/s) Patched (ops/s)
creat_clo-1 14705.88 ( 0.00%) 14354.07 * -2.39%*
creat_clo-3 27108.43 ( 0.00%) 28301.89 ( 4.40%)
creat_clo-5 37406.48 ( 0.00%) 45180.73 * 20.78%*
creat_clo-7 41338.58 ( 0.00%) 54687.50 * 32.29%*
creat_clo-9 45226.13 ( 0.00%) 62937.07 * 39.16%*
creat_clo-11 44000.00 ( 0.00%) 65088.76 * 47.93%*
creat_clo-13 36516.85 ( 0.00%) 68661.97 * 88.03%*
creat_clo-15 30864.20 ( 0.00%) 69551.78 * 125.35%*
creat_clo-17 27478.45 ( 0.00%) 67729.08 * 146.48%*
creat_clo-19 25000.00 ( 0.00%) 61621.62 * 146.49%*
creat_clo-21 18772.35 ( 0.00%) 63829.79 * 240.02%*
creat_clo-23 16698.94 ( 0.00%) 61938.96 * 270.92%*
creat_clo-25 14973.05 ( 0.00%) 56947.61 * 280.33%*
creat_clo-27 16436.69 ( 0.00%) 65008.03 * 295.51%*
creat_clo-29 13949.01 ( 0.00%) 69047.62 * 395.00%*
creat_clo-31 14283.52 ( 0.00%) 67982.45 * 375.95%*
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 orphan inode handling is a bottleneck for workloads which heavily
truncate / unlink small files since it contends on the global
s_orphan_mutex lock (and generally it's difficult to improve scalability
of the ondisk linked list of orphaned inodes).
This patch implements new way of handling orphan inodes. Instead of
linking orphaned inode into a linked list, we store it's inode number in
a new special file which we call "orphan file". Only if there's no more
space in the orphan file (too many inodes are currently orphaned) we
fall back to using old style linked list. Currently we protect
operations in the orphan file with a spinlock for simplicity but even in
this setting we can substantially reduce the length of the critical
section and thus speedup some workloads. In the next patch we improve
this by making orphan handling lockless.
Note that the change is backwards compatible when the filesystem is
clean - the existence of the orphan file is a compat feature, we set
another ro-compat feature indicating orphan file needs scanning for
orphaned inodes when mounting filesystem read-write. This ro-compat
feature gets cleared on unmount / remount read-only.
Some performance data from 80 CPU Xeon Server with 512 GB of RAM,
filesystem located on SSD, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Threads Time Time
Vanilla Patched
1 1.057200 0.945600
2 1.680400 1.331800
4 2.547000 1.995000
8 7.049400 6.424200
16 14.827800 14.937600
32 40.948200 33.038200
64 87.787400 60.823600
128 206.504000 122.941400
So we can see significant wins all over the board.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move functions for handling orphan inodes into a new file
fs/ext4/orphan.c to have them in one place and somewhat reduce size of
other files. No code changes.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add sparse annotations to suppress false positive context imbalance
warnings, and use NULL instead of 0 in EXT_MAX_{EXTENT,INDEX}.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The location of the system.data extended attribute can change whenever
xattr_sem is not taken. So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().
This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.
Cc: stable@kernel.org
Fixes: f19d5870cb ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4 filesystem is corrupted so that quota files are linked from
directory hirerarchy, bad things can happen. E.g. quota files can get
corrupted or deleted. Make sure we are not grabbing quota file inodes
when we expect normal inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812133122.26360-1-jack@suse.cz
Commit 81414b4dd4 ("ext4: remove redundant sb checksum
recomputation") removed checksum recalculation after updating
superblock free space / inode counters in ext4_fill_super() based on
the fact that we will recalculate the checksum on superblock
writeout.
That is correct assumption but until the writeout happens (which can
take a long time) the checksum is incorrect in the buffer cache and if
programs such as tune2fs or resize2fs is called shortly after a file
system is mounted can fail. So return back the checksum recalculation
and add a comment explaining why.
Fixes: 81414b4dd4 ("ext4: remove redundant sb checksum recomputation")
Cc: stable@kernel.org
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812124737.21981-1-jack@suse.cz
If the underlying storage device is using thin-provisioning, it's
possible for a zeroout operation to return ENOSPC.
Commit df22291ff0 ("ext4: Retry block allocation if we have free blocks
left") added logic to retry block allocation since we might get free block
after we commit a transaction. But the ENOSPC from thin-provisioning
will confuse ext4, and lead to an infinite loop.
Since using zeroout instead of splitting the extent node is an
optimization, if it fails, we might as well fall back to splitting the
extent node.
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Let's pass fc_dentry directly since those arguments (tag, parent_ino and
ino etc) can be deferenced from it.
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210727080708.3708814-1-guoqing.jiang@linux.dev
The background discard kwork tries to mark blocks used and issue
discard. This can make filesystem suffer from NOSPC error, xfstest
generic/371 can fail due to it. Fix it by flushing discard kwork
in ext4_should_retry_alloc. At the same time, give up discard at
the moment.
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-6-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, discard is issued and waited to be completed in jbd2
commit kthread context after the logs are committed. When large
amount of files are deleted and discard is flooding, jbd2 commit
kthread can be blocked for long time. Then all of the metadata
operations can be blocked to wait the log space.
One case is the page fault path with read mm->mmap_sem held, which
wants to update the file time but has to wait for the log space.
When other threads in the task wants to do mmap, then write mmap_sem
is blocked. Finally all of the following read mmap_sem requirements
are blocked, even the ps command which need to read the /proc/pid/
-cmdline. Our monitor service which needs to read /proc/pid/cmdline
used to be blocked for 5 mins.
This patch frees the blocks back to buddy after commit and then do
discard in a async kworker context in fstrim fashion, namely,
- mark blocks to be discarded as used if they have not been allocated
- do discard
- mark them free
After this, jbd2 commit kthread won't be blocked any more by discard
and we won't get NOSPC even if the discard is slow or throttled.
Link: https://marc.info/?l=linux-kernel&m=162143690731901&w=2
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-5-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmTZcACgkQnJ2qBz9k
QNkkmAgArW6XoF1CePds/ZaC9vfg/nk66/zVo0n+J8xXjMWAPxcKbWFfV0uWVixq
yk4lcLV47a2Mu/B/1oLNd3vrSmhwU+srWqNwOFn1nv+lP/6wJqr8oztRHn/0L9Q3
ZSRrukSejbQ6AvTL/WzTNnCjjCc2ne3Kyko6W41aU6uyJuzhSM32wbx7qlV6t54Z
iint9OrB4gM0avLohNafTUq6I+tEGzBMNwpCG/tqCmkcvDcv3rTDVAnPSCTm0Tx2
hdrYDcY/rLxo93pDBaW1rYA/fohR+mIVye6k2TjkPAL6T1x+rxeT5qnc+YijH5yF
sFPDhlD+ZsfOLi8stWXLOJ+8+gLODg==
=pDBR
-----END PGP SIGNATURE-----
Merge tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs hole punching vs cache filling race fixes from Jan Kara:
"Fix races leading to possible data corruption or stale data exposure
in multiple filesystems when hole punching races with operations such
as readahead.
This is the series I was sending for the last merge window but with
your objection fixed - now filemap_fault() has been modified to take
invalidate_lock only when we need to create new page in the page cache
and / or bring it uptodate"
* tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
filesystems/locking: fix Malformed table warning
cifs: Fix race between hole punch and page fault
ceph: Fix race between hole punch and page fault
fuse: Convert to using invalidate_lock
f2fs: Convert to using invalidate_lock
zonefs: Convert to using invalidate_lock
xfs: Convert double locking of MMAPLOCK to use VFS helpers
xfs: Convert to use invalidate_lock
xfs: Refactor xfs_isilocked()
ext2: Convert to using invalidate_lock
ext4: Convert to use mapping->invalidate_lock
mm: Add functions to lock invalidate_lock for two mappings
mm: Protect operations adding pages to page cache with invalidate_lock
documentation: Sync file_operations members with reality
mm: Fix comments mentioning i_mutex
All callers already have a dax_device obtained from fs_dax_get_by_bdev
at hand, so just pass that to dax_supported() insted of doing another
lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20210826135510.6293-10-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a rcu argument to the ->get_acl() callback to allow
get_cached_acl_rcu() to call the ->get_acl() method in the next patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is no functional change in this patch but just split the
codes, which serachs free block and does trim, into a new function
ext4_try_to_trim_range. This is preparing for the following async
backgroup discard.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-3-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Get rid of the 'group' parameter of ext4_trim_extent as we can get
it from the 'e4b'.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-2-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit b5776e7524 ("ext4: fix potential htree index checksum
corruption) removed a required restart when multiple levels of index
nodes need to be split. Fix this to avoid directory htree corruptions
when using the large_dir feature.
Cc: stable@kernel.org # v5.11
Cc: Благодаренко Артём <artem.blagodarenko@gmail.com>
Fixes: b5776e7524 ("ext4: fix potential htree index checksum corruption)
Reported-by: Denis <denis@voxelsoft.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.
Fix this by calling fscrypt_symlink_getattr() after ext4_getattr() for
encrypted symlinks. This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).
For more details, see the commit which added fscrypt_symlink_getattr().
Fixes: f348c25232 ("ext4 crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
We do a bforget and return for no journal case, so let's remove this
conflict comment.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Link: https://lore.kernel.org/r/20210714055940.1553705-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
if (!ext4_has_feature_mmp(sb)) then retval can be unitialized before
we jump to the wait_to_exit label.
Fixes: 61bb4a1c41 ("ext4: fix possible UAF when remounting r/o a mmp-protected file system")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210713022728.2533770-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert ext4 to use mapping->invalidate_lock instead of its private
EXT4_I(inode)->i_mmap_sem. This is mostly search-and-replace. By this
conversion we fix a long standing race between hole punching and read(2)
/ readahead(2) paths that can lead to stale page cache contents.
CC: <linux-ext4@vger.kernel.org>
CC: Ted Tso <tytso@mit.edu>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmDnU2AACgkQ8vlZVpUN
gaOBIAgApIAIeGbppf7aFjRN4h4wxfRpr7w6lux3GVmz7D+6djRi21X5dT5xq01m
u6DkLAcKrCATIidyP6qHlvBbxxcPt2PX1FcQbruj9WcnSng1Ngl7RW8BEqp/eIRo
Nb7MY0pg8HIJVMEniWQcdEjFWKDL3ksWR9+X3V3nhSzp+0kXFF1ySjk+TWi/ZGSn
T/Q1sEyeUOiVfV75cIW5JbKoJEgvCvrclFvGJLYVcIAYeqJfQKQ0+tlkhDeYnWfQ
nZgh1UU350bO629LGIhbRAkLbAloEb0d57mOQCrATo0JFrAZ52+0ZCkrTXtIyoOF
TUILVf3zsqgdO8HLDkbH1G+lGn9WOA==
=qU+W
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Ext4 regression and bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: inline jbd2_journal_[un]register_shrinker()
ext4: fix flags validity checking for EXT4_IOC_CHECKPOINT
ext4: fix possible UAF when remounting r/o a mmp-protected file system
ext4: use ext4_grp_locked_error in mb_find_extent
ext4: fix WARN_ON_ONCE(!buffer_uptodate) after an error writing the superblock
Revert "ext4: consolidate checks for resize of bigalloc into ext4_resize_begin"
The function jbd2_journal_unregister_shrinker() was getting called
twice when the file system was getting unmounted. On Power and ARM
platforms this was causing kernel crash when unmounting the file
system, when a percpu_counter was destroyed twice.
Fix this by removing jbd2_journal_[un]register_shrinker() functions,
and inlining the shrinker setup and teardown into
journal_init_common() and jbd2_journal_destroy(). This means that
ext4 and ocfs2 now no longer need to know about registering and
unregistering jbd2's shrinker.
Also, while we're at it, rename the percpu counter from
j_jh_shrink_count to j_checkpoint_jh_count, since this makes it
clearer what this counter is intended to track.
Link: https://lore.kernel.org/r/20210705145025.3363130-1-tytso@mit.edu
Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 618f003199 ("ext4: fix memory leak in
ext4_fill_super"), after the file system is remounted read-only, there
is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to
point at freed memory, which the call to ext4_stop_mmpd() can trip
over.
Fix this by only allowing kmmpd() to exit when it is stopped via
ext4_stop_mmpd().
