Populate the device-tree node for the PMU device on Tegra194. This also
fixes the following warning that is observed on booting Tegra194.
ERR KERN kvm: pmu event creation failed -2
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable audio capture frontends and a tdm decoder.
This makes it possible to loopback the audio played on the hdmi codec,
which is the only output interface at the moment.
Of course, one TODDR device would be enough to do that but since
the 3 FRDDRs are enabled on the playback side, let's do the same on the
capture side.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210429084253.59692-1-jbrunet@baylibre.com
As the name implies, the USB2 controller should only operate at
USB2 speeds. Make sure it does just that by pinning it to USB
High-Speed (USB2) mode.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210525200246.118323-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add channel nodes for the on die temperatures of PMICS
pmk8350, pm8350, pmr735a and pmr735b.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1621937466-1502-11-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add gpio ranges and correct the compatible to add
"qcom,spmi-gpio" as this pmic is on spmi bus.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1621937466-1502-9-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add gpio ranges and correct the compatible to add
"qcom,spmi-gpio" as this pmic is on spmi bus.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1621937466-1502-7-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add gpio ranges and correct the compatible to add
"qcom,spmi-gpio" as this pmic is on spmi bus.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1621937466-1502-5-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Disable Venus by default to allow booting without closed firmware and
enable it on the boards that didn't previously disable it. This commit
brings no functional difference.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-7-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Disable them by default to allow for booting without a display
and proprietary firmware. Then, enable them on boards that didn't
previously disable them. Hence, this commit brings no functional
difference.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Set the tcsr_mutex_regs size to 0x40000 to allow for accessing
all required registers that will be needed to support modem.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
QUP and UART names start from 1. There are 6 QUPs and 2 UARTs
per BLSP. Let's not further confuse programmers by stating
otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In order to prepare for feature development, the DTs
have to be workable with.. To achieve that:
- Rename msmgpio to tlmm (consistency with newer DTs)
- Rid msm8996-pins.dtsi and add the contents to msm8996.dtsi
- Modernize the pin nodes, make them more concise
- Add generic pin configuration for some hardware
- Fix up some names in preparation for BLSP/UART name cleaning..
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
qcom camera driver allocates the ICP firmware memory
dynamically, so the carveout region is unnecessary.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/20210525133242.188603-1-senozhatsky@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
and WCD9340 codec.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Link: https://lore.kernel.org/r/BN6PR2001MB17966ED1D787FA3F4B90A1A7D95B9@BN6PR2001MB1796.namprd20.prod.outlook.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rmtfs_mem region is a weird one, downstream allocates it
dynamically, and supports a "qcom,guard-memory" property which when set
will reserve 4k above and below the rmtfs memory.
A common from qcom 4.9 kernel msm_sharedmem driver:
/*
* If guard_memory is set, then the shared memory region
* will be guarded by SZ_4K at the start and at the end.
* This is needed to overcome the XPU limitation on few
* MSM HW, so as to make this memory not contiguous with
* other allocations that may possibly happen from other
* clients in the system.
*/
When the kernel tries to touch memory that is too close the
rmtfs region it may cause an XPU violation. Such is the case on the
OnePlus 6 where random crashes would occur usually after boot.
Reserve 4k above and below the rmtfs_mem to avoid hitting these XPU
Violations.
This doesn't entirely solve the random crashes on the OnePlus 6/6T but
it does seem to prevent the ones which happen shortly after modem
bringup.
Fixes: 288ef8a426 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210502014146.85642-4-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers. For the Beacon boards, this reference clock
is controlled by a programmable versaclock. Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.
Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The USB extal clock reference isn't associated to a crystal, it's
associated to a programmable clock, so remove the extal reference,
add the usb2_clksel. Since usb_extal is referenced by the versaclock,
reference it here so the usb2_clksel can get the proper clock speed
of 50MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On Condor, the VCC is connected to
3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux
to match the bus, which is always operating in 1.8V mode.
While at it, deduplicate the pinmux entries, which are now the same for
both default and UHS modes. We still need the two pinctrl entries to
match the bindings though.
Thanks to Marek Vasut for this description from commit 5f65328df3
("arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB").
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210419143858.39401-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The AVB reference clock assumes an external clock that runs
automatically. Because the Versaclock is wired to provide the
AVB refclock, the device tree needs to reference it in order for the
driver to start the clock.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210224115146.9131-5-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The bindings have been updated to support two clocks.
Add a clock-names list in the device tree with fck in it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224115146.9131-3-aford173@gmail.com
[geert: Update new r8a779a0.dtsi]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the "PinePhone" name to the sound card: this will make
upstreaming an ALSA UCM config easier as we can use a unique name.
It also avoids an issue where the default card name is truncated.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: Split out change, updated commit message]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210430035859.3487-8-samuel@sholland.org
During hardware validation it was noticed that the clock isn't
continuously enabled when there is no link. This is because the 125MHz
clock is derived from the internal PLL which seems to go into some kind
of power-down mode every once in a while. The LS1028A expects a contiuous
clock. Thus enable the PLL all the time.
Also, the RGMII pad voltage is wrong, it was configured to 2.5V (that is
the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO
regulator.
This fix is for the freescale/fsl-ls1028a-kontron-sl28-var1.dts.
Fixes: 642856097c ("arm64: dts: freescale: sl28: add variant 1")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
During hardware validation it was noticed that the clock isn't
continuously enabled when there is no link. This is because the 125MHz
clock is derived from the internal PLL which seems to go into some kind
of power-down mode every once in a while. The LS1028A expects a contiuous
clock. Thus enable the PLL all the time.
Also, the RGMII pad voltage is wrong. It was configured to 2.5V (that is
the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO
regulator.
This fix is for the freescale/fsl-ls1028a-kontron-sl28-var4.dts.
Fixes: 815364d042 ("arm64: dts: freescale: add Kontron sl28 support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As this is a fixed regulator on the board there was no harm in the wrong
voltage being specified, apart from a confusing reporting to userspace.
Fixes: 4a13b3bec3 ("arm64: dts: imx: add Zii Ultra board support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When adding the sound support a second instance of the GEN_3V3 regulator was
added by accident. Remove it and point the consumers to the first instance.
Fixes: 663a5b5efa ("arm64: dts: zii-ultra: add sound support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
While enabling EDAC support for the LS1028A it was discovered that the
memory node has a wrong endianness setting as well as a wrong interrupt
assignment. Fix both.
This was tested on a sl28 board. To force ECC errors, you can use the
error injection supported by the controller in hardware (with
CONFIG_EDAC_DEBUG enabled):
# enable error injection
$ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl
# flip lowest bit of the data
$ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo
Fixes: 8897f3255c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are no sub-mailbox devices defined currently for both the
IOT2050 boards. These are usually dictated by the firmwares running
on the R5F remote processors and the applications they provide.
Defining the actual sub-mailboxes will also dictate the interrupts
the clusters will use for interrupts on the Cortex-A53 cores.
Disable all of the Mailbox clusters until the sub-mailboxes are
defined and used. This fixes the warnings around the missing
interrupts with the upcoming conversion of the OMAP Mailbox binding
to YAML format.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210514212016.3153-1-s-anna@ti.com
Only a small number of fixes so far, including some that I had applied
during the merge window, so this is based on the original merge of the
other branches.
- The largest change is a fix for a reference counting bug in
the AMD TEE driver.
- Neil Armstrong now co-maintains Amlogic SoC support
- Two build warning fixes for renesas device tree files
- A sign expansion bug for optee
- A DT binding fix for a mismerge
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=w6Zu
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Only a small number of fixes so far, including some that I had applied
during the merge window, so this is based on the original merge of the
other branches.
- The largest change is a fix for a reference counting bug in the AMD
TEE driver.
- Neil Armstrong now co-maintains Amlogic SoC support
- Two build warning fixes for renesas device tree files
- A sign expansion bug for optee
- A DT binding fix for a mismerge"
* tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: npcm: wpcm450: select interrupt controller driver
MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer
tee: amdtee: unload TA only when its refcount becomes 0
dt-bindings: nvmem: mediatek: remove duplicate mt8192 line
firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle
firmware: arm_scpi: Prevent the ternary sign expansion bug
arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Fix CSI40 ports
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The NanoPi R1S H5 is a open source board made by FriendlyElec.
