Add pageblock_aligned() and use it to simplify code.
Link: https://lkml.kernel.org/r/20220907060844.126891-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kswapd_run/stop() will set pgdat->kswapd to NULL, which could race with
kswapd_is_running() in kcompactd(),
kswapd_run/stop() kcompactd()
kswapd_is_running()
pgdat->kswapd // error or nomal ptr
verify pgdat->kswapd
// load non-NULL
pgdat->kswapd
pgdat->kswapd = NULL
task_is_running(pgdat->kswapd)
// Null pointer derefence
KASAN reports the null-ptr-deref shown below,
vmscan: Failed to start kswapd on node 0
...
BUG: KASAN: null-ptr-deref in kcompactd+0x440/0x504
Read of size 8 at addr 0000000000000024 by task kcompactd0/37
CPU: 0 PID: 37 Comm: kcompactd0 Kdump: loaded Tainted: G OE 5.10.60 #1
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x394
show_stack+0x34/0x4c
dump_stack+0x158/0x1e4
__kasan_report+0x138/0x140
kasan_report+0x44/0xdc
__asan_load8+0x94/0xd0
kcompactd+0x440/0x504
kthread+0x1a4/0x1f0
ret_from_fork+0x10/0x18
At present kswapd/kcompactd_run() and kswapd/kcompactd_stop() are protected
by mem_hotplug_begin/done(), but without kcompactd(). There is no need to
involve memory hotplug lock in kcompactd(), so let's add a new mutex to
protect pgdat->kswapd accesses.
Also, because the kcompactd task will check the state of kswapd task, it's
better to call kcompactd_stop() before kswapd_stop() to reduce lock
conflicts.
[akpm@linux-foundation.org: add comments]
Link: https://lkml.kernel.org/r/20220827111959.186838-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly check state of struct memory_block, no need a single function.
Link: https://lkml.kernel.org/r/20220827112043.187028-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use is_zone_movable_page() helper to simplify code.
Link: https://lkml.kernel.org/r/20220726131135.146912-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For now, the feature of hugetlb_free_vmemmap is not compatible with the
feature of memory_hotplug.memmap_on_memory, and hugetlb_free_vmemmap takes
precedence over memory_hotplug.memmap_on_memory. However, someone wants
to make memory_hotplug.memmap_on_memory takes precedence over
hugetlb_free_vmemmap since memmap_on_memory makes it more likely to
succeed memory hotplug in close-to-OOM situations. So the decision of
making hugetlb_free_vmemmap take precedence is not wise and elegant.
The proper approach is to have hugetlb_vmemmap.c do the check whether the
section which the HugeTLB pages belong to can be optimized. If the
section's vmemmap pages are allocated from the added memory block itself,
hugetlb_free_vmemmap should refuse to optimize the vmemmap, otherwise, do
the optimization. Then both kernel parameters are compatible. So this
patch introduces VmemmapSelfHosted to mask any non-optimizable vmemmap
pages. The hugetlb_vmemmap can use this flag to detect if a vmemmap page
can be optimized.
[songmuchun@bytedance.com: walk vmemmap page tables to avoid false-positive]
Link: https://lkml.kernel.org/r/20220620110616.12056-3-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220617135650.74901-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Co-developed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "make hugetlb_optimize_vmemmap compatible with
memmap_on_memory", v3.
This series makes hugetlb_optimize_vmemmap compatible with
memmap_on_memory.
This patch (of 2):
We are almost running out of section flags, only one bit is available in
the worst case (powerpc with 256k pages). However, there are still some
free bits (in ->section_mem_map) on other architectures (e.g. x86_64 has
10 bits available, arm64 has 8 bits available with worst case of 64K
pages). We have hard coded those numbers in code, it is inconvenient to
use those bits on other architectures except powerpc. So transfer those
section flags to enumeration to make it easy to add new section flags in
the future. Also, move SECTION_TAINT_ZONE_DEVICE into the scope of
CONFIG_ZONE_DEVICE to save a bit on non-zone-device case.
[songmuchun@bytedance.com: replace enum with defines per David]
Link: https://lkml.kernel.org/r/20220620110616.12056-2-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220617135650.74901-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220617135650.74901-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We might fail to isolate huge page due to e.g. the page is under
migration which cleared HPageMigratable. We should return errno in this
case rather than always return 1 which could confuse the user, i.e. the
caller might think all of the memory is migrated while the hugetlb page is
left behind. We make the prototype of isolate_huge_page consistent with
isolate_lru_page as suggested by Huang Ying and rename isolate_huge_page
to isolate_hugetlb as suggested by Muchun to improve the readability.
Link: https://lkml.kernel.org/r/20220530113016.16663-4-linmiaohe@huawei.com
Fixes: e8db67eb0d ("mm: migrate: move_pages() supports thp migration")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Huang Ying <ying.huang@intel.com>
Reported-by: kernel test robot <lkp@intel.com> (build error)
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In check_pfn_span(), a 'reason' string is being used to recreate the
caller function name, while printing the warning message. It is really
unnecessary as the warning message could just be printed inside the caller
depending on the return code. Currently there are just two callers for
check_pfn_span() i.e __add_pages() and __remove_pages(). Let's clean this
up.
Link: https://lkml.kernel.org/r/20220531090441.170650-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We must add hugetlb_free_vmemmap=on (or "off") to the boot cmdline and
reboot the server to enable or disable the feature of optimizing vmemmap
pages associated with HugeTLB pages. However, rebooting usually takes a
long time. So add a sysctl to enable or disable the feature at runtime
without rebooting. Why we need this? There are 3 use cases.
