On some platforms such as Up Extreme all links are enabled but only one
link can be used by external codec. Instead of exact match of two masks,
first check whether link_mask of mach is subset of link_mask supported
by hw and then go on searching link_adr.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add smart amplifier component support, which is designed as another new
type of process component and used for speaker protection algorithm
integration.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch invokes the DSP power down notifier to inform
DSP that driver is going to be removed.
The module removal entails DSP power down, disabling of
IRQs and more. Therefore it is highly recommended to inform
the DSP about this upcoming event.
Due to hardware limitations on some Intel platforms it is necessary
to power gate all LPSRAM banks that were enabled prior to controller
reset. Otherwise, an attempt to write LPSRAM control registers may
have no effect.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a snd_sof_dsp_power_down_notify() method which aims to
prepare the DSP for the upcoming power down.
This new function make use of SOF_IPC_PM_CTX_SAVE message.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This provides a better separation between runtime and PM sleep
callbacks.
Only do nothing if given runtime flag is set and calback is not set.
With the current implementation, if PM sleep callback is set but runtime
callback is not set then at runtime resume we reload the firmware even
if we do not support runtime resume callback.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .read_prop callback is supposed to be called by the SoundWire core
only. Calling it again from this driver results in an additional
memory allocation for no good reason.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200515211531.11416-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the sdw_stream is allocated in machine driver,
set_sdw_stream() is also called with a NULL argument during the
dailink shutdown.
In this case, the drivers should not allocate any memory, and just
return.
Detected with KASAN/kmemleak.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200515211531.11416-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire bus core already assigns the slave ops, no need to set
them a second time manually in each driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200515211531.11416-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for imx8qm.
Shengjiu Wang (2):
ASoC: fsl_esai: introduce SoC specific data
ASoC: fsl_esai: Add new compatible string for imx8qm
Changes in v2
- drop the 0002 patch in v1, the dma relate limitation should
be done in dma driver, or define a new DMA API for it.
.../devicetree/bindings/sound/fsl,esai.txt | 1 +
sound/soc/fsl/fsl_esai.c | 46 +++++++++++++++----
2 files changed, 38 insertions(+), 9 deletions(-)
--
2.21.0
The CrOS EC codec driver uses SHA-256 explicitly, and not in a
performance critical manner, so there is really no point in using
the SHASH crypto API here. Let's switch to the library API instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200515100309.20795-1-ardb@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a SoC specific data structure which contains the
differences between the different SoCs.
This makes it easier to support more differences without having
to introduce a new if/else each time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/c188279975bd216995904f9bf8a84c7887b759a0.1589537601.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ALSA controls to configure the PDM clocks.
The clocks need to be configurable to accommodate various microphones
that use clocks for low power/low resolution modes to high power/high
resolution modes.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200514123338.20392-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device tree binding declares the ti,mic-bias-source and the
ti,vref-source properties as u32. The code reads them as u8 which is
incorrect. Since the device tree binding indicates them as u32 the
conde needs to be updated to read u32.
In addition the bias source needs to be shifted 4 bits to
correctly write the register.
driver family")
Fixes: 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200513142807.11802-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When CLOCKING2 is non-volatile register, we need force clear
the WM8962_SYSCLK_ENA bit after reset, for the value in cache
maybe 0 but in hardware it is 1. Otherwise there will issue
as below statement in driver.
/* SYSCLK defaults to on; make sure it is off so we can safely
* write to registers if the device is declocked.
Fixes: c38b608504 ("ASoC: wm8962: set CLOCKING2 as non-volatile register")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1589347835-20554-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The values set by set_dai_fmt() and hw_params() seem to be tailored only
for 32-bit formats. Negotiate the correct ones in hw_params() callback
instead.
This was essentially copied from the OLPC kernel driver and tested to
fix wrong audio output for non-32bit formats. The documentation is not
available.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-10-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
Only turn on the Audio island when it's in use.
This requires keeping track of control register contents instead of
reloading them back from hardware, because they're lost when the power is
off.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-9-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver enables the clocks without preparing them and disables
without unpreparing afterwards. Fix that.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-8-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
The "serial port" it represents is actually a SPI controller -- it's not
clear why would the audio serial interface embed it. We're only using
the mmio_base and clk fields.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-7-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes the driver usable with the mmp_tdma drier via
soc-generic-dmaengine-pcm. This is conditionalized on DT node (support
for DT is added by a later patch).
A custom mmap callback that creates a NC mapping is used instead of the
default WC one, because with write-combining some bytes don't seem to
make it through for reasons unknown to me.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-6-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes things simpler. There's no reason not to just embed the struct
snd_dmaengine_dai_dma_data in struct sspa_priv and do away with an
unnecessary kmalloc(). While at that, we can initialize the
snd_dmaengine_dai_dma_data structures earlier.
Let's also stop offsetting the source/destination of the DMA transfer by
phys_base. Firstly, it's never set and is always zero. Secondly, the
hardware actually ignores it, at least on a MMP2 and MMP3.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-5-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
If an error occurs after the call to 'omap_mcbsp_init()', the reference to
'mcbsp->fclk' must be decremented, as already done in the remove function.
This can be achieved easily by using the devm_ variant of 'clk_get()'
when the reference is taken in 'omap_mcbsp_init()'
This fixes the leak in the probe and has the side effect to simplify both
the error handling path of 'omap_mcbsp_init()' and the remove function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujflausi@ti.com>
Link: https://lore.kernel.org/r/20200512134325.252073-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
With 'ASoC: Intel: Skylake: Fix HDaudio and Dmic' series applied,
warning is no longer true. Remove it and update the description.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200506212114.8502-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 2 issues here:
- if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()'
is a no-op because the 'mop500_dai_links' structure has not been
initialized yet, so the referenced are not decremented
- The reference stored in 'mop500_dai_links[i].codecs' is refcounted
only once in the probe and must be decremented only once.
Fixes: 39013bd60e ("ASoC: Ux500: Dispose of device nodes correctly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200512100705.246349-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200511174647.GA17318@embeddedor
Signed-off-by: Mark Brown <broonie@kernel.org>
It does nothing, because the corresponding bit s not flipped on in .formats
and the audio SRAM DMA engine is not able to handle 20-bit transfers
anyway.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200511210134.1224532-3-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to fix issue described in:
"ASoC: Intel: sst: ipc command timeout"
https://patchwork.kernel.org/patch/11482829/
use readq function, which is meant to read 64 bit values from registers.
On 32 bit platforms it falls back to two readl calls.
Reported-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Brent Lu <brent.lu@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200507133405.32251-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Baytrail has 64 bit registers, so we should use *read64* to read from it
and then use proper mask values to check status.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Brent Lu <brent.lu@intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200507133405.32251-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI BUSIF buffer is possible to overflow or underflow, especially in a
hypervisor environment. If there is no interrupt support, it will eventually
lead to errors in pcm data.
This patch adds overflow and underflow interrupt support for SSI BUSIF buffer.
Reported-by: Chen Li <licheng0822@thundersoft.com>
Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com>
Tested-by: Chen Li <licheng0822@thundersoft.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200512093003.28332-1-giraffesnn123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix to return negative error code -ENOMEM from the IPC init error
handling case instead of 0, as done elsewhere in this function.
Fixes: c16211d622 ("ASoC: SOF: Add Sound Open Firmware driver core")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200509093337.78897-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The wov_hotword_model_put() function has multiple large variables on
its stack, the largest of which is the result of SHASH_DESC_ON_STACK().
In total, this exceeds the warning limit for 32-bit architectures:
sound/soc/codecs/cros_ec_codec.c:776:12: error: stack frame size of 1152 bytes in function 'wov_hotword_model_put' [-Werror,-Wframe-larger-than=]
The function already has a dynamic crypto_alloc_shash() allocation, so
using kmalloc() for the descriptor is correct as well and does not
introduce any additional failure scenarios. With this, the stack usage
of wov_hotword_model_put() gets reduced to 480 bytes in my test
configuration.
Fixes: b6bc07d436 ("ASoC: cros_ec_codec: support WoV")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200507213405.1869430-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_SND_SOC_SOF_BAYTRAIL is not set, gcc warns:
sound/soc/sof/intel/byt.c:85:41: warning: ‘cht_debugfs’ defined but not used [-Wunused-const-variable=]
static const struct snd_sof_debugfs_map cht_debugfs[] = {
^~~~~~~~~~~
Move the variable inside #ifdef
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200507072735.16588-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following warning:
sound/soc/fsl/fsl_asrc.c:157:5: warning:
symbol 'fsl_asrc_request_pair' was not declared. Should it be static?
sound/soc/fsl/fsl_asrc.c:200:6: warning:
symbol 'fsl_asrc_release_pair' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenTao <chentao107@huawei.com>
Link: https://lore.kernel.org/r/20200507022959.183739-1-chentao107@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mt6797_afe_pcm_dev_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200506143009.13368-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simultaneous capture on dmic and headset mic is having
issue with high hw_level being reported.