It has the following features:
- Allwinner H5, Quad-core Cortex-A53
- 512MB DDR3 RAM
- 10/100/1000M Ethernet x 2
- RTL8189ETV WiFi 802.11b/g/n
- USB 2.0 host port (A)
- MicroSD Slot
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn
The RK3308 SoC has a gmac with only the RMII interface exposed. This
commit adds it to the RK3308 dtsi.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Interrupt routers are memory mapped peripherals, that are organized
in our dts bus hierarchy to closely represents the actual hardware
behavior.
However, without explicitly calling out the reg property, using
2021.03+ dt-schema package, this exposes the following problem with
dtbs_check:
/arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@100000:
interrupt-controller0: {'type': 'object'} is not allowed for
{'compatible': ['ti,sci-intr'], .....
Even though we don't use interrupt router directly via memory mapped
registers and have to use it via the system controller, the hardware
block is memory mapped, so describe the base address in device tree.
This is a valid, comprehensive description of hardware and permitted
by the existing ti,sci-intr schema.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210511194821.13919-1-nm@ti.com
Instead of using empty ranges property, lets map explicitly the address
range that is mapped onto the dma / navigator subsystems (navss/dmss).
This is also exposed via the dtbs_check with dt-schema newer than
2021.03 version by throwing out following:
arch/arm64/boot/dts/ti/k3-am654-base-board.dt.yaml: bus@100000: main-navss:
{'type': 'object'} is not allowed for
{'compatible': ['simple-mfd'], '#address-cells': [[2]], .....
This has already been correctly done for J7200, however was missed for
other k3 SoCs. Fix that oversight.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20210510145429.8752-1-nm@ti.com
Lets rename the node name of TI-SCI node to be system-controller as it
is a better standardized name for the function that TI-SCI plays in the
SoC.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-5-nm@ti.com
The DMSC node does'nt require any of "#address-cells", "#size-cells"
or "ranges" property as the child nodes are representations of SoC's
system controller itself, so align it with the bindings.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-4-nm@ti.com
We currently use clocks as the node name for the node representing
TI-SCI clock nodes. This is better renamed to being clock-controller
as that is a better representative of the system controller function
as a clock controller for the SoC.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210510145033.7426-2-nm@ti.com
Traffic through main NAVSS interconnect is coherent wrt ARM caches on
J7200 SoC. Add missing dma-coherent property to main_navss node.
Also add dma-ranges to be consistent with mcu_navss node
and with AM65/J721e main_navss and mcu_navss nodes.
Fixes: d361ed8845 ("arm64: dts: ti: Add support for J7200 SoC")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210510180601.19458-1-vigneshr@ti.com
AM654 EVM boards are not shipped with OV5640 sensor module, it is a
separate purchase. OV5640 module is also just one of the possible
sensors or capture boards you can connect.
However, for some reason, OV5640 has been added to the board dts file,
making it cumbersome to use other sensors.
Remove the OV5640 from the dts file so that it is easy to use other
sensors via DT overlays.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210423083120.73476-1-tomi.valkeinen@ideasonboard.com
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: syscon@ff100000:
grf-gpio: {'compatible': ['rockchip,rk3328-grf-gpio'],
'gpio-controller': True, '#gpio-cells': [[2]], 'phandle': [[68]]} is not
of type 'array'
Due to the regex "(?<!,nr)-gpios?$" anything that ends on
'-gpio', '-gpios' gives a match.
Rename 'grf-gpio' nodename to generic 'gpio'
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/gpio/gpio-consumer.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210512122346.9463-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is enough to make the SATA controller visible:
# lspci
00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd RK3399 PCI Express Root Port
01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210510090932.970447-1-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On the helios64 board the two connectors P6 and P7 are supposed to
power two fans. Add the corresponding pwm-fan devices.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210510090607.970145-1-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
sdmmcio-regulator: states:0:
[1800000, 1, 3300000, 0] is too long
dtbs_check expects regulator-gpio states in a format
of 2 per item, so fix them all.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
regulator/gpio-regulator.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210510215840.16270-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fennel is known as Lenovo IdeaPad Flex 3 Chromebook.
Fennel14 is known as Lenovo IdeaPad 3 Chromebook.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210421090601.730744-11-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Kenzo is known as Acer Chromebook 311.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210421090601.730744-10-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Burnet is known as HP Chromebook x360 11MK G3 EE
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210421090601.730744-9-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Willow is known as Acer Chromebook 311 (C722/C722T)
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210421090601.730744-8-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Kappa is known as HP Chromebook 11a
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210421090601.730744-7-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add larb nodes for MT8167:
* larb0 is used for display (dsi and hdmi)
* larb1 is used for camera (csi)
* larb2 is used for the video hardware decoder
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210406113631.2675029-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
There are two separate hardware encoder blocks inside MT8173.
Split the current mtk-vcodec-enc node to match the hardware architecture.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Link: https://lore.kernel.org/r/20210325122625.15100-2-irui.wang@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The PinePhone has a Bluetooth chip with its PCM interface connected to
AIF3. Add the DAI link so headeset audio can be routed in hardware.
Even though the link is 16 bit PCM, configuring the link a 32-bit slot
is required for compatibility with AIF2, which also uses a 32-bit slot,
and which shares clock dividers with AIF3. Using equal clock frequencies
allows the modem and headset to be used at the same time.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210430035859.3487-7-samuel@sholland.org
simple-audio-card supports either a single DAI link at the top level, or
subnodes with one or more DAI links. To use the secondary AIFs on the
codec, we need to add additional DAI links to the same sound card, so we
need to use the other binding.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210430035859.3487-6-samuel@sholland.org
Now that the sun8i-codec driver supports AIF2 and AIF3, boards can use
them in DAI links. Add the necessary pinmux nodes.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210430035859.3487-5-samuel@sholland.org
Increase #sound-dai-cells on the digital codec to allow using the other
DAIs provided by the codec for AIF2 and AIF3.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210430035859.3487-4-samuel@sholland.org
For a CPU to enter an idle state, some timer must be available to
trigger an IRQ and wake it back up. The local ARM architectural timer is
not sufficient, because that timer stops when the CPU is powered down.
The ARM architectural timer from some other CPU can be used, but doing
so prevents that other CPU from entering an idle state. For all CPUs to
power down at the same time, Linux needs a timer which is not tied to
any CPU.
Hook up the "sun4i" timer so it can be used for this purpose. It runs at
24 MHz, which balances resolution and power consumption.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210322044707.19479-5-samuel@sholland.org
Nodes should be sorted by unit address. Move the watchdog node to the
correct place, so it will be next to the timer node when that is added.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210322044707.19479-4-samuel@sholland.org
The Gateworks GW7901 is an ARM based single board computer (SBC)
featuring:
- i.MX8M Mini SoC
- LPDDR4 DRAM
- eMMC FLASH
- SPI FRAM
- Gateworks System Controller (GSC)
- Atmel ATECC Crypto Authentication
- USB 2.0
- Microchip GbE Switch
- Multiple multi-protocol RS232/RS485/RS422 Serial ports
- onboard 802.11ac WiFi / BT
- microSD socket
- miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets
- Wide range DC power input
- 802.3at PoE
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
optee node was disabled by default, enabling it for ls1028a-rdb.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx8mp-evk uses an PCA9450C as PMIC that supplies various
regulators.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #power-domain-cells to power domain nodes, because they
are required by power-domain.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-9-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-8-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below aimed at powerpc generates
notifications in the Rockchip arm64 tree.
Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3399.dtsi
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210413141709.845592-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Turns out the fephy pins are already claimed in the phy node, which is
rightfully where they should be claimed.
Drop the pinctrl properties from the gmac2phy node for the ROCK Pi E.