1) The feature of minimizing overhead of struct page associated with
each HugeTLB is disabled by default without passing
"hugetlb_free_vmemmap=on" to the boot cmdline. When we (ByteDance)
deliver the servers to the users who want to enable this feature, they
have to configure the grub (change boot cmdline) and reboot the
servers, whereas rebooting usually takes a long time (we have thousands
of servers). It's a very bad experience for the users. So we need a
approach to enable this feature after rebooting. This is a use case in
our practical environment.
2) Some use cases are that HugeTLB pages are allocated 'on the fly'
instead of being pulled from the HugeTLB pool, those workloads would be
affected with this feature enabled. Those workloads could be
identified by the characteristics of they never explicitly allocating
huge pages with 'nr_hugepages' but only set 'nr_overcommit_hugepages'
and then let the pages be allocated from the buddy allocator at fault
time. We can confirm it is a real use case from the commit
099730d674. For those workloads, the page fault time could be ~2x
slower than before. We suspect those users want to disable this
feature if the system has enabled this before and they don't think the
memory savings benefit is enough to make up for the performance drop.
3) If the workload which wants vmemmap pages to be optimized and the
workload which wants to set 'nr_overcommit_hugepages' and does not want
the extera overhead at fault time when the overcommitted pages be
allocated from the buddy allocator are deployed in the same server.
The user could enable this feature and set 'nr_hugepages' and
'nr_overcommit_hugepages', then disable the feature. In this case, the
overcommited HugeTLB pages will not encounter the extra overhead at
fault time.
Link: https://lkml.kernel.org/r/20220512041142.39501-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Optimizing HugeTLB vmemmap pages is not compatible with allocating memmap
on hot added memory. If "hugetlb_free_vmemmap=on" and
memory_hotplug.memmap_on_memory" are both passed on the kernel command
line, optimizing hugetlb pages takes precedence. However, the global
variable memmap_on_memory will still be set to 1, even though we will not
try to allocate memmap on hot added memory.
Also introduce mhp_memmap_on_memory() helper to move the definition of
"memmap_on_memory" to the scope of CONFIG_MHP_MEMMAP_ON_MEMORY. In the
next patch, mhp_memmap_on_memory() will also be exported to be used in
hugetlb_vmemmap.c.
Link: https://lkml.kernel.org/r/20220512041142.39501-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_contig_range() worked at MAX_ORDER_NR_PAGES granularity to avoid
merging pageblocks with different migratetypes. It might unnecessarily
convert extra pageblocks at the beginning and at the end of the range.
Change alloc_contig_range() to work at pageblock granularity.
Special handling is needed for free pages and in-use pages across the
boundaries of the range specified by alloc_contig_range(). Because these=
Partially isolated pages causes free page accounting issues. The free
pages will be split and freed into separate migratetype lists; the in-use=
Pages will be migrated then the freed pages will be handled in the
aforementioned way.
[ziy@nvidia.com: fix deadlock/crash]
Link: https://lkml.kernel.org/r/23A7297E-6C84-4138-A9FE-3598234004E6@nvidia.com
Link: https://lkml.kernel.org/r/20220425143118.2850746-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pgprot.pgprot is non-portable code. It should be replaced by portable
macro pgprot_val.
Link: https://lkml.kernel.org/r/20220426071302.220646-1-liusongtang@huawei.com
Signed-off-by: liusongtang <liusongtang@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "sparse-vmemmap: memory savings for compound devmaps (device-dax)", v9.
This series minimizes 'struct page' overhead by pursuing a similar
approach as Muchun Song series "Free some vmemmap pages of hugetlb page"
(now merged since v5.14), but applied to devmap with @vmemmap_shift
(device-dax).
The vmemmap dedpulication original idea (already used in HugeTLB) is to
reuse/deduplicate tail page vmemmap areas, particular the area which only
describes tail pages. So a vmemmap page describes 64 struct pages, and
the first page for a given ZONE_DEVICE vmemmap would contain the head page
and 63 tail pages. The second vmemmap page would contain only tail pages,
and that's what gets reused across the rest of the subsection/section.
The bigger the page size, the bigger the savings (2M hpage -> save 6
vmemmap pages; 1G hpage -> save 4094 vmemmap pages).
This is done for PMEM /specifically only/ on device-dax configured
namespaces, not fsdax. In other words, a devmap with a @vmemmap_shift.
In terms of savings, per 1Tb of memory, the struct page cost would go down
with compound devmap:
* with 2M pages we lose 4G instead of 16G (0.39% instead of 1.5% of
total memory)
* with 1G pages we lose 40MB instead of 16G (0.0014% instead of 1.5% of
total memory)
The series is mostly summed up by patch 4, and to summarize what the
series does:
Patches 1 - 3: Minor cleanups in preparation for patch 4. Move the very
nice docs of hugetlb_vmemmap.c into a Documentation/vm/ entry.
Patch 4: Patch 4 is the one that takes care of the struct page savings
(also referred to here as tail-page/vmemmap deduplication). Much like
Muchun series, we reuse the second PTE tail page vmemmap areas across a
given @vmemmap_shift On important difference though, is that contrary to
the hugetlbfs series, there's no vmemmap for the area because we are
late-populating it as opposed to remapping a system-ram range. IOW no
freeing of pages of already initialized vmemmap like the case for
hugetlbfs, which greatly simplifies the logic (besides not being
arch-specific). altmap case unchanged and still goes via the
vmemmap_populate(). Also adjust the newly added docs to the device-dax
case.
[Note that device-dax is still a little behind HugeTLB in terms of
savings. I have an additional simple patch that reuses the head vmemmap
page too, as a follow-up. That will double the savings and namespaces
initialization.]
Patch 5: Initialize fewer struct pages depending on the page size with
DRAM backed struct pages -- because fewer pages are unique and most tail
pages (with bigger vmemmap_shift).