Issue Can be reproduced by:
arecord -D hw:2,0 -f dat -d 60 /tmp/test0 &
arecord -D hw:2,2 -f dat -d 60 /tmp/test1 &
cat /proc/asound/card2/pcm?c/sub0/status
Actual issue is :
When we open one capture stream on one instance lets say I2S_SP and then
once again if we open other capture on other instance lets say I2S_BT while
first capture is in progress and when we try to read the status of both
running instances by below command cat /proc/asound/card2/pcm?c/sub0/status
we observe that avail_max is being doubled on first opened
capture(I2S_SP in the example).
This is because our previous implementation was like when any instance is
opened it gets initialized in dma_open irrespective of on what instance it
called open.
For example:
First I2S_SP called opened it initializes both SP/BT capture streams
irrespective of on which instance the stream opened.next time I2S_BT
called opened and it initializes both SP/BT this corrupts the behaviour .
So with this patch the stream gets initialized only on specific instance
when ever it gets opened calls hw_params.
This rectifies the issue.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200506102602.140790-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LPASS hardware allows configuring the MI2S SD lines to use
when playing/recording audio. However, at the moment the lpass-cpu
driver has SD0 hard-coded for mono/stereo (or additional fixed
SD lines for more channels).
For weird reasons there seems to be hardware that uses one of the
other SD lines for mono/stereo. For example, some Samsung devices
use an external Speaker amplifier connected to Quaternary MI2S.
For some reason, the SD line for audio playback was connected to
SD1 rather than SD0. (I have no idea why...)
At the moment, the lpass-cpu driver cannot be configured to work
for the Speaker on these devices.
The q6afe driver already allows configuring the MI2S SD lines
through the "qcom,sd-lines" device tree property, but this works
only when routing audio through the ADSP.
This commit adds a very similar configuration for the lpass-cpu driver.
It is now possible to add additional subnodes to the lpass device in
the device tree, to configure the SD lines for playback and/or capture.
E.g. for the Samsung devices mentioned above:
&lpass {
dai@3 {
reg = <MI2S_QUATERNARY>;
qcom,playback-sd-lines = <1>;
};
};
qcom,playback/capture-sd-lines takes a list of SD lines (0-3)
in the same format as the q6afe driver. (The difference here is that
q6afe has separate DAIs for playback/capture, while lpass-cpu has one
for both...)
For backwards compatibility with older device trees, the lpass-cpu driver
defaults to LPAIF_I2SCTL_MODE_8CH if the subnode for a DAI is missing.
This is equivalent to the previous behavior: Up to 8 channels can be
configured, and SD0/QUAT01 will be chosen when setting up a stream
with fewer channels.
This allows the speaker to work on Samsung MSM8916 devices
that use an external speaker amplifier.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200425184657.121991-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
During S3 test, the following error was observed:
[ 726.174237] i2c_designware i2c_designware.0: platform_pm_resume+0x0/0x3d returned 0 after 0 usecs
[ 726.184187] max98373 i2c-MX98373:00: calling max98373_resume+0x0/0x30 [snd_soc_max98373] @ 12698, parent: i2c-11
[ 726.195589] max98373 i2c-MX98373:00: Reset command failed. (ret:-16)
When calling regmap_update_bits(), since map->reg_update_bits is NULL,
_regmap_read() is entered with the following logic:
if (!map->cache_bypass) {
ret = regcache_read(map, reg, val);
if (ret == 0)
return 0;
}
if (map->cache_only)
return -EBUSY;
regcache_read() hits -EINVAL because MAX98373_R2000_SW_RESET is volatile,
as map->cache_only is set by codec suspend, thus -EBUSY is returned.
Fix by moving max98373_reset() after cache_only set to false in max98373_resume().
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1588376661-29799-1-git-send-email-yong.zhi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the ambiguity with GPL-2.0 and use an explicit GPL-2.0-only
tag.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200501145850.15178-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new machine driver to interface with WM8804. The code is based
on settings found in sound/soc/bcm/hifiberry-digi.c in the Raspberry
PI tree.
Tested on Up2 with Digi+ IO (capture+playback) and Digi+ PRO (playback
with two local oscillators supported). The codec is clock master in
both cases.
Capture support has known clocking restrictions: the transmitter needs
to be active for the clock recovery, the "Tx Source" mixer set to
"S/PDIF RX". Playback will only work while capture is active.
When Capture is not desired, or when there is no RX connector, the "Tx
Source" mixer should be set to "AIF"
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200501151625.17820-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the first time update_mute_led() gets called, if channels are already
muted, the temp value equals to led_value as 0, skipping the following
LED setting.
So set led_value to -1 as an uninitialized state, to update the correct
LED status at first time usage.
Fixes: 5d43001ae4 ("ASoC: SOF: acpi led support for switch controls")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200430091139.7003-1-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The series tries to refactor the coding style to follow most conventions.
The 4th patch converts pr_() to dev_().
(https://mailman.alsa-project.org/pipermail/alsa-devel/2020-March/164849.html)
The 6th patch changes the behavior a bit to restore its original intent.
Tzung-Bi Shih (6):
ASoC: rt5682: simplify assertions
ASoC: rt5682: fix space issues
ASoC: rt5682: remove empty default case
ASoC: rt5682: replace message printing from pr_() to dev_()
ASoC: rt5682: remove duplicate rt5682_reset() calls
ASoC: rt5682: remove unwanted btn_type assignment
sound/soc/codecs/rt5682.c | 198 ++++++++++++++++----------------------
1 file changed, 84 insertions(+), 114 deletions(-)
--
2.26.2.303.gf8c07b1a785-goog
This series includes updates in the topology parser for DAIs
and their config.
The first three patches address the problem of sending the DAI
config to the DSP when there are multiple DAIs associated with
a DAI link.
The last patch deals with setting the default trigger order
for all links. Exceptions needed for HDA links are moved to
the DAI link fixup() callback.
Bard Liao (3):
ASoC: SOF: topology: send ipc for all found DAIs in sof_set_dai_config
ASoC: topology: set component dai_index to ipc dai config dai_index
ASoC: SOF: topology: replace sof_link_hda_process by
sof_set_dai_config
randerwang (1):
ASoC: SOF: Intel: change trigger sequence to fix pop noise when
stopping playback on sdw platforms
sound/soc/sof/pcm.c | 12 ++-
sound/soc/sof/topology.c | 167 ++++++++++-----------------------------
2 files changed, 51 insertions(+), 128 deletions(-)
--
2.17.1
The imx8 config keeps causing issues:
WARNING: unmet direct dependencies detected for SND_SOC_SOF_IMX8M
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=m] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_IMX_TOPLEVEL [=y] && IMX_DSP [=n]
Selected by [m]:
- SND_SOC_SOF_IMX_OF [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=m] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_IMX_TOPLEVEL [=y] && SND_SOC_SOF_IMX8M_SUPPORT [=y]
This is complicated by two drivers having dependencies on both
platform specific drivers and the SND_SOC_SOF_OF framework code,
and using an somewhat obscure method to build them the same way
as the SOC_SOF_OF symbol (built-in or modular).
My solution now ensures that the two drivers can only be enabled
when the dependencies are met:
- When the platform specific drivers are built-in, everything is
fine, as SOC_SOF_OF is either =y or =m
- When both are loadable modules, it also works, both for Kconfig
and at runtime
- When the hardware drivers are loadable modules or disabled, and
SOC_SOF_OF=y, prevent the IMX_SOF_OF drivers from being turned on,
as this would be broken.
It seems that this is just an elaborate way to describe two tristate
symbols that have straight dependencies, but maybe I'm missing some
subtle point. It seems to always build for me now.
Fixes: fe57a92c88 ("ASoC: SOF: Add missing dependency on IMX_SCU")
Fixes: afb93d7165 ("ASoC: SOF: imx: Add i.MX8M HW support")
Fixes: cb0312f61c ("ASoC: SOF: imx: fix undefined reference issue")
Fixes: afb93d7165 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200428212752.2901778-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The following dev_err() is intended to print unexpected btn_type.
Removes the unwanted btn_type assignment.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200430082231.151127-7-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the trigger sequence is set to SND_SOC_DPCM_TRIGGER_POST for
SOF. This means FE will be stopped before BE, so BE will consume
invalid data and this generates huge pop noise. This sequence is
introduced for HDA DAI which requires SND_SOC_DPCM_TRIGGER_POST for
some reasons. Now set default trigger sequence to SND_SOC_DPCM_TRIGGER_PRE
for playback with all DAI and fix sequence only for HDA DAI.