Fixes: b918e81f21 ("arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210426095916.14574-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
However "sys" is not a valid function, and it is always on.
Let's keep existing functions.
Fixes: db792e9adb ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S")
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20210426114652.29542-1-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NanoPi R2S has a Realtek RTL8153B USB 3.0 Ethernet chip connected
to the USB 3.0 pins of the RK3328 SoC. Power to the chip is controlled
by a GPIO line toggled transistor switch, which is not a full-blown
voltage regulator.
At least in Linux, the USB 3.0 XHCI controller has two ports: the first
port is for legacy USB 2.0 and slower, while the second port is for USB
3.0. Since the Ethernet chip supports USB 3.0, it should be described
as connected to the second port.
Add the device nodes for the power switch and Ethernet chip, and enable
the USB 3.0 controller. The USB device node follows the standard USB
device binding.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210504083616.9654-5-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable USB3 nodes for the Rock Pi E board.
The VBUS regulator device node was added when the board was first
introduced.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210504083616.9654-4-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable USB3 nodes for the ROC-RK3328-CC board.
The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210504083616.9654-3-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable USB3 nodes for the rk3328-based PINE Rock64 board.
The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.
[wens@csie.org: Rebased onto v5.12]
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
[wens@csie.org: Rewrote commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210504083616.9654-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This set of changes adds support for the PWM controller found on Toshiba
Visconti SoCs and converts a couple of drivers to the atomic API.
There's also a bunch of cleanups and minor fixes across the board.
-----BEGIN PGP SIGNATURE-----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=d0HN
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This adds support for the PWM controller found on Toshiba Visconti
SoCs and converts a couple of drivers to the atomic API.
There's also a bunch of cleanups and minor fixes across the board"
* tag 'pwm/for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (35 commits)
pwm: Reword docs about pwm_apply_state()
pwm: atmel: Improve duty cycle calculation in .apply()
pwm: atmel: Fix duty cycle calculation in .get_state()
pwm: visconti: Add Toshiba Visconti SoC PWM support
dt-bindings: pwm: Add bindings for Toshiba Visconti PWM Controller
arm64: dts: rockchip: Remove clock-names from PWM nodes
ARM: dts: rockchip: Remove clock-names from PWM nodes
dt-bindings: pwm: rockchip: Add more compatible strings
dt-bindings: pwm: Convert pwm-rockchip.txt to YAML
pwm: mediatek: Remove unused function
pwm: pca9685: Improve runtime PM behavior
pwm: pca9685: Support hardware readout
pwm: pca9685: Switch to atomic API
pwm: lpss: Don't modify HW state in .remove callback
pwm: sti: Free resources only after pwmchip_remove()
pwm: sti: Don't modify HW state in .remove callback
pwm: lpc3200: Don't modify HW state in .remove callback
pwm: lpc18xx-sct: Free resources only after pwmchip_remove()
pwm: bcm-kona: Don't modify HW state in .remove callback
pwm: bcm2835: Free resources only after pwmchip_remove()
...
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S
Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q
5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA
Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd
q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR
I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9
wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr
7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO
zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU
rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5
pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2
B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY=
=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
The port@0 is a mandatory port, add or move the declaration to the CSI-2
nodes top declared in dtsi files instead of depending on dts files
adding them when describing the external connection.
This fixes validation warnings for DTB outputs that do not connect all
CSI-2 receivers to transmitters and thus declaring all port@0 nodes in
dts files.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210421150221.3202955-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix the DTS schema by explicitly stating that the input is port@0. This
fixes a schema validation error but has no runtime effect as the default
port number is 0 if not specified.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210421150221.3202955-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rockchip DWMAC glue driver uses the phy node (phy-handle)
reset specifier, and not a "mac-phy" reset specifier.
Remove it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the merge commit
and on the AsahiLinux wiki.
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pBZy
-----END PGP SIGNATURE-----
Merge tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Apple M1 platform support from Arnd Bergmann:
"The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the commit message of
commit 1bb2fd3880 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
AsahiLinux wiki"
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
asm-generic/io.h: Unbork ioremap_np() declaration
arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
dt-bindings: display: Add apple,simple-framebuffer
arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
irqchip/apple-aic: Add support for the Apple Interrupt Controller
dt-bindings: interrupt-controller: Add DT bindings for apple-aic
arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
of/address: Add infrastructure to declare MMIO as non-posted
asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
arm64: Implement ioremap_np() to map MMIO as nGnRnE
docs: driver-api: device-io: Document ioremap() variants & access funcs
docs: driver-api: device-io: Document I/O access functions
asm-generic/io.h: Add a non-posted variant of ioremap()
arm64: arch_timer: Implement support for interrupt-names
dt-bindings: timer: arm,arch_timer: Add interrupt-names support
arm64: cputype: Add CPU implementor & types for the Apple M1 cores
dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
dt-bindings: arm: apple: Add bindings for Apple ARM platforms
dt-bindings: vendor-prefixes: Add apple prefix
There are six new SoCs added this time. Apple M1 and Nuvoton WPCM450
have separate branches because they are new SoC families that require
changes outside of device tree files. The other four are variations of
already supported chips and get merged through this branch:
- STMicroelectronics STM32H750 is one of many variants of STM32
microcontrollers based on the Cortex-M7 core. This is particularly
notable since we rarely add support for new MMU-less chips
these days. In this case, the board that gets added along with
the platform is not a SoC reference platform but the "Art Pi"
(https://art-pi.gitee.io/website/) machine that was originally design
for the RT-Thread RTOS.
- NXP i.MX8QuadMax is a variant of the growing i.MX8 embedded/industrial
SoC family, using two Cortex-A72 and four Cortex-A53 cores. It
gets added along with its reference board, the "NXP i.MX8QuadMax
Multisensory Enablement Kit".
- Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon 7c)
that is used in some Chromebooks and Windows laptops. Only a reference
board is added for the moment.
- TI AM64x Sita4ra is a new version of the K3 SoC family for industrial
control, motor control, remote IO, IoT gateway etc., similar to the
older AM65x family. Two reference machines are added alongside.
Among the newly added machines, there is a very clear skew towards 64-bit
machines now, with 12 32-bit machines compared to 23 64-bit machines. The
full list sorted by SoC is:
- ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
- Allwinner A10: Topwise A721 Tablet
- Amlogic GXL: MeCool KII TV box
- Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
- Broadcom BCM4908: TP-Link Archer C2300 V1 router
- MStar SSD202D: M5Stack UnitV2 camera
- Marvell Armada 38x: ATL-x530 ethernet switch
- Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311,
Asus Flip CM3, Asus Detachable CM3
- Mediatek MT8516/MT8183: OLogic Pumpkin Board
- NXP i.MX7: reMarkable Tablet
- NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
- Nuvoton NPCM730: Quanta GBS BMC
- Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
- Qualcomm MSM8998: OnePlus 5/5T phones
- Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
- Rockchip RK3399: NanoPi R4S board
- STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM,
EDIMM2.2 Starter Kit, Carrier, SOM
- TI AM65: Siemens SIMATIC IOT2050 gateway
There is notable work going into extending already supported machines
and SoCs:
- ASpeed AST2500
- Allwinner A23, A83t, A31, A64, H6
- Amlogic G12B
- Broadcom BCM4908
- Marvell Armada 7K/8K/CN91xx
- Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
- NXP i.MX8Q, i.MX8MM, i.MX8MP
- Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
- Renesas R-Car M3, V3U
- Rockchip RK3328, RK3399
- STEricsson U8500
- STMicroelectronics STM32MP141
- Samsung Exynos 4412
- TI K3-AM65, K3-J7200
- TI OMAP3
Among the treewide cleanups and bug fixes, two parts stand out:
- There are a number of cleanups for issues pointed out by 'make
dtbs_check' this time, and I expect more to come in the future as we
increasingly check for regressions.
- After a change to the MMC subsystem that can lead to unpredictable
device numbers, several platforms add 'aliases' properties for these
to give each MMC controller a fixed number.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=SpTo
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"There are six new SoCs added this time.