NVDIMM namespace bootstrap improves from ~268-358 ms to
~80-110/<1ms on 128G NVDIMMs with 2M and 1G respectivally. And struct
page needed capacity will be 3.8x / 1071x smaller for 2M and 1G
respectivelly. Tested on x86 with 1.5Tb of pmem (including pinning,
and RDMA registration/deregistration scalability with 2M MRs)
This patch (of 5):
In support of using compound pages for devmap mappings, plumb the pgmap
down to the vmemmap_populate implementation. Note that while altmap is
retrievable from pgmap the memory hotplug code passes altmap without
pgmap[*], so both need to be independently plumbed.
So in addition to @altmap, pass @pgmap to sparse section populate
functions namely:
sparse_add_section
section_activate
populate_section_memmap
__populate_section_memmap
Passing @pgmap allows __populate_section_memmap() to both fetch the
vmemmap_shift in which memmap metadata is created for and also to let
sparse-vmemmap fetch pgmap ranges to co-relate to a given section and pick
whether to just reuse tail pages from past onlined sections.
While at it, fix the kdoc for @altmap for sparse_add_section().
[*] https://lore.kernel.org/linux-mm/20210319092635.6214-1-osalvador@suse.de/
Link: https://lkml.kernel.org/r/20220420155310.9712-1-joao.m.martins@oracle.com
Link: https://lkml.kernel.org/r/20220420155310.9712-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The word of "free" is not expressive enough to express the feature of
optimizing vmemmap pages associated with each HugeTLB, rename this keywork
to "optimize". In this patch , cheanup the static key and
hugetlb_free_vmemmap_enabled() to make code more expressive.
Link: https://lkml.kernel.org/r/20220404074652.68024-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
test_pages_in_a_zone() is just another nasty PFN walker that can easily
stumble over ZONE_DEVICE memory ranges falling into the same memory block
as ordinary system RAM: the memmap of parts of these ranges might possibly
be uninitialized. In fact, we observed (on an older kernel) with UBSAN:
UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50
index 7 is out of range for type 'zone [5]'
CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...]
Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019
Call Trace:
dump_stack+0x9a/0xf0
ubsan_epilogue+0x9/0x7a
__ubsan_handle_out_of_bounds+0x13a/0x181
test_pages_in_a_zone+0x3c4/0x500
show_valid_zones+0x1fa/0x380
dev_attr_show+0x43/0xb0
sysfs_kf_seq_show+0x1c5/0x440
seq_read+0x49d/0x1190
vfs_read+0xff/0x300
ksys_read+0xb8/0x170
do_syscall_64+0xa5/0x4b0
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
RIP: 0033:0x7f01f4439b52
We seem to stumble over a memmap that contains a garbage zone id. While
we could try inserting pfn_to_online_page() calls, it will just make
memory offlining slower, because we use test_pages_in_a_zone() to make
sure we're offlining pages that all belong to the same zone.
Let's just get rid of this PFN walker and determine the single zone of a
memory block -- if any -- for early memory blocks during boot. For memory
onlining, we know the single zone already. Let's avoid any additional
memmap scanning and just rely on the zone information available during
boot.
For memory hot(un)plug, we only really care about memory blocks that:
* span a single zone (and, thereby, a single node)
* are completely System RAM (IOW, no holes, no ZONE_DEVICE)
If one of these conditions is not met, we reject memory offlining.
Hotplugged memory blocks (starting out offline), always meet both
conditions.
There are three scenarios to handle:
(1) Memory hot(un)plug
A memory block with zone == NULL cannot be offlined, corresponding to
our previous test_pages_in_a_zone() check.
After successful memory onlining/offlining, we simply set the zone
accordingly.
* Memory onlining: set the zone we just used for onlining
* Memory offlining: set zone = NULL
So a hotplugged memory block starts with zone = NULL. Once memory
onlining is done, we set the proper zone.
(2) Boot memory with !CONFIG_NUMA
We know that there is just a single pgdat, so we simply scan all zones
of that pgdat for an intersection with our memory block PFN range when
adding the memory block. If more than one zone intersects (e.g., DMA and
DMA32 on x86 for the first memory block) we set zone = NULL and
consequently mimic what test_pages_in_a_zone() used to do.
(3) Boot memory with CONFIG_NUMA
At the point in time we create the memory block devices during boot, we
don't know yet which nodes *actually* span a memory block. While we could
scan all zones of all nodes for intersections, overlapping nodes complicate
the situation and scanning all nodes is possibly expensive. But that
problem has already been solved by the code that sets the node of a memory
block and creates the link in the sysfs --
do_register_memory_block_under_node().
So, we hook into the code that sets the node id for a memory block. If
we already have a different node id set for the memory block, we know
that multiple nodes *actually* have PFNs falling into our memory block:
we set zone = NULL and consequently mimic what test_pages_in_a_zone() used
to do. If there is no node id set, we do the same as (2) for the given
node.
Note that the call order in driver_init() is:
-> memory_dev_init(): create memory block devices
-> node_dev_init(): link memory block devices to the node and set the
node id
So in summary, we detect if there is a single zone responsible for this
memory block and we consequently store the zone in that case in the
memory block, updating it during memory onlining/offlining.
Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Rafael Parra <rparrazo@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rafael Parra <rparrazo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "drivers/base/memory: determine and store zone for single-zone memory blocks", v2.
I remember talking to Michal in the past about removing
test_pages_in_a_zone(), which we use for:
* verifying that a memory block we intend to offline is really only managed
by a single zone. We don't support offlining of memory blocks that are
managed by multiple zones (e.g., multiple nodes, DMA and DMA32)
* exposing that zone to user space via
/sys/devices/system/memory/memory*/valid_zones
Now that I identified some more cases where test_pages_in_a_zone() might
go wrong, and we received an UBSAN report (see patch #3), let's get rid of
this PFN walker.
So instead of detecting the zone at runtime with test_pages_in_a_zone() by
scanning the memmap, let's determine and remember for each memory block if
it's managed by a single zone. The stored zone can then be used for the
above two cases, avoiding a manual lookup using test_pages_in_a_zone().