Fully tested on Comet Lake for a few cycles.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Clarex Zhou <clarex.zhou@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we send ipc in sof_set_dai_config(), too. Therefore, we can use
sof_set_dai_config() in sof_link_hda_load() just like other link load
functions do.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ipc dai config dai_index is from topology. However, the same dai
config will be applied to all DAIs in the same dai link. We have to
ensure that the ipc dai config's dai_index match to the component's
dai_index.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We may find more than one DAIs in sof_set_dai_config() and we should
send message to DSP for each DAI we found.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427172939.25848-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing the SOF module, the RT286 jack detect
handler will oops if jack detection is not disabled.
Disable the jack in the machine driver remove callback
to prevent this. This fix is only for SOF support and is
not needed for earlier versions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427162953.21107-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If one of the two is a loadable module, the combined driver must
not be built-in:
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_free':
rt5682.c:(.text+0xb34): undefined reference to `sdw_stream_remove_slave'
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_params':
rt5682.c:(.text+0xe78): undefined reference to `sdw_stream_add_slave'
In particular, the soundwire driver must not be built-in if
CONFIG_I2C=m.
Fixes: 5549ea6479 ("ASoC: rt5682: fix unmet dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200428214642.3925004-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ifdefs are hard, and in this driver the suspend/resume functions are
the only callers of some other helpers that trigger a harmless warning
when CONFIG_PM is disabled:
sound/soc/fsl/fsl_easrc.c:1807:12: warning: 'fsl_easrc_get_firmware' defined but not used [-Wunused-function]
1807 | static int fsl_easrc_get_firmware(struct fsl_asrc *easrc)
| ^~~~~~~~~~~~~~~~~~~~~~
sound/soc/fsl/fsl_easrc.c:303:12: warning: 'fsl_easrc_resampler_config' defined but not used [-Wunused-function]
303 | static int fsl_easrc_resampler_config(struct fsl_asrc *easrc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Remove the #ifdef and just mark the callers as __maybe_unused to
suppress the warnings altogether.
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200428212847.2926376-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete unused initialized value, because 'ret' will be assigined
by the function of_alias_get_id().
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200429093823.1372-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements the following features:
- AUX input for recording.
- An input AUX output to SPK/MOUT.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20200429090002.28556-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_get_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eesdssi8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_set_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ftctssid.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_pointer().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87h7x9ssii.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_ack().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87imhpssim.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_get_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87k125ssir.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_set_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfmlssiv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu71ssiz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_shutdown().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8rhssj3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_start().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnbxssj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_remove() to
snd_soc_pcm_dai_remove(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1wdssjc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_probe() to
snd_soc_pcm_dai_probe(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sggtssjg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update soc_pcm_bespoke_trigger() to
snd_soc_pcm_dai_bespoke_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv19ssjm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_trigger() to
snd_soc_pcm_dai_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9lpssjr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_prepare() to
snd_soc_pcm_dai_prepare(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87wo65ssk2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update soc_dai_pcm_new() to
snd_soc_pcm_dai_new(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2qlssk7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC overwrites null_dai_ops to dai->driver->ops if it
was NULL. But, we can remove it if framework always checks
dai->driver->ops when it uses DAI callbacks.
This patch do it, and removes null_dai_ops.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zhb1sskc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At soc-dai.c, it is good idea to indicate error function and
its component name if there was error.
This patch adds soc_dai_err() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rodu74x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series provides the following updtes to the Intel machine driver
Kconfig:
1. The first patch adds the explicit dependency on GPIOLIB when
SND_SOC_DMIC is selected.
2. SND_SOC_SOF_HDA_AUDIO_CODEC is required for using the legacy
HDA codec driver for HDMI support in SOF. The last 3 three patches
make the required changes to account for this.
Libin Yang (3):
ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common
hdmi
ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC condition
ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI condition
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add explicit dependency on GPIOLIB when DMIC is
used
sound/soc/intel/boards/Kconfig | 51 ++++++++++++++-------------
sound/soc/intel/boards/sof_pcm512x.c | 9 -----
sound/soc/intel/boards/sof_sdw.c | 8 -----
sound/soc/intel/boards/sof_sdw_hdmi.c | 7 ----
4 files changed, 26 insertions(+), 49 deletions(-)
--
2.17.1
The machine driver bdw-rt5650 (for Google buddy) supports 2 or 4-channel
recording while other two drivers support only 2-channel recording. HW
constraints are implemented to reflect the hardware limitation on BDW
platform.
Changes since v1:
- Change the patch title.
- Remove the DUAL_CHANNEL and QUAD_CHANNEL macros which are too obvious.
- Follow the naming convertion, using 'bdw_rt5650_' and 'bdw_rt5677_' to
name startup functions.
- Refine the comments in startup functions.
- Redesign the bdw_rt5650_fe_startup() function for readability.
- Add an assignment to initialize runtime->hw.channels_max variable.
Brent Lu (3):
ASoC: bdw-rt5677: add channel constraint
ASoC: bdw-rt5650: add channel constraint
ASoC: broadwell: add channel constraint
sound/soc/intel/boards/bdw-rt5650.c | 29 +++++++++++++++++++++++++++++
sound/soc/intel/boards/bdw-rt5677.c | 26 ++++++++++++++++++++++++++
sound/soc/intel/boards/broadwell.c | 26 ++++++++++++++++++++++++++
3 files changed, 81 insertions(+)
--
2.7.4
BDW boards using this machine driver supports only stereo capture and
playback. Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-4-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BDW boards using this machine driver supports only 2 or 4-channel capture.
Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-3-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BDW boards using this machine driver supports only stereo capture and
playback. Implement a constraint to enforce it.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1588007614-25061-2-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_DMIC depends on GPIOLIB, so let's add the dependency before
selecting SND_SOC_DMIC.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200427165211.23463-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the mic gain registers for channels 2-4.
The incorret register was being set as it was touching the CH1 config
registers.
Fixes: 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200427203608.7031-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
davinci_mcasp_get_dma_type() invokes dma_request_chan(), which returns a
reference of the specified dma_chan object to "chan" with increased
refcnt.
When davinci_mcasp_get_dma_type() returns, local variable "chan" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
davinci_mcasp_get_dma_type(). When chan device is NULL, the function
forgets to decrease the refcnt increased by dma_request_chan(), causing
a refcnt leak.
Fix this issue by calling dma_release_channel() when chan device is
NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1587818916-38730-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Automatically choose DMIC pipeline format configuration depending on
information included in NHLT.
Change the access rights of appropriate kcontrols to read-only in order
to prevent user interference.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-4-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For pipes supporting multiple input/output formats, kcontrol is
created and selection of pipe input and output configuration
is done based on control set.
If more than one configuration is supported, then this patch
allows user to select configuration of choice
using amixer settings.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Signed-off-by: Pavan K S <pavan.k.s@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-3-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add alternative topology binary file name based on used machine driver
and fallback to use this name after failed attempt to load topology file
with name based on NHLT.
This change addresses multiple issues with current mechanism, for
example - there are devices without NHLT table, and that currently
results in tplg_name being empty.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch 955ac624058f: "ASoC: fsl_easrc: Add EASRC ASoC CPU DAI
drivers" from Apr 16, 2020, leads to the following Smatch complaint:
sound/soc/fsl/fsl_easrc.c:1529 fsl_easrc_hw_free()
warn: variable dereferenced before check 'ctx' (see line 1527)
sound/soc/fsl/fsl_easrc.c
1526 struct fsl_asrc_pair *ctx = runtime->private_data;
1527 struct fsl_easrc_ctx_priv *ctx_priv = ctx->private;
^^^^^
Dereference
1528
1529 if (ctx && (ctx_priv->ctx_streams & BIT(substream->stream))) {
^^^
This check is too late, to prevent a NULL dereference.
1530 ctx_priv->ctx_streams &= ~BIT(substream->stream);
1531 fsl_easrc_release_context(ctx);
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/d23c939f1c9eeb3fce34b6c34d44e2d6156f663a.1587799355.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
sound/soc/ti/omap-mcbsp.c:1188:5-11: WARNING: Comparison to bool
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20200426094238.23914-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function mxs_saif_probe() is only called with an
openfirmware platform device. Therefore there is no
need to check that it has an openfirmware node.
Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200420142509.9728-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The number of speaker amplifiers may vary between platforms. UCM
needs to check amp number to include different configuration files.
This patch keeps track of the number of speaker amplifiers and
stores it in components string of the card.
Tested on Comet Lake platforms.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200419183509.4134-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function hi6210_i2s_probe(), devm_clk_get() doesn't return NULL.
Thus use IS_ERR() to validate the return value instead of IS_ERR_OR_NULL().
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200427091145.4268-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable exception interrupt before scheduling tasklet, otherwise if
the tasklet isn't handled immediately, there will be endless xrun
interrupt.