Link: https://lore.kernel.org/r/20210707002433.3719773-1-tytso@mit.edu
Reported-by: Ye Bin <yebin10@huawei.com>
Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Commit 5d1b1b3f49 ("ext4: fix BUG when calling ext4_error with locked
block group") introduces ext4_grp_locked_error to handle unlocking a
group in error cases. Otherwise, there is a possibility of a sleep while
atomic. However, since 43c73221b3 ("ext4: replace BUG_ON with WARN_ON
in mb_find_extent()"), mb_find_extent() has contained a ext4_error()
call while a group spinlock is held. Replace this with
ext4_grp_locked_error.
Fixes: 43c73221b3 ("ext4: replace BUG_ON with WARN_ON in mb_find_extent()")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20210623232114.34457-1-stephen.s.brennan@oracle.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a writeback of the superblock fails with an I/O error, the buffer
is marked not uptodate. However, this can cause a WARN_ON to trigger
when we attempt to write superblock a second time. (Which might
succeed this time, for cerrtain types of block devices such as iSCSI
devices over a flaky network.)
Try to detect this case in flush_stashed_error_work(), and also change
__ext4_handle_dirty_metadata() so we always set the uptodate flag, not
just in the nojournal case.
Before this commit, this problem can be repliciated via:
1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096'
2. mount /dev/mapper/dust1 /home/test
3. dmsetup message dust1 0 addbadblock 0 10
4. cd /home/test
5. echo "XXXXXXX" > t
After a few seconds, we got following warning:
[ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0
[ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write
[ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata
[ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0
[ 91.417038] ------------[ cut here ]------------
[ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e
[ 91.440322] Call Trace:
[ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220
[ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90
[ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0
[ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240
[ 91.443336] ? put_prev_entity+0x2a/0x200
[ 91.443856] ? kjournald2+0x12e/0x510
[ 91.444324] kjournald2+0x12e/0x510
[ 91.444773] ? woken_wake_function+0x30/0x30
[ 91.445326] kthread+0x150/0x1b0
[ 91.445739] ? commit_timeout+0x20/0x20
[ 91.446258] ? kthread_flush_worker+0xb0/0xb0
[ 91.446818] ret_from_fork+0x1f/0x30
[ 91.447293] ---[ end trace 66f0b6bf3d1abade ]---
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 in 5.14:
- Allow applications to poll on changes to /sys/fs/ext4/*/errors_count
- Add the ioctl EXT4_IOC_CHECKPOINT which allows the journal to be
checkpointed, truncated and discarded or zero'ed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmDcjRgACgkQ8vlZVpUN
gaMAMQgAjRYUQ+tdJVZzInFwukudhgLyuCP9AdCx76fisaH22yNCakQ7M2XGz59i
/YbJerLaueYpHZzpA9p5+sSjVhMwILO3scBSJbOwdsbrFAsFLzcgQKQhGGqK2KvX
IAOEArC8/hm1wnVb7sfQYdBHlWyeJpI8hd/8WZPlYtySlRnP1TZCd+X7y7lmNs1H
QU1KECwstI2t8Lug0QeKx2B9PI9AWcCs0lTJ4LfcANZAh3HIJi9aUCk4SFDRkf3/
8AazvMqTHJD9yc+BNyZOro2ykDFCStkNqf0cDYTzvKrr66CHScPUtyI0oAEdspxN
+SNNARPGZgNOuR3ZRbGivtwgEB+GpQ==
=jSd4
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to bug fixes and cleanups, there are two new features for
ext4 in 5.14:
- Allow applications to poll on changes to
/sys/fs/ext4/*/errors_count
- Add the ioctl EXT4_IOC_CHECKPOINT which allows the journal to be
checkpointed, truncated and discarded or zero'ed"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
jbd2: export jbd2_journal_[un]register_shrinker()
ext4: notify sysfs on errors_count value change
fs: remove bdev_try_to_free_page callback
ext4: remove bdev_try_to_free_page() callback
jbd2: simplify journal_clean_one_cp_list()
jbd2,ext4: add a shrinker to release checkpointed buffers
jbd2: remove redundant buffer io error checks
jbd2: don't abort the journal when freeing buffers
jbd2: ensure abort the journal if detect IO error when writing original buffer back
jbd2: remove the out label in __jbd2_journal_remove_checkpoint()
ext4: no need to verify new add extent block
jbd2: clean up misleading comments for jbd2_fc_release_bufs
ext4: add check to prevent attempting to resize an fs with sparse_super2
ext4: consolidate checks for resize of bigalloc into ext4_resize_begin
ext4: remove duplicate definition of ext4_xattr_ibody_inline_set()
ext4: fsmap: fix the block/inode bitmap comment
ext4: fix comment for s_hash_unsigned
ext4: use local variable ei instead of EXT4_I() macro
ext4: fix avefreec in find_group_orlov
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
...
The function ext4_resize_begin() gets called from three different
places, and online resize for bigalloc file systems is disallowed from
the old-style online resize (EXT4_IOC_GROUP_ADD and
EXT4_IOC_GROUP_EXTEND), but it *is* supposed to be allowed via
EXT4_IOC_RESIZE_FS.
This reverts commit e9f9f61d0c.
After s_error_count is incremented, signal the change in the
corresponding sysfs attribute via sysfs_notify. This allows userspace to
poll() on changes to /sys/fs/ext4/*/errors_count.
[ Moved call of ext4_notify_error_sysfs() to flush_stashed_error_work()
to avoid BUG's caused by calling sysfs_notify trying to sleep after
being called from an invalid context. -- TYT ]
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Link: https://lore.kernel.org/r/20210611140209.28903-1-jonathan.davies@nutanix.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use __set_page_dirty_no_writeback() instead. This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future. It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.
[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]
Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After we introduce a jbd2 shrinker to release checkpointed buffer's
journal head, we could free buffer without bdev_try_to_free_page()
under memory pressure. So this patch remove the whole
bdev_try_to_free_page() callback directly. It also remove many
use-after-free issues relate to it together.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-8-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current metadata buffer release logic in bdev_try_to_free_page() have
a lot of use-after-free issues when umount filesystem concurrently, and
it is difficult to fix directly because ext4 is the only user of
s_op->bdev_try_to_free_page callback and we may have to add more special
refcount or lock that is only used by ext4 into the common vfs layer,
which is unacceptable.
One better solution is remove the bdev_try_to_free_page callback, but
the real problem is we cannot easily release journal_head on the
checkpointed buffer, so try_to_free_buffers() cannot release buffers and
page under memory pressure, which is more likely to trigger
out-of-memory. So we cannot remove the callback directly before we find
another way to release journal_head.
This patch introduce a shrinker to free journal_head on the checkpointed
transaction. After the journal_head got freed, try_to_free_buffers()
could free buffer properly.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_ext_grow_indepth will add a new extent block which has init the
expected content. We can mark this buffer as verified so to stop a
useless check in __read_extent_tree_block.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210609075545.1442160-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The in-kernel ext4 resize code doesn't support filesystem with the
sparse_super2 feature. It fails with errors like this and doesn't finish
the resize:
EXT4-fs (loop0): resizing filesystem from 16640 to 7864320 blocks
EXT4-fs warning (device loop0): verify_reserved_gdb:760: reserved GDT 2 missing grp 1 (32770)
EXT4-fs warning (device loop0): ext4_resize_fs:2111: error (-22) occurred during file system resize
EXT4-fs (loop0): resized filesystem to 2097152
To reproduce:
mkfs.ext4 -b 4096 -I 256 -J size=32 -E resize=$((256*1024*1024)) -O sparse_super2 ext4.img 65M
truncate -s 30G ext4.img
mount ext4.img /mnt
python3 -c 'import fcntl, os, struct ; fd = os.open("/mnt", os.O_RDONLY | os.O_DIRECTORY) ; fcntl.ioctl(fd, 0x40086610, struct.pack("Q", 30 * 1024 * 1024 * 1024 // 4096), False) ; os.close(fd)'
dmesg | tail
e2fsck ext4.img
The userspace resize2fs tool has a check for this case: it checks if the
filesystem has sparse_super2 set and if the kernel provides
/sys/fs/ext4/features/sparse_super2. However, the former check requires
manually reading and parsing the filesystem superblock.
Detect this case in ext4_resize_begin and error out early with a clear
error message.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/74b8ae78405270211943cd7393e65586c5faeed1.1623093259.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_xattr_ibody_inline_set() & ext4_xattr_ibody_set() have the exact
same definition. Hence remove ext4_xattr_ibody_inline_set() and all
its call references. Convert the callers of it to call
ext4_xattr_ibody_set() instead.
[ Modified to preserve ext4_xattr_ibody_set() and remove
ext4_xattr_ibody_inline_set() instead. -- TYT ]
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/fd566b799bbbbe9b668eb5eecde5b5e319e3694f.1622685482.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The cache_cnt parameter of tracepoint ext4_es_shrink_exit means the
remaining cache count after shrink, but now it is the cache count before
shrink, fix it by read sbi->s_extent_cache_cnt again.
Fixes: 1ab6c4997e ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After converting fs shrinkers to new scan/count API, we are no longer
pass zero nr_to_scan parameter to detect the number of objects to free,
just remove this check.
Fixes: 1ab6c4997e ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the ext4_dx_add_entry function, the at variable is assigned but will
reset just after “again:” label. So delete the unnecessary assignment.
this will not chang the logic.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@gmail.com>
Link: https://lore.kernel.org/r/1621493752-36890-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ioctl EXT4_IOC_CHECKPOINT checkpoints and flushes the journal. This
includes forcing all the transactions to the log, checkpointing the
transactions, and flushing the log to disk. This ioctl takes u32 "flags"
as an argument. Three flags are supported. EXT4_IOC_CHECKPOINT_FLAG_DRY_RUN
can be used to verify input to the ioctl. It returns error if there is any
invalid input, otherwise it returns success without performing
any checkpointing. The other two flags, EXT4_IOC_CHECKPOINT_FLAG_DISCARD
and EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT, can be used to issue requests to
discard or zeroout the journal logs blocks, respectively. At this
point, EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT is primarily added to enable
testing of this codepath on devices that don't support discard.
EXT4_IOC_CHECKPOINT_FLAG_DISCARD and EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT
cannot both be set.
Systems that wish to achieve content deletion SLO can set up a daemon
that calls this ioctl at a regular interval such that it matches with the
SLO requirement. Thus, with this patch, the ext4_dir_entry2 wipeout
patch[1], and the Ext4 "-o discard" mount option set, Ext4 can now
guarantee that all file contents, file metatdata, and filenames will not
be accessible through the filesystem and will have had discard or
zeroout requests issued for corresponding device blocks.
The __jbd2_journal_erase function could also be used to discard or
zero-fill the journal during journal load after recovery. This would
provide a potential solution to a journal replay bug reported earlier this
year[2]. After a successful journal recovery, e2fsck can call this ioctl to
discard the journal as well.
[1] https://lore.kernel.org/linux-ext4/YIHknqxngB1sUdie@mit.edu/
[2] https://lore.kernel.org/linux-ext4/YDZoaacIYStFQT8g@mit.edu/
Link: https://lore.kernel.org/r/20210518151327.130198-2-leah.rumancik@gmail.com
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a flags argument to jbd2_journal_flush to enable discarding or
zero-filling the journal blocks while flushing the journal.
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Link: https://lore.kernel.org/r/20210518151327.130198-1-leah.rumancik@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit c89128a008 ("ext4: handle errors on
ext4_commit_super"), 'ret' may be set to 0 before calling
ext4_fill_flex_info(), if ext4_fill_flex_info() fails ext4_mount()
doesn't return error code, it makes 'root' is null which causes crash
in legacy_get_tree().
Fixes: c89128a008 ("ext4: handle errors on ext4_commit_super")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210510111051.55650-1-yangyingliang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_orphan_cleanup(), if ext4_truncate() failed to get a transaction
handle, it didn't remove the inode from the in-core orphan list, which
may probably trigger below error dump in ext4_destroy_inode() during the
final iput() and could lead to memory corruption on the later orphan
list changes.
EXT4-fs (sda): Inode 6291467 (00000000b8247c67): orphan list check failed!
00000000b8247c67: 0001f30a 00000004 00000000 00000023 ............#...
00000000e24cde71: 00000006 014082a3 00000000 00000000 ......@.........
0000000072c6a5ee: 00000000 00000000 00000000 00000000 ................
...
This patch fix this by cleanup in-core orphan list manually if
ext4_truncate() return error.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210507071904.160808-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
static int kthread(void *_create) will return -ENOMEM
or -EINTR in case of internal failure or
kthread_stop() call happens before threadfn call.