This avoids eventually stumbling over uninitialized memmaps in corner
cases, especially when ZONE_DEVICE ranges partly fall into memory block
(that are responsible for managing System RAM).
Handling memory onlining is easy, because we online to exactly one zone.
Handling boot memory is more tricky, because we want to avoid scanning all
zones of all nodes to detect possible zones that overlap with the physical
memory region of interest. Fortunately, we already have code that
determines the applicable nodes for a memory block, to create sysfs links
-- we'll hook into that.
Patch #1 is a simple cleanup I had laying around for a longer time.
Patch #2 contains the main logic to remove test_pages_in_a_zone() and
further details.
[1] https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com
[2] https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
This patch (of 2):
Let's adjust the stale terminology, making it match
unregister_memory_block_under_nodes() and
do_register_memory_block_under_node(). We're dealing with memory block
devices, which span 1..X memory sections.
Link: https://lkml.kernel.org/r/20220210184359.235565-1-david@redhat.com
Link: https://lkml.kernel.org/r/20220210184359.235565-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rafael Parra <rparrazo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's misplaced since commit 7960509329 ("mm, memory_hotplug: print
reason for the offlining failure"). Move it to the right place.
Link: https://lkml.kernel.org/r/20220207133643.23427-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can use helper macro node_spanned_pages to check whether node spans
pages. And we can change the parameter of check_cpu_on_node to nid as
that's what it really cares. Thus we can further get rid of the local
variable pgdat and improve the readability a bit.
Link: https://lkml.kernel.org/r/20220207133643.23427-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If zid reaches ZONE_NORMAL, the caller will always get the NORMAL zone no
matter what zone_intersects() returns. So we can save some possible cpu
cycles by avoid calling zone_intersects() for ZONE_NORMAL.
Link: https://lkml.kernel.org/r/20220207133643.23427-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "A few cleanup patches around memory_hotplug".
This series contains a few patches to fix obsolete and misplaced comments,
clean up the try_offline_node function and so on.
This patch (of 4):
Since commit f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded
memory to zones until online"), there is no need to pass in the zone.
[akpm@linux-foundation.org: remove the comment altogether, per David]
Link: https://lkml.kernel.org/r/20220207133643.23427-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220207133643.23427-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a !node_online node is brought up it needs a hotplug specific
initialization because the node could be either uninitialized yet or it
could have been recycled after previous hotremove. hotadd_init_pgdat is
responsible for that.
Internal pgdat state is initialized at two places currently
- hotadd_init_pgdat
- free_area_init_core_hotplug
There is no real clear cut what should go where but this patch's chosen to
move the whole internal state initialization into
free_area_init_core_hotplug. hotadd_init_pgdat is still responsible to
pull all the parts together - most notably to initialize zonelists because
those depend on the overall topology.
This patch doesn't introduce any functional change.
Link: https://lkml.kernel.org/r/20220127085305.20890-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to "mm: handle uninitialized numa nodes gracefully" memory hotplug
used to allocate pgdat when memory has been added to a node
(hotadd_init_pgdat) arch_free_nodedata has been only used in the failure
path because once the pgdat is exported (to be visible by NODA_DATA(nid))
it cannot really be freed because there is no synchronization available
for that.
pgdat is allocated for each possible nodes now so the memory hotplug
doesn't need to do the ever use arch_free_nodedata so drop it.
This patch doesn't introduce any functional change.
Link: https://lkml.kernel.org/r/20220127085305.20890-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have had several reports [1][2][3] that page allocator blows up when an
allocation from a possible node is requested. The underlying reason is
that NODE_DATA for the specific node is not allocated.
NUMA specific initialization is arch specific and it can vary a lot. E.g.
x86 tries to initialize all nodes that have some cpu affinity (see
init_cpu_to_node) but this can be insufficient because the node might be
cpuless for example.
One way to address this problem would be to check for !node_online nodes
when trying to get a zonelist and silently fall back to another node.
That is unfortunately adding a branch into allocator hot path and it
doesn't handle any other potential NODE_DATA users.
This patch takes a different approach (following a lead of [3]) and it pre
allocates pgdat for all possible nodes in an arch indipendent code -
free_area_init. All uninitialized nodes are treated as memoryless nodes.
node_state of the node is not changed because that would lead to other
side effects - e.g. sysfs representation of such a node and from past
discussions [4] it is known that some tools might have problems digesting
that.
Newly allocated pgdat only gets a minimal initialization and the rest of
the work is expected to be done by the memory hotplug - hotadd_new_pgdat
(renamed to hotadd_init_pgdat).
generic_alloc_nodedata is changed to use the memblock allocator because
neither page nor slab allocators are available at the stage when all
pgdats are allocated. Hotplug doesn't allocate pgdat anymore so we can
use the early boot allocator. The only arch specific implementation is
ia64 and that is changed to use the early allocator as well.
[1] http://lkml.kernel.org/r/20211101201312.11589-1-amakhalov@vmware.com
[2] http://lkml.kernel.org/r/20211207224013.880775-1-npache@redhat.com
[3] http://lkml.kernel.org/r/20190114082416.30939-1-mhocko@kernel.org
[4] http://lkml.kernel.org/r/20200428093836.27190-1-srikar@linux.vnet.ibm.com
[akpm@linux-foundation.org: replace comment, per Mike]
Link: https://lkml.kernel.org/r/Yfe7RBeLCijnWBON@dhcp22.suse.cz
Reported-by: Alexey Makhalov <amakhalov@vmware.com>
Tested-by: Alexey Makhalov <amakhalov@vmware.com>
Reported-by: Nico Pache <npache@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Tested-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page_fixed_fake_head() is used throughout memory management and the
conditional check requires checking a global variable, although the
overhead of this check may be small, it increases when the memory cache
comes under pressure. Also, the global variable will not be modified
after system boot, so it is very appropriate to use static key machanism.