Fixes: 7ccafa2b38 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/a8f2ad955aac9e52587beedc1133b3efbe746895.1587968824.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This became a slightly big pull request, as the accumulated ASoC
fixes are included here. Some highlights:
- Revert of ASoC DAI startup changes that caused regression on some
x86 platforms
- Regression fix in HD-audio power management and driver blacklist
- A collection of ASoC DAPM and topology fixes
- Continued USB-audio fixes and quirks
- Lots of small device-specific fixes
- Rockchip S/PDIF DT stuff update for validation issues
-----BEGIN PGP SIGNATURE-----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=17wz
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a slightly big pull request, as the accumulated ASoC fixes
are included here. Some highlights:
- Revert of ASoC DAI startup changes that caused regression on some
x86 platforms
- Regression fix in HD-audio power management and driver blacklist
- A collection of ASoC DAPM and topology fixes
- Continued USB-audio fixes and quirks
- Lots of small device-specific fixes
- Rockchip S/PDIF DT stuff update for validation issues"
* tag 'sound-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (51 commits)
ALSA: hda: Always use jackpoll helper for jack update after resume
ALSA: hda/realtek - Add new codec supported for ALC245
ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif
ALSA: usb-audio: Add connector notifier delegation
ALSA: usb-audio: Apply async workaround for Scarlett 2i4 2nd gen
ASoC: wm8960: Fix wrong clock after suspend & resume
ALSA: usx2y: Fix potential NULL dereference
ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2
ASoC: wm89xx: Add missing dependency
ASoC: dapm: fixup dapm kcontrol widget
ASoC: rsnd: Fix "status check failed" spam for multi-SSI
ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent
ASoC: meson: gx-card: fix codec-to-codec link setup
ASoC: meson: axg-card: fix codec-to-codec link setup
ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobos
ALSA: hda: Remove ASUS ROG Zenith from the blacklist
ALSA: hda/realtek - Fix unexpected init_amp override
ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devices
ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell
ASoC: stm32: sai: fix sai probe
...
It may be useful to pass the specific model to the generic HDA codec
routines like the legacy HDA driver (snd-hda-intel) allows.
The model name "sofbus" is tricky anyway.
Original proposal: https://lore.kernel.org/alsa-devel/20191203161908.7496-1-perex@perex.cz/
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200424092520.23989-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc-6.5 and earlier show a new warning:
sound/soc/soc-compress.c: In function ‘soc_compr_open’:
sound/soc/soc-compress.c:75:28: warning: ‘component’ is used uninitialized in this function [-Wuninitialized]
struct snd_soc_component *component, *save = NULL;
^~~~~~~~~
Simplest fix is to initialize it to avoid the warning.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/lkml/202004201540.vYPhhYMs%25lkp@intel.com
Link: https://lore.kernel.org/r/20200424005437.3941-1-rong.a.chen@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously CLOCKING2 is set as a volatile register, but cause
issue at suspend & resume, that some bits of CLOCKING2 is not
restored at resume, for example SYSCLK_SRC bits, then the output
clock is wrong.
The volatile property is caused by CLASSD_CLK_DIV bits,
which are controlled by the chip itself. But the datasheet
claims these are read only and protected by the security key,
and they are not read by the driver at all.
So it should be safe to change CLOCKING2 to be non-volatile.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/6d25d5b36d4b9aeb8655b5e947dad52214e34177.1587693523.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If there is a power GPIO provided we control it from DAPM context so there
is no problem with a sleeping GPIO, use the _cansleep() version of the API
to allow this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200422083550.50711-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent batch of SOF changes failed to build on some x86
configurations including an allmodconfig, revert the commits:
e150ef4169 ASoC: SOF: Introduce extended manifest
3710914178 ASoC: SOF: ext_manifest: parse firmware version
7c024b948c ASoC: SOF: ext_manifest: parse compiler version
9e72f13ee5 ASoC: SOF: ext_manifest: parse windows
to fix this.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.
-----BEGIN PGP SIGNATURE-----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=XTzg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6f95oTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GkGB/0X/amUL/B6lXjZky3rjkLP9uewLZls
Q0NsGdhkpX/2ixnaWMJO3eRj1RFT59JEKmU91nBmwh93i+CJ6UzDrGOU7LURu6e/
tRG4KWiqDaHNsKTHUE8wBSfEAeny9FlxQcWmtngb1hQCfcprqheMLQRGB8pXNz3C
Cg28+FcEjXENFeNRxxVe5+Ld8odO7YhSnNj4NjwrVrpVuAfjtU9RumqOA0gZRj+i
vhg8C83mlmBZO1RmKmtHOaCqGVoNUz2wW6+lxyC6DO+v4SxgGP0pcrbrBG1m61Bg
gFmXV9SlWgQUf7khOp1EDW4TQ023zz0evXAxVlKtQeBwRn+aOYDenYy7
=Aeww
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.7-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into asoc-5.7
ASoC: tegra: Fixes for v5.7-rc3
This contains a couple of fixes that are needed to properly reconfigure
the audio clocks on older Tegra devices.
Recent fix for jack detection caused a regression on systems with HDA
audio codec but no HDMI/DP audio via i915 graphics, leading to a kernel
oops at device probe. On these systems, HDA bus instance lookup fails,
as the first ASoC runtime of the card is connected to a dummy codec
(as no HDMI codec is present).
Fixes: 3a24f135e6 ("ASoC: intel/skl/hda - set autosuspend timeout for hda codecs")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200420205431.13070-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new module driver for new ASRC in i.MX8MN, several commits
are added for new property fsl,asrc-format
Shengjiu Wang (7):
ASoC: fsl_asrc: rename asrc_priv to asrc
ASoC: dt-bindings: fsl_asrc: Add new property fsl,asrc-format
ASoC: fsl-asoc-card: Support new property fsl,asrc-format
ASoC: fsl_asrc: Support new property fsl,asrc-format
ASoC: fsl_asrc: Move common definition to fsl_asrc_common
ASoC: dt-bindings: fsl_easrc: Add document for EASRC
ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers
changes in v9
- use lowercase for dt example.
changes in v8
- change get_pair_priv_size to pair_priv_size variable
changes in v7
- updated according to Nicoin's comments.
- add get_pair_priv_size to replace PAIR_PRIVATE_SIZE
changes in v6
- updated according to Nicoin's and Rob's comments.
changes in v5
- Add new property fsl,asrc-format, rather than change fsl,asrc-width
to fsl,asrc-formt.
- code change for above change.
changes in v4
- Add several commit for changing DT binding asrc-width to asrc-format
- rename asrc_priv to asrc
changes in v3
- add new commit "ASoC: fsl_asrc: Change asrc_width to asrc_format"
- modify binding doc to yaml format
- remove fsl_easrc_dma.c, make fsl_asrc_dma.c useable for easrc.
changes in v2
- change i.MX815 to i.MX8MN
- Add changes in Kconfig and Makefile
.../devicetree/bindings/sound/fsl,asrc.txt | 4 +
.../devicetree/bindings/sound/fsl,easrc.yaml | 101 +
sound/soc/fsl/Kconfig | 11 +
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/fsl-asoc-card.c | 24 +-
sound/soc/fsl/fsl_asrc.c | 305 +--
sound/soc/fsl/fsl_asrc.h | 74 +-
sound/soc/fsl/fsl_asrc_common.h | 106 +
sound/soc/fsl/fsl_asrc_dma.c | 54 +-
sound/soc/fsl/fsl_easrc.c | 2114 +++++++++++++++++
sound/soc/fsl/fsl_easrc.h | 651 +++++
11 files changed, 3212 insertions(+), 234 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
create mode 100644 sound/soc/fsl/fsl_asrc_common.h
create mode 100644 sound/soc/fsl/fsl_easrc.c
create mode 100644 sound/soc/fsl/fsl_easrc.h
--
2.21.0
Hi Mark
Current snd_soc_component_driver has compr_ops,
but it is created for ALSA, not for ALSA SoC.
This means it doesn't know the callback is for which component,
thus, each callback needs to get component via lookup function.
It is not good design, and will not work in the future,
because ASoC can have multipul same name component which
current lookup function can't handle.