To prevent fancy error checking and make code
more straightforward we moved all cleanup code out
of kmmpd threadfn.
Also, dropped struct mmpd_data at all. Now struct super_block
is a threadfn data and struct buffer_head embedded into
struct ext4_sb_info.
Reported-by: syzbot+d9e482e303930fa4f6ff@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210430185046.15742-1-paskripkin@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variable error is set to zero but this value is never read as it's not
used later on, hence it is a redundant assignment and can be removed.
Cleans up the following clang-analyzer warning:
fs/ext4/ioctl.c:657:3: warning: Value stored to 'error' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619691409-83160-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now set_buffer_uptodate() will test first and then set, so we don't have
to check buffer_uptodate() first, remove it to simplify code.
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619418587-5580-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A code in iomap alloc may overflow block number when converting it to
byte offset. Luckily this is mostly harmless as we will just use more
expensive method of writing using unwritten extents even though we are
writing beyond i_size.
Cc: stable@kernel.org
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210412102333.2676-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmC82AQACgkQ8vlZVpUN
gaOkAgf+KH57P/P0sB6aVBHpAzqa9jTKJWMA5kpCqYUDkYlfF7n2hwsjMzWpJ5MY
ZvFpKAflmRnve/ULUZQX6+zrcbieNs3e+6VFZrZ0PmxN0dupyISLY7jnvCRDleA7
BFO34AcH+QEst9zXJmgta9eoy3LA8sawhQ/d7ujVY+IRFk40m26fuAMiaGznlQJ5
dmrx7pHZWKFIDFIg2TdFlP+Voqbxs2VTT16gmWpGBdTyWYHKjbSOLKJFc9DwYeE9
aANf6iIzwXz7y9pZiOnTrGuKDEJcIZNESkbIqw62YgqsoObLbsbCZNmNcqxyHpYQ
Mh3L59KtmjANW3iOxQfyxkNTugxchw==
=BSnf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Only advertise encrypted_casefold when encryption and unicode are enabled
ext4: fix no-key deletion for encrypt+casefold
ext4: fix memory leak in ext4_fill_super
ext4: fix fast commit alignment issues
ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed
ext4: fix accessing uninit percpu counter variable with fast_commit
ext4: fix memory leak in ext4_mb_init_backend on error path.
commit 471fbbea7f ("ext4: handle casefolding with encryption") is
missing a few checks for the encryption key which are needed to
support deleting enrypted casefolded files when the key is not
present.
This bug made it impossible to delete encrypted+casefolded directories
without the encryption key, due to errors like:
W : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key
Repro steps in kvm-xfstests test appliance:
mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc
mount /vdc
mkdir /vdc/dir
chattr +F /vdc/dir
keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}')
xfs_io -c "set_encpolicy $keyid" /vdc/dir
for i in `seq 1 100`; do
mkdir /vdc/dir/$i
done
xfs_io -c "rm_enckey $keyid" /vdc
rm -rf /vdc/dir # fails with the bug
Fixes: 471fbbea7f ("ext4: handle casefolding with encryption")
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.
If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.
This can easily be reproduced by calling an infinite loop of:
systemctl start <ext4_on_lvm>.mount, and
systemctl stop <ext4_on_lvm>.mount
... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed.
Fixes: ce40733ce9 ("ext4: Check for return value from sb_set_blocksize")
Fixes: ac27a0ec11 ("ext4: initial copy of files from ext3")
Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.com
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Fast commit recovery data on disk may not be aligned. So, when the
recovery code reads it, this patch makes sure that fast commit info
found on-disk is first memcpy-ed into an aligned variable before
accessing it. As a consequence of it, we also remove some macros that
could resulted in unaligned accesses.
Cc: stable@kernel.org
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975] ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368] ext4_find_extent+0x300/0x330 [ext4]
[130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995] ext4_readpage+0x54/0x100 [ext4]
[130747.337359] generic_file_buffered_read+0x410/0xae8
[130747.337767] generic_file_read_iter+0x114/0x190
[130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556] __vfs_read+0x11c/0x188
[130747.338851] vfs_read+0x94/0x150
[130747.339110] ksys_read+0x74/0xf0
This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable). Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When running generic/527 with fast_commit configuration, the following
issue is seen on Power. With fast_commit, during ext4_fc_replay()
(which can be called from ext4_fill_super()), if inode eviction
happens then it can access an uninitialized percpu counter variable.
This patch adds the check before accessing the counters in
ext4_free_inode() path.
[ 321.165371] run fstests generic/527 at 2021-04-29 08:38:43
[ 323.027786] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: block_validity. Quota mode: none.
[ 323.618772] BUG: Unable to handle kernel data access on read at 0x1fbd80000
[ 323.619767] Faulting instruction address: 0xc000000000bae78c
cpu 0x1: Vector: 300 (Data Access) at [c000000010706ef0]
pc: c000000000bae78c: percpu_counter_add_batch+0x3c/0x100
lr: c0000000006d0bb0: ext4_free_inode+0x780/0xb90
pid = 5593, comm = mount
ext4_free_inode+0x780/0xb90
ext4_evict_inode+0xa8c/0xc60
evict+0xfc/0x1e0
ext4_fc_replay+0xc50/0x20f0
do_one_pass+0xfe0/0x1350
jbd2_journal_recover+0x184/0x2e0
jbd2_journal_load+0x1c0/0x4a0
ext4_fill_super+0x2458/0x4200
mount_bdev+0x1dc/0x290
ext4_mount+0x28/0x40
legacy_get_tree+0x4c/0xa0
vfs_get_tree+0x4c/0x120
path_mount+0xcf8/0xd70
do_mount+0x80/0xd0
sys_mount+0x3fc/0x490
system_call_exception+0x384/0x3d0
system_call_common+0xec/0x278
Cc: stable@kernel.org
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/6cceb9a75c54bef8fa9696c1b08c8df5ff6169e2.1619692410.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
useful constants: struct qstr for ".."
hostfs_open(): don't open-code file_dentry()
whack-a-mole: kill strlen_user() (again)
autofs: should_expire() argument is guaranteed to be positive
apparmor:match_mn() - constify devpath argument
buffer: a small optimization in grow_buffers
get rid of autofs_getpath()
constify dentry argument of dentry_path()/dentry_path_raw()
casefold, ensure that deleted file names are cleared in directory
blocks by zeroing directory entries when they are unlinked or moved as
part of a hash tree node split. We also improve the block allocator's
performance on a freshly mounted file system by prefetching block
bitmaps.
There are also the usual cleanups and bug fixes, including fixing a
page cache invalidation race when there is mixed buffered and direct
I/O and the block size is less than page size, and allow the dax flag
to be set and cleared on inline directories.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmCLei4ACgkQ8vlZVpUN
gaPZkgf/VH08xjMf3VthC+BpvVmChQXfV4yjigHbO2pmPyYWZhyJzkEGCQD8u2eB
b7ShW+B1NCifcTU34xAkKHwEtakzzEv3WIMrT1oZNWrpfo8tt850EkwQggaGGDpd
/HnP1/wLtziJ5hE6DwutmX7qB4VFghVj898MjDrEPSOBqItOjWps9mn/JWL7SHyI
Dqzhf5XZTYPaXWuJmSmKw3q8O70JDHnZe/rRWlfX1jLI5KDtqp71Nw1B+gszUB66
IUdncyZKvInsyjYhkbCQ8U6WFih82MrbKeuGYDp/RFvg5eMELEYkwT9j0ofuDHq8
zn62sAlbOXv1DiqkPDHKVm9GkHx8/g==
=UpnH
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features for ext4 this cycle include support for encrypted
casefold, ensure that deleted file names are cleared in directory
blocks by zeroing directory entries when they are unlinked or moved as
part of a hash tree node split. We also improve the block allocator's
performance on a freshly mounted file system by prefetching block
bitmaps.
There are also the usual cleanups and bug fixes, including fixing a
page cache invalidation race when there is mixed buffered and direct
I/O and the block size is less than page size, and allow the dax flag
to be set and cleared on inline directories"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
ext4: wipe ext4_dir_entry2 upon file deletion
ext4: Fix occasional generic/418 failure
fs: fix reporting supported extra file attributes for statx()
ext4: allow the dax flag to be set and cleared on inline directories
ext4: fix debug format string warning
ext4: fix trailing whitespace
ext4: fix various seppling typos
ext4: fix error return code in ext4_fc_perform_commit()
ext4: annotate data race in jbd2_journal_dirty_metadata()
ext4: annotate data race in start_this_handle()
ext4: fix ext4_error_err save negative errno into superblock
ext4: fix error code in ext4_commit_super
ext4: always panic when errors=panic is specified
ext4: delete redundant uptodate check for buffer
ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
ext4: make prefetch_block_bitmaps default
ext4: add proc files to monitor new structures
ext4: improve cr 0 / cr 1 group scanning
ext4: add MB_NUM_ORDERS macro
ext4: add mballoc stats proc file
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmCJUfIACgkQnJ2qBz9k
QNkStAf8CA7beya7LZ/GGN7HzXhv2cs+IpUFhRkynLklEM0lxKsOEagLFSZxkoMD
IBSRSo4odkkderqI9W/yp+9OYhOd9+BQCq4isg1Gh9Tf5xANJEpLvBAPnWVhooJs
9CrYZQY9Bdf+fF/8GHbKlrMAYm56vBCmWqyWTEtWUyPBOA12in2ZHQJmCa+5+nge
zTT/B5cvuhN5K7uYhGM4YfeCU5DBmmvD4sV6YBTkQOgCU0bEF0f9R3JjHDo34a1s
yqna3ypqKNRhsJVs8F+aOGRieUYxFoRqtYNHZK3qI9i07v7ndoTm5jzGN6OFlKs3
U3rF9/+cBgeESahWG6IjHIqhXGXNhg==
=KjNm
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- support for limited fanotify functionality for unpriviledged users
- faster merging of fanotify events
- a few smaller fsnotify improvements
* tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
shmem: allow reporting fanotify events with file handles on tmpfs
fs: introduce a wrapper uuid_to_fsid()
fanotify_user: use upper_32_bits() to verify mask
fanotify: support limited functionality for unprivileged users
fanotify: configurable limits via sysfs
fanotify: limit number of event merge attempts
fsnotify: use hash table for faster events merge
fanotify: mix event info and pid into merge key hash
fanotify: reduce event objectid to 29-bit hash
fsnotify: allow fsnotify_{peek,remove}_first_event with empty queue
-----BEGIN PGP SIGNATURE-----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=tZgy
-----END PGP SIGNATURE-----
Merge tag 'netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull network filesystem helper library updates from David Howells:
"Here's a set of patches for 5.13 to begin the process of overhauling
the local caching API for network filesystems. This set consists of
two parts:
(1) Add a helper library to handle the new VM readahead interface.
This is intended to be used unconditionally by the filesystem
(whether or not caching is enabled) and provides a common
framework for doing caching, transparent huge pages and, in the
future, possibly fscrypt and read bandwidth maximisation. It also
allows the netfs and the cache to align, expand and slice up a
read request from the VM in various ways; the netfs need only
provide a function to read a stretch of data to the pagecache and
the helper takes care of the rest.
(2) Add an alternative fscache/cachfiles I/O API that uses the kiocb
facility to do async DIO to transfer data to/from the netfs's
pages, rather than using readpage with wait queue snooping on one
side and vfs_write() on the other. It also uses less memory, since
it doesn't do buffered I/O on the backing file.
Note that this uses SEEK_HOLE/SEEK_DATA to locate the data
available to be read from the cache. Whilst this is an improvement
from the bmap interface, it still has a problem with regard to a
modern extent-based filesystem inserting or removing bridging
blocks of zeros. Fixing that requires a much greater overhaul.
This is a step towards overhauling the fscache API. The change is
opt-in on the part of the network filesystem. A netfs should not try
to mix the old and the new API because of conflicting ways of handling
pages and the PG_fscache page flag and because it would be mixing DIO
with buffered I/O. Further, the helper library can't be used with the
old API.
This does not change any of the fscache cookie handling APIs or the
way invalidation is done at this time.
In the near term, I intend to deprecate and remove the old I/O API
(fscache_allocate_page{,s}(), fscache_read_or_alloc_page{,s}(),
fscache_write_page() and fscache_uncache_page()) and eventually
replace most of fscache/cachefiles with something simpler and easier
to follow.