Link: https://lkml.kernel.org/r/20211101031651.75851-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Cc: Chen Huang <chenhuang5@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cgroup.h (therefore swap.h, therefore half of the universe)
includes bpf.h which in turn includes module.h and slab.h.
Since we're about to get rid of that dependency we need
to clean things up.
v2: drop the cpu.h include from cacheinfo.h, it's not necessary
and it makes riscv sensitive to ordering of include files.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1
Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion
Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org
We want to specify flags when hotplugging memory. Let's prepare to pass
flags to memblock_add_node() by adjusting all existing users.
Note that when hotplugging memory the system is already up and running
and we might have concurrent memblock users: for example, while we're
hotplugging memory, kexec_file code might search for suitable memory
regions to place kexec images. It's important to add the memory
directly to memblock via a single call with the right flags, instead of
adding the memory first and apply flags later: otherwise, concurrent
memblock users might temporarily stumble over memblocks with wrong
flags, which will be important in a follow-up patch that introduces a
new flag to properly handle add_memory_driver_managed().
Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.com
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shahab Vahedi <shahab@synopsys.com> [arch/arc]
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jianyong Wu <Jianyong.Wu@arm.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/memory_hotplug: full support for add_memory_driver_managed() with CONFIG_ARCH_KEEP_MEMBLOCK", v2.
Architectures that require CONFIG_ARCH_KEEP_MEMBLOCK=y, such as arm64,
don't cleanly support add_memory_driver_managed() yet. Most
prominently, kexec_file can still end up placing kexec images on such
driver-managed memory, resulting in undesired behavior, for example,
having kexec images located on memory not part of the firmware-provided
memory map.
Teaching kexec to not place images on driver-managed memory is
especially relevant for virtio-mem. Details can be found in commit
7b7b27214b ("mm/memory_hotplug: introduce
add_memory_driver_managed()").
Extend memblock with a new flag and set it from memory hotplug code when
applicable. This is required to fully support virtio-mem on arm64,
making also kexec_file behave like on x86-64.
This patch (of 2):
If memblock_add_node() fails, we're most probably running out of memory.
While this is unlikely to happen, it can happen and having memory added
without a memblock can be problematic for architectures that use
memblock to detect valid memory. Let's fail in a nice way instead of
silently ignoring the error.
Link: https://lkml.kernel.org/r/20211004093605.5830-1-david@redhat.com
Link: https://lkml.kernel.org/r/20211004093605.5830-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Jianyong Wu <Jianyong.Wu@arm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shahab Vahedi <shahab@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't support CONFIG_MEMORY_HOTPLUG on 32 bit and consequently not
HIGHMEM. Let's remove any leftover code -- including the unused
"status_change_nid_high" field part of the memory notifier.
Link: https://lkml.kernel.org/r/20210929143600.49379-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for
CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use
CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE.
Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
online_policy_to_str is only used in memory_hotplug.c and should be
defined as static.
Link: https://lkml.kernel.org/r/20210913024534.26161-1-tangyizhou@huawei.com
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Patch series "Cleanup and fixups for memory hotplug".
This series contains cleanup to use helper function to simplify the code.
Also we fix some potential bugs. More details can be found in the
respective changelogs.
This patch (of 3):
Use helper zone_is_zone_device() to simplify the code and remove some
explicit CONFIG_ZONE_DEVICE codes.
Link: https://lkml.kernel.org/r/20210821094246.10149-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210821094246.10149-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the "auto-movable" online policy does not allow for hotplugged
KERNEL (ZONE_NORMAL) memory to increase the amount of MOVABLE memory we
can have, primarily, because there is no coordiantion across memory
devices and we don't want to create zone-imbalances accidentially when
unplugging memory.
However, within a single memory device it's different. Let's allow for
KERNEL memory within a dynamic memory group to allow for more MOVABLE
within the same memory group. The only thing we have to take care of is
that the managing driver avoids zone imbalances by unplugging MOVABLE
memory first, otherwise there can be corner cases where unplug of memory
could result in (accidential) zone imbalances.
virtio-mem is the only user of dynamic memory groups and recently added
support for prioritizing unplug of ZONE_MOVABLE over ZONE_NORMAL, so we
don't need a new toggle to enable it for dynamic memory groups.
We limit this handling to dynamic memory groups, because:
* We want to keep the runtime overhead for collecting stats when
onlining a single memory block small. We tend to have only a handful of
dynamic memory groups, but we can have quite some static memory groups
(e.g., 256 DIMMs).
* It doesn't make too much sense for static memory groups, as we try
onlining all applicable memory blocks either completely to ZONE_MOVABLE
or not. In ordinary operation, we won't have a mixture of zones within
a static memory group.
When adding memory to a dynamic memory group, we'll first online memory to
ZONE_MOVABLE as long as early KERNEL memory allows for it. Then, we'll
online the next unit(s) to ZONE_NORMAL, until we can online the next
unit(s) to ZONE_MOVABLE.
For a simple virtio-mem device with a MOVABLE:KERNEL ratio of 3:1, it will
result in a layout like:
[M][M][M][M][M][M][M][M][N][M][M][M][N][M][M][M]...
^ movable memory due to early kernel memory
^ allows for more movable memory ...
^-----^ ... here
^ allows for more movable memory ...
^-----^ ... here
While the created layout is sub-optimal when it comes to contiguous zones,
it gives us the maximum flexibility when dynamically growing/shrinking a
device; we can grow small VMs really big in small steps, and still shrink
reliably to e.g., 1/4 of the maximum VM size in this example, removing
full memory blocks along with meta data more reliably.
Mark dynamic memory groups in the xarray such that we can efficiently
iterate over them when collecting stats. In usual setups, we have one
virtio-mem device per NUMA node, and usually only a small number of NUMA
nodes.