Apple M1 and Nuvoton WPCM450 have separate branches because they are
new SoC families that require changes outside of device tree files.
The other four are variations of already supported chips and get
merged through this branch:
- STMicroelectronics STM32H750 is one of many variants of STM32
microcontrollers based on the Cortex-M7 core.
This is particularly notable since we rarely add support for new
MMU-less chips these days. In this case, the board that gets added
along with the platform is not a SoC reference platform but the
"Art Pi" (https://art-pi.gitee.io/website/) machine that was
originally design for the RT-Thread RTOS.
- NXP i.MX8QuadMax is a variant of the growing i.MX8
embedded/industrial SoC family, using two Cortex-A72 and four
Cortex-A53 cores.
It gets added along with its reference board, the "NXP i.MX8QuadMax
Multisensory Enablement Kit".
- Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon
7c) that is used in some Chromebooks and Windows laptops.
Only a reference board is added for the moment.
- TI AM64x Sita4ra is a new version of the K3 SoC family for
industrial control, motor control, remote IO, IoT gateway etc.,
similar to the older AM65x family.
Two reference machines are added alongside.
Among the newly added machines, there is a very clear skew towards
64-bit machines now, with 12 32-bit machines compared to 23 64-bit
machines. The full list sorted by SoC is:
- ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
- Allwinner A10: Topwise A721 Tablet
- Amlogic GXL: MeCool KII TV box
- Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
- Broadcom BCM4908: TP-Link Archer C2300 V1 router
- MStar SSD202D: M5Stack UnitV2 camera
- Marvell Armada 38x: ATL-x530 ethernet switch
- Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip
CM3, Asus Detachable CM3
- Mediatek MT8516/MT8183: OLogic Pumpkin Board
- NXP i.MX7: reMarkable Tablet
- NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
- Nuvoton NPCM730: Quanta GBS BMC
- Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
- Qualcomm MSM8998: OnePlus 5/5T phones
- Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
- Rockchip RK3399: NanoPi R4S board
- STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2
Starter Kit, Carrier, SOM
- TI AM65: Siemens SIMATIC IOT2050 gateway
There is notable work going into extending already supported machines
and SoCs:
- ASpeed AST2500
- Allwinner A23, A83t, A31, A64, H6
- Amlogic G12B
- Broadcom BCM4908
- Marvell Armada 7K/8K/CN91xx
- Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
- NXP i.MX8Q, i.MX8MM, i.MX8MP
- Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
- Renesas R-Car M3, V3U
- Rockchip RK3328, RK3399
- STEricsson U8500
- STMicroelectronics STM32MP141
- Samsung Exynos 4412
- TI K3-AM65, K3-J7200
- TI OMAP3
Among the treewide cleanups and bug fixes, two parts stand out:
- There are a number of cleanups for issues pointed out by 'make
dtbs_check' this time, and I expect more to come in the future as
we increasingly check for regressions.
- After a change to the MMC subsystem that can lead to unpredictable
device numbers, several platforms add 'aliases' properties for
these to give each MMC controller a fixed number"
* tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits)
dt-bindings: mali-bifrost: add dma-coherent
arm64: dts: amlogic: misc DT schema fixups
arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
ARM: dts: mstar: Add a dts for M5Stack UnitV2
dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2
dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack
arm64: dts: mt8183: fix dtbs_check warning
arm64: dts: mt8183-pumpkin: fix dtbs_check warning
ARM: dts: aspeed: tiogapass: add hotplug controller
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
ARM: dts: qcom: sdx55: add IPA information
ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
...
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
Here is the big set of USB and Thunderbolt driver updates for 5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work
with (something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa42A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymMEACgkQBzLb5W/IocS+oq7+D7P3V581sAn1Dcy2Qq
Yz370/X2hrjXAyIm7/Cz
=5dj/
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work with
(something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits)
usb: Fix up movement of USB core kerneldoc location
usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability
usb: dwc3: Capture new capability register GHWPARAMS9
usb: gadget: prevent a ternary sign expansion bug
usb: dwc3: core: Do core softreset when switch mode
usb: dwc2: Get rid of useless error checks in suspend interrupt
usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
usb: dwc2: Add exit hibernation mode before removing drive
usb: dwc2: Add hibernation exiting flow by system resume
usb: dwc2: Add hibernation entering flow by system suspend
usb: dwc2: Allow exit hibernation in urb enqueue
usb: dwc2: Move exit hibernation to dwc2_port_resume() function
usb: dwc2: Move enter hibernation to dwc2_port_suspend() function
usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.
usb: dwc2: Clear fifo_map when resetting core.
usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
usb: dwc2: Fix hibernation between host and device modes.
usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
usb: dwc2: Reset DEVADDR after exiting gadget hibernation.
usb: dwc2: Update exit hibernation when port reset is asserted
...
These should be the final fixes for v5.12. There is one fix for SD card
detection on one Allwinner board, and a few fixes for the Tegra
platform that I had already queued up for v5.13 due to a communication
problem. This addresses MMC device ordering on multiple machines,
audio support on Jetson AGX Xavier and suspend/resume on Jetson TX2.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=kooC
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These should be the final fixes for v5.12.
There is one fix for SD card detection on one Allwinner board, and a
few fixes for the Tegra platform that I had already queued up for
v5.13 due to a communication problem. This addresses MMC device
ordering on multiple machines, audio support on Jetson AGX Xavier and
suspend/resume on Jetson TX2"
* tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
arm64: tegra: Move clocks from RT5658 endpoint to device node
arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
arm64: tegra: Set fw_devlink=on for Jetson TX2
arm64: tegra: Add unit-address for ACONNECT on Tegra186
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dt.yaml:
pwm@ff680030: clock-names: ['pwm'] is too short
Devices with only one PWM clock use it to both to derive the functional
clock for the device and as the bus clock. The driver does not need
"clock-names" to get a handle, so remove them all.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
arm64: tegra: Device tree fixes for v5.12-rc6
This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.
* tegra/dt64:
arm64: tegra: Move clocks from RT5658 endpoint to device node
arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
arm64: tegra: Set fw_devlink=on for Jetson TX2
arm64: tegra: Add unit-address for ACONNECT on Tegra186
Link: https://lore.kernel.org/linux-arm-kernel/YILD4yyPXuiYbHW1@orome.fritz.box/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UniPhier LD20 and PXs3 boards have RTL8211E ethernet phy, and the phy have
the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY
pins.
After the commit bbc4d71d63 ("net: phy: realtek: fix rtl8211e rx/tx
delay config"), the delays are working correctly, however, "rgmii" means
no delay and the phy doesn't work. So need to set the phy-mode to
"rgmii-id" to show that RX/TX delays are enabled.
Fixes: c73730ee4c ("arm64: dts: uniphier: add AVE ethernet node")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take a pass at cleaning up a bunch of warnings
from 'make dtbs_check' that have crept in.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210421204833.18523-1-khilman@baylibre.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYIEprQAKCRDj7w1vZxhR
xSnLAQDInWpOUh1W1ovIe0lHOWYDvByozCh4zQcssKHJhwp25QD/RPTVbwIJI0KV
pOaf8QuqaP74K7KVpbEPBhJG0d6GtwM=
=AaDi
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One fix for the MMC card detect on the Pine H64 board
* tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
Link: https://lore.kernel.org/r/45fc5e4d-ef48-4729-a869-79a8f288bb83.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 941432d007 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.
This was based on the observation that the Pine64-LTS has as "push-push"
SD card socket, and that the schematic mentions the card detect GPIO.
After having received two reports about failing SD card access with that
patch, some more research and polls on that subject revealed that there
are at least two different versions of the Pine64-LTS out there:
- On some boards (including mine) the card detect pin is "stuck" at
high, regardless of an microSD card being inserted or not.
- On other boards the card-detect is working, but is active-high, by
virtue of an explicit inverter circuit, as shown in the schematic.
To cover all versions of the board out there, and don't take any chances,
let's revert the introduction of the active-low CD GPIO, but let's use
the broken-cd property for the Pine64-LTS this time. That should avoid
regressions and should work for everyone, even allowing SD card changes
now.