This patchset contains the following parts:
- Some helper patches, including provision of an ITER_XARRAY iov
iterator and a function to do readahead expansion.
- Patches to add the netfs helper library.
- A patch to add the fscache/cachefiles kiocb API.
- A pair of patches to fix some review issues in the ITER_XARRAY and
read helpers as spotted by Al and Willy.
Jeff Layton has patches to add support in Ceph for this that he
intends for this merge window. I have a set of patches to support AFS
that I will post a separate pull request for.
With this, AFS without a cache passes all expected xfstests; with a
cache, there's an extra failure, but that's also there before these
patches. Fixing that probably requires a greater overhaul. Ceph also
passes the expected tests.
I also have patches in a separate branch to tidy up the handling of
PG_fscache/PG_private_2 and their contribution to page refcounting in
the core kernel here, but I haven't included them in this set and will
route them separately"
Link: https://lore.kernel.org/lkml/3779937.1619478404@warthog.procyon.org.uk/
* tag 'netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Miscellaneous fixes
iov_iter: Four fixes for ITER_XARRAY
fscache, cachefiles: Add alternate API to use kiocb for read/write to cache
netfs: Add a tracepoint to log failures that would be otherwise unseen
netfs: Define an interface to talk to a cache
netfs: Add write_begin helper
netfs: Gather stats
netfs: Add tracepoints
netfs: Provide readahead and readpage netfs helpers
netfs, mm: Add set/end/wait_on_page_fscache() aliases
netfs, mm: Move PG_fscache helper funcs to linux/netfs.h
netfs: Documentation for helper library
netfs: Make a netfs helper module
mm: Implement readahead_control pageset expansion
mm/readahead: Handle ractl nr_pages being modified
fs: Document file_ra_state
mm/filemap: Pass the file_ra_state in the ractl
mm: Add set/end/wait functions for PG_private_2
iov_iter: Add ITER_XARRAY
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYIfiiwAKCRCRxhvAZXjc
ogtMAQC+MtgJZdcH5iDHNEyI36JaWUccKRV7PdvfF1YgnXO45gD+IYxR1c/EQQyD
kh2AmqhET6jVhe9Nsob5yxduksI+ygo=
=oh/d
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.helpers.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs mapping helper updates from Christian Brauner:
"This adds kernel-doc to all new idmapping helpers and improves their
naming which was triggered by a discussion with some fs developers.
Some of the names are based on suggestions by Vivek and Al.
Also remove the open-coded permission checking in a few places with
simple helpers. Overall this should lead to more clarity and make it
easier to maintain"
* tag 'fs.idmapped.helpers.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: introduce two inode i_{u,g}id initialization helpers
fs: introduce fsuidgid_has_mapping() helper
fs: document and rename fsid helpers
fs: document mapping helpers
Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
"This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
separate method.
The interface is reasonably uniform across the filesystems that
support it and gives nice boilerplate removal"
* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
ovl: remove unneeded ioctls
fuse: convert to fileattr
fuse: add internal open/release helpers
fuse: unsigned open flags
fuse: move ioctl to separate source file
vfs: remove unused ioctl helpers
ubifs: convert to fileattr
reiserfs: convert to fileattr
ocfs2: convert to fileattr
nilfs2: convert to fileattr
jfs: convert to fileattr
hfsplus: convert to fileattr
efivars: convert to fileattr
xfs: convert to fileattr
orangefs: convert to fileattr
gfs2: convert to fileattr
f2fs: convert to fileattr
ext4: convert to fileattr
ext2: convert to fileattr
btrfs: convert to fileattr
...
Upon file deletion, zero out all fields in ext4_dir_entry2 besides rec_len.
In case sensitive data is stored in filenames, this ensures no potentially
sensitive data is left in the directory entry upon deletion. Also, wipe
these fields upon moving a directory entry during the conversion to an
htree and when splitting htree nodes.
The data wiped may still exist in the journal, but there are future
commits planned to address this.
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Link: https://lore.kernel.org/r/20210422180834.2242353-1-leah.rumancik@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eric has noticed that after pagecache read rework, generic/418 is
occasionally failing for ext4 when blocksize < pagesize. In fact, the
pagecache rework just made hard to hit race in ext4 more likely. The
problem is that since ext4 conversion of direct IO writes to iomap
framework (commit 378f32bab3), we update inode size after direct IO
write only after invalidating page cache. Thus if buffered read sneaks
at unfortunate moment like:
CPU1 - write at offset 1k CPU2 - read from offset 0
iomap_dio_rw(..., IOMAP_DIO_FORCE_WAIT);
ext4_readpage();
ext4_handle_inode_extension()
the read will zero out tail of the page as it still sees smaller inode
size and thus page cache becomes inconsistent with on-disk contents with
all the consequences.
Fix the problem by moving inode size update into end_io handler which
gets called before the page cache is invalidated.
Reported-and-tested-by: Eric Whitney <enwlinux@gmail.com>
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20210415155417.4734-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some filesystem's use a digest of their uuid for f_fsid.
Create a simple wrapper for this open coded folding.
Filesystems that have a non null uuid but use the block device
number for f_fsid may also consider using this helper.
[JK: Added missing asm/byteorder.h include]
Link: https://lore.kernel.org/r/20210322173944.449469-2-amir73il@gmail.com
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This is needed to allow generic/607 to pass for file systems with the
inline data_feature enabled, and it allows the use of file systems
where the directories use inline_data, while the files are accessed
via DAX.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Using no_printk() for jbd_debug() revealed two warnings:
fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:256:30: error: format '%d' expects a matching 'int' argument [-Werror=format=]
256 | jbd_debug(3, "Processing fast commit blk with seq %d");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ext4/fast_commit.c: In function 'ext4_fc_replay_add_range':
fs/ext4/fast_commit.c:1732:30: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=]
1732 | jbd_debug(1, "Converting from %d to %d %lld",
The first one was added incorrectly, and was also missing a few newlines
in debug output, and the second one happened when the type of an
argument changed.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d556435156 ("jbd2: avoid -Wempty-body warnings")
Fixes: 6db0746189 ("ext4: use BIT() macro for BH_** state bits")
Fixes: 5b849b5f96 ("jbd2: fast commit recovery path")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210409201211.1866633-1-arnd@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Made suggested modifications from checkpatch in reference to ERROR:
trailing whitespace
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20210409042035.15516-1-jack.qiu@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In case of if not ext4_fc_add_tlv branch, an error return code is missing.
Cc: stable@kernel.org
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Yihang <xuyihang@huawei.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210408070033.123047-1-xuyihang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix As write_mmp_block() so that it returns -EIO instead of 1, so that
the correct error gets saved into the superblock.
Cc: stable@kernel.org
Fixes: 54d3adbc29 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Liu Zhi Qiang <liuzhiqiang26@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210406025331.148343-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should set the error code when ext4_commit_super check argument failed.
Found in code review.
Fixes: c4be0c1dc4 ("filesystem freeze: add error handling of write_super_lockfs/unlockfs").
Cc: stable@kernel.org
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210402101631.561-1-changfengnan@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before commit 014c9caa29 ("ext4: make ext4_abort() use
__ext4_error()"), the following series of commands would trigger a
panic:
1. mount /dev/sda -o ro,errors=panic test
2. mount /dev/sda -o remount,abort test
After commit 014c9caa29, remounting a file system using the test
mount option "abort" will no longer trigger a panic. This commit will
restore the behaviour immediately before commit 014c9caa29.
(However, note that the Linux kernel's behavior has not been
consistent; some previous kernel versions, including 5.4 and 4.19
similarly did not panic after using the mount option "abort".)
This also makes a change to long-standing behaviour; namely, the
following series commands will now cause a panic, when previously it
did not:
1. mount /dev/sda -o ro,errors=panic test
2. echo test > /sys/fs/ext4/sda/trigger_fs_error
However, this makes ext4's behaviour much more consistent, so this is
a good thing.
Cc: stable@kernel.org
Fixes: 014c9caa29 ("ext4: make ext4_abort() use __ext4_error()")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210401081903.3421208-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The buffer uptodate state has been checked in function set_buffer_uptodate,
there is no need use buffer_uptodate before calling set_buffer_uptodate and
delete it.
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/1617260610-29770-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When CONFIG_QUOTA is enabled, if we failed to mount the filesystem due
to some error happens behind ext4_orphan_cleanup(), it will end up
triggering a after free issue of super_block. The problem is that
ext4_orphan_cleanup() will set SB_ACTIVE flag if CONFIG_QUOTA is
enabled, after we cleanup the truncated inodes, the last iput() will put
them into the lru list, and these inodes' pages may probably dirty and
will be write back by the writeback thread, so it could be raced by
freeing super_block in the error path of mount_bdev().
After check the setting of SB_ACTIVE flag in ext4_orphan_cleanup(), it
was used to ensure updating the quota file properly, but evict inode and
trash data immediately in the last iput does not affect the quotafile,
so setting the SB_ACTIVE flag seems not required[1]. Fix this issue by
just remove the SB_ACTIVE setting.
[1] https://lore.kernel.org/linux-ext4/99cce8ca-e4a0-7301-840f-2ace67c551f3@huawei.com/T/#m04990cfbc4f44592421736b504afcc346b2a7c00
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331033138.918975-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block bitmap prefetching is needed for these allocator optimization
data structures to get populated and provide better group scanning
order. So, turn it on bu default. prefetch_block_bitmaps mount option
is now marked as removed and a new option no_prefetch_block_bitmaps is
added to disable block bitmap prefetching.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of traversing through groups linearly, scan groups in specific
orders at cr 0 and cr 1. At cr 0, we want to find groups that have the
largest free order >= the order of the request. So, with this patch,
we maintain lists for each possible order and insert each group into a
list based on the largest free order in its buddy bitmap. During cr 0
allocation, we traverse these lists in the increasing order of largest
free orders. This allows us to find a group with the best available cr
0 match in constant time. If nothing can be found, we fallback to cr 1
immediately.
At CR1, the story is slightly different. We want to traverse in the
order of increasing average fragment size. For CR1, we maintain a rb
tree of groupinfos which is sorted by average fragment size. Instead
of traversing linearly, at CR1, we traverse in the order of increasing
average fragment size, starting at the most optimal group. This brings
down cr 1 search complexity to log(num groups).
For cr >= 2, we just perform the linear search as before. Also, in
case of lock contention, we intermittently fallback to linear search
even in CR 0 and CR 1 cases. This allows us to proceed during the
allocation path even in case of high contention.
There is an opportunity to do optimization at CR2 too. That's because
at CR2 we only consider groups where bb_free counter (number of free
blocks) is greater than the request extent size. That's left as future
work.
All the changes introduced in this patch are protected under a new
mount option "mb_optimize_scan".
With this patchset, following experiment was performed:
Created a highly fragmented disk of size 65TB. The disk had no
contiguous 2M regions. Following command was run consecutively for 3
times:
time dd if=/dev/urandom of=file bs=2M count=10
Here are the results with and without cr 0/1 optimizations introduced
in this patch:
|---------+------------------------------+---------------------------|
| | Without CR 0/1 Optimizations | With CR 0/1 Optimizations |
|---------+------------------------------+---------------------------|
| 1st run | 5m1.871s | 2m47.642s |
| 2nd run | 2m28.390s | 0m0.611s |
| 3rd run | 2m26.530s | 0m1.255s |
|---------+------------------------------+---------------------------|
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A few arrays in mballoc.c use the total number of valid orders as
their size. Currently, this value is set as "sb->s_blocksize_bits +
2". This makes code harder to read. So, instead add a new macro
MB_NUM_ORDERS(sb) to make the code more readable.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before this patch, the function parse_options() was returning
journal_devnum and journal_ioprio variables to the caller. This patch
generalizes that interface to allow parse_options to return any parsed
options to return back to the caller. In this patch series, it gets
used to capture the value of "mb_optimize_scan=%u" mount option.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
s_mb_buddies_generated gets used later in this patch series to
determine if the cr 0 and cr 1 optimziations should be performed or
not. Currently, s_mb_buddies_generated is protected under a
spin_lock. In the allocation path, it is better if we don't depend on
the lock and instead read the value atomically. In order to do that,
we drop s_bal_lock altogether and we convert the only two protected
fields by it s_mb_buddies_generated and s_mb_generation_time to atomic
type.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.
mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda
So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.
Cc: stable@kernel.org
Fixes: 5012284700 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Matching names with casefolded encrypting directories requires
decrypting entries to confirm case since we are case preserving. We can
avoid needing to decrypt if our hash values don't match.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210319073414.1381041-3-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds support for encryption with casefolding.