Note: for now, there seems to be no compelling reason to make this
behavior configurable.
Link: https://lkml.kernel.org/r/20210806124715.17090-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use memory groups to improve our "auto-movable" onlining policy:
1. For static memory groups (e.g., a DIMM), online a memory block MOVABLE
only if all other memory blocks in the group are either MOVABLE or could
be onlined MOVABLE. A DIMM will either be MOVABLE or not, not a mixture.
2. For dynamic memory groups (e.g., a virtio-mem device), online a
memory block MOVABLE only if all other memory blocks inside the
current unit are either MOVABLE or could be onlined MOVABLE. For a
virtio-mem device with a device block size with 512 MiB, all 128 MiB
memory blocks wihin a 512 MiB unit will either be MOVABLE or not, not
a mixture.
We have to pass the memory group to zone_for_pfn_range() to take the
memory group into account.
Note: for now, there seems to be no compelling reason to make this
behavior configurable.
Link: https://lkml.kernel.org/r/20210806124715.17090-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's track all present pages in each memory group. Especially, track
memory present in ZONE_MOVABLE and memory present in one of the kernel
zones (which really only is ZONE_NORMAL right now as memory groups only
apply to hotplugged memory) separately within a memory group, to prepare
for making smart auto-online decision for individual memory blocks within
a memory group based on group statistics.
Link: https://lkml.kernel.org/r/20210806124715.17090-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In our "auto-movable" memory onlining policy, we want to make decisions
across memory blocks of a single memory device. Examples of memory
devices include ACPI memory devices (in the simplest case a single DIMM)
and virtio-mem. For now, we don't have a connection between a single
memory block device and the real memory device. Each memory device
consists of 1..X memory block devices.
Let's logically group memory blocks belonging to the same memory device in
"memory groups". Memory groups can span multiple physical ranges and a
memory group itself does not contain any information regarding physical
ranges, only properties (e.g., "max_pages") necessary for improved memory
onlining.
Introduce two memory group types:
1) Static memory group: E.g., a single ACPI memory device, consisting
of 1..X memory resources. A memory group consists of 1..Y memory
blocks. The whole group is added/removed in one go. If any part
cannot get offlined, the whole group cannot be removed.
2) Dynamic memory group: E.g., a single virtio-mem device. Memory is
dynamically added/removed in a fixed granularity, called a "unit",
consisting of 1..X memory blocks. A unit is added/removed in one go.
If any part of a unit cannot get offlined, the whole unit cannot be
removed.
In case of 1) we usually want either all memory managed by ZONE_MOVABLE or
none. In case of 2) we usually want to have as many units as possible
managed by ZONE_MOVABLE. We want a single unit to be of the same type.
For now, memory groups are an internal concept that is not exposed to user
space; we might want to change that in the future, though.
add_memory() users can specify a mgid instead of a nid when passing the
MHP_NID_IS_MGID flag.
Link: https://lkml.kernel.org/r/20210806124715.17090-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When onlining without specifying a zone (using "online" instead of
"online_kernel" or "online_movable"), we currently select a zone such that
existing zones are kept contiguous. This online policy made sense in the
past, where contiguous zones where required.
We'd like to implement smarter policies, however:
* User space has little insight. As one example, it has no idea which
memory blocks logically belong together (e.g., to a DIMM or to a
virtio-mem device).
* Drivers that add memory in separate memory blocks, especially
virtio-mem, want memory to get onlined right from the kernel when
adding.
So we really want to have onlining to differing zones managed in the
kernel, configured by user space.
We see more and more cases where we might eventually hotplug a lot of
memory in the future (e.g., eventually grow a 2 GiB VM to 64 GiB),
however:
* Resizing happens dynamically, in smaller steps in both directions
(e.g., 2 GiB -> 8 GiB -> 4 GiB -> 16 GiB ...)
* We still want as much flexibility as possible, especially,
hotunplugging as much memory as possible later.
We can really only use "online_movable" if we know that the amount of
memory we are going to hotplug upfront, and we know that it won't result
in a zone imbalance. So in our example, a 2 GiB VM that could grow to 64
GiB could currently not use "online_movable", and instead, "online_kernel"
would have to be used, resulting in worse (no) memory hotunplug
reliability.
Let's add a new "auto-movable" online policy that considers the current
zone ratios (global, per-node) to determine, whether we a memory block can
be onlined to ZONE_MOVABLE:
MOVABLE : KERNEL
However, internally we'll only consider the following ratio for now:
MOVABLE : KERNEL_EARLY
For now, we don't allow for hotplugged KERNEL memory to allow for more
MOVABLE memory, because there is no coordination across memory devices.
In follow-up patches, we will allow for more KERNEL memory within a memory
device to allow for more MOVABLE memory within the same memory device --
which only makes sense for special memory device types.
We base our calculation on "present pages", see the code comments for
details. Hotplugged memory will get online to ZONE_MOVABLE if the
configured ratio allows for it. Depending on the setup, this can result
in fragmented zones, which can make compaction slower and dynamic
allocation of gigantic pages when not using CMA less reliable (... which
is already pretty unreliable).
The old policy will be the default and called "contig-zones". In
follow-up patches, our new policy will use additional information, such as
memory groups, to make even smarter decisions across memory blocks.
Configuration:
* memory_hotplug.online_policy is used to switch between both polices
and defaults to "contig-zones".
* memory_hotplug.auto_movable_ratio defines the maximum ratio is in
percent and defaults to "301" -- allowing e.g., most 8 GiB machines to
grow to 32 GiB and have all hotplugged memory in ZONE_MOVABLE. The
additional percent accounts for a handful of lost present pages (e.g.,
firmware allocations). User space is expected to adjust this ratio when
enabling the new "auto-movable" policy, though.