This v2 patch-set adds new snd_compress_ops and call
callbacks with component.
v1 is here
Link: https://lore.kernel.org/alsa-devel/87blnqpuqp.wl-kuninori.morimoto.gx@renesas.com/
Kuninori Morimoto (8):
ASoC: soc-compress: add snd_compress_ops
ASoC: codec: wm_adsp: use snd_compress_ops
ASoC: uniphier: use snd_compress_ops
ASoC: qcom: q6sp6: use snd_compress_ops
ASoC: intel: atom: use snd_compress_ops
ASoC: sof: use snd_compress_ops
ASoC: sprd: use snd_compress_ops
ASoC: soc-compress: remove snd_compr_ops
include/sound/soc-component.h | 40 ++++++++-
sound/soc/codecs/cs47l15.c | 9 +-
sound/soc/codecs/cs47l24.c | 8 +-
sound/soc/codecs/cs47l35.c | 9 +-
sound/soc/codecs/cs47l85.c | 9 +-
sound/soc/codecs/cs47l90.c | 9 +-
sound/soc/codecs/cs47l92.c | 9 +-
sound/soc/codecs/wm5102.c | 9 +-
sound/soc/codecs/wm5110.c | 8 +-
sound/soc/codecs/wm_adsp.c | 18 ++--
sound/soc/codecs/wm_adsp.h | 18 ++--
.../intel/atom/sst-mfld-platform-compress.c | 43 +++++----
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
sound/soc/intel/atom/sst-mfld-platform.h | 2 +-
sound/soc/qcom/qdsp6/q6asm-dai.c | 51 ++++++-----
sound/soc/soc-compress.c | 89 ++++++++++---------
sound/soc/sof/compress.c | 7 +-
sound/soc/sof/compress.h | 7 +-
sound/soc/sof/pcm.c | 4 +-
sound/soc/sof/sof-priv.h | 2 +-
sound/soc/sprd/sprd-pcm-compress.c | 49 +++++-----
sound/soc/sprd/sprd-pcm-dma.c | 2 +-
sound/soc/sprd/sprd-pcm-dma.h | 2 +-
sound/soc/uniphier/aio-compress.c | 45 ++++++----
sound/soc/uniphier/aio-dma.c | 2 +-
sound/soc/uniphier/aio.h | 2 +-
26 files changed, 265 insertions(+), 190 deletions(-)
--
2.17.1
The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
which consists of a Digital Signal Processor (DSP), several Digital
Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
This driver supports only a tiny subset of the chip's functionality
and possible configurations:
- bypass mode (whole dsp block is bypassed)
- chip's I2S DAI routed directly to/from DACs and microphone
- chip's internal clock is driven by a 12 MHz external crystal
- chip's DAI connected to CPU is I2S, and bit + frame clock master
- chip must be strapped for "host boot": in this mode, firmware will
be provided by this driver.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20200417221341.31428-2-TheSven73@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_compr_ops couldn't care called component,
but now we can care it via snd_compress_ops.
All drivers switched to it.
This patch removes snd_compr_ops.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfmqvdig.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu76vdiv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Upstream code doesn't have sof_compressed_ops.
This patch assume it is implemented at out-of-tree.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8rmvdj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vWe can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnc2vdka.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1wivdkz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sggyvdld.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87tv1evdlu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has compr_ops, and each driver can
have callback via it. But, it is mainly created for ALSA, thus, it
doesn't have "component" as parameter.
Thus, each callback can't know it is called for which component.
Each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name.
--- ALSA SoC ---
...
if (component->driver->compr_ops &&
component->driver->compr_ops->open)
=> return component->driver->compr_ops->open(stream);
...
--- driver ---
static int xxx_open(struct snd_compr_stream *stream)
{
struct snd_soc_pcm_runtime *rtd = stream->private_data;
=> struct snd_soc_component *component = snd_soc_rtdcom_lookup(..);
...
}
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple same driver
name component.
To solve this issue, each callback need to be called with component.
We already have many component driver callbacks.
This patch adds new snd_compress_ops, and call it with "component".
--- ALSA SoC ---
...
if (component->driver->compress_ops->open)
=> return component->driver->compress_ops->open(
component, substream);
~~~~~~~~~
...
--- driver ---
static int xxx_open(struct snd_soc_component *component,
struct snd_compr_stream *stream)
{
=> /* it don't need to use snd_soc_rtdcom_lookup() */
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9luvdmh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like I misread the Kconfig magic and this driver can be compiled
into 32-bit kernels. Add back the hack to extent the range of the
resource_size_t, and include the header with the txx9-specific ioremap
magic for that.
Fixes: acfaaf52eb ("ASoC: txx9: don't work around too small resource_size_t")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
EASRC (Enhanced Asynchronous Sample Rate Converter) is a new IP module
found on i.MX8MN. It is different with old ASRC module.
The primary features for the EASRC are as follows:
- 4 Contexts - groups of channels with an independent time base
- Fully independent and concurrent context control
- Simultaneous processing of up to 32 audio channels
- Programmable filter charachteristics for each context
- 32, 24, 20, and 16-bit fixed point audio sample support
- 32-bit floating point audio sample support
- 8kHz to 384kHz sample rate
- 1/16 to 8x sample rate conversion ratio
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/260d7a9fbddf9fa90760d30095df60a4c25fd0a1.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a new ASRC included in i.MX serial platform, there
are some common definition can be shared with each other.
So move the common definition to a separate header file.
And add fsl_asrc_pair_priv and fsl_asrc_priv for
the variable specific for the module, which can be used
internally.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/7106993928ea9e9720e6b42ec601871103155b1c.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/2be9664768f32982ba4f71e49749f7390096ac9f.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/02f53d5512b9acd3492e2acdd5e0ba3113f18009.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver keeps the audio mclk
enabled.
With the move of PMC clocks from clock driver into pmc driver, audio
mclk enable from clock driver is removed and this should be taken care
of by the audio driver.
tegra_asoc_utils_init() calls tegra_asoc_utils_set_rate() and audio mclk
rate configuration is not needed during init and the rate is actually
set during the ->hw_params() callback.
So, this patch removes tegra_asoc_utils_set_rate() call and just leaves
the audio mclk enabled.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
through Tegra210 and currently Tegra clock driver does the initial
parent configuration for audio mclk and keeps it enabled by default.
With the move of PMC clocks from clock driver into PMC driver, audio
clocks parent configuration can be specified through the device tree
using assigned-clock-parents property and audio mclk control should be
taken care of by the audio driver.
This patch has implementation for parent configuration when default
parent configuration through assigned-clock-parents property is not
specified in the device tree.
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
tegra_asoc_utils uses clk_get() to get the clock and clk_put() to free
them explicitly.
This patch updates it to use device managed resource API devm_clk_get()
so the clock will be automatically released and freed when the device is
unbound and removes tegra_asoc_utils_fini() as its no longer needed.
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After suspend & resume, wm8960_hw_params may be called when
bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking
is not called. But if sample rate is changed at that time, then
the output clock rate will be not correct.
So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params
is not necessary and it causes above issue.
Fixes: 3176bf2d7c ("ASoC: wm8960: update pll and clock setting function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1587468525-27514-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
sound/soc/codecs/wcd934x.c:3881:8-17: WARNING: Comparison of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420042833.19116-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wm8900.o: In function `wm8900_i2c_probe':
wm8900.c:(.text+0xa36): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8900.o: In function `wm8900_modinit':
wm8900.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8900.o: In function `wm8900_exit':
wm8900.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_i2c_probe':
wm8988.c:(.text+0x857): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8988.o: In function `wm8988_modinit':
wm8988.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_exit':
wm8988.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_i2c_probe':
wm8995.c:(.text+0x1c4f): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8995.o: In function `wm8995_modinit':
wm8995.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_exit':
wm8995.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
Add SND_SOC_I2C_AND_SPI dependency to fix this.
Fixes: ea00d95200 ("ASoC: Use imply for SND_SOC_ALL_CODECS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200420125343.20920-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As these two drivers support I2C and SPI, we should add the SND_SOC_I2C_AND_SPI
dependency instead.
Fixes: ce0c97f8a2 ("ASoC: Fix SND_SOC_ALL_CODECS imply SPI fallout")
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20200420202410.47327-3-liwei391@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When I2C=m, SND_SOC_WM8900=y, SND_SOC_WM8988=y, SND_SOC_WM8995=y:
sound/soc/codecs/wm8900.o: In function `wm8900_i2c_probe':
wm8900.c:(.text+0xa16): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8900.o: In function `wm8900_modinit':
wm8900.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8900.o: In function `wm8900_exit':
wm8900.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_i2c_probe':
wm8988.c:(.text+0x86b): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8988.o: In function `wm8988_modinit':
wm8988.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_exit':
wm8988.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_i2c_probe':
wm8995.c:(.text+0x1b5b): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8995.o: In function `wm8995_modinit':
wm8995.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_exit':
wm8995.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
As these drivers support I2C and SPI, we add the SND_SOC_I2C_AND_SPI
dependency to solve it.
Fixes: ea00d95200 ("ASoC: Use imply for SND_SOC_ALL_CODECS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20200420202410.47327-2-liwei391@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix rsnd_dai_call() operations being performed twice for the master SSI
in multi-SSI setups, and fix the rsnd_ssi_stop operation for multi-SSI
setups.
The only visible effect of these issues was some "status check failed"
spam when the rsnd_ssi_stop was called, but overall the code is cleaner
now, and some questionable writes to the SSICR register which did not
lead to any observable misbehaviour but were contrary to the datasheet
are fixed.
Mark:
The first patch kind of reverts my "ASoC: rsnd: Fix parent SSI
start/stop in multi-SSI mode" from a few days ago and achieves the same
effect in a simpler fashion, if you would prefer a clean patch series
based on v5.6 drop me a note.