Since the name on disk is case preserving, and also encrypted, we can no
longer just recompute the hash on the fly. Additionally, to avoid
leaking extra information from the hash of the unencrypted name, we use
siphash via an fscrypt v2 policy.
The hash is stored at the end of the directory entry for all entries
inside of an encrypted and casefolded directory apart from those that
deal with '.' and '..'. This way, the change is backwards compatible
with existing ext4 filesystems.
[ Changed to advertise this feature via the file:
/sys/fs/ext4/features/encrypted_casefold -- TYT ]
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210319073414.1381041-2-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Give filesystem two little helpers that do the right thing when
initializing the i_uid and i_gid fields on idmapped and non-idmapped
mounts. Filesystems shouldn't have to be concerned with too many
details.
Link: https://lore.kernel.org/r/20210320122623.599086-5-christian.brauner@ubuntu.com
Inspired-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Vivek pointed out that the fs{g,u}id_into_mnt() naming scheme can be
misleading as it could be understood as implying they do the exact same
thing as i_{g,u}id_into_mnt(). The original motivation for this naming
scheme was to signal to callers that the helpers will always take care
to map the k{g,u}id such that the ownership is expressed in terms of the
mnt_users.
Get rid of the confusion by renaming those helpers to something more
sensible. Al suggested mapped_fs{g,u}id() which seems a really good fit.
Usually filesystems don't need to bother with these helpers directly
only in some cases where they allocate objects that carry {g,u}ids which
are either filesystem specific (e.g. xfs quota objects) or don't have a
clean set of helpers as inodes have.
Link: https://lore.kernel.org/r/20210320122623.599086-3-christian.brauner@ubuntu.com
Inspired-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmBXj1oACgkQ8vlZVpUN
gaNnAwgAqZJ0S/Hctexs+v+DNvuyMxsA84pB/9KYlK2zgbBOyK5Iftxjqxb9Sb6j
6XKQOIaP2EXYJ0MDWW/fDMUHatlJvXUp+A9kLTiOLMDaRXbobQzb5jlGg9ZB/pBj
TzISrR4widiqJbVT2RFpO9O7B75BQqlpqFNfkF/yJ9CU/ozAw9x+voPcZK7q8/Sh
+DeQCARvgfx1ZipHGTYKjJdujA0qGcDfboYJpgId/gA5Zi76tx4NlbeXAM2QmRfh
zAd1NzFhqf7JmKDAWDdUeRnrDHcje9FLcAxo7Quq7YWxRKFsOCz9LTxazL2UIoa2
HvGpMD23qmISCLUyyrfnrpGPj/mD2w==
=xcuH
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v5.12"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: initialize ret to suppress smatch warning
ext4: stop inode update before return
ext4: fix rename whiteout with fast commit
ext4: fix timer use-after-free on failed mount
ext4: fix potential error in ext4_do_update_inode
ext4: do not try to set xattr into ea_inode if value is empty
ext4: do not iput inode under running transaction in ext4_rename()
ext4: find old entry again if failed to rename whiteout
ext4: fix error handling in ext4_end_enable_verity()
ext4: fix bh ref count on error paths
fs/ext4: fix integer overflow in s_log_groups_per_flex
ext4: add reclaim checks to xattr code
ext4: shrink race window in ext4_should_retry_alloc()
This patch adds rename whiteout support in fast commits. Note that the
whiteout object that gets created is actually char device. Which
imples, the function ext4_inode_journal_mode(struct inode *inode)
would return "JOURNAL_DATA" for this inode. This has a consequence in
fast commit code that it will make creation of the whiteout object a
fast-commit ineligible behavior and thus will fall back to full
commits. With this patch, this can be observed by running fast commits
with rename whiteout and seeing the stats generated by ext4_fc_stats
tracepoint as follows:
ext4_fc_stats: dev 254:32 fc ineligible reasons:
XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0,
RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16;
num_commits:6, ineligible: 6, numblks: 3
So in short, this patch guarantees that in case of rename whiteout, we
fall back to full commits.
Amir mentioned that instead of creating a new whiteout object for
every rename, we can create a static whiteout object with irrelevant
nlink. That will make fast commits to not fall back to full
commit. But until this happens, this patch will ensure correctness by
falling back to full commits.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When filesystem mount fails because of corrupted filesystem we first
cancel the s_err_report timer reminding fs errors every day and only
then we flush s_error_work. However s_error_work may report another fs
error and re-arm timer thus resulting in timer use-after-free. Fix the
problem by first flushing the work and only after that canceling the
s_err_report timer.
Reported-by: syzbot+628472a2aac693ab0fcd@syzkaller.appspotmail.com
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210315165906.2175-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.
WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
...
Call trace:
ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
__vfs_setxattr+0x208/0x23c fs/xattr.c:177
...
Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.
fallocate test.img -l 1M
mkfs.ext4 -F -b 2048 -O ea_inode test.img
mount test.img /mnt
dd if=/dev/zero of=/mnt/foo bs=2048 count=500
setfattr -n "user.test" /mnt/foo
Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes: 9c6e7853c5 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into
directory, it ends up dropping new created whiteout inode under the
running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode
under running transaction"), we follow the assumptions that evict() does
not get called from a transaction context but in ext4_rename() it breaks
this suggestion. Although it's not a real problem, better to obey it, so
this patch add inode to orphan list and stop transaction before final
iput().
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we failed to add new entry on rename whiteout, we cannot reset the
old->de entry directly, because the old->de could have moved from under
us during make indexed dir. So find the old entry again before reset is
needed, otherwise it may corrupt the filesystem as below.
/dev/sda: Entry '00000001' in ??? (12) has deleted/unused inode 15. CLEARED.
/dev/sda: Unattached inode 75
/dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Fixes: 6b4b8e6b4a ("ext4: fix bug for rename with RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
Reported-by: Yunlei He <heyunlei@hihonor.com>
Fixes: c93d8f8858 ("ext4: add basic fs-verity support")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210302200420.137977-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot found UBSAN: shift-out-of-bounds in ext4_mb_init [1], when
1 << sbi->s_es->s_log_groups_per_flex is bigger than UINT_MAX,
where sbi->s_mb_prefetch is unsigned integer type.
32 is the maximum allowed power of s_log_groups_per_flex. Following if
check will also trigger UBSAN shift-out-of-bound:
if (1 << sbi->s_es->s_log_groups_per_flex >= UINT_MAX) {
So I'm checking it against the raw number, perhaps there is another way
to calculate UINT_MAX max power. Also use min_t as to make sure it's
uint type.
[1] UBSAN: shift-out-of-bounds in fs/ext4/mballoc.c:2713:24
shift exponent 60 is too large for 32-bit type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x137/0x1be lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
ext4_mb_init_backend fs/ext4/mballoc.c:2713 [inline]
ext4_mb_init+0x19bc/0x19f0 fs/ext4/mballoc.c:2898
ext4_fill_super+0xc2ec/0xfbe0 fs/ext4/super.c:4983
Reported-by: syzbot+a8b4b0c60155e87e9484@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210224095800.3350002-1-snovitoll@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot is reporting that ext4 can enter fs reclaim from kvmalloc() while
the transaction is started like:
fs_reclaim_acquire+0x117/0x150 mm/page_alloc.c:4340
might_alloc include/linux/sched/mm.h:193 [inline]
slab_pre_alloc_hook mm/slab.h:493 [inline]
slab_alloc_node mm/slub.c:2817 [inline]
__kmalloc_node+0x5f/0x430 mm/slub.c:4015
kmalloc_node include/linux/slab.h:575 [inline]
kvmalloc_node+0x61/0xf0 mm/util.c:587
kvmalloc include/linux/mm.h:781 [inline]
ext4_xattr_inode_cache_find fs/ext4/xattr.c:1465 [inline]
ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1508 [inline]
ext4_xattr_set_entry+0x1ce6/0x3780 fs/ext4/xattr.c:1649
ext4_xattr_ibody_set+0x78/0x2b0 fs/ext4/xattr.c:2224
ext4_xattr_set_handle+0x8f4/0x13e0 fs/ext4/xattr.c:2380
ext4_xattr_set+0x13a/0x340 fs/ext4/xattr.c:2493
This should be impossible since transaction start sets PF_MEMALLOC_NOFS.
Add some assertions to the code to catch if something isn't working as
expected early.
Link: https://lore.kernel.org/linux-ext4/000000000000563a0205bafb7970@google.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210222171626.21884-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When generic/371 is run on kvm-xfstests using 5.10 and 5.11 kernels, it
fails at significant rates on the two test scenarios that disable
delayed allocation (ext3conv and data_journal) and force actual block
allocation for the fallocate and pwrite functions in the test. The
failure rate on 5.10 for both ext3conv and data_journal on one test
system typically runs about 85%. On 5.11, the failure rate on ext3conv
sometimes drops to as low as 1% while the rate on data_journal
increases to nearly 100%.
The observed failures are largely due to ext4_should_retry_alloc()
cutting off block allocation retries when s_mb_free_pending (used to
indicate that a transaction in progress will free blocks) is 0.
However, free space is usually available when this occurs during runs
of generic/371. It appears that a thread attempting to allocate
blocks is just missing transaction commits in other threads that
increase the free cluster count and reset s_mb_free_pending while
the allocating thread isn't running. Explicitly testing for free space
availability avoids this race.
The current code uses a post-increment operator in the conditional
expression that determines whether the retry limit has been exceeded.
This means that the conditional expression uses the value of the
retry counter before it's increased, resulting in an extra retry cycle.
The current code actually retries twice before hitting its retry limit
rather than once.
Increasing the retry limit to 3 from the current actual maximum retry
count of 2 in combination with the change described above reduces the
observed failure rate to less that 0.1% on both ext3conv and
data_journal with what should be limited impact on users sensitive to
the overhead caused by retries.
A per filesystem percpu counter exported via sysfs is added to allow
users or developers to track the number of times the retry limit is
exceeded without resorting to debugging methods. This should provide
some insight into worst case retry behavior.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210218151132.19678-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=ccMs
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cycle...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmA3qgEACgkQ8vlZVpUN
gaMHqwf+IGiMeyB3BnIbQZjcwgyxRYMMmod0tcGv4yK4bf85+rTZZMcPZm5Ioqwm
+XLnuRW+x3Do6lnzNZj9p+qnPNwX2YGupwGeAoT5puMDKl0J7HhvdqPcNi4WgucW
K+LCAxbPjVFUAkpD2gwgNgXej4Us1QP/93GGG8YhTd+jiYS7axrRbAlE+4SmCsye
83dEWpXSFDE0qXHoaPwLo26LMPySPjWM/UuiWD8ozQ+mcL0Doecw1tWJottSo+Ds
+cJtxiOPVPTFwZUJOt/qoxfPnALrqAeazS+3lGmqK5c3xbvsc9CiYqP15FUbQF08
eCDMo9bpqQdRs4WmaRSvBzV8v+/TXg==
=+amQ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Miscellaneous ext4 cleanups and bug fixes. Pretty boring this cycle..."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add .kunitconfig fragment to enable ext4-specific tests
ext: EXT4_KUNIT_TESTS should depend on EXT4_FS instead of selecting it
ext4: reset retry counter when ext4_alloc_file_blocks() makes progress
ext4: fix potential htree index checksum corruption
ext4: factor out htree rep invariant check
ext4: Change list_for_each* to list_for_each_entry*
ext4: don't try to processed freed blocks until mballoc is initialized
ext4: use DEFINE_MUTEX() for mutex lock
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmAzoWUACgkQnJ2qBz9k
QNnFgQgAlng0JOzeCQvLpwweqFl0FCxYbOsZXC1xDyvfX3TiA6A6oiOR4tx3uhQN
cOQmJXaiMn4oCXjD1j6WZwGfy23yx0XchaoFK9jy2IqodaB/zUjkiWYYqt0G3XIX
ud35mxjLAGS12BCD0c+vHy2RMsUFl5ep+5aBHRHZJJhCcYbl7e5ctXZ3xB1Q0mgI
r639gD8JhH3ICdu9W0NaMvqOrVhJFNmhSGATKL/N96+oKub2x2ycYE4L2OXegxy3
mnFf26LjA8jt7K+KfHloTvkC6D4HVnnvKFvKiIbGKafiWhAE7q57ZO6BPCMajGue
3UHIhWGmwKXRU72+nW6N+089GbcO/g==
=1e+z
-----END PGP SIGNATURE-----
Merge tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull lazytime updates from Jan Kara:
"Cleanups of the lazytime handling in the writeback code making rules
for calling ->dirty_inode() filesystem handlers saner"
* tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: simplify i_state checks in __ext4_update_other_inode_time()
gfs2: don't worry about I_DIRTY_TIME in gfs2_fsync()
fs: improve comments for writeback_single_inode()
fs: drop redundant check from __writeback_single_inode()
fs: clean up __mark_inode_dirty() a bit
fs: pass only I_DIRTY_INODE flags to ->dirty_inode
fs: don't call ->dirty_inode for lazytime timestamp updates
fat: only specify I_DIRTY_TIME when needed in fat_update_time()
fs: only specify I_DIRTY_TIME when needed in generic_update_time()
fs: correctly document the inode dirty flags
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
- Adjust the final parameter of iomap_dio_rw.