* memory_hotplug.auto_movable_numa_aware considers numa node stats in
addition to global stats, and defaults to "true".
Note: just like the old policy, the new policy won't take things like
unmovable huge pages or memory ballooning that doesn't support balloon
compaction into account. User space has to configure onlining
accordingly.
Link: https://lkml.kernel.org/r/20210806124715.17090-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/memory_hotplug: "auto-movable" online policy and memory groups", v3.
I. Goal
The goal of this series is improving in-kernel auto-online support. It
tackles the fundamental problems that:
1) We can create zone imbalances when onlining all memory blindly to
ZONE_MOVABLE, in the worst case crashing the system. We have to know
upfront how much memory we are going to hotplug such that we can
safely enable auto-onlining of all hotplugged memory to ZONE_MOVABLE
via "online_movable". This is far from practical and only applicable in
limited setups -- like inside VMs under the RHV/oVirt hypervisor which
will never hotplug more than 3 times the boot memory (and the
limitation is only in place due to the Linux limitation).
2) We see more setups that implement dynamic VM resizing, hot(un)plugging
memory to resize VM memory. In these setups, we might hotplug a lot of
memory, but it might happen in various small steps in both directions
(e.g., 2 GiB -> 8 GiB -> 4 GiB -> 16 GiB ...). virtio-mem is the
primary driver of this upstream right now, performing such dynamic
resizing NUMA-aware via multiple virtio-mem devices.
Onlining all hotplugged memory to ZONE_NORMAL means we basically have
no hotunplug guarantees. Onlining all to ZONE_MOVABLE means we can
easily run into zone imbalances when growing a VM. We want a mixture,
and we want as much memory as reasonable/configured in ZONE_MOVABLE.
Details regarding zone imbalances can be found at [1].
3) Memory devices consist of 1..X memory block devices, however, the
kernel doesn't really track the relationship. Consequently, also user
space has no idea. We want to make per-device decisions.
As one example, for memory hotunplug it doesn't make sense to use a
mixture of zones within a single DIMM: we want all MOVABLE if
possible, otherwise all !MOVABLE, because any !MOVABLE part will easily
block the whole DIMM from getting hotunplugged.
As another example, virtio-mem operates on individual units that span
1..X memory blocks. Similar to a DIMM, we want a unit to either be all
MOVABLE or !MOVABLE. A "unit" can be thought of like a DIMM, however,
all units of a virtio-mem device logically belong together and are
managed (added/removed) by a single driver. We want as much memory of
a virtio-mem device to be MOVABLE as possible.
4) We want memory onlining to be done right from the kernel while adding
memory, not triggered by user space via udev rules; for example, this
is reqired for fast memory hotplug for drivers that add individual
memory blocks, like virito-mem. We want a way to configure a policy in
the kernel and avoid implementing advanced policies in user space.
The auto-onlining support we have in the kernel is not sufficient. All we
have is a) online everything MOVABLE (online_movable) b) online everything
!MOVABLE (online_kernel) c) keep zones contiguous (online). This series
allows configuring c) to mean instead "online movable if possible
according to the coniguration, driven by a maximum MOVABLE:KERNEL ratio"
-- a new onlining policy.
II. Approach
This series does 3 things:
1) Introduces the "auto-movable" online policy that initially operates on
individual memory blocks only. It uses a maximum MOVABLE:KERNEL ratio
to make a decision whether a memory block will be onlined to
ZONE_MOVABLE or not. However, in the basic form, hotplugged KERNEL
memory does not allow for more MOVABLE memory (details in the
patches). CMA memory is treated like MOVABLE memory.
2) Introduces static (e.g., DIMM) and dynamic (e.g., virtio-mem) memory
groups and uses group information to make decisions in the
"auto-movable" online policy across memory blocks of a single memory
device (modeled as memory group). More details can be found in patch
#3 or in the DIMM example below.
3) Maximizes ZONE_MOVABLE memory within dynamic memory groups, by
allowing ZONE_NORMAL memory within a dynamic memory group to allow for
more ZONE_MOVABLE memory within the same memory group. The target use
case is dynamic VM resizing using virtio-mem. See the virtio-mem
example below.
I remember that the basic idea of using a ratio to implement a policy in
the kernel was once mentioned by Vitaly Kuznetsov, but I might be wrong (I
lost the pointer to that discussion).
For me, the main use case is using it along with virtio-mem (and DIMMs /
ppc64 dlpar where necessary) for dynamic resizing of VMs, increasing the
amount of memory we can hotunplug reliably again if we might eventually
hotplug a lot of memory to a VM.
III. Target Usage
The target usage will be:
1) Linux boots with "mhp_default_online_type=offline"
2) User space (e.g., systemd unit) configures memory onlining (according
to a config file and system properties), for example:
* Setting memory_hotplug.online_policy=auto-movable
* Setting memory_hotplug.auto_movable_ratio=301
* Setting memory_hotplug.auto_movable_numa_aware=true
3) User space enabled auto onlining via "echo online >
/sys/devices/system/memory/auto_online_blocks"
4) User space triggers manual onlining of all already-offline memory
blocks (go over offline memory blocks and set them to "online")
IV. Example
For DIMMs, hotplugging 4 GiB DIMMs to a 4 GiB VM with a configured ratio of
301% results in the following layout:
Memory block 0-15: DMA32 (early)
Memory block 32-47: Normal (early)
Memory block 48-79: Movable (DIMM 0)
Memory block 80-111: Movable (DIMM 1)
Memory block 112-143: Movable (DIMM 2)
Memory block 144-275: Normal (DIMM 3)
Memory block 176-207: Normal (DIMM 4)
... all Normal
(-> hotplugged Normal memory does not allow for more Movable memory)
For virtio-mem, using a simple, single virtio-mem device with a 4 GiB VM
will result in the following layout:
Memory block 0-15: DMA32 (early)
Memory block 32-47: Normal (early)
Memory block 48-143: Movable (virtio-mem, first 12 GiB)
Memory block 144: Normal (virtio-mem, next 128 MiB)
Memory block 145-147: Movable (virtio-mem, next 384 MiB)
Memory block 148: Normal (virtio-mem, next 128 MiB)
Memory block 149-151: Movable (virtio-mem, next 384 MiB)
... Normal/Movable mixture as above
(-> hotplugged Normal memory allows for more Movable memory within
the same device)
Which gives us maximum flexibility when dynamically growing/shrinking a
VM in smaller steps.