Greetings,
Matthias
Matthias Blankertz (2):
ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent
ASoC: rsnd: Fix "status check failed" spam for multi-SSI
sound/soc/sh/rcar/ssi.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
base-commit: 15a5760cb8
--
2.26.1
This patchset fixes the problem reported by Marc in this thread [0]
The problem was due to an error in the meson card drivers which had
the "no_pcm" dai_link property set on codec-to-codec links
[0]: https://lore.kernel.org/r/20200417122732.GC5315@sirena.org.uk
Jerome Brunet (2):
ASoC: meson: axg-card: fix codec-to-codec link setup
ASoC: meson: gx-card: fix codec-to-codec link setup
sound/soc/meson/axg-card.c | 4 +++-
sound/soc/meson/gx-card.c | 4 +++-
2 files changed, 6 insertions(+), 2 deletions(-)
--
2.25.2
snd_soc_dapm_kcontrol widget which is created by autodisable control
should contain correct on_val, mask and shift because it is set when the
widget is powered and changed value is applied on registers by following
code in dapm_seq_run_coalesced().
mask |= w->mask << w->shift;
if (w->power)
value |= w->on_val << w->shift;
else
value |= w->off_val << w->shift;
Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent
double shift.
And, on_val in dapm_kcontrol_set_value() is modified to get correct
value in the dapm_seq_run_coalesced().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.
Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the addition of commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
While this error was initially reported the axg-card type, it also applies
to the gx-card type.
While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.
Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.
Fixes: e37a0c313a ("ASoC: meson: gx: add sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the addition of commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.
Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.
Fixes: 0a8f1117a6 ("ASoC: meson: axg-card: add basic codec-to-codec link support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The txx9 sound driver deends on HAS_TXX9_ACLC, which is only set for
three tx49xx SOCs, and thus always has a 64-bit phys_addr_t and
resource_size_t. Instead of poking into ioremap internals to work
around a potentially too small resource_size_t just add a BUILD_BUG_ON
to catch such a case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Update D0 <-> D3 sequence to correctly transition hardware and DSP core
from and to D3. On top of that, set SHIM registers to their recommended
defaults during D0 and D3 proceduces as HW does not reset registers for
us.
Connected to:
[alsa-devel][BUG] bdw-rt5650 DSP boot timeout
https://mailman.alsa-project.org/pipermail/alsa-devel/2019-July/153098.html
Github issue ticket reference:
https://github.com/thesofproject/linux/pull/1842
Tested on:
- BDW-Y RVP with rt286
- SAMUS with rt5677
Proposed solution (both in July 2019 and on github):
'Revert "ASoC: Intel: Work around to fix HW d3 potential crash issue"'
is NAKed as it only covers the problem up and actually brings back the
undefined behavior: some registers (e.g.: APLLSE) are describing LPT
offsets rather than WPT ones. In consequence, during power-transitions
driver issues incorrect writes and leaves the regs of interest alone.
Existing patch - the non-revert - does not resolve the HW D3 issue at
all as it ignores the recommended sequence and does not initialize
hardware registers as expected. And thus, leaving things as are is also
unacceptable.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Ross Zwisler <zwisler@google.com>
Link: https://lore.kernel.org/r/20200330194520.13253-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Major regressions were detected by SOF CI on CherryTrail and Broadwell:
[ 25.705750] SSP2-Codec: ASoC: no backend playback stream
[ 27.923378] SSP2-Codec: ASoC: no users playback at close - state
This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.
For some reason the SSP structures used for SKL+ did provide this
information but legacy platforms didn't.
Fixes: 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200417172014.11760-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes two issues in the snd-soc-rcar driver blocking multichannel
HDMI audio out: The parent SSI in a multi-SSI configuration is not
correctly set up and started, and the SSI->HDMI channel mapping is
wrong.
With these patches, the following device tree snippet can be used on an
r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on
HDMI0:
rsnd_port1: port@1 {
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint1>;
frame-master = <&rsnd_endpoint1>;
playback = <&ssi0 &ssi1 &ssi2 &ssi9>;
};
};
With a capable receiver attached, all of 2ch (stereo), 6ch (e.g. 5.1)
and 8ch audio output should work.
Matthias Blankertz (2):
ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode
ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode
sound/soc/sh/rcar/ssi.c | 8 ++++----
sound/soc/sh/rcar/ssiu.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
base-commit: 7111951b8d
--
2.26.0
If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.
The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.
Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f2 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Long series made of a relatively small changes from multiple SOF
contributors. I didn't find a good way to split this series since it
tracks SOF minor ABI changes (backwards-compatible with older firmware
files) and needs to be kept in-order. Future series should be much
shorter.
The main addition is support for an extended firmware manifest, which
helps retrieve capabilities directly from the firmware file instead of
the current IPC mechanism (still supported but will be deprecated).
The IPC is realigned with the firmware, along with type cleanups, and
the DMIC interface is simplified.
The topology changes are mainly about a multi-cpu DAI fix, a new DC
blocking component, better parsing of tuples and new parameters for
ALH (SoundWire) and HDaudio DAIs. New tokens are also added to clarify
the firmware behavior in the case of dependent pipelines, e.g. for
echo reference generation.
Artur Kloniecki (1):
ASoC: SOF: Add XRUN flags field to struct sof_ipc_buffer.
Bard Liao (5):
ASoC: SOF: topology: fix: handle DAI widget connections properly with
multiple CPU DAI's
ASoC: SOF: align sof_ipc_dai_alh_params with FW
ASoC: SOF: topology: Get ALH rate amd channels from topology
ASoC: SOF: topology: fix: parse hda_tokens to &config->hda
ASoC: SOF: topology: Get HDA rate and channels from topology
Jaska Uimonen (2):
ASoC: SOF: topology: stop parsing when all tokens have been found
ASoC: SOF: topology: handle multiple sets of tuple arrays
Karol Trzcinski (6):
ASoC: SOF: Mark get_ext* function ext_hdr arguments as const
ASoC: SOF: Introduce offset in firmware data
ASoC: SOF: Introduce extended manifest
ASoC: SOF: ext_manifest: parse firmware version
ASoC: SOF: ext_manifest: parse windows
ASoC: SOF: ext_manifest: parse compiler version
Pan Xiuli (6):
ASoC: SOF: add probe support extend data
ASoC: SOF: add debug ABI version
ASoC: SOF: change type char to uint8_t in info.h
ASoC: SOF: change type char to uint8_t in trace.h
ASoC: SOF: change type char to uint8_t in topology.h
ASoC: SOF: make sof_ipc_cc_version to fixed length
Sebastiano Carlucci (1):
ASoC: SOF: topology: Add support for DC Blocker
Seppo Ingalsuo (3):
ASoC: SOF: Intel: Fix typo in header file comment text
ASoC: SOF: Intel: Change DMIC load IPC to fixed length
ASoC: SOF: Intel: Rename deprecated DMIC IPC struct field
include/sound/sof.h | 3 +
include/sound/sof/dai-intel.h | 20 +-
include/sound/sof/info.h | 26 ++-
include/sound/sof/topology.h | 16 +-
include/sound/sof/trace.h | 2 +-
include/uapi/sound/sof/abi.h | 2 +-
include/uapi/sound/sof/ext_manifest.h | 91 ++++++++
include/uapi/sound/sof/tokens.h | 8 +
sound/soc/sof/intel/hda-loader.c | 9 +-
sound/soc/sof/loader.c | 226 ++++++++++++++++--
sound/soc/sof/topology.c | 323 ++++++++++++++++----------
11 files changed, 568 insertions(+), 158 deletions(-)
create mode 100644 include/uapi/sound/sof/ext_manifest.h
base-commit: 83b35f4586
--
2.20.1
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
This patch series adds support for SOF on i.MX8M family. First board
from this family that has a DSP is i.MX8MP.
First 2 patches are trying to fix some compilation issues, the next two
are adding the imx8m support and the last one adds the devicetree
binding.
Changes since v2:
- add reviewed by from Rob to DT patch
- fix ownership for patch 2
Daniel Baluta (3):
ASoC: SOF: imx: Add i.MX8M HW support
ASoC: SOF: Add i.MX8MP device descriptor
dt-bindings: dsp: fsl: Add fsl,imx8mp-dsp entry
Pierre-Louis Bossart (1):
ASoC: SOF: imx: fix undefined reference issue
YueHaibing (1):
ASoC: SOF: imx8: Fix randbuild error
.../devicetree/bindings/dsp/fsl,dsp.yaml | 2 +
sound/soc/sof/imx/Kconfig | 32 +-
sound/soc/sof/imx/Makefile | 2 +
sound/soc/sof/imx/imx8m.c | 279 ++++++++++++++++++
sound/soc/sof/sof-of-dev.c | 14 +
5 files changed, 325 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/sof/imx/imx8m.c
--
2.17.1
Widget's parameters are set in topology and they usually consist of
several different types of tuple arrays like strings, words and bytes.
Here this kind of combination is called a "set".
Lately we've seen more complex widget definitions with multiple
identical sets of tuple arrays. One example is the dmic pdm
configuration, which is currently handled as a special case in token
parsing. This is not scalable for other components with multiple sets.