The SOPine card detect has proven to be working, so let's keep that
GPIO in place.
Fixes: 941432d007 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Reported-by: Daniel Kulesz <kuleszdl@posteo.org>
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210414104740.31497-1-andre.przywara@arm.com
Add a node describing the address in the SoC memory space for the IERB.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This contains three audio related fixes for the sc7180 Trogdor devices.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmB9npMbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3Fn0QQAJXtkbYx09JwzQ8gOfl0
jPt8iyJuqW+HxpyCKmsHzpwj+kpCSi54XJIfyfFSfvSnIZM4viJ4nTpMsYw9OpYi
QPsx5nnUahIvJcwPz5RJ+E7EFfhD0wDXy4QtQF0a3bDgZ+2Y+1EPWcV/lP6qoXkW
ds/dsz/JsuqAAjjydPjSeFfqI6yxWelwCz52Zj0uSqjVJR90EjSj6JmIF9FTMHHM
RuXK6MinvKLeDn2sxNYy+uVu7XuEKMU5y/YzDkPgq+h8NVwYWMAmMRhjhICfWH5G
rBHSiFLNxqz8X5/Hb+R4AS4sBfhTZ92YcJT9HAYCrlI3yRwNw4CtUaQQud25SC0g
mdQsMqffDGCedJcHijCURVTUHXVjgahOO1p321zS7R2JJpYz8jP3ZSC81pCwTPK1
9dtMGEQNXdThUuVoh8iDjCSK0y6zCb21eEU50g/rkkWyIab6xZTa2ZZATRCzTW2z
8+2bnfaLCHKor5b6iXd6cDFQU/ihx1oxoRSb6av34+r7uo7Yh+FJsNUjl9w2FLSJ
aRmOBDWoi5uf5/+XpfXD/OKJYCtS8aZ9sxJpfAjLviv9R2FcOMmu1pCJ1os7g1zR
HmROEwMf0pgtOMshQLutxgid4cvI1neml/lR8FrgqSBhL11oSWDQtzV9Jvyi+aVk
psSIbQyNcQQL6n2CbRwPt3wb
=LhLX
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Even more Qualcomm ARM64 updates for v5.13
This contains three audio related fixes for the sc7180 Trogdor devices.
* tag 'qcom-arm64-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
Link: https://lore.kernel.org/r/20210419151637.861409-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This was present downstream. Add upstream too. NOTE: upstream I
managed to get some sort of halfway state and got one pinctrl entry in
the coachz-r1 device tree. Remove that as part of this since it's now
in the dtsi.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210315133924.v2.1.I601a051cad7cfd0923e55b69ef7e5748910a6096@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the, recently introduced, interconnect handling in the
GENI (serial engine) driver when running off ACPI, as this causes the
GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard
and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine,
some MAINTAINERS maintainance, and a clk / reset switch to our headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=f2ly
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with
the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
aliases should be board specific, all the mmc device instances are
all there in the SoC, and we do probe them by default so that PM
runtime can idle the devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the recently introduced interconnect handling in
the GENI (serial engine) driver when running off ACPI, as this
causes the GENI probe to fail and the Lenovo Yoga C630 to boot
without keyboard and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
our headers"
* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
soc: qcom: geni: shield geni_icc_get() for ACPI boot
and using ranged values to allow better compatibility with regulator
steps), gpu opps on px30, infrared receiver on rockpro64,
USB3 support on rk3328, MMC alias fixups, dt-compatible fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmByvnMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdga73B/9EvLxu08VwgERaPs1n6XrjpDwfid7u9ops
wi5/bLqeBK4Jrg7jrlN1snwzfqnqPeDe2amZyi1CwCnPJNmloIkMIdLtSwIdc2ws
85O8Oa3Yus3boRh+bQ67F8vP6QNNfu0u9q5Nqe3cQhp/R8PaCZy1gVVjX4ZJiFz8
qmcPsI92czrlK0zcjWU7LfIzYVUZ/XPKTcBDkpQb1wPJ2/j6mHz4a4XXrfltLtKJ
P1XpseI4YqIFt77cZV0bpeO49/wq5UX6KSdYDdpYzO9e8FUPT6Khhc4CpApsIxyY
QgHPe6pgJj/KZHI8/Qo9I0nLjxNTJXmad0FNIBvinuyATv2zSt4M
=Zu51
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New board the NanoPi R4S, OPP adjustments on rk3399 (sync with vendor
and using ranged values to allow better compatibility with regulator
steps), gpu opps on px30, infrared receiver on rockpro64,
USB3 support on rk3328, MMC alias fixups, dt-compatible fixes.
* tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: move mmc aliases to board dts on rk3399
arm64: dts: rockchip: move mmc aliases to board dts on rk3368
arm64: dts: rockchip: move mmc aliases to board dts on rk3328
arm64: dts: rockchip: move mmc aliases to board dts on rk3308
arm64: dts: rockchip: move mmc aliases to board dts on px30
arm64: dts: rockchip: add new watchdog compatible to rk3399.dtsi
arm64: dts: rockchip: add new watchdog compatible to rk3328.dtsi
arm64: dts: rockchip: add new watchdog compatible to rk3308.dtsi
arm64: dts: rockchip: add new watchdog compatible to px30.dtsi
arm64: dts: rockchip: enable dwc3 usb for A95X Z2
arm64: dts: rockchip: add rk3328 dwc3 usb controller node
rockchip: rk3399: Add support for FriendlyARM NanoPi R4S
dt-bindings: Add doc for FriendlyARM NanoPi R4S
arm64: dts: rockchip: add phandle to timer0 on rk3368
arm64: dts: rockchip: add infrared receiver node to rockpro64
arm64: dts: rockchip: drop separate opp table on rk3399-puma
arm64: dts: rockchip: used range'd gpu opps on rk3399
arm64: dts: rockchip: synchronize rk3399 opps with vendor kernel
arm64: dts: rockchip: Add gpu opp nodes to px30 dtsi
Link: https://lore.kernel.org/r/2191862.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-6-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-5-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-4-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
For the Engicam-boards this means a split as the core
boards contains the emmc while the commit baseboard handles
sdmmc and sdio.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-3-heiko@sntech.de
Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).
Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.
SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.
It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.
Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.
-----BEGIN PGP SIGNATURE-----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=7juS
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 5.13
This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.
SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.
It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.
Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.
* tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (25 commits)
arm64: dts: qcom: update usb qmp phy clock-cells property
arm64: dts: qcom: msm8916: Add GICv2 hypervisor registers/interrupt
arm64: dts: sdm845-db845c: make firmware filenames follow linux-firmware
arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits
arm64: dts: qcom: sc7280: Add Coresight support
arm64: dts: qcom: sc7280: Add AOSS QMP node
arm64: dts: qcom: sc7280: Add IPCC for SC7280 SoC
arm64: dts: qcom: sc7280: Add device tree node for LLCC
arm64: dts: qcom: Add support for OnePlus 5/5T
arm64: dts: qcom: msm8998: Disable MSS remoteproc by default
arm64: dts: qcom: Move rmtfs memory region
arm64: dts: qcom: Add sound node for sc7180-trogdor-coachz
arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver
arm64: dts: qcom: use dp_phy to provide clocks to dispcc
arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode
arm64: dts: qcom: sm8250: Add venus DT node
arm64: dts: qcom: sm8250: Add videocc DT node
arm64: dts: qcom: sm8350: Add interconnects
arm64: dts: qcom: sm8350: Add support for PRNG EE
arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp
...
Link: https://lore.kernel.org/r/20210409163949.776530-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MAINTAINERS maintainance, and a clk / reset switch to our headers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYG2bAQAKCRDj7w1vZxhR
xW/cAQDpP3oAyk00M6ZMKIMefm/DQI3qbf9cA0P9JsPa1inNbAEA0WlHJt2zdGRT
ISRW7PI1TyHxMcVteyiw7gE5BvU7kAQ=
=Jgu5
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine, some
MAINTAINERS maintainance, and a clk / reset switch to our headers.