- Add a new flag to request that iomap directio writes return EAGAIN if
the write is not a pure overwrite within EOF; this will be used to
reduce lock contention with unaligned direct writes on XFS.
- Amend XFS' directio code to eliminate exclusive locking for unaligned
direct writes if the circumstances permit
-----BEGIN PGP SIGNATURE-----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=AR07
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.12-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The big change in this cycle is some new code to make it possible for
XFS to try unaligned directio overwrites without taking locks. If the
block is fully written and within EOF (i.e. doesn't require any
further fs intervention) then we can let the unlocked write proceed.
If not, we fall back to synchronizing direct writes.
Summary:
- Adjust the final parameter of iomap_dio_rw.
- Add a new flag to request that iomap directio writes return EAGAIN
if the write is not a pure overwrite within EOF; this will be used
to reduce lock contention with unaligned direct writes on XFS.
- Amend XFS' directio code to eliminate exclusive locking for
unaligned direct writes if the circumstances permit"
* tag 'iomap-5.12-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reduce exclusive locking on unaligned dio
xfs: split the unaligned DIO write code out
xfs: improve the reflink_bounce_dio_write tracepoint
xfs: simplify the read/write tracepoints
xfs: remove the buffered I/O fallback assert
xfs: cleanup the read/write helper naming
xfs: make xfs_file_aio_write_checks IOCB_NOWAIT-aware
xfs: factor out a xfs_ilock_iocb helper
iomap: add a IOMAP_DIO_OVERWRITE_ONLY flag
iomap: pass a flags argument to iomap_dio_rw
iomap: rename the flags variable in __iomap_dio_rw
As of [1], we no longer want EXT4_KUNIT_TESTS and others to `select`
their deps. This means it can get harder to get all the right things
selected as we gain more tests w/ more deps over time.
This patch (and [2]) proposes we store kunitconfig fragments in-tree to
represent sets of tests. (N.B. right now we only have one ext4 test).
There's still a discussion to be had about how to have a hierarchy of
these files (e.g. if one wanted to test all of fs/, not just fs/ext4).
But this fragment would likely be a leaf node and isn't blocked on
deciding if we want `import` statements and the like.
Usage
=====
Before [2] (on its way to being merged):
$ cp fs/ext4/.kunitconfig .kunit/
$ ./tools/testing/kunit/kunit.py run
After [2]:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig
".kunitconfig" vs "kunitconfig"
===============================
See also: commit 14ee5cfd45 ("kunit: Rename 'kunitconfig' to '.kunitconfig'").
* The bit about .gitignore exluding it by default is now a con, however.
* But there are a lot of directories with files that begin with "k" and
so this could cause some annoyance w/ tab completion*
* This is the name kunit.py expects right now, so some people are used
to .kunitconfig over "kunitconfig"
[1] https://lore.kernel.org/linux-ext4/20210122110234.2825685-1-geert@linux-m68k.org/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/commit/?h=kunit&id=243180f5924ed27ea417db39feb7f9691777688e
* 372/5556 directories isn't too much, but still not a small number:
$ find -type f -name 'k*' | xargs dirname | sort -u | wc -l
372
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Link: https://lore.kernel.org/r/20210210013206.136227-1-dlatypov@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_KUNIT_TESTS selects EXT4_FS, thus enabling an optional feature the
user may not want to enable. Fix this by making the test depend on
EXT4_FS instead.
Fixes: 1cbeab1b24 ("ext4: add kunit test for decoding extended timestamps")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210122110234.2825685-1-geert@linux-m68k.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change the retry policy in ext4_alloc_file_blocks() to allow for a full
retry cycle whenever a portion of an allocation request has been
fulfilled. A large allocation request often results in multiple calls
to ext4_map_blocks(), each of which is potentially subject to a
temporary ENOSPC condition and retry cycle. The current code only
allows for a single retry cycle.
This patch does not address a known bug or reported complaint.
However, it should make block allocation for fallocate and zero range
more robust.
In addition, simplify the conditional controlling the allocation while
loop, where testing len alone is sufficient. Remove the assignment to
ret2 in the error path after the call to ext4_map_blocks() since its
value isn't subsequently used.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210113221403.18258-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity
metadata from a file that has fs-verity enabled, including:
- The Merkle tree
- The fsverity_descriptor (not including the signature if present)
- The built-in signature, if present
This ioctl has similar semantics to pread(). It is passed the type of
metadata to read (one of the above three), and a buffer, offset, and
size. It returns the number of bytes read or an error.
Separate patches will add support for each of the above metadata types.
This patch just adds the ioctl itself.
This ioctl doesn't make any assumption about where the metadata is
stored on-disk. It does assume the metadata is in a stable format, but
that's basically already the case:
- The Merkle tree and fsverity_descriptor are defined by how fs-verity
file digests are computed; see the "File digest computation" section
of Documentation/filesystems/fsverity.rst. Technically, the way in
which the levels of the tree are ordered relative to each other wasn't
previously specified, but it's logical to put the root level first.
- The built-in signature is the value passed to FS_IOC_ENABLE_VERITY.
This ioctl is useful because it allows writing a server program that
takes a verity file and serves it to a client program, such that the
client can do its own fs-verity compatible verification of the file.
This only makes sense if the client doesn't trust the server and if the
server needs to provide the storage for the client.
More concretely, there is interest in using this ability in Android to
export APK files (which are protected by fs-verity) to "protected VMs".
This would use Protected KVM (https://lwn.net/Articles/836693), which
provides an isolated execution environment without having to trust the
traditional "host". A "guest" VM can boot from a signed image and
perform specific tasks in a minimum trusted environment using files that
have fs-verity enabled on the host, without trusting the host or
requiring that the guest has its own trusted storage.
Technically, it would be possible to duplicate the metadata and store it
in separate files for serving. However, that would be less efficient
and would require extra care in userspace to maintain file consistency.
In addition to the above, the ability to read the built-in signatures is
useful because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
In the case where we need to do an interior node split, and
immediately afterwards, we are unable to allocate a new directory leaf
block due to ENOSPC, the directory index checksum's will not be filled
in correctly (and indeed, will not be correctly journalled).
This looks like a bug that was introduced when we added largedir
support. The original code doesn't make any sense (and should have
been caught in code review), but it was hidden because most of the
time, the index node checksum will be set by do_split(). But if
do_split bails out due to ENOSPC, then ext4_handle_dirty_dx_node()
won't get called, and so the directory index checksum field will not
get set, leading to:
EXT4-fs error (device sdb): dx_probe:858: inode #6635543: block 4022: comm nfsd: Directory index failed checksum
Google-Bug-Id: 176345532
Fixes: e08ac99fa2 ("ext4: add largedir feature")
Cc: Artem Blagodarenko <artem.blagodarenko@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch moves some debugging code which is used to validate the
hash tree node when doing a binary search of an htree node into a
separate function, which is disabled by default (since it is only used
by developers when they are modifying the htree code paths).
In addition to cleaning up the code to make it more maintainable, it
silences a Clang compiler warning when -Wunreachable-code-aggressive
is enabled. (There is no plan to enable this warning by default, since
there it has far too many false positives; nevertheless, this commit
reduces one of the many false positives by one.)
Signed-off-by: Vinicius Tinti <viniciustinti@gmail.com>
Link: https://lore.kernel.org/r/20210202162837.129631-1-viniciustinti@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we try to make any changes via the journal between when the journal
is initialized, but before the multi-block allocated is initialized,
we will end up deferencing a NULL pointer when the journal commit
callback function calls ext4_process_freed_data().
The proximate cause of this failure was commit 2d01ddc866 ("ext4:
save error info to sb through journal if available") since file system
corruption problems detected before the call to ext4_mb_init() would
result in a journal commit before we aborted the mount of the file
system.... and we would then trigger the NULL pointer deref.
Link: https://lore.kernel.org/r/YAm8qH/0oo2ofSMR@mit.edu
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no point in allocating memory for a synchronous flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable idmapped mounts for ext4. All dedicated helpers we need for this
exist. So this basically just means we're passing down the
user_namespace argument from the VFS methods to the relevant helpers.
Let's create simple example where we idmap an ext4 filesystem:
root@f2-vm:~# truncate -s 5G ext4.img
root@f2-vm:~# mkfs.ext4 ./ext4.img
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 1310720 4k blocks and 327680 inodes
Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
root@f2-vm:~# losetup -f --show ./ext4.img
/dev/loop0
root@f2-vm:~# mount /dev/loop0 /mnt
root@f2-vm:~# ls -al /mnt/
total 24
drwxr-xr-x 3 root root 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 root root 16384 Oct 28 13:34 lost+found
# Let's create an idmapped mount at /idmapped1 where we map uid and gid
# 0 to uid and gid 1000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/
root@f2-vm:/# ls -al /idmapped1/
total 24
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found
# Let's create an idmapped mount at /idmapped2 where we map uid and gid
# 0 to uid and gid 2000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/
root@f2-vm:/# ls -al /idmapped2/
total 24
drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found
Let's create another example where we idmap the rootfs filesystem
without a mapping for uid 0 and gid 0:
# Create an idmapped mount of for a full POSIX range of rootfs under
# /mnt but without a mapping for uid 0 to reduce attack surface
root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/
# Since we don't have a mapping for uid and gid 0 all files owned by
# uid and gid 0 should show up as uid and gid 65534:
root@f2-vm:/# ls -al /mnt/
total 664
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev
drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64
lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32
drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc
drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run
lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys
drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp
drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr
drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var
# Since we do have a mapping for uid and gid 1000 all files owned by
# uid and gid 1000 should simply show up as uid and gid 1000:
root@f2-vm:/# ls -al /mnt/home/ubuntu/
total 40
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 .
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pass a set of flags to iomap_dio_rw instead of the boolean
wait_for_completion argument. The IOMAP_DIO_FORCE_WAIT flag
replaces the wait_for_completion, but only needs to be passed
when the iocb isn't synchronous to start with to simplify the
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
[djwong: rework xfs_file.c so that we can push iomap changes separately]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* For the new fast_commit feature
* Fix some error handling codepaths in whiteout handling and
mountpoint sampling
* Fix how we write ext4_error information so it goes through the journal
when journalling is active, to avoid races that can lead to lost
error information, superblock checksum failures, or DIF/DIX features.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmAB8eMACgkQ8vlZVpUN
gaMUxAf+MW22dceTto2RO0ox9OEBNoZDFiVnlEuUaIOxkqOlovIWaqX7wwuF/121
+FaNeDVzqNSS/QjQSB5lHF5OfHCD2u1Ef/bGzCm9cQyeN2/n0sCsStfPCcyLHy/0
4R8PsjF0xhhbCETLcAc0U/YBFEoqSn1i7DG5nnpx63Wt1S/SSMmTAXzafWbzisEZ
XNsz3CEPCDDSmSzOt3qMMHxkSoOZhYcLe7fCoKkhZ2pvTyrQsHrne6NNLtxc+sDL
AcKkaI0EWFiFRhebowQO/5ouq6nnGKLCsukuZN9//Br8ht5gNcFpuKNVFl+LOiM6
ud4H3qcRokcdPPAn3uwI0AJKFXqLvg==
=Dgdj
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A number of bug fixes for ext4:
- Fix for the new fast_commit feature
- Fix some error handling codepaths in whiteout handling and
mountpoint sampling
- Fix how we write ext4_error information so it goes through the
journal when journalling is active, to avoid races that can lead to
lost error information, superblock checksum failures, or DIF/DIX
features"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove expensive flush on fast commit
ext4: fix bug for rename with RENAME_WHITEOUT
ext4: fix wrong list_splice in ext4_fc_cleanup
ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR
ext4: don't leak old mountpoint samples
ext4: drop ext4_handle_dirty_super()
ext4: fix superblock checksum failure when setting password salt
ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super()
ext4: save error info to sb through journal if available
ext4: protect superblock modifications with a buffer lock
ext4: drop sync argument of ext4_commit_super()
ext4: combine ext4_handle_error() and save_error_info()
In the fast commit, it adds REQ_FUA and REQ_PREFLUSH on each fast
commit block when barrier is enabled. However, in recovery phase,
ext4 compares CRC value in the tail. So it is sufficient to add
REQ_FUA and REQ_PREFLUSH on the block that has tail.