So add a new function sof_parse_token_sets, which can be used to parse
multiple sets. This function defines the number of sets and an offset to
copy the tokens to correct positions in the destination ipc struct. Old
sof_parse_token function will be a special case of calling
sof_parse_token_sets to parse 1 set with offset 0.
Finally modify the dmic dai link loading to use the new
sof_parse_array_sets to load multiple pdm configs.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Optimize the parsing so that it will stop after all required tokens
have been found as there is no reason to continue after that.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW interface for HDA DAI parameters was extended with information on
sampling rate and channel count in version 3.16. Align kernel header
with the FW change. This change is backwards compatible. Old firmware
will ignore the values.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Items in hda_tokens are for &config->hda. So fix it to the right
object. This error has been harmless as hda_tokens array was empty.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW will need these params for synchronized playback over multiple
DAIs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Sławomir Błauciak <slawomir.blauciak@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch restores the field name to fifo_bits_b since the
legacy firmware compatibility code (for firmware ABI 3.0.0 or earlier)
sets it in sof_link_dmic_load() function in topology.c. Setting of
reserved_2 didn't look appropriate.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch changes the flexible array member pdm[] into a fixed
array of four that is the max. number of stereo PDM controllers
in the current Intel platforms. The change simplifies DMIC DAI
load code and aligns the IPC with other DAI types.
The change is compatible with old and new firmware with similar
change. The ABI minor version is increased due to change in
IPC headers.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the enumerations to support the dc blocker component
from SOF.
Signed-off-by: Sebastiano Carlucci <scarlucci@google.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler version and description can be extracted from the
extended manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The window description can be extracted from the extended manifest
content. This information known at build time does not need to be
provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware version can be extracted from the extended
manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extended manifest is a place to store build time known firmware
metadata, for example firmware version or used compiler description.
Given information is read on host side before firmware startup.
This part of output binary is located as a first structure in binary
file.
Extended manifest should be skipped in firmware loading routine.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes possible to provide extra information to host
before downloading firmware. Extra data should be put
at the beginning of firmware binary.
Exchange is done without any effort on DSP side.
This mechanism will be used in extended manifest.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This pointer can be mark as const to indicate that it is read
only pointer.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, when connecting a DAI widget to the BE CPU DAI, we overwrite
the previous connections. This worked because we only ever had 1 CPU DAI
for each rtd until now. But with multiple CPU DAI's, a new connection
between a BE CPU DAI and the DAI widget should be established without
affecting the previous connections. So, modify the loop to set the
playback/capture widget for the first BE CPU DAI that does not have a
connection established previously.
Fixes: 4a7e26a4d833 ("ASoC: SOF: topology: connect dai widget to all
cpu-dais")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds skeleton support for the audio DSP hardware found on NXP i.MX8M
platform.
There is one notable difference between i.MX8M and i.MX8, which doesn't
allow us to reuse HW support from imx8.c file designed for i.MX8:
On i.MX8M resources (clocks, power, pinctrl, etc) are managed by the
Linux kernel while on i.MX8 resources are managed by a separate
System Controller Firmware. This makes the interface to those resources
completely different.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200409071832.2039-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make.cross ARCH=mips allyesconfig fails with the following error:
sound/soc/sof/sof-of-dev.o:(.data.sof_of_imx8qxp_desc+0x40): undefined
reference to `sof_imx8x_ops'.
This seems to be a Makefile order issue, solve by using the same
structure as for Intel platforms.
Fixes: f9ad754684 ("ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF
dependency")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200409071832.2039-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
when do randconfig like this:
CONFIG_SND_SOC_SOF_IMX8_SUPPORT=y
CONFIG_SND_SOC_SOF_IMX8=y
CONFIG_SND_SOC_SOF_OF=y
CONFIG_IMX_DSP=m
CONFIG_IMX_SCU=y
there is a link error:
sound/soc/sof/imx/imx8.o: In function 'imx8_send_msg':
imx8.c:(.text+0x380): undefined reference to 'imx_dsp_ring_doorbell'
Select IMX_DSP in SND_SOC_SOF_IMX8_SUPPORT to fix this
Fixes: f9ad754684 ("ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200409071832.2039-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Baytrail/Cherrytrail, the Atom/SST driver fails miserably:
[ 9.741953] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[ 9.832992] intel_sst_acpi 80860F28:00: FW sent error response 0x40034
[ 9.833019] intel_sst_acpi 80860F28:00: FW alloc failed ret -4
[ 9.833028] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5
[ 9.833033] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5
[ 9.833037] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed
[ 9.853942] intel_sst_acpi 80860F28:00: FW sent error response 0x40034
[ 9.853974] intel_sst_acpi 80860F28:00: FW alloc failed ret -4
[ 9.853984] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5
[ 9.853990] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5
[ 9.853994] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed
Commit b56be800f1 ("ASoC: soc-pcm: call
snd_soc_dai_startup()/shutdown() once") was the initial problematic
commit.
Commit 1ba616bd1a ("ASoC: soc-dai: fix DAI startup/shutdown sequence")
was an attempt to fix things but it does not work on Baytrail,
reverting all changes seems necessary for now.
Fixes: 1ba616bd1a ("ASoC: soc-dai: fix DAI startup/shutdown sequence")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200415030437.23803-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason, the MI2S DAIs do not have channels_min/max defined.
This means that snd_soc_dai_stream_valid() returns false,
i.e. the DAIs have neither valid playback nor capture stream.
It's quite surprising that this ever worked correctly,
but in 5.7-rc1 this is now failing badly: :)
Commit 0e9cf4c452 ("ASoC: pcm: check if cpu-dai supports a given stream")
introduced a check for snd_soc_dai_stream_valid() before calling
hw_params(), which means that the q6i2s_hw_params() function
was never called, eventually resulting in:
qcom-q6afe aprsvc:q6afe:4:4: no line is assigned
... even though "qcom,sd-lines" is set in the device tree.
Commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
now even avoids creating PCM devices if the stream is not supported,
which means that it is failing even earlier with e.g.:
Primary MI2S: ASoC: no backend playback stream
Avoid all that trouble by adding channels_min/max for the MI2S DAIs.
Fixes: 24c4cbcfac ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function fsl_micfil_probe(), when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant message here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200415044513.17492-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, PCM devices for DPCM are only created based on the
dpcm_playback/capture parameters of the DAI link, without considering
if the CPU/FE DAI is actually capable of playback/capture.
Normally the dpcm_playback/capture parameter should match the
capabilities of the CPU DAI. However, there is no way to set that
parameter from the device tree (e.g. with simple-audio-card or
qcom sound cards). dpcm_playback/capture are always both set to 1.
This causes problems when the CPU DAI does only support playback
or capture. Attemting to open that PCM device with an unsupported
stream type then results in a null pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
... because the DAI playback/capture_widget is not set in that case.
We could add checks there to fix the problem (maybe we should
anyway), but much easier is to not expose the device as
playback/capture in the first place. Attemting to use that
device would always fail later anyway.
Add checks for snd_soc_dai_stream_valid() to the DPCM case
to avoid exposing playback/capture if it is not supported.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200415104928.86091-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.
If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Fabio Estevam <festivem@gmail.com>
Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Decrease the dmesg verbosity to remove unnecessary logs on SoundWire
platforms, and conversely add more information to help the community
and downstream distros with HDaudio/SOF support (DMIC detection and card
instanciation are the most prevalent issues on GitHub).
Pierre-Louis Bossart (3):
ASoC: codecs: rt1308-sdw: reduce verbosity
ASoC: SOF: Intel: hda: reduce verbosity on SoundWire detection
ASoC: SOF: Intel: hda: log number of microphones detected in NHLT
tables
Ranjani Sridharan (1):
ASoC: soc-core: Add dynamic debug logs in soc_dai_link_sanity_check()
sound/soc/codecs/rt1308-sdw.c | 4 ++--
sound/soc/soc-core.c | 18 +++++++++++++++---
sound/soc/sof/intel/hda.c | 10 ++++++----
3 files changed, 23 insertions(+), 9 deletions(-)
base-commit: dd8e871d4e
--
2.20.1
Hello,
Some devices have a 4-pin jack instead of a 3-pin and currently the
WM8903 configuration is hardcoded to the case of 3-pin jack in the
Tegra's ASoC driver. A new device-tree property is required in order
to convey that hardware has a 4-pin jack, and thus, microphone's
detection needs to be done in a different way.
In particular this is needed for Acer A500 tablet device that has
a 4-pin headset jack, otherwise userspace sees headset instead of
headphones and internal microphone isn't enabled by ALSA UCM rule
when it should be. Please review and apply, thanks in advance.