* tag 'sunxi-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
Link: https://lore.kernel.org/r/9972a85e-60b7-49f4-a246-db3396dd4764.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The top-level node doesn't provide any clocks, the subnode provides a
single clock with of_clk_hw_simple_get.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143705.14277-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The ARM Cortex-A53 CPU cores and QGIC2 interrupt controller
(an implementation of the ARM GIC 2.0 specification) used in MSM8916
support virtualization, e.g. for KVM on Linux. However, so far it was
not possible to make use of this functionality, because Qualcomm's
proprietary "hyp" firmware blocks the EL2 mode of the CPU and only
allows booting Linux in EL1.
However, on devices without (firmware) secure boot there is no need
to rely on all of Qualcomm's firmware. The "hyp" firmware on MSM8916
seems simple enough that it can be replaced with an open-source
alternative created only based on trial and error - with some similar
EL2/EL1 initialization code adapted from Linux and U-Boot.
qhypstub [1] is such an open-source firmware for MSM8916 that
can be used as drop-in replacement for Qualcomm's "hyp" firmware.
It does not implement any hypervisor functionality.
Instead, it allows booting Linux/KVM (or other hypervisors) in EL2.
With Linux booting in EL2, KVM seems to be working just fine on MSM8916.
However, so far it is not possible to make use of the virtualization
features in the GICv2. To use KVM's VGICv2 code, the QGIC2 device tree
node needs additional resources (according to binding documentation):
- The CPU interface region (second reg) must be at least 8 KiB large
to access the GICC_DIR register (mapped at 0x1000 offset)
- Virtual control/CPU interface register base and size
- Hypervisor maintenance interrupt
Fortunately, the public APQ8016E TRM [2] provides the required information:
- The CPU interface region (at 0x0B002000) actually has a size of 8 KiB
- Virtual control/CPU interface register is at 0x0B001000/0x0B004000
- Hypervisor maintenance interrupt is "PPI #0"
Note: This is a bit strange since almost all other ARM SoCs use
GIC_PPI 9 for this. However, I have verified that this is
indeed the interrupt that fires when bits are set in GICH_HCR.
Add the additional resources to the QGIC2 device tree node in msm8916.dtsi.
There is no functional difference when Linux is started in EL1 since the
additional resources are ignored in that case.
With these changes (and qhypstub), KVM seems to be fully working on
the DragonBoard 410c (apq8016-sbc) and BQ Aquaris X5 (longcheer-l8910).
[1]: https://github.com/msm8916-mainline/qhypstub
[2]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210407163648.4708-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This currently supports:
* SMP (via spin-tables)
* AIC IRQs
* Serial (with earlycon)
* Framebuffer
A number of properties are dynamic, and based on system firmware
decisions that vary from version to version. These are expected
to be filled in by the loader.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
Add the meson saradc node to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common
dtsi file.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-2-christianshewitt@gmail.com
This extends the initial SM8350 description merged in v5.12 with
CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds
initial PMIC definitions for the 6 PMICs found on the MTP and it
introduces the new SM8350 Hardware Development Kit (HDK).
SC7180 is further polished, the DisplayPort portion of the QMP phy is
defined and several new SKUs of the Trogdor devices are introduced.
The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI,
CPU idle, SMMU and watchdog defined.
SDM845 gains the camera related nodes and some cleanups.
For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for
chip select.
-----BEGIN PGP SIGNATURE-----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=a6Po
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for 5.13
This extends the initial SM8350 description merged in v5.12 with
CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds
initial PMIC definitions for the 6 PMICs found on the MTP and it
introduces the new SM8350 Hardware Development Kit (HDK).
SC7180 is further polished, the DisplayPort portion of the QMP phy is
defined and several new SKUs of the Trogdor devices are introduced.
The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI,
CPU idle, SMMU and watchdog defined.
SDM845 gains the camera related nodes and some cleanups.
For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for
chip select.
* tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (79 commits)
arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS
arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
arm64: dts: qcom: sm8250: further split of spi pinctrl config
arm64: dts: qcom: sm8250: split spi pinctrl config
arm64: dts: qcom: sdm845-db845c: Enable ov8856 sensor and connect to ISP
arm64: dts: qcom: sdm845-db845c: Configure regulators for camss node
arm64: dts: qcom: sdm845: Add CAMSS ISP node
arm64: dts: qcom: pm8150: Enable RTC
arm64: dts: qcom: sm8350-mtp: Add PMICs
arm64: dts: qcom: pmr735B: Add base dts file
arm64: dts: qcom: pmr735a: Add base dts file
arm64: dts: qcom: pm8350c: Add base dts file
arm64: dts: qcom: pm8350b: Add base dts file
arm64: dts: qcom: pm8350: Add base dts file
arm64: dts: qcom: pmk8350: Add base dts file
arm64: dts: qcom: sm8350: Add spmi node
arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x
dt-bindings: arm: qcom: Add SM8350 HDK
arm64: dts: qcom: sc7180: Drop duplicate dp_hot_plug_det node in trogdor
arm64: dts: qcom: sm8350: fix number of pins in 'gpio-ranges'
...
Link: https://lore.kernel.org/r/20210404164914.712946-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add DT for fan control on SolidRun Clearfog GT8k platform
Add syscon compatible to NB clk node allowing improving cpufreq
support on Armada 37xx
Add support for UTMI PHY allowing removing kernel dependency from the
boot loader for UBS port connected to this PHY (Armada 7K, 8K and
CN91xx)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYGeE7AAKCRALBhiOFHI7
1RLbAJ9PYflp+wQ8QZRza75fOOsvfY9m2ACfRe+U9StkSx9+wD6lxiTcUiYbjfc=
=OYlz
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.13 (part 1)
Add DT for fan control on SolidRun Clearfog GT8k platform
Add syscon compatible to NB clk node allowing improving cpufreq
support on Armada 37xx
Add support for UTMI PHY allowing removing kernel dependency from the
boot loader for UBS port connected to this PHY (Armada 7K, 8K and
CN91xx)
* tag 'mvebu-dt64-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: enable CP110 UTMI PHY usage
arm64: dts: marvell: add support for Marvell CP110 UTMI PHY
arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
arm64: dts: marvell: clearfog-gt-8k: add cooling maps
arm64: dts: marvell: clearfog-gt-8k: add pwm-fan
Link: https://lore.kernel.org/r/874kgocs7t.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYGchiwAKCRDj7w1vZxhR
xW1/APsFH9bywTduCrsuJui1LdD3mVbhkN75tKfBw7Ce8rmloAD/U5dth8PKA4h6
yPCdc2k0XaK7ItcD3eveN2uwiNq89gU=
=Ktsz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
* tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: beelink-x2: Add power button
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out
ARM: dts: sun4i: Add support for Topwise A721 tablet
dt-bindings: arm: Add Topwise A721
arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc
arm64: dts: allwinner: Use the new r_intc binding
ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
ARM: dts: sunxi: h3/h5: Add r_intc node
ARM: dts: sunxi: Use the new r_intc binding
Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC,
- LED support for the Falcon development board,
- Preparatory display pipeline support for the R-Car V3U SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYGbVawAKCRCKwlD9ZEnx
cEgrAP9eZ3MAYaiATSSPB4KvErvRYc9dqMgHWfHX7Su+LpyPZAD/ViFlg1drXMNV
HNo3oZUWTChPek4zbe7EUcjpLhWzawk=
=fkRt
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.13 (take two)
- Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC,
- LED support for the Falcon development board,
- Preparatory display pipeline support for the R-Car V3U SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: ulcb: Add cpu-supply property to a57_0 node
arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 node
arm64: dts: renesas: r8a77950: Drop operating points above 1.5 GHz
arm64: dts: renesas: r8a779a0: Fix PMU interrupt
arm64: dts: renesas: r8a779a0: Add VSPD support
arm64: dts: renesas: r8a779a0: Add FCPVD support
arm64: dts: renesas: falcon-cpu: Add GP LEDs
arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodes
ARM: dts: koelsch: Configure pull-up for SOFT_SW GPIO keys
arm64: dts: renesas: falcon: Move AVB0 to main DTS
arm64: dts: renesas: falcon: Move watchdog config to CPU board DTS
arm64: dts: renesas: falcon: Move console config to CPU board DTS
Link: https://lore.kernel.org/r/cover.1617359678.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Although every Beelink GS1 seems to have external 32768 Hz oscillator,
it works only on one from four tested. There are more reports of RTC
issues elsewhere, like Armbian forum.