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210106013242epcms2p5b6b4ed8ca86f29456fdf56aa580e74b4@epcms2p5
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got a "deleted inode referenced" warning cross our fsstress test. The
bug can be reproduced easily with following steps:
cd /dev/shm
mkdir test/
fallocate -l 128M img
mkfs.ext4 -b 1024 img
mount img test/
dd if=/dev/zero of=test/foo bs=1M count=128
mkdir test/dir/ && cd test/dir/
for ((i=0;i<1000;i++)); do touch file$i; done # consume all block
cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD,
/dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in
ext4_rename will return ENOSPC!!
cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1
We will get the output:
"ls: cannot access 'test/dir/file1': Structure needs cleaning"
and the dmesg show:
"EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls:
deleted inode referenced: 139"
ext4_rename will create a special inode for whiteout and use this 'ino'
to replace the source file's dir entry 'ino'. Once error happens
latter(the error above was the ENOSPC return from ext4_add_entry in
ext4_rename since all space has been consumed), the cleanup do drop the
nlink for whiteout, but forget to restore 'ino' with source file. This
will trigger the bug describle as above.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Fixes: cd808deced ("ext4: support RENAME_WHITEOUT")
Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After full/fast commit, entries in staging queue are promoted to main
queue. In ext4_fs_cleanup function, it splice to staging queue to
staging queue.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201230094851epcms2p6eeead8cc984379b37b2efd21af90fd1a@epcms2p6
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
1: ext4_iget/ext4_find_extent never returns NULL, use IS_ERR
instead of IS_ERR_OR_NULL to fix this.
2: ext4_fc_replay_inode should set the inode to NULL when IS_ERR.
and go to call iput properly.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201230033827.3996064-1-yili@winhong.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Since I_DIRTY_TIME and I_DIRTY_INODE are mutually exclusive in i_state,
there's no need to check for I_DIRTY_TIME && !I_DIRTY_INODE. Just check
for I_DIRTY_TIME.
Also introduce a helper function in include/linux/fs.h to do this check.
Link: https://lore.kernel.org/r/20210112190253.64307-12-ebiggers@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There is no need to call ->dirty_inode for lazytime timestamp updates
(i.e. for __mark_inode_dirty(I_DIRTY_TIME)), since by the definition of
lazytime, filesystems must ignore these updates. Filesystems only need
to care about the updated timestamps when they expire.
Therefore, only call ->dirty_inode when I_DIRTY_INODE is set.
Based on a patch from Christoph Hellwig:
https://lore.kernel.org/r/20200325122825.1086872-4-hch@lst.de
Link: https://lore.kernel.org/r/20210112190253.64307-6-ebiggers@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----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=a5OE
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4; no new features this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
ext4: remove unnecessary wbc parameter from ext4_bio_write_page
ext4: avoid s_mb_prefetch to be zero in individual scenarios
ext4: defer saving error info from atomic context
ext4: simplify ext4 error translation
ext4: move functions in super.c
ext4: make ext4_abort() use __ext4_error()
ext4: standardize error message in ext4_protect_reserved_inode()
ext4: remove redundant sb checksum recomputation
ext4: don't remount read-only with errors=continue on reboot
ext4: fix deadlock with fs freezing and EA inodes
jbd2: add a helper to find out number of fast commit blocks
ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h
ext4: fix fall-through warnings for Clang
ext4: add docs about fast commit idempotence
ext4: remove the unused EXT4_CURRENT_REV macro
ext4: fix an IS_ERR() vs NULL check
ext4: check for invalid block size early when mounting a file system
ext4: fix a memory leak of ext4_free_data
ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()
ext4: update ext4_data_block_valid related comments
...
When the first file is opened, ext4 samples the mountpoint of the
filesystem in 64 bytes of the super block. It does so using
strlcpy(), this means that the remaining bytes in the super block
string buffer are untouched. If the mount point before had a longer
path than the current one, it can be reconstructed.
Consider the case where the fs was mounted to "/media/johnjdeveloper"
and later to "/". The super block buffer then contains
"/\x00edia/johnjdeveloper".
This case was seen in the wild and caused confusion how the name
of a developer ands up on the super block of a filesystem used
in production...
Fix this by using strncpy() instead of strlcpy(). The superblock
field is defined to be a fixed-size char array, and it is already
marked using __nonstring in fs/ext4/ext4.h. The consumer of the field
in e2fsprogs already assumes that in the case of a 64+ byte mount
path, that s_last_mounted will not be NUL terminated.
Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.edu
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The wrapper is now useless since it does what
ext4_handle_dirty_metadata() does. Just remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When setting password salt in the superblock, we forget to recompute the
superblock checksum so it will not match until the next superblock
modification which recomputes the checksum. Fix it.
CC: Michael Halcrow <mhalcrow@google.com>
Reported-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 9bd8212f98 ("ext4 crypto: add encryption policy and password salt support")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If journalling is still working at the moment we get to writing error
information to the superblock we cannot write directly to the superblock
as such write could race with journalled update of the superblock and
cause journal checksum failures, writing inconsistent information to the
journal or other problems. We cannot journal the superblock directly
from the error handling functions as we are running in uncertain context
and could deadlock so just punt journalled superblock update to a
workqueue.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Protect all superblock modifications (including checksum computation)
with a superblock buffer lock. That way we are sure computed checksum
matches current superblock contents (a mismatch could cause checksum
failures in nojournal mode or if an unjournalled superblock update races
with a journalled one). Also we avoid modifying superblock contents
while it is being written out (which can cause DIF/DIX failures if we
are running in nojournal mode).
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Everybody passes 1 as sync argument of ext4_commit_super(). Just drop
it.
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_bio_write_page does not need wbc parameter, since its parameter
io contains the io_wbc field. The io::io_wbc is initialized by
ext4_io_submit_init which is called in ext4_writepages and
ext4_writepage functions prior to ext4_bio_write_page.
Therefor, when ext4_bio_write_page is called, wbc info
has already been included in io parameter.
Signed-off-by: Lei Chen <lennychen@tencent.com>
Link: https://lore.kernel.org/r/1607669664-25656-1-git-send-email-lennychen@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
save_error_info() is always called together with ext4_handle_error().
Combine them into a single call and move unconditional bits out of
save_error_info() into ext4_handle_error().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit cfd7323772 ("ext4: add prefetching for block allocation
bitmaps") introduced block bitmap prefetch, and expects to read block
bitmaps of flex_bg through an IO. However, it seems to ignore the
value range of s_log_groups_per_flex. In the scenario where the value
of s_log_groups_per_flex is greater than 27, s_mb_prefetch or
s_mb_prefetch_limit will overflow, cause a divide zero exception.
In addition, the logic of calculating nr is also flawed, because the
size of flexbg is fixed during a single mount, but s_mb_prefetch can
be modified, which causes nr to fail to meet the value condition of
[1, flexbg_size].
To solve this problem, we need to set the upper limit of
s_mb_prefetch. Since we expect to load block bitmaps of a flex_bg
through an IO, we can consider determining a reasonable upper limit
among the IO limit parameters. After consideration, we chose
BLK_MAX_SEGMENT_SIZE. This is a good choice to solve divide zero
problem and avoiding performance degradation.
[ Some minor code simplifications to make the changes easy to follow -- TYT ]
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Samuel Liao <samuelliao@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1607051143-24508-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When filesystem inconsistency is detected with group locked, we
currently try to modify superblock to store error there without
blocking. However this can cause superblock checksum failures (or
DIF/DIX failure) when the superblock is just being written out.
Make error handling code just store error information in ext4_sb_info
structure and copy it to on-disk superblock only in ext4_commit_super().
In case of error happening with group locked, we just postpone the
superblock flushing to a workqueue.
[ Added fixup so that s_first_error_* does not get updated after
the file system is remounted.
Also added fix for syzbot failure. - Ted ]
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201127113405.26867-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+9043030c040ce1849a60@syzkaller.appspotmail.com
In this round, we've made more work into per-file compression support. For
example, F2FS_IOC_GET|SET_COMPRESS_OPTION provides a way to change the
algorithm or cluster size per file. F2FS_IOC_COMPRESS|DECOMPRESS_FILE provides
a way to compress and decompress the existing normal files manually along with
a new mount option, compress_mode=fs|user, which can control who compresses the
data. Chao also added a checksum feature with a mount option so that we are able
to detect any corrupted cluster. In addition, Daniel contributed casefolding
with encryption patch, which will be used for Android devices.
Enhancement:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fix:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well.
-----BEGIN PGP SIGNATURE-----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=KneU
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've made more work into per-file compression support.
For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to
change the algorithm or cluster size per file. F2FS_IOC_COMPRESS |
DECOMPRESS_FILE provides a way to compress and decompress the existing
normal files manually.
There is also a new mount option, compress_mode=fs|user, which can
control who compresses the data.
Chao also added a checksum feature with a mount option so that
we are able to detect any corrupted cluster.
In addition, Daniel contributed casefolding with encryption patch,
which will be used for Android devices.
Summary:
Enhancements:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fixes:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well"
* tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits)
f2fs: compress: fix compression chksum
f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
f2fs: fix race of pending_pages in decompression
f2fs: fix to account inline xattr correctly during recovery
f2fs: inline: fix wrong inline inode stat
f2fs: inline: correct comment in f2fs_recover_inline_data
f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
f2fs: convert to F2FS_*_INO macro
f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
f2fs: don't allow any writes on readonly mount
f2fs: avoid race condition for shrinker count
f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
f2fs: add compress_mode mount option
f2fs: Remove unnecessary unlikely()
f2fs: init dirty_secmap incorrectly
f2fs: remove buffer_head which has 32bits limit
f2fs: fix wrong block count instead of bytes
f2fs: use new conversion functions between blks and bytes
f2fs: rename logical_to_blk and blk_to_logical
f2fs: fix kbytes written stat for multi-device case
...
We convert errno's to ext4 on-disk format error codes in
save_error_info(). Add a function and a bit of macro magic to make this
simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Just move error info related functions in super.c close to
ext4_handle_error(). We'll want to combine save_error_info() with
ext4_handle_error() and this makes change more obvious and saves a
forward declaration as well. No functional change.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only difference between __ext4_abort() and __ext4_error() is that
the former one ignores errors=continue mount option. Unify the code to
reduce duplication.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We use __ext4_error() when ext4_protect_reserved_inode() finds
filesystem corruption. However EXT4_ERROR_INODE_ERR() is perfectly
capable of reporting all the needed information. So just use that.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Superblock is written out either through ext4_commit_super() or through
ext4_handle_dirty_super(). In both cases we recompute the checksum so it
is not necessary to recompute it after updating superblock free inodes &
blocks counters.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_handle_error() with errors=continue mount option can accidentally
remount the filesystem read-only when the system is rebooting. Fix that.
Fixes: 1dc1097ff6 ("ext4: avoid panic during forced reboot")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20201127113405.26867-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Xattr code using inodes with large xattr data can end up dropping last
inode reference (and thus deleting the inode) from places like
ext4_xattr_set_entry(). That function is called with transaction started
and so ext4_evict_inode() can deadlock against fs freezing like:
CPU1 CPU2
removexattr() freeze_super()
vfs_removexattr()
ext4_xattr_set()
handle = ext4_journal_start()
...
ext4_xattr_set_entry()
iput(old_ea_inode)
ext4_evict_inode(old_ea_inode)
sb->s_writers.frozen = SB_FREEZE_FS;
sb_wait_write(sb, SB_FREEZE_FS);
ext4_freeze()
jbd2_journal_lock_updates()
-> blocks waiting for all
handles to stop
sb_start_intwrite()
-> blocks as sb is already in SB_FREEZE_FS state
Generally it is advisable to delete inodes from a separate transaction
as it can consume quite some credits however in this case it would be
quite clumsy and furthermore the credits for inode deletion are quite
limited and already accounted for. So just tweak ext4_evict_inode() to
avoid freeze protection if we have transaction already started and thus
it is not really needed anyway.