Dmitry Osipenko (2):
dt-bindings: sound: tegra-wm8903: Document new nvidia,headset property
ASoC: tegra: tegra_wm8903: Support nvidia,headset property
.../devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt | 1 +
sound/soc/tegra/tegra_wm8903.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
--
2.25.1
WSA881x works in PDM mode so the wordlength is fixed, which also makes
the only field "WordLength" in DPN_BlockCtrl1 register a read-only.
Writing to this register will throw up errors with Qualcomm Controller.
So use ro_blockctrl1_reg flag to mark this field as read-only so that
core will not write to this register.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200414110347.23829-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All error paths in qcom_snd_parse_of() prints more specific error
messages, so silence the one in apq8096_platform_probe() and
sdm845_snd_platform_probe() to avoid spamming the kernel log.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200406003229.2354631-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the error message into snd_soc_dapm_new_dai from
dapm_connect_dai_pair, since the two copies are almost identical and
are the only callers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200409181209.30130-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/intel/common/soc-acpi-intel-cml-match.c:116:45: warning:
‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=]
static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200410081117.21319-2-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/intel/common/soc-acpi-intel-icl-match.c:90:45: warning:
‘rt1308_2_adr’ defined but not used [-Wunused-const-variable=]
static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
^~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200410081117.21319-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8900.c:449:38: warning:
‘wm8900_dapm_routput2_control’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8900_dapm_routput2_control =
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/wm8900.c:446:38: warning:
‘wm8900_dapm_loutput2_control’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8900_dapm_loutput2_control =
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-5-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8990.c:1309:35: warning: ‘wm8990_regmap’ defined but
not used [-Wunused-const-variable=]
static const struct regmap_config wm8990_regmap = {
^~~~~~~~~~~~~
sound/soc/codecs/wm8990.c:490:38: warning:
‘wm8990_dapm_rxvoice_controls’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8990_dapm_rxvoice_controls[] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/wm8990.c:120:35: warning: ‘out_omix_tlv’ defined but
not used [-Wunused-const-variable=]
static const DECLARE_TLV_DB_SCALE(out_omix_tlv, -600, 0, 0);
^
sound/soc/codecs/wm8990.c:112:35: warning: ‘rec_mix_tlv’ defined but not
used [-Wunused-const-variable=]
static const DECLARE_TLV_DB_SCALE(rec_mix_tlv, -1500, 600, 0);
^
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-4-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8991.c:480:38: warning:
‘wm8991_dapm_rxvoice_controls’ defined but not used
[-Wunused-const-variable=]
static const struct snd_kcontrol_new wm8991_dapm_rxvoice_controls[] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-3-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following gcc warning:
sound/soc/codecs/wm8994.c:736:38: warning: ‘wm1811_snd_controls’ defined
but not used [-Wunused-const-variable=]
static const struct snd_kcontrol_new wm1811_snd_controls[] = {
^~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200407082932.41511-2-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The microphone-jack state needs to be masked in a case of a 4-pin jack
when microphone and ground pins are shorted. Presence of nvidia,headset
tells that WM8903 CODEC driver should mask microphone's status if short
circuit is detected, i.e headphones are inserted.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200330204011.18465-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DMIC endpoint widget and route to make DMIC DAPM routes completed,
to make DAPM Power Management works for DMIC streams.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Init codecs which belong to the same group id on all links.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the support of Intel Elkhart Lake with
Realtek rt5660 codec.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Muhammad Nazif Bin Mohd Borhan <muhammad.nazif.mohd.borhan@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some Lenovo and HP laptops, if both codec driver and SOF driver
are in runtime suspend mode, we plug a headset to the audio jack,
the headphone could be detected but Mic couldn't.
That is because when plugging, the headphone triggers a unsol event
first, and about 0.7s later (on the Lenovo X1 Carbon 7th), the Mic
triggers a unsol event. But if the codec driver enters runtime suspend
within 0.7s, the Mic can't trigger the unsol event.
If we don't set autosuspend_delay to a non-zero value for the hda codec
driver, it will enter runtime suspend immediately after the headphone
triggers the unsol event.
Follow the sequence of legacy hda driver and set a autosuspend delay
of 1sec after card registration (refer to pci/hda/hda_intel.c and
pci/hda/hda_codec.c).
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Clarex Zhou <clarex.zhou@intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dmic16k BE dailink for keyword detection support, FE is
added in topology tplg file.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409185827.16255-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No-one is using cpu_dai/codec_dai/cpu_dais/codec_dais.
Let's remove these from snd_soc_pcm_runtime
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87eetabok4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_new_pcm_runtime() setups rtd, but code is very random.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87ftdqbokh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rtd->cpu_dais/codec_dais are set at soc_new_pcm_runtime().
rtd->num_cpus/codecs should be set there.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87h7y6bol1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a platform device is created successfully but the machine driver
probe fails due to errors with missing components during the card bind
stage, no error is propagated or logged. To help flag such problems,
add a dynamic debug log.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Log the information extracted from NHLT tables to help support users
who report non-functional digital mics with SOF.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to report an error when SoundWire is not detected (not present
in hardware or not exposed in ACPI). Move to dev_dbg to state that
SoundWire is skipped.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These messages are generated at each enumeration, this is
overkill. Move to dev_dbg
[ 86.481709] rt1308 sdw:1:25d:1308:0: rt1308_io_init m_btl_l=0xffee, m_btl_r=0xffff
[ 86.481714] rt1308 sdw:1:25d:1308:0: rt1308_io_init c_btl_l=0x28c, c_btl_r=0x113
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184416.15591-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary parentheses around the right hand side of an assignment
and align the code.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184853.15896-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unneeded temporary local variables and their declarations.
Change suggested by coccinelle.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200409184853.15896-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If probe fails after enabling the regulators regulator_put is called for
each supply without having them disabled before. This produces some
warnings like
WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c
[<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14)
[<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4)
[<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4)
[<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c)
[<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38)
[<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38)
[<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c)
[<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c)
[<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c)
[<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60)
[<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc)
[<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0)
[<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0)
[<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108)
[<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88)
[<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250)
[<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244)
[<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540)
[<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8)
[<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)
Fixes: 3fd6e7d9a1 (ASoC: tas571x: New driver for TI TAS571x power amplifiers)
Signed-off-by: Philipp Puschmann <p.puschmann@pironex.de>
Link: https://lore.kernel.org/r/20200414112754.3365406-1-p.puschmann@pironex.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactoring was done to factor out the linking of DAI widgets into
a helper function, dapm_add_valid_dai_widget. However when this was
done, a regression was introduced for CODEC to CODEC links. It was
over looked that the playback and capture variables persisted across
all CODEC DAIs being processed, which ensured that the special DAI
widget that is added for CODEC to CODEC links was only created once.
This bug causes kernel panics during DAPM shutdown.
To stick with the spirit of the original refactoring whilst fixing the
issue, variables to hold the DAI widgets are added to snd_soc_dai_link.
Furthermore the dapm_add_valid_dai_widget function is renamed to
dapm_connect_dai_pair, the function only adds DAI widgets in the CODEC
to CODEC case and its primary job is to add routes connecting two DAI
widgets, making the original name quite misleading.
Fixes: 6c4b13b51a ("ASoC: Add dapm_add_valid_dai_widget helper")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200409181209.30130-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 450312b640 ("ASoC: soc-core: remove DAI suspend/resume")
removed the DAI side suspend/resume hooks and switched entirely to
component suspend/resume. However the Samsung SoC s3c-i2s-v2 driver was
not updated.
Move the suspend/resume hooks from s3c-i2s-v2.c to s3c2412-i2s.c while
changing dai to component which allows to keep the struct
snd_soc_component_driver const.
This fixes build errors:
sound/soc/samsung/s3c-i2s-v2.c: In function ‘s3c_i2sv2_register_component’:
sound/soc/samsung/s3c-i2s-v2.c:730:9: error: ‘struct snd_soc_dai_driver’ has no member named ‘suspend’
dai_drv->suspend = s3c2412_i2s_suspend;
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 450312b640 ("ASoC: soc-core: remove DAI suspend/resume")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200413124548.28197-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes gathered since the previous update.
* ALSA core:
- Regression fix for OSS PCM emulation
* ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
* Others
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped
from anyone's hands.
-----BEGIN PGP SIGNATURE-----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=mFJY
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
Function soc_tplg_dai_config can fail, check for and handle possible
failure.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function pcm_new_ver can fail, so we should check it's return value and
handle possible error.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function soc_tplg_add_route can propagate error code from callback, we
should check its return value and handle fail in correct way.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Functions soc_tplg_denum_create, soc_tplg_dmixer_create,
soc_tplg_dbytes_create can fail, so their return values should be
checked and error should be propagated.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function soc_tplg_create_tlv can fail, so we should check if it succeded
or not and proceed appropriately.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kstrdup is an allocation function and it can fail, so its return value
should be checked and handled appropriately.
In order to check all cases, we need to modify set_stream_info to return
a value, so check that everything went correctly when doing kstrdup().
Later add proper checks and error handlers.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
randerwang