One Beelink GS1 owner read RTC osc status register on Android which
shipped with the box. Reported value indicated problems with external
oscillator.
In order to fix RTC and related issues (HDMI-CEC and suspend/resume with
Crust) on all boards, switch to internal oscillator.
Fixes: 32507b8681 ("arm64: dts: allwinner: h6: Move ext. oscillator to board DTs")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210330184218.279738-1-jernej.skrabec@siol.net
Commit 941432d007 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.
However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.
Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.
Fixes: 941432d007 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Ashley <contact@victorianfox.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przywara@arm.com
The macros for the clock and reset indices for the RSB hardware block
were replaced with raw numbers when the RSB controller node was added.
This was done to avoid cross-tree dependencies.
Now that both the clk and DT changes have been merged, we can switch
back to using the macros.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
mvebu fixes for 5.12 (part 1)
2 fixes on on turris-omnia (Armada 38x based:)
- Fix storm interrupt
- Enable hardware buffer management as it should be
Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms
* tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
ARM: dts: turris-omnia: fix hardware buffer management
Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"
Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enabling the Display panel for beryllium requires DSI
labibb regulators and panel dts nodes to be added.
It is also required to keep some of the regulators as
always-on.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210404194437.537011-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add coresight components found on SC7280 SoC.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/de07324628f88900b72357f4ef7f0c7db7e3409d.1615832893.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the IPCC DT node which is used to send and receive IPC
signals with remoteprocs for SC7280 SoC.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/8374f407386209d2e7891763de3fa2450a14ad60.1615832893.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add device trees for OnePlus 5 (cheeseburger) and 5T (dumpling)
MSM8998 SoC smartphones with initial support included for:
- UFS internal storage
- USB peripheral mode
- Display
- Touch
- Bluetooth
- Hall effect sensor
- Power and volume buttons
- Capacitive keypad button backlight (on cheeseburger)
Signed-off-by: Jami Kettunen <jamipkettunen@gmail.com>
Link: https://lore.kernel.org/r/20210406010708.2376807-2-jamipkettunen@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This was already the case for ADSP and SLPI remoteprocs & doesn't affect
existing boards where it has been re-enabled.
Signed-off-by: Jami Kettunen <jamipkettunen@gmail.com>
Link: https://lore.kernel.org/r/20210406010708.2376807-3-jamipkettunen@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move rmtfs memory region so that it does not overlap with system
RAM (kernel data) when KAsan is enabled. This puts rmtfs right
after mba_mem which is not supposed to increase beyond 0x94600000
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Link: https://lore.kernel.org/r/20210330014610.1451198-1-sujitka@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is a trgodor variant, required to have sound node variable
for coachz specific platform.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210314061054.19451-3-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add dai link for supporting lpass I2S driver, which is used
for audio capture and playback.
Add lpass-cpu node with pin controls and i2s primary
and secondary dai-links.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210314061054.19451-2-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RNG (Random Number Generator) in SM8350 features PRNG EE (Execution
Environment), hence add devicetree support for it.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210401101536.1014560-1-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add regulator devices for SC7280 as RPMh regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1617192339-3760-4-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable support for CP110 UTMI PHY in Armada SoC family platform
device trees.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add support for Marvell CP110 UTMI PHY in a CP11x DTSI
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The driver part of this support was not merged which leads to break
AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported
by Marcin Wojtas.
So for now let's remove it in order to fix the issue waiting for the
driver part really be merged.
This reverts commit 53e950d597.
Fixes: 53e950d597 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add "syscon" compatible to the North Bridge clocks node to allow the
cpufreq driver to access these registers via syscon API.
This is needed for a fix of cpufreq driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: e8d66e7927 ("arm64: dts: marvell: armada-37xx: add nodes...")
Cc: stable@vger.kernel.org
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add cooling maps suitable for a Noctua NF-A4/10 fan attached to the
heat sink. The fan will toggle between two speeds in operation which
seems to be normal behaviour. More fine-grained steps may help to
reduce this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add pwm-fan support for controlling the fan speed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
After the node name of "snps,dwc3" has been corrected to start with "usb"
in fsl,imx8mp-dwc3.yaml. Its name in dts should be modified accordingly.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210329072714.2135-3-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and
Frequency Scaling (DVFS) can change the CPU core voltage.
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210326105009.1574424-3-geert+renesas@glider.be
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and
Frequency Scaling (DVFS) can change the CPU core voltage.
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210326105009.1574424-2-geert+renesas@glider.be
The higher operating frequencies for the Cortex-A57 CPU cores, which
were first documented in the R-Car Gen3 Hardware User's Manual revision
0.54, apply to R-Car H3 ES2.0 (r8a77951).
Play it safe and restrict R-Car H3 ES1.x to 1.5 GHz, by removing the
"turbo-mode" entries from the operating points table inherited from
r8a77951.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210311110552.3124180-1-geert+renesas@glider.be
This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.
-----BEGIN PGP SIGNATURE-----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=4Hys
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree fixes for v5.12-rc6
This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.
* tag 'tegra-for-5.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Move clocks from RT5658 endpoint to device node
arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
arm64: tegra: Set fw_devlink=on for Jetson TX2
arm64: tegra: Add unit-address for ACONNECT on Tegra186
Link: https://lore.kernel.org/r/20210401172622.3352990-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.
-----BEGIN PGP SIGNATURE-----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=b/Gg
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno updates for v5.13
Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.
* tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable more SMMUs
arm64: dts: juno: Describe PCI dma-ranges
Link: https://lore.kernel.org/r/20210331100410.cenuhvpqoumvsk52@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Dong Aisheng to update i.MX8Q device trees for adopting
SS (SubSystems) based bindings.
- New board support: Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
Collector interrupt, update MTD partitions and add rtc0 alias for
ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj8eYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7Lygf9EHqZZOU7WA0nmmsBM9qJcEmY32aY
XV+9MAqnCDKGoSWtbsApJBft3/SnzRVa+cUiLfUKt3iGaTGpB6xWnHQjnmmJr4zU
aXbrjnR9C4z+xo2P6DvreVs2t6lIj/OI8S2M3nolROfHFQ05/c25+fcWnE4sbnNQ
4y8PQJ4hWaBkerMZEnFZLY4MDAJbJduQP2rnQ3vW4P1K2Be/4iw9luYEMUnZZ7K6
jVLOa7eaPiWZGi7TnxPm+GYHnoGVoFI4dKMkv1rdfpgSGn77yIXquyYPgCuHvgv2
XuroZCKex2mpE/JIsr+hdGHIAjp/nS+OTbR5tlQtpUFuBb77ZPG8yERIxQ==
=2phP
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.13:
- A series from Dong Aisheng to update i.MX8Q device trees for adopting
SS (SubSystems) based bindings.
- New board support: Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
Collector interrupt, update MTD partitions and add rtc0 alias for
ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.
* tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits)
arm64: dts: fsl-ls1028a-kontron-sl28: add rtc0 alias
arm64: dts: ls1028a: move rtc alias to individual boards
arm64: dts: fsl-ls1028a-kontron-sl28: combine unused partitions
arm64: dts: fsl-ls1028a-kontron-sl28: move MTD partitions
arm64: dts: imx8mp-evk: Improve the Ethernet PHY description
arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
arm64: dts: imx8mq-librem5: Hog the correct gpio
arm64: dts: lx2160a-clearfog-itx: add SFP support
arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART
arm64: dts: imx8mn: Reorder flexspi clock-names entry
arm64: dts: imx8mm: Reorder flexspi clock-names entry
arm64: dts: ls1028a: set up the real link speed for ENETC port 2
arm64: dts: imx8mm-nitrogen-r2: add ecspi2 support
arm64: dts: imx: add imx8qm mek support
arm64: dts: imx: add imx8qm common dts file
arm64: dts: imx8qm: add dma ss support
arm64: dts: imx8: split adma ss into dma and audio ss
arm64: dts: imx8qm: add conn ss support
arm64: dts: imx8qm: add lsio ss support
arm64: dts: imx8: switch to new lpcg clock binding
...