Cc: stable@vger.kernel.org
Fixes: dec214d00e ("ext4: xattr inode deduplication")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127110649.24730-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch makes fast_commit.h byte by byte identical with
e2fsprogs/fast_commit.h. This will help us ensure that there are no
on-disk format inconsistencies between e2fsck and kernel ext4.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201120202232.2240293-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit on-disk format is designed such that the replay of these
tags can be idempotent. This patch adds documentation in the code in
form of comments and in form kernel docs that describes these
characteristics. This patch also adds a TODO item needed to ensure
kernel fast commit replay idempotence.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201119232822.1860882-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext4_find_extent() function never returns NULL, it returns error
pointers.
Fixes: 44059e503b03 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201023112232.GB282278@mwanda
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Check for valid block size directly by validating s_log_block_size; we
were doing this in two places. First, by calculating blocksize via
BLOCK_SIZE << s_log_block_size, and then checking that the blocksize
was valid. And then secondly, by checking s_log_block_size directly.
The first check is not reliable, and can trigger an UBSAN warning if
s_log_block_size on a maliciously corrupted superblock is greater than
22. This is harmless, since the second test will correctly reject the
maliciously fuzzed file system, but to make syzbot shut up, and
because the two checks are duplicative in any case, delete the
blocksize check, and move the s_log_block_size earlier in
ext4_fill_super().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+345b75652b1d24227443@syzkaller.appspotmail.com
When freeing metadata, we will create an ext4_free_data and
insert it into the pending free list. After the current
transaction is committed, the object will be freed.
ext4_mb_free_metadata() will check whether the area to be freed
overlaps with the pending free list. If true, return directly. At this
time, ext4_free_data is leaked. Fortunately, the probability of this
problem is small, since it only occurs if the file system is corrupted
such that a block is claimed by more one inode and those inodes are
deleted within a single jbd2 transaction.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/1604764698-4269-8-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/Xec8QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpoLbEACzXypgZWwMdfgRckA/Vt333rXHtbhUV+hK
2XP+P81iRvr9Esi31UPbRp82vrgcDO0cpI1QmQojS5U5TIQP88BfXptfRZZu48eb
wT5RDDNQ34HItqAh/yEuYsv9yUKcxeIrB99tBVvM+4UmQg9zTdIW3mg6PvCBdbhV
N38jI0tCF/PJatjfRuphT/nXonQLPWBlVDmZk06KZQFOwQe9ep1vUi1+nbiRPuo3
geFBpTh1Kp6Vl1B3n4RpECs6Y7I0RRuJdaH2sDizICla1/BW91F9fQwHimNnUxUq
e1Q1kMuh6ftcQGkYlHSYcPhuv6CvorldTZCO5arPxWpcwvxriTSMRPWAgUr5pEiF
fhiGhqeDu9e6vl9vS31wUD1B30hy+jFz9wyjRrDwJ3cPHH1JVBjTzvdX+cIh/1ku
IbIwUMteUtvUrzqAv/DzbGhedp7xWtOFaVo8j0QFYh9zkjd6b8yDOF/yztwX2gjY
Xt1cd+KpDSiN449ZRaoMI0sCJAxqzhMa6nsWlb0L7KuNyWKAbvKQBm9Rb47FLV9A
Vx70KC+zkFoyw23capvIahmQazerriUJ5PGe0lVm6ROgmIFdCpXTPDjnrvq/6RZ/
GEpD7gTW9atGJ7EuEE8686sAfKD5kneChWLX5EHXf0d0AG5Mr2lKsluiGp5LpPJg
Q1Xqs6xwww==
=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
This kunit update for Linux 5.11-rc1 consists of:
-- documentation update and fix to kunit_tool to parse diagnostic
messages correctly from David Gow
-- Support for Parameterized Testing and fs/ext4 test updates to use
KUnit parameterized testing feature from Arpitha Raghunandan
-- Helper to derive file names depending on --build_dir argument
from Andy Shevchenko
-----BEGIN PGP SIGNATURE-----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=jqjK
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit updates from Shuah Khan:
- documentation update and fix to kunit_tool to parse diagnostic
messages correctly from David Gow
- Support for Parameterized Testing and fs/ext4 test updates to use
KUnit parameterized testing feature from Arpitha Raghunandan
- Helper to derive file names depending on --build_dir argument from
Andy Shevchenko
* tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
fs: ext4: Modify inode-test.c to use KUnit parameterized testing feature
kunit: Support for Parameterized Testing
kunit: kunit_tool: Correctly parse diagnostic messages
Documentation: kunit: provide guidance for testing many inputs
kunit: Introduce get_file_path() helper
This release there are some fixes for longstanding problems, as well as
some cleanups:
- Fix a race condition where a duplicate filename could be created in an
encrypted directory if a syscall that creates a new filename raced
with the directory's encryption key being added.
- Allow deleting files that use an unsupported encryption policy.
- Simplify the locking for 'struct fscrypt_master_key'.
- Remove kernel-internal constants from the UAPI header.
As usual, all these patches have been in linux-next with no reported
issues, and I've tested them with xfstests.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCX9bcDxQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/HRAP95FGQqS47rIEh4LrvS7cohMJxb5NiX
KokAyB88GgmzLQD/c4Xh+iYOxxhFX5NRgruuoec876DrzsuNbEt7WNJ6CQc=
=CBoc
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release there are some fixes for longstanding problems, as well
as some cleanups:
- Fix a race condition where a duplicate filename could be created in
an encrypted directory if a syscall that creates a new filename
raced with the directory's encryption key being added.
- Allow deleting files that use an unsupported encryption policy.
- Simplify the locking for 'struct fscrypt_master_key'.
- Remove kernel-internal constants from the UAPI header.
As usual, all these patches have been in linux-next with no reported
issues, and I've tested them with xfstests"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: allow deleting files with unsupported encryption policy
fscrypt: unexport fscrypt_get_encryption_info()
fscrypt: move fscrypt_require_key() to fscrypt_private.h
fscrypt: move body of fscrypt_prepare_setattr() out-of-line
fscrypt: introduce fscrypt_prepare_readdir()
ext4: don't call fscrypt_get_encryption_info() from dx_show_leaf()
ubifs: remove ubifs_dir_open()
f2fs: remove f2fs_dir_open()
ext4: remove ext4_dir_open()
fscrypt: simplify master key locking
fscrypt: remove unnecessary calls to fscrypt_require_key()
ubifs: prevent creating duplicate encrypted filenames
f2fs: prevent creating duplicate encrypted filenames
ext4: prevent creating duplicate encrypted filenames
fscrypt: add fscrypt_is_nokey_name()
fscrypt: remove kernel-internal constants from UAPI header
Since ext4_data_block_valid() has been renamed to ext4_inode_block_valid(),
the related comments need to be updated.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-5-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The code of mb_find_order_for_block is a bit obscure, but we can
simplify it with mb_find_buddy(), make the code more concise.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-3-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After this patch (163a203), if an abnormal bitmap is detected, we
will mark the group as corrupt, and we will not use this group in
the future. Therefore, it should be meaningless to regenerate the
buddy bitmap of this group, It might be better to delete it.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-2-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are currently multiple forms of assertion, such as J_ASSERT().
J_ASEERT() is provided for the jbd module, which is a public module.
Maybe we should use custom ASSERT() like other file systems, such as
xfs, which would be better.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, it is hard to understand which quota journalling type is enabled:
you need to be quite familiar with kernel code and trace it or really
understand what different combinations of fs flags/mount options lead to.
This patch adds printing of current quota jounalling mode on each
mount/remount, thus making it easier to check it at a glance/in autotests.
The semantics is similar to ext4 data journalling modes:
* journalled - quota configured, journalling will be enabled
* writeback - quota configured, journalling won't be enabled
* none - quota isn't configured
* disabled - kernel compiled without CONFIG_QUOTA feature
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1603336860-16153-2-git-send-email-dotdot@yandex-team.ru
Signed-off-by: Roman Anufriev <dotdot@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, there are several places, where we check whether fs is
capable of enabling quota or if quota is journalled with quite long
and non-self-descriptive condition statements.
This patch wraps these statements into helpers for better readability
and easier usage.
Link: https://lore.kernel.org/r/1603336860-16153-1-git-send-email-dotdot@yandex-team.ru
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Anufriev <dotdot@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variable ex is assigned a variable that is not being read, the assignment
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201021132326.148052-1-colin.king@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
bv_page can't be NULL in a valid bio_vec, so we can remove the NULL check,
as we did in other places when calling bio_for_each_segment_all() to go
through all bio_vec of a bio.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Link: https://lore.kernel.org/r/20201020082201.34257-1-tian.xianting@h3c.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The out_fail branch path don't release the bh and the second bh is
valid only in the for statement, so we don't need to set them to NULL.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/1603194069-17557-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This shifts the responsibility of setting up dentry operations from
fscrypt to the individual filesystems, allowing them to have their own
operations while still setting fscrypt's d_revalidate as appropriate.
Most filesystems can just use generic_set_encrypted_ci_d_ops, unless
they have their own specific dentry operations as well. That operation
will set the minimal d_ops required under the circumstances.
Since the fscrypt d_ops are set later on, we must set all d_ops there,
since we cannot adjust those later on. This should not result in any
change in behavior.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The last remaining use of fscrypt_get_encryption_info() from filesystems
is for readdir (->iterate_shared()). Every other call is now in
fs/crypto/ as part of some other higher-level operation.
We need to add a new argument to fscrypt_get_encryption_info() to
indicate whether the encryption policy is allowed to be unrecognized or
not. Doing this is easier if we can work with high-level operations
rather than direct filesystem use of fscrypt_get_encryption_info().
So add a function fscrypt_prepare_readdir() which wraps the call to
fscrypt_get_encryption_info() for the readdir use case.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The call to fscrypt_get_encryption_info() in dx_show_leaf() is too low
in the call tree; fscrypt_get_encryption_info() should have already been
called when starting the directory operation. And indeed, it already
is. Moreover, the encryption key is guaranteed to already be available
because dx_show_leaf() is only called when adding a new directory entry.
And even if the key wasn't available, dx_show_leaf() uses
fscrypt_fname_disk_to_usr() which knows how to create a no-key name.
So for the above reasons, and because it would be desirable to stop
exporting fscrypt_get_encryption_info() directly to filesystems, remove
the call to fscrypt_get_encryption_info() from dx_show_leaf().
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Since encrypted directories can be opened and searched without their key
being available, and each readdir and ->lookup() tries to set up the
key, trying to set up the key in ->open() too isn't really useful.
Just remove it so that directories don't need an ->open() method
anymore, and so that we eliminate a use of fscrypt_get_encryption_info()
(which I'd like to stop exporting to filesystems).
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store the frozen superblock in struct block_device to avoid the awkward
interface that can return a sb only used a cookie, an ERR_PTR or NULL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As described in "fscrypt: add fscrypt_is_nokey_name()", it's possible to
create a duplicate filename in an encrypted directory by creating a file
concurrently with adding the directory's encryption key.
Fix this bug on ext4 by rejecting no-key dentries in ext4_add_entry().
Note that the duplicate check in ext4_find_dest_de() sometimes prevented
this bug. However in many cases it didn't, since ext4_find_dest_de()
doesn't examine every dentry.
Fixes: 4461471107 ("ext4 crypto: enable filename encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201118075609.120337-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The idea of the warning in ext4_update_dx_flag() is that we should warn
when we are clearing EXT4_INODE_INDEX on a filesystem with metadata
checksums enabled since after clearing the flag, checksums for internal
htree nodes will become invalid. So there's no need to warn (or actually
do anything) when EXT4_INODE_INDEX is not set.
Link: https://lore.kernel.org/r/20201118153032.17281-1-jack@suse.cz
Fixes: 48a3431195 ("ext4: fix checksum errors with indexed dirs")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The options in /proc/mounts must be valid mount options --- and
fast_commit is not a mount option. Otherwise, command sequences like
this will fail:
# mount /dev/vdc /vdc
# mkdir -p /vdc/phoronix_test_suite /pts
# mount --bind /vdc/phoronix_test_suite /pts
# mount -o remount,nodioread_nolock /pts
mount: /pts: mount point not mounted or bad option.
And in the system logs, you'll find:
EXT4-fs (vdc): Unrecognized mount option "fast_commit" or missing value
Fixes: 995a3ed67f ("ext4: add fast_commit feature and handling for extended mount options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Christoph Hellwig