V. Doc Update
I'll update the memory-hotplug.rst documentation, once the overhaul [1] is
usptream. Until then, details can be found in patch #2.
VI. Future Work
1) Use memory groups for ppc64 dlpar
2) Being able to specify a portion of (early) kernel memory that will be
excluded from the ratio. Like "128 MiB globally/per node" are excluded.
This might be helpful when starting VMs with extremely small memory
footprint (e.g., 128 MiB) and hotplugging memory later -- not wanting
the first hotplugged units getting onlined to ZONE_MOVABLE. One
alternative would be a trigger to not consider ZONE_DMA memory
in the ratio. We'll have to see if this is really rrequired.
3) Indicate to user space that MOVABLE might be a bad idea -- especially
relevant when memory ballooning without support for balloon compaction
is active.
This patch (of 9):
For implementing a new memory onlining policy, which determines when to
online memory blocks to ZONE_MOVABLE semi-automatically, we need the
number of present early (boot) pages -- present pages excluding hotplugged
pages. Let's track these pages per zone.
Pass a page instead of the zone to adjust_present_page_count(), similar as
adjust_managed_page_count() and derive the zone from the page.
It's worth noting that a memory block to be offlined/onlined is either
completely "early" or "not early". add_memory() and friends can only add
complete memory blocks and we only online/offline complete (individual)
memory blocks.
Link: https://lkml.kernel.org/r/20210806124715.17090-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210806124715.17090-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only a single user remaining. We can simply lookup the nid only
used for node offlining purposes when walking our memory blocks. We don't
expect to remove multi-nid ranges; and if we'd ever do, we most probably
don't care about removing multi-nid ranges that actually result in empty
nodes.
If ever required, we can detect the "multi-nid" scenario and simply try
offlining all online nodes.
Link: https://lkml.kernel.org/r/20210712124052.26491-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@ionos.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory"
These are all cleanups and one fix previously sent as part of [1]:
[PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory
groups.
These patches make sense even without the other series, therefore I pulled
them out to make the other series easier to digest.
[1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com
This patch (of 4):
Checkpatch complained on a follow-up patch that we are using "unsigned"
here, which defaults to "unsigned int" and checkpatch is correct.
As we will search for a fitting zone using the wrong pfn, we might end
up onlining memory to one of the special kernel zones, such as ZONE_DMA,
which can end badly as the onlined memory does not satisfy properties of
these zones.
Use "unsigned long" instead, just as we do in other places when handling
PFNs. This can bite us once we have physical addresses in the range of
multiple TB.
Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com
Fixes: e5e6893026 ("mm, memory_hotplug: display allowed zones in the preferred ordering")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When test_pages_in_a_zone() used pfn_valid_within() is has some logic
surrounding pfn_valid_within() checks.
Since pfn_valid_within() is gone, this logic can be removed.
Link: https://lkml.kernel.org/r/20210713080035.7464-3-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE".
After recent updates to freeing unused parts of the memory map, no
architecture can have holes in the memory map within a pageblock. This
makes pfn_valid_within() check and CONFIG_HOLES_IN_ZONE configuration
option redundant.
The first patch removes them both in a mechanical way and the second patch
simplifies memory_hotplug::test_pages_in_a_zone() that had
pfn_valid_within() surrounded by more logic than simple if.
This patch (of 2):
After recent changes in freeing of the unused parts of the memory map and
rework of pfn_valid() in arm and arm64 there are no architectures that can
have holes in the memory map within a pageblock and so nothing can enable
CONFIG_HOLES_IN_ZONE which guards non trivial implementation of
pfn_valid_within().
With that, pfn_valid_within() is always hardwired to 1 and can be
completely removed.
Remove calls to pfn_valid_within() and CONFIG_HOLES_IN_ZONE.
Link: https://lkml.kernel.org/r/20210713080035.7464-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20210713080035.7464-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Under normal circumstances, migrate_pages() returns the number of pages
migrated. In error conditions, it returns an error code. When returning
an error code, there is no way to know how many pages were migrated or not
migrated.
Make migrate_pages() return how many pages are demoted successfully for
all cases, including when encountering errors. Page reclaim behavior will
depend on this in subsequent patches.
Link: https://lkml.kernel.org/r/20210721063926.3024591-3-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-4-ying.huang@intel.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Oscar Salvador <osalvador@suse.de> [optional parameter]
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If offline_pages failed after lru_cache_disable(), it forgot to do
lru_cache_enable() in error path. So we would have lru cache disabled
permanently in this case.
Link: https://lkml.kernel.org/r/20210821094246.10149-3-linmiaohe@huawei.com
Fixes: d479960e44 ("mm: disable LRU pagevec during the migration temporarily")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
make W=1 generates the following warning for __remove_memory
mm/memory_hotplug.c:2044: warning: expecting prototype for remove_memory(). Prototype was for __remove_memory() instead
Commit eca499ab37 ("mm/hotplug: make remove_memory() interface usable")
introduced the kerneldoc comment and function but the kerneldoc name and
function name did not match.
Link: https://lkml.kernel.org/r/20210520084809.8576-9-mgorman@techsingularity.net
Fixes: eca499ab37 ("mm/hotplug: make remove_memory() interface usable")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kefeng Wang