Link: https://lore.kernel.org/r/20210331041019.31345-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
-----BEGIN PGP SIGNATURE-----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=MdDK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
* tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
arm64: dts: broadcom: bcm4908: add Ethernet TX irq
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
arm64: dts: broadcom: bcm4908: fix switch parent node name
arm64: dts: broadcom: bcm4908: describe firmware partitions
arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
arm64: dts: broadcom: bcm4908: describe Ethernet controller
arm64: dts: broadcom: bcm4908: describe USB PHY
Link: https://lore.kernel.org/r/20210330184006.1451315-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Patches from Krzysztof Kozlowski that fixes dtc warnings
and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2
-----BEGIN PGP SIGNATURE-----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=JYZq
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.13
- Patches from Krzysztof Kozlowski that fixes dtc warnings
and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2
* tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: adjust qpsi read-delay property
arm64: dts: intel: socfpga_agilex_socdk_nand: align LED node names with dtschema
arm64: dts: intel: socfpga_agilex: align node names with dtschema
arm64: dts: intel: socfpga_agilex: use defined for GIC interrupts
arm64: dts: intel: socfpga_agilex: move usbphy out of soc node
arm64: dts: intel: socfpga_agilex: remove default status=okay
arm64: dts: intel: socfpga_agilex: move timer out of soc node
arm64: dts: intel: socfpga_agilex: move clocks out of soc node
arm64: dts: intel: socfpga: override clocks by label
Link: https://lore.kernel.org/r/20210330110430.558182-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-4-p.yadav@ti.com
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-3-p.yadav@ti.com
The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-2-p.yadav@ti.com
The MT8183 Pumpkin board is manufactured by OLogic and includes
a MediaTek MT8183 SoC with 2GB of RAM.
The board provides the following IOs:
* 2 USB Type-A ports
* Ethernet
* Serial UART over micro-USB port
* 1 USB Type-C dual role port
* 1 USB Type-C power only port
* 1 Jack for audio
* RPI compatible header
* MT7668 wiresless chip with Wi-Fi AC and BT 5
* Micro-HDMI port
* 2 connectors for CSI cameras
* 1 connector for DSI display
* 1 JTAG port
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210217205945.830006-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/
Commit message taken from commit 0011c6d182 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")
The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
(according to the comments) only used for SDIO.
AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
them enabled. So the alias order should match the previous non-async order
for all of them.
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210203192824.854491-1-alexander.stein@mailbox.org
Kakadu is also known as ASUS Chromebook Detachable CM3.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331091327.1198529-3-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Align the LED node names with dtschema to silence dtbs_check warnings
like:
leds: 'hps0', 'hps1', 'hps2' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Align the NAND, GIC and UART node names with dtschema to silence
dtbs_check warnings like:
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dt.yaml:
intc@fffc1000: $nodename:0: 'intc@fffc1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dt.yaml:
serial0@ffc02000: $nodename:0: 'serial0@ffc02000' does not match '^serial(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Use human-readable defines for GIC interrupt type and flag, instead of
hard-coding the numbers. It makes review easier. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The usual usb-nop-xceiv USB phy node should be under root node, to fix
dtc warning:
arch/arm64/boot/dts/intel/socfpga_agilex.dtsi:472.21-476.5:
Warning (simple_bus_reg): /soc/usbphy@0: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The ARM architected timer is part of ARM CPU design therefore by
convention it should not be inside the soc node. This also fixes dtc
warning like:
arch/arm64/boot/dts/intel/socfpga_agilex.dtsi:410.9-416.5:
Warning (simple_bus_reg): /soc/timer: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The clocks are usually not part of the SoC but provided on the board
(external oscillators). Moving them out of soc node fixes dtc warning:
arch/arm64/boot/dts/intel/socfpga_agilex.dtsi:111.10-137.5:
Warning (simple_bus_reg): /soc/clocks: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
sm8350 has 29 thermal sensors split across two tsens controllers. Add
the thermal zones to expose them and wireup the cpus to throttle their
frequencies on crossing passive temperature thresholds.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210324124308.1265626-2-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the first and third qupv3 nodes used to hook
up peripherals on some devices, as well as the iommus properties for all
of them.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210321174522.123036-2-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Apply these fixes to the newly added sm8250 display ndoes
- Remove "notused" interconnect (which apparently was blindly copied from
my old patches)
- Use dispcc node example from dt-bindings, removing clocks which aren't
documented or used by the driver and fixing the region size.
Fixes: 7c1dffd471 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[DB: compatibility changes split into separate patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210329120051.3401567-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
On most BCM4908 devices MAC address can be read from the bootloader
binary section containing device settings. Use NVMEM to describe that.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Due to power domain controller is added, the power domain's
phanle is also changed from 'scpsys' to 'spm', but forget to
modify pmic node's
Fixes: 8b6562644d ("arm64: dts: mediatek: Add mt8173 power domain controller")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/1616048328-13579-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add two passive trip points at 68°C and 80°C for the CPU temperature.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add thermal zone node to Mediatek MT8183 dts file.
Evaluate the thermal zone every 500ms while not cooling
and every 100ms when passive cooling is performed.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This is used to fix dtbs_check warning:
harmonize node names and compatibles;
add property "usb-role-switch" for connector dependence.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210316092232.9806-8-chunfeng.yun@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Should use PPI No.7 for the PMU. Otherwise, the perf command didn't
show any information.
Fixes: 834c310f54 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210325041949.925777-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Three general purpose LEDs are provided on the Falcon CPU board.
Connect GP_LED1, GP_LED2, and GP_LED3 to the gpio-leds frameworks as
indicator LEDs.
These LEDs are arranged in a block of four LEDs on the board itself, but
the fourth LED is as yet unidentified.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20210322172013.1152121-1-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fix address of the pad control register
(IOMUXC_SW_PAD_CTL_PAD_SD1_DATA0) for SD1_DATA0_GPIO2_IO2. This seems
to be a typo but it leads to an exception when pinctrl is applied due to
wrong memory address access.
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: c1c9d41319 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm")
Fixes: 748f908cc8 ("arm64: add basic DTS for i.MX8MQ")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The aliases are board-specific and shouldn't be included in the common
SoC dtsi. Move them over to the boards.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The failsafe partitions for the DP firmware and for AT-F are unused. If
AT-F will ever be supported in the failsafe mode, then it will be a FIT
image. Thus fold the unused partitions into the failsafe bootloader one
to have enough storage if the bootloader image will grow.
While at it, remove the reserved partition. It served no purpose other
than having no hole in the map.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the MTD partitions to the partitions subnode. This is the new way
to specify the partitions, see
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the datasheet RTL8211, it must be asserted low for at least
10ms and at least 72ms "for internal circuits settling time" before
accessing the PHY registers.
Add properties to describe such requirements.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 99e71c0292 ("arm64: dts: imx8mq-librem5: Don't mark buck3 as always on")
removed always-on marking from GPU regulator, which is great for power
saving - however it introduces additional i2c0 traffic which can be deadly
for devices from the Dogwood batch.
To workaround the i2c0 shutdown issue on Dogwood, this commit marks
buck3 as always-on again - but only for Dogwood (r3).
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There was an additional alias in the specifier it hogged line 27
instead of line 1.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add 2x2 SFP+ cage support for clearfog-itx boards.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With the first redesign the debug UART had changed from
UART2 to UART1.
As the first hardware revision is considered as alpha and
will not be supported in future. The old setup will not
be preserved.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jon Hunter